MAKI Seijiro 牧清二郎

Researcher Number	20124315
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2012 – 2014: 三重大学, 工学(系)研究科(研究院), 教授 2007 – 2011: Mie University, 大学院・工学研究科, 教授 2006: Mie University, Faculty of Engineering, Professor, 工学部, 教授 2001 – 2005: 豊橋技術科学大学, 工学部, 助教授 2002: 豊橋技術科学大学, 工学部, 教授 … More 1998 – 1999: 豊橋技術科学大学, 工学部, 助教授 1988 – 1989: 豊橋技術科学大学, 工学部, 助教授 1986 – 1987: 豊橋技術科学大学, 工学部, 講師 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 金属加工(含鋳造) / Material processing/treatments / Material processing/treatments Except Principal Investigator Material processing/treatments / Material processing/treatments / Materials/Mechanics of materials / 溶接工学
Keywords	Principal Investigator 焼入れ / 通電加熱 / アルミニウム合金 / 抵抗加熱 / 半溶融鍛造 / Friction coefficient / Friction / Adhesion / Sliding / Plastic deformation … More / Dissimilar metal / Cold pressure welding / Joining / 冷間接合 / 摩擦係数 / 摩擦 / 凝着 / すべり / 塑性変形 / 異種金属 / 冷間圧接 / 接合 / Aluminum alloys / Resistance heating / Mushy-state forging / Semi-solid processing / 温度解析 / 半溶融加工 / metal powder / shear deformation / extrusion / powder consolidation / 押出し / せん断変形 / 粉末固化 / 金属粉末 / 火炎焼入れ鋼 / ダイス鋼 / 金型 / 局所焼入れ / 熱処理 / 硬さ / 塑性加工 / プレス成形 / 熱間成形 / 曲げ試験 / 引張試験 / 高張力鋼板 / ダイクエンチ / 熱間プレス成形 / 示差熱分析 / 液相率制御 … More Except Principal Investigator cold forming / long cup / seizure / multi-stage deep drawing / 冷間加工 / 極深容器 / 焼付き / 多段深絞り加工 / 塑性変形 / Thermal Shock Resistant Properties / Coating Configuration / Graded Coating / Cermet Coating / Through Porosity / Low Proessure Plasma Spraying / Specific Erosion Rate / Erosion Resistant Properties / Ceramics Sprayed Coating / Surface Treatment / 土砂摩耗 / 減圧プラズマジェット溶射 / サーメット / セラミックス / 皮膜強化世処理 / サーメット漸変溶射皮膜 / セラミックス皮膜 / プラズマ溶射 / 溶射皮膜 / 皮膜強化熱処理 / 熱衝撃特性 / 皮膜積層形態 / 漸変溶射皮膜 / サーメット皮膜 / 貫通気孔率 / 減圧プラズマ溶射 / 比摩耗速度 / 土砂摩耗特性 / セラミックス溶射皮膜 / 表面処理 / warm and hot shearing / die quenching / springback / press forming / warm and hot forming / heating of sheet set into die / resistance heating / ultra high tensile strength steel sheet / 温・熱間せん断加工 / ダイクエンチ / スプリングバック / プレス成形 / 温・熱間成形 / 型内加熱 / 通電加熱 / 超高張力鋼板 / solution heat treatment / oxide coating / titanium alloy sheet / 焼鈍し処理 / 溶体化熱処理 / 酸化被膜処理 / チタン合金板 / ceramic / cemented carbide / plastic deformation / wear resistance / surface treatment / manesium alloy / bonding / shot peening / 金属薄板 / セラミック / 硬質材料 / 耐摩耗性 / 表面改質 / マグネシウム合金 / 接合 / ショットピーニング / grain growth / diffusion / coupled method / viscoplastic finite element method / Monte Carlo method / sintering / micro-macro method / 粒成長 / 拡散 / 連成解析 / 粘塑性有限要素法 / モンテカルロ法 / 焼結 / マイクロ-マクロ解析法 / coating treatment / colored titanium sheet / pure titanium sheet / 皮膜処理 / カラーチタン板 / 純チタン板 / Porous Metal / Finite Element Method / Plastic Deformation / Powder Particle / Powder compaction / Particle Method / 多孔質体 / 有限要素法 / 粉末粒子 / 粉末成形 / 粒子系解析法 Less

