SATOH ISAO 佐藤勲

… Alternative Names

SATOH Isao 佐藤勲

黒崎晏夫クロサキヤスオ

Less

Researcher Number	10170721
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2018: 東京工業大学, その他, 理事・副学長 2016 – 2017: 東京工業大学, 工学院, 教授 2013 – 2015: 東京工業大学, 理工学研究科, 教授 2007 – 2011: Tokyo Institute of Technology, 大学院・理工学研究科, 教授 2006: 東京工業大学, 大学院理工学研究科, 教授 … More 2000 – 2005: 東京工業大学, 大学院・理工学研究科, 教授 2000: Tokyo Institute of Technology Dept.Mech. & Intelligent Sys.Eng.Associate Professor, 工学部, 教授 1991 – 1999: 東京工業大学, 工学部, 助教授 1996: 東京工業大学, 工学部・機械知能システム学科, 助教授 1990: 東京工業大学, 工学部・生産機械工学科, 教授 1988 – 1989: 東京工業大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Thermal engineering / Thermal engineering Except Principal Investigator Thermal engineering
Keywords	Principal Investigator LDV / 金型温度制御 / プラスチック射出成形 / 融着現象 / プラスチック廃棄物 / 同時計測 / 固気二相流 / 吸着蓄熱 / エネルギー工学 / 生産性 … More / 消費エネルギー削減 / 軟化 / レオロジー物性 / 高分子材料 / レーザー加工 / レーザ加工 / 太陽電池 / ビームプロファイル / 液体光学素子 / Softening Temperature / Glass-Transition Temperature / Separation Force / Sticking / Shredder Dust / Melt-Sticking Phenomena / Distinction / Separation / Kinds of Polymers / Polymer Waste / 複数回投入 / ローラー間隔 / 分別能 / 連続分別 / 熱容量 / 融着可能初期温度 / 加熱粒子 / 材料判別 / 材料選別・判別 / 廃棄物再資源化 / 軟化点 / ガラス転移点 / 融着力・引き剥がし力 / シュレッダーダスト / 選別・判別 / プラスチック種 / Contact Area / Rheological Properties / Softening / Interface Temperature / Sticking Phenomenon / Unsteady Heat Conduction / Selection of Materials / Waste Polymers / 選別能 / 塗膜 / 汚れ / 接触界面形状 / 接触面積 / 界面温度 / 非定常熱伝導 / 材料選別回収 / Optical Function / Birefringence Pattern / Heat Diffusion / Molecular Orientation / Interference / Laser Heating / Microscale Structure / Polymeric Materials / 光学的機能 / 複屈折パターン / 熱拡散 / 分子配向緩和 / 干渉光 / ふく射照射 / 微細構造発現 / Smoothing Effect / Phase Shift / Monochromator / Lifetime of Fluorescence / Fluorescent Seed Particles / Simultaneous Measurement / Velocity Measurement / Temperature / 粒子温度 / 強度変調 / 蛍光 / 平滑効果 / 位相変調 / 分光分析 / 蛍光寿命 / 蛍光シ-ド粒子 / 温度・速度計測 / Effective Thermal Conductivity / Remote Heating / Simultaneous Measurement of Temperature and Velocity / Fluorescent Method / Time-Dependent Temperature ofa Particle / Gas-Solid Suspension Flow / 温度履歴計測 / 有効熱伝導率 / 非接触加熱 / 温度・速度同時計測 / 蛍光法 / 粒子温度履歴 / 吸着発熱 / 消費エネルギー / 加熱冷却速度 / ヒートパイプシステム / 排熱利用 / 急加熱・急冷却 / レーザー照射 / 形状制御 / 局所加熱 / そり変形 / 自己組織化 / 成形 / 微細表面テクスチャ / 融着強度 / 損失正接 / 表面エネルギー / 熱収縮差 / 粘弾性特性 / 変形抵抗 / 界面付着強度 / 加熱固体面 / エクセルギー損失 / 低温熱源 / 低圧雰囲気 / 過冷却解除 / フラッシュ蒸発 / 潜熱 / 凍結 / 気液相変化 / 過熱水蒸気 / フラッシュ現象 / 過冷却現象 / 氷晶 / 相変化物質 / 蒸発凍結 … More Except Principal Investigator 伝熱制御 / 流動層 / 射出成形 / 残留複屈折 / 伝熱促進 / 過冷却解除 / 伝熱促進機構 / 冷却制御 / 成形限界 / 表面転写性 / 超高精度成形技術 / フローマーク / 高分子材料 / Pneumatic Conveyance / Cold Energy / 気体搬送 / 冷熱 / Quality Improvement / Heat Transfer Control / Injection Molding / 射出成形法 / ひけ / 高品位化 / 高分子射出成形 / 能動的制御 / マイクロ波励振 / 交流電場加振 / 微小液滴 / 潜熱蓄熱 / Freezing of Supercooled PCM / Spherical Capsule / Utilization of Latent Heat / 冷熱損失 / ポンプ動力 / 空気搬送 / 小球カプセル / 冷熱輸送 / カプセル / 潜熱利用 / Mass Transfer / Optical Visualization / Direct Contact Heat Exchange / Structure of Heat Transfer Augmentation / Fluidized-Bed-Type Heat Exchanger / 光学的測定 / 接触頻度 / 接触時間 / 接触熱交換 / 物質伝達 / 光学的可視化 / 接触熱伝導 / 流動層熱交換器 / Heat Exchanger / Heat Transfer Enhancement / Temperature Visualization / Fluidized Bed / 伝熱 / 温度の可視化 / Cooling Control / Flow Mark / Molding Limit / Surface Transcribability / Biretringence / Super Precision Molding Technique / Skin Layer / 光学的計測 / 高精度成形技術 / 残留福屈折 / 表面固化層 / Flow Length / Transcription Ability / Birefringence / Zinc-selenide / Radiation Absorption Coefficient / Radiation / Injection Molding Process / Polymer Materials / 炭酸ガスレーザー / YAGレーザー / ふく射エネルギー / 樹脂充填性 / 薄肉成形品 / 耐熱ガラス / ハロゲンランプ / 赤外ふく射エネルギ / 流動長さ / 転写性 / 複屈折 / ジンクセレン / ふく射吸収係数 / ふく射 / Absorption Coefficient / Lowering of Transcribability / Short-Shot Phenomenon / Residual Birefringence / Radiation Heating / Injection-Molding of Polymer / 粘着力 / 固化層 / 高品質か / 吸収特性 / 転写不良 / 充填不良 / ふく射加熱 / Brine-Ice Mixture / Freezing Preservation of Organism / Supercooling / Microchannels / Utilization / Conveyance / Storage / Phase-Change Phenomena / 冷エネルギー / 凍結保存 / 固液二相流 / 分子動力学法 / 過冷却現象 / 液状氷 / 生体の凍結保存 / 過冷却 / マイクロチャンネル / 保存・輸送・利用 / 相変化 / Rheological Approach / Molecular Orientation / Residual Stress / Sink-Mark / 非接触温度計測 / 樹脂物性の圧力依存性 / 保圧過程 / 粘弾性挙動 / 残留応力・分子配向 / ひけ位置 / 粘弾性解析 / 分子配向 / 残留応力 / Control of Void Fraction / Circulating Fluidized Particle Cell / IR Thermography / CO_2 Laser Heating / Radiative Penetration Depth / Radiation Properties of Fluidized Particles / Radiative Heat Transfer / High-Temperature Gas-Solid Suspension Flow / ふく射伝播機構 / 空隙率 / 粒子挙動 / 固気二相流 / 空隙率の能動的制御 / セル内循環流動層 / サーモグラフィ / 赤外線加熱 / ふく射浸透距離 / 粒子群ふく射特性 / ふく射伝熱 / 高温固気二相流 / Control of Thermophysical Properties / Combustion Control, / Boiling Control, / High Temperature System, / Solidification and Melting / Flow Separation Control / Heat Transfer Control, / 凝固・融解 / 熱物性制御 / 燃焼制御 / 沸騰制御 / 高温複合系 / 凝固融解 / はく離制御 / 逆解析 / 可視化 / 接触抵抗 / 熱交換器 / 針状結晶 / 静電力 / 凍結制御 / 加振による変形 / 過冷却液滴 Less

