• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

MANABE Kenーichi  真鍋 健一

ORCIDConnect your ORCID iD *help
… Alternative Names

真鍋 健一  マナベ ケンイチ

MANABE Ken-ichi  真鍋 健一

MANABE Kenichi  真鍋 健一

Less
Researcher Number 10145667
Other IDs
External Links
Affiliation (Current) 2025: 東京都立大学, システムデザイン研究科, 客員教授
Affiliation (based on the past Project Information) *help 2022 – 2023: 東京都立大学, システムデザイン研究科, 客員教授
2020: 東京都立大学, システムデザイン研究科, 客員教授
2018 – 2019: 首都大学東京, システムデザイン研究科, 客員教授
2017: 首都大学東京, 理工学研究科, 客員教授
2008 – 2016: 首都大学東京, 理工学研究科, 教授 … More
2010 – 2013: 首都大学東京, 大学院・理工学研究科, 教授
2007 – 2008: Tokyo Metropolitan University, Graduate School of Science and Engineering, Professor
2006: 首都大学東京, 大学院理工学研究科, 教授
2005: 首都大学東京, 都市教養学部, 教授
2002 – 2004: 東京都立大学, 工学研究科, 教授
2002: Tokyo Metropolitan Univ., Dept.Mech.Eng., Prof., 大学院・工学研究科, 教授
2000 – 2001: 東京都立大学, 大学院・工学研究科, 助教授
1999 – 2000: 東京都立大学, 工学研究科, 助教授
1997: Tokyo Metropolitan University Graduated School, Mechanical Engineering, Associat, 大学院・工学研究科, 助教授
1997: 東京都立大学, 工学研究科, 助教授
1989 – 1997: 東京都立大学, 工学部, 助教授
1986 – 1987: 東京都立大学, 工学部, 助教授 Less
Review Section/Research Field
Principal Investigator
Material processing/treatments / Basic Section 26050:Material processing and microstructure control-related / Material processing/Microstructural control engineering / Material processing/Microstructural control engineering / 材料加工・処理 / 機械工作・生産工学 / 金属加工(含鋳造) / Material processing/treatments
Except Principal Investigator
金属加工(含鋳造) / Material processing/treatments / Material processing/treatments / Structural/Functional materials / 機械材料工学
Keywords
Principal Investigator
マイクロチューブ / FEM / 超塑性 / 結晶粒微細化 / 寸法効果 / 組織制御 / ダイレス引抜き / 高液圧成形 / 材料流動特性 / マイクロトライボ特性 … More / マイクロ金属加工 / 成形不良 / マイクロ成形性 / チューブハイドロフォーミング / Deep Drawing / 深絞り / 適応制御 / 逐次成形 / ねじり / 加工条件 / 変形機構 / hcp / Mg合金 / 結晶塑性有限要素法 / マイクロECAP / 圧延スケジュール / 箔表面性状 / マイクロトライボロジー / 非対称圧延 / 極薄ストリップ / マイクロ圧延 / 長尺マイクロ管 / 不均質有限要素解析 / その場観察 / 液圧成形 / 長尺微細管 / トライボ特性 / 超高圧成形 / マイクロトライボ機構 / 枝管成形 / 成形メカニズム / 長尺マイクロチューブ / 変形挙動 / 金型変形 / マイクロチューブフォーミング / 結晶粒径 / 摩擦軽減 / 成形限界 / プロセスウインドウ / 潤滑 / 超高圧繰返し負荷 / 摩擦抵抗 / 型開き・型閉じ変形 / 張出し成形高さ / 枝管張出し成形 / 高圧繰り返し負荷 / 金型変形連成FEM解析 / マイクロチューブハイドロフォーミング / 材料流動促進 / 高圧繰返し負荷 / 型開き挙動 / 金型変形連成解析 / マイクロ塑性加工 / Ontimization / Forming Process Path / Finite Element Simulation / T-joint Forming / Fuzzy Inference / Intelligent Control / Micro Contact Sensor / Tube Hvdroformin / 最適化 / 成形プロセス経路 / T成形 / ファジィアルゴリズム / 知的制御 / マイクロ接触センサ / Product Quality / Drawing Force / Low vibration frequency / Friction Force / Blank holder Force / No Lubricant / Vibrating Blank Holder / 低粘度油 / 潤滑特性 / 製品品質 / 加工力 / 低周波 / 無潤滑 / しわ抑え力 / 摩擦力 / 振動負荷 / Identification of Blank Material Properties / Wall Thickness Distribution / Flange Wrinkles / Variable Punch Speed / Variable Blank Holding Force / Adaptive Control / Sheet Forming / 深絞り限界 / 適応制抑 / 材料特性の同定 / 肉厚分布 / フランジしわ / 可変パンチ速度 / 変圧しわ抑え / 板材成形 / 逐次変形 / 超深絞り / 再絞り / 材料流動制御 / プレスモーション / 超高圧 / マイクロ超深絞り / 対向液圧深絞り / マイクロフォーミング / 酸化膜 / 加工熱処理 / 機械的性質 / 多パス / 外径変動 / 酸化 / 熱援用引抜き / 外径精度 / 表面あれ / マルチパス / 引抜き限界 / 熱援用加工 / マグネシウム合金管 / 繰返し塑性変形 / 回転曲げ / 強変形 / 金属管 / 伝熱 / 幾何学的相似変形原理 / 集合管 / 異形管 / AFB法 / ECAP法 / ARB法 / 有限要素法 / m値 / 局部加熱 … More
Except Principal Investigator
FRM / FEMシミュレーション / Database / データベース / Superplasticity / 曲げ加工 / 粉末冶金 / MMC / 複合材料 / 塑性加工 / 超塑性 / プレス加工 / ひずみ速度依存性 / 軽量化 / AI制御 / アルミニウム合金 / 精密造形プロセス / Aluminum / High Temperature Strength / Tensile Strength / Diffusion bonding / Fiber-reinforcing / Compacting / Composite / 炭化けい素繊維 / アルミニウム / 高温強度 / 引張強度 / 拡散接合 / 繊維強化 / Sensor fusion / Intelligent sensing system / Bending process / stress distribution / micro semiconductor strain gauge / die-embedded sensing system / 角度測定 / 金型内臓 / マイクロセンサ / 知能機械 / 先端機能デバイス / 精密部品加工 / 計測工学 / 材料加工・処理 / Precision Bending / Simulation / Micro instrumentation / Nano-Indentation / Precision measurement system / Decrease of Elastic Modulus / Prediction on Springback / 適応フィルター / 応力測定 / マイクロ材料物性 / 画像処理 / スプリングバック評価 / 加工精度 / 微視的測定評価 / ヤング率測定 / 高精度曲げ / シミュレーション / マイクロ測定 / ナノインデンテーション / 精密計測システム / 弾性係数の低下 / スプリングバック予測 / change in sectional shape / 4 points bending / artifical bamboo / reinforcing nodes / FRP pipe / 節のある複合材料円筒 / 天然竹の機械的特性 / 熱可塑性樹脂の利用 / 熱可塑性マトリックス / ひずみエネルギー論 / フィラメントワインディング成形 / 人工竹の成形 / 断面変形 / 断面菱形 / 4点曲げ / 人工竹 / 補強節 / CFRPパイプ / Compressive Working / Plastic Working / Wood Working / Strength of Wood / Lumber / Compressud Wood / Woody Material / 木材の強度 / 木材加工 / 圧縮加工 / 圧密木材 / 木質材料 / 木材 / Intelligent tool system / Material for automotive body / Formability / Press forming / AI control system / Aluminum alloy / 知的金型 / 潤滑 / 自動車車体用材料 / 知的制御 / 成形温度依存性 / 自動車ボディー用材料 / 成形性 / プレス成形 / 知的工具 / 知的制御システム / High Performance Materials / Powder Metallurgy / Composites / Deformation Processing / 粉未冶金 / 深絞り / 機械性材料 / 機能性材料 / 粉末治金 / ボディーシート / 深絞り加工 / 高精度マイクロ成形 / マイクロ加熱システム / 表面矯正 / 振動援用 / 低荷重精密鍛造 / インプロセス矯正 / 通電加熱 / 超音波振動 / 高密度エネルギー援用 / マイクロ成形 / トライボロジー / 精密計測 / 表面処理 / マイクロ金型 / 最適形状設計 / 超塑性成形加工 / 薄肉殻 / 高硬化樹脂 / 高強度繊維 / 金星探査気球 / AE計測 / 耐圧試験 / 炭素繊維 / チタン合金 / フィラメントワインディング / 超塑性加工 / 軽量圧力容器 Less
  • Research Projects

