MORIKAWA Tatsuya 森川龍哉

… Alternative Names

森川龍也モリカワタツヤ

Less

Researcher Number	00274506
Affiliation (Current)	2025: 九州大学, 工学研究院, 助教
Affiliation (based on the past Project Information) *help	2015 – 2024: 九州大学, 工学研究院, 助教 2015: 九州大学, 大学院工学研究院, 助教 2015: 九州大学, 大学院工学研究院材料工学部門, 助教 2012 – 2015: 九州大学, 工学(系)研究科(研究院), 助教 2012: 九州大学, 工学研究院, 材料工学部門 … More 2010 – 2011: 九州大学, 大学院・工学研究院, 助教 2010 – 2011: 九州大学, 工学研究院, 助教 2007 – 2008: 九州大学, 大学院・工学研究院, 助教 2006: 九州大学, 大学院工学研究院, 助手 2003 – 2005: 九州大学, 大学院・工学研究院, 助手 2000 – 2003: 九州大学, 工学研究院, 助手 2000: Kyushu Univ.Dept.Mater.Sci.Eng., Research Associate, 大学院・工学研究院, 助手 1999: 九州大学, 大学院・工学研究科, 助手 1999: Kyushu Univ. Dept. Mater. Sci. Eng., Associate Professor, 工学研究科, 助手 1996 – 1998: 九州大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Structural/Functional materials / Structural/Functional materials / Basic Section 26050:Material processing and microstructure control-related / Basic Section 26040:Structural materials and functional materials-related Except Principal Investigator Physical properties of metals / Structural/Functional materials / Basic Section 26040:Structural materials and functional materials-related / Physical properties of metals / Science and Engineering
Keywords	Principal Investigator 結晶性材料 / 相当塑性ひずみ / 塑性変形 / 集合組織 / 力学物性 / 構造材料 / 加工硬化 / 破壊 / 転位 / クラック … More / 集束イオンビーム法 / 電子線後方反射回折法 / ひずみ分布解析 / 結晶方位分布 / 圧延 / 不均一変形 / 再結晶 / マテリアルインフォマティックス / 力学的応答 / 局所ひずみ分布 / 構造用金属材料 / 変形微視組織 / 転位論 / 自動車用薄鋼板 / 走査電子顕微鏡 / 電子線リソグラフィ / 透光性結晶 / 応力拡大係数 / 塩化ナトリウム / 格子欠陥 / 透過電子顕微鏡 / 光弾性 / 応力場 / 結晶粒界 … More Except Principal Investigator 転位 / 破壊 / クラック / dislocation / crack / 力学特性 / 電子顕微鏡 / 格子欠陥 / 応力遮蔽 / 構造・機能材料 / 亀裂 / 結晶塑性 / 超高圧電子顕微鏡 / 曲げ試験 / 強度 / 変形 / 加工硬化 / Hall-Petch / fracture toughness / semiconductor / materials fracture / brittle-to-ductile transition / 破壊靱性 / 半導体 / 材料破壊 / 脆性-延性遷移 / シリコン / すべり変形 / 変形帯 / 靭性 / 透過電子顕微鏡 / 破壊靭性 / 応力遮蔽効果 / 力学試験 / 塑性変形 / 超高圧電子顕微鏡法 / electron microscopy / crack-tip shielding / 赤外光弾性 / mechanical property / dislocation density / mechanical milling / ultrafine Brained steel / 粒界すべり / 微細粒 / Bailey-Hirchの関係 / Hall-Petch則 / 熱間押出 / 機械的性質 / 転位密度 / メカニカルミリング / 超細粒 / transmission electron microscopy / stress shielding effect / deformation microstructure / stainless steal / Fe-3 % Si / cold-rolling / inhomogenious deformation / shear bands / deformation bands / Fe-Si合金 / 不均質 / 変形微視組織 / ステンレス鋼 / Fe-3%Si / 圧延加工 / 不均質変形 / 剪断帯 / silicon / infrared / photoelasticity / lattice defect / 赤外線 / 光弾性 / HVEM / fracture / Shielding / Dislocation / Ionic crystal / Grain boundary / Crack / Fracture / 応力遮蔽(しゃへい) / イオン結晶 / 粒界 / 構造材料 / 強度・破壊靭性 / 機能・構造材料 / 変形機構 / 力学的特性 / キンク変形帯 / 高温強度 / キンク / 塑性変形機構 / トモグラフィ / 物性実験 / 走査透過電子顕微鏡 / 電子線トモグラフィ Less

Recrystallization Nucleation Mechanism Based on a New Sequential Observation Method for Inhomogeneously Deformed Microstructures in Cold-rolled SteelPrincipal Investigator
- Principal Investigator
  
  森川龍哉
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Kyushu University
Measurement of dislocation-dislocation interaction using microcantilever tests
- Principal Investigator
  
  田中將己
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Kyushu University
Temperature dependence of critical resolved shear stress using without making large single crystalline specimens
- Principal Investigator
  
  Tanaka Masaki
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Kyushu University
Establishment of Numerical Method of Local Plastic Strain by Nanoscale MarkingPrincipal Investigator
- Principal Investigator
  
  Morikawa Tatsuya
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Kyushu University
The establishment of a estimating method of plastic strain distribution due to construction of multi-scale markingPrincipal Investigator
- Principal Investigator
  
  Morikawa Tatsuya
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Multiplication process of dislocations at a crack tip revealed by using HVEM tomography.
- Principal Investigator
  
  Tanaka Masaki
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Study on fracture toughness unifying nanomaterials science and micro fracture mechanics.
- Principal Investigator
  
  Higashida Kenji
- Project Period (FY)
  2014 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Sasebo National College of Technology
  Kyushu University
Brittle-to-ductile transition in fcc alloys and its mechanism.
- Principal Investigator
  
  Tanaka Masaki
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Comparison and elucidation of the synchronous/non-synchronous type LPSO structures in the deformation mechanism and the principle of strengthening by observation and measurement
- Principal Investigator
  
  Higashida Kenji
- Project Period (FY)
  2011 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Kyushu University
Structure analysis of lattice defects in near bulk specimens combining high-voltage electron microscopy and electron energy loss spectroscopy.
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  2010 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Analysis of Plastic Strain Distribution Using High-Precision Grid-Markers Drawn by Electron Beam LithographyPrincipal Investigator
- Principal Investigator
  
  MORIKAWA Tatsuya
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
3-D analyses for crack tip dislocations by using electron tomography
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Physical properties of metals
- Research Institution
  Kyushu University
Mesoscopic-scale dynamics of materials fracture and workability of silicon crystals
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Physical properties of metals
- Research Institution
  KYUSHU UNIVERSITY
Property Evaluation and Application of Ultrafine Grained Steel
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  KYUSHU UNIVERSITY
Microstructure of Crack Tip Plastic Zone and Fracture Toughness In Silicon Crystals
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Kyushu University
TEM analysis for meso-scale textures developed in heavily deformed Fe-alloys
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Kyushu University
Development of in-sutu observation system for internal stress fields due to lattice defects using the infrared photoelastic method
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  Physical properties of metals
- Research Institution
  KYUSHU UNIVERSITY
Study on the dislocation emission around a crack tip by using high-voltage electron microscopy
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  KYUSHU UNIVERSITY
光散乱法を用いた透光性結晶のクラック先端近傍転位の観察Principal Investigator
- Principal Investigator
  
  森川龍哉
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
赤外線光弾性法を用いたシリコン結晶中のクラック先端局部応力場の可視化Principal Investigator
- Principal Investigator
  
  森川龍哉
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Visualization of crack-grain boundary interaction in transparent crystals
- Principal Investigator
  
  HIGASHIDA Kenji
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  KYUSHU UNIVERSITY

[Book] マテリアルズ・インフォマティクス開発事例最前線2021
- Author(s)
  伊藤聡，田村亮，津田宏治，犬丸啓，森川龍哉，田中將己，松本要
- Total Pages
  277
- Publisher
  エヌ・ティー・エス
- Data Source
  KAKENHI-PROJECT-18K04751
[Journal Article] Temperature Independences of Fatigue Crack Growth in Ti–0.49 mass%O2022
- Author(s)
  Y. Okuyama, M. Tanaka and T. Morikawa
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 63 Issue: 4 Pages: 600-606
- DOI
  10.2320/matertrans.MT-M2021211
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2022-04-01
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02462, KAKENHI-PLANNED-18H05451
[Journal Article] Analysis of Work Hardening Behavior in Ferrite-Martensite Dual-phase Steels Using Micro-grid Method2021
- Author(s)
  Morikawa Tatsuya、Yoshioka Shimpei、Tanaka Masaki、Toji Yuki、Hasegawa Kohei
- Journal Title
  
  ISIJ International
  
  Volume: 61 Issue: 2 Pages: 625-631
- DOI
  10.2355/isijinternational.ISIJINT-2020-616
- NAID
  130007987404
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2021-02-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K04751, KAKENHI-PLANNED-18H05451
[Journal Article] Observation of Inhomogeneous Deformation in a Cold-Rolled Ti-added Ultra-Low Carbon Steel using High-Precision Markers Drawn by Focused Ion Beam2021
- Author(s)
  T Morikawa, R Kurosaka, M Tanaka, T Ichie and K Murakami
- Journal Title
  
  IOP Conf. Series: Materials Science and Engineering
  
  Volume: 1121 Issue: 1 Pages: 1-5
- DOI
  10.1088/1757-899x/1121/1/012008
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K04751
[Journal Article] Effects of Temperature and Stress Ratio on Stage II Fatigue Crack Propagation in Bimodal Ti–6Al–4V2021
- Author(s)
  Anne Bhargavi Rani、Tanaka Masaki、Yamasaki Shigeto、Morikawa Tatsuya
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 62 Issue: 7 Pages: 968-974
- DOI
  10.2320/matertrans.MT-M2020399
- NAID
  130008056624
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2021-07-01
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PLANNED-18H05451, KAKENHI-PROJECT-19H02462
[Journal Article] Modelling and Crystal Plasticity Analysis for the Mechanical Response of Alloys with Non-uniformly Distributed Secondary Particles2020
- Author(s)
  Okuyama Yelm、Tanaka Masaki、Ohashi Tetsuya、Morikawa Tatsuya
- Journal Title
  
  ISIJ International
  
  Volume: 60 Issue: 8 Pages: 1819-1828
- DOI
  10.2355/isijinternational.ISIJINT-2019-754
- NAID
  130007888020
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2020-08-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K04751, KAKENHI-PLANNED-18H05451
[Journal Article] Activated slip systems in bimodal Ti-6Al-4V plastically deformed at low and moderately high temperatures2020
- Author(s)
  Anne Bhargavi Rani、Okuyama Yelm、Morikawa Tatsuya、Tanaka Masaki
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 798 Pages: 140211-140211
- DOI
  10.1016/j.msea.2020.140211
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-18H05451, KAKENHI-PROJECT-19H02462
[Journal Article] Modelling and Crystal Plasticity Analysis for the Mechanical Response of Alloys with Non-uniformly Distributed Secondary Particles2019
- Author(s)
  奥山彫夢，田中將己，大橋鉄也，森川龍哉
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 105 Issue: 2 Pages: 163-172
- DOI
  10.2355/tetsutohagane.TETSU-2018-098
- NAID
  130007585436
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H01333, KAKENHI-PROJECT-18H03848, KAKENHI-PROJECT-18K04751, KAKENHI-PLANNED-18H05451
[Journal Article] Temperature Dependence of Activation Enthalpy for Yielding in Bimodal Ti–6Al–4V2019
- Author(s)
  Bhargavi Rani Anne, Masaki Tanaka, Tatsuya Morikawa
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 60 Issue: 9 Pages: 1828-1832
- DOI
  10.2320/matertrans.ME201902
- NAID
  130007695356
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2019-07-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K04751, KAKENHI-ORGANIZER-18H05450, KAKENHI-PLANNED-18H05451
[Journal Article] Change in Slip Mode with Temperature in Ti–0.49 mass%O2019
- Author(s)
  Masaki Tanaka, Yukihiro Hayashi, Yelm Okuyama, Tatsuya Morikawa and Kenji Higashida
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 60 Issue: 1 Pages: 80-85
- DOI
  10.2320/matertrans.M2018251
- NAID
  130007550001
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2019-12-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K04751, KAKENHI-PLANNED-18H05451
[Journal Article] Mechanism Behind the Onset of Delamination in Wire-drawn Pearlitic Steels2019
- Author(s)
  田中將己，真鍋敏之，森川龍哉，東田賢二
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 105 Issue: 2 Pages: 155-162
- DOI
  10.2355/tetsutohagane.TETSU-2018-106
- NAID
  130007585428
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K04751, KAKENHI-PROJECT-18H03848, KAKENHI-PLANNED-18H05451
[Journal Article] Recrystallization Texture and Shear Band Formation in Bending2017
- Author(s)
  Hiroshi Kaneko, Tatsuya Morikawa, Masaki Tanaka, Hirofumi Inoue and Kenji Higashida
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 58 Issue: 2 Pages: 218-224
- DOI
  10.2320/matertrans.M2016363
- NAID
  130005297176
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K06489
[Journal Article] Evolution of Heterogeneous Deformation Microstructures during Cold Rolling of Poly-crystalline Ti-added Ultra Low Carbon Steel2017
- Author(s)
  Genki TSUKAMOTO，Tatsuya MORIKAWA，Kenji HIGASHIDA，Ken KIMURA，Kohsaku USHIODA
- Journal Title
  
  ISIJ International
  
  Volume: 57 Issue: 8 Pages: 1476-1483
- DOI
  10.2355/isijinternational.ISIJINT-2017-102
- NAID
  130005982786
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K06489
[Journal Article] シンクロ型LPSO構造の力学的性質とキンク変形挙動2016
- Author(s)
  萩原幸司，森川龍哉，東田賢二
- Journal Title
  
  金属
  
  Volume: 86 Pages: 472-479
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K06489
[Journal Article] Tensile Properties and Plastic Strain Distribution in a Metastable Cr-Mn-N Duplex Stainless Steel2016
- Author(s)
  藤澤光幸，間内良太，森川龍哉，田中將己，東田賢二
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 102 Issue: 7 Pages: 405-414
- DOI
  10.2355/tetsutohagane.TETSU-2015-099
- NAID
  130005159404
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K06489
[Journal Article] Microstructures of Long-Period Stacking Ordered Phase of Mg–Zn–Y Alloy2013
- Author(s)
  Hongye Gao, Ken-ichi Ikeda, Tatsuya Morikawa, Kenji Higashida and Hideharu Nakashima
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 5 Pages: 632-635
- DOI
  10.2320/matertrans.MI201219
- NAID
  10031168402
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-ORGANIZER-23109001, KAKENHI-PLANNED-23109008, KAKENHI-PLANNED-23109010
[Journal Article] Inhomogeneities of Deformation Microstructures in Metallic Materials2013
- Author(s)
  東田賢二，森川龍哉，Hongye Gao
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity
  
  Volume: 54 Issue: 633 Pages: 877-880
- DOI
  10.9773/sosei.54.877
- NAID
  10031197017
- ISSN
  0038-1586, 1882-0166
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-23109008
[Journal Article] Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy2010
- Author(s)
  Tatsuya Morikawa, et al.
- Journal Title
  
  Materials Transactions
  
  Volume: 51 Pages: 620-624
- NAID
  10026266516
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560701
[Journal Article] Inhomogeneous Deformation observed using High-Precision Markers Drawn by Electron Beam Lithography in a Magnesium Alloy with LPSO Phase2010
- Author(s)
  Tatsuya Morikawa, +2
- Journal Title
  
  Materials Science Forum
  
  Volume: 638-642 Pages: 1574-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560701
[Journal Article] 長周期積層構造相を含むマグネシウム合金押出材における不均一変形挙動2010
- Author(s)
  森川龍哉,他5名
- Journal Title
  
