NAKAMURA MORIMASA 中村守正

… Alternative Names

Nakamura Morimasa 中村守正

Less

Researcher Number	00464230
Other IDs
Affiliation (Current)	2025: 同志社大学, 理工学部, 教授
Affiliation (based on the past Project Information) *help	2019 – 2020: 同志社大学, 理工学部, 准教授 2016 – 2018: 京都工芸繊維大学, 機械工学系, 准教授 2016: 京都工芸繊維大学, ものづくり教育研究センター, 准教授 2015: 京都工芸繊維大学, 機械工学系, 助教
Review Section/Research Field	Principal Investigator Basic Section 18040:Machine elements and tribology-related / Design engineering/Machine functional elements/Tribology Except Principal Investigator Design engineering/Machine functional elements/Tribology
Keywords	Principal Investigator ドライコーティング / ラマン / DLC / 破壊 / 強度 / 物性 / 力学特性 / 硬質皮膜 / 表面改質 / 面圧 … More / 繰り返し / 損傷 / 評価 / DLC膜 … More Except Principal Investigator ４軸印刷機 / レーザー焼結 / 故障診断 / 印刷センサ / 導電性インク / スマートギヤ / 損傷検知 Less

Effects of Mechanical and Structural Properties in Plane on Fatigue Strength of DLC Films -For Super Long Life-Principal Investigator
- Principal Investigator
  
  Nakamura Morimasa
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Doshisha University
  Kyoto Institute of Technology
Smart Gears Featuring Prognostics as Integrity-Loss Detector
- Principal Investigator
  
  MORIWAKI Ichiro
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Kyoto Institute of Technology
High-Speed Cyclic Indentation Test and Fracture Mechanisms of DLC coatingsPrincipal Investigator
- Principal Investigator
  
  Nakamura Morimasa
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Kyoto Institute of Technology

All 2021 2020 2019 2018 2017 2016 2015

All Journal Article Presentation

[Journal Article] Relationships between Raman parameters obtained from cyclic indentation impressions on DLC coatings2020
- Author(s)
  Takagawa Yuka、Nakamura Morimasa、Miura Ken‐ichi、Kobata Junpei
- Journal Title
  
  Surface and Interface Analysis
  
  Volume: 2020 Issue: 12 Pages: 1-5
- DOI
  10.1002/sia.6780
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03906
[Journal Article] 2.Fabrication of antennas on spur gears for condition monitoring by conductive-ink print2018
- Author(s)
  S. Futagawa, D. Iba, T. Kamimoto, M. Nakamura, N. Miura, T. Iizuka, A. Masuda, A. Sone, I. Moriwaki
- Journal Title
  
  Proceedings of International Gear Conference
  
  Volume: － Pages: 1418-1426
- Data Source
  KAKENHI-PROJECT-16H04258
[Journal Article] CYCLIC INDENTATION TEST FOR EVALUATING STRENGTH OF DLC FILMS2017
- Author(s)
  Morimasa NAKAMURA, Ryohei KURIHARA, Fumihiro NAKAYAMA, Ken-ichi MIURA, Jyunpei KOBATA
- Journal Title
  
  Proceedings of The JSME International Conference on Motion and Power Transmissions
  
  Volume: Vol. Ⅱ Pages: 388-392
- NAID
  130006008620
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K21120
[Journal Article] Effects of Indentation Cycles on Damage of DLC Films through Cyclic Indentation Tests2017
- Author(s)
  Morimasa Nakamura, Ryohei Kurihara, Ken-ichi Miura, Jyunpei Kobata and Takayuki Nagataki
- Journal Title
  
  Proceedings of The 7th International Conference on Manufacturing, Machine Design and Tribology
  
  Volume: なし Pages: 24-24
- Data Source
  KAKENHI-PROJECT-15K21120
[Journal Article] CYCLIC INDENTATION TEST FOR EVALUTING STRENGTH OF DLC FILMS2017
- Author(s)
  Morimasa NAKAMURA, Ryohei KURIHARA, Fumihiro NAKAYAMA, Ken-ichi MIURA, Jyunpei KOBATA
- Journal Title
  
  Proceedings of The JSME International Conference on Motion and Power Transmissions
  
  Volume: - Pages: 388-392
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K21120
[Journal Article] Printed gear sensor for health monitoring (Development of three-axis laser printer for conductive ink and evaluation of laser-sintered electric circuits)2017
- Author(s)
  Daisuke IBA, Shintaro FUTAGAWA, Takahiro KAMIMOTO, Morimasa NAKAMURA, Nanako MIURA, Takashi IIZUKA, Arata MASUDA, Akira SONE, Ichiro MORIWAKI
- Journal Title
  
  JAMDSM
  
  Volume: 11 Issue: 6 Pages: JAMDSM0090-JAMDSM0090
- DOI
  10.1299/jamdsm.2017jamdsm0090
- NAID
  130006267903
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16H04258
[Journal Article] Effects of Indentation Cycles on Damage of DLC Films through Cyclic Indentation Tests2017
- Author(s)
  Morimasa Nakamura, Ryohei Kurihara, Ken-ichi Miura, Jyunpei Kobata, Takayuki Nagataki
- Journal Title
  
  Proceedings The 7th International Conference on Manufacturing, Machine Design and Tribology
  
  Volume: - Pages: 24-24
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] ボイスコイルモータを用いたDLC膜の繰返し押付け試験機の開発および圧痕の評価2021
- Author(s)
  木村一貴，中村守正，松岡敬
- Organizer
  日本機械学会関西支部第96期定時総会講演会（オンライン）
- Data Source
  KAKENHI-PROJECT-18K03906
[Presentation] ボイスコイルモータを用いたDLC膜の繰返し押付け試験機の開発2020
- Author(s)
  木村一貴，中村守正，松岡敬
- Organizer
  第22回関西表面技術フォーラム（オンライン）
- Data Source
  KAKENHI-PROJECT-18K03906
[Presentation] 超音波振動子を用いたギガサイクル繰返し押付け試験機によるDLC膜の損傷評価 -損傷形態に及ぼす成膜条件の影響-2020
- Author(s)
  山元拓真，中村守正，松岡敬，三浦健一，小畠淳平
- Organizer
  第22回関西表面技術フォーラム（オンライン）
- Data Source
  KAKENHI-PROJECT-18K03906
[Presentation] 超音波振動子を用いたギガサイクル繰返し押付け試験によるDLC 膜の損傷評価2020
- Author(s)
  山元拓真，中村守正，松岡敬
- Organizer
  2020年度砥粒加工学会学術講演会，秋田（オンライン）
- Data Source
  KAKENHI-PROJECT-18K03906
[Presentation] Relationships between Raman parameters obtained from cyclic indentation impressions on DLC coatings2019
- Author(s)
  Takagawa Yuka、Nakamura Morimasa、Miura Ken‐ichi、Kobata Junpei
- Organizer
  18th European Conference on Applications of Surface and Interface Analysis
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03906
[Presentation] Conductive ink print on PA66 gear for manufacturing condition monitoring sensors2018
- Author(s)
  Shintaro Futagawa, Daisuke Iba, Takahiro Kamimoto, Morimasa Nakamura, Nanako Miura, Takashi Iizuka, Arata Masuda, Akira Sone, Ichiro Moriwaki
- Organizer
  SPIE 10602, Smart Structures and NDE for Industry 4.0
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] 繰り返し球圧子押し付け後のDLC膜構造変化2018
- Author(s)
  髙川祐加，中村守正
- Organizer
  日本塑性加工学会関西支部　平成 30 年度　関西支部　若手技術交流会　兼　関西支部　第 36 回先端塑性加工技術コロキウム
- Data Source
  KAKENHI-PROJECT-18K03906
[Presentation] CYCLIC INDENTATION TEST FOR EVALUTING STRENGTH OF DLC FILMS2017
- Author(s)
  Morimasa NAKAMURA, Ryohei KURIHARA, Fumihiro NAKAYAMA, Ken-ichi MIURA, Jyunpei KOBATA
- Organizer
  MPT2017-Kyoto The JSME International Conference on Motion and Power Transmissions
- Place of Presentation
  京都市
- Year and Date
  2017-02-28
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] Development of sensing systems printed with conductive ink on gear surfaces: manufacturing of meander line antenna by laser-sintered silver nano-particles2017
- Author(s)
  D. Iba, S. Futagawa, T. Kamimoto, N. Miura, M. Nakamura, T. Iizuka, A. Masuda, A. Sone, I. Moriwaki
- Organizer
  Proc. SPIE 10168, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017
- Place of Presentation
  Portland, Oregon, USA
- Year and Date
  2017-03-25
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] Effects of Indentation Cycles on Damage of DLC Films through Cyclic Indentation Tests2017
- Author(s)
  Morimasa Nakamura, Ryohei Kurihara, Ken-ichi Miura, Jyunpei Kobata, Takayuki Nagataki
- Organizer
  The 7th International Conference on Manufacturing, Machine Design and Tribology
- Place of Presentation
  韓国
- Year and Date
  2017-04-19
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] CYCLIC INDENTATION TEST FOR EVALUATING STRENGTH OF DLC FILMS2017
- Author(s)
  中村守正
- Organizer
  The JSME International Conference on Motion and Power Transmissions MPT2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] 繰返し押付け試験によるDLC膜の強度評価押付け速度の影響2017
- Author(s)
  中村守正
- Organizer
  2017 年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] Print of crack detection sensor for spur gears by laser sintering of conductive ink2017
- Author(s)
  D. Iba, S. Futagawa, T. Kamimoto, M. Nakamura, N. Miura, T. Iizuka, A. Masuda, A. Sone, I, Moriwaki
- Organizer
  International Conference on Gears 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] POM製平歯車側面への導電性インクの印刷によるき裂検知センサの製作2017
- Author(s)
  二川真太郎, 射場大輔，神本貴裕，中村守正，三浦奈々子，飯塚高志，増田新，曽根彰，森脇一郎
- Organizer
  日本機械学会2017年度年次大会
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] DEVELOPMENT OF PRINTED SENSOR FOR GEAR HEALTH MONITORING SYSTEM (DEVELOPMENT OF THREE-AXIS PRINTER FOR CONDUCTIVE INK LASER SINTERING PROCESS AND PROPERTIES EVALUATION OF SINTERED ELECTRIC CIRCUIT)2017
- Author(s)
  Takahiro KAMIMOTO, Daisuke IBA, Shintaro FUTAGAWA, Morimasa NAKAMURA, Nanako MIURA, Takashi IIZUKA, Arata MASUDA, Akira SONE, Ichiro MORIWAKI
- Organizer
  The JSME International Conference on Motion and Power Transmissions (MPT 2017 - Kyoto)
- Place of Presentation
  京都
- Year and Date
  2017-03-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] Effects of Indentation Cycles on Damage of DLC Films through Cyclic Indentation Tests2017
- Author(s)
  中村守正
- Organizer
  The 7th International Conference on Manufacturing, Machine Design and Tribology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] 導電性インクのレーザー焼結によるインボリュート曲線の印刷2016
- Author(s)
  神本貴祐, 射場大輔, 二川真太郎, 中村守正, 三浦奈々子, 飯塚高志, 増田新, 森脇一郎, 曽根彰
- Organizer
  第15回評価・診断に関するシンポジウム
- Place of Presentation
  京都
- Year and Date
  2016-12-15
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] Development of 3-axis laser printing system for manufacturing smart gear sensor systems (printing conditions by laser sintering and prototyping of meander line antenna)2016
- Author(s)
  D. Iba, R. Rodriguez Lopez, S. Futagawa, T. Kamimoto, M. Nakamura, N. Miura, T. Iizuka, A. Masuda, A. Sone and I. Moriwaki
- Organizer
  International Conference on Advanced Materials, Mechanics and Manufacturing
- Place of Presentation
  Hammamet, Tunisia
- Year and Date
  2016-12-19
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04258
[Presentation] 樹脂歯車運転試験によるDLC 膜の強度評価（高速度カメラ映像による損傷モードの把握）2015
- Author(s)
  山極洸士，中村守正，射場大輔，森脇一郎
- Organizer
  2015 年度日本機械学会年次大会
- Place of Presentation
  北海道大学
- Year and Date
  2015-09-14
- Data Source
  KAKENHI-PROJECT-15K21120
[Presentation] DLC膜の強度評価を目的とした歯車運転試験の適用可能性2015
- Author(s)
  中村守正，山極洸士，三浦健一，小畠淳平，長瀧敬行，射場大輔，森脇一郎
- Organizer
  トライボロジー会議2015春姫路
- Place of Presentation
  姫路商工会議所
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-15K21120

1. MORIWAKI Ichiro (20157936)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
2. 射場大輔 (10402984)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
3. 曽根彰 (20197015)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
4. 三浦奈々子 (80735340)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
5. 増田新 (90252543)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
6. 飯塚高志 (60335312)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
7. 小畠淳平 (00566424)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results

NAKAMURA MORIMASA 中村 守正

Nakamura Morimasa 中村 守正

Research Projects

Research Products

Co-Researchers

Effects of Mechanical and Structural Properties in Plane on Fatigue Strength of DLC Films -For Super Long Life-Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Smart Gears Featuring Prognostics as Integrity-Loss Detector

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High-Speed Cyclic Indentation Test and Fracture Mechanisms of DLC coatingsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Relationships between Raman parameters obtained from cyclic indentation impressions on DLC coatings2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] 2.Fabrication of antennas on spur gears for condition monitoring by conductive-ink print2018

Author(s)

Journal Title

Data Source

[Journal Article] CYCLIC INDENTATION TEST FOR EVALUATING STRENGTH OF DLC FILMS2017

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Effects of Indentation Cycles on Damage of DLC Films through Cyclic Indentation Tests2017

Author(s)

Journal Title

Data Source

[Journal Article] CYCLIC INDENTATION TEST FOR EVALUTING STRENGTH OF DLC FILMS2017

Author(s)

Journal Title

Data Source

[Journal Article] Printed gear sensor for health monitoring (Development of three-axis laser printer for conductive ink and evaluation of laser-sintered electric circuits)2017

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Effects of Indentation Cycles on Damage of DLC Films through Cyclic Indentation Tests2017

Author(s)

Journal Title

Data Source

[Presentation] ボイスコイルモータを用いたDLC膜の繰返し押付け試験機の開発および圧痕の評価2021

Author(s)

Organizer

Data Source

[Presentation] ボイスコイルモータを用いたDLC膜の繰返し押付け試験機の開発2020

Author(s)

Organizer

Data Source

[Presentation] 超音波振動子を用いたギガサイクル繰返し押付け試験機によるDLC膜の損傷評価 -損傷形態に及ぼす成膜条件の影響-2020

Author(s)

Organizer

Data Source

[Presentation] 超音波振動子を用いたギガサイクル繰返し押付け試験によるDLC 膜の損傷評価2020

Author(s)

Organizer

Data Source

[Presentation] Relationships between Raman parameters obtained from cyclic indentation impressions on DLC coatings2019

Author(s)

Organizer

Data Source

[Presentation] Conductive ink print on PA66 gear for manufacturing condition monitoring sensors2018

Author(s)

Organizer

NAKAMURA MORIMASA 中村守正

Nakamura Morimasa 中村守正

[Presentation] 繰返し押付け試験によるDLC膜の強度評価押付け速度の影響2017