Furutani Katsushi 古谷克司

… Alternative Names

FURUTANI Katsushi 古谷克司

Less

Researcher Number	00238685
Other IDs
Affiliation (Current)	2025: 豊田工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2007 – 2025: Toyota Technological Institute, Faculty of Engineering, Professor 2004 – 2006: 豊田工業大学, 工学部, 助教授 2000 – 2002: 豊田工業大学, 工学部, 助教授 1998 – 2001: Toyota Technological Institute, Granduate School of Engineering, Associate Professor, 大学院・工学研究科, 助教授 1999: 豊田工業大学, 工学研究科, 助教授 … More 1998: 助教授 1996 – 1997: Toyota Technological Institute, School of Engineering, Lecturer, 大学院・工学研究科, 講師 1996: Toyota Technological Institute, School of Engineering, Lecturer, 大学院工学研究科, 講師 1994 – 1995: 豊田工業大学, 工学部, 講師 1993: Toyoda Institute of Technology, Department of Engineering, Associate, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies / 機械工作・生産工学 / Dynamics/Control / Intelligent mechanics/Mechanical systems / Design engineering/Machine functional elements/Tribology / Science and Engineering Except Principal Investigator 機械工作・生産工学 / Basic Section 19010:Fluid engineering-related / Basic Section 19020:Thermal engineering-related / Material processing/treatments / Intelligent mechanics/Mechanical systems / 機械力学・制御工学
Keywords	Principal Investigator 放電加工 / 位置決め / 圧電素子 / 精密加工 / parallel mechanism / 泡 / 放電 / 絶縁体 / ガラス / piezoelectric element … More / フィードバック / パラレル機構 / positioning / 電解 / 真空 / ヒステリシス / 粉末 / ワイヤソー / 研磨加工 / 月惑星探査 / ニッケル / その場観察 / 月・惑星探査 / 岩石 / ソーワイヤ / 砥粒加工 / 切断 / 張力 / 形状加工 / 電流波形 / 板ばね / 力制御 / 非円形状 / 電解放電加工 / 静電気 / 焼結 / 放電回路 / 溶融 / 堆積加工 / 微細加工 / 積層造形 / 帯電 / ツイン電極 / 走査 / 粉末床溶融結合 / 付加製造技術 / bubble / precision part manufacturing / glass / machining and manufacturing / マイクロバブル / 精密部品加工 / 機械工作・生産工学 / nanometer cutting / calibration / linear drive mechanism / attitude control / coarse and fine motion / nanotechnology / ナノ加工 / 校正 / 直動機構 / 姿勢制御 / 粗微動機構 / ナノテクノロジー / atomic force microscope / noise reduction / inverse transfer function compensation / hysteresis / induced charge / センシング / 状態認識 / 電荷制御 / 運動精度 / 原子間力顕微鏡 / ノイズ低減 / 逆伝達関数補償 / 誘導電荷 / robot / electrical discharge machining / end effector / precision machining / パラレルメカニズム / パラレルメタニズム / ロボット / エンドエフェクタ / 進行波 / 空気圧 / 多相 / 搬送 / 薄板 / 非接触 / 空気流 / 穴加工 / 液膜 / 水溶性 / ケイ酸ナトリウム / メゾマシン / 残留振動 / クランプ / 慣性力 / シミュレーション / マニピュレーション / 振動 / 摩擦 / パルス密度変調 / 移動機構 / 圧電アクチュエータ / 回転電極 / 放電位置 / 分散 / 加工液 / 堆積 / 付着加工 / 相互相関 / 三次元形状 / 三角形分割 / マニピュレータ / 較正用基準立体 / 形状評価 / 機上計測 … More Except Principal Investigator 放電表面処理 / ワイヤ放電加工 / インチワ-ム機構 / 放電加工 / 高周波 / シンセティックジェット / 圧縮性流れ / 流体制御 / 真空 / 接触 / 熱抵抗 / 真空中の伝熱 / 低圧雰囲気の伝熱 / 転動体 / クヌッセン流 / 分子運動 / 低圧力雰囲気 / 球面 / 接触熱抵抗 / electric resister / gap condition control in EDM / discharge pressure / wire-EDM / insulating ceramics / surface modification by EDM / discharge in fluid / sinking electrical discharge machining (EDM) / 形彫り放電加工 / 抵抗体 / 放電環境制御 / 放電圧力 / 絶縁性セラミックス / 液中放電 / 型彫り放電加工 / Surface Modification by EDM / Wire Electrical Discharge Grinding / Wire Electrical Discharge Machine(EDM) / ワイヤ放電研削 / Dot-matirix method / Silicon electrode / Powder mixed oil / Discharge dispersion / Wear resistance / Structure elements / Surface modification / Electrical discharge machining / 加工状態認識 / 工作機械 / エンドエフエクタ / 複合加工 / 部品加工 / 機能材料 / 形状創成 / エンドエフェクタ / ロボット / マシニングセンタ / ドットマトリクス / 圧粉体電極 / 表面処理 / ドットマトリックス / シリコン電極 / 粉末混入加工液 / 放電分散 / 耐磨耗性 / 構造部材 / 表面改質 / piezoelectric element / linear drive mechanism / three-dimensional shaping / repid prototyping / electrical discharge machining / リニアドライブ / ワイヤ電極 / 微細加工 / 圧電素子 / 直動機構 / 三次元形状創成 / ラピッドプロトタイピング / Guide elements / Feed elements / Nanometer accuracy / Ultraprecision Positioning / 位置決め / 超精密 / 案内要素 / 送り要素 / ナノメータ / 超精密位置決め Less

高周波放電を用いた選択的マイクロ放電固化による金属積層造形法Principal Investigator
- Principal Investigator
  
  古谷克司
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Toyota Technological Institute
Development of high-speed and high-efficiency ultrasonic-driven synthetic-jet actuator operating at high-frequency
- Principal Investigator
  
  半田太郎
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 19010:Fluid engineering-related
- Research Institution
  Toyota Technological Institute
次世代月惑星科学探査のためのマルチワイヤソー研磨法における真空中加工現象の解明Principal Investigator
- Principal Investigator
  
  古谷克司
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Toyota Technological Institute
Heat transfer at the contact point of rolling and heat generating elements
- Principal Investigator
  
  Takeno Keiji
- Project Period (FY)
  2019 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 19020:Thermal engineering-related
- Research Institution
  Toyota Technological Institute
Precision machining of non-circular section on insulated materials with lathe-type electrochemical discharge machine by shape-feedbackPrincipal Investigator
- Principal Investigator
  
  Furutani Katsushi
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Toyota Technological Institute
Additive Manufacturing Method with Metal Powder by Selective Sintering and Melting Using Micro Electrical DischargePrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Toyota Technological Institute
Development of Non-contact Conveyance Method of Thin Plate by Using Non-resonance Multiple-Phase AirflowPrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Toyota Technological Institute
Development of lath-type electro-chemical discharge machining for small insulated parts manufacturingPrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Toyota Technological Institute
Precision machining of insulated materials by electro-chemical discharge machining in electrolyte containing enriched micro bubblesPrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Toyota Technological Institute
Development of Meso/Micro/Nano Manipulators Employing AZARASHI (Seal) MechanismPrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  2004 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Toyota Technological Institute
Development of nanostructure manipulator employing parallel mechanismPrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsuhi
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Toyota Technological Institute
粉末混入加工液を用いた液中放電表面処理法による機能表層および微小構造体の形成Principal Investigator
- Principal Investigator
  
  古谷克司
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Toyota Technological Institute
Explanation, of coating phenomena through electrical discharge in working fluid and its application to ceramics forming process
- Principal Investigator
  
  MOHRI Naotake
- Project Period (FY)
  1999 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  The University of Tokyo
  Toyota Technological Institute
ノンプロセス機能制御による走行ワイヤ工具の開発と複合精密加工への応用
- Principal Investigator
  
  MOHRI Naotake
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  機械工作・生産工学
- Research Institution
  The University of Tokyo
  Toyota Technological Institute
Development of Piezoelectric Actuator by Feedback of Induced ChargePrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Dynamics/Control
- Research Institution
  Toyota Technological Institute
Precision Machining by Local Machining Station MethodPrincipal Investigator
- Principal Investigator
  
  FURUTANI Katsushi
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Toyota Technological Institute
多面体較正法による放電加工機上での三次元形状評価システムの開発Principal Investigator
- Principal Investigator
  
  古谷克司
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Dynamics/Control
- Research Institution
  Toyota Technological Institute
Three-dimensional Shaping by Dot-matrix Electrical Discharge Machining with Miniaturized Electrode Feeding Devices
- Principal Investigator
  
  MOHRI Naotake
- Project Period (FY)
  1994 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Toyota Technological Institute
Functional Surface Modification by Forced Discharge Dispersion.
- Principal Investigator
  
  MOHRI Naotake
- Project Period (FY)
  1994 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Toyota Technological Institute
ローカル・マシニング・ステーション方式放電加工機による精密加工Principal Investigator
- Principal Investigator
  
  古谷克司
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Toyota Technological Institute
Study of Nanometer Accuracy Positioning in Consideration of Feed Element and Guide Elements
- Principal Investigator
  
  OTSUKA Jiro
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械力学・制御工学
- Research Institution
  Shizuoka Institute of Science and Technology
  Tokyo Institute of Technology

[Book] 新製品開発における軽薄短小化への新技術(第1章第14節小型位置決め装置のための圧電アクチュエータ技術, pp.100-107)2012
- Author(s)
  古谷克司, ほか
- Publisher
  技術情報協会
- Data Source
  KAKENHI-PROJECT-16078214
[Book] アクチュエータ研究開発の最前線(第1編第2章圧電アクチュエータ, pp.29-38 ; 古谷克司 : 第2編第1章第2節アザラシ型位置決め機構を用いたメゾ/マイクロ/ナノマニピュレータの開発, pp.109-116)2011
- Author(s)
  樋口俊郎, 大岡昌博監修 ; 大岡昌博, 古谷克司, ほか
- Publisher
  エヌ・ティー・エス
- Data Source
  KAKENHI-PROJECT-16078214
[Book] Next-Generation Actuators Leading Breakthroughs (Chapter 3 AZARASHI (Seal) Mechanism for Meso/Micro/Nano Manipulators, pp. 19-30)2010
- Author(s)
  Toshiro Higuchi, Koichi Suzumori, Satoshi Tadokoro (Eds.) ; Katsushi Furutani, ほか
- Publisher
  Springer-Verlag, London, UK
- Data Source
  KAKENHI-PROJECT-16078214
[Book] Next-Generation Actuators Leading Breakthroughs (Chapter 3 AZARASHI (Seal) Mechanism for Meso/Micro/Nano Manipulators) ; Toshiro Higuchi, Koichi Suzumori, Satoshi Tadokoro (Eds.)2010
- Author(s)
  Katsushi Furutani, ほか
- Total Pages
  438
- Publisher
  Springer-Verlag, London, UK
- Data Source
  KAKENHI-PROJECT-16078214
[Book] 実用精密位置決め技術事典2008
- Author(s)
  古谷克司
- Publisher
  産業技術サービスセンター
- Data Source
  KAKENHI-PROJECT-16078214
[Book] 最新機械機器要素技術2008
- Author(s)
  吉川昌範ほか編 ; 古谷克司(分担)
- Publisher
  エヌジーテイー
- Data Source
  KAKENHI-PROJECT-16078214
[Book] 最新機械機器要素技術2008
- Author(s)
  古谷克司
- Publisher
  エヌジーティー
- Data Source
  KAKENHI-PROJECT-16078214
[Book] 実用精密位置決め技術辞典2008
- Author(s)
  精密工学会超精密位置決め専門委員会監修 ; 古谷克司(分担)
- Publisher
  産業技術サービスセンター
- Data Source
  KAKENHI-PROJECT-16078214
[Book] 無鉛圧電セラミックス・デバイス2008
- Author(s)
  日本AEM学会編 ; 古谷克司(分担)
- Publisher
  養賢堂
- Data Source
  KAKENHI-PROJECT-16078214
[Book] 無鉛圧電セラミックス・デバイス2008
- Author(s)
  谷順二,高橋弘文,永田肇,柿本健一,和田智志,野口祐二,道川貞弘,古谷克司
- Publisher
  養賢堂
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Relationship between applied voltage and current waveform in electrochemical discharge machining2020
- Author(s)
  FURUTANI Katsushi
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 86 Issue: 892 Pages: 20-00197-20-00197
- DOI
  10.1299/transjsme.20-00197
- NAID
  130007961469
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K03885
[Journal Article] 多相空気流や超音波浮揚による薄板の非接触搬送2019
- Author(s)
  古谷克司
- Journal Title
  
  超音波TECHNO
  
  Volume: 31 Issue: 6 Pages: 97-100
- Data Source
  KAKENHI-PROJECT-24560171
[Journal Article] 選択的放電固化による積層造形法の基礎検討2019
- Author(s)
  古谷克司, 山岸宏規, 土屋昂敬
- Journal Title
  