    (23 results)
  • Research Products

    (126 results)
  • Co-Researchers

    (24 People)
  •  微細管の高液圧成形における材料流動およびマイクロトライボ現象とその寸法効果解明Principal Investigator

    • Principal Investigator
      真鍋 健一
    • Project Period (FY)
      2022 – 2024
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 26050:Material processing and microstructure control-related
    • Research Institution
      Tokyo Metropolitan University
  •  Mechanics, tribological characterization and Scale effect in ultra-high pressure hydroforming of micro-tubesPrincipal Investigator

    • Principal Investigator
      Ken-ichi Manabe
    • Project Period (FY)
      2018 – 2020
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 26050:Material processing and microstructure control-related
    • Research Institution
      Tokyo Metropolitan University
  •  Development of Microtube Hydroforming Process Utilizing Incrementally Applied Ultra High PressurePrincipal Investigator

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Mg合金の革新マイクロ製造技術開発とそのマイクロ成形への応用Principal Investigator

    • Principal Investigator
      真鍋 健一
    • Project Period (FY)
      2016
    • Research Category
      Grant-in-Aid for JSPS Fellows
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Development of warm micro ultra deep drawing process based on blank material flow control with press motion and ultra high fluid pressurePrincipal Investigator

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      2014 – 2015
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  極薄ストリップのマイクロ圧延における摩擦潤滑メカニクスPrincipal Investigator

    • Principal Investigator
      真鍋 健一
    • Project Period (FY)
      2014
    • Research Category
      Grant-in-Aid for JSPS Fellows
    • Research Field
      材料加工・処理
    • Research Institution
      Tokyo Metropolitan University
  •  Fabrication of high grade medical microtubes with microstructure control in superplastic dieless drawing processPrincipal Investigator

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of high-energy assisted processes for precise micro forming

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of Novel Cyclic Rotating Bending Process for Control of Microstructure and Grain Refinement of Metal TubesPrincipal Investigator

    • Principal Investigator
      MANABE Kenichi
    • Project Period (FY)
      2011 – 2012
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Fabrication of functional surface of micro dies and development of equipment for evaluation of its tribological characteristics

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of creation method of extra fine strange appearance set microtube using minute crystal superplasticityPrincipal Investigator

    • Principal Investigator
      真鍋 健一
    • Project Period (FY)
      2006 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of die-embedded micro sensing system for sensing and control system in precise metal forming processes

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2005 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Intelligent Tube Hydroforming Process with Micro Contact SensorsPrincipal Investigator

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  軽量合金組織の微細化による超塑性発現を利用した極細マイクロチューブの製造法開発Principal Investigator

    • Principal Investigator
      真鍋 健一
    • Project Period (FY)
      2002 – 2003
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Development of Precision Springback Measurement and Bending System of Sheet Metal

    • Principal Investigator
      YANG Ming
    • Project Period (FY)
      2000 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Tokyo Metropolitan University
  •  Adaptive Blank Holder Control Deep-Drawing Process Using Vibration Tooling Without LubricantPrincipal Investigator

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      TOKYO METROPOLITAN UNIVERSITY
  •  Compressive Plastic Working of Woody Materials

    • Principal Investigator
      NISHIMURA Hisashi
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      TOKYO METROPOLITAN UNIVERSITY
  •  Design and development of "artificial bamboo" by advanced composite materials

    • Principal Investigator
      KAWAHARA Masanori
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Structural/Functional materials
    • Research Institution
      TOKYO METROPOLITAN UNIVERSITY
  •  先進複合材料による超軽量圧力容器の開発研究

    • Principal Investigator
      KAWAHARA Masanori
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      機械材料工学
    • Research Institution
      Tokyo Metropolitan University
  •  Development of High Performance FRM using Superplasticity

    • Principal Investigator
      NISHIMURA Hisashi
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Tokyo Metropolitan University
  •  AI control system for press forming of of Aluminum alloy sheet for automotive body

    • Principal Investigator
      NISHINUMA Hisashi
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Tokyo Metropolitan University
  •  Development of Adaptive Control of Deep Drawing ProcessPrincipal Investigator

    • Principal Investigator
      MANABE Ken-ichi
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B).
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Tokyo Metropolitan University
  •  Fabrication of Fiber Reinforced Metal using Superplastic Metal Powder as Matrix

    • Principal Investigator
      NISHIMURA Hisashi
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Tokyo Metropolitan University

All 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 Other

All Journal Article Presentation

  • [Journal Article] Material Deformation Behavior in T-Shape Hydroforming of Metal Microtubes2020

    • Author(s)
      Hajime Yasui, Shoichiro Yoshihara, Shigeki Mori, Kazuo Tada, Ken-ichi Manabe
    • Journal Title

      Metals

      Volume: 10 Issue: 2 Pages: 199-199

    • DOI

      10.3390/met10020199

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Journal Article] 金属管のマイクロ塑性加工2019

    • Author(s)
      真鍋健一
    • Journal Title

      ぷらすとす

      Volume: 2 Pages: 192-197

    • NAID

      130007652396

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Journal Article] マイクロチューブハイドロフォーミングシステムの開発と中空部材の十字成形2017

    • Author(s)
      森茂樹、佐藤英樹、板井謙太、真鍋健一
    • Journal Title

      塑性と加工

      Volume: 58 Pages: 72-77

    • NAID

      130005296344

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Journal Article] Factors influencing the forming characteristics in micro tube hydroforming by ultra high-forming pressure2017

    • Author(s)
      Ken-ichManabe, Hideki Sato, Kenta Itai, Marko Vilotic, Kazuo Tada
    • Journal Title

      Procedia Engineering

      Volume: 207 Pages: 2334-2339

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Journal Article] Tribological behavior in micro-sheet hydroforming2016

    • Author(s)
      Hideki Sato, Ken-ichi Manabe, Dongbin Wei, Zhengyi Jiang, Sergei Alexandrov
    • Journal Title

      Tribology International

      Volume: 97 Pages: 302-312

    • DOI

      10.1016/j.triboint.2016.01.041

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15J06110, KAKENHI-PROJECT-26630369
  • [Journal Article] マイクロ対向液圧深絞りにおける変形挙動に及ぼす相対工具寸法の効果2016

    • Author(s)
      佐藤英樹、真鍋健一、Dongbin Wei, Zhengyi Jiang
    • Journal Title

      塑性と加工

      Volume: 57

    • NAID

      130005165593

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Journal Article] Micro Sheet Hydroforming Process of Ultra-Thin Pure Titanium Foil2015

    • Author(s)
      Hideki Sato, Ken-ichi Manabe, Dongbin Wei, Zhengyi Jiang and Daiki Kondo
    • Journal Title

      Key Engineering Materials

      Volume: 626 Pages: 397-401

    • DOI

      10.4028/www.scientific.net/kem.626.397

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Journal Article] Development of Rotary Laser Dieless Drawing Apparatus for Metal Microtubes2015

    • Author(s)
      Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa and Ken-ichi Manabe
    • Journal Title

      Key Engineering Materials

      Volume: 626 Pages: 372-276

    • DOI

      10.4028/www.scientific.net/kem.626.372

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360310, KAKENHI-PROJECT-24560888
  • [Journal Article] Potential of fluid pressure use for achieving high formability in micro sheet forming process2014

    • Author(s)
      Hideki Sato, Ken-ichi Manabe, Dongbin Wei, Zhengyi Jiang, and Daiki Kondo
    • Journal Title

      AIP Conference Proceedings

      Volume: 1618 Pages: 327-330

    • DOI

      10.1063/1.4897740

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Journal Article] Formability of Micro Sheet Hydroforming of Ultra-fine Grained Stainless Steel2014

    • Author(s)
      Hideki Sato, Ken-ichi Manabe, Daiki Kondo, Dongbin Wei, Zhengyi Jiang
    • Journal Title

      Procedia Engineering

      Volume: 81 Pages: 1416-1468

    • DOI

      10.1016/j.proeng.2014.10.174

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Journal Article] Fabrication of noncircular multicore microtubes by superplastic dieless drawing process2014

    • Author(s)
      T. Furushima, A. Shirasaki, K. Manabe
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 214 Issue: 1 Pages: 29-35

    • DOI

      10.1016/j.jmatprotec.2013.07.005

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360310, KAKENHI-PROJECT-24560888
  • [Journal Article] Deformation Profile in Rotary Laser Dieless Drawing Process for Metal Microtubes2014

    • Author(s)
      Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa, Ken-ichi Manabe
    • Journal Title

      Procedia Engineering

      Volume: 81 Pages: 700-705

    • DOI

      10.1016/j.proeng.2014.10.063

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Journal Article] Deformation characterization of micro rolling for stainless steel foil2014

    • Author(s)
      H.B.Xie, K.Manabe, T.Furushima, K. Tada and Z,Y.Jiang
    • Journal Title

      Proceedia Engineering

      Volume: 81 Pages: 179-184

    • DOI

      10.1016/j.proeng.2014.09.147

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-14F02770
  • [Journal Article] Enhancement of Dimensional Accuracy of Dieless Tube-drawing using Vision-based Fuzzy Control2013

    • Author(s)
      S. Supriadi and K. Manabe
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 213 Issue: 6 Pages: 905-912

    • DOI

      10.1016/j.jmatprotec.2012.12.011

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Journal Article] Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube2013

    • Author(s)
      Z.C.Zhang, K. Manabe, T. Furushima and K. Tada
    • Journal Title

      Advanced Materials Research

      Volume: 652-654 Pages: 1956-1960

    • DOI

      10.4028/www.scientific.net/amr.652-654.1956

    • Data Source
      KAKENHI-PROJECT-23656468
  • [Journal Article] Real-Time Process Control System of Dieless Tube Drawing with an Image Processing Approach2012

    • Author(s)
      S. Supriadi, T. Furushima,_K. Manabe
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 53 Issue: 5 Pages: 862-869

    • DOI

      10.2320/matertrans.MF201118

    • NAID

      130004824867

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360310, KAKENHI-PROJECT-24560888
  • [Journal Article] Workability of AZ31 Magnesium Alloy Tubes in Dieless Drawing Process2012

    • Author(s)
      T. Furushima, K. Manabe
    • Journal Title

      Steel Research International

      Pages: 851-854

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Journal Article] Scale Dependence of Dry Friction in Micro Sheet Metal Forming2011

    • Author(s)
      T.Shimizu, S.Iwaoka, M.Yang, K.Manabe
    • Journal Title

      Steel research international

      Volume: (2011 Special Edition) Pages: 979-984

    • URL

      http://www.wiley-vch.de/vch/journals/2520/SRI_files/ICTP_Band_1/Special_Topics/979-984_Sca.pdf

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Journal Article] Deformation Behavior of Ultra-Thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T. Shimizu, K. Manabe, M. Yang
    • Journal Title

      Key Engineering Materials Vol.443

      Pages: 110-115

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Deformation Behavior of Ultra-Thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang
    • Journal Title

      Key Engineering Materials

      Volume: Vol.443 Pages: 110-115

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Deformation Behavior of Ultra-thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang
    • Journal Title

      Key Engineering Materials Vol.443

      Pages: 110-115

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2009

    • Author(s)
      Tsuyoshi Furushima, Syuhei Hirose, Ken-ichi Manabe
    • Journal Title

      Journal of Solid Mechanics and Materials Engineering 3

      Pages: 236-246

    • NAID

      130000667657

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2009

    • Author(s)
      Tsuyoshi Furushima, Syuhei Hirose and Ken-ichi Manabe
    • Journal Title

      Journal of Solid Mechanics and Materials Engineering 3

      Pages: 236-246

    • NAID

      130000667657

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Influence of Surface Topographical Interaction between Tool and Material in Micro-deep Drawing2009

    • Author(s)
      T. Shimizu, Y. Murashige, K. Ito,,K. Manabe
    • Journal Title

      Journal of Solid Mechanics and Materials Engineering Vol.3-2

      Pages: 397-408

    • NAID

      130000667673

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Influence of Surface Topographical Interaction between Tool and Material in Micro-deep Drawing2009

    • Author(s)
      T.Shimizu, Y.Murashige, K.Ito, K.Manabe
    • Journal Title

      Journal of Solid Mechanics and Materials Engineering Vol.3-2

      Pages: 397-408

    • NAID

      130000667673

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] FE Analysis of Size Effect on Deformation and Heat Transfer Behavior in Microtube Dieless Drawing2008

    • Author(s)
      T. FURUSHIMA and K. MANABE
    • Journal Title

      Journal of Materials Processing Technology 201

      Pages: 123-127

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2008

    • Author(s)
      Tsuyoshi Furushima, Syuhei Hirose, Ken-ichi Manabe
    • Journal Title

      Proc. 3rd JSME/ASME International Conference on Materials and Processing(ICM&P 2008) CD-ROM

    • NAID

      130000667657

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] FE Analysis of Size Effect on Deformation and Heat Transfer Behavior in Microtube Dieless Drawing2008

    • Author(s)
      T. Furushima, K. Manabe
    • Journal Title

      Journal of Materials Processing Technology 201

      Pages: 123-127

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Validation of FE Simulation Based on Surface Roughness Model in Micro Deep Drawing2008

    • Author(s)
      K. Manabe, T. Shimizu, H. Koyama, M. Yang K. Ito
    • Journal Title

      Journal of Materials Processing Technology Vol.204

      Pages: 89-93

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2008

    • Author(s)
      Tsuyoshi Furushima, Syuhei Hirose, Ken-ichi Manabe
    • Journal Title

      Proc. 3rd JSME/ASME International Conference on Materials and Processing (ICM&P 2008) (CD-ROM)

    • NAID

      130000667657

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] A Novel Processing for Microtubes - Superplastic Dieless Drawing Technique -2008

    • Author(s)
      Tsuyoshi Furushima, Ken-ichi Manabe
    • Journal Title

      Proc. 9^<th>International Conference on Technology of Plasticity (9th ICTP 2008) (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Validation of FE Simulation Based on Surface Roughness Model in Micro Deep Drawing2008

    • Author(s)
      K. Manabe, T. Shimizu, H. Koyama, M. Yang, K. Ito
    • Journal Title

      Journal of Materials Processing Technology Vol. 204

      Pages: 89-93

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Journal Article] A Novel Processing for Microtubes-Superplastic Dieless Drawing Technique-2008

    • Author(s)
      Tsuyoshi Furushima and Ken-ichi Manabe
    • Journal Title

      Proc.9^<th> International Conference on Technology of Plasticity(9th ICTP 2008) (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Experimental study on multi-pass dieless drawing process of superplastic Zn-22%Al alloy microtubes2007

    • Author(s)
      T. Furushima and K. Manabe
    • Journal Title

      Journal of Materials Processing Technology 187-188

      Pages: 236-240

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] FE ANALYSIS OF SIZE EFFECT ON DEFORMATION AND HEAT TRANSFER BEHAVIOR IN MICROTUBE DIELESS DRAWING2007

    • Author(s)
      T. Furushima and K. Manabe
    • Journal Title

      Proceedings of the 10th Advances in Materials and Processing Technologies

      Pages: 275-283

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] ダイレス引抜き加工の内面溝付銅管への適用2007

    • Author(s)
      古島剛、真鍋健一、新井淳、石橋明彦、日名子伸明、白井崇
    • Journal Title

      銅と銅合金 46巻

      Pages: 111-115

    • NAID

      40015603489

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Experimental study on multi-pass dieless drawing process of superplastic Zn-22% Al alloy microtubes2007

    • Author(s)
      T. Furushima and K. Manabe
    • Journal Title

      Journal of Materials Processing Technology 187-188

      Pages: 236-240

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] ダイレス引抜き加工の内面溝付銅管への適用2007

    • Author(s)
      古島剛、真鍋健一、新井淳、石橋明彦、日名子伸明、白井 崇
    • Journal Title

      銅と銅合金 46

      Pages: 111-115

    • NAID

      40015603489

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] ひずみ速度感受性の温度依存性を考慮した超塑性ダイレスチューブ引抜きの熱-変形連成FEM解析2007

    • Author(s)
      古島 剛, 真鍋 健一
    • Journal Title

      日本塑性加工学会誌(塑性と加工) 第48巻・552号

      Pages: 51-55

    • NAID

      10018287859

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Experimental and numerical study on deformation behavior in dieless drawing process of superplastic microtubes2007

    • Author(s)
      T.FURUSHIMA and K. MANABE
    • Journal Title

      Journal of Materials Processing Technology 191

      Pages: 59-63

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Experimental and numerical study on deformation behavior in dieless drawing process of superplastic microtubes2007

    • Author(s)
      T. FURUSHIMA and K. MANABE
    • Journal Title

      Journal of Materials Processing Technology 191

      Pages: 59-63

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] アルミ二ウム合金押出異形中空形材のダイレス引抜き2007

    • Author(s)
      古島剛、真鍋健一
    • Journal Title

      第57巻

      Pages: 351-356

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] ひずみ速度感受性の温度依存性を考慮した超塑性ダイレスチューブ引抜きの熱-変形連成FEM 解析2007

    • Author(s)
      古島剛、真鍋健一
    • Journal Title

      日本塑性加工学会誌(塑性と加工) 第48巻552号

      Pages: 51-55

    • NAID

      10018287859

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] アルミニウム合金押出異形中空形材のダイレス引抜き2007

    • Author(s)
      古島 剛、真鍋健一
    • Journal Title

      軽金属 第57巻

      Pages: 351-356

    • NAID

      10019520642

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] 内面溝付銅管のダイレス引抜き加工2006

    • Author(s)
      古島 剛, 真鍋 健一, 新井 淳
    • Journal Title

      第57回塑性加工連合講演会講演論文集

      Pages: 439-440

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] 超塑性ダイレス引抜きによるマイクロチューブの創成実験2006

    • Author(s)
      古島 剛, 真鍋 健一, 酒井 孝
    • Journal Title

      日本塑性加工学会誌(塑性と加工) 第47巻・548号

      Pages: 870-874

    • NAID

      10017953651

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] EXPERIMENTAL AND NUMERICAL STUDY ON DEFORMATION BEHAVIOR IN DIELESS DRAWING PROCESS OF SUPERPLASTIC MICROTUBES2006

    • Author(s)
      T.Furushima, K.Manabe
    • Journal Title

      Proceedings of Int. Conf. On Advanced Materials & Processing Technol. AMPT 2006 CD-ROM

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] EXPERIMENTAL STUDY ON MULTI-PASS DIELESS DRAWING PROCESS OF SUPERPLASTIC Zn-22% AlALLOY MICROTUBES2006

    • Author(s)
      T.Furushima, K.Manabe
    • Journal Title

      Proc. of 3^<rd> Int. Conf. on Advanced Forming and Die Manufacturing Technol. AFDM2006 CD-ROM

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] アルミニウム合金異形押出し管材のダイレス引抜き2006

    • Author(s)
      古島 剛, 真鍋 健一
    • Journal Title

      軽金属学会第111回秋期講演大会講演概要集

      Pages: 35-36

    • NAID

      10022564068

    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] EXPERIMENTAL AND NUMERICAL STUDY ON DEFORMATION BEHAVIOR IN DIELESS DRAWING PROCESS OF SUPERPLASTIC MICROTUBES2006

    • Author(s)
      T. Furushima and K. Manabe
    • Journal Title

      Proceedings of Int. Conf. On Advanced Materials & Processing Technol. AMPT 2006 (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] 超塑性ダイレス引抜きによるマイクロチューブの創成実験2006

    • Author(s)
      古島剛、真鍋健一、酒井孝
    • Journal Title

      日本塑性加工学会誌(塑性と加工) 第47巻548号

      Pages: 870-874

    • NAID

      10017953651

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Journal Article] Finite Element Analysis of Micro Cup Drawing Process Using Tool and Blank Models with Surface Roughness2005

    • Author(s)
      K.Manabe, H.Koyama, H.Nouka, M.Yang, K.Ito
    • Journal Title

      Proc.of the 8^<th> Inter.Conf.on Technol.of Plasticity (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-17360357
  • [Journal Article] Hydroforming Process Optimization of Aluminum Alloy Tube Using Intelligent Control Technique2004

    • Author(s)
      K.Manabe, M.Suetake, H.Koyama, M.Yang
    • Journal Title

      Proceedings of the 1^<st> International Conference on New Forming Technology

      Pages: 73-78

    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Hydroforming Process Optimization of Aluminum Alloy Tube Using Intelligent Control Technique2004

    • Author(s)
      K.Manabe, M.Suetake, H.Koyama, M.Yang
    • Journal Title

      Proceedings of the 1^<st> International Conference on New Forming Technology, (ICNFT)

      Pages: 73-78

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Optimal Control of Tube Hydroforming Process2004

    • Author(s)
      K.Akimoto, M.Suetake, K.Manabe, M.Yang
    • Journal Title

      Proceedings of 43^<rd> Annual Graduation Project Conference for Student Members of JSME, (in Japanese)

      Pages: 245-246

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Hydroforming Process optimization of Aluminum Alloy Tube Using Intelligent Control Technique2004

    • Author(s)
      K.Manabe, M.Suetake, H.Koyama, M.Yang
    • Journal Title

      Proceedings of the 1^<st> International Conference on New Forming Technology (ICNFT)

      Pages: 73-78

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] チューブハイドロフォーミングの最適制御2003

    • Author(s)
      秋元健太郎, 末武正充, 真鍋健一, 楊明
    • Journal Title

      日本機械学会関東支部代43回学生員卒業研究発表講演会

      Pages: 235-246

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of Intelligent Tube Hydroforming System2003

    • Author(s)
      M.Suetake, K.Manabe, S.Miyamoto, H.Koyama, T.Yagami, M.Yang
    • Journal Title

      Proceedings of 54th Jpn. Joint Conf. Tech. Plasticity, (in Japanese)

      Pages: 333-334

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of Tube Hydroforming with Intelligent Process Control System2003

    • Author(s)
      M.Suetake, K.Manabe, S.Miyamoto, H.Koyama, T.Yagami, M.Yang
    • Journal Title

      Proceedings of International Workshop on Tube Hydroforming (TUBEHYDRO2003)

      Pages: 7-12

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] 知的制御チューブハイドロフォーミングシステムの試作2003

    • Author(s)
      末武正充, 真鍋健一, 宮本俊介, 小山寛, 谷上哲也, 楊 明
    • Journal Title

      第54回塑性加工連合講演会論文集

      Pages: 333-334

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Journal Article] Development of Tube Hydroforming with Intelligent Process Control System2003

    • Author(s)
      M.Suetake, K.Manabe, S.Miyamoto, H.Koyama, T.Yagami, M.Yang
    • Journal Title

      Proceedings of International Workshop on Tube Hydroforming (TUBCHYDRO2003)

      Pages: 7-12

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360392
  • [Presentation] 逐次ハイドロ十字成形における微細長尺管の変形挙動に及ぼす摩擦力の影響2023

    • Author(s)
      田村緋梨、 吉原 正一郎、真鍋 健一
    • Organizer
      第74回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] 柔構造金型を用いた逐次ハイドロ成形の工程におけるマイクロ長尺管の材料流動2022

    • Author(s)
      田村緋梨、大塚洋平、吉原正一郎、真鍋健一
    • Organizer
      2022年塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] Effects of Micro-Long Tube Size on Material Flow in Incremental Cross-Shape Hydroforming2022

    • Author(s)
      Akari Tamura, Shoichiro Yoshihara, Ken-ichi Manabe, Zicheng Zhang
    • Organizer
      10th International Conference on Tube Hydroforming, TUBEHYDRO2022
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] T-shape Hydroforming Simulation of Microtubes Using a Simplified Finite Element Model Considering Materials Heterogeneity2022

    • Author(s)
      Shoichiro Yoshihara, Tsuyoshi Furushima, Hideki Sato, Ken-ichi Manabe
    • Organizer
      10th International Conference on Tube Hydroforming, TUBEHYDRO2022
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] 簡易多結晶有限要素解析によるマイクロT成形における長尺管の材料流動挙動2022

    • Author(s)
      吉原正一郎、古島剛、佐藤英樹、真鍋健一
    • Organizer
      第73回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] 逐次ハイドロ十字成形を用いたマイクロ長尺管の材料流動に及ぼす成形条件の効果2022

    • Author(s)
      田村緋梨、吉原正一郎、真鍋健一
    • Organizer
      第73回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] マイクロT成形における結晶粒を考慮した簡易有限要素解析による材料流動挙動(続報)2022

    • Author(s)
      吉原正一郎、古島剛、佐藤英樹、真鍋健一
    • Organizer
      2022年塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-22K04761
  • [Presentation] 柔構造金型を用いた逐次ハイドロ成形の工程におけるマイクロ長尺管の材料流動2021

    • Author(s)
      大塚 洋平、吉原 正一郎、真鍋 健一
    • Organizer
      2021年度塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] 微細長尺管の軸押込みによる金型内の材料流動挙動2021

    • Author(s)
      河野 開、吉原 正一郎、真鍋 健一
    • Organizer
      2021年度塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] マイクロT成形における結晶粒を考慮した簡易有限要素解析による材料流動挙動2021

    • Author(s)
      吉原 正一郎、古島剛、佐藤英樹、真鍋 健一
    • Organizer
      2021年度塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] 柔構造金型を利用した長尺微細管のハイドロフォーム性向上2020

    • Author(s)
      安井 孟、 吉原 正一郎、真鍋 健一、張自成
    • Organizer
      第71回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] マイクロ長尺管のチューブハイドロフォーミングにおける材料流動と成形性2020

    • Author(s)
      安井 孟、吉原 正一郎、真鍋 健一、高橋 智
    • Organizer
      第71回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] Advanced Micro Tube Forming Technology2020

    • Author(s)
      Ken-ichi MANABE
    • Organizer
      The 8th International Conference on Nanoscience and Nanotechnology (ICONN2020)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] Finite Element Analysis on Cross-Shape Hydroforming Process for Micro Tubes Utilizing Die Structure with Allowable Local Die-Opening Deformation2019

    • Author(s)
      張自成、劉 宏浩、古島 剛、真鍋健一、礼 賓
    • Organizer
      2019年度塑性加工春季講演会
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] High pressure hydroforming pf metal microtube: possibility and challenges2019

    • Author(s)
      Ken-ichi MANABE
    • Organizer
      2019 International Conference on Advances in Materials, Mechanical and Manufacturing
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] 局所型開きたわみ変形を許容する金型構造を用いたマイクロチューブハイドロフォーミング2019

    • Author(s)
      張 自成,真鍋 健一,古島 剛,高橋 智
    • Organizer
      日本機械学会関東支部 第25期総会・講演会
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] A challenge to microforming utilizing ultrahigh pressure2018

    • Author(s)
      Ken-ichi MANABE
    • Organizer
      The 11th Asian Workshop on Micro/Nano Forming Technology
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18K04781
  • [Presentation] FE analysis of micro tube hydroforming process for cross- and T-shaped components2017

    • Author(s)
      Ken-ichi Manabe , Kenta Itai, Hideki Sato, Marko Vilotic, Satoru Takahashi
    • Organizer
      8th International Conference on Tube Hydroforming (TUBEHYDO2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] 極細銅管のマイクロハイドロT成形2017

    • Author(s)
      森 茂樹、板井健太、佐藤英樹、多田一夫、真鍋健一、高橋 智
    • Organizer
      第68回塑性加工連合講演会
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] Fabrication of Micro T-shaped Tubular Components by Hydroforming Process2017

    • Author(s)
      Ken-ichi Manabe, Kenta Itai, Kazuo Tada
    • Organizer
      20th International ESAFORM Conference on Material Forming-ESAFORM2017-
    • Place of Presentation
      Dublin, Ireland
    • Year and Date
      2017-04-26
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] Factors influencing the forming characteristics in micro tube hydroforming by ultra high-forming pressure2017

    • Author(s)
      Ken-ichi Manabe, Hideki Sato, Kenta Itai, Marko Vilotic, Kazuo Tada
    • Organizer
      12th International Conference on Technology of Plasticity
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] FAILURES IN MICRO CROSS-SHAPED TUBE HYDROFORMING PROCESS2017

    • Author(s)
      K. Manabe, M. Vilotic, K. Itai and K. Tada
    • Organizer
      14th International Conference on Fracture (ICF 14)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] Fabrication of Micro T-shaped Tubular Components by Hydroforming Process2017

    • Author(s)
      Ken-ichi Manabe, Kenta Itai, Kazuo Tada
    • Organizer
      The 20th International ESAFORM Conference on Material Forming (ESAFORM 2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] マイクロ銅管のクロス形ハイドロフォーミングにおける成形限界2016

    • Author(s)
      板井謙太、森茂樹、佐藤英樹、多田一夫、古島剛、真鍋健一
    • Organizer
      平成28年度塑性加工春季講演会
    • Place of Presentation
      京都工芸繊維大学
    • Year and Date
      2016-05-20
    • Data Source
      KAKENHI-PROJECT-16K14440
  • [Presentation] 超高圧とパンチモーションとの逐次制御によるマイクロ超探絞り過程における適正加工条条件の有限要素解析2015

    • Author(s)
      眞野峻行、佐藤英樹、近藤大輝、真鍋健一
    • Organizer
      第66回塑性加工連合講演会
    • Place of Presentation
      福島県、いわき市
    • Year and Date
      2015-10-29
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Numerical and Experimental Investigation of Cross Shaped Micro Tube Hydroforming2015

    • Author(s)
      Hideki Sato, Dai Kobayashi, Ken-ichi Manabe
    • Organizer
      The 7th International Conference of Tube Hydroforming(国際会議)
    • Place of Presentation
      Xian, China
    • Year and Date
      2015-09-09
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Numerical Study of Micro Hydro Deep Drawing2015

    • Author(s)
      Liang Luo, Zhengyi Jiang, Dongbin Wei,Xianming Zhao, Di Wu Ken-ichi Manabe, Hideki Sato
    • Organizer
      The 7th International Conference of Tube Hydroforming(国際会議)
    • Place of Presentation
      Xian, China
    • Year and Date
      2015-09-09
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] FEM-base Investigation of Micro Ultra-Deep Drawing2015

    • Author(s)
      Takayuki Mano, Hideki Sato, Daiki Kondo, Ken-ichi Manabe
    • Organizer
      The Asian Workshop on Micro/Nano Forming Technology(国際会議)
    • Place of Presentation
      Nagano, Japan
    • Year and Date
      2015-10-14
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Study on Micro Extra Deep Drawing Process with Ultrahigh Fluid Pressure and Press Control2015

    • Author(s)
      Hideki Sato, Daiki Kondo, Ken-ichi Manabe, Kuniyoshi Ito
    • Organizer
      The 4th International Conference on New Forming Technology (国際会議)
    • Place of Presentation
      Scotland, UK
    • Year and Date
      2015-08-06
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] 超高圧とパンチモーションとの逐次制御によるマイクロ超深絞りのFEMシミュレーション2015

    • Author(s)
      佐藤英樹、近藤大輝、眞野峻行、真鍋健一
    • Organizer
      平成27年度塑性加工春季講演会
    • Place of Presentation
      神奈川県,横浜市
    • Year and Date
      2015-05-29
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Real-time Monitoring System for Dieless Bellows Forming using Machine Vision2013

    • Author(s)
      S. Supriadi, T. Furushima, K. Manabe
    • Organizer
      the 13th International Conference on QIR (Quality in Research)
    • Place of Presentation
      Yogyakarta, Indonesia
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Presentation] 金属マイクロチューブのダイレスねじり引抜き法の開発2013

    • Author(s)
      古島 剛,今川 祐介,真鍋 健一
    • Organizer
      日本機械学会第21回機械材料・材料加工技術講演会(M&P2012)
    • Place of Presentation
      東京
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Presentation] Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube2012

    • Author(s)
      Z.C.Zhang, K. Manabe, T. Furushima and K. Tada
    • Organizer
      The 3nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP2012)
    • Place of Presentation
      Beihai, China
    • Data Source
      KAKENHI-PROJECT-23656468
  • [Presentation] Development of Cyclic Rotating Bending Apparatus for Microstructure Control of Metal Tubes2012

    • Author(s)
      Z. Zhang, K. Manabe, K.Takahashi, T. Furushima and K. Tada
    • Organizer
      第63回塑性加工連合講演会
    • Place of Presentation
      北九州国際会議場
    • Data Source
      KAKENHI-PROJECT-23656468
  • [Presentation] Transitional Adhesion Behavior of Stainless Steel Foils in Dry Progressive Micro Deep Drawing Process2011

    • Author(s)
      Tetsuhide Shimizu, Yushiro Murashige, Ming Yang, Ken-ichi Manabe
    • Organizer
      the 6th International Conference of MicroManufacturing (ICOMM2011)
    • Place of Presentation
      東京電機大学(東京都)
    • Year and Date
      2011-03-09
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Adhesive Wear on Dry Sliding Surface in Miniaturization of Deep-drawing Process2010

    • Author(s)
      T.Shimizu, Y.Murashige, K.Ito, M.Yang, K.Manabe
    • Organizer
      International Conference on Materials Processing Technology 2010, MAPT2010
    • Place of Presentation
      タイ・バンコク市
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Deformation Behavior of Ultra-thin Metal Foils in Strip Drawing Friction Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang
    • Organizer
      The 9th Asia-Pacific Conference on Materials Processing (APCMP2010)
    • Place of Presentation
      University of New South Wales(オーストラリア・シドニー)
    • Year and Date
      2010-06-09
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] Plastic Deformation in Surface Layer of Metal Foil in Strip Drawing Test2010

    • Author(s)
      T.Shimizu, K.Manabe, M.Yang, K.Ito
    • Organizer
      The 4th International Conference on Tribology in Manufacturing Processes (ICTMP2010)
    • Place of Presentation
      Acropolis, exhibition centre(フランス・ニース)
    • Year and Date
      2010-06-14
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] りん青銅極薄箔材のマイクロ深絞り性に及ぼす内部結晶組織の影響2009

    • Author(s)
      清水徹英, 小川真弘, 真鍋健一, 伊藤國吉
    • Organizer
      日本伸銅協会 銅及び銅合金技術研究会第49回講演大会
    • Place of Presentation
      京都テルサ(京都市)
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] 金属マイクロチューブのレーザーダイレス引抜きに関する研究2008

    • Author(s)
      古島剛、野田雄太、真鍋健一
    • Organizer
      第59回塑性加工連合講演会講演論文集
    • Place of Presentation
      広島大学(東広島市)
    • Year and Date
      2008-11-09
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] 異形管の超塑性ダイレス引抜きに関する検討2008

    • Author(s)
      古島剛、白崎篤、真鍋健一
    • Organizer
      平成20年度塑性加工春季講演会論文集
    • Place of Presentation
      日本大学生産工学部,(習志野市)
    • Year and Date
      2008-05-26
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] マイクロチューブのレーザーダイレス引抜きに関する研究2008

    • Author(s)
      野田雄太、古島 剛、真鍋 健一
    • Organizer
      日本機械学会関東学生会47回卒業研究発表講演会
    • Place of Presentation
      東京海洋大学 越中島キャンパス
    • Year and Date
      2008-03-14
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] 金属マイクロチューブのレーザーダイレス引抜きに関する研究2008

    • Author(s)
      古島 剛, 野田雄太, 真鍋健一
    • Organizer
      第59回塑性加工連合講演会講演論文集
    • Place of Presentation
      広島大学 (東広島市)
    • Year and Date
      2008-11-09
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] マイクロチューブのレーザーダイレス引抜きに関する研究2008

    • Author(s)
      野田雄太、古島剛、真鍋健一
    • Organizer
      日本機械学会関東学生会47回卒業研究発表講演会
    • Place of Presentation
      東京海洋大学越中島キャンパス
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] 異形管の超塑性ダイレス引抜きに関する検討2008

    • Author(s)
      古島 剛, 白崎 篤, 真鍋健一
    • Organizer
      平成20年度塑性加工春季講演会論文集
    • Place of Presentation
      日本大学 生産工学部 (習志野市)
    • Year and Date
      2008-05-26
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] 異形複合管の超塑性ダイレス引抜きに関する研究2008

    • Author(s)
      白崎篤、古島剛、真鍋健一
    • Organizer
      日本機械学会関東学生会47回卒業研究発表講演会
    • Place of Presentation
      東京海洋大学 越中島キャンパス
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] マイクロ深絞り成形性に及ぼす金型表面性状の影響に関する実験的検討2008

    • Author(s)
      清水徹英, 真鍋健一, 伊藤國吉, 楊明
    • Organizer
      平成20年度塑性加工春季講演会
    • Place of Presentation
      津田沼
    • Year and Date
      2008-05-24
    • Data Source
      KAKENHI-PROJECT-20360336
  • [Presentation] マイクロチューブのダイレス引抜きにおける変形及び伝熱挙動に及ぼす寸法効果2007

    • Author(s)
      古島剛、真鍋健一
    • Organizer
      平成19年度塑性加工春季講演会論文集
    • Place of Presentation
      名古屋大学
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] 内面溝付銅管のダイレス引抜き加工2006

    • Author(s)
      古島剛, 真鍋健一, 新井淳
    • Organizer
      第57回塑性加工連合講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] アルミニウム合金異形押出し管材のダイレス引抜き2006

    • Author(s)
      古島剛、真鍋健一
    • Organizer
      軽金属学会第111回秋期講演大会講演概要集
    • Place of Presentation
      35-36
    • Data Source
      KAKENHI-PROJECT-18360355
  • [Presentation] Finite Element Analysis of Micro Cup Drawing Process Using Tool and Blank Models with Surface Roughness2005

    • Author(s)
      K.Manabe, H.Koyama, H.Nouka, M.Yang, K.Ito
    • Organizer
      The 8th Inter.Conf.on Technol.of Plasticity
    • Place of Presentation
      イタリア・ベローナ
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360357
  • [Presentation] Micro Sheet Hydroforming Process of Ultra-Thin Pure Titanium Foil

    • Author(s)
      Sato, H., Manabe, K., Wei, D., Jiang, Z., Kondo, D
    • Organizer
      12th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2014)
    • Place of Presentation
      Kaohsiung, Taiwan
    • Year and Date
      2014-09-01 – 2014-09-05
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Development of Scaled Strip Drawing Friction Tester for Micro-Sheet Metal Forming

    • Author(s)
      Tetsuhide Shimizu, Ming Yang, Ken-ichi Manabe
    • Organizer
      The 5th Asian Workshop on Micro/Nano Forming Technology (AWMFT 2012)
    • Place of Presentation
      Harbin, China
    • Data Source
      KAKENHI-PROJECT-23360327
  • [Presentation] Experimental and Numerical Investigation of Micro Sheet Hydroforming of Stainless Steel Foil

    • Author(s)
      Sato, H., Manabe, K., Wei, D., Jiang, Z
    • Organizer
      the ASME 2014 International Conference on Materials and Processing
    • Place of Presentation
      Detroit, USA
    • Year and Date
      2014-06-09 – 2014-06-13
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] 微細粒鋼のマイクロ対向液圧深絞りにおける成形特性

    • Author(s)
      佐藤英樹、真鍋健一
    • Organizer
      第65回塑性加工連合講演会
    • Place of Presentation
      岡山大学
    • Year and Date
      2014-10-11 – 2014-10-13
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Deformation characterization of micro rolling for stainless steel foil

    • Author(s)
      H.B.Xie, K.Manabe, T.Furushima, K. Tada and Z,Y.Jiang
    • Organizer
      11th International Conference on Technology of Plasticity, ICTP 2014
    • Place of Presentation
      Nagoya, Japan
    • Year and Date
      2014-10-19 – 2014-10-24
    • Data Source
      KAKENHI-PROJECT-14F02770
  • [Presentation] トリプルアクションサーボ式マイクロ対向液圧深絞り装置の開発

    • Author(s)
      近藤大輝、佐藤英樹、真鍋健一、伊藤國吉
    • Organizer
      第65回塑性加工連合講演会
    • Place of Presentation
      岡山大学
    • Year and Date
      2014-10-11 – 2014-10-13
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] レーザねじりダイレス引抜きによって創製した金属マイクロチューブの機械的特性評価

    • Author(s)
      古島 剛、今川 祐介、古澤 周作、真鍋 健一、酒井 孝
    • Organizer
      平成26年度塑性加工春季講演会
    • Place of Presentation
      つくば市、茨城
    • Year and Date
      2014-06-06 – 2014-06-08
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Presentation] Formability of Micro Sheet Hydroforming of Ultra-Fine Grained Stainless Steel

    • Author(s)
      Hideki Sato, Ken-ichi Manabe, Daiki Kondo, Dongbin Wei, Zhengyi Jiang
    • Organizer
      11th International Conference on Technology of Plasticity, ICTP 2014
    • Place of Presentation
      Nagoya Congress Center, Nagoya, Japan
    • Year and Date
      2014-10-19 – 2014-10-24
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Numerical Study on Geometrical Size Effect in Micro Sheet Hydroforming

    • Author(s)
      H. Sato, K. Manabe, D. Wei, Z. Jiang
    • Organizer
      7th Asian Workshop on Micro/ Nano Forming Technology
    • Place of Presentation
      Taipei, Taiwan
    • Year and Date
      2014-11-09 – 2014-11-12
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Development of Rotary Laser Dieless Drawing Apparatus for Metal Microtubes

    • Author(s)
      Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa and Ken-ichi Manabe
    • Organizer
      12th Asia-Pacific Conference on Engineering Plasticity and Its Applications(AEPA2014)
    • Place of Presentation
      Kaohsiung、Taiwan
    • Year and Date
      2014-09-01 – 2014-09-05
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Presentation] A novel processing for metal microtubes -rotary laser dieless drawing process-

    • Author(s)
      Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa, Ken-ichi Manabe
    • Organizer
      11th International Conference on Technology of Plasticity(ICTP2014)
    • Place of Presentation
      Nagoya Congress Center,Japan
    • Year and Date
      2014-10-19 – 2014-10-24
    • Data Source
      KAKENHI-PROJECT-24360310
  • [Presentation] マイクロシートハイドロフォーミングにおける板厚スケール因子の効果

    • Author(s)
      佐藤英樹、真鍋健一
    • Organizer
      第65回塑性加工連合講演会
    • Place of Presentation
      岡山大学
    • Year and Date
      2014-10-11 – 2014-10-13
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] Development of Triple Action Servo Press Machine for Micro Hydromechaqnical Deep Drawing

    • Author(s)
      D. Kondo, H. Sato, K. Manabe
    • Organizer
      th Asian Workshop on Micro/ Nano Forming Technology
    • Place of Presentation
      Taipei, Taiwan
    • Year and Date
      2014-11-09 – 2014-11-12
    • Data Source
      KAKENHI-PROJECT-26630369
  • [Presentation] レーザーマルチパスダイレス引抜きにおけるステンレス微細管の表面平滑化の効果

    • Author(s)
      古島剛、古澤周作、真鍋健一
    • Organizer
      日本機械学会関東支部第21期総会講演会
    • Place of Presentation
      横浜国立大学、神奈川
    • Year and Date
      2015-03-20 – 2015-03-21
    • Data Source
      KAKENHI-PROJECT-24360310
  • 1.  YANG Ming (90240142)
    # of Collaborated Projects: 13 results
    # of Collaborated Products: 23 results
  • 2.  NISHIMURA Hisashi (70087170)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 3.  WAKAYAMA Shuichi (00191726)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  FURUSHIMA Tsuyoshi (30444938)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 49 results
  • 5.  YOSHIHARA Shoichiro (00311001)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 6.  TAKAHASHI Satoshi (80260785)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 1 results
  • 7.  KAWAHARA Masanori (40234108)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  SHIMIZU Tetsuhide (70614543)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  高津 俊 (30236236)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 10.  酒井 孝 (50336517)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 11.  KAWADA Seiichi (20152960)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  HASEGAWA Osamu (80244416)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  IGI Satoshi (70281243)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  SAKUMA Hideo (20128573)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  KOYAMA Hiroshi (70345479)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 7 results
  • 16.  MORONUKI Nobuyuki (90166463)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  HIRATA Ryou
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  ANZAI Tetsuya
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  新倉 正和
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  井上 総一郎
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  山本 弘圀
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 22.  YAMAMOTO Hirokuni
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 23.  XIE Haibo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 24.  LI HEJIE
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi