Kuramoto Shigeru 倉本繁

… Alternative Names

KURAMOTO Shgeru 倉本繁

倉本繁クラモトシゲル

KURAMOTO Shigeru 倉本繁

Less

Researcher Number	10292773
Other IDs
External Links
Affiliation (Current)	2025: 茨城大学, 応用理工学野, 教授
Affiliation (based on the past Project Information) *help	2018 – 2024: 茨城大学, 理工学研究科(工学野), 教授 2017: 茨城大学, 工学部, 教授 2014: 茨城大学, 工学部, 教授 2013: 株式会社豊田中央研究所, 材料・プロセス1部軽金属材料・プロセス研究室, 主任研究員 2013: 株式会社豊田中央研究所, 材料･プロセス1部軽金属材料・プロセス研究室, 主任研究員 … More 2012: 株式会社豊田中央研究所, 材料プロセス研究部・軽金属材料プロセス研究室, 主任研究員 2010: 株式会社豊田中央研究所, 先端研究センター・先端研究統括室・フロンティア研究部門・倉本研究グループ, リーダ・主任研究員 2009: Toyota Central R&D Lab., Inc., 先端研究センターフロンティア研究部門倉本研究グループ, リーダ・主任研究員 2000 – 2001: 東京大学, 大学院・工学系研究科, 助手 Less
Review Section/Research Field	Principal Investigator Structural/Functional materials / Inorganic materials/Physical properties Except Principal Investigator Structural/Functional materials / Basic Section 26050:Material processing and microstructure control-related / Basic Section 26040:Structural materials and functional materials-related / Material processing/Microstructural control engineering
Keywords	Principal Investigator 結晶粒界 / 結晶粒微細化 / 冷間加工 / ナノ組織 / 加工 / 金属材料 / 理想強度 / 構造・機能材料 / 強度・破壊靭性 / マグネシウム合金 … More / ナノクラスタ / アルミニウム合金 / 高強度化 / 変態 / 強加工 / 弾性異常 / 半導体 / 電気化学的水素透過法 / 水素マイクロプリント法 / 拡散 / 水素 / シリコン … More Except Principal Investigator アルミニウム合金 / 粒界 / A7075 / 応力腐食割れ / 水素脆化 / 接合界面 / 透過型電子顕微鏡 / その場観察 / 超音波接合 / 弾性反跳粒子検出 / 金属材料 / 水素化チタン / 水素化アルミニウム / 弾性反跳粒子検出法 / 2相ステンレス鋼 / 水素マイクロプリント / すべり帯 / 変形帯 / 水素誘起欠陥 / 塑性変形 / 純鉄 / トリチウムオートラジオグラフィ / 可視化 / 水素 / 組織制御 / 析出 / 無析出帯 / 焼入れ / 粒界析出 / ひずみ誘起粒界移動 / ステップクェンチ処理 / 粒界形状制御 / 析出組織制御 / 結晶粒界 / 析出強化 / 強度 / 水素脆性 / 粒内 / 時効析出 / 7000系アルミニウム合金 / hydrogen / sulfur / intermediate temperature embrittlement / trace impurity / grain boundary cracking / Ch-Ni-Si alloy / 拡散挙動 / Cu-Fe系合金 / 工業用純銅 / 高温延性と水素 / リードフレーム用銅合金 / 微量添加元素 / 電子材料用銅基合金 / 中間温度脆性 / 微量不純物 / 粒界割れ / Cu-Ni-Si系合金 / coarse grained alloy / stress corrosion cracking / slow strain rate tensite test / grain boundary fracture / duetrium / hydrogen embrittlement / high strength aluminum alloy / 質量分析計 / 粗粒合金 / 低歪速度引張試験 / 粒界破壊 / 重水素 / 高力アルミニウム合金 Less

超音波誘起格子欠陥の成因解明と制御
- Principal Investigator
  
  岩本知広
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Ibaraki University
Analysis on the sites of existence and paths of migration for hydrogen in metallic materials for structural use by means of some visualization techniques
- Principal Investigator
  
  Itoh Goroh
- Project Period (FY)
  2020 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Ibaraki University
Improvement of reliability of aluminum alloys by controlling the microstructure of grain-boundary precipitates
- Principal Investigator
  
  ITOH Goroh
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Ibaraki University
Suppression of environmental embrittlement in cold worked aluminum alloys with deformation-induced nano clustersPrincipal Investigator
- Principal Investigator
  
  Kuramoto Shigeru
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ibaraki University
Strengthening magnesium alloys by deformation-induced nano clustersPrincipal Investigator
- Principal Investigator
  
  KURAMOTO Shgeru
- Project Period (FY)
  2013 – 2014
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ibaraki University
  Toyota Central R&D Lab., Inc.
Strengthening metallic materials with fcc crystal sturcture up to ideal strengthPrincipal Investigator
- Principal Investigator
  
  KURAMOTO Shgeru
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ibaraki University
  Toyota Central R&D Lab., Inc.
弾性異常合金の理論強度までの高強度化Principal Investigator
- Principal Investigator
  
  倉本繁
- Project Period (FY)
  2009 – 2010
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyota Central R&D Lab., Inc.
半導体シリコン中の水素の拡散挙動の解明Principal Investigator
- Principal Investigator
  
  倉本繁
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Inorganic materials/Physical properties
- Research Institution
  The University of Tokyo
Inhibition of grainboundary cacking in copper-base alloys used in electronic industries
- Principal Investigator
  
  KANNO Kanno
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  The University of Tokyo
Study on Hydrogen Embrittlement of High Strength Aluminium Alloys
- Principal Investigator
  
  KANNO Motohiro
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  The University of Tokyo

All 2024 2022 2021 2020 2019 2018 2017 2014 2013 2012 2010 2009 Other

All Journal Article Presentation

[Journal Article] Visualization of Hydrogen and Hydrogen-induced Defects in Tensile-deformed Pure Iron Using Hydrogen Microprint and Tritium Autoradiography2024
- Author(s)
  Manaka Toshiaki、Itoh Goroh、Kobayashi Junya、Kuramoto Shigeru、Hatano Yuji
- Journal Title
  
  ISIJ International
  
  Volume: 64 Issue: 4 Pages: 655-659
- DOI
  10.2355/isijinternational.ISIJINT-2023-279
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2024-02-28
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05128
[Journal Article] Effect of strain rate on environmental hydrogen embrittlement susceptibility of a severely cold-rolled Al?Cu alloy2020
- Author(s)
  Safyari Mahdieh、Moshtaghi Masoud、Kuramoto Shigeru
- Journal Title
  
  Vacuum
  
  Volume: 172 Pages: 109057-109057
- DOI
  10.1016/j.vacuum.2019.109057
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03406
[Journal Article] Influence of cold rolling on strength and resistance to hydrogen embrittlement in Al–8%Zn–2%Mg–2%Cu–0.15%Zr alloy2019
- Author(s)
  Tadenuma Hiroki、Kuramoto Shigeru、Kobayashi Junya、Itoh Goroh、Aoi Ichiro、Shimizu Yoshihiro
- Journal Title
  
  Journal of Japan Institute of Light Metals
  
  Volume: 69 Issue: 6 Pages: 312-314
- DOI
  10.2464/jilm.69.312
- NAID
  130007684577
- ISSN
  0451-5994, 1880-8018
- Year and Date
  2019-06-25
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03406
[Journal Article] Effect of test environment on tensile properties of cold-rolled 7075 aluminum alloy2018
- Author(s)
  Nakajima Yuki、Kuramoto Shigeru、Kobayashi Junya、Itoh Goroh、Oh-ishi Keiichiro、Aoi Ichiro、Shimizu Yoshihiro
- Journal Title
  
  Journal of Japan Institute of Light Metals
  
  Volume: 68 Issue: 11 Pages: 621-626
- DOI
  10.2464/jilm.68.621
- NAID
  130007543302
- ISSN
  0451-5994, 1880-8018
- Year and Date
  2018-11-30
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17H03406
[Journal Article] 7075合金の機械的特性と金属組織に及ぼす巨大ひずみ加工の影響2014
- Author(s)
  倉本繁、堀渕嘉代、青井一郎、大石敬一郎
- Journal Title
  