  電気加工学会誌
  
  Volume: 53 Issue: 134 Pages: 193-199
- NAID
  130007828380
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05735
[Journal Article] Conveyance Method of Thin Plate by Using Multiple-phase Air Flow2018
- Author(s)
  Katsushi Furutani, Yusuke Nakamura, Akira Urita
- Journal Title
  
  Electronics and Communications in Japan
  
  Volume: 101 Issue: 2 Pages: 51-60
- DOI
  10.1002/ecj.12044
- NAID
  210000173287
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560171
[Journal Article] Conveyance Method of Thin Plate by Using Multiple-phase Air Flow2017
- Author(s)
  古谷克司, 中村祐介, 瓜田明
- Journal Title
  
  IEEJ Transactions on Electronics, Information and Systems
  
  Volume: 137 Issue: 9 Pages: 1145-1152
- DOI
  10.1541/ieejeiss.137.1145
- NAID
  130006038810
- ISSN
  0385-4221, 1348-8155
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560171
[Journal Article] 超音波近接場浮揚を利用した2次元搬送法における駆動力の発生メカニズム2015
- Author(s)
  古谷克司, 小野政貴
- Journal Title
  
  日本AEM学会誌
  
  Volume: 23 Pages: 414-421
- NAID
  130005098689
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560171
[Journal Article] 強制放電分散型電解放電加工の加工特性(第2報)-加工電流の観察-2014
- Author(s)
  古谷克司, 新谷啓行, 村瀬靖男, 荒川修一
- Journal Title
  
  電気加工学会誌
  
  Volume: 48,117 Pages: 6-14
- NAID
  130004756654
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560118
[Journal Article] Performance of Electrochemical Discharge Machining by Forced Discharge Dispersion2014
- Author(s)
  Katsushi Furutani, Hiroyuki Shintani, Yasuo Murase, Shuichi Arakawa
- Journal Title
  
  International Journal of Electrical Machining
  
  Volume: 19 Pages: 9-15
- NAID
  130004493261
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560118
[Journal Article] 微細穴放電加工のためのアザラシ型機構による電極送り機構2014
- Author(s)
  古谷克司, 平岡大輔
- Journal Title
  
  電気加工学会誌
  
  Volume: 48,117 Pages: 15-21
- NAID
  130004756655
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 強制放電分散型電解放電加工の加工特性2013
- Author(s)
  古谷克司, 新谷啓行, 村瀬靖男, 荒川修一
- Journal Title
  
  電気加工学会誌
  
  Volume: 47,116 Pages: 169-176
- NAID
  130005029066
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560118
[Journal Article] Performance of Micro-hole Drilling by Ultrasonic-assisted Electro-chemical Discharge Machining2012
- Author(s)
  M. Rusli, K. Furutani
- Journal Title
  
  Adv. Mater. Res.(Mater. Manuf. Technol. XIV)
  
  Volume: 445 Pages: 865-870
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560134
[Journal Article] Performance of Micro-hole Drilling by Ultrasonic-assisted Electro-Chemical Discharge Machining2012
- Author(s)
  Meifal Rusli, Katsushi Furutani
- Journal Title
  
  Advanced Materials Research
  
  Volume: 445 Pages: 865-870
- DOI
  10.4028/www.scientific.net/amr.445.865
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560134
[Journal Article] 圧電アクチュエータを用いたアザラシ型精密位置決め機構の開発2012
- Author(s)
  古谷克司
- Journal Title
  
  新東技報
  
  Volume: 30 Pages: 65-68
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Prototype of Manipulator for Micro Objects Employing AZARASHI (Seal) Mechanism as Mobile Platforms2011
- Author(s)
  Katsushi Furutani, Taizo Makino
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 5 Pages: 823-831
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Simulation of the Performance of a Piezoelectric Actuator Driven with a Current Pulse2010
- Author(s)
  Katsushi Furutani, Atsushi Furuta
- Journal Title
  
  Advanced Robotics
  
  Volume: 24 Pages: 1945-1961
- NAID
  10028168303
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Influence of Slope Angle and Traction Load on Performance of AZARASHI (Seal) Mechanism with One Degree of Freedom2010
- Author(s)
  Katsushi Furutani, ほか
- Journal Title
  
  IEEJ Transactions on Electrical and Electronic Engineering
  
  Volume: 5 Pages: 181-187
- NAID
  10027368574
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 慣性力により摩擦力を制御するアザラシ型精密位置決め機構の移動特性2010
- Author(s)
  古谷克司, ほか
- Journal Title
  
  精密工学会誌
  
  Volume: 76 Pages: 679-683
- NAID
  130000421849
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Comparison of Driving Performance of Piezoelectric Actuator - Current Pulse Drive and Voltage Linear Drive -2009
- Author(s)
  Katsushi Furutani, Atsushi Furuta
- Journal Title
  
  Service Robotics and Mechatronics
  
  Pages: 183-188
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Influence of Matrix Circuit Switching Device Junction Capacitance on Piezoelectric Actuator Drive Performance2009
- Author(s)
  Katsushi Furutani, Taizo Makino
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 3 Pages: 313-318
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 電流パルス駆動によるアザラシ型位置決め機構の高分解能化2008
- Author(s)
  古谷克司
- Journal Title
  
  精密工学会誌 74
  
  Pages: 411-415
- NAID
  110006657107
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Displacement Monitoring of Stacked Piezoelectric Actuator by Observing Induced Charge2008
- Author(s)
  K. Furutani, N. Ohta
- Journal Title
  
  International Journal of Automation Technology 2(1)
  
  Pages: 12-17
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 電流パルス駆動によるアザラシ型位置決め機構の高分解能化2008
- Author(s)
  古谷克司,太田徳幸,古田淳
- Journal Title
  
  精密工学会誌 74,4
  
  Pages: 411-415
- NAID
  110006657107
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 非鉛圧電アクチュエータの技術動向と応用2007
- Author(s)
  古谷克司
- Journal Title
  
  日本AEM学会誌 15,4
  
  Pages: 391-398
- NAID
  110006532951
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 非鉛圧電アクチュエータの技術動向と応用(解説)2007
- Author(s)
  古谷克司
- Journal Title
  
  日本AEM学会誌 15(4)
  
  Pages: 391-398
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電効果を用いたセンサ2006
- Author(s)
  古谷克司
- Journal Title
  
  計測と制御 45,4
  
  Pages: 296-301
- NAID
  10018113434
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電アクチュエータ精密位置決めへの応用(解説)2006
- Author(s)
  古谷克司
- Journal Title
  
