• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Matsumura Takashi  松村 隆

ORCIDConnect your ORCID iD *help
… Alternative Names

MATSUMURA TAKASHI  松村 隆

MATSUMURA Takashi  松村 隆

Less
Researcher Number 00251710
Other IDs
Affiliation (Current) 2025: 電気通信大学, 大学院情報理工学研究科, 准教授
Affiliation (based on the past Project Information) *help 2012 – 2015: 電気通信大学, 情報理工学(系)研究科, 准教授
2010: 電気通信大学, 大学院・情報理工学研究科, 准教授
2010: 電気通信大学, 情報理工学部, 准教授
2007 – 2009: The University of Electro-Communications, Faculty of Electro-Communications, Associate Professor
2006: 電気通信大学, 電気通信学部, 助教授
1997 – 2000: 電気通信大学, 電気通信学部, 助手
1993 – 1995: 電気通信大学, 電気通信学部, 助手
Review Section/Research Field
Principal Investigator
Materials/Mechanics of materials / Materials/Mechanics of materials
Except Principal Investigator
Materials/Mechanics of materials / Materials/Mechanics of materials / 材料力学
Keywords
Principal Investigator
マグネシウム合金 / 軽合金 / 表面改質処理 / 超高サイクル疲労 / 介在物 / モンテカルロシミュレーション / 高強度鋼 / 極値統計
Except Principal Investigator
Recovery Strain Energy / Fatigue Life … More / 散逸ひずみエネルギ / 回復ひずみエネルギ / 疲労寿命 / TiNiCu形状記憶合金 / 疲労強度信頼性向上 / ステンレス鋼 / アルミニウム合金 / 圧縮残留応力 / 疲労き裂進展抑制 / 疲労き裂進展 / Strain hardeing layer / Compressive residual stress / Crack profile obserbation / Micro computed tomography (μCT) / Machine and structural materials / Fatgiue crack propagation control / Fatigue strength reliability / Laser peening treatment / 応力拡大係数 / 疲労強度信頼性 / 機械構造部材 / 疲労き製造展抑制 / レーザビーニング処理 / 加工硬化層 / き裂形状観察 / μCT技術 / 機械・構造部材 / レーザピーニング処理 / Disperte Strain Energy / Recovery Stress / Cold-Working Ratio / Transformation Temperature / Thermo-Mechanical Cycles / TiNiCu Type Shape Memory Alloy / 高強度長寿命化 / 非回復ひずみ / 最大ひずみ量 / 加熱温度 / 熱機械繰返し特性 / TiNiCu系形状記憶合金 / 有効ひずみエネルギ / 熱・機械繰返し特性 / 低熱源発電システム / Ti-Ni-Cu形状記憶合金 / 回復応力 / 冷間加工率 / 変態温度 / 熱・機械繰返し / Super Elasticity Cycles / Dispersion Strain Energy / Cu Content / Martensitic Transformation / Thermo-Mechnaical Cycle / TiNiCu Group Shape Memory Alloy / 大容量・低熱源発電システム / エネルギー変換素子 / 散逸エネルギー / 散逸ひずみエネルギー / 回復ひずみエネルギー / 熱・機械サイクル / 超弾性サイクル / Cu濃度 / マルテンサイト変態 / 熱・機械的サイクル / Fracture Strength / Indentation / Small Spherical Indenter / Thin Film / 破壊強度 / 押し込み / 微小球圧子 / 薄膜 / Reliability Engineering / Strength Confirmation Test / Silicon Nitride / Ceramics Bearing / Ceramics / 窒化珪素 / セラミック軸受 / 信頼性工学 / 強度確認試験 / 窒化硅素 / セラミックス軸受 / セラミックス / 表面改質処理 / ひずみ硬化 / 軽量化 / チタニウム合金 / オーステナイト系ステンレス鋼 / チタン合金 / 疲労強度安全性向上 / 疲労き裂発生 / 疲労強度安全性 / 航空機部材 / レーザーピーニング処理 Less
  • Research Projects

