TAKESUE Shogo 武末翔吾

… Alternative Names

Takesue Shogo 武末翔吾

Less

Researcher Number	00846058
Other IDs
Affiliation (Current)	2025: 京都工芸繊維大学, 機械工学系, 准教授
Affiliation (based on the past Project Information) *help	2024: 京都工芸繊維大学, 機械工学系, 助教 2019 – 2022: 京都工芸繊維大学, 機械工学系, 助教
Review Section/Research Field	Principal Investigator Basic Section 18010:Mechanics of materials and materials-related Except Principal Investigator Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 熱処理 / 疲労 / 積層造形 / 摩擦摩耗 / チタン / 窒化 / 微粒子ピーニング / 高周波誘導加熱 / 表面改質 Except Principal Investigator 表面処理 … More / 高周波加熱 / 積層造形 / 耐摩耗性 / SLM / 三次元プリンター / 摩擦摩耗特性 / 疲労強度 / 高速酸窒化 / 高周波誘導加熱 / チタン合金 / LPBF / 三次元プリンタ Less

金属積層造形材の疲労強度最大化のための造形条件最適化および造形後処理の開発Principal Investigator
- Principal Investigator
  
  武末翔吾
- Project Period (FY)
  2024 – 2026
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyoto Institute of Technology
Development of super rapid nitriding technique using induction heating and fine particle peeningPrincipal Investigator
- Principal Investigator
  
  Takesue Shogo
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyoto Institute of Technology
Improvement in performance of titanium alloy produced by 3D printer using advanced rapid high-temperature heat treatment
- Principal Investigator
  
  Morita Tatsuro
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyoto Institute of Technology

All 2022 2021 2020 2019

All Journal Article Presentation

[Journal Article] Short-Time Heat Treatment for Ti–6Al–4V Alloy Produced by Selective Laser Melting2022
- Author(s)
  Tatsuro Morita, Yohei Oka, Seiichiro Tsutsumi, Shogo Takesue, Norio Higuchi, Hitoshi Sakai
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 63 Issue: 6 Pages: 854-863
- DOI
  10.2320/matertrans.MT-M2022018
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2022-06-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02027, KAKENHI-PROJECT-21H01545
[Journal Article] Formation of Fe–Al Intermetallic Compound Layer by AIH-FPP and its Effect on Tribological Properties of Stainless Steel2021
- Author(s)
  Shogo Takesue, Yoshitaka Misaka, Jun Komotori
- Journal Title
  
  ISIJ International
  
  Volume: 61 Issue: 6 Pages: 1946-1954
- DOI
  10.2355/isijinternational.ISIJINT-2020-753
- NAID
  130008053340
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2021-06-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14609
[Journal Article] Combined Effect of Gas Blow Induction Heating Nitriding and Post-Treatment with Fine Particle Peening on Surface Properties and Wear Resistance of Titanium Alloy2021
- Author(s)
  Shogo Takesue, Shoichi Kikuchi, Yoshitaka Misaka, Tatsuro Morita, Jun Komotori
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 62 Issue: 10 Pages: 1502-1509
- DOI
  10.2320/matertrans.Z-M2021845
- NAID
  130008091586
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2021-10-01
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K14609
[Journal Article] Rapid Oxynitriding of Ti–6Al–4V Alloy by Induction Heating in Air2021
- Author(s)
  K. Tamura, S. Takesue, T. Morita, E. Marin, J. Komotori, Y. Misaka, M. Kumagai
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 62 Issue: 1 Pages: 111-117
- DOI
  10.2320/matertrans.Z-M2020858
- NAID
  130007960224
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2021-01-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02027
[Journal Article] 窒素雰囲気下での高周波誘導加熱によるチタン合金の極短時間窒化2020
- Author(s)
  武末翔吾，塚原真宏，三阪佳孝，小茂鳥潤
- Journal Title
  
  熱処理
  
  Volume: 60 Pages: 233-238
- NAID
  40022459147
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K14609
[Journal Article] Rapid nitriding mechanism of titanium alloy by gas blow induction heating2020
- Author(s)
  Shogo Takesue, Shoichi Kikuchi, Yoshitaka Misaka, Tatsuro Morita, Jun Komotori
- Journal Title
  
  Surface and Coatings Technology
  
  Volume: 399 Pages: 126160-126160
- DOI
  10.1016/j.surfcoat.2020.126160
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K14609, KAKENHI-PROJECT-19H02027
[Presentation] 高温加熱によるチタンへの高速元素拡散を利用した表面改質法の開発2022
- Author(s)
  武末翔吾，森田辰郎，小茂鳥潤
- Organizer
  第2回日本チタン学会講演大会
- Data Source
  KAKENHI-PROJECT-20K14609
[Presentation] 窒素雰囲気したでのIHと微粒子ピーニングによるSCM415の耐食性の改善2022
- Author(s)
  辻井優成，洌崎郁，武末翔吾，森田辰郎，小茂鳥潤
- Organizer
  砥粒加工学会先進テクノフェア（ATF2022）卒業研究発表会
- Data Source
  KAKENHI-PROJECT-20K14609
[Presentation] 高周波誘導加熱と微粒子ピーニングによるチタン合金の高速酸化および耐摩耗性改善2022
- Author(s)
  辻井優成，武末翔吾，森田辰郎，小茂鳥潤
- Organizer
  日本材料学会関西支部第17回若手シンポジウム
- Data Source
  KAKENHI-PROJECT-20K14609
[Presentation] 窒素雰囲気下でのIHと微粒子ピーニングによるSCM415の耐摩耗性の改善2021
- Author(s)
  洌崎郁，武末翔吾，森田辰郎，小茂鳥潤
- Organizer
  日本材料学会材料シンポジウム若手学生研究発表会
- Data Source
  KAKENHI-PROJECT-20K14609
[Presentation] 高周波誘導加熱での高速酸窒化処理およびFPB処理によるTi-6Al-4V合金積層造形材の機能性向上2021
- Author(s)
  奥野由雅，森田辰郎，武末翔吾，酒井仁史，樋口官男，小茂鳥潤，三阪佳孝，熊谷正夫
- Organizer
  日本材料学会第7回材料week若手学生研究発表会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] AIH-FPP処理によるFe-Al金属間化合物層の創成とステンレス鋼の耐摩耗性に及ぼすその効果2020
- Author(s)
  武末翔吾，齋藤周也，三阪佳孝，小茂鳥潤
- Organizer
  日本鉄鋼協会第180回秋季講演大会
- Data Source
  KAKENHI-PROJECT-20K14609
[Presentation] 雰囲気制御下でのIHと微粒子衝突処理を併用したSCM415表面での高硬度被膜の創成2020
- Author(s)
  洌崎郁，武末翔吾，森田辰郎，小茂鳥潤
- Organizer
  日本材料学会関西支部第15回若手シンポジウム
- Data Source
  KAKENHI-PROJECT-20K14609
[Presentation] Ti-6Al-4V合金積層造形材の大気中での高周波誘導加熱による高速酸窒化処理（優秀講演発表賞受賞）2019
- Author(s)
  奥野由雅，田村和暉，森田辰郎，武末翔吾，小茂鳥潤
- Organizer
  日本材料学会関東支部理事会主催学生研究交流会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] 大気中での高周波誘導加熱によるTi-6Al-4V合金積層造形材の高速酸窒化処理2019
- Author(s)
  田村和暉，森田辰郎，武末翔吾，酒井仁史，樋口官男，小茂鳥潤，三阪佳孝，熊谷正夫
- Organizer
  日本金属学会2019年秋期（第165回）講演大会
- Data Source
  KAKENHI-PROJECT-19H02027
[Presentation] 大気中での高周波誘導加熱によるTi-6Al-4V合金の高速酸窒化処理2019
- Author(s)
  田村和暉，森田辰郎，武末翔吾，小茂鳥潤，三阪佳孝，熊谷正夫
- Organizer
  日本材料学会第5回材料WEEK若手学生研究発表会
- Data Source
  KAKENHI-PROJECT-19H02027

1. Morita Tatsuro (90239658)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
2. 小茂鳥潤 (30225586)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results

TAKESUE Shogo 武末 翔吾

Takesue Shogo 武末 翔吾

Research Projects

Research Products

Co-Researchers

金属積層造形材の疲労強度最大化のための造形条件最適化および造形後処理の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of super rapid nitriding technique using induction heating and fine particle peeningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Improvement in performance of titanium alloy produced by 3D printer using advanced rapid high-temperature heat treatment

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Journal Article] Short-Time Heat Treatment for Ti–6Al–4V Alloy Produced by Selective Laser Melting2022

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Formation of Fe–Al Intermetallic Compound Layer by AIH-FPP and its Effect on Tribological Properties of Stainless Steel2021

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Combined Effect of Gas Blow Induction Heating Nitriding and Post-Treatment with Fine Particle Peening on Surface Properties and Wear Resistance of Titanium Alloy2021

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Rapid Oxynitriding of Ti–6Al–4V Alloy by Induction Heating in Air2021

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] 窒素雰囲気下での高周波誘導加熱によるチタン合金の極短時間窒化2020

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Rapid nitriding mechanism of titanium alloy by gas blow induction heating2020

Author(s)

Journal Title

DOI

Data Source

[Presentation] 高温加熱によるチタンへの高速元素拡散を利用した表面改質法の開発2022

Author(s)

Organizer

Data Source

[Presentation] 窒素雰囲気したでのIHと微粒子ピーニングによるSCM415の耐食性の改善2022

Author(s)

Organizer

Data Source

[Presentation] 高周波誘導加熱と微粒子ピーニングによるチタン合金の高速酸化および耐摩耗性改善2022

Author(s)

Organizer

Data Source

TAKESUE Shogo 武末翔吾

Takesue Shogo 武末翔吾