SAKAMOTO SHIGEHIKO 坂本重彦

… Alternative Names

Sakamoto Shigehiko 坂本重彦

SAKAMOTO Shigehiko 坂本重彦

Less

Researcher Number	00315285
Other IDs
Affiliation (Current)	2025: 金沢工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2021 – 2024: 金沢工業大学, 工学部, 教授 2019 – 2020: 熊本大学, 大学院先端科学研究部(工), 准教授 2007 – 2008: Kumamoto University, 大学院・自然科学研究科, 准教授 2004: 熊本大, 工学部, 講師 1999 – 2003: 熊本大学, 工学部, 講師
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies / 機械工作・生産工学 Except Principal Investigator 機械工作・生産工学 / Basic Section 18020:Manufacturing and production engineering-related
Keywords	Principal Investigator 難削材 / 超精密切削 / キューブ加工 / ステンレス鋼 / 切削抵抗 / 工具経路 / 5軸制御マシニング / 5軸制御マシニングセンタ / 形状創成理論 / 精度試験 … More / 加工試験方法 / 高機能性表面 / 焼入れ鋼 / 射出成形用金型材料 / 硬度 / 高硬度 / マルテンサイト変態 / バニシング加工 / マルテンサイト / オーステナイト / 切削加工 / 加工能率向上 / 表面改質 / ナノ構造 / モニタリング / 工具摩耗 / 超平滑仕上面 / ナノメートル / ミスト供給 / コーティングバイト / チタン合金 / 純チタン / 超精密切削加工 / 圧電素子 / 切削油剤 / 仕上面粗さ / ダイヤモンドバイト / コーティング工具 … More Except Principal Investigator 砥石粒度 / 粗粒ダイヤモンド砥石 / 研削条件 / 砥石作業面 / ダイヤモンド砥石 / 高能率化 / 延性モード研削 / 超平滑研削 / ファインセラミックス / ハイブリッド加工 / ヘール仕上げ / 高能率加工 / 駆動型ロータリ加工 / ニオブチタン合金 / Grinding Condition / Grinding wheel Surface / Coarse Grain / Diamond wheel / High Removal Rate / Ductile-mode Grinding / Ultra-Smoothness Grinding / Fine ceramics / 粗粒ダイヤモンド砥粒 / ファインセラミック / ナノメータ / 研磨レス研削 / GRINDING CONDITION / GRINDING WHEEL SURFACE / COARSE GRAIN / DIAMOND WHEEL / HIGH REMOVAL RATE / DUCTILE-MODEGRINDING / ULTRA-SMOOTHNESS GRINDING / FINE CERAMICS / 粗粒 Less

骨に近いニオブチタン合金を対象としたハイブリッド型ロータリヘール加工技術の構築
- Principal Investigator
  
  加藤秀治
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
Proposal of Cube Machining Test Method Based on Form-Shaping-Functinon Theory for Machine ToolsPrincipal Investigator
- Principal Investigator
  
  坂本重彦
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
Fabrication of functional surface by ultra-precision cutting of mold materials for plastic injection moldingPrincipal Investigator
- Principal Investigator
  
  Sakamoto Shigehiko
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Kanazawa Institute of Technology
  Kumamoto University
Study on the nano-structure analysis for improvement of surfacequality of stainless steel by cuttingPrincipal Investigator
- Principal Investigator
  
  SAKAMOTO Shigehiko
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kumamoto University
難削材の超精密切削における高応答・高精度型加工状態監視システムの構築Principal Investigator
- Principal Investigator
  
  坂本重彦
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kumamoto University
Ultra-smoothness Grinding Mechanism of Fine Ceramics with Metal Bonded #140 Diamond Wheel
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kumamoto University
ネットワーク対応機械加工システムのためのセンシング技術に関する研究Principal Investigator
- Principal Investigator
  
  坂本重彦
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kumamoto University
HIGH REMOVAL ULTRA-SMOOTHNESS GRINDING OF VARIOUS KINDS OF FINE CERAMICS WITH #140-MESHMETAL BONDED DIAMOND WHEEL
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KUMAMOTO UNIVERSITY

All 2024 2023 2021 2020 2019 2009 2008

All Journal Article Presentation Patent

[Journal Article] Study on the influence of geometric errors in rotary axes on cubic-machining test considering the workpiece coordinate system2021
- Author(s)
  Li Zongze、Sato Ryuta、Shirase Keiichi、Sakamoto Shigehiko
- Journal Title
  
  Precision Engineering
  
  Volume: 71 Pages: 36-46
- DOI
  10.1016/j.precisioneng.2021.02.011
- NAID
  120007097052
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19K04127
[Journal Article] Influence of Tool Length and Profile Errors on the Inaccuracy of Cubic-Machining Test Results2021
- Author(s)
  Li Zongze、Ogata Hiroki、Sato Ryuta、Shirase Keiichi、Sakamoto Shigehiko
- Journal Title
  
  Journal of Manufacturing and Materials Processing
  
  Volume: 5 Issue: 2 Pages: 51-51
- DOI
  10.3390/jmmp5020051
- NAID
  120007115797
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19K04127
[Journal Article] Work affected layer of the finished surface in precision cutting of austenitic stainless steel2008
- Author(s)
  S. Sakamoto
- Journal Title
  
  Proceedings of the euspen International Conference 2008 10, Vol. II
  
  Pages: 253-257
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560120
[Journal Article] Work affected layer ofthe finished surface in precisioncutting of austenitic stainless steel2008
- Author(s)
  S. Sakamoto, Y. Kajiwara, T. Matsutori
- Journal Title
  
  Proceedings of the euspen International Conference 2008
  
  Pages: 253-257
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560120
[Patent] 穴あけ加工方法2009
- Inventor(s)
  坂本重彦, 住友電気工業(株), 住友電工ハードメタル(株)
- Industrial Property Rights Holder
  坂本重彦, 住友電気工業(株), 住友電工ハードメタル(株)
- Industrial Property Number
  2009-022535
- Filing Date
  2009-02-03
- Data Source
  KAKENHI-PROJECT-19560120
[Presentation] キューブ加工における5軸マシニングセンタの各種構造が加工面に及ぼす幾何学的影響2024
- Author(s)
  前田　祐能，坂本　重彦，加藤　秀治
- Organizer
  2024年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-23K22653
[Presentation] 5軸制御工作機械のキューブ加工における加工面精度に関する実験的検討2024
- Author(s)
  松田　光輝，坂本　重彦，加藤　秀治
- Organizer
  2024年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-23K22653
[Presentation] 5軸マシニングセンタの精度評価におけるキューブ加工の空間領域に関する研究2023
- Author(s)
  土手口慎哉，坂本重彦，加藤秀治，佐藤隆太，井原之敏
- Organizer
  2023年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-23K22653
[Presentation] Tool Path Design of Cube-machining Test to Minimize Influence of Z-axis Reversal Error Motion2023
- Author(s)
  Ryuta SATO, Zongze LI and Shigehiko SAKAMOTO
- Organizer
  The International Conference on Leading Edge Manufacturing/Materials & Processing (LEM&P 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22653
[Presentation] Influence of Tool Length and Profile Errors on Cubic-machining Test Accuracy2021
- Author(s)
  Zongze LI, Hiroki OGATA, Ryuta SATO, Keiichi SHIRASE, Shigehiko SAKAMOTO
- Organizer
  Proceedings of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] Simulation of Cubic-machining Tests by Five-axis Machining Center with the Consideration of Workpiece Coordinate System2020
- Author(s)
  Zongze LI, Ryuta SATO, Keiichi SHIRASE, Shigehiko SAKAMOTO
- Organizer
  Proceedings of the 18th International Conference on Precision Engineering (ICPE2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] 正方形3x3加工法による5軸マシニングセンタの精度評価に関する研究2020
- Author(s)
  坂本重彦、鈴木敏弘、中安和正
- Organizer
  2020年度精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] Error Analysis By Square 3X3 Machining Method For Five-Axis Machining Centers2020
- Author(s)
  Shigehiko SAKAMOTO, Atsushi YOKOYAMA, Kazumasa NAKAYASU, Toshihiro SUZUKI, Shinji KOIKE
- Organizer
  Proceedings of the JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] Accuracy evaluation method on the five-axis machining centers by Square 3x3 machining2020
- Author(s)
  Shigehiko SAKAMOTO, Atsushi YOKOYAMA, Kazumasa NAKAYASU, Toshihiro SUZUKI, Shinji KOIKE, Ryuta SATO
- Organizer
  Proceedings of the 18th International Conference on Precision Engineering (ICPE2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] 多軸マシニングセンタにおけるロータリテーブルの組立誤差に関する精度解析2019
- Author(s)
  坂本重彦、長野広明、宮下宗仁、宮野雅之、鈴木敏弘、小池伸二
- Organizer
  日本機械学会第 13 回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] Square 3x3 machining method for accuracy evaluation of five-axis machining centers2019
- Author(s)
  Shigehiko Sakamoto, Toshihiro Suzuki, Kazumasa Nakayasu and Shinji Koike
- Organizer
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] 多軸制御工作機械の同軸度に関する定義法2019
- Author(s)
  坂本重彦、横山惇史、宮下宗仁、宮野雅之、鈴木敏弘、小池伸二
- Organizer
  2019年度精密工学会中国四国支部・九州支部佐世保地方講演会
- Data Source
  KAKENHI-PROJECT-19K04127
[Presentation] CFRPのヘリカル加工における穴あけに関する研究-各種エンドミルによる加工精度への影響-2008
- Author(s)
  坂本重彦, 東二町圭介
- Organizer
  日本機械学会第7回生産加工・工作機械部門講演会講演論文集
- Place of Presentation
  岐阜
- Year and Date
  2008-11-21
- Data Source
  KAKENHI-PROJECT-19560120

1. YASUI Heiji (30040398)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
2. SAKATA Masato (20040652)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. 加藤秀治 (90278101)

# of Collaborated Projects: 2 results

# of Collaborated Products: 3 results
4. 森本喜隆 (00290734)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 佐藤隆太 (60376861)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
6. 井原之敏 (90213199)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results

SAKAMOTO SHIGEHIKO 坂本 重彦

Sakamoto Shigehiko 坂本 重彦

SAKAMOTO Shigehiko 坂本 重彦

Research Projects

Research Products

Co-Researchers

骨に近いニオブチタン合金を対象としたハイブリッド型ロータリヘール加工技術の構築

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Proposal of Cube Machining Test Method Based on Form-Shaping-Functinon Theory for Machine ToolsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Fabrication of functional surface by ultra-precision cutting of mold materials for plastic injection moldingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Study on the nano-structure analysis for improvement of surfacequality of stainless steel by cuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

難削材の超精密切削における高応答・高精度型加工状態監視システムの構築Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ultra-smoothness Grinding Mechanism of Fine Ceramics with Metal Bonded #140 Diamond Wheel

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ネットワーク対応機械加工システムのためのセンシング技術に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

HIGH REMOVAL ULTRA-SMOOTHNESS GRINDING OF VARIOUS KINDS OF FINE CERAMICS WITH #140-MESHMETAL BONDED DIAMOND WHEEL

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Study on the influence of geometric errors in rotary axes on cubic-machining test considering the workpiece coordinate system2021

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] Influence of Tool Length and Profile Errors on the Inaccuracy of Cubic-Machining Test Results2021

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] Work affected layer of the finished surface in precision cutting of austenitic stainless steel2008

Author(s)

Journal Title

Data Source

[Journal Article] Work affected layer ofthe finished surface in precisioncutting of austenitic stainless steel2008

Author(s)

Journal Title

Data Source

[Patent] 穴あけ加工方法2009

Inventor(s)

Industrial Property Rights Holder

Industrial Property Number

Filing Date

Data Source

SAKAMOTO SHIGEHIKO 坂本重彦

Sakamoto Shigehiko 坂本重彦

SAKAMOTO Shigehiko 坂本重彦