KUBO Aizoh 久保愛三

Researcher Number	10027899
Other IDs
External Links
Affiliation (based on the past Project Information) *help	1995 – 2006: Kyoto University, Graduate School of Engineering, Professor, 工学研究科, 教授 1994: Kyoto Univ., Dept.Precision Engnrg, Professor, 工学部, 教授 1989 – 1993: 京都大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator 設計工学・機械要素・トライボロジー / 機械要素 / Design engineering/Machine functional elements/Tribology Except Principal Investigator 設計工学・機械要素・トライボロジー / 機械要素
Keywords	Principal Investigator 歯車 / Gear / 精度検定 / Laser / レーザ / 損傷予知 / 歯当たり / Gear quality / CBN Grinding / Grinding … More / Hard Finishing / Involute artifact / Virtual machine / Accuracy of tooth flank from / Accuracy inspection / インボリュートアーティファクト / バーチャルマシン / 歯形精度 / Repeatability / Measuring Error / Heterodyne Interferometry / Non-Contacting Measuring Method / 3-Dimensional Curved Surface / Calibrating Method / Second Master / 歯車精度保証 / 曲面形状精度 / レーザ測定 / 2次原器 / マスターアーティファクト / 精度基準原器 / トレーサビリティー / インボリュート形状 / 測定誤差 / 再現性 / 精度 / ヘテロダイン干渉法 / インボリュート曲線 / 2次マスター / Contaminant / Damage / Strength / Reliability / Micro machine / 歯面強度 / マイクロ歯車 / 損傷モード / 歯車精度 / コンタミナント / 損傷 / 強度 / 信頼性 / マイクロマシン / Tooth Flank Form / CCD Image Sensor / Digital Data / Data Processing / Phase / Computer Holographic Measurement / Interferometry / 形状誤差 / 干渉計 / 精度測定 / 形状偏差 / 位相シフト法 / 位相差 / 歯車歯面形状 / CCDイメージセンサ / デジタルデータ / 画像処理 / 位相 / コンピュータホログラフィック測定 / 斜入射干渉法 / Failure prediction / Designing method / Pattern recognition / Tooth contact pattern / Gears / 設計法 / パターン認識 / Failure Prediction / Transmission Error / Simulation / Tooth Contact pattern / Bevel Gear / Hypoid Gear / シミュレ-ション / シミュレーション / 伝達誤差 / かさ歯車 / ハイポイドギヤ / Gear Quality / gear quality / CBN grinding / grinding / 計測 / 校正 / 原器 / 超精密計測 … More Except Principal Investigator 位相 / 斜入射干渉法 / Laser / レーザ / Phase / Interferometry / 作用平面 / 歯車 / フリンジスキャン法 / 歯面形状偏差 / CCD Image Sensor / Digital Data / Data Processing / Phase Concatenation / Shaving Cutter / CCDイメージセンサ / シェービングカッタ / CCDイメージセンサー / デジタルデータ / 画像処理 / 位相接続 / Form deviation / 形状偏差 / 位相シフト法 / Gear / Hologram / 歯面誤差 / 歯車精度 / ホログラム / Nick / Distribution of Intensity / large Incident Angle / Principle of Huygens-Fresnel / ホログラフィ / 強度分布 / 強度 / ホイエインス-フレネルの原理 / 打痕 / 高度分布 / ホイエンス-フレネルの原理 / Phase Shifting Method / ベストフィット法 / 光学系設定誤差 / 干渉縞像 / ねじれ角 / はすば歯車 / 歯車形工具 / 非接触測定 / シェービングカッター / Measurement / Phase shift method / Phase difference / Involute gear / 干渉計 / 形状誤差 / インボリュート曲線 / 干渉法 / インボリュート曲面 / 計測 / 精度測定 / 位相差 / Plane of action / Tooth form deviation / Gear accuracy / Phase stepping method / フリンジスチヤン法 / 君車精度 / 千渉計 / レーザー / 光計測 / Plane of Action / Gear Accuracy / Fringe Scanning Method / Laser Horography / レ-ザホログラフィ Less

Evaluation method of gear-measuring instrument using artifact with nano-meter accuracyPrincipal Investigator
- Principal Investigator
  
  KOMORI Masaharu, NONAKA Tetsuya, 久保愛三
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Kyoto University
Inspection system of gear measuring machine by virtual gear checkerPrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Kyoto University
Development of High-Efficiently Calibrating Method of the Second Master with 3-Dimensional Curved SurfacePrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Rapid Detection of Tooth Form Deviation of Cylindrical Involute Gear by Laser Holography
- Principal Investigator
  
  FUJIO Hiroshige
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Study on Measurement of Tooth Fom Deviation of Helical Gear by Laser Interferometry
- Principal Investigator
  
  FUJIO Hiroshige
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Measurement of Tooth Fom Deviation of Gear-Shaped Tools by Laser Interferometry
- Principal Investigator
  
  FUJIO Hiroshige
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Failure mode analysis of micro machine gears and the limitation of micronizationPrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Computer Holographic Measurement of Machine Parts by Laser InterferometryPrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  1994 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Contact Free Measurement of Tooth Form Deviation (of Involute Gear Using Laser Interferometry)
- Principal Investigator
  
  FUJIO Hiroshige
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Prediction of Gear Performance based on Recognition of Tooth Contact PatternPrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  KYOTO UNIVERSITY
Contact Free Measurement of Tooth Form Deviation of Involute Gear Using Laser Interferometry
- Principal Investigator
  
  FUJIO Hiroshige
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  KYOTO UNIVERSITY
Fundamental research on performance and failure prediction for hypoid/bevel gearsPrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  KYOTO UNIVERSITY
Contact Free Measurement of Three-Dimensional Curved Surface Using Laser Holographic Interferometry
- Principal Investigator
  
  FUJIO Hiroshige
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Kyoto University
Generating CBN Grinding of 3 Dimensional Curved Surface of Machine PartsPrincipal Investigator
- Principal Investigator
  
  KUBO Aizoh
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Kyoto University

All 2009 2006 2005

All Journal Article

[Journal Article] Evaluation method of lead measurement accuracy of gears using a wedge artefact2009
- Author(s)
  Masaharu Komori, Fumi Takeoka, Aizoh Kubo, Kazuhiko Okamoto, Sonko Osawa, Osamu Sato, and Toshiyuki Takatsuji
- Journal Title
  
  Measurement Science and Technology Volume 20
  
  Pages: 1-13
- NAID
  120005753815
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360077
[Journal Article] Evaluation method of lead measurement accuracy of gearsusing a wedge artefact2009
- Author(s)
  Masaharu Komori, Fumi Takeoka, Aizoh Kubo, Kazuhiko Okamoto, Sonko Osawa, Osamu Sato, Toshiyuki Takatsuji
- Journal Title
  
  Measurement Science and Technology Volume 20
  
  Pages: 1-13
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360077
[Journal Article] バーチャルギヤチェッカー(VGC)による歯形測定機校正法2006
- Author(s)
  小森雅晴, 岡本和彦, 高橋正樹, 竹岡郁, 久保愛三
- Journal Title
  
  日本機械学会関西支部第81期定時総会講演会講演論文集
  
  Pages: 13-15
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206018
[Journal Article] Calibration method of gear checker by virtual gear checker (VGC)2006
- Author(s)
  Masaharu KOMORI, Kazuhiko OKAMOTO, Masaki TAKAHASHI, Aizoh KUBO
- Journal Title
  
  Proceedings of the Japan society of mechanical engineers Kansai
  
  Pages: 13-15
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206018
[Journal Article] 原子間力プローブ式形状測定機を用いた軸状機械部品の評価法2005
- Author(s)
  竹岡郁, 小森雅晴, 久保愛三, 狩谷悠史, 伊藤雄大, 八田健一郎, 竹内博之, 吉住恵一, 高辻利之, 大澤尊光
- Journal Title
  
  2005年度精密工学会秋季大会講演論文集 (CD-ROM)
- NAID
  130004656984
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206018
[Journal Article] Evaluating method of machine parts with axis by atomic force probe measuring machine2005
- Author(s)
  Fumi TAKEOKA, Masaharu KOMORI, Aizoh KUBO, Yuji KARIYA, Takehiro ITO, Kenichiro HATTA, Hiroyuki TAKEUCHI, Keiichi YOSHIZUMI, Toshiyuki TAKATSUJI, Sonko OSAWA
- Journal Title
  
  Proceedings of the Japan society for precision engineering 2005 Spring (CD-ROM)
- NAID
  130004656984
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15206018

1. FUJIO Hiroshige (90026097)

# of Collaborated Projects: 12 results

# of Collaborated Products: 0 results
2. NONAKA Tetsuya (00180761)

# of Collaborated Projects: 9 results

# of Collaborated Products: 0 results
3. KOMORI Masaharu (90335191)

# of Collaborated Projects: 3 results

# of Collaborated Products: 6 results
4. TAKATSUJI Toshiyuki (20357362)

# of Collaborated Projects: 2 results

# of Collaborated Products: 2 results
5. YABE Hiroshi (30025936)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. KAKINO Yoshiaki (00026204)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 吉住恵一

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
8. 佐藤孝

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

KUBO Aizoh 久保 愛三

Research Projects

Research Products

Co-Researchers

Evaluation method of gear-measuring instrument using artifact with nano-meter accuracyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Inspection system of gear measuring machine by virtual gear checkerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of High-Efficiently Calibrating Method of the Second Master with 3-Dimensional Curved SurfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Rapid Detection of Tooth Form Deviation of Cylindrical Involute Gear by Laser Holography

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Measurement of Tooth Fom Deviation of Helical Gear by Laser Interferometry

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Measurement of Tooth Fom Deviation of Gear-Shaped Tools by Laser Interferometry

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Failure mode analysis of micro machine gears and the limitation of micronizationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Computer Holographic Measurement of Machine Parts by Laser InterferometryPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Contact Free Measurement of Tooth Form Deviation (of Involute Gear Using Laser Interferometry)

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Prediction of Gear Performance based on Recognition of Tooth Contact PatternPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Contact Free Measurement of Tooth Form Deviation of Involute Gear Using Laser Interferometry

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fundamental research on performance and failure prediction for hypoid/bevel gearsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Contact Free Measurement of Three-Dimensional Curved Surface Using Laser Holographic Interferometry

Principal Investigator

Project Period (FY)

Research Category

KUBO Aizoh 久保愛三