• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

KAKINO Yoshiaki  垣野 義昭

ORCIDConnect your ORCID iD *help
Researcher Number 00026204
Affiliation (based on the past Project Information) *help 1995 – 2003: Kyoto University, Graduate School of Engineering, Professor, 工学研究科, 教授
1999: 京都大学, 大学院・工学研究科, 教授
1994: 京都大学, 工学部, 教授
1989 – 1992: 京都大学, 工学部, 教授
Review Section/Research Field
Principal Investigator
機械工作・生産工学 / 機械工作 / Production engineering/Processing studies
Except Principal Investigator
機械工作・生産工学 / 機械要素
Keywords
Principal Investigator
工作機械 / リニアモータ / 送り駆動系 / サーボ系 / 高能率加工 / 高速加工 / feed drive system / 高速・高能率加工 / ハイリードボールねじ / 複合工作機械 … More / 工程集約 / 変種変量生産 / オンザマシン計測 / 修正加工 / Positioning error / Circular tests / Kinematic parameter / Calibration / Parallel kinematic machine tool / 位置決め誤差 / 円弧運動試験 / 機構パラメータ / キャリブレーション / パラレル機構工作機械 / linear guideway / CNC machine tools / Pneumatic control system / Damping control / Servo control system / 直道ガイド / 直動ガイド / CNC工作機械 / 油圧制御系 / 振動減衰 / Serro System / Vibration / Damping Control / High Speed Machining / Feed Drives / Machine Tools / Linear Motor / 高速・高精度 / リニアモーター / 振動 / 減衰制御 / リニアモーターカー / high speed high acceleration machining / high lead ball screw / multi-function machine tools / integrated process / agile manufacturing system / 工具寿命 / 残留振動 / high acceleration rate / high speed feed / machine tools / linear motor / サーボ特性 / 高加速度 / 高速送り / 送り駆除系 / high speed, high productive machining / ball screw with high lead / multi-functional machine tools / process concentration / agile manufacturing / 送り系 / 主軸系 / 高速・高能率生産 / CBN wheel / Form error / Dimensional error / Surface roughness / Machined error / On-the-machine Measurement / Amendable Machining / 偏差検出型測定 / 変位検出型プロ-ブ / 研削加工 / 仕上面あらさ / CBN砥石 / 形状誤差 / 寸法誤差 / 仕上面あらき / 加工形状誤差 / 加工条件データベース / 工具管理 / 加工精度 … More
Except Principal Investigator
CNC Machine Tools / Servo System / CNC工作機械 / サーボ系 / 工作機械 / CBN Grinding / Grinding / Hard Finishing / Ball Screw Drive / Guide / Vibration Control / Linear Motor / Vibration / 非線形制御 / 油圧ブレーキ / ボールねじ送り系 / ガイド / 減衰制御 / リニアモータ / 振動 / Adaptire Control / Machining Model / Cutting Force / エンドミル加工 / 送り駆動系 / 適応制御 / 加工モデル / 切削抵抗 / calibration / servo motor / ball screw / machining process / machine tool / parallel mechanism / DBB法 / 運動精度 / キャリブレーション / サーボモータ / ボールねじ / 切削加工 / パラレルメカニズム / Gear Quality / gear quality / CBN grinding / grinding / Gear quality Less
  • Research Projects

    (12 results)
  • Research Products

    (1 results)
  • Co-Researchers

    (12 People)
  •  Kinematic Calibration of a Parallel Mechanism Machine ToolPrincipal Investigator

    • Principal Investigator
      IBARAKI Soichi, 垣野 義昭
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kyoto University
  •  High Speed and High Precision Feed Drive of NC Machine Tools by Dual Actuation

    • Principal Investigator
      MATSUBARA Atsushi
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  Intelligent Guideways to Improve Servo Control Performance of NC Machine ToolsPrincipal Investigator

    • Principal Investigator
      KAKINO Yoshiaki
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  A Research on the Analysis and Design of CNC Servo System Considering the Machining Process

    • Principal Investigator
      MATSUBARA Atsushi
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  A Study on High Speed and High Accurate Machining by Using Linear Motor Applied Machine ToolsPrincipal Investigator

    • Principal Investigator
      KAKINO Yoshiaki
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  STUDY FOR METAL CUTTING MACHINE TOOLS USING PARALLEL MECHANISM

    • Principal Investigator
      IHARA Yukitoshi
    • Project Period (FY)
      1997 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  Study on high speed, high productive machining by machine tools developed for the agile manufacturing systemPrincipal Investigator

    • Principal Investigator
      KAKINO Yoshiaki
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  R&D of the machine tools with the linear motorsPrincipal Investigator

    • Principal Investigator
      KAKINO Yoshiaki
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  A Study on Multi-functional Machine Tools for Agile ManufacturingPrincipal Investigator

    • Principal Investigator
      KAKINO Yoshiaki
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      KYOTO UNIVERSITY
  •  除去加工用修正加工システムの知能化・高度化に関する研究Principal Investigator

    • Principal Investigator
      垣野 義昭
    • Project Period (FY)
      1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Kyoto University
  •  Study on the Amendable Machining SystemPrincipal Investigator

    • Principal Investigator
      KAKINO Yoshiaki
    • Project Period (FY)
      1990 – 1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Kyoto University
  •  Generating CBN Grinding of 3 Dimensional Curved Surface of Machine Parts

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Kyoto University

All 2004

All Patent

  • [Patent] パラレルメカニズム型工作機械の切削抵抗推定方法2004

    • Inventor(s)
      垣野 義昭, 松原 厚, 茨木 創一, 奥田 敏宏, 中川 昌夫
    • Industrial Property Rights Holder
      垣野 義昭, 松原 厚, 茨木 創一, 奥田 敏宏, 中川 昌夫
    • Industrial Property Number
      2004-186980
    • Filing Date
      2004-06-24
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560094
  • 1.  MATSUBARA Atsushi (80243054)
    # of Collaborated Projects: 9 results
    # of Collaborated Products: 0 results
  • 2.  IHARA Yukitoshi (90213199)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 3.  TAKESHITA Torao
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 4.  IBARAKI Soichi (80335190)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  FUJIWARA Akihiko
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 6.  KARITA Atsuji
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 7.  KUBO Aizoh (10027899)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 8.  FUJIO Hiroshige (90026097)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 9.  NAKAGAWA Heizaburou (50033345)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  KARITA Mitsuji
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  NAKAMURA Shinya
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  NAKAGAWA Masao
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi