Uesugi Tokuteru 上杉徳照

… Alternative Names

上杉徳照ウエスギトクテル

UESUGI Tokuteru 上杉徳照

上杉トクテルウエスギトクテル

Less

Researcher Number	10405342
Other IDs	https://orcid.org/0000-0002-9246-3170
Affiliation (Current)	2025: 大阪公立大学, 大学院情報学研究科 , 教授
Affiliation (based on the past Project Information) *help	2023: 大阪公立大学, 大学院情報学研究科, 准教授 2017 – 2018: 大阪府立大学, 工学(系)研究科(研究院), 准教授 2017: 大阪府立大学, 大学院・工学研究科, 准教授 2016: 大阪府立大学, 大学院・工学研究科, 助教 2014 – 2016: 大阪府立大学, 工学(系)研究科(研究院), 講師 … More 2010: 大阪府立大学, 工学研究科, 助教 2007 – 2008: 大阪府立大学, 工学研究科, 助教 2005 – 2006: 大阪府立大学, 工学研究科, 助手 Less
Review Section/Research Field	Principal Investigator Basic Section 26040:Structural materials and functional materials-related / Material processing/Microstructural control engineering Except Principal Investigator Structural/Functional materials / Science and Engineering / Composite materials/Surface and interface engineering / Material processing/treatments
Keywords	Principal Investigator 第一原理計算 / 体積変化 / 格子変形ひずみ / エンタルピー差 / 機械学習 / 形状記憶合金 / 粒界強化 / 高延性 / 高強度 / Al合金 … More Except Principal Investigator … More 第一原理計算 / 固溶強化 / 相変態 / 機械的性質 / 低Ａｇはんだ / Agレスはんだ / 低Agはんだ / 鉛フリーはんだ / 細胞毒性 / 高強度 / 変形双晶誘起塑性 / ロッド / 高強度化 / 脊柱矯正器具 / ヤング率自己調整 / 低弾性率 / β型チタン合金 / 力学的特性 / 異方性 / ユビキタス元素 / 生体用金属材料 / 圧電体 / 相安定性 / ドメイン構造 / 圧電材料 / 高機能化 / 長寿命化 / マイクロ試験 / ホモ界面 / ドメイン / 構造・機能材料 / 微小材料試験 / 機械学習 / ドメインホモ界面 / 強誘電体 / 磁性形状記憶合金 / 形状記憶合金 / 多機能材料 / 医療・エネルギー材料 / 界面制御 / 形状可変材料 / マグネシウム合金 / アルミニウム合金 / 動的再結晶 / 微細ナノ粒子 / 異常粒成長 / 結晶粒径 / 摩擦攪拌接合 / 粒界性格分布 / 結晶・組織制御 / Grain-Subdivision / 電子構造 / Grain-subdivision / 点欠陥 / 溶質 / 転位 / 結晶粒界 / 均一変形 / 局部変形 / アモルファス / 伸び値 / 結合状態 / 放射光 / 弾性特異点 / 破壊靱性 / 準結晶 / 超塑性 / 過冷却液体 / EXAFS / 摩擦攪拌プロセス / せん断帯 / 変形メカにクス / 結合距離 / その場観察 / 高エネルギーX線 / 電解析出法 / 摩擦攬拌プロセス / ナノ結晶 / 変形メカニクス / 金属ガラス Less

Uncovering the origin and theoretical design of shape memory alloys by machine learning and first-principles calculationsPrincipal Investigator
- Principal Investigator
  
  上杉徳照
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Osaka Metropolitan University
Development of aluminum alloys excellent in strength and ductility based on first-principles calculationsPrincipal Investigator
- Principal Investigator
  
  Uesugi Tokuteru
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Osaka Prefecture University
Development of low-Ag solder alloy with excellent creep resistance utilizing constitutive equation
- Principal Investigator
  
  Hamada Naoyuki
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Composite materials/Surface and interface engineering
- Research Institution
  Osaka Research Institute of Industrial Science and Technology
Quest for fundamental dynamics of domain homo interface in shape change materials and principles for high performance materials
- Principal Investigator
  
  HOSODA Hideki
- Project Period (FY)
  2014 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
Analysis of mechanism of peculiar high strength and ductility of metastable beta-type titanium alloy with high oxygen content for structural biomaterials
- Principal Investigator
  
  NIINOMI MITSUO
- Project Period (FY)
  2012 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Meijo University
  Tohoku University
Analysis of effects of fine nanoparticles and grain boundary character distribution on abnormal grain growth in friction stir welded material
- Principal Investigator
  
  HIRATA Tomotake
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Industrial Research Institute of Osaka Prefecture
Understanding and designing of high-density lattice defect (HDLD) materials using electronic theory of solids
- Principal Investigator
  
  KOHYAMA Masanori
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  National Institute of Advanced Industrial Science and Technology
金属ガラスの変形・破壊のその場観察と原子レベルでのメカニクス解明
- Principal Investigator
  
  HIGASHI Kenji
- Project Period (FY)
  2003 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Osaka Prefecture University

All 2024 2023 2019 2018 2017 2016 2015 2014 2011 2009 2008 2007 2006

All Journal Article Presentation Patent

[Journal Article] Interactions between Interstitial and Substitutional Elements of Solute Diatomic and Triatomic Clusters in <i>α</i>-Fe from First-principles Calculations2024
- Author(s)
  Uesugi Tokuteru、Ashino Shuji、Takigawa Yorinobu、Higashi Kenji
- Journal Title
  
