SAITO Akinori 齋藤明徳

… Alternative Names

齋藤明徳サイトウアキノリ

齊藤明徳サイトウアキノリ

斎藤明徳サイトウアキノリ

Less

Researcher Number	10334476
Other IDs
External Links
Affiliation (Current)	2025: 日本大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2014 – 2016: 日本大学, 工学部, 教授 2005 – 2006: 日本大学, 工学部, 助教授 2003 – 2004: 松江工業高等専門学校, 助教授 2003 – 2004: 松江工業高等専門学校, 機械工学科, 助教授 2001 – 2002: Assistant, 大学院・生物システム応用科学研究科, 助手 2001: 東京農工大学, 生物システム応用科学研究科, 助手
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 Except Principal Investigator Production engineering/Processing studies / 機械工作・生産工学
Keywords	Principal Investigator 幾何偏差 / 5軸マシニングセンタ / 画像処理 / 検査 / 測定 / スペックルパターン / 位置決め精度 / レーザスペックル / マシニングセンタ / 画像照合 … More / 位置決め / 工作機械 / CAM / 加工精度 / 運動精度 / キャリブレーション / ボールバー法 … More Except Principal Investigator マシニングセンタ / geometric deviation / 主軸頭旋回形 / テーブル旋回形 / 幾何偏差 / 5軸制御マシニングセンタ / 多軸制御工作機械 / simultaneous five-axis control / simultaneous two-axis control / servo error / pitch error / five-axis controlled machining centers / multi-axis machine tools / ボールバー / 同期精度 / 運動精度 / 5軸制御 / 同時5軸制御 / 同時2軸制御 / サーボ誤差 / 機構誤差 / multi-tasking machine / rotary axis / compensation method / identification method / five-axis machining center / multi-axis machine tool / 幾何精度 / 同定 / 機構解析 / 5軸 / 複合加工機 / 旋回軸 / 補正方法 / 同定方法 / mold / tool path / machining center / ball-end-mill / surface finish / 金型 / 工具経路 / ボールエンドミル / 仕上げ面 Less

Development of daily performance test for degradation prevention of machining centersPrincipal Investigator
- Principal Investigator
  
  SAITO Akinori
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nihon University
Accuracy prediction of workpieces considering machine errors of multi-axis machine tools and its identification
- Principal Investigator
  
  TSUTSUMI Masaomi
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
5軸制御マシニングセンタの加工精度補償に関する研究Principal Investigator
- Principal Investigator
  
  齋藤明徳
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nihon University
  Matsue National College of Technology
Identification and compensation of the deviations inherent to multi-axis machine tools
- Principal Investigator
  
  TSUTSUMI Masaomi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  National University Corporation Tokyo University of Agriculture and Technology
5軸制御マシニングセンタの運動精度測定方法の開発Principal Investigator
- Principal Investigator
  
  斎藤明徳 (齋藤明徳)
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Matsue National College of Technology
  Tokyo University of Agriculture and Technology
Generating Regular Patterns on Mold Surface by 5-Axis control Ball-End Milling
- Principal Investigator
  
  TSUTSUMI Masaoni, 趙暁明
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo University of Agriculture and Technology

All 2016 2015 2006 2004 2003 Other

All Journal Article Presentation

[Journal Article] 5軸マシニングセンタの静的精度測定方法-ISO10791-6のK6の有効性とその応用2006
- Author(s)
  堤正臣, M.Dassanayake, 齊藤明徳
- Journal Title
  
  日本機械学会論文集C編 72・715
  
  Pages: 916-922
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] Measurement method for geometric deviations for five-axis machining centers (a method by means of a ball and a linear displacement sensor)2006
- Author(s)
  K.Utsumi, T.Kosugi, A.Saito, M.Tsutsumi
- Journal Title
  
  Transaction of Japan Society for Mechanical Engineers vol.72
  
  Pages: 3672-3678
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] 5軸制御工作機械の静的精度測定方法(球と変位計とを用いた測定方法)2006
- Author(s)
  内海敬三, 小杉達寛, 齋藤明徳, 堤正臣
- Journal Title
  