  軽金属
  
  Volume: 64
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] HUMID-GAS STRESS CORROSION CRACKING BEHAVIOR IN SOME MEDIUM-STRENGTH ALUMINUM ALLOYS2022
- Author(s)
  Goroh ITOH, Alireza GHORANI, Akira KURUMADA, Shigeru KURAMOTO, Junya KOBAYASHI and Takeshi OGAWA
- Organizer
  The 18th International Conference on Aluminium Alloys (ICAA18)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマ照射したAl-Ti合金およびアルミニウムにおける金属水素化物生成2022
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  一般社団法人軽金属学会第142回春期大会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマによるアルミニウム水素化物生成に及ぼすプラズマ照射条件の影響2022
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  一般社団法人軽金属学会第143回秋期大会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] Synthesis of aluminum hydride by hydrogen plasma irradiation2022
- Author(s)
  Tomoharu OUCHI, Goroh ITOH, Naoyuki SATO, Shigeru KURAMOTO and Junya KOBAYASHI
- Organizer
  The 18th International Conference on Aluminium Alloys (ICAA18)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマ照射したAl-Ti合金およびアルミニウムにおける金属水素化物生成2022
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  軽金属学会第142回春期大会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] 水素プラズマ照射によるAl-5%Ti合金の水素化物合成2021
- Author(s)
  大内智晴, 伊藤吾朗, 佐藤直幸, 倉本繁, 小林純也
- Organizer
  日本機械学会関東支部・精密工学会・茨城大学工学部共催第29回茨城講演会
- Data Source
  KAKENHI-PROJECT-20K05128
[Presentation] SQ処理条件制御によるAl-Zn-Mg-Cu合金の耐水素脆化特性改善の試み2020
- Author(s)
  檜山佳祐，伊藤吾朗，小林純也，倉本繁
- Organizer
  一般社団法人軽金属学会第138回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Mg-Si系合金の機械的特性に及ぼす冷間圧延の影響2019
- Author(s)
  三浦琢真，倉本繁，伊藤吾朗，小林純也
- Organizer
  軽金属学会第136回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 焼入れ条件制御したAl-Zn-Mg-Cu合金板材の耐SCC性に及ぼす粒界析出組織の影響2019
- Author(s)
  檜山佳祐，伊藤吾朗，倉本繁
- Organizer
  一般社団法人軽金属学会第137 回秋期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] 焼入れ条件制御によるAl-Zn-Mg-Cu合金の耐SCC特性改善の試み2019
- Author(s)
  檜山佳祐，赤羽剛希，伊藤吾朗，石澤真悟，倉本繁
- Organizer
  一般社団法人軽金属学会第136回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Suppression of environmental hydrogen embrittlement by severe cold rolling in Al-Zn- Mg-Cu-Cr alloy with high amount of zinc2019
- Author(s)
  Mahdieh Safyari， Junya Kobayashi， Shigeru Kuramoto， Goroh Itoh
- Organizer
  軽金属学会第136回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Effect of solution treatment on mechanical properties and hydrogen embrittlement behavior of severely cold-rolled Al-alloys2019
- Author(s)
  Mahdieh Safyari， Junya Kobayashi， Shigeru Kuramoto， Goroh Itoh
- Organizer
  軽金属学会第137回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 焼入れ条件制御によるAl-Zn-Mg-Cu合金の耐SCC特性改善の試み2019
- Author(s)
  檜山佳祐，赤羽剛希，伊藤吾朗，石澤真悟，倉本繁
- Organizer
  一般社団法人軽金属学会第136回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Mg-Si系合金冷間圧延材の機械的特性に及ぼす合金組成の影響2019
- Author(s)
  三浦琢真，倉本繁，伊藤吾朗，小林純也
- Organizer
  軽金属学会第137回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu系合金冷間圧延材の引張特性に及ぼす試験環境の影響2018
- Author(s)
  豊田章嵩，藤澤竜星，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-8%Zn-2%Mg-2%Cu-0.15%Zr合金の耐水素脆化特性に及ぼす冷間圧延の影響2018
- Author(s)
  蓼沼宏樹，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu-Mg系合金の耐水素脆化特性に及ぼす冷間圧延の影響2018
- Author(s)
  藤澤竜星，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 粒界の形状制御による7075アルミニウム合金の粒界割れ抑制2018
- Author(s)
  中島迪久，伊藤吾朗，倉本繁，小林純也
- Organizer
  一般社団法人軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Cu-Mg系合金冷間圧延材の耐水素脆化特性2018
- Author(s)
  藤澤竜星，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 粒界の形状制御による7075アルミニウム合金の粒界割れ抑制2018
- Author(s)
  中島迪久、伊藤吾朗、倉本繁、小林純也
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] 冷間圧延したAl-8%Zn-2%Mg-2%Cu-0.15%Zr合金の耐水素脆性2018
- Author(s)
  蓼沼宏樹，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 7075アルミニウム合金のSSRT引張特性に及ぼすひずみ誘起粒界移動の影響2018
- Author(s)
  中島迪久，伊藤吾朗，倉本繁，小林純也
- Organizer
  一般社団法人軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Zn-Mg合金の耐水素脆化特性に及ぼすステップ・クェンチ処理の影響2018
- Author(s)
  赤羽剛希，石澤真悟，伊藤吾朗，倉本繁
- Organizer
  一般社団法人軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Zn-Mg-Cu合金の耐水素脆化特性に及ぼすステップ・クェンチ処理の影響2018
- Author(s)
  赤羽剛希、石澤真悟、伊藤吾朗、倉本繁
- Organizer