  熱処理
  
  Volume: 50 Pages: 200-204
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Ti添加極低酸素鋼の結晶粒界近傍における不均一変形2023
- Author(s)
  薮内翼，田中將己，森川龍哉，山﨑重人
- Organizer
  日本鉄鋼協会第186回秋季講演大会
- Data Source
  KAKENHI-PROJECT-23K04449
[Presentation] Ti添加極低炭素鋼の冷間圧延初期における結晶粒分割挙動とその機構2023
- Author(s)
  森川龍哉，山﨑重人，田中將己
- Organizer
  日本金属学会第2回結晶性材料の結晶配向評価および結晶方位解析技術研究会
- Data Source
  KAKENHI-PROJECT-23K04449
[Presentation] Observation of Inhomogeneous Deformation in a Cold-Rolled Ti-added Ultra-Low Carbon Steel using High-Precision Markers Drawn by Focused Ion Beam2021
- Author(s)
  T Morikawa, R Kurosaka, M Tanaka, T Ichie and K Murakami
- Organizer
  19th International Conference on Textures of Materials(ICOTOM19)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] Temperature dependence of fatigue crack propagation in Ti-6Al-4V at different stress ratios2020
- Author(s)
  B.R. Anne T. Morikawa M. Tanaka
- Organizer
  日本金属学会2020年秋季（第167回）講演大会
- Data Source
  KAKENHI-PROJECT-19H02462
[Presentation] 低炭素マルテンサイト-ベイナイト複合組織鋼の脆性-延性遷移挙動2020
- Author(s)
  坂巻巧，名古秀徳，難波茂信，森川龍哉，田中將己
- Organizer
  日本鉄鋼協会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 一軸引張における変形の不均一の現象論的モデルと応力ひずみ応答の予測2020
- Author(s)
  森川龍哉，田中將己
- Organizer
  日本鉄鋼協会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] bcc型ハイエントロピー合金(TiZrNbHfTa)における辷りの固執評価2020
- Author(s)
  岡丈慎治，森川龍哉，田中將己
- Organizer
  日本金属学会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 結晶塑性有限要素解析を用いたSi単結晶の加工硬化挙動解析2020
- Author(s)
  鈴木飛翔，奥山彫夢，森川龍哉，田中將己，藤瀬淳，小野敏昭
- Organizer
  日本金属学会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] マイクロカンチレバーを用いたFe-Si合金の塑性変形挙動解析2020
- Author(s)
  池上健太，田中將己，森川龍哉，奥山彫夢
- Organizer
  日本鉄鋼協会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] Ti添加極低炭素鋼における冷間圧延に伴う結晶粒分割追跡2020
- Author(s)
  赤井周平，森川龍哉，田中將己，市江毅，村上健一
- Organizer
  日本金属学会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 低炭素マルテンサイト鋼での塑性変形挙動に及ぼす低温焼戻し温度の影響2020
- Author(s)
  富山耕介，田中將己，森川龍哉
- Organizer
  日本鉄鋼協会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 負荷反転繰り返し変形させた複相鋼における不均一変形挙動2019
- Author(s)
  齊藤宏明，森川龍哉，田中將己，安田恭野，嶋村純二
- Organizer
  第61回日本顕微鏡学会九州支部学術講演会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 低温焼戻しラスマルテンサイト鋼における変形・破壊メカニズム2019
- Author(s)
  富山耕介，田中將己，森川龍哉
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 鉄系材料における冷間圧延に伴う優先結晶方位の発達と粒内ひずみ分布2019
- Author(s)
  森川龍哉，田中將己
- Organizer
  日本金属学会第3回金属・無機・有機材料の結晶方位解析と応用技術研究会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 単軸繰り返し変形させた複相鋼の不均一変形挙動2019
- Author(s)
  森川龍哉，田中將己，黒坂隆太，安田恭野，嶋村純二
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] Temperature dependence of activated slip systems in ti-6al-4v2019
- Author(s)
  B.R. Anne, Y. Okuyama, T. Morikawa and M. Tanaka
- Organizer
  日本金属学会2019年秋季（第165回）講演大会
- Data Source
  KAKENHI-PROJECT-19H02462
[Presentation] Deformation structures and recrystallization behavior in a cold-rolled bicrystal of Fe-Al alloy2019
- Author(s)
  Morikawa T., Tokunaga S., Tanaka M., Yoshie T., Murakami K.
- Organizer
  7th International Conference on Recrystallization and Grain Growth(ReX&GG)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] Temperature dependence of mechanical properties in bimodal ti-6al-4v2019
- Author(s)
  B.R. Anne, M. Tanaka and T. Morikawa
- Organizer
  令和元年度日本属学会九州支部・日本鉄鋼協会・軽金属学会九州支部合同学術講演大会
- Data Source
  KAKENHI-PROJECT-19H02462
[Presentation] 微細マーカー法によるFe-Ni合金のマルテンサイト変態に伴うひずみ分布解析2019
- Author(s)
  森川龍哉，田中將己
- Organizer
  日本機械学会M&M2019材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 冷延鋼板における局所ひずみ分布の微細マーカー法による直接観察2019
- Author(s)
  黒坂隆太，田中將己．森川龍哉
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 微細マーカー法によるFe-Ni合金のマルテンサイト変態に伴うひずみ分布の解析2018
- Author(s)
  森川龍哉，加藤遼馬，田中將己，東田賢二
- Organizer
  日本顕微鏡学会第74回学術講演会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 冷延したTi添加極低炭素鋼における局所ひずみ分布の微細マーカー法による直接観察2018
- Author(s)
  黒坂隆太，森川龍哉，田中將己
- Organizer
  日本鉄鋼協会第176回秋季講演大会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] BCC鉄系材料における優先結晶方位の発達と局所塑性ひずみ解析2018
- Author(s)
  森川龍哉，田中將己
- Organizer
  日本金属学会第2回金属・無機・有機材料の結晶方位解析と応用技術研究会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 冷延したTi添加極低炭素鋼における局所ひずみ分布の微細マーカー法による直接観察2018
- Author(s)
  黒坂隆太，森川龍哉，田中將己，市江毅，村上健一
- Organizer
  第60回日本顕微鏡学会九州支部学術講演会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] 冷延したTi添加極低炭素鋼における局所ひずみ分布の微細マーカー法による直接観察2018
- Author(s)
  黒坂隆太，森川龍哉，田中將己，市江毅，村上健一
- Organizer
  平成30年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] Fe-Ni合金のマルテンサイト変態に伴うひずみ分布解析2018
- Author(s)
  森川龍哉
- Organizer
  日本鉄鋼協会第2回オーステナイトを含む複相鋼における不均一変形フォーラム
- Data Source
  KAKENHI-PROJECT-18K04751
[Presentation] Fe-Ni合金のマルテンサイト変態で生じた局所ひずみ分布に及ぼす水素の影響2017
- Author(s)
  加藤遼馬, 中村直人, 森川龍哉, 田中將己, 東田賢二
- Organizer
  日本鉄鋼協会174回秋季講演大会北海度大学
- Data Source
  KAKENHI-PROJECT-26249106
[Presentation] Thermally activated process of dislocation gliding at low temperatures in severely deformed metals2017
- Author(s)
  M. Tanaka, T. Morikawa, K. Higashida
- Organizer
  The 15th International Conference on Advanced Materials
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H04147
[Presentation] Fe-Ni合金のマルテンサイト変態で生じた局所ひずみ分布に及ぼす水素の影響2017
- Author(s)
  加藤遼馬，森川龍哉，田中將己
- Organizer
  日本顕微鏡学会第60回記念シンポジウム，第59回九州支部学術講演会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 伸線パーライト鋼におけるデラミネーション発生と微細組織の関係2017
- Author(s)
  橋本英也，田中將己，森川龍哉，東田賢二，真鍋敏之
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 組織が低炭素鋼の脆性-延性遷移挙動に与える影響2017
- Author(s)
  吉田恭一朗，田中將己，森川龍哉
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] α-Ti多結晶体における降伏応力の温度依存性とその結晶塑性解析2017
- Author(s)
  奥山彫夢，林幸宏，森川龍哉，田中將己，河野義樹，大橋鉄也
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] BCC鉄系合金における圧延変形微視組織の形成と優先結晶方位の発達2017
- Author(s)
  森川龍哉，田中將己
- Organizer
  第1回金属・無機・有機材料の結晶方位解析と応用技術研究会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Thermally activated process of dislocation gliding at low temperatures in severely deformed metals2017
- Author(s)
  M. Tanaka, T. Morikawa, K. Higashida
- Organizer
  The 15th International Conference on Advanced Materials
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26249106
[Presentation] Formation of High Angle Boundaries during Cold‐rolling of Ti‐added Ultra Low Carbon Steel2017
- Author(s)
  T.Morikawa, S.Kira, K.Fukuda, M.Tanaka, K.Higashida, K.Kimura, K.Murakami, K.Ushioda
- Organizer
  18th International Conference on Textures of Materials
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 析出セメンタイトが低炭素鋼の脆性-延性遷移挙動に及ぼす影響2017
- Author(s)
  今山輝，田中將己，森川龍哉
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Fe-Ni合金のマルテンサイト変態で生じた局所ひずみ分布に及ぼす水素の影響2017
- Author(s)
  加藤遼馬，中村直人，森川龍哉，田中將己，東田賢二
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 低炭素鋼の脆性延性遷移挙動に及ぼす組織の影響2017
- Author(s)
  吉田恭一朗，森川龍哉，田中將己，名古秀徳，難波茂信
- Organizer
  平成29年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 冷間圧延されたFe-3%Al双結晶における不均一変形組織の発達と結晶方位分布2017