Development research on realization of a method of local hardening of steel die using rapid resistance heatingPrincipal Investigator
- Principal Investigator
  
  MAKI Seijiro
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Mie University
Clearing-up of metallurgical points topay attention toonapplication of rapid resistance heating to hot-stamping process combined with press-quenchingPrincipal Investigator
- Principal Investigator
  
  MAKI Seijiro
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Mie University
Establishment of Accurate Liquid Phase Fraction Control Method for Extensive Application of Aluminum Alloys to Semisolid Forging Using Resistance HeatingPrincipal Investigator
- Principal Investigator
  
  MAKI Seijiro
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Mie University
Development of Warm and Hot Press Forming of Ultra High Strength Steel Sheets Using Resistance Heating
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Research of Multi-Stage Cold Deep Drawing Technique of Titanium Alloy Sheets
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Development of Mushy-state Forging Method Using Resistance HeatingPrincipal Investigator
- Principal Investigator
  
  MAKI Seijiro
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Toyohashi University of Technology
Research of Multi-Stage Cold Deep Drawing Technique of Long Pure Titanium Cups
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Micro-Macro Simulation Method for Sintering Process and Control of Microstructure
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Toyohashi University of Technology
Research into Shear Deformation-added Extrusion of Metal-based Powder Using Separated Rotary ContainerPrincipal Investigator
- Principal Investigator
  
  MAKI Seijiro
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Shot Lining of Light Metals with Hard Powder
- Principal Investigator
  
  HARADA Yasunori
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Himeji Institute of Technology
  Toyohashi University of Technology
Microscopic Approach of Plastic Deformation of Particles and Coupled Analysis with Macroscopic Approach
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Toyohashi University of Technology
A Study of Frictional Adhesion between Dissimilar Metals with a Background of Development of Cold Pressure Welding Using Interfacial SlidePrincipal Investigator
- Principal Investigator
  
  MAKI Seijiro
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Toyohashi University of Technology
Fundamental research on graded cermet sprayed coatings.
- Principal Investigator
  
  OKANE Isao
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  溶接工学
- Research Institution
  Toyohashi University of Technology

All 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 Other

All Journal Article Presentation

[Journal Article] 急速通電加熱を利用したエッジ部の局所焼入れの加熱状態の焼入れ状態への影響2015
- Author(s)
  大野正稀，牧清二郎，中西栄徳
- Journal Title
  
  日本機械学会東海支部第64期総会講演会　講演論文集　No.153-1 (USB Flash)
  
  Volume: 153-1 Pages: 175-175
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] Electrification Control for Stable Achievement of Local Hardening of Steel Using Rapid Resistance Heating2014
- Author(s)
  Seijiro Maki, Yuuki Makida, Eitoku Nakanishi
- Journal Title
  
  Proceedings of the 17th International Conference on Advances in Materials & Processing Technologies (CD-ROM)
  
  Volume: - Pages: 141-141
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] 急速通電加熱を利用したエッジ部の局所焼入れ（加熱状態と硬化領域の関係）2014
- Author(s)
  大野正稀，牧清二郎，中西栄徳
- Journal Title
  
  第10回生産加工・工作機械部門講演会　論文集 (USB Flash)
  
  Volume: - Pages: 263-264
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] 急速通電加熱を利用した局所焼入れ安定化のための通電制御2013
- Author(s)
  牧清二郎，牧田祐樹，中西栄徳
- Journal Title
  
  日本機械学会第21回機械材料・材料加工技術講演会（M&P2013）講演論文集
  
  Volume: No.13-31
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] 局所通電焼入れ連続処理におけるSKD11の硬化特性2012
- Author(s)
  大石晃平，牧清二郎，中西栄徳
- Journal Title
  
  日本機械学会東海支部第62期総会講演会講演論文集
  
  Volume: No.133-1 Pages: 347-348
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] Local Hardening of Flame Hardening Steel Using Rapid Resistance Heating2012
- Author(s)
  Seijiro Maki, Shinpei Matsuda, Eitoku Nakanishi
- Journal Title
  
  Proceedings of the 15th International Conference on Advances in Materials & Processing Technologies
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] 急速通電加熱を用いたダイス鋼の局所焼入れにおける通電条件の焼入れ状態に及ぼす影響2012
- Author(s)
  牧清二郎，大石晃平，中西栄徳
- Journal Title
  
  日本機械学会第20回機械材料・材料加工技術講演会（M&P2012）講演論文集
  
  Volume: No.12-9
- NAID
  40020114270
- Data Source
  KAKENHI-PROJECT-24560877
[Journal Article] Punching Test of High Strength Steel Sheet in Rapid Cooling Stage Following Austenitizing by Rapid Resistance Heating2011
- Author(s)
  Seijiro Maki, Takashi Hattori, Eitoku Nakanishi
- Journal Title
  
  steel research international
  
  Pages: 554-558
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] 実用鋼板の通電加熱円弧曲げ・ダイクエンチにおける成形状態におよぼす解放温度の影響2011
- Author(s)
  牧清二郎, 楠吉浩, 中西栄徳
- Journal Title
  
  第62回塑性加工連合講演会講演論文集
  
  Pages: 273-274
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] 実用鋼板における通電加熱ダイクエンチ後の機械的特性におよぼす処理条件の影響2011
- Author(s)
  中谷広樹, 牧清二郎, 中西栄徳
- Journal Title
  
  第62回塑性加工連合講演会講演論文集
  
  Pages: 271-272
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] 実用鋼板の通電加熱ダイクエンチにおける処理後の性状におよぼす処理条件の影響2011
- Author(s)
  牧清二郎, 中谷広樹, 中西栄徳
- Journal Title
  
  平成23年度塑性加工春季講演会講演論文集
  
  Pages: 349-350
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] Hardness Property of Resistance-Heated and Rapidly Cooled Steel Sheet for Die-Quenching Use2011
- Author(s)
  Seijiro Maki
- Journal Title
  
  AIP Conference Proceedings
  
  Volume: 1315 Pages: 309-314
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] 通電加熱ダイクエンチ後の硬さにおよぼす処理条件の影響2010
- Author(s)
  牧清二朗
- Journal Title
  
  平成22年度塑性加工春季講演会講演論文集
  
  Pages: 23-24
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] 通電加熱ダイクエンチ後の硬さにおよぼす処理条件の影響2010
- Author(s)
  牧清二郎
- Journal Title
  
  第61回塑性加工春季講演会講演論文集
  
  Pages: 23-24
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] 実用鋼板の通電加熱ダイクエンチにおける加熱温度の硬さへの影響2010
- Author(s)
  牧清二郎, 中谷広樹, 中西栄徳
- Journal Title
  
  第61回塑性加工連合講演会講演論文集
  
  Pages: 385-386
- Data Source
  KAKENHI-PROJECT-21560120
[Journal Article] アルミニウム合金半溶融鍛造のための液相率と温度の関係の簡易測定2009
- Author(s)
  牧清二郎
- Journal Title
  
  平成21年度塑性加工春季講演会講演論文集
  
  Pages: 163-164
- Data Source
  KAKENHI-PROJECT-19560112
[Journal Article] アルミニウム合金の抵抗加熱半溶融鍛造における液相率の制御2008
- Author(s)
  牧清二郎, 江口健太, 中西栄徳
- Journal Title
  
  平成20年度塑性加工春季講演会講演論文集
  
  Pages: 9-10
- Data Source
  KAKENHI-PROJECT-19560112
[Journal Article] Die Quenching of Ultrahigh-Strength Steel Sheet Using Resistance Heating2007
- Author(s)
  S.Maki, A.Hamamoto, S.Saito, K.Mori
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity 48-553
  
  Pages: 140-144
- NAID
  10018291814
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] 抵抗加熱を利用した超高張力鋼板のダイクエンチ2007
- Author(s)
  牧清二郎, 濱本篤, 斉藤翔一, 森謙一郎
- Journal Title
  
  塑性と加工 48・553
  
  Pages: 140-144
- NAID
  10018291814
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] 超高張力鋼板の熱問プレス成形における酸化防止2007
- Author(s)
  森謙一郎, 牧清二郎, 斉藤翔一, 岸本信, 林達志, 奥村俊彦
- Journal Title
  
  塑性と加工 48・555
  
  Pages: 318-322
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Hot Stamping and Press Quenching of Ultrahigh Strength Steel Sheet Using Resistance Heating2007
- Author(s)
  S.Maki, A.Hamamoto, S.Saito, K.Mori
- Journal Title
  
  Key Engineering Materials 344
  
  Pages: 309-316
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Hot stamping and press quenching of ultrahigh strength steel sheet using resistance heating2007
- Author(s)
  S.Maki, A.Hamamoto, S.Saito, K.Mori
- Journal Title
  
  Key Engineering Materials 344
  
  Pages: 309-316
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Prevention of Oxidation in Hot Stamping of Ultra High Strength Steel Sheets2007
- Author(s)
  K.Mori, S.Maki, S.Saito, M.Kishimoto, T.Hayashi, T.Okumura
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity 48-555
  
  Pages: 318-322
- NAID
  10018418033
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Resistance Heating Characteristics of High-Strength Steel Sheet Blank for Hot Press Forming2007
- Author(s)
  S.Maki, Y.Tanaka, K.Mori
- Journal Title
  
  Key Engineering Materials 340-341
  
  Pages: 749-754
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Resistance heating characteristics of high-strength steel sheet blank for hot press forming2007
- Author(s)
  S.Maki, Y.Tanaka, K.Mori
- Journal Title
  
  Key Engineering Materials 340-341
  
  Pages: 749-754
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] 超高張力鋼板の熱間プレス成形における酸化防止2007
- Author(s)
  森謙一郎, 牧清二郎, 斉藤翔一, 岸本信, 林達志, 奥村俊彦
- Journal Title
  
  塑性と加工 48・555
  
  Pages: 318-322
- NAID
  10018418033
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] 通電加熱を用いた超高張力鋼板のダイクエンチ2006
- Author(s)
  森謙一郎, 牧清二郎
- Journal Title
  
  日本鉄鋼協会第151回春季講演大会講演論文集 19・2
  
  Pages: 378-378
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Application of Resistance Heating Technique to Hot Stamping of High-Strength Steel Sheet2006
- Author(s)
  S.Maki, Y.Tanaka, K.Mori
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity 47-544
  
  Pages: 394-398
- NAID
  10016807555
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] 高張力鋼板熱間プレス成形への抵抗加熱の応用2006
- Author(s)
  牧清二郎, 田中祐樹, 森謙一郎
- Journal Title
  
  塑性と加工 47・544
  
  Pages: 394-398
- NAID
  10016807555
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Research of Favorable Electric Resistance Heating Condition for Aluminum Alloy Billet in MashyState Forging2005
- Author(s)
  S.Maki, H.Shibata, K.Mori, H.Makino
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity(in Japanese) (in press)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Influence of input heat on microstructure in mushy state forging of A357 aluminum alloy using resistance heating2005
- Author(s)
  Seijiro Maki, Hiroomi Shibata, Ken-ichiro Mori, Hiroyasu Makino
- Journal Title
  
  Advanced Technology of Plasticity 2005, Proceedings of the 8th International Conference of Technology of Plasticity (contributed)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] 半溶融鍛造のためのアルミニウム合金ビレットの安定した均一抵抗加熱策2005
- Author(s)
  牧清二郎, 柴田浩臣, 森謙一郎, 牧野泰育
- Journal Title
  
  塑性と加工 46(印刷中)
- NAID
  10016122107
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] 通電加熱を用いた高強度鋼板の温・熱間ハット曲げ2005
- Author(s)
  森謙一郎, 牧清二郎
- Journal Title
  
  日本鉄鋼協会第150回秋季講演大会講演論文集 18・5
  
  Pages: 1254-1254
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] プレコート防錆剤を用いた超高張力鋼板の熱間プレス成形2005
- Author(s)
  岸本信, 牧清二郎, 斉藤翔一, 森謙一郎, 林達志, 奥村俊彦
- Journal Title
  
  第56回塑性加工連合講演会講演論文集
  
  Pages: 385-386
- Data Source
  KAKENHI-PROJECT-17360352
[Journal Article] Mushy state forging of aluminum alloy using resistance heating2004
- Author(s)
  Seijiro Maki, Takeshi Shibata, Ken-ichiro Mori, Hiroyasu Makino
- Journal Title
  
  STEEL-GRIPS, Metal Forming 2004 2(Suppl.)
  