  ISIJ International
  
  Volume: 64 Issue: 7 Pages: 1206-1217
- DOI
  10.2355/isijinternational.ISIJINT-2024-062
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2024-05-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K04422
[Journal Article] Overview and applications of machine learning to materials engineering (part 1)2023
- Author(s)
  Uesugi Tokuteru
- Journal Title
  
  Journal of Japan Institute of Light Metals
  
  Volume: 73 Issue: 3 Pages: 104-111
- DOI
  10.2464/jilm.73.104
- ISSN
  0451-5994, 1880-8018
- Year and Date
  2023-03-15
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K04422
[Journal Article] 機械学習技術の紹介とその鉄鋼業への応用事例2023
- Author(s)
  上杉徳照
- Journal Title
  
  山陽特殊製鋼技報
  
  Volume: 30 Pages: 3-20
- Open Access
- Data Source
  KAKENHI-PROJECT-23K04422
[Journal Article] Fractographic Classification by Transfer Learning Considering Material Types2023
- Author(s)
  UESUGI Tokuteru、KONDOU Mitsuaki、HAMADA Naoyuki、KITA Shunsuke、HIRATA Tomotake
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 72 Issue: 5 Pages: 376-383
- DOI
  10.2472/jsms.72.376
- ISSN
  0514-5163, 1880-7488
- Year and Date
  2023-05-15
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K04422
[Journal Article] Artificial neural network assisted by first-principles calculations for predicting transformation temperatures in shape memory alloys2019
- Author(s)
  D. Minami, T. Uesugi, Y. Takigawa, K. Higashi
- Journal Title
  
  International Journal of Modern Physics B
  
  Volume: 33 Issue: 08 Pages: 1950055-1950055
- DOI
  10.1142/s0217979219500553
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26220907, KAKENHI-PROJECT-18J15203
[Journal Article] チタンの計算材料科学2017
- Author(s)
  上杉徳照、佐原亮二
- Journal Title
  
  軽金属
  
  Volume: 67 Pages: 653-661
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26220907
[Journal Article] First-principles study of transformation strains and phase stabilities in α″ and β Ti-Nb-X alloys2017
- Author(s)
  Minami Daichi、Uesugi Tokuteru、Takigawa Yorinobu、Higashi Kenji
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 716 Pages: 37-45
- DOI
  10.1016/j.jallcom.2017.05.046
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26220907
[Journal Article] 低Agはんだ合金の流動応力へのAu添加と高温時効の影響2017
- Author(s)
  濱田真行、森雄基、上杉徳照、瀧川順庸、東健司
- Journal Title
  
  第23回エレクトロニクスにおけるマイクロ接合・実装技術シンポジウム論文集
  
  Volume: 23 Pages: 65-70
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K18226
[Journal Article] Effect of Alloying Element X on Transformation Strains and Phase Stabilities between α′′ and β Ti-Nb-X (X = Al, Sn, Zr, Ta) Ternary Alloys from First-Principles Calculations2016
- Author(s)
  D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 57 Issue: 3 Pages: 263-268
- DOI
  10.2320/matertrans.MB201509
- NAID
  130005127314
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26220907
[Journal Article] Effects of Solute Fe, Zn and Mg on Recrystallization in Aluminum2016
- Author(s)
  K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 57 Issue: 3 Pages: 329-334
- DOI
  10.2320/matertrans.MBW201515
- NAID
  130005127301
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K21294
[Journal Article] Effect of Solute Elements on Grain Refinement during Friction Stir Processing in High-Purity Aluminum2016
- Author(s)
  T. Uesugi, H. Iwami, Y. Takigawa and K. Higashi
- Journal Title
  
  Materials Science Forum
  
  Volume: 838-839 Pages: 116-121
- DOI
  10.4028/www.scientific.net/msf.838-839.116
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K21294
[Journal Article] Effects of transition metals on elastic moduli of binary β-Ti alloys from first-principles calculations2015
- Author(s)
  A. Koyano, T. Uesugi, Y. Takigawa and K. Higashi
- Journal Title
  
  Processing and Fabrication of Advanced Materials XXIV
  
  Volume: 1 Pages: 568-576
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26220907
[Journal Article] Design of high-strength aluminum alloys based on first-principles calculations of misfit strain and grain boundary cohesion2015
- Author(s)
  T. Uesugi and K. Higashi
- Journal Title
  
  Processing and Fabrication of Advanced Materials XXIV
  
  Volume: 1 Pages: 552-563
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K21294
[Journal Article] Effects of third elements on shape memory properties of Ti-Nb-X and Ti-Mo-X ternary alloys from first-principles calculations2015
- Author(s)
  D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
- Journal Title
  
  Processing and Fabrication of Advanced Materials XXIV
  
  Volume: 1 Pages: 577-581
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26220907
[Journal Article] Effect of Mg content on the minimum grain size of Al? Mg alloys obtained by friction stir processing.2011
- Author(s)
  森重大樹、平田智丈、上杉徳照、瀧川順庸、辻川正人、東健司
- Journal Title
  
  Scripta Materialia 64
  
  Pages: 355-358
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760502
[Journal Article] Effect of Mg content on the minimum grain size of Al-Mg alloys obtained by friction stir processing2011
- Author(s)
  森重大樹、平田智丈、上杉徳照、瀧川順庸、辻川正人、東健司
- Journal Title
  
  Scripta Materialia
  
  Volume: 64 Pages: 355-358
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760502
[Journal Article] 第一原理計算によるfcc金属の対応傾角粒界における粒界エネルギーと過剰体積の関係2008
- Author(s)
  上杉徳照, 東健司
- Journal Title
  