Space-time concentration of unused thermal energy by using adsorption heat storage and its application to temperature control of mold in polymer injection molding processPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
過渡レンズ効果を用いた液体光学素子開発と応用Principal Investigator
- Principal Investigator
  
  佐藤勲
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for JSPS Fellows
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Study on Reduction of Energy Consumption for Mold-Temperature Control Using an Adsorption Heat Storage Material Inclusion MoldPrincipal Investigator
- Principal Investigator
  
  SATOH ISAO
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Study on Progressive Reduction Method of Energy Consumption for Mold-Temperature Control by Utilizing Waste Heat from the Polymer Injection-Molding ProcessPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Study on Novel Forming Method of Micro Surface Texture on Polymer Products Utilizing Self-Organization-Like Auto-TransformationPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Embodiment of the Separation/Distinction Method for Polymer Waste Materials by Utilizing Melt-Sticking PhenomenaPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
工学的応用展開を見据えた固体間融着機構と熱的制御手法の検討Principal Investigator
- Principal Investigator
  
  佐藤勲
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
A Basic Study on Material Selection Process from Waste Polymers Utilizing Unsteady Heat ConductionPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Temperature Visualization of Fluidizing Particles and Construction of a Heat Transfer Model in a Fluidizing Bed Heat Exchanger.
- Principal Investigator
  
  YAMADA Jun
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Yamanashi University
Microscale Property Control on Polymer films by Utilizing Interfering Laser HeatingPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Pheology and Heat Transfer Control of Microscale Instability Phenomena on Injection Molded Polymer Surfaces
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  UNIVERSITY OF ELECTRO-COMMUNICATIONS
流動層熱交換器における粒子-伝熱面接触時の非定常熱伝導
- Principal Investigator
  
  山田純
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  University of Yamanashi
A Study of Super Precise Injection Molding Technique Assisted by Radiation Energy
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  THE UNIVERSITY OF ELECTRO-COMMUNICATIONS
  Tokyo Institute of Technology
気液相変化による液体の凍結のエクセルギー高効率利用への応用Principal Investigator
- Principal Investigator
  
  佐藤勲
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
Research on Temperature/Velocity Measurement Technique Utilizing Laser-Doppler Velocimetory with Fluorescent Seed ParticlesPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
気液相変化による液体の凍結のエクセルギー高効率利用への応用Principal Investigator
- Principal Investigator
  
  佐藤勲
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
Synthetic Study on the Techniques for Storage/Conveyance/Utilization of Cold Energy using Phase-Change Phenomena
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Study on Quality Improvement Techniques for Injection-Molding of Polymer Utilizing Heat Transfer Control
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
共振現象を利用した過冷却微小液摘の凍結の能動的制御
- Principal Investigator
  
  黒崎晏夫
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
Microscopic Measurement of Particle Laden with aHigh Teperature Gas Flow by Using a Fluorescet MethodPrincipal Investigator
- Principal Investigator
  
  SATOH Isao
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Toky Institute of Technology
共振現象を利用した過冷却微小液滴の凍結の能動的制御
- Principal Investigator
  
  KUROSAKI Y
- Project Period (FY)
  1991
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
Effects of Properties and Behavior of Particles Laden with High Temperature Gas Flow on the Heat Transfer Augmentation and Control
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Technologies for Quality Improvement of the Injection Molded Polymer Products Utilizing the Heat Transfer Control Technique
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Research on Heat Transfer Control
- Principal Investigator
  
  AIHARA T
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  Tohoku University
STUDY ON MICRO-SCALE STRUCTURE OF HEAT TRANSFER AUGMENTATION FOR FLUIDIZED-BED-TYPE HEAT EXCHANGER
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
STUDY ON PNEUMATIC CONVEYANCE OF COLD ENERGY USING A PHASE-CHANGE MATERIAL ENCLOSED IN SMALL SPHERICAL CAPSULES
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology

All 2018 2016 2015 2012 2011 2007 2005 2004 Other

All Journal Article Presentation Book Patent

[Book] プラスチック金型と熱移動.樹脂の流れと制御法2011
- Author(s)
  佐藤勲
- Total Pages
  147
- Publisher
  日刊工業新聞社
- Data Source
  KAKENHI-PROJECT-21360093
[Book] プラスチック金型と熱移動樹脂の流れと制御法2011
- Author(s)
  佐藤勲
- Total Pages
  147
- Publisher
  日刊工業新聞社
- Data Source
  KAKENHI-PROJECT-21360093
[Journal Article] Bessel beam laser-scribing of thin film silicon solar cells by ns pulsed laser2016
- Author(s)
  Duc Hong DOAN, Ryoichi IIDA, Byunggi KIM, Isao SATOH and Kazuyoshi FUSHINOBU
- Journal Title
  
  JTST
  
  Volume: 11 Issue: 1 Pages: JTST0011-JTST0011
- DOI
  10.1299/jtst.2016jtst0011
- NAID
  130005142375
- ISSN
  1880-5566
- Language
  English
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-14F04049
[Journal Article] 炭酸ガスレーザー加熱による高分子材料表面の自己組織化的構造形成の観察2007
- Author(s)
  北村弘通, 斉藤卓志, 川口達也, 佐藤勲
- Journal Title
  
  成形加工'07(プラスチック成形加工学会第18回年次大会講演論文集) (掲載決定)
- Data Source
  KAKENHI-PROJECT-18360100
[Journal Article] プラスチック材料に対する加熱粒子の粘着挙動に関する研究2005
- Author(s)
  島一元, 佐藤勲, 斉藤卓志, 川口達也
- Journal Title
  
  第42回日本伝熱シンポジウム講演論文集 3
  
  Pages: 749-750
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360107
[Journal Article] プラスチック材料に対する加熱粒子の粘着挙動に関する研究2005
- Author(s)
  島一元, 佐藤勲, 斉藤卓志, 川口達也
- Journal Title
  
  第42回日本伝熱シンポジウム講演論文集 (発表予定)
- Data Source
  KAKENHI-PROJECT-15360107
[Journal Article] A Study on Adhesion Behavior of Heated Beads Pressed onto Polymer Materials2005
- Author(s)
  Shima, K., Satoh, I., Saito, T., Kawaguchi, T.
- Journal Title
  
  Proc.of the 42st National Heat Transfer Symposium of Japan Vol.3
  
  Pages: 749-750
- NAID
  10019038459
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360107
[Journal Article] プラスチック材料に対する加熱粒子の粘着挙動に関する研究2005
- Author(s)
  島一元, 佐藤勲, 斉藤卓志, 川口達也
- Journal Title
  
  第42回日本伝熱シンポジウム講演論文集 3
  
  Pages: 749-750
- Data Source
  KAKENHI-PROJECT-15360107
[Journal Article] 熱融着現象を利用した高分子材料の分別手法-実現可能性の検討2004
- Author(s)
  島一元, 佐藤勲, 斉藤卓志
- Journal Title
  
  第41回日本伝熱シンポジウム講演論文集 3
  
  Pages: 689-690
- Data Source
  KAKENHI-PROJECT-15360107
[Journal Article] 熱融着現象を利用した高分子材料の分別手法-実現可能性の検討2004
- Author(s)
  島一元, 佐藤勲, 斉藤卓志
- Journal Title
  
  第41回日本伝熱シンポジウム講演論文集 3
  
  Pages: 689-690
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360107
[Journal Article] Separation Technique for Polymer Mixture using Melting - Feasibility Study on the Separation Technique2004
- Author(s)
  Shima, K., Satoh, I., Saito, T
- Journal Title
  
  Proc.of the 41st National Heat Transfer Symposium of Japan Vol.3
  
  Pages: 689-690
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360107
[Patent] 熱可塑性材料判別方法および熱可塑性材料判別装置2004
- Inventor(s)
  佐藤勲
- Industrial Property Rights Holder
  東京工業大学
- Industrial Property Number
  2004-302660
- Filing Date
  2004-10-18
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360107
[Presentation] エネルギー工学の観点から見た成形加工と金型温度制御2018
- Author(s)
  佐藤　勲、齊藤卓志
- Organizer
  プラスチック成形加工学会第29回年次大会
- Invited
- Data Source
  KAKENHI-PROJECT-16H04275
[Presentation] Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation: numerical study2015
- Author(s)
  Duc Hong Doan, Takushi Saito, Tatsuya Kawaguchi and Isao Satoh
- Organizer
  The Polymer Processing Society Conference 2015
- Place of Presentation
  Graz, Austria
- Year and Date
  2015-09-25
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-14F04049
[Presentation] A compressible, multi-phase flow finite volume method for laser ablation: influence of laser beam profile2015
- Author(s)
  H.D. DOAN, I. SATOH and K. FUSHINOBU
- Organizer
  The 26th International Symposium on Transport Phenomena
- Place of Presentation
  Leoben, Austria
- Year and Date
  2015-09-29
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-14F04049
[Presentation] 水の相変化を伴う熱移動を利用した金型加熱/冷却に関する研究2012
- Author(s)
  ヨウシイ、佐藤勲、齊藤卓志、川口達也
- Organizer
  プラスチック成形加工学会2012年度年次大会
- Place of Presentation
  タワーホール船堀(東京都江戸川区)
- Year and Date
  2012-06-13
- Data Source
  KAKENHI-PROJECT-21360093
[Presentation] ヒートパイプによる成形金型の加熱・冷却システムの研究2011
- Author(s)
  中城啓太、齊藤卓志、川口達也、佐藤勲
- Organizer
  日本機械学会2011年度年次大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-21360093
[Presentation] ヒートパイプによる成形金型の加熱・冷却システムの研究2011
- Author(s)
  中城啓太、齊藤卓志、川口達也、佐藤勲
- Organizer
  日本機械学会2011年度年次大会
- Place of Presentation
  東京工業大学(東京都目黒区)
- Year and Date
  2011-09-12
- Data Source
  KAKENHI-PROJECT-21360093
[Presentation] ヒートパイプによる効率的な成形金型温度コントロール2011
- Author(s)
  齊藤卓志、楊子、川口達也、佐藤勲
- Organizer
  型技術ワークショップ2011
- Place of Presentation
  じゅうろくプラザ(岐阜県岐阜市)
- Year and Date
  2011-11-21
- Data Source
  KAKENHI-PROJECT-21360093
[Presentation] INFLUENCE OF LASER BEAM PROFILE ON LASER DRILLING: A NUMERICAL INVESTIGATION
- Author(s)
  D.H. Doan, I. Satoh, K. Fushinobu
- Organizer
  ISTP25
- Place of Presentation
  Krabi, Thailand, Aonang Villa Resort
- Year and Date
  2014-11-04 – 2014-11-07
- Data Source
  KAKENHI-PROJECT-14F04049

1. YAMADA Jun (40210455)

# of Collaborated Projects: 12 results

# of Collaborated Products: 0 results
2. KUROSAKI Y (70016442)

# of Collaborated Projects: 11 results

# of Collaborated Products: 0 results
3. SAITO Takushi (20302937)

# of Collaborated Projects: 8 results

# of Collaborated Products: 13 results
4. KAWAGUCHI Tatsuya (40376942)

# of Collaborated Projects: 4 results

# of Collaborated Products: 5 results
5. FUSHINOBU Kazuyoshi (50280996)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
6. KANAI Toshitaka

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. DOAN HONG DUC

# of Collaborated Projects: 2 results

# of Collaborated Products: 6 results
8. AIHARA T (90006172)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. SAITOH T (80064161)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. TODA S (60005387)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. OHTA T (00006678)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. NAGAI N (90005231)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. FUKUSAKO Shoichiro (00001785)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. HAYASHI Yujiro (30019765)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. SAITO Akio (40020432)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. NAKAYAMA Wataru (50221461)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. TAKEUCHI Masaaki (70163384)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. UCHIDA Yutaka (00017336)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. 増田英俊 (00006181)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. NISHIO Taichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SATOH ISAO 佐藤 勲

SATOH Isao 佐藤 勲

黒崎 晏夫 クロサキ ヤスオ

Research Projects

Research Products

Co-Researchers

Space-time concentration of unused thermal energy by using adsorption heat storage and its application to temperature control of mold in polymer injection molding processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

過渡レンズ効果を用いた液体光学素子開発と応用Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Reduction of Energy Consumption for Mold-Temperature Control Using an Adsorption Heat Storage Material Inclusion MoldPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Progressive Reduction Method of Energy Consumption for Mold-Temperature Control by Utilizing Waste Heat from the Polymer Injection-Molding ProcessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Novel Forming Method of Micro Surface Texture on Polymer Products Utilizing Self-Organization-Like Auto-TransformationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Embodiment of the Separation/Distinction Method for Polymer Waste Materials by Utilizing Melt-Sticking PhenomenaPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

工学的応用展開を見据えた固体間融着機構と熱的制御手法の検討Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Basic Study on Material Selection Process from Waste Polymers Utilizing Unsteady Heat ConductionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Microscale Property Control on Polymer films by Utilizing Interfering Laser HeatingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

SATOH ISAO 佐藤勲

SATOH Isao 佐藤勲

黒崎晏夫クロサキヤスオ