KANSHA Yasuki 甘蔗寂樹

… Alternative Names

KANSHA YASUKI 甘蔗寂樹

Less

Researcher Number	10544083
Other IDs	https://orcid.org/0000-0002-1136-5000
Affiliation (Current)	2024: 東京大学, 大学院総合文化研究科, 教授
Affiliation (based on the past Project Information) *help	2021 – 2023: 東京大学, 大学院総合文化研究科, 准教授 2015 – 2017: 東京大学, 生産技術研究所, 特任准教授 2014 – 2015: 東京大学, 生産技術研究所, 准教授 2012 – 2013: 東京大学, 生産技術研究所, 特任准教授
Review Section/Research Field	Principal Investigator Energy engineering / Basic Section 31020:Earth resource engineering, Energy sciences-related / Reaction engineering/Process system Except Principal Investigator Properties in chemical engineering process/Transfer operation/Unit operation
Keywords	Principal Investigator 環境発電 / 省エネルギー / 磁気モーメント / センサ / エネルギーハーベスティング / エネルギー全般 / 環境技術 / 廃熱利用 / エネルギー効率化 / エネルギー変換 … More / エネルギーの高効率化 / ガス分離 / 流動層 / プロセス設計 / エネルギー節約・効率利用 / エクセルギー / エネルギー効率利用 … More Except Principal Investigator 等価回路 / 流動特性 / 等価回路モデル / モデル化 / 流動層 Less

Development of energy harvesting sensors using magnetic moment changePrincipal Investigator
- Principal Investigator
  
  甘蔗寂樹
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 31020:Earth resource engineering, Energy sciences-related
- Research Institution
  The University of Tokyo
Power generation from low temperature waste heat using magnetic phase transitionPrincipal Investigator
- Principal Investigator
  
  KANSHA YASUKI
- Project Period (FY)
  2016 – 2017
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Energy engineering
- Research Institution
  The University of Tokyo
Design of energy-saving gas separation process using circulating fluidized bedPrincipal Investigator
- Principal Investigator
  
  KANSHA YASUKI
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Young Scientists (A)
- Research Field
  
  Reaction engineering/Process system
- Research Institution
  The University of Tokyo
Modeling of Fluidized Bed Flow Behavior
- Principal Investigator
  
  Ishizuka Masanori
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Properties in chemical engineering process/Transfer operation/Unit operation
- Research Institution
  The University of Tokyo
Fundamental research on an exergy recuperation device using magnetocaloric effectPrincipal Investigator
- Principal Investigator
  
  KANSHA YASUKI
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Energy engineering
- Research Institution
  The University of Tokyo

All 2023 2022 2021 2018 2017 2016 2015 2014 2013 2012 Other

All Journal Article Presentation

[Journal Article] Energy Harvesting Wireless Sensors Using Magnetic Phase Transition2022
- Author(s)
  Yasuki Kansha, Masanori Ishizuka
- Journal Title
  
  Computer Aided Chemical Engineering
  
  Volume: 49 Pages: 2059-2064
- DOI
  10.1016/b978-0-323-85159-6.50343-2
- ISBN
  9780323851596
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21H01868
[Journal Article] Efficient Power Generation from Low Temperature Heat Source2017
- Author(s)
  Yasuki Kansha, Masanori Ishizuka
- Journal Title
  
  CHEMICAL ENGINEERING TRANSACTIONS
  
  Volume: 56 Pages: 1519-1524
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-16K14544
[Journal Article] Design of Energy-Saving Carbon Dioxide Separation Process Using Fluidized Bed2017
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Hiroyuki Mizuno, Atsushi Tsutsumi
- Journal Title
  
  Applied Thermal Engineering
  
  Volume: 126 Pages: 134-138
- DOI
  10.1016/j.applthermaleng.2017.07.156
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05554
[Journal Article] CO2 Separation Process Using Circulating Fluidized Bed Based on Exergy Recuperation2016
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Hiroyuki Mizuno, Atsushi Tsutsumi
- Journal Title
  
  CHEMICAL ENGINEERING TRANSACTIONS
  
  Volume: 52 Pages: 109-114
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15H05554
[Journal Article] Control of Solid Mass Flow Rate in Circulating Fluidized Bed by a Pulsed Gas Flow2016
- Author(s)
  Masanori Ishizuka, Hiroyuki Mizuno, Yasuki Kansha, Atsushi Tsutsumi
- Journal Title
  
  CHEMICAL ENGINEERING TRANSACTIONS
  
  Volume: 52 Pages: 127-132
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05554
[Journal Article] Numerical Investigation of Energy Saving Potential for Self-Heat Recuperation2015
- Author(s)
  Yasuki Kansha, Hiroyuki Mizuno, Yui Kotani, Masanori Ishizuka, Chunfeng Song, Qian Fu, Atsushi Tsutsumi
- Journal Title
  
  CHEMICAL ENGINEERING TRANSACTIONS
  
  Volume: 45 Pages: 187-192
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Journal Article] Modelling of Flow Behaviour at Downer and Riser in Triple Bed Circulating Fluidized Bed Using Equivalent Circuit2015
- Author(s)
  Masanori Ishizuka, Hiroyuki Mizuno, Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi*
- Journal Title
  
  CHEMICAL ENGINEERING TRANSACTIONS
  
  Volume: ４５ Pages: 889-894
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25420798
[Journal Article] Experimental investigation of an active magnetic regenerative heat circulator applied to self-heat recuperation technology2014
- Author(s)
  Yui Kotani, Yasuki Kansha, Ishizuka Masanori, Atsushi Tsutsumi
- Journal Title
  
  Applied Thermal Engineering
  
  Volume: 70 Issue: 2 Pages: 1202-1207
- DOI
  10.1016/j.applthermaleng.2014.04.015
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-14J08305, KAKENHI-PROJECT-24760727
[Journal Article] Experimental Investigation of an Active Magnetic Regenerative Heat Circulator Applied to Self-Heat Recuperation Technology2014
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Journal Title
  
  Applied Thermal Engineering
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760727
[Journal Article] Active Magnetic Regenerative Heat Circulator for Energy Saving in Thermal Process2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Journal Title
  
  Chemical Engineering Transactions
  
  Volume: 35 Pages: 229-234
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760727
[Journal Article] Active magnetic regenerative heat circulator for energy saving in thermal process2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Journal Title
  
  Chemical Engineering Transactions
  
  Volume: Vol. 35 Pages: 229-234
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760727
[Journal Article] Conceptual Design of an Active Magnetic Regenerative Heat Circulator Based on Self-Heat Recuperation Technology2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Journal Title
  
  Energy
  
  Volume: 55 Pages: 127-133
- DOI
  10.1016/j.energy.2013.03.014
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760727
[Journal Article] Self-heat recuperation using magnetocaloric effect2012
- Author(s)
  Yui Kotani、Yasuki Kansha、Atsushi Tsutsumi
- Journal Title
  
  Chemical Engineering Transactions
  
  Volume: Vol. 29 Pages: 373-378
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Chemical and Environmental Engineering Endeavor towards Green Transformations2023
- Author(s)
  Yasuki Kansha
- Organizer
  1st International Conference on Sustainable Chemical, Energy and Environmental Engineering (SCE3)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Design of New Energy Harvesting Technologies for Cyber-Physical Systems2023
- Author(s)
  Yasuki Kansha, Hikaru Kiyotomo, Yuka Sakai
- Organizer
  International Chemical Engineering Symposia 2023, 化学工学会第88年会併設
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Possibility of Energy Harvesting Wireless Sensors Using Magnetic Phase Transition2022
- Author(s)
  Yasuki Kansha, Hikaru Kiyomoto, Yuka Sakai, Yuki Sato
- Organizer
  2022 AIChE Annual Meeting
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Possible Application of Magnetic Phase Transition in Energy Harvesting Wireless Sensors for Body Temperature2022
- Author(s)
  Hikaru Kiyomoto, Yuka Sakai, Yuki Sato, Yasuki Kansha
- Organizer
  The Sixth International Symposium on Innovative Materials and Processes in Energy Systems (IMPRES 2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Design of New Energy Harvesting Technologies for Cyber Physical Systems2022
- Author(s)
  Yasuki Kansha, Hikaru Kiyotomo, Yuki Sato, Yuka Sakai
- Organizer
  The Sixth International Symposium on Innovative Materials and Processes in Energy Systems (IMPRES 2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Energy Harvesting Wireless Sensors Using Magnetic Phase Transition2022
- Author(s)
  Yasuki Kansha, Masanori Ishizuka
- Organizer
  The 14th International Symposium on Process Systems Engineering (PSE2021+)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Design of innovative energy harvesting wireless sensors based on magnetic phase transition2022
- Author(s)
  Yasuki Kansha, Hikaru Kiyotomo, Yuka Sakai
- Organizer
  26th International Congress on Chemical and Process Engineering (CHISA2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Energy harvesting form sub-ambient temperature exhausted heat using magnetic phase transition2021
- Author(s)
  甘蔗寂樹
- Organizer
  The 10th China-Japan Symposium on Chemical Engineering “Low-carbon chemical engineering: sciences and technologies”
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01868
[Presentation] Design of Energy-saving CO2 Capture Process Using Circulating Fluidized Bed for Power Generation2018
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  Process Systems Engineering 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Power generation from low temperature waste heat using magnetic phase transition2018
- Author(s)
  Yasuki Kansha, Masanori Ishizuka
- Organizer
  21st Conference Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction (PRES2018)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K14544
[Presentation] Energy-Saving CO2 Capture Process Using Fluidized Bed2018
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  化学工学会第83年会
- Invited
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] 流動層を用いた省エネルギーな二酸化炭素分離プロセスの設計2017
- Author(s)
  甘蔗寂樹, 石束真典, 水野寛之, 堤敦司
- Organizer
  第26回日本エネルギー学会大会
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] An Energy-Saving Carbon Dioxide Capture Using 　a Circulating Fluidized Bed2017
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Hiroyuki Mizuno, Atsushi Tsutsumi
- Organizer
  16th International Conference on Sustainable Energy Technologies (SET2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Development of an Energy-saving Carbon Dioxide Capture Process Using Circulating Fluidized Bed2017
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  10th World Congress of Chemical Engineering (WCCE10)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Energy-Saving Carbon Dioxide Separation Process Using Circulating Fluidized Bed2017
- Author(s)
  Yasuki Kansha
- Organizer
  The 8th China-Japan Symposium on Chemical Engineering
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Control of solid mass flow rate in circulating fluidized bed by a pulsed gas flow2016
- Author(s)
  Masanori Ishizuka, Hiroyuki Mizuno, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  19th Conference Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction
- Place of Presentation
  Prague, Czech
- Year and Date
  2016-08-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Design of energy saving CO2 separation process using circulating fluidized bed2016
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Hiroyuki Mizuno, Atsushi Tsutsumi
- Organizer
  2016 AIChE Annual Meeting
- Place of Presentation
  San Francisco, USA
- Year and Date
  2016-11-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Energy saving CO2 separation process Using fluidized bed2016
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Hiroyuki Mizuno, Atsushi Tsutsumi
- Organizer
  The 5th Asian Conference on Innovative Energy and Environmental Chemical Engineering
- Place of Presentation
  Yokohama, Japan
- Year and Date
  2016-11-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Control of particle circulation rate in circulating fluidized bed by a pulsed gas flow2016
- Author(s)
  Atsushi Tsutsumi,Yasuki Kansha, Hiroyuki Mizuno, Masanori Ishizuka
- Organizer
  Fluidization XV
- Place of Presentation
  Fairmont Le Chateau Montebello, Quebec, Canada
- Year and Date
  2016-05-22
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] CO2 separation process using circulating fluidized bed based on exergy recuperation2016
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Hiroyuki Mizuno, Atsushi Tsutsumi
- Organizer
  19th Conference Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction
- Place of Presentation
  Prague, Czech
- Year and Date
  2016-08-27
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Efficient power generation from low temperature heat source2016
- Author(s)
  Yasuki Kansha, Masanori Ishizuka
- Organizer
  The 9th Regional Conference on Chemical Engineering 2016
- Place of Presentation
  Kuala Lumpur, Malaysia
- Year and Date
  2016-11-21
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K14544
[Presentation] Self-Heat Recuperation Technology for Sustainable Process Design2015
- Author(s)
  Yasuki Kansha, Hiroyuki Mizuno, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  2015 AIChE Annual Meeting
- Place of Presentation
  Salt Lake City, UT, USA
- Year and Date
  2015-11-08
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Numerical Investigation of Energy Saving Potential for Self-Heat Recuperation2015
- Author(s)
  Yasuki Kansha, Hiroyuki Mizuno, Yui Kotani, Masanori Ishizuka, Chunfeng Song, Qian Fu, Atsushi Tsutsumi
- Organizer
  18th Conference Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction
- Place of Presentation
  Kuching, Malaysia
- Year and Date
  2015-08-23
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Modeling of Flow Behavior at Downer and Riser in Triple bed Circulating Fluidized Bed Using Equivalent Circuit2015
- Author(s)
  Masanori Ishizuka, Hiroyuki Mizuno, Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  18th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction
- Place of Presentation
  Kuching, Sarawak, MALAYSIA
- Year and Date
  2015-08-23
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] パルス状ガス供給による循環流動層の粒子循環量制御2015
- Author(s)
  石束真典, 水野寛之, 甘蔗寂樹, 堤敦司
- Organizer
  第21回流動化・粒子プロセッシングシンポジウム
- Place of Presentation
  九州工業大学百周年中村記念館, 北九州
- Year and Date
  2015-12-10
- Data Source
  KAKENHI-PROJECT-15H05554
[Presentation] Experimental investigation of self-heat recuperation using magnetocaloric effect2014
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  17th International Conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction (PRES 2014)
- Place of Presentation
  Prague, Czech Republic
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Experimental investigation of self-heat recuperation using magnetocaloric effect2014
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  17th Conference Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction
- Place of Presentation
  Prague, Czech Republic
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Magnetocaloric self-heat recuperation cycle for energy saving in thermal processes2014
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  6th IIR/IIF International Conference on Magnetic Refrigeration (THERMAG VI)
- Place of Presentation
  Victoria, Canada
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] 循環流動層の等価回路モデル化2014
- Author(s)
  石束真典, 甘蔗寂樹, 堤敦司
- Organizer
  化学工学会第79年会
- Place of Presentation
  岐阜大学柳戸キャンパス
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] Exergy loss minimization for chemical processes2013
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Yui Kotani, Atsushi Tsutsumi
- Organizer
  International Conference on Green Energy and Technology
- Place of Presentation
  北九州
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Simulation and Experimental Evaluation of Self-heat Recuperation Using Magnetocaloric Effect2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  International Symposium on EcoTopia Science 2013
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Active magnetic regenerative heat circulator for energy saving in thermal process2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  16th Conference Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction (PRES2013)
- Place of Presentation
  Rodos, Greece
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Proposition of active regenerative heat circulator for self-heat recuperation in thermal processes2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  Postgraduate Colloquium for Environmental Research 2013
- Place of Presentation
  Genting, Malaysia
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Exergy Loss Minimization for Chemical Processes2013
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Yui Kotani, Atsushi Tsutsumi
- Organizer
  International Conference on Green Energy and Technology
- Place of Presentation
  北九州
- Invited
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Simulation and experimental evaluation of self-heat recuperation using magnetocaloric effect2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  International Symposium on EcoTopia Science 2013
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Evaluation of exergy loss in heat exchangers2013
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Yui Kotani, Atsushi Tsutsumi
- Organizer
  9^<th> World Congress of Chemical Engineering, 15^<th> Asian Pacific Confederation of Chemical Engineering Congress
- Place of Presentation
  Seoul, Korea
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Experimental investigation of self-heat recuperation using magnetocaloric effect for energy saving in thermal process2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  2013 American Institute of Chemical Engineers Annual Meeting
- Place of Presentation
  San Francisco, USA
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Proposition of active magnetic regenerative heat circulator for self-heat recuperation in thermal processes2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  Postgraduate Colloquium for Environmental Research 2013
- Place of Presentation
  Genting Highlands, Malaysia
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Experimental Investigation of Self-Heat Recuperation Using Magnetocaloric Effect for Energy Saving in Thermal Processes2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi
- Organizer
  2013 American Institute of Chemical Engineers Annual Meeting
- Place of Presentation
  San Francisco, USA
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Active magnetic regenerative heat circulator for energy saving in thermal process2013
- Author(s)
  Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  16th International Conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction (PRES 2013)
- Place of Presentation
  Rodos, Greece
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Evaluation of Exergy Loss in Heat Exchangers2013
- Author(s)
  Yasuki Kansha, Masanori Ishizuka, Yui Kotani, Atsushi Tsutsumi
- Organizer
  9th World Congress of Chemical Engineering, 15th Asian Pacific Confederation of Chemical Engineering Congress
- Place of Presentation
  Seoul, Korea
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] 磁気熱量効果を適用した自己熱再生システムの実験研究2013
- Author(s)
  小谷唯、甘蔗寂樹、石束真典、堤敦司
- Organizer
  化学工学会第45秋季大会
- Place of Presentation
  岡山
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] Modeling of Triple Bed Circulating Fluidized Bed Coal Gasifier Flow Behavior Based on Equivalent Circuit Model2013
- Author(s)
  Masanori Ishizuka, Yuping Liu, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  International Conference of Coal Science & Technology 2013
- Place of Presentation
  Pennsylvania, USA
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] Modeling of triple bed circulating fluidized bed coal gasifier flow behavior based on equivalent circuit model2013
- Author(s)
  Masanori Ishizuka, Yuping Liu, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  International Conference on Green Energy and Technology
- Place of Presentation
  Kitakyushu
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] An Analysis Method for Fluidized Bed Flow Behavior using Electric Circuit Analogy2013
- Author(s)
  Masanori Ishizuka, Yuji Yoshie, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  Fluidization XIV
- Place of Presentation
  Noordwijkerhout, The Netherlands
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] Self-heat recuperation using magnetocaloric effect2012
- Author(s)
  Yui Kotani、Yasuki Kansha、Atsushi Tsutsumi
- Organizer
  15th International Conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction (PRES 2012)
- Place of Presentation
  Prague, Czech Republic
- Data Source
  KAKENHI-PROJECT-24760727
[Presentation] 流動層型蒸発器を海水淡水化プロセスに適用した際の非流動化に関する検討
- Author(s)
  水野寛之, 甘蔗寂樹, 石束真典, 堤敦司
- Organizer
  化学工学会第46回, 秋季大会
- Place of Presentation
  福岡　九州大学
- Year and Date
  2014-09-17 – 2014-09-19
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] 三塔式循環流動層における流動特性解析のための等価回路モデル化
- Author(s)
  石束真典, 甘蔗寂樹, 堤敦司
- Organizer
  化学工学会第46回, 秋季大会
- Place of Presentation
  福岡　九州大学
- Year and Date
  2014-09-17 – 2014-09-19
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] Thermal seawater desalination process using fluidized bed evaporator
- Author(s)
  Hiroyuki Mizuno, Yasuki Kansha, Masanori Ishizuka,Atsushi Tsutsumi
- Organizer
  The 7th World Congress on Particle Technology (WCPT7)
- Place of Presentation
  Beijing, China
- Year and Date
  2014-05-19 – 2014-05-22
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] Modeling of Triple bed Circulating Fluidized Bed Flow Behavior Using Equivalent Electrical Circuit
- Author(s)
  Masanori Ishizuka, Hiroyuki Mizuno, Yui Kotani, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  4th Asian Conference on Innovative Energy and Environmental Chemical Engineering (ASCON-IEEChE 2014)
- Place of Presentation
  Yeosu, Korea
- Year and Date
  2014-11-09 – 2014-11-12
- Data Source
  KAKENHI-PROJECT-25420798
[Presentation] Modeling of Fluidized Bed Flow Behavior Using Electric Equivalent Circuit
- Author(s)
  Masanori Ishizuka, Hiroyuki Mizuno, Yasuki Kansha, Atsushi Tsutsumi
- Organizer
  The 7th World Congress on Particle Technology (WCPT7)
- Place of Presentation
  Beijing, China
- Year and Date
  2014-05-19 – 2014-05-22
- Data Source
  KAKENHI-PROJECT-25420798