  Pages: 711-716
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] アルミニウム合金半溶融鍛造への抵抗加熱の応用2004
- Author(s)
  牧清二郎, 柴田剛志, 森謙一郎, 原田泰典, 牧野泰育
- Journal Title
  
  塑性と加工 45
  
  Pages: 535-539
- NAID
  10012792266
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Mushy state forging of aluminum alloy using resistance heating2004
- Author(s)
  Seijiro Maki, Takeshi Shibata, Ken-ichiro Mori, Hiroyasu Makino
- Journal Title
  
  STEEL-GRIPS, Suppl.Metal Forming 2004 2
  
  Pages: 711-716
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Mushy state forging of aluminum alloy using resistance heating2004
- Author(s)
  Seijiro Maki, Takeshi Shibata, Ken-ichiro Mori, Hiroyasu Makino
- Journal Title
  
  STEEL-GRIPS, Suppl.Metal Forming 2
  
  Pages: 711-716
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] 抵抗加熱半溶融鍛造におよぼす通電時面圧の影響2004
- Author(s)
  牧清二郎, 柴田浩臣, 森謙一郎, 牧野泰育
- Journal Title
  
  平成16年度塑性加工春季講演会講演論文集
  
  Pages: 209-210
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Influence of Applied Pressure in Resistance Heating on Mashy-State Forging Billet2004
- Author(s)
  S.Maki, H.Shibata, K.Mori, H.Makino
- Journal Title
  
  The Proceedings of the 2004 Japanese Spring Conference for the Technology of Plasticity(in Japanese)
  
  Pages: 209-210
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Application of Resistance Heating Technique to Mashy-State Forging of Aluminum Alloy2004
- Author(s)
  S.Maki, T.Shibata, K.Mori, Y.Harada, H.Makino
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity(in Japanese) 45-522
  
  Pages: 535-539
- NAID
  10012792266
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Microstructure of Aluminum Alloy A357 Mushy-State-Forged under Resistance Heating2003
- Author(s)
  S.Maki, T.Shibata, K.Mori, Y.Harada, H.Makino
- Journal Title
  
  The Proceedings of the 2003 Japanese Spring Conference for the Technology of Plasticity(in Japanese)
  
  Pages: 251-252
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] 半溶融鍛造用A357ビレットの抵抗加熱における電気接触性状の影響2003
- Author(s)
  牧清二郎, 柴田浩臣, 森謙一郎, 原田泰典, 牧野泰育
- Journal Title
  
  第54回塑性加工連合講演会講演論文集
  
  Pages: 295-296
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] Influence of Electric Contact Condition on Resistance Heating of A357 Mushy-State Forging Billet2003
- Author(s)
  S.Maki, H.Shibata, K.Mori, Y.Harada, H.Makino
- Journal Title
  
  The Proceedings of the 54th Japanese Joint Conference for the Technology of Plasticity(in Japanese)
  
  Pages: 251-252
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Journal Article] アルミニウム合金A357の抵抗加熱半溶融鍛造組織2003
- Author(s)
  牧清二郎, 柴田剛志, 森謙一郎, 原田泰典, 牧野泰育
- Journal Title
  