  日本機械学会論文集 72
  
  Pages: 2293-2298
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] 5軸制御マシニングセンタの静的精度測定方法(ISO 17091-6のK6の有効性とその応用)2006
- Author(s)
  堤正臣, K.M.Muditha Dassanayake, 齊藤明徳, 三上滋崇
- Journal Title
  
  日本機械学会論文集 72
  
  Pages: 916-922
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] A strategy for identifying static deviations in universal spindle head type multi-axis machining centers2006
- Author(s)
  K.M.Muditha Dassanayake, Masaomi Tsutsumi, Akinori Saito
- Journal Title
  
  International Journal of Machine Tools and Manufacture vol.46
  
  Pages: 1097-1106
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] 同時5軸制御による主軸頭旋回形5軸制御マシニングセンタの幾何偏差同定方法2006
- Author(s)
  堤正臣, 山元健, 齊藤明徳, K.M.Muditha Dassanayake
- Journal Title
  
  日本機械学会論文集 72
  
  Pages: 3679-3686
- NAID
  110004997446
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] マシニングセンタの同時5軸制御運動に及ぼす幾何精度の影響2006
- Author(s)
  山元健, 堤正臣, 齊藤明徳
- Journal Title
  
  日本機械学会九州支部講演論文集 068-1
  
  Pages: 177-178
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] Measurement method for geometric deviations in five-axis machine tools (Effectiveness of the clause K6 in ISO10791-6 and its application)2006
- Author(s)
  M.Tsutsumi, K.M.M.Dassanayake, A.Saito, S.Mikami
- Journal Title
  
  Transaction of Japan Society for Mechanical Engineers vol.72
  
  Pages: 916-922
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] Identifying method of geometric deviations in five-axis machining centers with a tilting rotary table2006
- Author(s)
  M.Tsutsumi, K.Yamamot, A.Saito, K.M.M.Dassanayake
- Journal Title
  
  Transaction of Japan Society for Mechanical Engineers vol.72
  
  Pages: 3679-3686
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] A strategy for identifying static deviations in universal spindle head type multi-axis machining centers2006
- Author(s)
  K.M.Muditha Dassanayake, Masaomi Tsutsumi, Akinori Saito
- Journal Title
  
  International Journal of Machine Tools and Manufacture 46
  
  Pages: 1097-1106
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360059
[Journal Article] Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting rotary table by means of four axis control movements2004
- Author(s)
  M.Tsutsumi, A.Saito
- Journal Title
  
  Int.J.of Machine Tools and Manufacture 44
  
  Pages: 1333-1342
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360066
[Journal Article] Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements2004
- Author(s)
  Masaomi TSUTSUMI, Akinori SAITO
- Journal Title
  
  International Journal of Machine Tools and Manufacture Vol.44
  
  Pages: 1333-1342
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360066
[Journal Article] 球と変位計を用いた5軸制御マシニングセンタ幾何精度測定方法2004
- Author(s)
  小杉達寛, 内海敬三, 堤正臣, 齋藤明徳
- Journal Title
  
  第5回日本機械学会生産加工・工作機械部門講演論文集
  
  Pages: 151-152
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360066
[Journal Article] Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements2004
- Author(s)
  Masaomi TSUTSUMI, Akinori SAITO
- Journal Title
  
  International Journal of Machine Tools and Manufacture 44
  
  Pages: 1333-1342
- Data Source
  KAKENHI-PROJECT-15360066
[Journal Article] Measurement method of geometric accuracy of five-axis control machining center by means of ball and displacement sensor2004
- Author(s)
  Hirotatsu Kosugi, Keizo Utsumi, Masaomi TSUTSUMI, Akinori Saito
- Journal Title
  
  Proceedings of Machine Tool and Manufacturing Devision, JSME Conference
  
  Pages: 151-152
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360066
[Journal Article] General calibration methods of 5-axis controlled machining centers according to the structural configurations2003
- Author(s)
  A.Saito, M.Tsutsumi, et al.
- Journal Title
  
  Proc.Inter.Conf.on Leading Edge Manufacturing 1
  
  Pages: 607-612
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360066
[Journal Article] General calibration methods of 5-axis controlled machining centers according to the structural configurations2003
- Author(s)
  S.Sisavath, S.Mikami, A.Saito, M.Tsutsumi
- Journal Title
  
  Proceedings of International Conference on Leading Edge Manufacturing in Niigata
  
  Pages: 607-612
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360066
[Presentation] 3-dimensional measurement of positioning accuracy of machine tools by using image matching2016
- Author(s)
  Yousuke Shiota, Yoshiki Kobayashi, Youji Jinba, Akinori Saito
- Organizer
  International Machine Tool Engineer’s Conference
- Place of Presentation
  東京ビックサイト
- Year and Date
  2016-11-01
- Data Source
  KAKENHI-PROJECT-26420060
[Presentation] 画像照合による工作機械の位置決め精度の3次元測定2016
- Author(s)
  齋藤明徳，権田隼
- Organizer
  精密工学会秋季大会
- Place of Presentation
  茨城大学
- Data Source
  KAKENHI-PROJECT-26420060
[Presentation] 画像照合による工作機械の位置決め精度の簡易測定2015
- Author(s)
  齋藤明徳，権田隼
- Organizer
  精密工学会
- Place of Presentation
  東北大学
- Year and Date
  2015-09-05
- Data Source
  KAKENHI-PROJECT-26420060
[Presentation] 画像照合による工作機械の位置決め精度測定の試み2015
- Author(s)
  齋藤明徳
- Organizer
  精密工学会生産自動化専門委員会
- Place of Presentation
  中央大学理工学部
- Year and Date
  2015-01-30
- Invited
- Data Source
  KAKENHI-PROJECT-26420060
[Presentation] Measurement of the Positioning Accuracy of Machine Tools using Image Matching
- Author(s)
  Harunobu Kasama, Takeshi Kanno, Akinori Saito
- Organizer
  International Machine Tool Engineers’ Conference
- Place of Presentation
  東京ビックサイト
- Year and Date
  2014-10-30 – 2014-11-04
- Data Source
  KAKENHI-PROJECT-26420060

1. TSUTSUMI Masaoni (90108217)

# of Collaborated Projects: 4 results

# of Collaborated Products: 17 results
2. SASAHARA Hiroyuki (00205882)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. 趙暁明 (10293010)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SAITO Akinori 齋藤 明徳

齋藤 明徳 サイトウ アキノリ

齊藤 明徳 サイトウ アキノリ

斎藤 明徳 サイトウ アキノリ

Research Projects

Research Products

Co-Researchers

Development of daily performance test for degradation prevention of machining centersPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Accuracy prediction of workpieces considering machine errors of multi-axis machine tools and its identification

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

5軸制御マシニングセンタの加工精度補償に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Identification and compensation of the deviations inherent to multi-axis machine tools

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

5軸制御マシニングセンタの運動精度測定方法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Generating Regular Patterns on Mold Surface by 5-Axis control Ball-End Milling

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 5軸マシニングセンタの静的精度測定方法-ISO10791-6のK6の有効性とその応用2006

Author(s)

Journal Title

Data Source

[Journal Article] Measurement method for geometric deviations for five-axis machining centers (a method by means of a ball and a linear displacement sensor)2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] 5軸制御工作機械の静的精度測定方法(球と変位計とを用いた測定方法)2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] 5軸制御マシニングセンタの静的精度測定方法(ISO 17091-6のK6の有効性とその応用)2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] A strategy for identifying static deviations in universal spindle head type multi-axis machining centers2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] 同時5軸制御による主軸頭旋回形5軸制御マシニングセンタの幾何偏差同定方法2006

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] マシニングセンタの同時5軸制御運動に及ぼす幾何精度の影響2006

Author(s)

Journal Title

Data Source

[Journal Article] Measurement method for geometric deviations in five-axis machine tools (Effectiveness of the clause K6 in ISO10791-6 and its application)2006

Author(s)

Journal Title

SAITO Akinori 齋藤明徳

齋藤明徳サイトウアキノリ

齊藤明徳サイトウアキノリ

斎藤明徳サイトウアキノリ