- Author(s)
  徳永真吾，森川龍哉，田中將己，東田賢二，村上健一，潮田浩作
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 軟質な第二相粒子が分散する合金の転位蓄積と加工硬化の結晶塑性解析2017
- Author(s)
  奥山彫夢，大橋鉄也，田中將己，森川龍哉
- Organizer
  平成29年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 鉄合金単結晶マイクロカンチレバーにおける力学特性の結晶方位依存性2017
- Author(s)
  カロカロハルナス, 奧山彫夢, 森川龍哉, 田中將己, 東田賢二
- Organizer
  日本鉄鋼協会174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H04147
[Presentation] 鉄合金単結晶マイクロカンチレバーにおける力学特性の結晶方位依存性2017
- Author(s)
  カロカロハルナス，東田賢二，田中將己，森川龍哉，奥山彫夢
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 低炭素鋼の脆性-延性遷移挙動に及ぼすセメンタイトの影響2017
- Author(s)
  今山輝，森川龍哉，田中將己，吉村信幸
- Organizer
  平成29年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 単結晶マイクロ試験片を用いた力学特性評価2016
- Author(s)
  カロカロハルナス, 藤崎基, 田中將己, 森川龍哉, 東田賢二,
- Organizer
  日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部平成28年度合同学術講演大会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-26249106
[Presentation] 単結晶マイクロ試験片を用いた臨界分解剪断応力評価2016
- Author(s)
  カロカロハルナス, 藤崎基, 田中將己, 森川龍哉, 東田賢二
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-26249106
[Presentation] 高窒素オーステナイトステンレス鋼の亀裂先端近傍における転位構造観察2016
- Author(s)
  藤崎基, 森川龍哉, 田中將己, 東田賢二, 土山聡宏, 小野本達郎
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15H04147
[Presentation] Formation of kink bands in a Mg-6at.%Zn-9at.%Y alloy2016
- Author(s)
  R.Kato, T.Morikawa, K.Higashida
- Organizer
  The 3rd International Symposium on Long-Period Stacking Ordered Structure and its Related Materials (LPSO2016)
- Place of Presentation
  Kyoto Japan
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Fe-Si-Ni3元系極低炭素鋼におけるBDT挙動と転位運動の関係2016
- Author(s)
  松尾健太，森川龍哉，田中將己，東田賢二，脇坂岳顕，潮田浩作
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 伸線パーライト鋼におけるデラミネーション発生の歪速度依存性2016
- Author(s)
  橋本英也，齊藤逸人，森川龍哉，田中將己，東田賢二
- Organizer
  平成28年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] αTiにおける疲労亀裂進展挙動2016
- Author(s)
  林幸宏，森川龍哉，田中將己，東田賢二
- Organizer
  平成28年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 冷間圧延されたFe-3%Al双結晶における変形組織の発達と結晶方位分布2016
- Author(s)
  徳永真吾，福田研介，森川龍哉，東田賢二，木村謙，潮田浩作
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Plastic strain distribution around king bands in Mg alloys with LPSO phase2016
- Author(s)
  T.Morikawa, R.Kato, K.Higashida
- Organizer
  The 3rd International Symposium on Long-Period Stacking Ordered Structure and its Related Materials (LPSO2016)
- Place of Presentation
  Kyoto Japan
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] α-Tiにおける疲労亀裂進展挙動の温度依存性2016
- Author(s)
  林幸宏，森川龍哉，田中將己，東田賢二
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Evolution of deformation microstructures in cold-rolled ferritic steel2016
- Author(s)
  Tatsuya Morikawa, Kenji Higashida
- Organizer
  International Conference on Processing&Manufacturing of Advanced Materials (THERMEC'2016)
- Place of Presentation
  Graz Austria
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 単結晶マイクロ試験片を用いた力学特性評価2016
- Author(s)
  カロカロハルナス，藤崎基，田中將己，森川龍哉，東田賢二
- Organizer
  平成28年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] シンクロ型LPSO構造のキンク変形ダイナミクスと強化機構2016
- Author(s)
  東田賢二，萩原幸司，森川龍哉
- Organizer
  日本金属学会第159回秋期講演大会
- Place of Presentation
  大阪市
- Invited
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 伸線パーライト鋼におけるデラミネーション発生と回転速度との関係2016
- Author(s)
  橋本英也，齊藤逸人，森川龍哉，田中將己，東田賢二
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Fe-Ni合金のマルテンサイト変態に伴う局所ひずみの発生2016
- Author(s)
  中村直人，森川龍哉，田中將己，東田賢二
- Organizer
  日本鉄鋼協会第172回秋季講演大会，日本金属学会
- Place of Presentation
  大阪市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Mg-Zn-Y合金に形成したキンク変形組織の3次元観察とひずみ分布解析2016
- Author(s)
  加藤遼馬，中村直人，森川龍哉，田中將己，東田賢二
- Organizer
  日本金属学会第159回秋期講演大会
- Place of Presentation
  大阪市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 冷間圧延されたFe-3%Al双結晶における結晶方位分布および変形組織の発達2016
- Author(s)
  徳永真吾，福田研介，森川龍哉，東田賢二，木村謙，潮田浩作
- Organizer
  平成28年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Plastic Strain Distribution around Kink Bands in LPSO Mg Alloy2016
- Author(s)
  T.Morikawa, K.Higashida, X.Lei, A.Nakatani
- Organizer
  9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9)
- Place of Presentation
  Kyoto Japan
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Mg-6at.%Zn-9at%Y一方向凝固材におけるキンク変形組織の3次元観察2016
- Author(s)
  加藤遼馬，中村直人，森川龍哉，東田賢二
- Organizer
  平成28年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  福岡市
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Distribution of Plastic Strain around Kink Bands in LPSO Mg Alloy2015
- Author(s)
  T.Morikawa, K.Higashida
- Organizer
  The 10th International Conference on Magnesium Alloys and Their Applications (Mg-2015)
- Place of Presentation
  Jeju, Korea
- Year and Date
  2015-10-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Deformation behaviors and strengthening mechanism on a Mg-based synchronized LPSO structure2015
- Author(s)
  K.Higashida, T.Morikawa and M.Fujiwara
- Organizer
  The 10th International Conference on Magnesium Alloys and Their Applications (Mg-2015)
- Place of Presentation
  Jeju, Korea
- Year and Date
  2015-10-13
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 微細マーカー法によるベイナイト-島状マルテンサイト複合組織鋼の不均一変形挙動の観察2015
- Author(s)
  森藤優，森川龍哉，東田賢二，安田恭野，石川信行
- Organizer
  平成27年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  北九州市
- Year and Date
  2015-06-06
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Plastic Strain Distribution around Kink Bands in LPSO Type Mg Alloys2015
- Author(s)
  T.Morikawa, K.Higashida
- Organizer
  The International Conference "Advanced Materials Week – 2015
- Place of Presentation
  Togliatti State University, Russia
- Year and Date
  2015-06-15
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Distribution of Plastic Strain around Kink Bands in LPSO Mg Alloy2015
- Author(s)
  T.Morikawa, K.Higashida
- Organizer
  The 10th International Conference on Magnesium Alloys and Their Applications (Mg-2015)
- Place of Presentation
  Jeju, Korea
- Year and Date
  2015-10-13
- Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Deformation behaviors and strengthening mechanism on a Mg-based synchronized LPSO structure2015
- Author(s)
  K.Higashida, T.Morikawa and M.Fujiwara
- Organizer
  The 10th International Conference on Magnesium Alloys and Their Applications (Mg-2015)
- Place of Presentation
  Jeju, Korea
- Year and Date
  2015-10-13
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] 微細マーカー法を用いたマルテンサイト変態による局所ひずみの解析2015
- Author(s)
  中村直人，森川龍哉，東田賢二
- Organizer
  平成27年度日本金属学会日本鉄鋼協会軽金属学会九州支部合同学術講演会
- Place of Presentation
  北九州市
- Year and Date
  2015-06-06
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Inhomogeneities in deformation microstructures in metals2015
- Author(s)
  K.Higashida, T.Morikawa and M.Fujiwara
- Organizer
  The International Conference "Advanced Materials Week – 2015
- Place of Presentation
  Togliatti State University, Russia
- Year and Date
  2015-06-15
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 微細マーカー法を用いたマルテンサイト変態による局所ひずみの解析2015
- Author(s)
  中村直人，森川龍哉，東田賢二
- Organizer
  日本鉄鋼協会第170回秋季講演大会
- Place of Presentation
  九州大学
- Year and Date
  2015-09-17
- Data Source
  KAKENHI-PROJECT-15K06489
[Presentation] Plastic Strain Distribution around Kink Bands in LPSO Type Mg Alloys2015
- Author(s)
  T.Morikawa, K.Higashida
- Organizer
  The International Conference "Advanced Materials Week – 2015
- Place of Presentation
  Togliatti State University, Russia
- Year and Date
  2015-06-15
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Mg-Zn-Y系LPSO単相合金におけるキンク変形の様相2014
- Author(s)
  森川龍哉，徳永尚史，野口量介，東田賢二
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島大学
- Year and Date
  2014-07-19
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Mg-Zn-Y合金における不均一塑性変形挙動2014
- Author(s)
  野口量介，徳永尚史，森川龍哉，東田賢二
- Organizer
  日本金属学会2014年秋期大会(第155回)
- Place of Presentation
  名古屋大学
- Year and Date
  2014-09-25
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] LPSO相を有するマグネシウム合金の高温における不均一変形挙動2013
- Author(s)
  野口量介，徳永尚史，樋口成起，森川龍哉，東田賢二
- Organizer
  日本金属学会2013年秋期大会(第153回)
- Place of Presentation
  金沢大学
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 長周期積層構造(LPSO)相における不均一変形(キンク帯)の様相2013
- Author(s)
  森川龍哉，東田賢二
- Organizer
  第3回結晶と組織の配向制御による材料高性能化研究会
- Place of Presentation
  伊勢市
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 長周期積層構造を有するマグネシウム合金におけるキンク帯の観察2013
- Author(s)
  徳永尚史，野口量介，樋口成起，森川龍哉，東田賢二
- Organizer
  日本金属学会2013年秋期大会(第153回)
- Place of Presentation
  金沢大学
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] LPSO相を含むマグネシウム合金における不均一変形組織の様相2013
- Author(s)
  森川龍哉，徳永尚史，野口量介，東田賢二
- Organizer
  第55回日本顕微鏡学会九州支部学術講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] LPSO型Mg合金の不均一変形挙動2013
- Author(s)
  野口量介，徳永尚史，樋口成起，森川龍哉，東田賢二
- Organizer
  平成25年度日本鉄鋼協会・日本金属学会・軽金属学会九州支部合同学術講演大会
- Place of Presentation
  熊本県民交流館パレア
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Characteristics of Deformation Microstructures in Mg Alloys with Synchronized Long-period Stacking Ordered Structure2013
- Author(s)
  Kenji Higashida and Tatsuya Morikawa
- Organizer
  The 8th Pacific RIM International Congress on Advanced Materials and Processing
- Place of Presentation
  Hilton Waikoloa Village, USA
- Invited
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 超高圧電子顕微鏡を用いた亀裂先端近傍における転位ネットワークの初期形成過程の解明2013
- Author(s)
  田中大樹, 定松直, 田中將己, 森川龍哉, 東田賢二
- Organizer
  日本金属学会2013年秋季講演大会(第153回)
- Place of Presentation
  金沢大学角間キャンパス, 金沢市
- Data Source
  KAKENHI-PROJECT-22246090
[Presentation] Microstructures of Kinks of Long Period Stacking Ordered Phases in Mg-Y-Zn Alloys2013
- Author(s)
  H.Gao, S.Tokunaga, K.Ikeda, T.Morikawa, K.Higashida, H.Nakashima
- Organizer
  日本機械学会2013年度年次大会計算力学部門企画ワークショップ「シンクロ型LPSO構造の力学特性と高強度Mg合金の変形機構（その2）
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] LPSO相を含むマグネシウム合金における不均一変形組織の様相2013
- Author(s)
  森川龍哉，徳永尚史，野口量介，東田賢二
- Organizer
  日本機械学会M&M2013材料力学カンファレンス
- Place of Presentation
  岐阜大学
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] HVEMを用いた亀裂先端近傍における転位ネットワークの初期形成過程の解明2013
- Author(s)
  田中大樹, 定松直, 田中將己, 森川龍哉, 東田賢二
- Organizer
  平成25年度日本鉄鋼協会・日本金属学会・軽金属学会九州支部合同学術講演大会
- Place of Presentation
  熊本県民交流館パレア, 熊本市
- Data Source
  KAKENHI-PROJECT-22246090
[Presentation] 超高圧電子顕微鏡を用いた亀裂先端近傍における転位ネットワークの初期形成過程の解明2013
- Author(s)
  田中大樹, 定松直, 田中將己, 森川龍哉, 東田賢二
- Organizer
  日本金属学会2013年秋季講演大会(第153回）
- Place of Presentation
  金沢大学
- Data Source
  KAKENHI-PROJECT-22246090
[Presentation] 方位配向させたマグネシウム合金の微細マーカー法を用いた不均一塑性変形解析2012
- Author(s)
  森川龍哉
- Organizer
  日本金属学会
- Place of Presentation
  倉敷市
- Year and Date
  2012-10-11
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] LPSO型マグネシウム合金の微細マーカー法を用いた不均一塑性変形解析2012
- Author(s)
  森川龍哉
- Organizer
  軽金属学会
- Place of Presentation
  習志野市
- Year and Date
  2012-11-11
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 長周期積層構造を有するマグネシウム合金の微細マーカー法を用いた不均一塑性変形解析2012
- Author(s)
  森川龍哉
- Organizer
  日本機械学会
- Place of Presentation
  愛媛大学
- Year and Date
  2012-09-23
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 方位配向させたマグネシウム合金の微細マーカー法を用いた不均一塑性変形解析2012
- Author(s)
  森川龍哉
- Organizer
  日本金属学会
- Place of Presentation
  倉敷市
- Year and Date
  2012-10-11
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 長周期積層構造を有するマグネシウム合金の微細マーカー法を用いた不均一塑性変形解析2012
- Author(s)
  森川龍哉
- Organizer
  日本機械学会
- Place of Presentation
  松山市
- Year and Date
  2012-09-23
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation behavior observed using High-Precision Markers Drawn by Electron Beam Lithography in a Hot-extruded Mg-5at.%Zn-7at.%Y Alloy2012
- Author(s)
  Tatsuya Morikawa
- Organizer
  International Symposium on Long-Period Stacking Ordered Structure and Its Ralated Materials(LPSO2012)
- Place of Presentation
  札幌市
- Year and Date
  2012-10-02
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] LPSO型マグネシウム合金の微細マーカー法を用いた不均一塑性変形解析2012
- Author(s)
  森川龍哉
- Organizer
  軽金属学会
- Place of Presentation
  千葉工業大学
- Year and Date
  2012-11-11
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Inhomogeneous Deformation behavior observed using High-Precision Markers Drawn by Electron Beam Lithography in a Hot-extruded Mg-5at.%Zn-7at.%Y Alloy2012
- Author(s)
  T.Morikawa
- Organizer
  LPSO2012
- Place of Presentation
  札幌市
- Year and Date
  2012-10-02
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Deformation Microstructures in Magnesium Alloy with Long-period Stacking Order Phase2012
- Author(s)
  Tatsuya Morikawa
- Organizer
  The 7th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys(YSR7)
- Place of Presentation
  瀋陽
- Year and Date
  2012-10-16
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Deformation Microstructures in Magnesium Alloy with Long-period Stacking Order Phase2012
- Author(s)
  T.Morikawa
- Organizer
  YSR7
- Place of Presentation
  瀋陽
- Year and Date
  2012-10-16
- Invited
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 微細マーカー法によるフェライト-マルテンサイト複合組織鋼の不均質変形挙動解析2011
- Author(s)
  南秀和, 森川龍哉, 他
- Organizer
  日本鉄鋼協会第162回秋期講演大会
- Place of Presentation
  大阪大学(吹田市)
- Year and Date
  2011-09-22
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 長周期積層構造相を含むマグネシウム合金押出材の不均一塑性変形解析2011
- Author(s)
  森川龍哉
- Organizer
  日本金属学会
- Place of Presentation
  浜松市
- Year and Date
  2011-10-22
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 冷間圧延したフェライト系鋼板に発達する不均一変形組織2011
- Author(s)
  中西冴, 森川龍哉, 他
- Organizer
  日本鉄鋼協会第162回秋期講演大会
- Place of Presentation
  大阪大学(吹田市)
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 微細マーカー法によるLPSO型マグネシウム合金における不均一塑性変形解析2011
- Author(s)
  森川龍哉
- Organizer
  日本機械学会
- Place of Presentation
  北九州市
- Year and Date
  2011-07-17
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] INHOMOGENEOUS DEFORMATION BEHAVIORS ANALYZED BY HIGH PRECISION MARKERS IN A WARM-EXTRUDED MAGNESIUM ALLOY WITH LPSO PHASE2011
- Author(s)
  T.Morikawa, et al
- Organizer
  International Conference on Processing & Manuf acturing of Advanced Materials (THERMEC' 2011)
- Place of Presentation
  カナダ,ケベック(招待講演)
- Year and Date
  2011-08-03
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] INHOMOGENEOUS DEFORMATION BEHAVIORS ANALYZED BY HIGH PRECISION MARKER METHOD IN A WARM-EXTRUDED MAGN ESIUM ALLOY WITH LPSO PHASE2011
- Author(s)
  T.Morikawa, et al
- Organizer
  6th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys and their Applications, together with the 6th KITECH-KUMAMOTO International Symposium on Bulk Metallic Glasses and Advanced Materials (YSR6)
- Place of Presentation
  韓国,ソウル(招待講演)
- Year and Date
  2011-11-23
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] INHOMOGENEOUS DEFORMATION BEHAVIORS ANALYZED BY HIGH PRECISION MARKER METHOD IN A WARM-EXTRUDED MAGNESIUM ALLOY WITH LPSO PHASE2011
- Author(s)
  Tatsuya Morikawa
- Organizer
  6th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys and their Applications, together with the 6th KITECH-KUMAMOTO International Symposium on Bulk Metallic Glasses and Advanced Materials (YSR6)
- Place of Presentation
  Seoul, Korea
- Year and Date
  2011-11-23
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation Behaviors Analyzed by High Precision Marker Method in a Warm-extruded Magnesium Alloy with LPSO Phase2011
- Author(s)
  T.Morikawa, et al
- Organizer
  6th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys and their Applications, together with the 6th KITECH-KUMAMOTO International Symposium on Bulk Metallic Glasses and Advanced Materials (YSR6)
- Place of Presentation
  韓国,ソウル
- Year and Date
  2011-11-23
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] INHOMOGENEOUS DEFORMATION BEHAVIORS ANALYZED BY HIGH PRECISION MARKERS IN A WARM-EXTRUDED MAGNESIUM ALLOY WITH LPSO PHASE2011
- Author(s)
  Tatsuya Morikawa
- Organizer
  International Conference on Processing & Manufacturing of Advanced Materials (THERMEC' 2011)
- Place of Presentation
  Quebec, Canada
- Year and Date
  2011-08-03
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation Behaviors Analyzed by High Precision Markers in a Warm-extruded Magnesium Alloy with LPSO Phase2011
- Author(s)
  T.Morikawa, et al
- Organizer
  International Conference on Processing & Manufacturing of Advanced Materials (THERMEC'2011)
- Place of Presentation
  カナダ,ケベック
- Year and Date
  2011-08-03
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] 長周期積層構造相を有するマグネシウム合金の組織と力学的性質2010
- Author(s)
  森川龍哉
- Organizer
  日本金属学会
- Place of Presentation
  飛騨市
- Year and Date
  2010-10-22
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous deformation behaviors and their effects on mechanical performance in a warm-extruded magnesium alloy with LPSO phase2010
- Author(s)
  T.Morikawa, et al.
- Organizer
  The 5th Pan-Yellow Sea Rim (YSR5) International Symposium on Magnesium Alloys
- Place of Presentation
  gis MOTC Convention Center (Taiwan)
- Year and Date
  2010-11-16
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous deformation behaviors and their effects on mechanical performance in a warm-extruded magnesium alloy with LPSO phase2010
- Author(s)
  Tatsuya Morikawa
- Organizer
  The 5th Pan-Yellow Sea Rim (YSR5) International Symposium on Magnesium Alloys
- Place of Presentation
  Taipei, Taiwan
- Year and Date
  2010-11-16
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation Behaviors Analyzed by High Precision Markers in a Warm-Extruded Magnesium Alloy with LPSO Phase2010
- Author(s)
  Tatsuya Morikawa
- Organizer
  The 6th KU-KITECH International Symposium on Bulk Metallic Glasses and Advanced Materials
- Place of Presentation
  熊本市
- Year and Date
  2010-09-14
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous deformation behaviors and their effects on mechanical performance in a warm-extruded magnesium alloy with LPSO phase2010
- Author(s)
  T.Morikawa, et al.
- Organizer
  The 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM7)
- Place of Presentation
  Cairns Convention Centre (Australia)
- Year and Date
  2010-08-05
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 長周期積層構造相を有するマグネシウム合金の組織と力学的性質2010
- Author(s)
  森川龍哉, 他
- Organizer
  日本金属学会分科会結晶方位と組織の制御研究会
- Place of Presentation
  飛騨地域地場産業振興センター(飛騨市)
- Year and Date
  2010-10-22
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation Behaviors Analyzed by High Precision Markers in a Warm-Extruded Magnesium Alloy with LPSO Phase2010
- Author(s)
  T.Morikawa, et al.
- Organizer
  The 6th KU-KITECH International Symposium on Bulk Metallic Glasses and Advanced Materials
- Place of Presentation
  熊本大学(熊本市)
- Year and Date
  2010-09-15
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous deformation behaviors and their effects on mechanical performance in a warm-extruded magnesium alloy with LPSO phase2010
- Author(s)
  Tatsuya Morikawa
- Organizer
  The 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM7)
- Place of Presentation
  Cairns, Australia
- Year and Date
  2010-08-05
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] LPSO型マグネシウム合金の微細マーカー法を用いた不均一塑性変形解析
- Author(s)
  森川龍哉
- Organizer
  軽金属学会
- Place of Presentation
  千葉工業大学
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation behavior observed using High-Precision Markers Drawn by Electron Beam Lithography in a Hot-extruded Mg-5at.%Zn-7at.%Y Alloy
- Author(s)
  T. Morikawa
- Organizer
  LPSO2012
- Place of Presentation
  札幌市
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] Inhomogeneous Deformation Microstructures in a Magnesium Alloy with LPSO Phase
- Author(s)
  T.Morikawa, R.Noguchi and K.Higashida
- Organizer
  The 2nd International Symposium on Long-Period Stacking Ordered Structure and Its Related Materials 2014
- Place of Presentation
  Kumamoto
- Year and Date
  2014-10-05 – 2014-10-08
- Data Source
  KAKENHI-PLANNED-23109008
[Presentation] Deformation Microstructures in Magnesium Alloy with Long-period Stacking Order Phase
- Author(s)
  T. Morikawa
- Organizer
  YSR7
- Place of Presentation
  瀋陽
- Invited
- Data Source
  KAKENHI-PROJECT-22560701
[Presentation] 超高圧電子顕微鏡による亀裂先端の転位観察
- Author(s)
  田中大樹, 高田康祐, 田中將己, 森川龍哉, 東田賢二
- Organizer
  日本金属学会2014年秋季講演大会(第155回）
- Place of Presentation
  名古屋大学
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-26249106
[Presentation] 長周期積層構造を有するマグネシウム合金の微細マーカー法を用いた不均一塑性変形解析
- Author(s)
  森川龍哉
- Organizer
  日本機械学会
- Place of Presentation
  愛媛大学
- Data Source
  KAKENHI-PROJECT-22560701

1. HIGASHIDA Kenji (70156561)

# of Collaborated Projects: 15 results

# of Collaborated Products: 54 results
2. TANAKA Masaki (40452809)

# of Collaborated Projects: 11 results

# of Collaborated Products: 60 results
3. ARAMAKI Masatoshi (50175973)

# of Collaborated Projects: 8 results

# of Collaborated Products: 0 results
4. ONODERA Ryuta (40038021)

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
5. NOGUCHI Hiroshi (80164680)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. KANEKO Kenji (30336002)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. MATSUMURA Syo (60150520)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. 奥山彫夢 (50804655)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
9. 山崎重人 (00804741)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. OHASHI Tetsuya (80312445)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. HAGIHARA Kohji (10346182)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. FUJIWARA Masami (40156930)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
13. SUZUKI Mayumi (20292245)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. SHIMOKAWA Tomotsugu (40361977)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. YAMAGUCHI Masatake (50360417)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. TAKAKI Setsuo (90150490)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. TSUCHIYAMA Toshihiro (40315106)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. NAKASHIMA Koichi (30363378)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. NAKADA Nobuo (50380580)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. NAKASHIMA Hideharu (80180280)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. 定松直 (10709554)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MORIKAWA Tatsuya 森川 龍哉

森川 龍也 モリカワ タツヤ

Research Projects

Research Products

Co-Researchers

Recrystallization Nucleation Mechanism Based on a New Sequential Observation Method for Inhomogeneously Deformed Microstructures in Cold-rolled SteelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Establishment of Numerical Method of Local Plastic Strain by Nanoscale MarkingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

The establishment of a estimating method of plastic strain distribution due to construction of multi-scale markingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Analysis of Plastic Strain Distribution Using High-Precision Grid-Markers Drawn by Electron Beam LithographyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

MORIKAWA Tatsuya 森川龍哉

森川龍也モリカワタツヤ