    (8 results)
  • Research Products

    (65 results)
  • Co-Researchers

    (7 People)
  •  Fatigue Strength Characteristics Improvement and Weight Reduction of Structural Material for Automobile by Surface Reforming TreatmentPrincipal Investigator

    • Principal Investigator
      MATSUMURA TAKASHI
    • Project Period (FY)
      2012 – 2015
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      The University of Electro-Communications
  •  Study of improvement of fatigue strength safety and weight reduction by laser peening treatment in aircraft component materials

    • Principal Investigator
      OCHI Yasuo
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      The University of Electro-Communications
  •  Study on Improvement of Fatigue Strength Reliability in Machine and Structure by Laser Peening Treatment

    • Principal Investigator
      OCHI Yasuo
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      The University of Electro-Communications
  •  Basic Study of Electric Generation with Low Temperature Heat Source by Shape Memory Alloy(Thrmo-Mechanical Cyclic Properties and Lengthening of Fatigue Life)

    • Principal Investigator
      OCHI Yasuo
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      University of Electro-Communications
  •  Evaluation of Thermo-Mechanical Cyclic Properties of Shape Memory Alloy Aiming to Electric Generation System with Mass and Low Temperature Heat Source.

    • Principal Investigator
      OCHI Yasuo
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      University of Electro-Communications
  •  極値統計による最大介在物寸法の推定における抽出面積と分割数の決定方法Principal Investigator

    • Principal Investigator
      松村 隆
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      The University of Electro-Communications
  •  A Study on Method for Evaluating Fracture Strength of Brittle Thin Films Using a Small Spherical Indentation

    • Principal Investigator
      TAKAMATSU Tohru, 市川 昌弘
    • Project Period (FY)
      1993 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      The University of Electro-Communications
  •  Development of Strength Confirmation Testing Method of Ceramics by Reliability Engineering

    • Principal Investigator
      ICHIKAWA Masahiro
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      材料力学
    • Research Institution
      The University of Electro-Communications

All 2016 2015 2013 2012 2011 2010 2009 2008 2007 2006 Other

All Journal Article Presentation

  • [Journal Article] 鍛造アルミニウム合金の高サイクル疲労特性における異方性とレーザピーニング処理の影響2011

    • Author(s)
      越智保雄, 松村隆, 鈴木佑司, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Journal Title

      材料試験技術

      Volume: 56 Pages: 3-10

    • NAID

      40018829169

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] 鍛造アルミニウム合金の高サイクル疲労特性における異方性とレーザピーニング処理の影響2011

    • Author(s)
      越智保雄, 松村隆, 鈴木佑司, 政木清孝, 柿内利文, 佐野雄二, 足立利文
    • Journal Title

      材料試験技術 第56巻

      Pages: 3-10

    • NAID

      40018829169

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Effects of Laser Peening Treatment without Protective Coating on Axial Fatigue Property of Aluminum Alloy2010

    • Author(s)
      越智保雄, 松村隆, 五十嵐崇亮, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Journal Title

      Procedia Engineering Vol.2

      Pages: 491-498

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Al合金の軸荷重下における高サイクル疲労強度および疲労き裂進展特性に及ぼすレーザピーニング処理の影響2010

    • Author(s)
      越智保雄, 松村隆, 五十嵐崇亮, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Journal Title

      材料 第59巻

      Pages: 932-937

    • NAID

      130000435248

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Effects of Laser Peening Treatment on High Cycle Fatigue and Crack Propagation Behaviors in Austenitic Stainless Teel2010

    • Author(s)
      K.Masaki, Y.Ochi, T.Matsumura, T.Ikarashi, Y.Sano
    • Journal Title

      Journal of Power and Energy Systems, JSME 4

      Pages: 94-104

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Al合金の軸荷重下における高サイクル疲労強度および疲労き裂進展特性に及ぼすレーザピーニング処理の影響2010

    • Author(s)
      越智保雄, 松村隆, 五十嵐崇亮, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Journal Title

      材料

      Volume: 59 Pages: 932-937

    • NAID

      130000435248

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Effects of Laser Peening Treatment without Protective Coating on Axial Fatigue Property of Aluminum Alloy2010

    • Author(s)
      Y.O chi, T.Matsumura, T.Ikarashi, K.Masaki, T.Kakiuch i, Y.Sano, T.Adachi
    • Journal Title

      Procedia Engineering

      Volume: 4 Pages: 491-498

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Effects of Laser Peening Treatment on High Cycle Fatigue and Crack Propagation Behaviors in Austenitic Stainless Steel2010

    • Author(s)
      政木清孝, 越智保雄, 松村隆, 五十嵐崇亮, 佐野雄二
    • Journal Title

      J.of Power and Energy Systems, JSME Vol.4

      Pages: 94-104

    • NAID

      130000253463

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Effects of Laser Peening Treatment on High Cycle Fatigue and Crack Prtopagation Behaviors in Austenitic Stainless Steel2010

    • Author(s)
      K.Masaki, Y.Ochi, T.Matsumura, T.Ikarashi, Y.Sano
    • Journal Title

      J.of Power and Energy Systems

      Volume: 4 Pages: 94-104

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] Effets of Laser Peening Treatment on High Cycle Fatigue Property of Aluminum Alloys2008

    • Author(s)
      Y. Ochi, K, Masaki, T. Matsumura, T. Kakiuchi, Y. Suzuki, Y. Sano, T. Adachi
    • Journal Title

      CD-ROM of MS&T (Materials Science & Technology) Conference 2008. 1

      Pages: 1-13

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Journal Article] レーザピーニングによるAC4CHアルミニウム合金の疲労き裂進展抑制2007

    • Author(s)
      政木清孝, 越智保雄, 松村隆, 佐野雄二, 秋田貢一, 梶原堅太郎
    • Journal Title

      材料 56-12

      Pages: 1133-1138

    • NAID

      130002085919

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Efeects of Laser Peening on Fatigue Crack Behaviors in Pre-Cracked Cast Aluminum Alloy2007

    • Author(s)
      Y. Ochi, K. Masaki, T. Matsumura, Y. Sano, K. Akita, K. Kajiwara
    • Journal Title

      Key Engineering Materials 345/346

      Pages: 255-258

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Effects of Laser Peening on Fatigue Crack behaviors in Pre-Cracked casrt Aluminum Alloy2007

    • Author(s)
      Y. Ochi, K. Masaki, T. Matsumura, Y. Sano, K. Akita, K. Kajiwara
    • Journal Title

      Key Engineering materisls 345-346

      Pages: 255-258

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Effects of Laser Treatment on High Cycle fatigue Properties of degassing Processed Cast Aluminum Alloy2007

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, Y. Sano
    • Journal Title

      Materials Science and Engineering A 468/470

      Pages: 171-175

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Effects of Laser Peening on Fatigue Crack Bohaviors in Pre-Cracked Cast Aluminum Alloy2007

    • Author(s)
      Y. Ochi, K. Masaki, T. Matsumura, Y. Sano, K. Akita and K. Kajiwara
    • Journal Title

      Key Engineering Msterials 345-346

      Pages: 255-268

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Effects of Laser Peening Treatment on High Cycle Fatgiue Properties of Degassing-Processed Cast Aluminum Alloy2007

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, Y. Sano
    • Journal Title

      Materials Science and Engineering A 468-470

      Pages: 171-175

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Retardation of Fatigue Crack Growth on AC4Ch Cast Aluminum Alloy by Laser Peening2007

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, Y. Sano, K. Akita, K. Kajiwara
    • Journal Title

      J. of the Soc. Of Materials Science, Japan 56

      Pages: 1133-1138

    • NAID

      130002085919

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Effects of Laser Peening Treatment on High Cycle fatigue Properties of Degassing-Processed Cast Aluminum Alloy2007

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, And Y. Sano
    • Journal Title

      Materials Science and Engineering A 468-470

      Pages: 171-175

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] レーザビーニングによるAC4CHアルミニウム合金の疲労き裂進展抑制2007

    • Author(s)
      政木清孝、越智保雄、松村隆、佐野雄二、秋田貫一、梶原堅太郎
    • Journal Title

      材料(日本材料学会誌) 56

      Pages: 1133-1138

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] 溶湯処理鍛造アルミニウム合金の疲労特性に及ぼすレーザピーニング処理の影響2006