  精密工学会誌 72, 4
  
  Pages: 449-452
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] A driving method of piezoelectric actuator using current pulses2006
- Author(s)
  Katsushi Furutani, Katsuhiko Iida
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 17 Pages: 2387-2394
- NAID
  130004657790
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電アクチュエータ技術の動向と将来展望2006
- Author(s)
  古谷克司
- Journal Title
  
  Material Stage
  
  Volume: 5,12 Pages: 37-42
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 次世代アクチュエータの最新動向2006
- Author(s)
  古谷克司
- Journal Title
  
  機械設計
  
  Volume: 50,9 Pages: 47-51
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 3自由度アザラシ型位置決め機構の移動特性の改善2006
- Author(s)
  古谷克司, 河越克己
- Journal Title
  
  電気学会論文誌E編 126, 4
  
  Pages: 131-136
- NAID
  10017538724
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電アクチュエータを用いた一方向ブレーキ機構2006
- Author(s)
  古谷克司,波多野誠,金山尚樹
- Journal Title
  
  精密工学会誌 72,3
  
  Pages: 377-381
- NAID
  110004656743
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] Driving method of piezoelectric actuator by using current pulse2006
- Author(s)
  K. Furutani, K. Iida
- Journal Title
  
  Meas. Sci. Technol. 17,9
  
  Pages: 2387-2394
- NAID
  130004657790
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] A driving method of piezoelectric actuator using current pulses2006
- Author(s)
  Katsushi Furutani, Katsuhiko Iida
- Journal Title
  
  Measurement Science and Technology 17, 9
  
  Pages: 2387-2394
- NAID
  130004657790
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] はじめての精密工学 : 圧電アクチュエータ-精密位置決めへの応用2006
- Author(s)
  古谷克司
- Journal Title
  
  精密工学会誌 72,4
  
  Pages: 449-452
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電アクチュエータ技術の動向と将来展望(解説)2006
- Author(s)
  古谷克司
- Journal Title
  
  Material Stage 5, 12
  
  Pages: 37-42
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 3自由度アザラシ型位置決め機構の移動特性の改善2006
- Author(s)
  古谷克司,河越克己
- Journal Title
  
  電気学会論文誌,E編 126,4
  
  Pages: 131-136
- NAID
  10017538724
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電効果を用いたセンサ(解説)2006
- Author(s)
  古谷克司
- Journal Title
  
  計測と制御 45, 4
  
  Pages: 296-301
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 圧電アクチュエータを用いた一方向ブレーキ機構2006
- Author(s)
  古谷克司, 波多野誠, 金山尚樹
- Journal Title
  
  精密工学会誌 72, 3
  
  Pages: 377-381
- NAID
  110004656743
- Data Source
  KAKENHI-PROJECT-16078214
[Journal Article] 次世代アクチュエータの最新動向(解説)2006
- Author(s)
  古谷克司
- Journal Title
  
  機械設計 50, 9
  
  Pages: 47-51
- Data Source
  KAKENHI-PROJECT-16078214
[Patent] 移動機構2008
- Inventor(s)
  古谷克司,松野晋
- Industrial Property Rights Holder
  古谷克司,松野晋
- Acquisition Date
  2008-08-01
- Data Source
  KAKENHI-PROJECT-16078214
[Patent] 圧電素子駆動装置および駆動方法2004
- Inventor(s)
  古谷克司,宗片睦夫
- Industrial Property Rights Holder
  古谷克司,宗片睦夫
- Filing Date
  2004-12-02
- Data Source
  KAKENHI-PROJECT-16078214
[Patent] 圧電素子駆動装置および圧電素子の駆動方法2004
- Inventor(s)
  古谷克司, 宗片睦夫
- Industrial Property Rights Holder
  豊田工大, ナノコントロール
- Industrial Property Number
  2004-349474
- Filing Date
  2004-12-02
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 月環境における岩石サンプル加工2023
- Author(s)
  古谷克司，大谷拓也，高西淳夫，河野功，春山純一
- Organizer
  第7回重力天体（月火星）着陸探査シンポジウム
- Invited
- Data Source
  KAKENHI-PROJECT-22K03867
[Presentation] End-effector for Machining of Rock with Saw-wire for Lunar and Planetary Explorations2023
- Author(s)
  K. Furutani, T. Otani, A. Takanishi, I. Kawano, J. Haruyama
- Organizer
  7th Global Moon Village Workshop and Symposium, Kurashiki, Okayama, Japan
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K03867
[Presentation] 月・惑星探査のためのワイヤソーを用いた岩石加工用エンドエフェクタ2023
- Author(s)
  古谷克司，大谷拓也，高西淳夫，河野功，春山純一
- Organizer
  2023年度精密工学会秋季大会学術講演会講演論文集，福岡市東区
- Data Source
  KAKENHI-PROJECT-22K03867
[Presentation] 月縦孔内その場観察のための岩石加工への無酸素環境の影響2022
- Author(s)
  古谷克司，犬飼亮太
- Organizer
  第66回宇宙科学技術連合講演会
- Data Source
  KAKENHI-PROJECT-22K03867
[Presentation] 電解放電加工における印加電圧と電流波形との関係2019
- Author(s)
  古谷克司
- Organizer
  日本機械学会第13回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-18K03885
[Presentation] 印加電圧が電解放電加工特性に与える影響2019
- Author(s)
  古谷克司
- Organizer
  平成31年電気学会全国大会
- Data Source
  KAKENHI-PROJECT-18K03885
[Presentation] 放電を利用した金属粉末積層造形法における粉末挙動2017
- Author(s)
  古谷克司，山岸宏規
- Organizer
  平成29年度電気・電子・情報関係学会東海支部連合大会
- Data Source
  KAKENHI-PROJECT-15K05735
[Presentation] 多相空気流を用いた薄板の非接触搬送法(第2報)双方向への搬送2017
- Author(s)
  古谷克司, 中村祐介, 瓜田明
- Organizer
  2017年度精密工学会春季大会学術講演会, 横浜市港北区
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] Fundamental Experiments of Additive Manufacturing Method by Selective Solidification Using Electircal Discharge2017
- Author(s)
  Katsushi Furutani, Takahiro Tsuchiya, Hiroki Yamagishi
- Organizer
  32nd Annual Meeting of American Society for Precision Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05735
[Presentation] Non-contact transfer method of thin plate using multiphase air flow2017
- Author(s)
  Katsushi Furutani, Yusuke Nakamura, Akira Urita
- Organizer
  euspen's 17th International Conference and Exhibition, Hannover, Germany
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] 多相空気流を用いた薄板の非接触双方向搬送法2016
- Author(s)
  古谷克司, 中村祐介, 瓜田明
- Organizer
  第21回知能メカトロニクスワークショップ, 北海道, 函館市
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] 選択的放電固化による積層造形法に関する基礎実験2016
- Author(s)
  古谷克司,土屋昂敬, 山岸宏規
- Organizer
  第128回電気加工研究会
- Place of Presentation
  名古屋工業大学
- Data Source
  KAKENHI-PROJECT-15K05735
[Presentation] 選択的放電固化による積層造形法(第1報)基礎実験2015
- Author(s)
  古谷克司
- Organizer
  2015年度精密工学会秋季大会学術講演会
- Place of Presentation
  宮城県仙台市青葉区・東北大学
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-15K05735
[Presentation] 旋盤型電解放電加工による絶縁性材料の細軸加工2014
- Author(s)
  古谷克司, 荒井和行, 小嶋俊介
- Organizer
  電気加工学会第212回電気加工研究会
- Place of Presentation
  名古屋工業大学(名古屋市昭和区)
- Year and Date
  2014-07-18
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Machining of Nonconductive Thin Rod by Using Lathe-type Electro-chemical Discharge Machine2013
- Author(s)
  K. Furutani, K. Arai, S. Kojima
- Organizer
  16th International Conference on Advances in Materials and Processing Technologies (AMPT2013)
- Place of Presentation
  Grand Hotel (Taipei, Taiwan)
- Year and Date
  2013-09-23
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] 旋盤型電解放電加工によるガラスの加工(第3報)細軸加工のための電極送り2012
- Author(s)
  古谷克司, 小嶋俊介
- Organizer
  2012年度精密工学会春季予稿
- Place of Presentation
  東京都八王子市
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Performance of Wire-Sawing of Glass Assisted by Electro-Chemical Discharge2012
- Author(s)
  K. Furutani, M. Tomoto
- Organizer
  Proc. 15th Int. Conf. Precis
- Place of Presentation
  Awaji, Hyogo, Japan
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Mechanism of Driving Force Generation in Two-Dimensional Non-Contact Transfer Method by Near-Field Ultrasonic Levitation2012
- Author(s)
  Katsushi Furutani
- Organizer
  27th Annual Meeting of American Society for Precision Engineering
- Place of Presentation
  San Diego, CA, USA
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] Development of Transfer Device with Damper for Suppression of Reflected Wave2012
- Author(s)
  Katsushi Furutani
- Organizer
  5th International Conference on Positioning Technology
- Place of Presentation
  Taiwan
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] 旋盤型電解放電加工によるガラスの加工(第3報)細軸加工のための電極送り2012
- Author(s)
  古谷克司
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  東京都八王子市・首都大学東京
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] アザラシ型機構による電極送り機構を用いた複数の微細穴の同時放電加工2012
- Author(s)
  古谷克司
- Organizer
  電気加工学会全国大会(2012)
- Place of Presentation
  北九州市小倉北区
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] 旋盤型電解放電加工機を用いた加速度センサの試作2012
- Author(s)
  古谷克司, 小嶋俊介
- Organizer
  平成24年電気学会産業応用部門大会予稿
- Place of Presentation
  千葉県習志野市
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] アザラシ型機構による電極送り機構を用いた複数の微細穴の同時放電加工2012
- Author(s)
  古谷克司, 平岡大輔, 武田幸三, 池内秀樹
- Organizer
  電気加工学会全国大会(2012)
- Place of Presentation
  西日本総合展示場新館会議室(北九州市小倉北区)
- Year and Date
  2012-12-06
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Measurement of Machining Force in Lathe Type Electro-chemical Discharge Machine2011
- Author(s)
  Katsushi Furutani
- Organizer
  11th euspen International Conference
- Place of Presentation
  Spazio Villa Erba, Cernobbio, Italy
- Year and Date
  2011-05-26
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Measurement of Machining Force in Lathe Type Electro-chemical Discharge Machine2011
- Author(s)
  K. Furutani, K. Arai
- Organizer
  Proc. 11th Int. Conf. European Soc. Precis
- Place of Presentation
  Como, Italy
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Performance of Micro-hole Drilling by Ultrasonic-assisted Electro-Chemical Discharge Machining2011
- Author(s)
  M. Rusli, K. Furutani
- Organizer
  Proc. 14th Int. Conf. Adv. Mater. Process. Technol
- Place of Presentation
  Istanbul, Turkey
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Performance of Micro-hole Drilling by Ultrasonic-assisted Electro-Chemical Discharge Machining2011
- Author(s)
  Katsushi Furutani
- Organizer
  14th International Conference on Advances in Materials and Processing Technologies
- Place of Presentation
  Hilton Hotel Istanbul, Istanbul, Turkey
- Year and Date
  2011-07-14
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] アクチュエータ研究の動向と圧電アクチュエータを用いたアザラシ型精密位置決め機構2011
- Author(s)
  古谷克司
- Organizer
  精密工学会・生産自動化専門委員会・研究例会
- Place of Presentation
  中央大学(東京都文京区)
- Year and Date
  2011-12-09
- Invited
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Micromanipulation Applying Local Machining Station Method2011
- Author(s)
  Katsushi Furutani, Taizo Makino
- Organizer
  2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics
- Place of Presentation
  Delta Montreal (Montreal, Quebec, Canada)
- Year and Date
  2011-07-09
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Measurement of Current in Electro-chemical Discharge Machining by Forced Discharge Dispersion2010
- Author(s)
  Katsushi Furutani
- Organizer
  2010 Annual Meeting of American Society for Precision Engineering
- Place of Presentation
  Atlanta, Georgia, USA
- Year and Date
  2010-11-02
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] 旋盤型電解放電加工機によるガラスの加工(第2報)加工力の測定2010
- Author(s)
  荒井和行, 古谷克司
- Organizer
  2010年度精密工学会春季予稿
- Place of Presentation
  さいたま市桜区
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Measurement of Current in Electro-chemical Discharge Machining by Forced Discharge Dispersion2010
- Author(s)
  Katsushi Furutani, Hiroyuki Shintani, Yasuo Murase, Shuichi Arakawa
- Organizer
  2010 Annual Meeting of American Society for Precision Engineering
- Place of Presentation
  Omuni Hotel at CNN Center (Atlanta, Georgia, USA)
- Year and Date
  2010-11-02
- Data Source
  KAKENHI-PROJECT-18560118
[Presentation] 微小物体の把持検出機能を持つマイクロマニピュレーション用ピンセット2010
- Author(s)
  古谷克司
- Organizer
  第22回「電磁力関連のダイナミクス」シンポジウム
- Place of Presentation
  門司港ホテル(北九州市門司区)
- Year and Date
  2010-05-20
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 真空用アクチュエータ2010
- Author(s)
  古谷克司
- Organizer
  第28回日本ロボット学会学術講演会
- Place of Presentation
  名古屋工業大学(名古屋市昭和区)
- Year and Date
  2010-09-22
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Electrode Feeding Device for Micro-hole Electrical Disharge Machining by Using AZARASHI Mechanism2010
- Author(s)
  Katsushi Furutani, Daisuke Hiraoka, Yasuo Murase, Kouzou Takeda
- Organizer
  10th International Conference of the European Society for Precision Engineering & Nanotechnology
- Place of Presentation
  Technical University of Delft (Delft, The Netherlands)
- Year and Date
  2010-06-02
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Electrode Feeding Device for Micro-hole Electrical Discharge Machining by Using AZARASHI Mechanism2010
- Author(s)
  Katsushi Furutani
- Organizer
  10th International Conference of the European Society for Precision Engineering & Nanotechnology
- Place of Presentation
  デルフト工科大学(オランダ・デルフト)
- Year and Date
  2010-06-02
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Measurement of current in electro-chemical discharge machining by forced discharge dispersion2010
- Author(s)
  K. Furutani, H. Shintani, Y. Murase, S. Arakawa
- Organizer
  Proc. 2010 Ann. Meet. Am. Soc. Precis
- Place of Presentation
  Atlanta, Georgia, USA
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] 強制放電分散型電解放電加工の加工特性(第3報)加工形状の観察2010
- Author(s)
  古谷克司, 新谷啓行, 村瀬靖男, 荒川修一
- Organizer
  2010年度精密工学会春季大会学術講演会
- Place of Presentation
  埼玉大学(さいたま市桜区)
- Year and Date
  2010-03-16
- Data Source
  KAKENHI-PROJECT-18560118
[Presentation] 強制放電分散型電解放電加工の加工特性(第3報)加工形状の観察2010
- Author(s)
  古谷克司, 新谷啓之, 村瀬靖男, 荒川修一
- Organizer
  2010年度精密工学会春季予稿
- Place of Presentation
  さいたま市桜区
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] Tweezers for Micromanipulation with Grasp Detection of Small Object2010
- Author(s)
  Katsushi Furutani, Taizo Makino
- Organizer
  ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
- Place of Presentation
  Fairmont The Queen Elizabeth (Montreal, Quebec, Canada)
- Year and Date
  2010-08-16
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 強制放電分散型電解放電加工の加工特性(第3報)加工形状の観察2010
- Author(s)
  古谷克司
- Organizer
  精密工学会
- Place of Presentation
  埼玉大学(さいたま市)
- Year and Date
  2010-03-16
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] アザラシ型精密位置決め機構2010
- Author(s)
  古谷克司
- Organizer
  日本機械学会2010年度年次大会
- Place of Presentation
  名古屋工業大学(名古屋市昭和区)
- Year and Date
  2010-09-06
- Invited
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 圧電アクチュエータとその応用デバイス2009
- Author(s)
  古谷克司
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  東京都文京区
- Year and Date
  2009-03-11
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] アザラシ型機構を用いた細穴放電加工用小型電極送り機構2009
- Author(s)
  古谷克司
- Organizer
  2009年度精密工学会秋季大会学術講演会
- Place of Presentation
  神戸大学(神戸市灘区)
- Year and Date
  2009-09-10
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 圧電アクチュエータとその応用デバイス(予稿)2009
- Author(s)
  古谷克司
- Organizer
  2009年度精密春季
- Place of Presentation
  東京都文京区
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Machining performance of electro-chemical discharge machining by forced discharge dispersion2009
- Author(s)
  K. Furutani, Y. Murase, H. Shintani, S. Arakawa
- Organizer
  Proc. Int. Conf. European Soc. Precis
- Place of Presentation
  San Sebastian, Spain
- Data Source
  KAKENHI-PROJECT-21560134
[Presentation] 摩擦力の差を利用したアザラシ型精密位置決め機構の開発(第11報)LMS方式に基づくマイクロマニピュレーション2009
- Author(s)
  牧野泰三, 古谷克司
- Organizer
  2009年度精密工学会秋季大会学術講演会
- Place of Presentation
  中央大学(東京都文京区)
- Year and Date
  2009-03-12
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Application of AZARASHI (Seal) Positioning Mechanism to Micromanipulation by Vacuum Suction2009
- Author(s)
  Katsushi Furutani
- Organizer
  2009 IEEE Symposium on Optomechatronic Technologies
- Place of Presentation
  軍事博物館(トルコ・イスタンブール)
- Year and Date
  2009-09-21
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Application of AZARASHI (Seal) Positioning Mechanism to Micromanipulation by Vacuum Suction2009
- Author(s)
  Katsushi Furutani, Taizo Makino
- Organizer
  2009 IEEE Symposium on Optomechatronic Technologies
- Place of Presentation
  Military Museum (Istanbul, Turkey)
- Year and Date
  2009-09-21
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 強制放電分散型電解放電加工の加工特性(第2報)放電電流の観察2009
- Author(s)
  古谷克司, 新谷啓行, 村瀬靖男, 荒川修一
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  中央大学(東京都文京区)
- Year and Date
  2009-03-11
- Data Source
  KAKENHI-PROJECT-18560118
[Presentation] Machining performance of electro-chemical discharge machining by forced discharge dispersion2009
- Author(s)
  Katsushi Furutani, Yasuo Murase, Hiroyuki Shintani, Shuichi Arakawa
- Organizer
  9th International Conference of European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Kursaal Conference Centre (San Sebastian, Spain)
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-18560118
[Presentation] Machining performance of electro-chemical discharge machining by forced discharge dispersion2008
- Author(s)
  Katsushi Furutani, et. al.
- Organizer
  2008 Spring Meeting of Japan Society for Precision Engineering
- Place of Presentation
  Ikuta Campus of Meiji University
- Year and Date
  2008-03-17
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560118
[Presentation] アザラシ型位置決め機構を用いたマイクロマニピュレータ2008
- Author(s)
  牧野泰三, 古谷克司
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会
- Place of Presentation
  ビックハット(長野市)
- Year and Date
  2008-06-06
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] シミュレーションによる電流パルスを用いた圧電アクチュエータ駆動の評価2008
- Author(s)
  古谷克司, 古田淳
- Organizer
  第19回「電磁力関連のダイナミクス」シンポジウム
- Place of Presentation
  東京都新宿区・早稲田大学
- Year and Date
  2008-05-17
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 圧電アクチュエータの活用法と各種応用技術-精密位置決めを中心として-2008
- Author(s)
  古谷克司
- Organizer
  超音波モータ連絡会
- Place of Presentation
  東京都中央区・セイコーインスツル日本橋オフィス
- Year and Date
  2008-02-29
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスを用いた圧電アクチュエータ駆動における変位に対する外力の影響のシミュレーション(予稿)2008
- Author(s)
  古谷克司ほか
- Organizer
  第17回MAGDA
- Place of Presentation
  茨城県日立市
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] マトリクス回路を用いた圧電アクチュエータの駆動2008
- Author(s)
  牧野泰三, 古谷克司
- Organizer
  平成20年電気学会産業応用部門大会
- Place of Presentation
  高知市文化プラザかるぽーと(高知県高知市)
- Year and Date
  2008-08-27
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Comparison of Driving Performance of Piezoelectric Actuator - Current Pulse Drive and Voltage Linear Drive -2008
- Author(s)
  K. Furutani
- Organizer
  7th International Conference on Machine Automation (ICMA 2008)
- Place of Presentation
  Awaji, Hyogo, Japan
- Year and Date
  2008-11-27
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Evaluation of Driving Performance of Piezoelectric Actuator with Current Pulse, Proc.2008
- Author(s)
  K. Furutani et al.
- Organizer
  10th Int. Workshop Adv. Motion Cont.
- Place of Presentation
  Trento, Italy
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Performance of AZARASHI (Seal) Positioning Mechanism with Friction Control by Inertial Force2008
- Author(s)
  K. Furutani
- Organizer
  11th International Conference on New Actuators (Actuator 2008)
- Place of Presentation
  Bremen, Germany
- Year and Date
  2008-06-10
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Evaluation of Driving Performance of Piezoelectric Actuator with Current Pulse2008
- Author(s)
  K. Furutani, A. Furuta
- Organizer
  10th IEEE International Workshop on Advanced Motion Control
- Place of Presentation
  Trento, Italy
- Year and Date
  2008-03-27
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 摩擦力の差を利用したアザラシ型精密位置決め機構の開発(第10報)マイクロマニピュレータへの応用2008
- Author(s)
  牧野泰三, 古谷克司
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  川崎市多摩区・明治大学生田キャンパス
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Improvement of Positioning Resolution and Velocity of AZARASHI (SEAL) Mechanism, Proc. 10th Int. Conf.2008
- Author(s)
  K. Furutani et al.
- Organizer
  New Actuators
- Place of Presentation
  Bremen, Germany
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスを用いた圧電アクチュエータ駆動における変位に対する外力の影響のシミュレーション2008
- Author(s)
  古谷克司
- Organizer
  第17回MAGDAコンファレンスin日立講演論文集
- Place of Presentation
  茨城県日立市
- Year and Date
  2008-11-21
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスを用いた圧電アクチュエータの駆動法2008
- Author(s)
  古谷克司
- Organizer
  日本機械学会2008年度年次大会
- Place of Presentation
  横浜市保土ヶ谷区
- Year and Date
  2008-08-04
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 強制放電分散型電解放電加工の加工特性2008
- Author(s)
  古谷克司, ほか
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学生田キャンパス
- Year and Date
  2008-03-17
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560118
[Presentation] Performance of AZARASHI (Seal) Positioning Mechanism with Friction Control by Inertial Force, Proc.2008
- Author(s)
  K. Furutani et al.
- Organizer
  11th Int. Conf. New Actuators
- Place of Presentation
  Bremen, Germany
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 摩擦力の差を利用したアザラシ型精密位置決め機構の開発(第10報)マイクロマニピュレータへの応用2008
- Author(s)
  牧野泰三, 古谷克司
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学(川崎市多摩区)
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] アザラシ型精密位置決め機構2007
- Author(s)
  古谷克司
- Organizer
  第69回スマート・アクチュエータ/センサ委員会
- Place of Presentation
  東京都新宿区・東京理科大学森戸記念館
- Year and Date
  2007-11-25
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 摩擦力の差を利用したアザラシ型精密位置決め機構の開発(第9報)慣性力による摩擦制御を用いた機構の真空中の移動特性2007
- Author(s)
  古谷克司, 磯野秀明
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  北海道旭川市・ときわ市民ホール
- Year and Date
  2007-09-13
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 慣性力により摩擦力を制御するアザラシ型精密位置決め機構の移動特性2007
- Author(s)
  古谷克司, 磯野秀明
- Organizer
  第16回MAGDAコンファレンスin京都講演論文集
- Place of Presentation
  京都市中京区・コープイン京都
- Year and Date
  2007-11-22
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスによる圧電アクチュエータの駆動(第4報)駆動のシミュレーション2007
- Author(s)
  古谷克司, 古田淳
- Organizer
  2007年度精密工学会春季大会学術講演会
- Place of Presentation
  芝浦工業大学(東京都江東区)
- Year and Date
  2007-03-05
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Performance of Driving Method of Piezoelectric Actuator by Using Current Pulse, Proc.2006
- Author(s)
  K. Furutani et al.
- Organizer
  9th IEEE Int. Workshop Adv. Motion Cont.
- Place of Presentation
  Istanbul, Turkey
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Improvement of Positioning Resolution and Velocity of AZARASHI (SEAL) Mechanism2006
- Author(s)
  Katsushi Furutani, Noriyuki Ohta, Katsuhiko Iida
- Organizer
  10th International Conference on New Actuators
- Place of Presentation
  Messe Bremen (Bremen, Germany)
- Year and Date
  2006-06-15
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスによる圧電アクチュエータの駆動(第3報)電圧源による駆動との比較2006
- Author(s)
  古谷克司, 飯田克彦
- Organizer
  2006年度精密工学会春季大会学術講演会
- Place of Presentation
  東京理科大学(千葉県野田市)
- Year and Date
  2006-03-16
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Performance of Driving Method of Piezoelectric Actuator by Using Current Pulse2006
- Author(s)
  Katsushi Furutani, Katsuhiko Iida
- Organizer
  9th IEEE International Workshop on Advanced Motion Control
- Place of Presentation
  Hilton Hotel Istanbul (Istanbul, Turkey)
- Year and Date
  2006-03-27
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスを用いた圧電アクチュエータ駆動のシミュレーション2006
- Author(s)
  古谷克司, 古田淳
- Organizer
  第7回計測自動制御学会システムインテグレーション部門講演会
- Place of Presentation
  札幌コンベンションセンター(札幌市白石区)
- Year and Date
  2006-12-14
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] アザラシ型位置決め機構の高速・高分解能化2006
- Author(s)
  古谷克司, 太田徳幸, 飯田克彦
- Organizer
  第18回「電磁力関連のダイナミクス」シンポジウム
- Place of Presentation
  神戸国際会議場(神戸市中央区)
- Year and Date
  2006-06-11
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Application of AZARASHI (Seal) Mechanism to Fine Motion Stage of Atomic Force Microscope, Proc.2005
- Author(s)
  K. Furutani et al.
- Organizer
  3rd Int. Conf. Leading Edge Manuf. in 21st Century
- Place of Presentation
  Nagoya, Japan
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] One-way Brake Mechanism Using Piezoelectric Actuator, Proc.2005
- Author(s)
  K. Furutani et al.
- Organizer
  IEEE Int. Conf. Mechatron. Autom.
- Place of Presentation
  Niagara Falls, ON, Canada
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] L字形3自由度アザラシ型機構の運動誤差の低減2005
- Author(s)
  古谷克司, 河越克己
- Organizer
  第48回自動制御連合講演会
- Place of Presentation
  JA長野県ビル(長野市)
- Year and Date
  2005-11-25
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスによる圧電アクチュエータの駆動特性2005
- Author(s)
  古谷克司, 飯田克彦
- Organizer
  第17回「電磁力関連のダイナミクス」シンポジウム
- Place of Presentation
  高知市文化プラザかるぽーと(高知市)
- Year and Date
  2005-06-24
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスによる圧電アクチュエータの高分解能駆動2005
- Author(s)
  古谷克司, 飯田克彦
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会2005
- Place of Presentation
  神戸国際会議場(神戸市中央区)
- Year and Date
  2005-06-11
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスによる圧電アクチュエータの駆動2005
- Author(s)
  古谷克司, 宗片睦夫
- Organizer
  2005年度精密工学会春季大会学術講演会
- Place of Presentation
  慶應義塾大学(横浜市港北区)
- Year and Date
  2005-03-05
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 電流パルスによる圧電アクチュエータの駆動(第2報)アザラシ型位置決め機構への適用2005
- Author(s)
  古谷克司, 太田徳幸, 飯田克彦
- Organizer
  2005年度精密工学会秋季大会学術講演会
- Place of Presentation
  京都大学(京都市左京区)
- Year and Date
  2005-09-17
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] Machining Characteristics with Nanometer-cutting Machine Equipped Parallel Mechanism, Proc.2004
- Author(s)
  K. Furutani et al.
- Organizer
  19th Ann. Meet. Am. Soc. Precis. Eng.
- Place of Presentation
  Orlando, FL, USA
- Data Source
  KAKENHI-PROJECT-16078214
[Presentation] 多相空気流を用いた薄板の非接触搬送(第1報)基本構想
- Author(s)
  古谷克司，中村祐介
- Organizer
  2015年度精密工学会春季大会学術講演会
- Place of Presentation
  東京都文京区・東洋大学
- Year and Date
  2015-03-17 – 2015-03-19
- Data Source
  KAKENHI-PROJECT-24560171
[Presentation] 多相空気流を用いた薄板の非接触搬送法の基本構想
- Author(s)
  古谷克司，中村祐介
- Organizer
  第27回「電磁力関連のダイナミクス」シンポジウム
- Place of Presentation
  長崎県佐世保市・ハウステンボス
- Year and Date
  2015-05-14 – 2015-05-15
- Data Source
  KAKENHI-PROJECT-24560171

1. MOHRI Naotake (90126186)

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
2. OTSUKA Jiro (30016787)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. YOSHIMOTO Shigeka (80096718)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. UCHIDA Yoshiyuki (20023187)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. SHIMIZU Shigeo (50061982)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. MORONUKI Nobuyuki (90166463)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. TSUNEKAWA Yoshiki (50148350)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. MASUZAWA Takahisa (60013215)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. ITO Yoshiro (60176378)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. FUKUZAWA Yasushi (10126477)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. SHIMADA Shoichi (20029317)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. INAMURA Toyoshiro (60107539)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. HAYASHI Shinsuke (70005990)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. ARAKAWA Shuichi (90278391)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
15. Takeno Keiji (70705201)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. 青山尚之 (40159306)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. 吉村靖夫 (20042682)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. 白石昌武 (10091860)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. 十合晋一 (90221431)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. 井澤實 (90061720)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. 半田太郎 (30284566)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. 松田佑 (20402513)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. OOIZUMI Toshiro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. FURUYA Masanori

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. SUZUKI Masayuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. MAGARA Tskuji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Furutani Katsushi 古谷 克司

FURUTANI Katsushi 古谷 克司

Research Projects

Research Products

Co-Researchers

高周波放電を用いた選択的マイクロ放電固化による金属積層造形法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of high-speed and high-efficiency ultrasonic-driven synthetic-jet actuator operating at high-frequency

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

次世代月惑星科学探査のためのマルチワイヤソー研磨法における真空中加工現象の解明Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Heat transfer at the contact point of rolling and heat generating elements

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Precision machining of non-circular section on insulated materials with lathe-type electrochemical discharge machine by shape-feedbackPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Additive Manufacturing Method with Metal Powder by Selective Sintering and Melting Using Micro Electrical DischargePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Non-contact Conveyance Method of Thin Plate by Using Non-resonance Multiple-Phase AirflowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of lath-type electro-chemical discharge machining for small insulated parts manufacturingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Precision machining of insulated materials by electro-chemical discharge machining in electrolyte containing enriched micro bubblesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Meso/Micro/Nano Manipulators Employing AZARASHI (Seal) MechanismPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of nanostructure manipulator employing parallel mechanismPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

粉末混入加工液を用いた液中放電表面処理法による機能表層および微小構造体の形成Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Explanation, of coating phenomena through electrical discharge in working fluid and its application to ceramics forming process

Principal Investigator

Project Period (FY)

Furutani Katsushi 古谷克司

FURUTANI Katsushi 古谷克司

[Book] 新製品開発における軽薄短小化への新技術(第1章第14節小型位置決め装置のための圧電アクチュエータ技術, pp.100-107)2012

[Book] アクチュエータ研究開発の最前線(第1編第2章圧電アクチュエータ, pp.29-38 ; 古谷克司 : 第2編第1章第2節アザラシ型位置決め機構を用いたメゾ/マイクロ/ナノマニピュレータの開発, pp.109-116)2011