• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

NONAKA Tetsuya  野中 鉄也

ORCIDConnect your ORCID iD *help
Researcher Number 00180761
Other IDs
Affiliation (based on the past Project Information) *help 2008: 京都大学, 大学院・工学研究科, 助教
2007 – 2008: Kyoto University, 工学研究科, 助教
2005 – 2006: Kyoto University, Research associate, 工学研究科, 助手
2000 – 2002: 京都大学, 工学研究科, 助手
1995 – 1997: 京都大学, 工学研究科, 助手
1991 – 1994: 京都大学, 工学部, 助手
Review Section/Research Field
Except Principal Investigator
設計工学・機械要素・トライボロジー / Design engineering/Machine functional elements/Tribology / 機械要素
Keywords
Except Principal Investigator
歯車 / Gear / 精度検定 / Laser / レーザ / 損傷予知 / 歯当たり / Involute artifact / Virtual machine / Accuracy of tooth flank from … More / Accuracy inspection / インボリュートアーティファクト / バーチャルマシン / 歯形精度 / Repeatability / Measuring Error / Heterodyne Interferometry / Non-Contacting Measuring Method / 3-Dimensional Curved Surface / Calibrating Method / Second Master / 歯車精度保証 / 曲面形状精度 / レーザ測定 / 2次原器 / マスターアーティファクト / 精度基準原器 / トレーサビリティー / インボリュート形状 / 測定誤差 / 再現性 / 精度 / ヘテロダイン干渉法 / インボリュート曲線 / 2次マスター / Gear quality / Contaminant / Damage / Strength / Reliability / Micro machine / 歯面強度 / マイクロ歯車 / 損傷モード / 歯車精度 / コンタミナント / 損傷 / 強度 / 信頼性 / マイクロマシン / Tooth Flank Form / CCD Image Sensor / Digital Data / Data Processing / Phase / Computer Holographic Measurement / Interferometry / 形状誤差 / 干渉計 / 精度測定 / 形状偏差 / 位相シフト法 / 位相差 / 歯車歯面形状 / CCDイメージセンサ / デジタルデータ / 画像処理 / 位相 / コンピュータホログラフィック測定 / 斜入射干渉法 / Failure prediction / Designing method / Pattern recognition / Tooth contact pattern / Gears / 設計法 / パターン認識 / Failure Prediction / Transmission Error / Simulation / Tooth Contact pattern / Bevel Gear / Hypoid Gear / シミュレ-ション / シミュレーション / 伝達誤差 / かさ歯車 / ハイポイドギヤ / 計測 / 校正 / 原器 / 超精密計測 Less
  • Research Projects

    (7 results)
  • Co-Researchers

    (7 People)
  •  Evaluation method of gear-measuring instrument using artifact with nano-meter accuracyPrincipal Investigator

    • Principal Investigator
      KOMORI Masaharu, 野中 鉄也, KUBO Aizoh
    • Project Period (FY)
      2006 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Kyoto University
  •  Inspection system of gear measuring machine by virtual gear checker

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      2003 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Kyoto University
  •  Development of High-Efficiently Calibrating Method of the Second Master with 3-Dimensional Curved Surface

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      2000 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Failure mode analysis of micro machine gears and the limitation of micronization

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Computer Holographic Measurement of Machine Parts by Laser Interferometry

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1994 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Prediction of Gear Performance based on Recognition of Tooth Contact Pattern

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      KYOTO UNIVERSITY
  •  Fundamental research on performance and failure prediction for hypoid/bevel gears

    • Principal Investigator
      KUBO Aizoh
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      KYOTO UNIVERSITY
  • 1.  KUBO Aizoh (10027899)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 2.  FUJIO Hiroshige (90026097)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 3.  KOMORI Masaharu (90335191)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 4.  TAKATSUJI Toshiyuki (20357362)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  YABE Hiroshi (30025936)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 6.  吉住 恵一
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 7.  佐藤 孝
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi