SAKANE Masako 坂根政男

… Alternative Names

SAKANE Masao 坂根政男

Less

Researcher Number	20111130
Other IDs
External Links
Affiliation (Current)	2025: 株式会社神戸工業試験場(生産本部技術開発部), 技術企画室, 研究員
Affiliation (based on the past Project Information) *help	2019 – 2020: 立命館大学, 総合科学技術研究機構, 上席研究員 1998 – 2018: 立命館大学, 理工学部, 教授 1994 – 1996: Faculty of Science and Engineering, Ritsumeikan University, 理工学部, 教授 1991 – 1993: 立命館大学, 理工学部, 助教授 1986 – 1989: Faculty of Science and Engineering, Ritsumeikan University, 理工学部, 助手 1986: 立命館大, 理工学部, 助手
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials / 機械材料工学 Except Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials / 材料力学 / Structural/Functional materials / Basic Section 18010:Mechanics of materials and materials-related / 機械材料工学 / Structural/Functional materials / Recycling engineering
Keywords	Principal Investigator 高温 / 超合金 / クリープ疲労 / Superalloy / 多軸 / 多軸応力 / 有限要素法 / High temperature / 単結晶 / 低サイクル疲労 … More / 非破壊検査 / コーティング / 表皮効果 / 異方性 / Creep-fatigue / Multiaxial stress / 疲労 / 単結晶超合金 / クリープ係数 / クリープ指数 / 材料力学 / インデンテーション / クリープ / 高温強度 / Strain Range Partitioning Method / Linear Summation Damage Rule / FEM Analysis / Notch Effect / Low Cycle Fatigue / Elevated Temperature / Long Term Hold-Time / Creep-Fatigue / 寿命予測 / ひずみ範囲分割法 / 線形損傷則 / 切欠き効果 / 長時間保持 / Nondestructive inspection / Damage evaluation / Finite element analysis / Skin effect / Inner defect / Multiple cracks / A. C. potential method / 寿命評価 / 動電磁場 / 有限要素法解析 / 内部欠陥検出 / 交流電位差 / 損傷評価 / 内部欠陥 / 多数き裂 / 交流電位差法 / coating / multiple crack / superalloy / skin effect / alternating current / crack detection / potential method / Nontructive testing / 複数き裂 / き裂検出 / き裂 / 交流 / 電位差法 / 損傷量評価 / Crystal slip theory / Elastic constant / Anisotropy / Single Crystal / 結晶塑性 / 結晶塑性理論 / 弾性定数 / Anisotropy of elastic constant / Constitutive relation / Directionally solidified / 弾性異方性 / 構成関係 / 一方向凝固材 / Yield surface / Constitutive equation / Single crystal / Slip theory / Low cycle fatigue / 結晶方向 / 多軸低サイクル疲労 / 一方向凝固超合金 / 降伏曲面 / 一方向凝固 / 構成式 / すべり理論 / 低サイクル / 十字型試験片 … More Except Principal Investigator 電子デバイス / 寿命評価 / 低サイクル疲労 / 金属疲労 / 構成式 / Creep / クリープ / 高温 / 交流電位差法 / コーティング材 / 超合金 / ヤング率 / 弾性定数 / 多軸負荷 / クリープ疲労 / Ti-Si / Size Effect / Larson-Miller Parameter / Constitutive Equation / Electronic Device / Rupture Time / Solder / 寸法効果 / ラーソン・ミラー・パラメータ / 破断時間 / はんだ / 一方向凝固材 / 有限要素法 / 交流 / 異方性 / High temperature / Superalloy / Young's modulus / Thin film / Electric device / 固有振動数 / 曲げ試験 / 薄膜 / 解析ソフト / 疲労損傷 / 多軸応力 / 疲労 / き裂 / 組織制御 / ナノ結晶 / 強度 / 疲労強度 / ステンレス鋼 / 相変態 / 構成関係 / 強度評価 / 材料強度 / inside defect / spectrum analyze / surface crack / skin effect / crack detection / potential method / alternative current / 境界要素法 / き裂検出 / 直流電位差法 / 内部き裂 / 周波数分析 / 表面き裂 / 表皮効果 / き裂計測 / 電気ポテンシャル法 / anisotropy / elastic modulus / creep-fatigue / low cycle fatigue / directionally solidified material / superalloy / high temperature / 繰り返し構成関係 / 一方向凝固 / クリ-プ疲労 / Plasticity-creep interaction / Inelastic meterial behaviour / Constitutive equations / 非弾性 / 塑性ークリープ相互作用 / 塑性-クリープ相互作用 / 非弾性挙動 / X-ray Diffraction / Dislocation / Constitutive Relation / Biaxial Stress / Low Cycle Fatigue / High Temperature / 非比例負荷 / X線 / 転位 / 多軸 / ラーソ・ミラー・パラメータ / tungsten / superplasticity / high temperature deformation / thermomechanical heat treatment / mechanical milling / nano crystal / メカニカルアロイング / ヘプタン添加 / 成形 / アモルファス / 焼結性 / 非平衡粉末 / ナノ結晶粒組織制御 / アモルファス相 / LIGAプロセス / 擬似的超塑性変形 / Ti-Si系 / 非平衡組織 / レニウム / タングステン / 超塑性変形 / 高温変形 / 加工熱処理 / メカニカルミリング / ラーソンミラーパラメータ / 構成比 / Pollycrystalline Alloys / DS Superalloy / Single Crystal Ni-base Superalloy / Medelling / Life Prediction / Thermo-Mechanical Fatigue / Coatings / Industrial Gas Turbines / 単結晶 / Ni基超合金 / 多結晶材 / 単結晶Ni基超合金 / モデル化 / 寿命推定法 / 熱疲労 / 産業用ガスタービン / Grain Refinement / Microstructure / Strength / Hachanical Property / Reemystallization / HS-PM Process / Stainless Steel / Powder Metallurgy / 積層欠陥エネルギー / 射出成形 / 結晶粒微細化 / フェライト変態 / 超高強度化 / 超強加工 / 粉末治金 / 微細化 / 組織 / 機械的性質 / 再結晶 / HS-PMプロセス / 粉末冶金 / Nondestructive test / Ac potential method / Crack / Fatigue / Coating material / 電位差法 / 非破壊検査 / Permalloy thin film / Cr thin film / Vibrating reed test / 3-points bending test / スパッタリングパ-マロイ薄膜 / スパッタリングCr薄膜 / 振動リ-ド法 / 3点曲げ試験法 / Anisotropy of elastic constant / Constitutive relation / Greep-fatigue / Directionally solidified / クリーブ疲労 / 余寿命推定 / 損傷量評価 / Eigen frequency / Bending test / Elastic modulus / 組合せばり / マイクロデバイス / 応力拡大係数 / 破壊力学 / 画像相関法 / 画像処理 / ヘルスモニタリング / 損傷力学 / 変形挙動 / 均一伸び / メゾ結晶 / セラミックス / 鉄合金 / チタン合金 / 靱性 / 延性 / チタン / 2相組織 / 高延性 / 高強度 / 調和組織 / 相当ひずみ / 応力集中 / 鉛フリーはんだ / 強度設計 / 構造・機能材料 / 機械材料・材料力学 / PET / マイクロ波 / 環境 / スマート / リサイクル / コンクリート Less

Experimental Verification of Fatigue Strength Properties under Non-proportional Multiaxial Variable Loading and Improvement of Fatigue Strength Evaluation Method
- Principal Investigator
  
  Itoh Takamoto
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Ritsumeikan University
An analytical and experimental research for extracting creep exponents and coefficients from indentation creep tests.Principal Investigator
- Principal Investigator
  
  Sakane Masao
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Investigation and Evaluation of Fatigue Property and Damage under Non-proportional Multiaxial Variable Loading
- Principal Investigator
  
  Itoh Takamoto
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Development of a Design Method for Advanced Ni-base Single Crystal Superalloy Blades in Gas TurbinesPrincipal Investigator
- Principal Investigator
  
  Sakane Masao
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Developments of Damage Model and Analytical Tool for Evaluation of Fatigue Strength under Multiaxial Random Loading
- Principal Investigator
  
  ITOH Takamoto
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
  University of Fukui
Creep-Fatigue Life Estimation for Nickel Base Single Crystal Superalloy under Multiaxial LoadingPrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Creation of High Performance Nano-Meso Harmonic Structure Materials and the Evaluation of Their Mechanical Properties
- Principal Investigator
  
  AMEYAMA Kei
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ritsumeikan University
Development of Real-time Crack Monitoring System Based on Non-contact Measurement of Displacement Field
- Principal Investigator
  
  KUSAKA Takayuki
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Development of Multiaxial Creep-Fatigue Life Evaluation for Nickel-Base Single Crystal Superalloy Using Cruciform SpecimenPrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Creep-Fatigue Life Evaluation for Lead-Free Solder Connections in Electronic Devices
- Principal Investigator
  
  NOZAKI Mineo
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hyogo Prefectural Institute of Technology
Fatigue Life Property and Design Procedure under Multiaxial Non-proportional Loading
- Principal Investigator
  
  ITOH Takamoto
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  University of Fukui
Development of Non-Equilibrium PM Process to Precision Forming of Hard Materials using Pseud-Superplasticity
- Principal Investigator
  
  AEYAMA Kei
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ritsumeikan University
Development of Miniature Creep Testing for Environment-Friendly Solders
- Principal Investigator
  
  TAKADA Akiko
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Maizuru National College of Technology
再生PET樹脂を利用した自己破砕性スマートコンクリートの開発
- Principal Investigator
  
  KUSAKA Takayuki
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Recycling engineering
- Research Institution
  Ritsumeikan University
Development of Miniature Creep Testing for Environment Friendly Solders
- Principal Investigator
  
  TAKADA Akio
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Maizuru National College of Technology
Crack damage detection by ultra-high frequency A. C. potential method for coated single crystal superalloysPrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Microstructure control and ultra-high strengthening of stainless steel by the room temperature recrystallization
- Principal Investigator
  
  AMEYAMA Kei
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Ritsumeikan University
Systematic Research on Hig-Strength and High Performance Ni-Base Superalloy Coatings for Advanced Gas Turbines.
- Principal Investigator
  
  OKAZAKI Masakazu
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  The University of Tokyo
  Nagaoka University of Technology
Development of Crack Damage Evaluation Method for Utilizing High Frequency A.C.Potenial MethodPrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University
Creep-fatigue damage evaluation for coated Ni-base superalloys by a.c.potential method.
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  RITSUMEIKAN UNIVERSITY
Multiaxial Creep-fatigue criterion of Ni-base single crystal superalloys.Principal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  RITSUMEIKAN UNIVERSITY
Development of Young's Modulus Measurement System for Anisotropic Thin Films
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  RITSUMEIKAN UNIVERSITY
Greep-Fatigue Damage Evaluation of Coated Superalloy by A.C.Potential Method
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  RITSUMEIKAN UNIVERSITY
Multiaxial Low Cycle Fatigue Criterion for Advanced Ni-base Directionally Solidified SuperalloyPrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  RITSUMEIKAN UNIVERSITY
Young's Modulus Measurement of Thin Films for Electric Devices
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  RITSUMEIKAN UNIVERSITY
High Temperature Multiaxial Creep-Fatigue and Consitutive Equation for Ni-Base Single Crystal SuperalloyPrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械材料工学
- Research Institution
  Ritsumeikan University
Cyclic Constitutive Relation and Creep-Fatigue Life of Directionally Solidified Superalloy
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械材料工学
- Research Institution
  Faculty of Science and Engineering, Ritsumeikan University
Surface Crack Detection by A.C. Potential Method
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  材料力学
- Research Institution
  Faculty of Science and Engineering Ritsumeikan University
Evaluation of Inelastic Constitutive Equations under Plasticity-creep Interaction Condition subjected to Multiaxial Stresses
- Principal Investigator
  
  INOUE Tatsuo
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  材料力学
- Research Institution
  Kyoto University
Life Prediction of Long-Term Creep-FatiguePrincipal Investigator
- Principal Investigator
  
  SAKANE Masao
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械材料工学
- Research Institution
  Ritsumeikan Universty
Cyclic Constitutive Relation and Estimation of Biaxial Low Cycle Fatigue Life at Elevated Temperature
- Principal Investigator
  
  OHNAMI Masateru
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  Ritsumeikan University

[Book] Factual Database on Tensile, Creep, Low Cycle Fatigue and Creep-fatigue of Lead and Lead-free Solders Vol. I～IV2013
- Author(s)
  Masao Sakane（主査）, Isamu Nonaka, Takamoto Itoh, Noritake Hiyoshi, Mineo Nozaki, Akira Ueno, Takaei Yamamoto, Shengde Zhang
- Total Pages
  2354
- Publisher
  日本材料学会
- Data Source
  KAKENHI-PROJECT-23560105
[Book] Factual Database on Tensile, Creep, Low Cycle Fatigue and Creep-fatigue of Lead and Lead-free Solders2013
- Author(s)
  Masao Sakane, Isamu Nonaka, Takamoto Itoh, Noritake Hiyoshi, Mineo Nozaki, Akira Ueno, Takaei Yamamoto, Shengde Zahng
- Total Pages
  2354
- Publisher
  (公社)日本材料学会( Vol.I～IV)
- Data Source
  KAKENHI-PROJECT-23560105
[Book] 例題で学ぶMarc有限要素法解析入門2011
- Author(s)
  坂根政男(編者),伊藤隆基,末松芳幸,張聖徳,濱田直巳,旭由雅健,元家勝彦,山本隆栄
- Total Pages
  225
- Publisher
  丸善出版(株)
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] A new extraction method of creep exponents and coefficients from an indentation creep test by multiaxial stress analysis2020
- Author(s)
  Sakane Masao、Hirano Akihiko、Hamada Naomi、Hoya Yukari、Oka Takahiro、Furukawa Masataka、Itoh Takamoto
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 107 Pages: 102522-102522
- DOI
  10.1016/j.tafmec.2020.102522
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-17K06068
[Journal Article] 押し込みクリープ試験によるクリープ定数同定法の開発2019
- Author(s)
  坂根政男, 平野明彦, 濱田直巳, 穂谷友加里, 岡高廣, 古川正崇, 伊藤隆基
- Journal Title
  
  日本材料学会第57回高温強度シンポジウム前刷り集
  
  Volume: ー Pages: 84-88
- Data Source
  KAKENHI-PROJECT-17K06068
[Journal Article] Effect of multiaxial stress and strain on low cycle fatigue, creep and creep-fatigue lifetimes for type 304 steel cruciform and cubic specimens2018
- Author(s)
  M. Sakane
- Journal Title
  
  Materials Science & Engineering Technology
  
  Volume: 49 Issue: 3 Pages: 301-315
- DOI
  10.1002/mawe.201700206
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06068
[Journal Article] Effect of additional elements on the low-cycle-fatigue characteristics of Sn-1.0Ag-0.7Cu solder obtained using a miniature-sized specimen2018
- Author(s)
  Hideyuki Kanayama, Yutaka Konishi, Fumio Ogawa, Takamoto Itoh, Masao Sakane, Mitsuo Yamashita, Hiroaki Hokazono
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 116 Pages: 180-191
- DOI
  10.1016/j.ijfatigue.2018.06.023
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06068, KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-17K14562
[Journal Article] A synthesis of cracking directions in tension-torsion multiaxial low cycle fatigue at high and room temperatures2018
- Author(s)
  Masao Sakane, Takamoto Itoh
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 98 Pages: 13-22
- DOI
  10.1016/j.tafmec.2018.09.003
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06068, KAKENHI-PROJECT-18K03854
[Journal Article] Crack Propagation Direction of Type 304 Stainless Steel in Torsion Low Cycle Fatigue2017
- Author(s)
  Masahide SAWADA, Kazuya BANNAI, Masao SAKANE
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 66 Issue: 9 Pages: 682-687
- DOI
  10.2472/jsms.66.682
- NAID
  130006083152
- ISSN
  0514-5163, 1880-7488
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06068
[Journal Article] Multiaxial creep damage and lifetime evaluation under biaxial and triaxial stresses for type 304 stainless steel2017
- Author(s)
  Hiroki Kobayashi, Ryohei Ohki, Takamoto Itoh, Masao Sakane
- Journal Title
  
  Engineering Fracture Mechanics
  
  Volume: 174 Pages: 30-43
- DOI
  10.1016/j.engfracmech.2017.01.001
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420028
[Journal Article] 低サイクル疲労およびクリープに及ぼす多軸応力の影響2017
- Author(s)
  坂根政男
- Journal Title
  
  材料
  
  Volume: 66 Pages: 70-79
- NAID
  130005240497
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420028
[Journal Article] Multiaxial Fatigue Property of Ti-6Al-4V using Hollow Cylinder Specimen under Push-pull and Cyclic Inner Pressure Loading Article reference2016
- Author(s)
  akahiro Morishita, Takamoto Itoh, Masao Sakane, Hiroshi Nakamura, Masahiro Takanashi
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 87 Pages: 370-380
- DOI
  10.1016/j.ijfatigue.2016.02.019
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05698
[Journal Article] Creep Characteristic of Sn1.0Ag0.7Cu Lead-Free Solders with Element Addition2016
- Author(s)
  Fumio Ogawa, Hiroki Nagao, Takamoto Itoh, Masao Sakane, Mitsuo Yamashita, Hiroaki Hokazono
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 853 Pages: 192-196
- DOI
  10.4028/www.scientific.net/amm.853.192
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05698
[Journal Article] Development of Bending and Torsion Fatigue Testing Machine for Multiaxial Non-Proportional Loading2016
- Author(s)
  Takahiro Morishita, Takamoto Itoh, Masao Sakane
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 853 Pages: 534-538
- DOI
  10.4028/www.scientific.net/amm.853.534
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05698
[Journal Article] Thermal fatigue life evaluation of substrate with Cu through-hole considering the mechanical properties of Cu thin film and glass fiber cloths structure2015
- Author(s)
  山寄優，釘宮哲也，廣畑賢治，八甫谷明彦，大野信忠，坂根政男
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 81 Issue: 821 Pages: 14-00382-14-00382
- DOI
  10.1299/transjsme.14-00382
- NAID
  130005005008
- ISSN
  2187-9761
- Language
  Japanese
- Data Source
  KAKENHI-PROJECT-26420028
[Journal Article] Effect of multiaxial stress on low cycle fatigue2015
- Author(s)
  Masao Sakane, Takamoto Itoh, Hideyuki Kanayama
- Journal Title
  
  Mechanical Engineering Reviews
  
  Volume: 2 Issue: 1 Pages: 14-00214-14-00214
- DOI
  10.1299/mer.14-00214
- NAID
  130004709951
- ISSN
  2187-9753
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24560092, KAKENHI-PROJECT-26420028
[Journal Article] High temperature nonproportional low cycle fatigue using fifteen loading paths2014
- Author(s)
  Naomi Hamada, Masao Sakane, Takamoto Itoh, Hideyuki Kanayama
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 73 Pages: 136-143
- DOI
  10.1016/j.tafmec.2014.07.006
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24560092
[Journal Article] SUS316FR鋼を用いた環状切欠き材の低サイクル疲労寿命に及ぼす応力波形の影響と簡易寿命推定2014
- Author(s)
  濱田直巳，坂根政男，元家勝彦，梅田洋
- Journal Title
  
  材料
  
  Volume: 63 Pages: 647-654
- NAID
  130004691152
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420028
[Journal Article] 非比例多軸負荷における負荷経路の可視化手法および設計手法の開発2013
- Author(s)
  中村寛, 高梨正祐, 伊藤隆基, 呉敏, 坂根政男
- Journal Title
  
  機械学会論文集（A編）
  
  Volume: 79 Pages: 110-116
- NAID
  130003374596
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560092
[Journal Article] Definition of Stress and Strain Ranges for Multiaxial Fatigue Life Evaluation under Non-Proportional Loading2013
- Author(s)
  伊藤隆基, 坂根政男, 清水祐太
- Journal Title
  
  材料（高温特集号）
  
  Volume: 62 Pages: 117-124
- NAID
  130004481090
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560092
[Journal Article] Multiaxial Low Cycle Fatigue for Ni-Base Single Crystal Super Alloy at High Temperature2013
- Author(s)
  Masao Sakane,Shengde Zhang Akira Yoshinari,Noriaki Matsuda,Nobuhiro Isobe
- Journal Title
  
  Advanced Materials Modeling for Structures
  
  Volume: 19 Pages: 297-305
- DOI
  10.1007/978-3-642-35167-9_27
- ISBN
  9783642351662, 9783642351679
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] ポリイミド系樹脂薄膜の引張特性および粘弾性モデルによる表示2013
- Author(s)
  張聖徳，森秀平，長澤忠，小林馨，坂根政男
- Journal Title
  
  材料
  
  Volume: Vol.62，No.2 Pages: 149-155
- NAID
  130003367132
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Multiaxial Low Cycle Fatigue Life under Non-proportional Loading2013
- Author(s)
  Takamoto Itoh，Masao Sakane，Kazuki Ohsuga
- Journal Title
  
  International Journal of Pressure Vessels and Piping
  
  Volume: Vol.110 Pages: 50-56
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] 非比例多軸負荷における負荷経路の可視化手法および設計手法の開発2013
- Author(s)
  中村寛,高梨正祐,伊藤隆基,呉敏,坂根政男
- Journal Title
  
  日本機械学会論文集A編(材料力学,機械材料など)
  
  Volume: 79,第798号 Pages: 198-208
- NAID
  130003374596
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] 非比例多軸負荷における負荷経路の可視化手法および設計手法の開発2013
- Author(s)
  中村寛,　高梨正祐,　伊藤隆基, 呉敏, 坂根政男
- Journal Title
  
  日本機械学会論文集Ａ編 (材料力学，機械材料など)
  
  Volume: 第79巻第798号 Pages: 198-208
- NAID
  130003374596
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Multiaxial Low Cycle Fatigue Life under Non-proportional Loading2013
- Author(s)
  Takamoto Itoh, Masao Sakane, Kazuki Ohsuga
- Journal Title
  
  International Journal of Pressure Vessels and Piping
  
  Volume: 110 Pages: 50-56
- DOI
  10.1016/j.ijpvp.2013.04.021
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560092
[Journal Article] Ni基単結晶超合金製十字型試験片による軸力-軸力組合せ負荷での多軸低サイクル疲労寿命評価2012
- Author(s)
  松田憲昭,坂根政男,堀智成,能瀬篤志,寄川盛男,増野浩一,磯部展宏,吉成明
- Journal Title
  
  材料
  
  Volume: 61,No.8 Pages: 704-711
- NAID
  130002084915
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Ni基単結晶超合金製十字型試験片による軸力－軸力組合せ負荷での多軸低サイクル疲労寿命評価2012
- Author(s)
  松田憲昭，坂根政男，堀智成，能瀬篤志，寄川盛男，増野浩一，磯部展宏，吉成明
- Journal Title
  
  材料
  
  Volume: Vol.61, No.8 Pages: 704-711
- NAID
  130002084915
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Tensile Properties and Viscoelastic Model of a Polyimide Film2012
- Author(s)
  Shengde ZHANG, Syuhei MORI, Masao SAKANE,　Tadashi NAGASAWA, Kaoru KOBAYASHI
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 6 Issue: 6 Pages: 668-677
- DOI
  10.1299/jmmp.6.668
- NAID
  130002072524
- ISSN
  1880-9871
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Ni基単結晶超合金十字型試験片による高温多軸低サイクル疲労試験法開発2012
- Author(s)
  松田憲昭，坂根政男,大畠裕司,寄川盛男,増野浩一,磯部展宏,吉成明
- Journal Title
  
  材料
  
  Volume: 60 Pages: 1030-1137
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] 多軸応力下における改良9Cr-1Mo鋼切欠き材の低サイクル疲労寿命評価法2011
- Author(s)
  金泰俊,張聖徳,坂根政男
- Journal Title
  
  材料
  
  Volume: 60 Pages: 803-810
- NAID
  130001027827
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Ni基単結晶超合金十字型試験片による高温多軸低サイクル疲労試験法開発2011
- Author(s)
  松田憲昭,坂根政男,大畠裕司,寄川盛男,増野浩一,磯部展宏,吉成明
- Journal Title
  
  材料
  
  Volume: 60,No.12 Pages: 1030-1137
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Notch Effect on Multiaxial Low Cycle Fatigue2011
- Author(s)
  Masao SAKANE, Shengde ZHANG, TeaJoon KIM
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 33 Pages: 959-968
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Notch Effect on Creep-Fatigue Life for Sn-3.5Ag Solder2011
- Author(s)
  Mineo Nozaki, Shengde Zhang, Masao Sakane, Kaoru Kobayashi
- Journal Title
  
  Engineering Fracture Mechanics
  
  Volume: Vo1.78 No.6(5月に出版)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560098
[Journal Article] 多軸応力下でのひずみおよび応力範囲の定義法-比例および非比例負荷-2011
- Author(s)
  伊藤隆基,坂根政男,尾崎智彦
- Journal Title
  
  材料 Vol.60, No.2
  
  Pages: 88-93
- NAID
  130000435070
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Ni基単結晶超合金の多軸応力場における非弾性解析2011
- Author(s)
  鶴来昌樹,松田憲昭,坂根政男,大畠裕司,磯部展宏,吉成明,寄川盛夫,増野浩一
- Journal Title
  
  材料 Vol.60, No.2
  
  Pages: 94-101
- NAID
  130000435071
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Notch Effect on Creep-Fatigue Life for Sn-3.5Ag Solder2011
- Author(s)
  Mineo Nozaki, Shengde Zhang, Masao Sakane, Kaoru Kobayashi
- Journal Title
  
  Engineering Fracture Mechanics Vol.78, No.6
  
  Pages: 1794-1807
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560098
[Journal Article] Notch Effect on Creep-Fatigue Life for Sn-3.5Ag Solder2011
- Author(s)
  Mineo Nozaki, Shengde ZHANG, Masao SAKANE, Kaoru Kobayashi
- Journal Title
  
  Engineering Fracture Mechanics (Special Issue Multiaxial Fracture)
  
  Volume: 78,No.8 Pages: 1794-1807
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Notch Effect on Multiaxial Low Cycle Fatigue2011
- Author(s)
  Masao SAKANE, Shengde ZHANG,TeaJoon KIM
- Journal Title
  
  International Journal of Fatigue ( Special Issue of 'Multiaxial Fatigue Models')
  
  Volume: 33 Pages: 959-968
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560105
[Journal Article] Notch Effect on Multiaxial Low Cycle Fatigue2011
- Author(s)
  坂根政男, 張聖徳, 金泰俊
- Journal Title
  
  International Journal of Fatigue Vol.33, No.8
  
  Pages: 959-968
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] 改良9Cr-1Mo鋼環状切欠き材の非比例多軸低サイクル疲労寿命2010
- Author(s)
  金泰俊,張聖徳,坂根政男
- Journal Title
  
  日本機械学会論文集A編 Vol.76, No.768
  
  Pages: 1059-1067
- NAID
  110007682104
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Creep Rupture Life and Damage Evaluation Under Multiaxial Stress State for Type 304 Stainless Steel2009
- Author(s)
  Shengde Zhang, Takashi Wakai, Masao Sakane
- Journal Title
  
  Materials Science and Engineering A
  
  Pages: 110-114
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Creep Rupture Life and Damage Evaluation Under Multiaxial Stress State for Type 304 Stainless Steel2009
- Author(s)
  Shengde Zhang, Takashi Wakai, Masao Sakane
- Journal Title
  
  Materials Science and Engineering A Vol.510-511
  
  Pages: 110-114
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Ratcheting of Stainless Steel 304 under Multixial Nonproportional Loading2009
- Author(s)
  Kwang Soo, Kim, Rons Jiao, Xu Chen, Masao Sakane
- Journal Title
  
  Trans ASME, Journal of Pressure Vessel Technology 131
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Ni基単結晶超合金の引張・圧縮-繰返しねじり負荷での多軸低サイクル疲労寿命評価2009
- Author(s)
  寄川盛男, 松田憲昭, 坂根政男, 磯部展宏, 鶴来昌樹, 吉成明
- Journal Title
  
  材料 58
  
  Pages: 149-154
- NAID
  130002085548
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Creep-Fatigue life Evaluation for Three kinds of Solders2009
- Author(s)
  Shengde Zhang, Masao Sakane
- Journal Title
  
  3rd International Conference on Integrity, Reliability and Failure (CD)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Ratcheting of Stainless Steel 304 under Multiaxial Nonproportional Loading2009
- Author(s)
  Kwang Soo Kim, Rong Jiao, Xu Chen, Masao Sakane
- Journal Title
  
  Trans.ASME, Journal of Pressure Vessel Technology Vol.131, No.4
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Ni基単結晶超合金の引張・圧縮-繰返しねじり負荷での多軸低サイクル疲労寿命評価2009
- Author(s)
  寄川盛男,松田憲昭,坂根政男,磯部展宏,鶴来昌樹,吉成明
- Journal Title
  
  材料 Vol.58,No.2
  
  Pages: 149-154
- NAID
  130002085548
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Determination of Stress and Strain Ranges and Mean Values Under Multiaxial Loading2009
- Author(s)
  Takamoto Itoh, Masao Sakane, Yuuta Shimizu
- Journal Title
  
  The 12th International Conference of Pressure Vessel Technology(ICPVT-12)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] 電子デバイス用はんだ熱疲労試験装置の開発2009
- Author(s)
  旭吉雅健, 伊藤隆基, 坂根政男
- Journal Title
  
  材料 Vol.58,No.2
- NAID
  130002085550
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Determination of Stress and Strain Ranges and Mean Values Under Multiaxial Loadingl2009
- Author(s)
  Takamoto Itoh, Masao Sakane, Yuuta Shimizu
- Journal Title
  
  The 12th International Conference of Pressure Vessel Technology (ICPVT-12)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Low Cycle Fatigue under Stress Controlled Non-proportional Loading for 1070 Aluminum and 304 Stainless Steel2008
- Author(s)
  Takaei Yamamoto, Takamoto Itoh, Masao Sakane, Naomi Hamada
- Journal Title
  
  Sixth International Conference on Low Cycle Fatigue (LCF6)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Crack Opening Displacement Approach to Assess Multiaxial Low Cycle Fatigue2008
- Author(s)
  Dimitar Tchankov, Masao Sakane, Takamoto Itoh, Naomi Hamada
- Journal Title
  
  International Journal of Fatigue Vol.30,No.3
  
  Pages: 417-425
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Low Cycle Fatigue under Stress Controlled Non-proportional Loading for 1070 Aluminum and 304 Stainless steel2008
- Author(s)
  Takaei Yamamoto, Takamoto Itoh, Masao Sakane, Naomi Hamada
- Journal Title
  
  6th International Conference on Low Cycle Fatigue (CD)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Journal Article] Stress Controlled Multiaxial Low Cycle Fatigue under Proportional and Non-proportional Loading2007
- Author(s)
  Takaei Tamamoto, Takamoto Itoh, Masao Sakane, Naomi Hamda
- Journal Title
  
  Proc. of the 8th International Conference on Multiaxial Fatigue & Fracture CD
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Determination of Stress and Strain Ranges Under Non-proportional Cyclic Loading2007
- Author(s)
  Takamoto Itoh, Tomohiko Ozaki, Toru Amaya, Masao Sakane
- Journal Title
  
  Proc. of the 8th International Conference on Multiaxial Fatigue & Fracture CD
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Design Criteria for Multiaxial Low Cycle Fatigue2007
- Author(s)
  Takamoto Itoh, Masao Sakane
- Journal Title
  
  Integrated Approaches for Materials and Structural Safety Fracture Mechanics and Applications(FM2007)(eds. G. C. Sih, S. T. Tu and Z. D. Wang)
  
  Pages: 21-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] Crack Opening Displacement Approach to Assess Multiaxial Low Cycle Fatigue2007
- Author(s)
  Dimitar Tchankov, Masao Sakane, Takamoto Itoh, Naomi Hamada
- Journal Title
  
  International Journal of Fatigue 30
  
  Pages: 417-425
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560082
[Journal Article] 多軸応力下における改良9Cr-1Mo鋼切欠き材の低サイクル疲労寿命評価法
- Author(s)
  金泰俊,張聖徳,坂根政男
- Journal Title
  
  材料 (掲載決定(2011年発行予定))
- NAID
  130001027827
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560093
[Patent] 金属熱疲労試験機2008
- Inventor(s)
  堀川純, 坂根政男, 伊藤隆基, 旭吉雅憲
- Industrial Property Rights Holder
  堀川純,坂根政男,伊藤隆基,旭吉雅憲
- Acquisition Date
  2008-03-13
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] 高温強度はおもしろい2019
- Author(s)
  坂根政男
- Organizer
  日本機械学会関西支部第94期定時総会・講演会
- Invited
- Data Source
  KAKENHI-PROJECT-17K06068
[Presentation] Creep Void Formation and Rupture Lifetime in Multiaxial Stress States2018
- Author(s)
  Masao Sakane
- Organizer
  2018 International Symposium on Structural Integrity
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06068
[Presentation] Effects of multiaxial stresses on LCF, creep and creep fatigue2017
- Author(s)
  Masao Sakane
- Organizer
  Symposium on Stuructural Durability in Darmstadt(SoSDiD2017)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06068
[Presentation] Low Cycle Fatigue and Creep-fatigue Strength of Lead Free Solders Tested using Small Sized Specimen2017
- Author(s)
  F. Ogawa 1, Y. Konishi 2, T. Itoh 1, N. Hiyoshi 3, M. Sakane
- Organizer
  Eighth International Conference on Low Cycle Fatigue(LCF8)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06068
[Presentation] Material Dependence on Tension-Torsion Multiaxial Low Cycle Fatigue Life at Elevated Temperatures2017
- Author(s)
  Masao Sakane
- Organizer
  Eighth International Conference on Low Cycle Fatigue(LCF8)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06068
[Presentation] Cracking Directions in Multiaxial Low Cycle Fatigue at High and Room Temperatures2017
- Author(s)
  Masao Sakane, Takamoto Itoh
- Organizer
  THE CHALLENGES IN MULTIAXIAL FATIGUE WORKSHOP
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06068
[Presentation] Purity and Grain Size Effects of Creep Characteristics of Pure Aluminum for Electric Devices2016
- Author(s)
  Norihiko Osada, Shogo Yoshitake, Fumio Ogawa, Takamoto Itoh and Masao Sakane
- Organizer
  9 th China-Japan Bilateral Symposium on High Temperature Strength of Materials
- Place of Presentation
  中国・長沙
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Development of Fatigue Testing Machine for Small Sized Specimen in Liquid Conditions2016
- Author(s)
  Taiki Sugimoto, Takamoto Itoh, Masao Sakane, Chiaki Hisaka
- Organizer
  4th International Conference on Small Sample Test Techniques
- Place of Presentation
  中国・上海
- Year and Date
  2016-10-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Biaxial Tensile Creep Damage of Mod.9Cr-1Mo Steel Using Cruciform Specimen2016
- Author(s)
  Ryosuke Itoh, Takumi Hikida, Fumio Ogawa, Takamoto Itoh, Masao Sakane, Shengde Zhang
- Organizer
  9 th China-Japan Bilateral Symposium on High Temperature Strength of Materials
- Place of Presentation
  中国・長沙
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Low Cycle Fatigue and Creep-fatigue Test Technique Used Small Sized Specimen of Lead Free Solders2016
- Author(s)
  Yutaka Konishi, Fumio Ogawa, Takamoto Itoh, Masao Sakane, Hideyuki
- Organizer
  9 th China-Japan Bilateral Symposium on High Temperature Strength of Materials
- Place of Presentation
  中国・長沙
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Biaxial and Triaxial Creep Damage Evaluation for Type 304 Stainless Steel2016
- Author(s)
  HIROKI KOBAYASHI , RYOHEI OHKI , TAKAMOTO ITOH , MASAO SAKANE
- Organizer
  11th International Conference on Multiaxial Fatigue & Fracture (ICMFF11)
- Place of Presentation
  Seville, Spain
- Year and Date
  2016-06-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] Low Cycle Fatigue Test of Lead Free Solders Using Small Sized Specimen2016
- Author(s)
  Yutaka Konishi, Takamoto Itoh, Masao Sakane, Fumio Ogawa, Hideyuki Kanayam
- Organizer
  4th International Conference on Small Sample Test Techniques
- Place of Presentation
  中国・上海
- Year and Date
  2016-10-13
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Development of Miniature Fatigue Testing Machine in Liquid Conditions2016
- Author(s)
  Taiki Sugimoto, Takamoto Itoh, Masao Sakane, Chiaki Hisaka
- Organizer
  9 th China-Japan Bilateral Symposium on High Temperature Strength of Materials
- Place of Presentation
  中国・長沙
- Year and Date
  2016-10-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Biaxial and Triaxial Creep Damage Evaluation for Type 304 Stainless Steel2016
- Author(s)
  Hiroki Kobayashi, Ryohei Ohki, Takamoto Itoh, Masao Sakane
- Organizer
  Internationa Conference on Multiaxial Fatigue & Fractre
- Place of Presentation
  Sevile, Spain
- Year and Date
  2016-06-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05698
[Presentation] Microstructural Study of Multiaxial Low Cycle Fatigue2015
- Author(s)
  M. Sakane, T. Itoh
- Organizer
  First International Workshop on Challenges in Multiaxial Fatigue
- Place of Presentation
  Urbino(Italy)
- Year and Date
  2015-04-23
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] Multiaxial Low Cycle Fatigue of Nickel Base Single Crystal Superalloy2015
- Author(s)
  Masao Sakane
- Organizer
  The Fifth International Symposium on Structural Integrity (ISSI2015),
- Place of Presentation
  Shenyang(China)
- Year and Date
  2015-05-17
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] Low Cycle Fatigue Testing Using Miniature Specimens（Plenary lecture）2015
- Author(s)
  M. Sakane, M. Nozaki, T. Itoh, T. Tsurui
- Organizer
  ESIS TC-10 Workshop ENVIRONMENTALLY ASSISTED CRACKING & HYDROGEN EMBRITTLEMENT
- Place of Presentation
  Zamora,(Spain)
- Year and Date
  2015-04-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] Evaluation and Visualization of Multiaxial Stress and Strain States under Non-proportional Loading2015
- Author(s)
  T. Itoh, T. Morishita, M. Sakane
- Organizer
  First International Workshop on Challenges in Multiaxial Fatigue
- Place of Presentation
  Urbino(Italy)
- Year and Date
  2015-04-22
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] SnAgCu系はんだのクリープ強度に及ぼす添加元素の影響2015
- Author(s)
  長尾裕貴，伊藤隆基，坂根政男，山下満男，外薗洋昭
- Organizer
  日本材料学会第64期学術講演会
- Place of Presentation
  山形大学（山形県米沢市）
- Year and Date
  2015-05-23
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] 高温材料強度の最前線2014
- Author(s)
  坂根政男
- Organizer
  将来加工技術第136委員会　創設50周年記念シンポジウム
- Place of Presentation
  ホテルグランビア京都（京都府）
- Year and Date
  2014-11-28
- Invited
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] ミニチュア試験片を用いたクリープおよび低サイクル疲労試験2014
- Author(s)
  坂根政男
- Organizer
  エネルギーイノベーション材料研究センター第1回シンポジウム
- Place of Presentation
  立命館大学（滋賀県）
- Year and Date
  2014-11-15
- Invited
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] High Temperature Multiaxial Creep-Fatigue Life Prediction for YH61 Nickel-Base Single Crystal Superalloy2014
- Author(s)
  Wenzhu Wang, Masao Sakane, Takamoto Itoh, Akira Yoshinari, Nobuhiro Isobe, Noriaki Matsuda
- Organizer
  11th INTERNATIONAL FATIGUE CONGRESS(FATIGUE 2014)
- Place of Presentation
  Melbourne(Australia)
- Year and Date
  2014-03-03
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Creep and Low Cycle Fatigue Testing Using Miniature Specimens2014
- Author(s)
  Masao Sakane
- Organizer
  2014 International Symposium on Structural Integrity-Structual Integrity Solutions
- Place of Presentation
  Lanzhou（China）
- Year and Date
  2014-08-21
- Invited
- Data Source
  KAKENHI-PROJECT-26420028
[Presentation] Low cycle fatigue of Mod.9Cr-1Mo steel under multiaxial loading at high temperature2013
- Author(s)
  Dan Jin,Wei Wang,Masao Sakane
- Organizer
  The Tenth International Conference on Multiaxial Fatigue & Fracture (ICMFF10)
- Place of Presentation
  立命館大学朱雀キャンパス(京都府)
- Year and Date
  2013-06-04
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Nonproporitional Low Cycle Fatigue for Mod.9Cr-1Mo Steel2013
- Author(s)
  Masao Sakane, Takahiro Katagi
- Organizer
  7th International Conference on Low Cycle Fatigue
- Place of Presentation
  Aachen(Germany)
- Year and Date
  2013-09-09
- Invited
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Evaluation of multiaxial low cycle fatigue life under non-proportional loading2013
- Author(s)
  Takamoto Itoh,Masao Sakane
- Organizer
  The Tenth International Conference on Multiaxial Fatigue & Fracture (ICMFF10)
- Place of Presentation
  立命館大学朱雀キャンパス(京都府)
- Year and Date
  2013-06-05
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Development of Miniature Creep Testing for High Temperature Materials-Development of Testing Machine2012
- Author(s)
  Masao Sakane,Yusuke Kitamura,Takamoto Itoh,Yuichi Irisawa,Takafumi Tsurui,Masaharu Fujiwara,Taejoon Kim
- Organizer
  2nd International Conference SSTT"DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES"
- Place of Presentation
  Ostrava(Czech)
- Year and Date
  2012-10-04
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Development of Miniature Creep Testing for High Temperature Materials-Verification Testing2012
- Author(s)
  Takamoto Itoh,Yuichi Irisawa,Masao Sakane,Yusuke Kitamura,Takafumi Tsurui,Masaharu Fujiwara,Taejoon Kim
- Organizer
  2nd International Conference SSTT"DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES"
- Place of Presentation
  Ostrava(Czech)
- Year and Date
  2012-10-03
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Thermo-Mechanical Fatigue Life Evaluation for Sn-Pb and Sn-Ag Solders2011
- Author(s)
  Noritake HIYOSHI,Takamoto ITOH and Masao SAKANE
- Organizer
  European Microelectronics and Packaging Conference 2011
- Place of Presentation
  Brighton(United Kingdom)
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] 改良9Cr-1Mo鋼の十字型試験片を用いた高温多軸クリープ変形および破断特性2011
- Author(s)
  張聖徳，李経懐，坂根政男
- Organizer
  日本材料学会第49回高温強度シンポジウム
- Place of Presentation
  石垣市商工会館（沖縄県）
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Multiaxial Study of Notched Component of Sn-3.5Ag Solder in Creep-Fatigue2010
- Author(s)
  Mineo Nozaki, Shengde Zhang, Masao Sakane, Kaoru Kobayashi
- Organizer
  The Ninth International Conference on Multiaxial Fatigue & Fracture (ICMFF9)
- Place of Presentation
  パルマ大学(イタリア)
- Year and Date
  2010-06-07
- Data Source
  KAKENHI-PROJECT-20560098
[Presentation] Notch Effect on Multiaxial Low Cycle Fatigue2010
- Author(s)
  Masao Sakane
- Organizer
  9^<th> International Conference on Multiaxial Fatigue & Fracture
- Place of Presentation
  Parma, Italy
- Year and Date
  2010-06-09
- Data Source
  KAKENHI-PROJECT-20560093
[Presentation] Mod.9Cr-1Mo鋼環状切欠き材の非比例多軸低サイクル疲労寿命2009
- Author(s)
  金泰俊, 張聖徳, 坂根政男
- Organizer
  日本材料学会第58期学術講演会講演論文集
- Place of Presentation
  愛媛大学(松山市)
- Data Source
  KAKENHI-PROJECT-20560093
[Presentation] 改良9Cr-1Mo鋼のミニチュア試験片を用いた低サイクル疲労寿命評価法2009
- Author(s)
  野崎峰男、山口篤、鶴井孝文、藤原昌晴、坂根政男
- Organizer
  日本材料学会第58期学術講演会
- Place of Presentation
  愛媛大学
- Year and Date
  2009-05-23
- Data Source
  KAKENHI-PROJECT-20560098
[Presentation] 応力制御下におけるSUS304ステンレス鋼および1070アルミニウムの非比例多軸低サイクル疲労寿命評価2009
- Author(s)
  伊藤隆基, 清水裕太, 山本隆栄, 坂根政男, 濱田直巳
- Organizer
  日本材料学会第58期学術講演会論文集
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] 応力制御下におけるSUS 304ステンレス鋼および1070アルミニウムの非比例多軸低サイクル疲労寿命評価2009
- Author(s)
  伊藤隆基, 清水裕太, 山本隆栄, 坂根政男, 濱田直巳
- Organizer
  日本材料学会第58期学術講演会
- Place of Presentation
  愛媛大学(松山)
- Year and Date
  2009-05-23
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] Low Cycle Fatigue and Creep Testing Using Miniature Specimen2008
- Author(s)
  Masao Sakane
- Organizer
  5th International Conference on Creep, Fatigue and Creep-Fatigue Interaction
- Place of Presentation
  Kalpakkam (India)
- Year and Date
  2008-09-24
- Data Source
  KAKENHI-PROJECT-20560093
[Presentation] はんだ用熱疲労試験装置を用いた電子デバイスはんだの熱疲労寿命評価2008
- Author(s)
  旭吉雅健, 伊藤隆基, 坂根政男
- Organizer
  日本機会学会北陸信越支部第45期総会・講演会
- Place of Presentation
  福井市
- Year and Date
  2008-03-08
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] Ni基単結晶超合金の引張圧縮-繰返しねじり条件下での高温多軸低サイクル疲労寿命評価2008
- Author(s)
  磯部展宏, 寄川盛男, 松田憲昭, 吉成明, 坂根政男
- Organizer
  日本機械学会M&M2008材料力学カンファレンス
- Place of Presentation
  滋賀県草津市(立命館大学)
- Year and Date
  2008-09-16
- Data Source
  KAKENHI-PROJECT-20560093
[Presentation] Sn-8Zn-3Biはんだのクリープ疲労寿命に及ぼす弾性追従の影響2008
- Author(s)
  山本隆栄, 伊藤隆基, 坂根政男
- Organizer
  日本機械学会M&M2008材料力学カンファレンス
- Place of Presentation
  (CD-ROM)
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] Sn-3. 5Agはんだ切欠き材のクリープ疲労寿命評価法2008
- Author(s)
  野崎峰男, 坂根政男, 小林馨
- Organizer
  日本材料学会第46回高温強度シンポジウム
- Place of Presentation
  登別グランドホテル
- Year and Date
  2008-12-08
- Data Source
  KAKENHI-PROJECT-20560098
[Presentation] 応力制御下における1070アルミニウムおよびSUS304ステンレス鋼の多軸低サイクル疲労寿命2008
- Author(s)
  橋本龍太, 山本隆栄, 伊藤隆基, 坂根政男, 濱田直巳
- Organizer
  日本機械学会M&M2008材料力学カンファレンス
- Place of Presentation
  (CD-ROM)
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] Sn-3.5Agはんだ切欠き材のクリープ疲労寿命評価法2008
- Author(s)
  野崎峰男、坂根政男、小林馨
- Organizer
  日本材料学会第46回高温強度シンポジウム
- Place of Presentation
  登別グランドホテル
- Year and Date
  2008-12-04
- Data Source
  KAKENHI-PROJECT-20560098
[Presentation] Sn-3.5Agはんだの熱疲労寿命評価」,日本材料学会第56期学術講演会講演論文集2007
- Author(s)
  旭吉雅健, 坂根政男, 伊藤隆基
- Organizer
  日本材料学会第56期学術講演会講演
- Place of Presentation
  名古屋市
- Year and Date
  2007-05-20
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] Sn-37PbおよびSn-3.5Agはんだの熱疲労寿命2007
- Author(s)
  旭吉雅健, 伊藤隆基, 坂根政男
- Organizer
  日本材料学会第45回高温強度シンポジウム
- Place of Presentation
  東京
- Year and Date
  2007-12-06
- Data Source
  KAKENHI-PROJECT-19560082
[Presentation] Effect of Addictive Elements on Tensile, Creep and Low Cycle Fatigue Strength for SnBi Solders
- Author(s)
  Sho NAKANO, Masao SAKANE, Hiroaki HOKAZONO, Mitsuo YAMASHITA
- Organizer
  The 14th International Conference on Electronic Materials and Packaging(EMAP2012)
- Place of Presentation
  Lantau Island, Hong Kong
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Lowcycle fatigue of Mod.9Cr-1Mo steel under multiaxial loading at high temperature
- Author(s)
  Dan Jin，Wei Wang，Masao Sakane
- Organizer
  The Tenth International Conference on Multiaxial Fatigue & Fracture (ICMFF10)
- Place of Presentation
  立命館大学（京都府）
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] 非比例多軸負荷における疲労強度評価のための解析ツールの開発
- Author(s)
  森下高弘, 伊藤隆基, 劉淑莉, 坂根政男
- Organizer
  日本材料学会第63期講演会
- Place of Presentation
  福岡大学（福岡県・福岡市）
- Year and Date
  2014-05-17 – 2014-05-18
- Data Source
  KAKENHI-PROJECT-24560092
[Presentation] Nonproporitional Low Cycle Fatigue for Mod.9Cr-1Mo Steel
- Author(s)
  Masao Sakane，Takahiro Katagi
- Organizer
  7th International Conference on Low Cycle Fatigue
- Place of Presentation
  Aachen，Germany
- Invited
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] 4種類の電子デバイス用樹脂薄膜のクリープ強度比較
- Author(s)
  藤岡健太，金山英幸，坂根政男，小林馨
- Organizer
  第50回記念高温強度シンポジウム
- Place of Presentation
  ハートピア京都，京都府
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Evaluation of multiaxial low cycle fatigue life under non-proportional loading
- Author(s)
  Takamoto Itoh，Masao Sakane
- Organizer
  The Tenth International Conference on Multiaxial Fatigue & Fracture (ICMFF10)
- Place of Presentation
  立命館大学（京都府）
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Thermo-Mechanical Fatigue Life of Solder Alloys
- Author(s)
  Noritake Hiyoshi，Takamoto Itoh，Masao Sakane
- Organizer
  7th International Conference on Low Cycle Fatigue
- Place of Presentation
  Aachen，Germany
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] High Temperature Multiaxial Creep-Fatigue Life Prediction for YH61 Nickel-Base Single Crystal Superalloy
- Author(s)
  Wenzhu Wang, Masao Sakane, Takamoto Itoh, Akira Yoshinari, Nobuhiro Isobe,
- Organizer
  11th INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2014)
- Place of Presentation
  Melbourne, Australia
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] 低サイクル疲労およびクリープに及ぼす多軸応力の影響
- Author(s)
  坂根政男
- Organizer
  第50回記念高温強度シンポジウム
- Place of Presentation
  ハートピア京都，京都府
- Invited
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Sn-Bi系鉛フリーはんだのクリープ変形および破断特性
- Author(s)
  中野翔，張聖徳，坂根政男，外薗洋昭，山下満男
- Organizer
  日本材料学会第61期学術講演会
- Place of Presentation
  岡山大学津島キャンパス，岡山県
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] 改良9Cr-1Mo鋼平滑材の非比例多軸低サイクル疲労寿命評価
- Author(s)
  片木貴大，張聖徳，坂根政男
- Organizer
  日本材料学会第61期学術講演会
- Place of Presentation
  岡山大学津島キャンパス，岡山県
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Low Cycle Fatigue Crack Initiation and Propagation Behavior of Copper Thin Films Used in Electronic Devices
- Author(s)
  Tasuku Kambayashi, Masao Sakane and Kenji Hirohata
- Organizer
  IEEE CPMT Symposium Japan 2012
- Place of Presentation
  みやこめっせ，京都府
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Development of Miniature Creep Testing for High Temperature Materials-Development of Testing Machine
- Author(s)
  Masao Sakane, Yusuke Kitamura, Takamoto Itoh, Yuichi Irisawa, Takafumi Tsurui, Masaharu Fujiwara, Taejoon Kim
- Organizer
  2nd International Conference SSTT “DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES"
- Place of Presentation
  Ostrava, Czech
- Data Source
  KAKENHI-PROJECT-23560105
[Presentation] Evaluation of Multiaxial Low Cycle Fatigue Life under Non-proportional Loading
- Author(s)
  Takamoto Itoh, Masao Sakane
- Organizer
  10th Int. Conf. On Multiaxial Fatigue & Fracture
- Place of Presentation
  立命館大学（京都府）
- Invited
- Data Source
  KAKENHI-PROJECT-24560092
[Presentation] Development of Miniature Creep Testing for High Temperature Materials-Verification Testing
- Author(s)
  Takamoto Itoh, Yuichi Irisawa, Masao Sakane, Yusuke Kitamura,
- Organizer
  2nd International Conference SSTT “DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES"
- Place of Presentation
  Ostrava, Czech
- Data Source
  KAKENHI-PROJECT-23560105

1. OHNAMI Masateru (60066587)

# of Collaborated Projects: 11 results

# of Collaborated Products: 0 results
2. ITOH Takamoto (40242581)

# of Collaborated Projects: 6 results

# of Collaborated Products: 44 results
3. KUSAKA Takayuki (10309099)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. ZAHNG Shengde (00454520)

# of Collaborated Projects: 3 results

# of Collaborated Products: 19 results
5. AMEYAMA Kei (10184243)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. YAMAMOTO Takaei (20295166)

# of Collaborated Projects: 3 results

# of Collaborated Products: 5 results
7. TAKADA Akio (80043363)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. HIYOSHI Noritake (30342489)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. OKAZAKI Masakazu (00134974)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. YOSHIDA Toshihiro

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. FUJIYAMA Kazunari

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. YOSHINARI Akira (90505645)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
13. NOZAKI Mineo (10470238)

# of Collaborated Projects: 1 results

# of Collaborated Products: 6 results
14. TORIYAMA Toshiyuki (30227681)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. FUJIWARA Hiroshi (80320117)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. NOMURA Yasutoshi (20372667)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. KAKEI Koji (70185726)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. KITAMURA Takayuki (20169882)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. YAMADA Yasuhiro (70291755)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. TADA Yaoya (70243053)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. MIYANO Naoki (40363353)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. INOUE Tatsuo (10025950)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. OHNO Nobutada (30115539)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. 高木宣章 (50154753)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. 元家勝彦 (10069198)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. 村上澄男 (10023053)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. 小川文男 (00424812)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. KITAGAWA Masaki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. KAWAI Sueo

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. KOMURA Ichiro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. IGARI Toshihide

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. FUJII Tsutomu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. MOTOIE Katsuhiko

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. 鈴木章彦

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. SUZUKI Akihiko

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. 大浜信一

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. OHAMA Shinich

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SAKANE Masako 坂根 政男

SAKANE Masao 坂根 政男

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

An analytical and experimental research for extracting creep exponents and coefficients from indentation creep tests.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Design Method for Advanced Ni-base Single Crystal Superalloy Blades in Gas TurbinesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Creep-Fatigue Life Estimation for Nickel Base Single Crystal Superalloy under Multiaxial LoadingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Multiaxial Creep-Fatigue Life Evaluation for Nickel-Base Single Crystal Superalloy Using Cruciform SpecimenPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

SAKANE Masako 坂根政男

SAKANE Masao 坂根政男