  計算工学講演会論文集 13
  
  Pages: 565-566
- NAID
  10024406197
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] First-principles Studies on Grain Boundary Energies of [110] Tilt Grain Boundaries in Aluminum2007
- Author(s)
  Y. Inoue, T. Uesugi, Y. Takigawa and K. Higashi
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 1837-1840
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] First-Principles Calculations of Grain Boundary γ-Surface for Various Grain Boundaries with Different Energies in Aluminum2007
- Author(s)
  T. Uesugi, Y. Inoue, Y. Takigawa, K. Higashi
- Journal Title
  
  Materials Science Forum
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] Atomistic Studies of Defbrmation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles2007
- Author(s)
  T. Uesugi, Y. Takigawa, and K. Higashi
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 977-980
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Process2007
- Author(s)
  S.Wakayama, Y.Kimono, Y.Takigawa, T.Uesugi, K.Higashi
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 1375-1348
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15074217
[Journal Article] Microstructure and Mechanical Properties in Friction Stir Processed Zr-AI-Ni-Cu Bulk Metallic Glass2007
- Author(s)
  J.Kobata, Y.Takigawa, S.W.Chung, H.Tsuda, T.Uesugi, H.Kimura, K.Higashi
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 1345-1348
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15074217
[Journal Article] First-principles Studies on Grain Boundary Energies of [110] Tilt Grain Boundaries in Aluminum2007
- Author(s)
  Y. Inoue, T. Uesugi, Y. Takigawa, K. Higashi
- Journal Title
  
  Materials Science Forum
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles2007
- Author(s)
  T. Uesugi, Y. Takigawa, K. Higashi
- Journal Title
  
  Materials Science Forum
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] First-Principles Calculations of Grain Boundary y-Surface for Vahous Grain Boundaries with Different Energies in Aluminum2007
- Author(s)
  T. Uesugi, Y. Inoue, Y. Takigawa and K. Higashi
- Journal Title
  
  Materials Science Forum 551-552
  
  Pages: 331-336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062007
[Journal Article] Deformation Mechanism of Nanocrystalline Al-Fe Alloys by Analysis from Ab-Initio Calculations2006
- Author(s)
  T.Uesugi, Y.Takigawa, K.Higashi
- Journal Title
  
  Mater.Sci.Forum 503-504
  
  Pages: 209-214
- Data Source
  KAKENHI-PROJECT-15074217
[Patent] 鉛フリーはんだ合金2016
- Inventor(s)
  濱田真行、東健司、瀧川順庸、上杉徳照、森雄基
- Industrial Property Rights Holder
  大阪府立産業技術総合研究所、大阪府立大学
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2016-116305
- Filing Date
  2016-06-10
- Data Source
  KAKENHI-PROJECT-15K18226
[Presentation] 機械学習で補正したVolume Size Factorの第一原理計算2024
- Author(s)
  上杉徳照, 松浦隼凪
- Organizer
  軽金属学会第146回春期大会
- Data Source
  KAKENHI-PROJECT-23K04422
[Presentation] 機械学習を用いた AZ31 マグネシウム合金の硬さに及ぼす集合組織による影響の評価2024
- Author(s)
  澤源士郎, 上杉徳照, 森重大樹, 田中努, 濱田真行, 平田智丈
- Organizer
  軽金属学会第146回春期大会
- Data Source
  KAKENHI-PROJECT-23K04422
[Presentation] 深層学習と金属種間の転移学習による破断面SEM画像の分類2023
- Author(s)
  上杉徳照, 濱田真行, 喜多俊輔, 平田智丈
- Organizer
  FIT2023第22回情報科学技術フォーラム
- Data Source
  KAKENHI-PROJECT-23K04422
[Presentation] 製造業へのAI適用2023
- Author(s)
  上杉徳照
- Organizer
  日本鋳造工学会関西支部令和５年度秋季講演大会
- Invited
- Data Source
  KAKENHI-PROJECT-23K04422
[Presentation] Machine learning and first-principles calculations for mechanism of nano clustering in Fe-X-N (X = Al, Ti, V and Cr) alloys2023
- Author(s)
  Tokuteru Uesugi
- Organizer
  The 3rd Materials Research Meeting (MRM 2023) The 24th IUMRS-International Conference in Asia (IUMRS-ICA 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K04422
[Presentation] 機械学習と第一原理計算によるBCC鉄におけるナノクラスタリングのメカニズム2023
- Author(s)
  上杉徳照
- Organizer
  日本金属学会第173回講演大会
- Data Source
  KAKENHI-PROJECT-23K04422
[Presentation] 第一原理計算によるAuCuAl合金のΣ3[110]粒界における粒界強化元素の探索2019
- Author(s)
  芦野秀治, 上杉徳照, 海瀨晃, 田原正樹, 細田秀樹, 瀧川順庸, 東健司
- Organizer
  第164回日本金属学会春期講演大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] AuCuAl合金のΣ3[110]粒界における溶質元素の粒界偏析と粒界強化の第一原理計算2019
- Author(s)
  芦野秀治, 上杉徳照, 海瀨晃, 田原正樹, 細田秀樹, 瀧川順庸, 東健司
- Organizer
  第166回超塑性研究会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算と機械学習に基づた形状記憶合金の変態温度2018
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第163回日本金属学会秋期講演大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算による Ti-Nb-Al形状記憶合金の合金設計2018
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるAuCuAl-X合金の粒界偏析2018
- Author(s)
  芦野秀治, 上杉徳照, 海瀨晃, 田原正樹, 細田秀樹, 瀧川順庸, 東健司
- Organizer
  第28回日本MRS年次大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Transmission electron microscope observation of slip deformation in single-crystalline Ti-27mol%Nb biomedical shape memory alloy2018
- Author(s)
  Ryotaro Hara, Nao Okano, Daichi Minami, Tokuteru Uesugi, Yorinobu Takizawa, Kenji Higashi, Masaki Tahara, Tomonari Inamura, Hideki Hosoda
- Organizer
  The 3rd International Symposium on Biomedical Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算と機械学習に基づいた形状記憶合金のマルテンサイト変態温度2018
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第28回日本MRS年次大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti-Nb-Al 三元系超弾性合金の設計と実験的検証2018
- Author(s)
  村田美美, 上田伊織, 田原正樹, 細田秀樹, 南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第163回日本金属学会秋期講演大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるTi-Nb-Al形状記憶合金の組成最適化2018
- Author(s)
  南大地, 上杉徳照 ,瀧川順庸, 東健司
- Organizer
  日本金属学会2018年春期講演大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] チタン合金の変態温度に及ぼす酸素の影響の第一原理計算2018
- Author(s)
  上杉徳照, 嶋本純, 南大地, 瀧川順庸, 東健司
- Organizer
  軽金属学会第135回秋期大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算による Ti-Cr-Al 形状記憶・超弾性合金の最適組成設計2018
- Author(s)
  佐藤領, 南大地, 上杉徳照, 岩崎真也, 田原正樹, 細田秀樹, 瀧川順庸, 東健司
- Organizer
  第163回日本金属学会秋期講演大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 新合金開発の効率化に貢献する第一原理計算2017
- Author(s)
  上杉徳照, 瀧川順庸, 東健司
- Organizer
  第８回生体医歯工学公開セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti合金の相安定性、弾性率、格子変形ひずみにおける合金元素の影響の第一原理計算2017
- Author(s)
  上杉徳照, 南大地, 瀧川順庸, 東健司
- Organizer
  日本金属学会チタン製造プロセスと材料機能研究会第3回講演会
- Place of Presentation
  関西大学, 大阪
- Year and Date
  2017-01-13
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti合金の相安定性に及ぼす酸素の影響の第一原理計算2017
- Author(s)
  上杉徳照, 嶋本純, 南大地, 瀧川順庸, 東健司
- Organizer
  日本鉄鋼協会シンポジウム「チタン合金の相変態研究の新たな展開Ⅱ」
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ab initio design for biomedical Ti-Nb based shape memory alloys2017
- Author(s)
  D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  The 18th International Conference of the Union of Materials Research Societies in Asia (IUMRS-ICA 2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算を用いた生体用Ti-Nb基形状記憶合金の予測2017
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第８回生体医歯工学公開セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti-Nb合金のα，α''，β，ω相の形成熱に及ぼす酸素の影響の第一原理計算2017
- Author(s)
  上杉徳照, 嶋本純, 南大地, 瀧川順庸, 東健司
- Organizer
  日本金属学会2017年度春期講演大会
- Place of Presentation
  首都大学東京南大沢キャンパス, 東京
- Year and Date
  2017-03-15
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 高純度Al-Cu-Mg合金のZr添加と時効条件の最適化による粒界破壊の抑制2017
- Author(s)
  大手里奈, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本金属学会2017年秋期講演大会
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] 高純度Al-Fe合金における固溶Fe原子の粒界偏析2017
- Author(s)
  大手里奈, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本材料学会若手学生研究発表会
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] Effect of Alloying Element on Beta Phase Stability in Ti-X Alloys from First-Principles Calculations2017
- Author(s)
  T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  The 18th International Conference of the Union of Materials Research Societies in Asia (IUMRS-ICA 2017)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 低Agはんだ合金の流動応力へのAu添加と高温時効の影響2017
- Author(s)
  濱田真行、森雄基、上杉徳照、瀧川順庸、東健司
- Organizer
  第23回エレクトロニクスにおけるマイクロ接合・実装技術シンポジウム
- Place of Presentation