  軽金属学会第134回春期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-8%Zn-2%Mg-2%Cu-0.2%Cr合金の機械的性質と水素脆化感受性に及ぼす強冷間圧延の影響2018
- Author(s)
  サフィヤリマディエ，蓼沼宏樹，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] SQ処理によるAl-Zn-Mg合金の粒界析出組織制御が耐水素脆化特性に及ぼす影響2018
- Author(s)
  赤羽剛希，石澤真悟，伊藤吾朗，倉本繁
- Organizer
  一般社団法人軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Cu系合金冷間圧延材の耐水素脆化性2018
- Author(s)
  豊田章嵩，小林純也，倉本繁，伊藤吾朗
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] 冷間圧延したAl-8%Zn-2%Mg-2%Cu-0.15%Zr合金の引張特性2017
- Author(s)
  蓼沼宏樹，中島祐樹，小林純也，倉本繁，伊藤吾朗，青井一郎，清水吉広
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu-Mg系合金冷間圧延材の引張特性2017
- Author(s)
  藤澤竜星，中島祐樹，倉本　繁
- Organizer
  軽金属学会第132回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Cu-Mg系合金冷間圧延材の引張特性に及ぼす圧下率の影響2017
- Author(s)
  藤澤竜星，中島祐樹，小林純也，倉本　繁，伊藤吾朗
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Zn-Mg合金冷間圧延材の耐水素脆化性2017
- Author(s)
  中島祐樹，倉本　繁，青井一郎，清水吉広
- Organizer
  軽金属学会第132回春期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Al-Zn-Mg合金の耐水素脆化特性に及ぼす焼入れ条件の影響2017
- Author(s)
  赤羽剛希、石澤真悟、伊藤吾朗、倉本繁
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17K06854
[Presentation] Al-Zn-Mg合金冷間圧延材の耐水素脆化性に及ぼす加工率の影響2017
- Author(s)
  中島祐樹，小林純也，倉本　繁，伊藤吾朗，青井一郎，清水吉広
- Organizer
  軽金属学会第133回秋期大会
- Data Source
  KAKENHI-PROJECT-17H03406
[Presentation] Mechanical Properties of Al-Zn-Mg-Cu Alloys Processed with High-press2013
- Author(s)
  倉本繁
- Organizer
  TMS
- Place of Presentation
  サンアントニオゴンサレス会議場(テキサス州、米国)
- Year and Date
  2013-03-03
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Al-Zn-Mg-Cu系合金HPT加工材の硬さに及ぼす自然時効の影響2012
- Author(s)
  倉本繁
- Organizer
  軽金属学会
- Place of Presentation
  千葉工大(千葉県)
- Year and Date
  2012-11-11
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Al-Zn-Mg系合金HPT加工材の強度に及ぼす組成の影響2012
- Author(s)
  倉本繁
- Organizer
  軽金属学会
- Place of Presentation
  九州大(福岡県)
- Year and Date
  2012-05-20
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Al-Zn-Mg(-Cu)系合金HPT加工材の引張特性2012
- Author(s)
  倉本繁
- Organizer
  日本金属学会
- Place of Presentation
  愛媛大(愛媛県)
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Mn-Cu系合金HPT材の機械的特性に及ぼす組成の影響2010
- Author(s)
  倉本繁、長廻尚之、古田忠彦、堀田善治
- Organizer
  日本金属学会
- Place of Presentation
  北海道大学(北海道)
- Year and Date
  2010-09-27
- Data Source
  KAKENHI-PROJECT-21656179
[Presentation] 強加工したMn-Cu系合金の機械的特性2010
- Author(s)
  倉本繁、長廻尚之、古田忠彦
- Organizer
  日本金属学会
- Place of Presentation
  筑波大学(茨城県)
- Year and Date
  2010-03-30
- Data Source
  KAKENHI-PROJECT-21656179
[Presentation] Mn-Cu系合金の相安定性と機械的特性2009
- Author(s)
  倉本繁、石崎敏孝、長廻尚之、古田忠彦
- Organizer
  日本金属学会
- Place of Presentation
  京都大学(京都府)
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-21656179
[Presentation] 巨大ひずみ加工による7075合金の組織変化
- Author(s)
  倉本繁、堀渕嘉代、青井一郎
- Organizer
  軽金属学会
- Place of Presentation
  横浜国大（神奈川県）
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] アルミニウム合金HPT加工材の高強度化に及ぼすひずみ量の影響
- Author(s)
  倉本繁、青井一郎、古田忠彦
- Organizer
  軽金属学会
- Place of Presentation
  富山大（富山県）
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Mechanical Properties of Al-(8, 10%)Zn-2%Mg-2%Cu Base Alloys Processed with High-Pressure Torsion
- Author(s)
  I.Aoi, S.Kuramoto and K.Oh-ishi
- Organizer
  TMS 2015
- Place of Presentation
  Walt Disney World, Orland, FL, USA
- Year and Date
  2015-03-15 – 2015-03-19
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Al-Zn-Mg系合金HPT加工材の機械的特性に及ぼす加工前プロセスの影響
- Author(s)
  青井一郎,倉本繁,大石敬一郎
- Organizer
  軽金属学会
- Place of Presentation
  東京工業大学
- Year and Date
  2014-11-15 – 2014-11-16
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] Al-Zn-Mg-Cu-Cr系合金HPT加工材の機械的特性
- Author(s)
  青井一郎、倉本繁、古田忠彦
- Organizer
  軽金属学会
- Place of Presentation
  富山大（富山県）
- Data Source
  KAKENHI-PROJECT-24360297
[Presentation] MICROSTRUCTURES AND MECHANICAL PROPERTIES OF Mg-1at%X ALLOYS PROCESSED WITH HIGH-PRESSURE TORSION
- Author(s)
  Hiroyuki Kawabata, Shigeru Kuramoto, Keiichiro Oh-ishi
- Organizer
  TMS 2015
- Place of Presentation
  Walt Desney World, Orland, FL, USA
- Year and Date
  2015-03-15 – 2015-03-19
- Data Source
  KAKENHI-PROJECT-25630313

1. ITOH Goroh (80158758)

# of Collaborated Projects: 3 results

# of Collaborated Products: 31 results
2. 小林純也 (20735104)

# of Collaborated Projects: 3 results

# of Collaborated Products: 24 results
3. KANNO Motohiro (60011128)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. TAKAO Hisaaki (00394718)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. 岩本知広 (60311635)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. AOI Ichro (80318782)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
7. FURUTA Tadahiko (40394506)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
8. OHSUNA Tetsu (60271962)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. HORIBUCHI Kayo (30394993)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
10. KAWABATA Hiroyuki (40394936)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
11. NISHI Seiji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Kuramoto Shigeru 倉本 繁

KURAMOTO Shgeru 倉本 繁

倉本 繁 クラモト シゲル

KURAMOTO Shigeru 倉本 繁

Research Projects

Research Products

Co-Researchers

超音波誘起格子欠陥の成因解明と制御

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Analysis on the sites of existence and paths of migration for hydrogen in metallic materials for structural use by means of some visualization techniques

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Improvement of reliability of aluminum alloys by controlling the microstructure of grain-boundary precipitates

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Suppression of environmental embrittlement in cold worked aluminum alloys with deformation-induced nano clustersPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Strengthening magnesium alloys by deformation-induced nano clustersPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Strengthening metallic materials with fcc crystal sturcture up to ideal strengthPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

弾性異常合金の理論強度までの高強度化Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

半導体シリコン中の水素の拡散挙動の解明Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Inhibition of grainboundary cacking in copper-base alloys used in electronic industries

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Hydrogen Embrittlement of High Strength Aluminium Alloys

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Visualization of Hydrogen and Hydrogen-induced Defects in Tensile-deformed Pure Iron Using Hydrogen Microprint and Tritium Autoradiography2024

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Effect of strain rate on environmental hydrogen embrittlement susceptibility of a severely cold-rolled Al?Cu alloy2020

Author(s)

Journal Title

DOI

Data Source

Kuramoto Shigeru 倉本繁

KURAMOTO Shgeru 倉本繁

倉本繁クラモトシゲル

KURAMOTO Shigeru 倉本繁