    • Author(s)
      政木清孝, 越智保雄, 熊谷洋平, 松村隆, 佐野雄二, 内藤英樹
    • Journal Title

      材料 55

      Pages: 706-711

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Fatigue Strength Improvement in Degassing Processed Cast Aluminum Alloy2006

    • Author(s)
      Y. Ochi, K. Masaki, T. Matsumura, Y. Kumagai, T. Hamaguchi, Y. Sano
    • Journal Title

      Inter. J. of Modern Physics B 20

      Pages: 3593-3598

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] 溶湯処理鋳造アルミニウム合金の疲労特性に及ぼすレーザピーニングの影響2006

    • Author(s)
      政木清孝, 越智保雄, 熊谷洋平, 松村隆, 佐野雄二, 内藤英樹
    • Journal Title

      材料 55・7

      Pages: 706-711

    • NAID

      110006570987

    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Influence of Laser Peening Treatment on High-Cycle Fatigue Properties of Degassing Processed AC4CH Aluminum Alloy2006

    • Author(s)
      K. Masaki, Y. Ochi, Y. Kumagai, T. Matsumura, Y. Sano
    • Journal Title

      J. of the Society of Materials Science, Japan 55

      Pages: 706-711

    • NAID

      110006570987

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Fatigue Strength Improvement by peening Treatment in Degassing Processed Cast Aluminum Alloys2006

    • Author(s)
      Y.Ochi, K.Masaki, T.Matsumura, Y.Kumagai, T.Hamaguchi, Y.Sano
    • Journal Title

      International Journal of Modern Physics B 20・25,26,27

      Pages: 3593-3598

    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Fatigue Strength Improvement in Degassing Processed Cast Aluminum Alloy2006

    • Author(s)
      Y. Ochi, K. Masaki, T. Matsumura, Y. Kumagai, T .Hamaguchi, Y. Sano
    • Journal Title

      Inter. J. of Modern Physics B 20

      Pages: 25-30

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Journal Article] Al合金の軸荷重疲労特性に及ぼすレーザピーニング処理の影響

    • Author(s)
      五十嵐崇亮, 薗部祐介, 越智保雄, 松村隆, 佐野雄二, 足立隆史
    • Journal Title

      日本材料学会第58期総会講演会

    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 鋳造アルミニウム合金の疲労強度特性に及ぼす二段多重変動荷重の影響2016

    • Author(s)
      土屋大輔,齋藤 雄介,松村 隆
    • Organizer
      日本機械学会2016年度年次大会
    • Place of Presentation
      九州大学大学院工学研究院
    • Year and Date
      2016-09-12
    • Data Source
      KAKENHI-PROJECT-24560090
  • [Presentation] マグネシウム合金極細線の疲労強度特性に関する研究2015

    • Author(s)
      保科直義,高階薫,松村隆
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学工学部
    • Year and Date
      2015-09-14
    • Data Source
      KAKENHI-PROJECT-24560090
  • [Presentation] 鋳造アルミニウム合金の疲労強度特性に関する研究2015

    • Author(s)
      松井翔,齋藤雄介,松村隆
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学工学部
    • Year and Date
      2015-09-14
    • Data Source
      KAKENHI-PROJECT-24560090
  • [Presentation] 極細線の静的強度特性および疲労強度特性に及ぼす経時の影響2013

    • Author(s)
      松村 隆
    • Organizer
      日本材料学会信頼性・破壊力学合同シンポジウム
    • Place of Presentation
      阿蘇ファームランド
    • Data Source
      KAKENHI-PROJECT-24560090
  • [Presentation] AL合金の軸荷重下における高サイクル疲労特性に及ぼす二段多重変動荷重の影響2012

    • Author(s)
      松村 隆
    • Organizer
      日本機械学会M&M2012材料力学カンファレンス
    • Place of Presentation
      愛媛大学
    • Data Source
      KAKENHI-PROJECT-24560090
  • [Presentation] 鍛造アルミニウム合金の高サイクル疲労特性における異方性とレーザピーニング処理の影響2011

    • Author(s)
      越智保雄, 松村隆, 鈴木佑司, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      第246回材料試験技術シンポジウム
    • Place of Presentation
      東京
    • Year and Date
      2011-01-25
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 鍛造アルミニウム合金の高サイクル疲労特性における異方性とレーザピーニング処理の影響2011

    • Author(s)
      越智保雄, 松村隆, 鈴木佑司, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      第246回材料試験技術シンポジウム
    • Place of Presentation
      工学院大学(東京都)
    • Year and Date
      2011-01-25
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] チタン合金Ti-6Al-4Vの回転曲げ疲労特性に及ぼすレーザピンニング処理の影響2010

    • Author(s)
      佐々木龍介, 松村隆, 越智保雄, 政木清孝, 酒井達雄, 佐野雄二
    • Organizer
      日本材料学会第59期総会講演会
    • Place of Presentation
      北海道大学(札幌市)
    • Year and Date
      2010-05-23
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] チタン合金Ti-6Al-4Vの回転曲げ疲労特性に及ぼすレーザピーニング処理の影響2010

    • Author(s)
      佐々木龍介, 松村隆, 越智保雄, 政木清孝, 酒井達雄, 佐野雄二
    • Organizer
      日本材料学会第59期総会講演会
    • Place of Presentation
      札幌
    • Year and Date
      2010-05-23
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 鍛造アルミニウム合金の高サイクル疲労特性における異方性とレーザピーニング処理効果2010

    • Author(s)
      越智保雄, 松村隆, 鈴木佑司, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      第30回疲労シンポジウム(日本材料学会主催)
    • Place of Presentation
      高知城ホール(高知市)
    • Year and Date
      2010-10-29
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Effects of Laser Peening Treatment without Protective Coating on Axial Fatigue property of Aluminum Alloy2010

    • Author(s)
      Y.Ochi, T.Matsumura, T.Ikarashi, K.Masaki, T.Kakiuchi, Y.Sano, T.Adachi
    • Organizer
      Proceedings of 10th Inter.Conf.on Fatigue (IFC10, Fatigue2010)
    • Place of Presentation
      プラハコンベンションセンター(プラハ市, チェコ共和国)(CD-ROM)
    • Year and Date
      2010-06-10
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Al合金の軸荷重疲労試験における表面き裂挙動に及ぼすレーザピーニング処理の影響2009

    • Author(s)
      越智保雄, 五十嵐崇亮, 薗部祐介, 松村隆, 柿内利文, 政木清孝, 佐野雄二, 足立隆史
    • Organizer
      日本機械学会M&M 2009カンファレンス
    • Place of Presentation
      札幌コンベンションセンター (北海道札幌市)
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] effects of Laser Peening Treatment on High Cycle Fatigue and Crack Propagation Behaviors in Austenitic Stainless Steel2009

    • Author(s)
      越智保雄, 政木清孝, 松村隆, 五十嵐崇亮, 佐野雄二
    • Organizer
      The 17^<th> Inter. Conf. on Nuclear Enging (ICONE17)
    • Place of Presentation
      Brussels
    • Year and Date
      2009-07-12
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Effects of Laser Peening Treatment on High Cycle Fatigue and Crack Propagation Behaviors in Austenitic Stainless Steel2009

    • Author(s)
      Y.Ochi, K.Masaki, T.Matsumura, T.Ikarashi, Y.Sano
    • Organizer
      The 17^<th> Inter. Conf. on Nuclear Engng., (ICONE17)
    • Place of Presentation
      Brussels (Belgium)
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Al合金の軸荷重疲労特性に及ぼすレーザピーニング処理の影響2009

    • Author(s)
      五十嵐崇亮, 薗部祐介, 越智保雄, 松村隆, 佐野雄二, 足立隆史
    • Organizer
      日本材料学会第58期総会講演会
    • Place of Presentation
      愛媛大学 (愛媛県松山市)
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Al合金の軸荷重下における高サイクル疲労強度及び疲労き裂進展特性に及ぼすLP処理の影響2009

    • Author(s)
      越智保雄, 五十嵐崇亮, 薗部祐介, 松村隆, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      日本材料学会第14回破壊力学シンポジウム
    • Place of Presentation
      大濱記念会館 (沖縄県石垣市)
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Laser and Shot Peening Effects on High Cycle Fatigue Property in Austenitic Stainless Steel2009

    • Author(s)
      越智保雄, 政木清孝, 松村隆, 佐野雄二
    • Organizer
      The 7^<th> EEUROMECH Solid Mechanics Conference(ESMC2009)
    • Place of Presentation
      Lisbon
    • Year and Date
      2009-09-07
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 日本機械学会M&M2009カンファレンス2009

    • Author(s)
      柿内利文, 鈴木佑司, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Place of Presentation
      札幌
    • Year and Date
      2009-07-24
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Al合金の軸荷重下における高サイクル疲労強度及び疲労き裂進展特性に及ぼすLP処理の影響2009

    • Author(s)
      越智保雄, 五十嵐崇亮, 薗部祐介, 松村隆, 政木清孝, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      日本材料学会第14回破壊力学シンポジウム
    • Place of Presentation
      沖縄
    • Year and Date
      2009-10-23
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] Laser, Shot Peening Effect on High Cycle Fatigue Property in Austenitic Stainless Steel2009

    • Author(s)
      Y.Ochi, K.Masaki, T.Matsumura, Y.Sano
    • Organizer
      The 7^<th> EUROMECH Solid Mechanics Conf. (ESMC2009)
    • Place of Presentation
      Lisbon (Portugal)
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] アルミニウム合金の回転曲げ疲労特性に及ぼすレーザピーニング処理の影響2009

    • Author(s)
      柿内利文, 鈴木, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Organizer
      日本機械学会M&M 2009カンファレンス
    • Place of Presentation
      札幌コンベンションセンター (北海道札幌市)
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 航空機用アルミニウム合金の高サイクル疲労特性に及ぼすLP処理の影響2008

    • Author(s)
      鈴木佑司, 政木清孝, 越智保雄, 松村隆, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      日本材料学会第29回疲労シンポジウム講演論文集
    • Place of Presentation
      京大会館、京都
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] SUS316L鋼の高サイクル疲労および疲労き裂進展特性に及ぼすレーザピーニング処理の影響2008

    • Author(s)
      五十嵐崇亮, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Organizer
      日本材料学会第29回疲労シンポジウム講演論文集
    • Place of Presentation
      京大会館、京都
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 航空機用展伸アルミニウム合金の軸疲労特性に及ぼすレーザピーニング処理の影響2008

    • Author(s)
      五十嵐崇亮, 松村隆, 越智保雄, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      日本材料学会第57期総会講演会
    • Place of Presentation
      鹿児島
    • Year and Date
      2008-05-24
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] 航空機用展伸アルミニウム合金の軸疲労特性に及ぼすレーザピーニングの影響2008

    • Author(s)
      五十嵐崇亮, 松村隆, 越智保雄, 柿内利文, 佐野雄二, 足立隆史
    • Organizer
      日本材料学会第57期総会講演会
    • Place of Presentation
      鹿児島大、鹿児島
    • Year and Date
      2008-05-24
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] レーザピーニング処理によるアルミニウム合金の高サイクル疲労強度信頼性向上2008

    • Author(s)
      鈴木佑司, 越智保雄, 松村隆, 柿内利文, 政木清孝, 佐野雄二, 足立隆史
    • Organizer
      日本機械学会M&M2008カンファレンス
    • Place of Presentation
      立命館大, 滋賀
    • Data Source
      KAKENHI-PROJECT-20560068
  • [Presentation] SUS316L予き裂材の疲労き裂進展特性に対するレーザピーニング処理効果2007

    • Author(s)
      五十嵐崇亮, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Organizer
      日本機械学会2007年度年次大会
    • Place of Presentation
      関西大学(大阪府)
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] 疲労予き裂材へのレーザピーニング効果2007

    • Author(s)
      五十嵐崇亮, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Organizer
      日本機械学会M&M2007材料力学カンファレンス
    • Place of Presentation
      東京大学生産技術研究所(東京都)
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] 航空機用展進アルミニウム合金の疲労特性に及ぼすLP処理の影響2007

    • Author(s)
      鈴木祐司, 蘇亜拉図, 黒川武弘, 越智保雄, 政木清孝, 松村隆, 佐野雄二, 足立隆史
    • Organizer
      日本機械学会M&M2007材料力学カンファレンス
    • Place of Presentation
      東京
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] 航空機用展伸アルミニウム合金の疲労特性に及ぼすLP処理の影響2007

    • Author(s)
      鈴木佑司, 蘇亜拉図, 黒川武弘, 越智保雄, 政木清孝, 松村隆, 佐野雄二, 足立隆史
    • Organizer
      日本機械学会M&M2007材料力学カンファレンス
    • Place of Presentation
      東京大学生産技術研究所(東京都)
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] Retardati on of Fatgiue Crack Growth on AC4CH Cast Aluminum Alloy by Laser Peening2007

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, Y. Sano
    • Organizer
      Inter. Sym. on Advanced Technology in Experimental Mechanics 2007(ATEM'07)
    • Place of Presentation
      Fukuoka, Japan
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] Effect of Laser Peening Treatment in Pre-crackd Specimens2007

    • Author(s)
      T. Ikarashi, K. Masaki, Y. Ochi, T. Matsumura, Y. Sano
    • Organizer
      M&M Conf.,JSME
    • Place of Presentation
      Tokyo Japan
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] SUS316L 予き裂材の疲労き裂進展特性に対するレーザピーニング処理効果2007

    • Author(s)
      五十嵐崇亮, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Organizer
      日本機械学会2007年度年次大会講演会
    • Place of Presentation
      大阪
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] Effect of Laser Peening Treatment on Fatigue Crack Propagati on Property In Pre-cracked SUS316L2007

    • Author(s)
      T. Ikarashi, K. Masaki, Y. Ochi, T . Matsumura, Y. Sano
    • Organizer
      Annual Meeting of JSME
    • Place of Presentation
      Osaka, Japan
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] Retardation of Fatgiue Crack Growth on AC4CH Cast Aluminum Alloy by Laser Peening2007

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, Y. Sano
    • Organizer
      Inter. Symp. On Advanced Technology on Expperimental Mechanics 2007(ATEM'07), JSME-MMD
    • Place of Presentation
      Fukuoka, Japan
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] 疲労予き裂材へのレーザーピーニング効果2007

    • Author(s)
      五十嵐崇亮, 政木清孝, 越智保雄, 松村隆, 佐野雄二
    • Organizer
      日本機械学会M&M2007材料力学カンファレンス
    • Place of Presentation
      東京
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] AC4CH予き裂材の疲労特性に対するレーザピーニング処理の効果2006

    • Author(s)
      政木清孝, 越智保雄, 松村隆, 佐野雄二, 秋田貢一, 梶原堅太郎
    • Organizer
      日本機械学会2006年度年次大会
    • Place of Presentation
      熊本大学(熊本県)
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] Effect of Laser Peening Treatment on Fatigue Property in Pre-cracked AC4CH2006

    • Author(s)
      K. Masaki, Y. Ochi, T. Matsumura, Y. Sano, K. Akita, K. Kajiwara
    • Organizer
      Annual Meeting of JSME
    • Place of Presentation
      Kumamoto, Japan
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560073
  • [Presentation] 鋳造アルミニウム合金の疲労特性と疲労き裂発生寿命に関する研究

    • Author(s)
      松村隆,齋藤雄介,山田浩二,越智保雄
    • Organizer
      日本材料学会第32回疲労シンポジウム
    • Place of Presentation
      高山市民文化会館
    • Year and Date
      2014-11-06 – 2014-11-08
    • Data Source
      KAKENHI-PROJECT-24560090
  • 1.  OCHI Yasuo (70017416)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 58 results
  • 2.  KAKIUCHI Tishifumi (20452039)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 19 results
  • 3.  TAKAMATSU Tohru (00106890)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 4.  ICHIKAWA Masahiro (80017334)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  ZHU Shijie (60283032)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 6.  MASAKI Kiyotaka (30323885)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 27 results
  • 7.  OKABE Nagatoshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi