TOYODA Masao 豊田政男

… Alternative Names

豊田政男トヨダマサオ

Less

Researcher Number	00029191
Other IDs
Affiliation (Current)	2025: 大阪大学, その他部局等, 名誉教授
Affiliation (based on the past Project Information) *help	2006: Osaka University, Department of Materials and Manufacturing Science, Professor, 大学院工学研究科, 教授 2005: 大阪大学, 大学院・工学研究科, 教授 1993 – 1997: 大阪大学, 工学部, 教授 1989 – 1990: Osaka University, Faculty of Engineering, Professor, 工学部, 教授 1988: 大阪大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator Material processing/treatments / 溶接工学 Except Principal Investigator Naval and maritime engineering / Metal making engineering / 船舶構造・建造
Keywords	Principal Investigator CTOD試験 / Local Approach / 多層溶接継手 / ローカルアプローチ / The Weakest Link Model / Structural Reliability Evaluation / Tempering Effect / CTOD Test / Local Brittle Zone (LBZ) / Multi-Layered Weld HAZ … More / TMCP Steel for Offshore Structures / 構造信頼性 / HAZ組織と破壊靱性 / HAZ粗粒域 / 多層HAZ靱性 / 最弱リンクモデル / 構造信頼性評価 / テンパ-効果 / 局部劣化部(LBZ) / 多層溶接熱影響部 / 極地構造用TMCP鋼 / Material Design / Stress-Strain analysis / Controlling Microstructure / Fracture Toughness / Brittle Fracture / Local Heterogeneity / Dual-Phase Steels / 応力・歪解析 / 局部的劣化部 / 溶接熱影響部 / 高強度鋼 / 破壊靭性 / 材料設計 / 応力・ひずみ解析 / 組織制御 / 破壊靱性 / 脆性破壊 / 局部的不均質 / 二相組織鋼 / CTOD Testing / Constraint Effect / Fracture Performance / HAZ Fracture Toughness / Strength Mis-Matching / Offshore Structures / High Strength Steel Welds / き裂湾曲現象 / 海洋構造用高強度鋼 / 塑性拘束 / 継手破壊性能 / HAZ靭性 / 強度ミスマッチング / 海洋構造物 / 高強度鋼溶接部 … More Except Principal Investigator 残留応力 / 溶接変形 / residual stress / welded joint / in-process control / welded structure / fabricating precision / distortion control / temperature distribution / weld distortion / 溶接継手 / インプロセス制御 / 溶接構造物 / 工作精度 / 変形制御 / 温度分布 / Diffraction plane / Young's modulus / Inherent stress theory / Inherent strain / Substrate / X-ray diffraction method / Residual stress / Ag vapor deposited film / ピーク強度 / 半価幅 / X線回折 / イオンプレーティング / X線応力係数 / X線回析 / 真空蒸着 / Ag薄膜 / 回折面 / ヤング率 / 固有応力論 / 固有歪 / 基材 / X線応力回折法 / Ag蒸着薄膜 / Fatigue Strength / Boxing Weld / Welding Residual Stress / Welding Deformation / ISUM Rectangular Plate Element / Ultimate Strength / Structural Reliability / Design Permitting Buckling / 信頼性評価 / 理想化構造要素法 / HT係数 / 座屈強度 / 高品質軽量化船 / 高張力鋼 / 疲労強度 / かどまきすみ肉 / 溶接残留応力 / 理想化矩形板要素 / 最終強度 / 構造信頼性 / 座屈許容設計 Less

Active In-Process Control and Fabricating Precision Improvement of Weld Distortion by Using Temperature Distribution Control
- Principal Investigator
  
  MOCHIZUKI Masahito
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Osaka University
Mechanical Approach to Fracture Toughness Improvement for High Strength Steel and Its Weld HAZ by Controlling Morphology of MicrostructurePrincipal Investigator
- Principal Investigator
  
  TOYODA Masao
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  Osaka University
STUDY ON INHERENT STRESS OF VAPORIZED Ag FILM ON THE LASER REFLECTING MIRROR
- Principal Investigator
  
  SATOH Susumu
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Metal making engineering
- Research Institution
  NAGASAKI INSTITUTE OF APPLIED SCIENCE
Evaluation Procedure for High Strength Steels for Offshore Structures Considering Strength Mis-Matching in WeldsPrincipal Investigator
- Principal Investigator
  
  TOYODA Masao
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  Osaka University
High Quality Light Weight Ship Using Ultra High Tensile Steels
- Principal Investigator
  
