OGAWA Toshio 小川登志男

… Alternative Names

Ogawa Toshio 小川登志男

Less

Researcher Number	10708910
Affiliation (Current)	2025: 愛知工業大学, 工学部, 准教授
Affiliation (based on the past Project Information) *help	2023: 愛知工業大学, 工学部, 准教授 2022: 名古屋大学, 工学研究院, 講師 2021 – 2022: 名古屋大学, 工学研究科, 講師
Review Section/Research Field	Principal Investigator Basic Section 26040:Structural materials and functional materials-related Except Principal Investigator Basic Section 26040:Structural materials and functional materials-related / Transformative Research Areas, Section (II) / Basic Section 26010:Metallic material properties-related
Keywords	Principal Investigator 初期組織 / 強度延性バランス / フェライト / 析出 / 相変態 / 再結晶 / 強度-延性バランス / 複相組織 / 鉄鋼材料 Except Principal Investigator マテリアルズインフォマティクス … More / 敵対的生成ネットワーク / SliceGAN / データサイエンス / マテリアルインフォマティクス / マテリアルDX / 画像創成 / SRGAN / CycleGAN / GAN / 鉄鋼材料 / 完全バーチャル材料設計 / フェイク組織画像 / 有限要素法 / DCGAN / 潜在変数からの材料設計 / 潜在変数の逆解析 / 画像生成 / 画像認識 / データベース / 三次元構造 / 超温度場 / 順・逆解析 / 積層造形 / 走査透過型電子顕微鏡 / 敵対定期生成ネットワーク / 深層学主 / 非平衡フェーズフィールド法 / 記述子 / 階層組織 / 変調構造 / CNN画像回帰 / 畳み込みニューラルネットワーク / データ同化 / ボイド / 転位セル / 電気抵抗率変化 / 引張変形 / 金属組織 / 動的挙動 / 電気抵抗率 / 転位 Less

電気抵抗率測定を用いた微細組織の動的挙動観察手法の構築
- Principal Investigator
  
  高田健
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26010:Metallic material properties-related
- Research Institution
  Daido University
Materials image engineering: Genneration of synthetic mutiple pahse microstructural imge by adversarial adversarial network
- Principal Investigator
  
  足立吉隆
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Nagoya University
Increment of the strength and ductility of high-strength multi-phase steel by optimizing the characteristics of ferritePrincipal Investigator
- Principal Investigator
  
  Ogawa Toshio
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 26040:Structural materials and functional materials-related
- Research Institution
  Aichi Institute of Technology
  Nagoya University
Materials Informatics for Creation of Materials by Super Thermal Field
- Principal Investigator
  
  足立吉隆
- Project Period (FY)
  2021 – 2025
- Research Category
  
  Grant-in-Aid for Transformative Research Areas (A)
- Review Section
  
  Transformative Research Areas, Section (II)
- Research Institution
  Nagoya University

All 2024 2023 2022 2021

All Journal Article Presentation

[Journal Article] Image regression analysis for linking the microstructure and property of steel2024
- Author(s)
  Sawai Kengo、Chen Ta-Te、Sun Fei、Ogawa Toshio、Adachi Yoshitaka
- Journal Title
  
  Results in Materials
  
  Volume: 21 Pages: 100526-100526
- DOI
  10.1016/j.rinma.2023.100526
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-21H05194, KAKENHI-PROJECT-23K23075
[Journal Article] Simulation-aided analysis of ferrite recrystallization behavior of pure iron with different dislocation characters2023
- Author(s)
  Kotaro Iguchi, Toshio Ogawa, Fei Sun, Yoshitaka Adachi
- Journal Title
  