  パシフィコ横浜（神奈川県横浜市）
- Year and Date
  2017-02-01
- Data Source
  KAKENHI-PROJECT-15K18226
[Presentation] 第一原理計算によるTi-Nb-(Al, Hf, Zr)形状記憶合金組成の最適化2017
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本金属学会2017年秋期講演大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Sn-Auはんだ合金の高温変形における構成方程式の構築2017
- Author(s)
  森雄基、上杉徳照、濱田真行、瀧川順庸、東健司
- Organizer
  公益社団法人日本金属学会　2017年秋期講演大会
- Data Source
  KAKENHI-PROJECT-15K18226
[Presentation] ナノインデンテーション法によるTi-Cu基金属ガラス薄膜の高温硬さの評価2017
- Author(s)
  小畠淳平, 瀧川順庸, 三浦健一, 網谷健児, 上杉徳照, 東健司
- Organizer
  日本金属学会2017年度春期講演大会
- Place of Presentation
  首都大学東京南大沢キャンパス, 東京
- Year and Date
  2017-03-15
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるTi-Nb-X形状記憶合金の変態ひずみ量の予測2017
- Author(s)
  南大地, 嶋本純, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会第132回春期大会
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 電解析出法による強度・延性バランスに優れたアルミニウム合金の創製2017
- Author(s)
  瀧川順庸, 久間千早希, 上杉徳照, 東健司
- Organizer
  日本金属学会2017年度春期講演大会
- Place of Presentation
  首都大学東京南大沢キャンパス, 東京
- Year and Date
  2017-03-15
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Au添加によるSn基はんだ合金の高強度化について2017
- Author(s)
  濱田真行、森雄基、上杉徳照、瀧川順庸、東健司
- Organizer
  一般社団法人スマートプロセス学会　第17回電子デバイス実装研究委員会
- Data Source
  KAKENHI-PROJECT-15K18226
[Presentation] β型Ti-X合金のヤング率とβ相安定性における合金元素の影響の第一原理計算2016
- Author(s)
  小谷野淳史, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会第130回春期大会
- Place of Presentation
  大阪大学, 大阪
- Year and Date
  2016-05-29
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 高純度アルミニウム地金を用いた時効硬化型Al-Cu-Mg合金の引張特性2016
- Author(s)
  大手里奈, 吉岡浩司, 青木良晃, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会関西支部若手研究者・院生による研究発表会
- Place of Presentation
  大阪府立大学(大阪)
- Year and Date
  2016-12-21
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] 第一原理計算によるTi-Nb基合金のα"-β相間の格子変形ひずみとω相安定性に及ぼす第三元素の影響2016
- Author(s)
  南大地, 嶋本純, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本金属学会2016年度秋期講演大会
- Place of Presentation
  大阪大学豊中キャンパス, 大阪
- Year and Date
  2016-09-23
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 種々の熱処理を施したTi-Cr-Sn形状記憶合金の冷間加工性と組織2016
- Author(s)
  上杉広大, 篠原百合, 田原正樹, 細田秀樹, 稲邑朋也
- Organizer
  日本金属学会2016年度秋期講演大会
- Place of Presentation
  大阪大学豊中キャンパス, 大阪
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Snの流動応力へのAuの微量添加と高温時効の影響2016
- Author(s)
  濱田真行、森雄基、上杉徳照、瀧川順庸、東健司
- Organizer
  日本金属学会2016年秋期（159回）講演大会
- Place of Presentation
  大阪大学（大阪府豊中市）
- Year and Date
  2016-09-22
- Data Source
  KAKENHI-PROJECT-15K18226
[Presentation] Prediction of Beta Phase Stability of Ti Alloys from First-Principles Calculations2016
- Author(s)
  T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  The 4th TKU-OPU International Symposium on Frontier Chemistry and Materials for the 21st Century
- Place of Presentation
  Langyang, Taiwan
- Year and Date
  2016-11-21
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Al-Cu-Mg合金の再結晶粒径と時効硬化に及ぼすZr添加の影響2016
- Author(s)
  大手里奈，青木良晃，上杉徳照，瀧川順庸，東健司
- Organizer
  日本材料学会　若手学生研究発表会
- Place of Presentation
  京都テルサ(京都)
- Year and Date
  2016-10-12
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] 第一原理計算を用いた Ti-Nb基形状記憶合金の変態ひずみ向上に有効な元素とその組成の予測2016
- Author(s)
  南大地, 嶋本純, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第4回グリーンエネルギー材料のマルチスケール創製研究会
- Place of Presentation
  南三陸　ホテル観洋, 宮城
- Year and Date
  2016-11-20
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti-Nb、Ti-Mo基形状記憶合金の格子変形ひずみに及ぼす第三元素の影響の第一原理計算2016
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会第130回春期大会
- Place of Presentation
  大阪大学, 大阪
- Year and Date
  2016-05-29
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] β型Ti-X合金の弾性率、β相安定性、電子状態密度の第一原理計算2016
- Author(s)
  小谷野淳史, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本金属学会2016年度秋期講演大会
- Place of Presentation
  大阪大学豊中キャンパス, 大阪
- Year and Date
  2016-09-22
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Sn基鉛フリーはんだ合金の流動応力に及ぼすAuの影響2016
- Author(s)
  森雄基、上杉徳照、濱田真行、瀧川順庸、東健司
- Organizer
  第2回日本材料学会材料WEEK若手学生研究発表会
- Place of Presentation
  京都テルサ（京都府京都市）
- Year and Date
  2016-10-11
- Data Source
  KAKENHI-PROJECT-15K18226
[Presentation] アルミニウム合金の高純度化による延性の向上2016
- Author(s)
  吉岡浩司, 大手里奈, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会関西支部若手研究者・院生による研究発表会
- Place of Presentation
  大阪府立大学(大阪)
- Year and Date
  2016-12-21
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] Ti-Nb-X形状記憶合金の格子変形ひずみとα'、β、ω相の安定性の第一原理計算2016
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第26回日本MRS年次大会
- Place of Presentation
  横浜市開港記念会館, 横浜
- Year and Date
  2016-12-19
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 高強度Al-Zn-Mg-Cu合金の延性に及ぼすZrの影響2016
- Author(s)
  吉岡浩司，上杉徳照，瀧川順庸，東健司
- Organizer
  日本材料学会　若手学生研究発表会
- Place of Presentation
  京都テルサ(京都)
- Year and Date
  2016-10-12
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] 第一原理計算によるTi-Nb-X形状記憶合金の合金成分設計2016
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  軽金属学会関西支部平成28年度若手研究者・院生による研究発表会
- Place of Presentation
  大阪府立大学, 大阪
- Year and Date
  2016-12-21
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Design of Ni-free Ti-based superelastic alloys for biomedical applications from first-principles calculations2016
- Author(s)
  D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  International Symposium on Biomedical Engineering
- Place of Presentation
  Tokyo Medical and Dental Univ., Tokyo
- Year and Date
  2016-11-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti-Nb-X合金におけるα''-β相間の変態ひずみと相安定性に及ぼす合金元素Xの影響の第一原理計算2015
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本機械学会第28回計算力学講演会
- Place of Presentation
  横浜国立大学（横浜）
- Year and Date
  2015-10-11
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 高純度アルミニウム合金の再結晶温度へ及ぼす溶質原子，析出物の影響2015
- Author(s)
  和田光司, 武島健太, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本金属学会2015年秋期講演大会
- Place of Presentation
  九州大学伊都キャンパス(福岡)
- Year and Date
  2015-09-17
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] Design of high-strength aluminum alloys based on first-principles calculations of misfit strain and grain boundary cohesion2015
- Author(s)
  T. Uesugi and K. Higashi
- Organizer
  Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV)
- Place of Presentation
  Kansai University, Osaka, Japan
- Year and Date
  2015-12-18
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] Study of solute atoms and precipitates affecting recrystallization temperature in high purity Al-Fe alloy2015
- Author(s)
  K. Wada, K. Takeshima, T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV)
- Place of Presentation
  Kansai University, Osaka, Japan
- Year and Date
  2015-12-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] 第一原理計算によるTi-X合金の溶解熱とエンタルピー曲線2015
- Author(s)
  上杉徳照, 宮前将, 瀧川順庸, 東健司
- Organizer
  日本機械学会第28回計算力学講演会
- Place of Presentation
  横浜国立大学（横浜）
- Year and Date
  2015-10-11
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるα-Ti合金の固溶強化に及ぼすミスフィットひずみの影響2015
- Author(s)
  上杉徳照, 田中謙, 瀧川順庸, 東健司
- Organizer
  軽金属学会第128回春期大会
- Place of Presentation
  東北大学青葉山キャンパス（仙台）
- Year and Date
  2015-05-17
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] First-Principles Computational Materials Design of Aluminum Alloys as Structural Materials2015
- Author(s)
  T. Uesugi
- Organizer
  The 2nd FZU-OPU Joint International Symposium
- Place of Presentation
  Fuzhou University, Fuzhou, China
- Year and Date
  2015-11-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] Ti-Nb-X合金における変態ひずみと相安定性の第一原理計算2015
- Author(s)
  南大地, 瀧川順庸, 上杉徳照, 東健司
- Organizer
  第157回日本金属学会秋期大会
- Place of Presentation
  九州大学伊都キャンパス（福岡）
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Effects of third elements on shape memory properties of Ti-Nb-X and Ti-Mo-X ternary alloys from first-principles calculations2015
- Author(s)
  D. Minami, T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials-XXIV
- Place of Presentation
  関西大学千里山キャンパス（大阪）
- Year and Date
  2015-12-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti-Nb基合金の形状記憶特性に及ぼす第三元素の影響の第一原理計算2015
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  形状記憶合金協会SMAシンポジウム2015
- Place of Presentation
  金沢歌舞伎座（金沢）
- Year and Date
  2015-11-12
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Effects of transition metals on elastic moduli of binary β-Ti alloys from first-principles calculations.2015
- Author(s)
  A. Koyano, T. Uesugi, Y. Takigawa and K. Higashi
- Organizer
  Twenty-Fourth International Symposium on Processing and Fabrication of Advanced Materials-XXIV
- Place of Presentation
  関西大学千里山キャンパス（大阪）
- Year and Date
  2015-12-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるβ型Ti-X合金の相安定性と弾性特性における合金遷移元素の影響2015
- Author(s)
  小谷野淳史, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第25回日本MRS年次大会
- Place of Presentation
  横浜市開港記念会館(横浜)
- Year and Date
  2015-12-08
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Ti-Nb-X、Ti-Mo-X合金における変態ひずみと相安定性の第一原理計算2015
- Author(s)
  南大地, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  第25回日本MRS年次大会
- Place of Presentation
  横浜市開港記念会館(横浜)
- Year and Date
  2015-12-08
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Alloying Effects of Transition Metals on Beta Phase Stability of Ti Alloys from First-Principles Calculations2015
- Author(s)
  T.Uesugi, S.Miyamae, Y.Takigawa and K.Higashi
- Organizer
  Ti-2015: The 13th World Conference on Titanium
- Place of Presentation
  Manchester Grand Hyatt, San Diego, U.S.A.
- Year and Date
  2015-08-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Effect of solute elements on grain refinement during　friction stir processing in high-purity aluminum2015
- Author(s)
  T. Uesugi, H. Iwami, Y. Takigawa and K. Higashi
- Organizer
  12th International Conference on Superplasticity in Advanced Materials (ICSAM)
- Place of Presentation
  University of Tokyo, Tokyo, Japan
- Year and Date
  2015-09-07
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K21294
[Presentation] TiおよびTi-Mo合金の相安定性に及ぼす侵入型元素の影響の第一原理計算2015
- Author(s)
  上杉徳照, 田中謙, 瀧川順庸, 東健司
- Organizer
  第157回日本金属学会秋期大会
- Place of Presentation
  九州大学伊都キャンパス（福岡）
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるTi-Nb-X (X=Hf、Ta、V、Zr)合金のβ相とα"相の格子定数.2014
- Author(s)
  南大地, 田中謙, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本鉄鋼協会・日本金属学会関西支部　平成２６年度関西支部鉄鋼プロセス研究会・材料化学研究会　第３回合同研究会
- Place of Presentation
  京都大学吉田キャンパス, 京都
- Year and Date
  2014-12-25
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] Phase stability of beta phase in Ti-X (X = Mo, Nb, V and W) alloys from first-principles calculations.2014
- Author(s)
  T. Uesugi, S. Miyamae and K. Higashi
- Organizer
  International Union of Materials Research Societies International Conference in Asia 2014 (IUMRS-ICA 2014)
- Place of Presentation
  Fukuoka University, Fukuoka, Japan
- Year and Date
  2014-08-27
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 第一原理計算によるβ型Ti-X合金におけるサイズファクターの溶質濃度依存性.2014
- Author(s)
  田中謙, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本鉄鋼協会・日本金属学会関西支部　平成２６年度関西支部鉄鋼プロセス研究会・材料化学研究会　第３回合同研究会
- Place of Presentation
  京都大学吉田キャンパス, 京都
- Year and Date
  2014-12-25
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] β型Ti-X（X=Mo、Nb、V、Ta）合金の弾性率と電子状態密度の第一原理計算.2014
- Author(s)
  小谷野淳史, 上杉徳照, 瀧川順庸, 東健司
- Organizer
  日本鉄鋼協会・日本金属学会関西支部　平成２６年度関西支部鉄鋼プロセス研究会・材料化学研究会　第３回合同研究会
- Place of Presentation
  京都大学吉田キャンパス, 京都
- Year and Date
  2014-12-25
- Data Source
  KAKENHI-PROJECT-26220907
[Presentation] 強ひずみ加工を施した純アルミニウムの結晶粒径に及ぼす純度の影響2011
- Author(s)
  平田智丈、森重大樹、上杉徳照、瀧川順庸、辻川正人、東健司
- Organizer
  軽金属学会春期大会
- Place of Presentation
  名古屋大学
- Year and Date
  2011-05-22
- Data Source
  KAKENHI-PROJECT-20760502
[Presentation] アルミニウム中のMg原子の粒界偏析に及ぼす粒界構造の影響の第一原理計算2009
- Author(s)
  上杉徳照, 東健司
- Organizer
  日本金属学会2009年春期大会
- Place of Presentation
  東京工業大学
- Year and Date
  2009-03-30
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] アルミニウム中のMg 原子の粒界偏析に及ぼす粒界構造の影響の第一原理計算2009
- Author(s)
  上杉徳照
- Organizer
  日本金属学会2009年春期大会
- Place of Presentation
  東京工業大学
- Year and Date
  2009-03-30
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] Solid Solution Strengthening using the First-principles Results of Misfit Strain in Al-based Alloys2008
- Author(s)
  T. Uesugi, K. Higashi
- Organizer
  Materials Eesearch Society 2008 Fall Meeting
- Place of Presentation
  Boston, USA
- Year and Date
  2008-12-03
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] 第一原理計算より算出したミスフィットひずみを用いたアルミニウム合金の固溶強化の評価2008
- Author(s)
  上杉徳照
- Organizer
  軽金属学会第114回春期大会
- Place of Presentation
  愛媛大学
- Year and Date
  2008-05-11
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] 第一原理計算より算出したミスフィットひずみを用いたアルミニウム合金の固溶強化の評価゛ヽ2008
- Author(s)
  上杉徳照, 東健司
- Organizer
  軽金属学会第114回春期大会
- Place of Presentation
  愛媛大学
- Year and Date
  2008-05-11
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] Solid Solution Strengthening using the First-principles Results of Misfit Strain in Al-based Alloys2008
- Author(s)
  T. Uesugi
- Organizer
  Materials Research Society 2008 Fall Meeting
- Place of Presentation
  Boston, USA
- Year and Date
  2008-12-03
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] 第一原理計算によるfcc金属の対応傾角粒界における粒界エネルギーと過剰体積の関係2008
- Author(s)
  上杉徳照
- Organizer
  第13回計算工学講演会
- Place of Presentation
  仙台市民会館
- Year and Date
  2008-05-21
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] 第一原理計算結果を用いたAl-Fe合金の固溶強化機構の解明2008
- Author(s)
  上杉徳照
- Organizer
  軽金属学会関西支部主催若手研究者・院生による研究発表会
- Place of Presentation
  姫路市
- Year and Date
  2008-01-10
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] First-Principles Calculations of the Excess Free Volume in Aluminum2008
- Author(s)
  T. Uesugi
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM2008)
- Place of Presentation
  九州大学
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] 第一原理計算結果を用いたA-Fe合金の固溶強化機構の解明2008
- Author(s)
  上杉徳照、瀧川順庸、東健司
- Organizer
  軽金属学会関西支部主催若手研究者・院生による研究発表会
- Place of Presentation
  姫路市
- Year and Date
  2008-01-10
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] アルミニウム対応傾角粒界における粒界エネルギーと過剰体積の関係2008
- Author(s)
  上杉徳恩, 東健司
- Organizer
  日本金属学会2008年春期大会
- Place of Presentation
  武蔵工業大学(東京)
- Year and Date
  2008-03-27
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] アルミニウム対応傾角粒界における粒界エネルギーと過剰体積の関係2008
- Author(s)
  上杉徳照
- Organizer
  日本金属学会2008年春期大会
- Place of Presentation
  武蔵野工業大学
- Year and Date
  2008-03-27
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] fcc金属の対応傾角粒界における粒界エネルギーと過剰体積の関係2008
- Author(s)
  上杉徳照
- Organizer
  日本材料学会第13回分子動力学シンポジウム
- Place of Presentation
  鹿児島大学
- Year and Date
  2008-05-23
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] FirstPrinciples Studies on Grain Boundary Energy of [110]Tilt Grain Boundahes in Aluminum2007
- Author(s)
  Y. Inoue, T, Uesugi, Y. Tskigawa and K. Higashi
- Organizer
  The Stxth Pacific Rim Intematiollal Conference on Advanced Materials and Processing
- Place of Presentation
  韓国、済州島
- Year and Date
  2007-11-06
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] 第一原理計算によるアルミニウム[110]傾角粒界の粒界エネルギーと粒界すべりの関係2007
- Author(s)
  井上泰彦、上杉徳照、東健司
- Organizer
  日本機械学会第20回計算力学講演会
- Place of Presentation
  同志社大学(京都府)
- Year and Date
  2007-11-26
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] Microstructure and Mechanical Properties in Friction Stir Processed Zr-AL-Ni-Cu Bulk Metallic Glass2007
- Author(s)
  J.Kobata, Y.Takigawa, S.W.Chung, H.Tsuda, T.Uesugi, H. Kimura, K. Higashi
- Organizer
  The Sixth Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  済州(韓国)
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-15074217
[Presentation] Atomistic Studies of Deformation Mechanisln of Nanocrystalline Al Ti and Al-Fe Alloys from First-Principles2007
- Author(s)
  T, Uesugi, Y. Takigawa and K. Higashi
- Organizer
  The Sixth Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  韓国、済州島
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles2007
- Author(s)
  T. Uesugi
- Organizer
  The Sixth Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  Jeju, Republic of Korea
- Year and Date
  2007-11-06
- Data Source
  KAKENHI-PROJECT-18062007
[Presentation] Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Pocess2007
- Author(s)
  S.Wakayama, Y.Kimono, Y.Takigawa, T.Uesugi, K.Higashi
- Organizer
  The Sixth Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  済州(韓国)
- Year and Date
  2007-11-07
- Data Source
  KAKENHI-PROJECT-15074217
[Presentation] パラジウム基固溶体における溶解熱の第一原理計算2007
- Author(s)
  上杉徳照, 東健司
- Organizer
  第51回日本学術会議材料工学連合講演会
- Place of Presentation
  京大会館(京都)
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-15074217