  UEDA Yukio
- Project Period (FY)
  1989 – 1991
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  船舶構造・建造
- Research Institution
  Osaka University
Evaluation Method for Fracture Performance of Offshore Structural Steel WeldsPrincipal Investigator
- Principal Investigator
  
  TOYODA Masao
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  溶接工学
- Research Institution
  Osaka University

All 2007 2006 2005

All Journal Article

[Journal Article] 溶接金属の変態膨張による角変形低減に及ぼす溶接入熱条件の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第3報)2007
- Author(s)
  三上欣希, 望月正人, 豊田政男
- Journal Title
  
  溶接学会論文集第25巻,第1号
  
  Pages: 68-73
- NAID
  10030884155
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 溶接継手の角変形挙動に及ぼす溶接金属の変態膨張特性の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第2報)2007
- Author(s)
  三上欣希, 望月正人, 豊田政男
- Journal Title
  
  溶接学会論文集第25巻,第1号
  
  Pages: 59-67
- NAID
  10030884148
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Effect of Heat Input Condition on Reduction of Angular Distortion by Transformation Expansion of Weld Metals-Welding Distortion Control by Transformation Expansion of Weld Metals (Report 3),2007
- Author(s)
  Y.Mikami, M.Mochizuki, M.Toyoda
- Journal Title
  
  Quarterly Journal of Japan Welding Society Vol.25, No.1
  
  Pages: 68-73
- NAID
  10030884155
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Weld Distortion Control during Welding Process with Reverse-Side Heating,2007
- Author(s)
  M.Mochizuki, M.Toyoda
- Journal Title
  
  Transactions of the ASME, Journal of Engineering Materials and Technology Vol.129, No.2
  
  Pages: 265-270
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Effect of Characteristics of Transformation Expansion of Weld Metals on Angular Distortion Behavior of Welded Joints-Welding Angular Distortion Control by Transformation Expansion of Weld Metals (Report 2),2007
- Author(s)
  Y.Mikami, M.Mochizuki, M.Toyoda
- Journal Title
  
  Quarterly Journal of Japan Welding Society Vol.25, No.1
  
  Pages: 59-67
- NAID
  10030884148
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 溶接金属の変態膨張による角変形低減に及ぼす溶接入熱条件の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第3報)2007
- Author(s)
  三上欣希, 望月正人, 豊田政男
- Journal Title
  
  容接学会論文集第25巻,第1号
  
  Pages: 68-73
- NAID
  10030884155
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Reduction of Angular Distortion by Transformation Expansion of Weld Metals in Joints with External Restraints-Welding Angular Distortion Control by Transformation Expansion of Weld Metals (Report 4),2007
- Author(s)
  Y.Mikami, M.Mochizuki, M.Toyoda
- Journal Title
  
  Quarterly Journal of Japan Welding Society Vol.25, No.1
  
  Pages: 74-79
- NAID
  10030884161
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 溶接継手の角変形挙動に及ぼす溶接金属の変態膨張特性の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第2報)2007
- Author(s)
  三上欣希, 望月正人, 豊田政男
- Journal Title
  
  熔接学会論文集第25巻,第1号
  
  Pages: 59-67
- NAID
  10030884148
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 外的拘束下での溶接金属の変態膨張による角変形低減効果-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第4報)2007
- Author(s)
  三上欣希, 望月正人, 豊田政男
- Journal Title
  
  溶接学会論文集第25巻,第1号
  
  Pages: 74-79
- NAID
  10030884161
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Study on Angular Distortion Reduction by Temperature Distribution Control Using Back Heating Source-Studies on Welding Distortion Control by Temperature Distribution Control Using Multiple Heat Sources (Report 2),2007
- Author(s)
  S.Okano, M.Mochizuki, M.Toyoda
- Journal Title
  
  Quarterly Journal of Japan Welding Society Vol.25, No.1
  
  Pages: 95-105
- NAID
  10030884217
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 裏面加熱源を用いた温度場制御による角変形低減支配因子に関する検討複数熱源を用いた温度場制御による溶接変形制御手法に関する研究-第2報2007
- Author(s)
  岡野成威, 望月正人, 豊田政男
- Journal Title
  
  溶接学会論文集第25巻,第1号
  
  Pages: 95-105
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Weld Distortion Control during Welding Process with Reverse-Side Heating2007
- Author(s)
  M.Mochizuki, M.Toyoda
- Journal Title
  
  Transactions of the ASME, Journal of Engineering Materials and Technology Vol. 129, No. 2
  
  Pages: 265-270
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Distortion Behavior during In-Process Control Welding by Additional Cooling2006
- Author(s)
  M.Mochizuki, H.Yamasaki, S.Okano, M.Toyoda
- Journal Title
  
  Welding in the World Vol. 50, No. 5/6
  
  Pages: 46-50
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Distortion Behavior during In-Process Control Welding by Additional Cooling,2006
- Author(s)
  M.Mochizuki, H.Yamasaki, S.Okano, M.Toyoda
- Journal Title
  
  Welding in the World Vol.50, No.5/6
  
  Pages: 46-50
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Measurement and Numerical Simulation of Angular Distortion of Fillet Welded T-Joint-Welding Angular Distortion Control by Transformation Expansion of Weld Metals (Report 1),2006
- Author(s)
  Y.Mikami, Y.Morikage, M.Mochizuki, M.Toyoda
- Journal Title
  
  Quarterly Journal of Japan Welding Society Vol.24, No.4
  
  Pages: 312-323
- NAID
  110004851658
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Metallurgical and Mechanical Heterogeneity in Weld Materials Considering Multiple Heat Cycles and Phase Transformation,2006
- Author(s)
  M.Toyoda, M.Mochizuki, Y.Mikami
- Journal Title
  
  Materials Science Forum, ISBN : 0.87849-996-2 Vol.512
  
  Pages: 19-24
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Thermal Conductivity Theoretical Examination Concerning Characteristics of Welding Distortion Produced by Multiple Heat Sources-Studies on Welding Distortion Control by Temperature Distribution Control Using Multiple Heat Sources (Report 1),2006
- Author(s)
  S.Okano, M.Mochizuki, M.Toyoda
- Journal Title
  
  Quarterly Journal of Japan Welding Society Vol.24, No.4
  
  Pages: 324-330
- NAID
  110004851659
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Application of Numerical Simulation Considering the Effect of Phase Transformation to the Estimation of Hardness Distribution in Welds2006
- Author(s)
  Y.Mikami, M.Mochizuki, M.Toyoda
- Journal Title
  
  Materials Science Forum, ISBN 0-87849-996-2 512
  
  Pages: 379-382
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 複数熱源による溶接変形特性に関する熱伝導論的検討-複数熱源を用いた温度場制御による溶接変形制御手法に関する研究(第1報)2006
- Author(s)
  岡野成威, 望月正人, 豊田政男
- Journal Title
  
  溶接学会論文集第24巻,第4号
  
  Pages: 324-330
- NAID
  110004851659
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Application of Numerical Simulation Considering the Effect of Phase Transformation to the Estimation of Hardness Distribution in Welds,2006
- Author(s)
  Y.Mikami, M.Mochizuki, M.Toyoda
- Journal Title
  
  Materials Science Forum, ISBN : 0-87849-996-2 Vol.512
  
  Pages: 79-382
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Metallurgical and Mechanical Heterogeneity in Weld Materials Considering Multiple Heat Cycles and Phase Transformation2006
- Author(s)
  M.Toyoda, M.Mochizuki, Y.Mikami
- Journal Title
  
  Materials Science Forum, ISBN 0-87849-996-2 512
  
  Pages: 19-24
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] T型すみ肉溶接継手の角変形挙動の計測実験と数値解析-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第1報)2006
- Author(s)
  三上欣希, 森影康, 望月正人, 豊田政男
- Journal Title
  
  溶接学会論文集第24巻,第4号
  
  Pages: 312-323
- NAID
  110004851658
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Active In-Process Control of Welding Distortion by Reverse-Side Heating2005
- Author(s)
  M.Mochizuki, G.B.An, M.Toyoda
- Journal Title
  
  Key Engineering Materials(Trans Tech Publication Ltd., Uetikon-Zuerich, Switzerland) ISBN 0-87849-978-4 297-300
  
  Pages: 2784-2789
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Continuous Measurement and Three-dimensional FEM Simulation of Transient Distortion in Welded Joint with Low-temperature Transformation Welding Wire,2005
- Author(s)
  Y.Mikami, Y.Morikage, M.Mochizuki, M.Toyoda
- Journal Title
  
  Proceedings of the 4th German-Japanese Seminar on Materials, Processes and Components(Karlsruhe, Germany) No.12
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Study of Residual Stress Distribution at Start-Finish Point of Circumferential Welding Studied by 3D-FEM Analysis2005
- Author(s)
  M.Mochizuki, J.Katsuyama, R.Higuchi, M.Toyoda
- Journal Title
  
  Welding in the World 49-11/12
  
  Pages: 40-49
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 超狭開先アーク溶接部の硬さ分布特性の数値シミュレーション・溶接熱サイクルおよび組織分率の数値シミュレーションによる溶接部の硬さ分布特性評価に関する研究(第1報)2005
- Author(s)
  三上欣希, 望月正人, 中村照美, 平岡和雄, 豊田政男
- Journal Title
  
  溶接学会論文集 23-4
  
  Pages: 558-563
- NAID
  110003496132
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Challenge to Active In-Process Control of Welding Distortion2005
- Author(s)
  M.Mochizuki, M.Toyoda
- Journal Title
  
  Mathematical Modelling of Weld Phenomena 7(Edited by H.Cerjak, TU Graz Publishing, Graz, Austria) ISBN 3-901351-99-X 7
  
  Pages: 697-711
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Challenge to Active In-Process Control of Welding Distortion,2005
- Author(s)
  M.Mochizuki, M.Toyoda
- Journal Title
  
  Mathematical Modeling of Weld Phenomena 7(Edited by H.Cerjak)(TU Graz Publishing, Graz, Austria)
  
  Pages: 697-711
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 多重熱サイクルを受ける溶接金属の組織分率と硬さ分布特性の評価-溶接熱サイクルおよび組織分率の数値シミュレーションによる溶接部の硬さ分布特性評価に関する研究(第2報)2005
- Author(s)
  三上欣希, 望月正人, 橋場裕治, 長谷川俊永, 大北茂, 豊田政男
- Journal Title
  
  溶接学会論文集 23-4
  
  Pages: 564-570
- NAID
  110003496133
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Active In-Process Control of Welding Distortion by Reverse-Side Heating2005
- Author(s)
  M.Mochizuki, G.B.An, M.Toyoda
- Journal Title
  
  Key Engineering Materials (Uetikon-Zuerich, Switzerland, ISBN 0-87849-978-4) (Trans Tech Publication Ltd.) 297-300
  
  Pages: 2784-2789
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Numerical Simulation of Hardness Distribution in Welds of Ultra-Narrow Gap GMA Welding-Evaluation of Hardness Distribution in Welds by Numerical Simulation of Weld Thermal Cycles and Fraction of Microstructure (Report 1),2005
- Author(s)
  Y.Mikami, M.Mochizuki, T.Nakamura, K.Hiraoka, M.Toyoda
- Journal Title
  
  Quarterly Journal of the Japan Welding Society (in Japanese) Vol.23, No.4
  
  Pages: 558-563
- NAID
  110003496132
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 超狭開先アーク溶接部の硬さ分布特性の数値シミュレーション-溶接熱サイクルおよび組織分率の数値シミュレーションによる溶接部の硬さ分布特性評価に関する研究(第1報)2005
- Author(s)
  三上欣希, 望月正人, 中村照美, 平岡和雄, 豊田政男
- Journal Title
  
  溶接学会論文集 23-4
  
  Pages: 558-563
- NAID
  110003496132
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Continuous Measurement and Three-dimensional FEM Simulation of Transient Distortion in Welded Joint with Low-temperature Transformation Welding Wire2005
- Author(s)
  Y.Mikami, Y.Morikage, M.Mochizuki, M.Toyoda
- Journal Title
  
  Proceedings of the 4th German-Japanese Seminar on Materials, Processes and Components, No. 12, Karlsruhe, Germany 12
  
  Pages: 12-12
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Continuous Measurement and Three-dimensional FEM Simulation of Transient Distortion in Welded Joint with Low-temperature Transformation Welding Wire2005
- Author(s)
  Y.Mikami, Y.Morikage, M.Mochizuki, M.Toyoda
- Journal Title
  
  Proceedings of the 4th German-Japanese Seminar on Materials, Processes and Components, No.12, Karlsruhe, Germany 12
  
  Pages: 12-12
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Evaluation of Fraction of Microstructure and Hardness Distribution in Weld Metal Subjected to Multiple Thermal Cycles-Evaluation of Hardness Distribution in Welds by Numerical Simulation of Weld Thermal Cycles and Fraction of Microstructure (Report 2),2005
- Author(s)
  Y.Mikami, M.Mochizuki, Y.Hashiba, T.Hasegawa, S.Ohkita, M.Toyoda
- Journal Title
  
  Quarterly Journal of the Japan Welding Society (in Japanese) Vol.23, No.4
  
  Pages: 564-570
- NAID
  110003496133
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Study of Residual Stress Distribution at Start-Finish Point of Circumferential Welding Studied by 3D-FEM Analysis,2005
- Author(s)
  M.Mochizuki, J.Katsuyama, R.Higuchi, M.Toyoda
- Journal Title
  
  Welding in the World Vol.49, No.11/12
  
  Pages: 40-49
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] 多重熱サイクルを受ける溶接金属の組織分率と硬さ分布特性の評価-溶接熱サイクルおよひ〓組織分率の数値シミュレーションによる溶接部の硬さ分布特性評価に関する研究(第2報)2005
- Author(s)
  三上欣希, 望月正人, 橋場裕治, 長谷川俊永, 大北茂, 豊田政男
- Journal Title
  
  溶接学会論文集 23-4
  
  Pages: 564-570
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Active In-Process Control of Welding Distortion by Reverse-Side Heating,2005
- Author(s)
  M.Mochizuki, G.B.An, M.Toyoda
- Journal Title
  
  Key Engineering Materials(Trans Tech Publication Ltd., Uetikon-Zuerich, Switzerland) Vols.297-300
  
  Pages: 2784-2789
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360418
[Journal Article] Challenge to Active In-Process Control of Welding Distortion2005
- Author(s)
  M.Mochizuki, M.Toyoda
- Journal Title
  
  Mathematical Modelling of Weld Phenomena 7 (Graz, Austria, ISBN 3-901351-99-X) (Edited by H. Cerjak) (TU Graz Publishing) 7
  
  Pages: 697-711
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360418

1. MINAMI Fumiyoshi (60135663)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
2. HAGIWARA Yukito

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
3. SUZUKI Shuichi

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. UEDA Yukio (30029037)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. OKADA Hiroo (90081398)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. TOYOSADA Masahiro (30188817)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. YAO Tetsuya (20029284)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. NAKACHO Keiji (10112070)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MURAKAWA Hidekazu (60166270)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. SATOH Susumu (20103400)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. MOCHIZUKI Masahito (10304015)

# of Collaborated Projects: 1 results

# of Collaborated Products: 39 results
12. HIGUCHI Ryota (20379126)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
13. 冨田康光 (30029251)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. KURIHARA Masayoshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. NAKANO Yoshifumi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. NAGAE Moriyasu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. KAWABATA Fumimaru

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. ARIMOCHI Kazushige

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. AMANO Keiichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. KAIHARA Syoichiro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. SHIMIZU Masato

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. 工藤純一

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. 渡辺之

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

TOYODA Masao 豊田 政男

豊田 政男 トヨダ マサオ

Research Projects

Research Products

Co-Researchers

Active In-Process Control and Fabricating Precision Improvement of Weld Distortion by Using Temperature Distribution Control

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Mechanical Approach to Fracture Toughness Improvement for High Strength Steel and Its Weld HAZ by Controlling Morphology of MicrostructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STUDY ON INHERENT STRESS OF VAPORIZED Ag FILM ON THE LASER REFLECTING MIRROR

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation Procedure for High Strength Steels for Offshore Structures Considering Strength Mis-Matching in WeldsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High Quality Light Weight Ship Using Ultra High Tensile Steels

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation Method for Fracture Performance of Offshore Structural Steel WeldsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 溶接金属の変態膨張による角変形低減に及ぼす溶接入熱条件の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第3報)2007

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 溶接継手の角変形挙動に及ぼす溶接金属の変態膨張特性の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第2報)2007

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Effect of Heat Input Condition on Reduction of Angular Distortion by Transformation Expansion of Weld Metals-Welding Distortion Control by Transformation Expansion of Weld Metals (Report 3),2007

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] Weld Distortion Control during Welding Process with Reverse-Side Heating,2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] Effect of Characteristics of Transformation Expansion of Weld Metals on Angular Distortion Behavior of Welded Joints-Welding Angular Distortion Control by Transformation Expansion of Weld Metals (Report 2),2007

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] 溶接金属の変態膨張による角変形低減に及ぼす溶接入熱条件の影響-溶接金属の変態膨張による溶接角変形低減手法に関する研究(第3報)2007

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] Reduction of Angular Distortion by Transformation Expansion of Weld Metals in Joints with External Restraints-Welding Angular Distortion Control by Transformation Expansion of Weld Metals (Report 4),2007

Author(s)

Journal Title

NAID

Description

Data Source

TOYODA Masao 豊田政男

豊田政男トヨダマサオ