  Journal of Materials Research and Technology
  
  Volume: 24 Pages: 6558-6566
- DOI
  10.1016/j.jmrt.2023.04.233
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21K14423
[Journal Article] Modulated Structure Formation in Dislocation Cells in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion2023
- Author(s)
  Fei Sun, Toshio Ogawa, Yoshitaka Adachi, Kazuhisa Sato, Shunya Takagi, Goro Miyamoto, Asuka Suzuki, Akinori Yamanaka, Nobuo Nakada, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 64 Issue: 6 Pages: 1143-1149
- DOI
  10.2320/matertrans.MT-ME2022004
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2023-06-01
- Language
  English
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-21H05196, KAKENHI-PROJECT-20K15057, KAKENHI-PLANNED-21H05193, KAKENHI-PLANNED-21H05194, KAKENHI-PLANNED-21H05197
[Journal Article] Big-volume SliceGAN for improving a synthetic 3D micro-structure image of additive-manufactured TYPE 316L steel2023
- Author(s)
  Keiya Sugiura, Toshio Ogawa, Yoshitaka Adachi, Fei Sun, Asuka Suzuki, Akinori Yamanaka, Nobuo Nakada, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi
- Journal Title
  
  Journal of Imaging
  
  Volume: 6
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K23075
[Journal Article] Evaluation of the tensile properties of vanadium-added steels with different ferrite and pearlite hardness ratios2023
- Author(s)
  Minato Kawamura, Toshio Ogawa, Fei Sun, Yoshitaka Adachi
- Journal Title
  
  Journal of Materials Engineering and Performance
  
  Volume: - Issue: 13 Pages: 6816-6824
- DOI
  10.1007/s11665-023-08436-w
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21K14423
[Journal Article] Big-Volume SliceGAN for Improving a Synthetic 3D Microstructure Image of Additive-Manufactured TYPE 316L Steel2023
- Author(s)
  Sugiura Keiya、Ogawa Toshio、Adachi Yoshitaka、Sun Fei、Suzuki Asuka、Yamanaka Akinori、Nakada Nobuo、Ishimoto Takuya、Nakano Takayoshi、Koizumi Yuichiro
- Journal Title
  
  Journal of Imaging
  
  Volume: 9 Issue: 5 Pages: 90-90
- DOI
  10.3390/jimaging9050090
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PLANNED-21H05197, KAKENHI-PLANNED-21H05193, KAKENHI-PLANNED-21H05194, KAKENHI-PROJECT-23K23075
[Journal Article] Generative Adversarial Networks‐Based Synthetic Microstructures for Data‐Driven Materials Design2022
- Author(s)
  Narikawa Ryuichi、Fukatsu Yoshihito、Wang Zhi‐Lei、Ogawa Toshio、Adachi Yoshitaka、Tanaka Yuji、Ishikawa Shin
- Journal Title
  
  Advanced Theory and Simulations
  
  Volume: 5 Issue: 5 Pages: 2100470-2100470
- DOI
  10.1002/adts.202100470
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K23075
[Journal Article] Hourly Work of 3D Microstructural Visualization of Dual Phase Steels by SliceGAN2022
- Author(s)
  Sugiura Keiya、Ogawa Toshio、Adachi Yoshitaka
- Journal Title
  
  Advanced Theory and Simulations
  
  Volume: 5 Issue: 7 Pages: 2200132-2200132
- DOI
  10.1002/adts.202200132
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-21H05194, KAKENHI-PROJECT-23K23075
[Journal Article] Three-dimensional analysis of ferrite grains recrystallized in low-carbon steel during annealing2021
- Author(s)
  Kengo Horiuchi, Toshio Ogawa, Zhi-Lei Wang, Yoshitaka Adachi
- Journal Title
  
  Materials
  
  Volume: 14 Issue: 15 Pages: 4154-4154
- DOI
  10.3390/ma14154154
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] Microstructural evolution during deformation in aluminum based on image analysis of TEM micrographs2024
- Author(s)
  Yosuke Nakashima, Ken Takata, Shigeo Arai, Ken-ichi Ikeda, and Toshio Ogawa
- Organizer
  The 19th International Conference on Aluminum Alloys
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K04676
[Presentation] 敵対的生成ネットワークとベイズ最適化による二相組織鋼の強度延性バランスの最大化2024
- Author(s)
  深津義士、陳達徳、孫飛、足立吉隆、小川登志男、渡邊育夢、小島真由美、石川伸
- Organizer
  日本鉄鋼協会2023年度春季講演大会（東京理解大学）
- Data Source
  KAKENHI-PROJECT-23K23075
[Presentation] 初期組織の異なる低炭素鋼におけるフェライト再結晶挙動解析 (2): －二相域焼鈍中の組織形成におけるフェライト再結晶の役割－2024
- Author(s)
  小川登志男、小勝康平、足立吉隆、段野下宙志
- Organizer
  日本鉄鋼協会第187回春季講演大会
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] フェライト相制御によるDual Phase鋼の高強度・高延性化2023
- Author(s)
  小勝康平、陳達徳、孫飛、足立吉隆、小川登志男
- Organizer
  日本金属学会・日本鉄鋼協会東海支部第33回材料フォーラムTOKAI
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] Nano-scaled solidification microstructure characteristics in 316L stainless steel fabricated by laser powder bed fusion2023
- Author(s)
  Fei Sun, Junki Inagaki, Toshio Ogawa, Yoshitaka Adachi, Kazuhisa Sato,Goro Miyamoto, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi
- Organizer
  日本金属学会秋季（第173回）講演大会(富山大学）
- Data Source
  KAKENHI-PLANNED-21H05194
[Presentation] 実験・シミュレーションの併用による純鉄の再結晶挙動における転位性格の役割解明2023
- Author(s)
  井口航太朗、孫飛、小川登志男、足立吉隆
- Organizer
  日本鉄鋼協会第185回春季講演大会
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] 相間硬度比の異なるフェライト / パーライト鋼の引張特性評価2023
- Author(s)
  川村南斗、孫飛、小川登志男、足立吉隆
- Organizer
  日本鉄鋼協会第185回春季講演大会
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] SliceGANによる材料組織の三次元可視化の超効率化2023
- Author(s)
  杉浦圭哉、小川登志男、足立吉隆
- Organizer
  日本金属学会秋季（第171回）講演大会(福岡工業大学）
- Data Source
  KAKENHI-PROJECT-23K23075
[Presentation] 画像解析を用いたアルミニウム中の転位セル形成機構の調査2023
- Author(s)
  中嶋洋介、伊藤良太、久保則文、西田光紀、荒井重勇、池田賢一、小川登志男、高田健
- Organizer
  材料フォーラムtokai
- Data Source
  KAKENHI-PROJECT-22K04676
[Presentation] 積層造形法により作製したSUS316L組織のスケールブリッジング解析2023
- Author(s)
  稲垣洵希, 陳達徳, 孫飛, 足立吉隆, 小川登志男, 奥川将行 , 小泉雄一郎, 中野貴由
- Organizer
  日本金属学会秋季（第173回）講演大会(富山大学）
- Data Source
  KAKENHI-PLANNED-21H05194
[Presentation] SliceGANによる材料組織の三次元可視化の超効率化2023
- Author(s)
  杉浦　圭哉、小川　登志男、足立吉隆
- Organizer
  日本金属学会秋季（第171回）講演大会(福岡工業大学）
- Data Source
  KAKENHI-PLANNED-21H05194
[Presentation] 画像解析を用いたアルミニウム中の転位のセル形成機構の調査2023
- Author(s)
  中嶋洋介、伊藤良太、久保則文、西舘光紀、高田健、荒井重勇、池田賢一、小川登志男
- Organizer
  2023日本金属学会秋期大会
- Data Source
  KAKENHI-PROJECT-22K04676
[Presentation] Modulated structure formation in dislocation cells in 316L stainless steel fabricated by laser powder bed fusion2023
- Author(s)
  Fei Sun, Toshio Ogawa, Yoshitaka Adachi, Kazuhisa Sato, Shunya Takagi, Goro Miyamoto, Asuka Suzuki, Akinori Yamanaka, Nobuo Nakada, Takuya Ishimoto, Takayoshi Nakano, Yuichiro Koizumi
- Organizer
  日本金属学会秋季（第172回）講演大会(東京大学）
- Data Source
  KAKENHI-PLANNED-21H05194
[Presentation] 敵対的生成ネットワークにより生成したバーチャル二相組織鋼の有限要素法による特性解析2022
- Author(s)
  深津義士、小川登志男、足立吉隆
- Organizer
  日本鉄鋼協会
- Data Source
  KAKENHI-PROJECT-23K23075
[Presentation] SliceGANによる材料組織の三次元可視化の超効率化2022
- Author(s)
  杉浦圭哉、孫飛、小川登志男、足立吉隆
- Organizer
  日本金属学会秋季講演大会(福岡工業大学）
- Invited
- Data Source
  KAKENHI-PLANNED-21H05194
[Presentation] 組織形成シミュレーションの援用による純鉄の再結晶における転位性格の役割解明2022
- Author(s)
  井口航太朗、孫飛、小川登志男、足立吉隆
- Organizer
  日本金属学会・日本鉄鋼協会東海支部第32回材料フォーラムTOKAI
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] SliceGANによる材料組織の三次元可視化の超効率化2022
- Author(s)
  杉浦圭哉、孫飛、小川登志男、足立吉隆
- Organizer
  日本金属学会２０２２年秋期講演大会
- Data Source
  KAKENHI-PLANNED-21H05194
[Presentation] 転位性格を考慮した純鉄における再結晶挙動の定量解析2022
- Author(s)
  井口航太朗、孫飛、小川登志男、足立吉隆
- Organizer
  日本材料学会第8回材料WEEK
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] Characterization of recrystallization behavior in pure iron and low-carbon steel by three-dimensional microstructural analysis2022
- Author(s)
  Toshio Ogawa, Kengo Horiuchi, Zhilei Wang, Yoshitaka Adachi
- Organizer
  The 7th International Conference on Advanced Steels
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] 鉄鋼材料における再結晶粒の三次元定量解析2021
- Author(s)
  堀内健吾, 王志磊, 小川登志男, 足立吉隆
- Organizer
  日本熱処理技術協会
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] 低炭素鋼板における再結晶フェライト粒の三次元構造解析2021
- Author(s)
  堀内健吾, 王志磊, 小川登志男, 足立吉隆
- Organizer
  日本鉄鋼協会
- Data Source
  KAKENHI-PROJECT-21K14423
[Presentation] 析出強化フェライトを活用した複相組織鋼の相間硬度比および引張特性評価2021
- Author(s)
  川村南斗, 王志磊, 小川登志男, 足立吉隆
- Organizer
  日本金属学会・日本鉄鋼協会東海支部
- Data Source
  KAKENHI-PROJECT-21K14423

1. 足立吉隆 (90370311)

# of Collaborated Projects: 2 results

# of Collaborated Products: 13 results
2. 高田健 (60373586)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
3. 池田賢一 (20335996)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
4. 山中晃徳 (50542198)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
5. 陳達徳 (20983084)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
6. 石本卓也

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

OGAWA Toshio 小川 登志男

Ogawa Toshio 小川 登志男

Research Projects

Research Products

Co-Researchers

電気抵抗率測定を用いた微細組織の動的挙動観察手法の構築

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Materials image engineering: Genneration of synthetic mutiple pahse microstructural imge by adversarial adversarial network

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Increment of the strength and ductility of high-strength multi-phase steel by optimizing the characteristics of ferritePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Materials Informatics for Creation of Materials by Super Thermal Field

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Journal Article] Image regression analysis for linking the microstructure and property of steel2024

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Simulation-aided analysis of ferrite recrystallization behavior of pure iron with different dislocation characters2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Modulated Structure Formation in Dislocation Cells in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion2023

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Big-volume SliceGAN for improving a synthetic 3D micro-structure image of additive-manufactured TYPE 316L steel2023

Author(s)

Journal Title

Data Source

[Journal Article] Evaluation of the tensile properties of vanadium-added steels with different ferrite and pearlite hardness ratios2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Big-Volume SliceGAN for Improving a Synthetic 3D Microstructure Image of Additive-Manufactured TYPE 316L Steel2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Generative Adversarial Networks‐Based Synthetic Microstructures for Data‐Driven Materials Design2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Hourly Work of 3D Microstructural Visualization of Dual Phase Steels by SliceGAN2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Three-dimensional analysis of ferrite grains recrystallized in low-carbon steel during annealing2021

Author(s)

Journal Title

DOI

Data Source

[Presentation] Microstructural evolution during deformation in aluminum based on image analysis of TEM micrographs2024

Author(s)

Organizer

Data Source

OGAWA Toshio 小川登志男

Ogawa Toshio 小川登志男