1. HIGASHI Kenji (50173133)

# of Collaborated Projects: 5 results

# of Collaborated Products: 27 results
2. TAKIGAWA Yorinobu (70382231)

# of Collaborated Projects: 4 results

# of Collaborated Products: 24 results
3. KOHYAMA Masanori (60344157)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. TANAKA Shingo (50357448)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. YOSHIYA Masato (00399601)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. HIRATA Tomotake (20359433)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
7. TANAKA Tsutomu (90416248)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. MORISHIGE Taiki (30530076)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
9. TSUJIKAWA Masato (90172006)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
10. HOSODA Hideki (10251620)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
11. NIINOMI MITSUO (50126942)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. ISHIMOTO Takuya (50508835)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. KONNO Toyohiko (90260447)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. SATO Kazuhisa (70314424)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. AKAHORI Toshjkazu (00324492)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. Hamada Naoyuki (90736282)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
17. 津田大 (80217322)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
18. 那須稔雄 (00083436)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. 東田賢二 (70156561)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. 三村耕司 (70181972)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. 高津正秀 (80145812)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. ペッツォッティジュセッペ (70262962)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. 曽根正人 (30323752)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. 稲邑朋也 (60361771)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
25. 田原正樹 (80610146)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
26. 舟窪浩 (90219080)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. 仲井正昭 (20431603)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. 劉恢弘 (40748943)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 稗田純子 (40566717)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 趙研 (00633661)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. WANG Ruzhi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. SAITOU Shigeki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. KANETAKA hiroyasu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. CHANG tsu-fu mark

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. SHINOHARA yuri

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
36. CHERNEMKO volodymyr

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. MORI Yuuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
38. 中山孝文

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Uesugi Tokuteru 上杉 徳照

上杉 徳照 ウエスギ トクテル

UESUGI Tokuteru 上杉 徳照

上杉 トクテル ウエスギ トクテル

Research Projects

Research Products

Co-Researchers

Uncovering the origin and theoretical design of shape memory alloys by machine learning and first-principles calculationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of aluminum alloys excellent in strength and ductility based on first-principles calculationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of low-Ag solder alloy with excellent creep resistance utilizing constitutive equation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Quest for fundamental dynamics of domain homo interface in shape change materials and principles for high performance materials

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Analysis of mechanism of peculiar high strength and ductility of metastable beta-type titanium alloy with high oxygen content for structural biomaterials

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Analysis of effects of fine nanoparticles and grain boundary character distribution on abnormal grain growth in friction stir welded material

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Understanding and designing of high-density lattice defect (HDLD) materials using electronic theory of solids

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

金属ガラスの変形・破壊のその場観察と原子レベルでのメカニクス解明

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Journal Article] Interactions between Interstitial and Substitutional Elements of Solute Diatomic and Triatomic Clusters in <i>α</i>-Fe from First-principles Calculations2024

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Overview and applications of machine learning to materials engineering (part 1)2023

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] 機械学習技術の紹介とその鉄鋼業への応用事例2023

Author(s)

Journal Title

Data Source

[Journal Article] Fractographic Classification by Transfer Learning Considering Material Types2023

Author(s)

Journal Title

DOI

ISSN

Uesugi Tokuteru 上杉徳照

上杉徳照ウエスギトクテル

UESUGI Tokuteru 上杉徳照

上杉トクテルウエスギトクテル

[Journal Article] Effect of Alloying Element X on Transformation Strains and Phase Stabilities between α′′ and β Ti-Nb-X (X = Al, Sn, Zr, Ta) Ternary Alloys from First-Principles Calculations2016