1. Ishizuka Masanori (10386716)

# of Collaborated Projects: 2 results

# of Collaborated Products: 14 results

KANSHA Yasuki 甘蔗 寂樹

KANSHA YASUKI 甘蔗 寂樹

Research Projects

Research Products

Co-Researchers

Development of energy harvesting sensors using magnetic moment changePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Power generation from low temperature waste heat using magnetic phase transitionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Design of energy-saving gas separation process using circulating fluidized bedPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Modeling of Fluidized Bed Flow Behavior

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fundamental research on an exergy recuperation device using magnetocaloric effectPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Energy Harvesting Wireless Sensors Using Magnetic Phase Transition2022

Author(s)

Journal Title

DOI

ISBN

Data Source

[Journal Article] Efficient Power Generation from Low Temperature Heat Source2017

Author(s)

Journal Title

Data Source

[Journal Article] Design of Energy-Saving Carbon Dioxide Separation Process Using Fluidized Bed2017

Author(s)

Journal Title

DOI

Data Source

[Journal Article] CO2 Separation Process Using Circulating Fluidized Bed Based on Exergy Recuperation2016

Author(s)

Journal Title

Data Source

[Journal Article] Control of Solid Mass Flow Rate in Circulating Fluidized Bed by a Pulsed Gas Flow2016

Author(s)

Journal Title

Data Source

[Journal Article] Numerical Investigation of Energy Saving Potential for Self-Heat Recuperation2015

Author(s)

Journal Title

Data Source

[Journal Article] Modelling of Flow Behaviour at Downer and Riser in Triple Bed Circulating Fluidized Bed Using Equivalent Circuit2015

Author(s)

Journal Title

Data Source

[Journal Article] Experimental investigation of an active magnetic regenerative heat circulator applied to self-heat recuperation technology2014

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Experimental Investigation of an Active Magnetic Regenerative Heat Circulator Applied to Self-Heat Recuperation Technology2014

Author(s)

Journal Title

Data Source

[Journal Article] Active Magnetic Regenerative Heat Circulator for Energy Saving in Thermal Process2013

Author(s)

Journal Title

Data Source

[Journal Article] Active magnetic regenerative heat circulator for energy saving in thermal process2013

KANSHA Yasuki 甘蔗寂樹

KANSHA YASUKI 甘蔗寂樹

[Presentation] An Energy-Saving Carbon Dioxide Capture Using 　a Circulating Fluidized Bed2017