  平成15年度塑性加工春季講演会講演論文集
  
  Pages: 251-252
- NAID
  10018291759
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560093
[Presentation] 急速通電加熱を利用した局所焼入れ安定化のための通電制御2013
- Author(s)
  牧田祐樹
- Organizer
  日本機械学会第21回機械材料・材料加工技術講演会（M&P2013）
- Place of Presentation
  首都大学東京南大沢キャンパス（東京都）
- Data Source
  KAKENHI-PROJECT-24560877
[Presentation] Local Hardening of Flame Hardening Steel Using Rapid Resistance Heating2012
- Author(s)
  Seijiro Maki
- Organizer
  15th International Conference on Advances in Materials & Processing Technologies (AMPT2012)
- Place of Presentation
  Novotel Wollongong North Beach Hotel, Wollongong (Australia)
- Invited
- Data Source
  KAKENHI-PROJECT-24560877
[Presentation] Punching Test of High Strength Steel Sheet in Rapid Cooling Stage Following Austenitizing by Rapid Resistance Heating2011
- Author(s)
  Seijiro Maki, Takashi Hattori, Eitoku Nakanishi
- Organizer
  10th International Conference on Technology of Plasticity, ICTP 2011
- Place of Presentation
  Aachen, Germany
- Year and Date
  2011-09-28
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] Punching Test of High Strength Steel Sheet in Rapid Cooling Stage Following Austenitizing by Rapid Resistance Heating2011
- Author(s)
  Seijiro Maki, Takashi Hattori, EitokuNakanishi
- Organizer
  10th International Conference on Technology of Plasticity
- Place of Presentation
  Aachen, Germany
- Year and Date
  2011-09-28
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] 実用鋼板の通電加熱ダイクエンチにおける処理後の性状におよぼす処理条件の影響2011
- Author(s)
  牧清二郎,中谷広樹,中西栄徳
- Organizer
  日本塑性加工学会
- Place of Presentation
  早稲田大学西早稲田キャンパス
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] 実用鋼板における通電加熱ダイクエンチ後の機械的特性におよぼす処理条件の影響2011
- Author(s)
  中谷広樹,牧清二郎,中西栄徳
- Organizer
  日本塑性加工学会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-10-27
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] 実用鋼板の通電加熱円弧曲げ・ダイクエンチにおける成形状態におよぼす解放温度の影響2011
- Author(s)
  牧清二郎,楠吉浩,中西栄徳
- Organizer
  日本塑性加工学会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-10-27
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] Hardness Property of Resistance-Heated and Rapidly Cooled Steel Sheet for Die-Quenching Use2010
- Author(s)
  Seijiro Maki
- Organizer
  International Conference on Advances in Materials and Processing Technologies
- Place of Presentation
  Paris, France
- Year and Date
  2010-10-27
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] 通電加熱ダイクエンチ後の硬さにおよぼす処理条件の影響2010
- Author(s)
  牧清二郎
- Organizer
  日本塑性加工学会
- Place of Presentation
  電気通信大学情報理工学部
- Year and Date
  2010-05-28
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] 実用鋼板の通電加熱ダイクエンチにおける加熱温度の硬さへの影響2010
- Author(s)
  牧清二郎,中谷広樹,中西栄徳
- Organizer
  日本塑性加工学会
- Place of Presentation
  山形大学工学部米沢キャンパス
- Year and Date
  2010-10-16
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] Hardness Property of Resistance-Heated and Rapidly Cooled Steel Sheet for Die-Quenching Use2010
- Author(s)
  Seijiro Maki
- Organizer
  International Conference on Advances in Materials and Processing Technologies (AMPT2010)
- Place of Presentation
  Paris, France
- Year and Date
  2010-10-27
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] 通電加熱ダイクエンチ後の硬さにおよぼす処理条件の影響2010
- Author(s)
  牧清二郎
- Organizer
  日本塑性加工学会,日本機械学会
- Place of Presentation
  電気通信大学情報理工学部
- Year and Date
  2010-05-28
- Data Source
  KAKENHI-PROJECT-21560120
[Presentation] アルミニウム合金半溶融鍛造のための液相率と温度の関係の簡易測定2009
- Author(s)
  牧清二郎
- Organizer
  平成21年度塑性加工春季講演会
- Place of Presentation
  京都大学
- Data Source
  KAKENHI-PROJECT-19560112
[Presentation] アルミニウム合金の抵抗加熱半溶融鍛造における液相率の制御2008
- Author(s)
  牧清二郎, 江口健太, 中西栄徳
- Organizer
  平成20年度塑性加工春季講演会
- Place of Presentation
  日本大学生産工学部(津田沼キャンパス)
- Data Source
  KAKENHI-PROJECT-19560112
[Presentation] アルミニウム合金の抵抗加熱半溶融鍛造における液相率の制御2008
- Author(s)
  牧清二郎, 江口健太, 中西栄徳
- Organizer
  日本塑性加工学会
- Place of Presentation
  日本大学生産工学部(津田沼キャンパス)
- Year and Date
  2008-05-23
- Data Source
  KAKENHI-PROJECT-19560112
[Presentation] 急速通電加熱を利用したエッジ部の局所焼入れの加熱状態の焼入れ状態への影響
- Author(s)
  大野正稀，牧清二郎，中西栄徳
- Organizer
  日本機械学会東海支部
- Place of Presentation
  中部大学　春日井キャンパス、愛知県春日井市
- Year and Date
  2015-03-13 – 2015-03-14
- Data Source
  KAKENHI-PROJECT-24560877
[Presentation] Electrification Control for Stable Achievement of Local Hardening of Steel Using Rapid Resistance Heating
- Author(s)
  Seijiro Maki, Yuuki Makida, Eitoku Nakanishi
- Organizer
  17th International Conference on Advances in Materials & Processing Technologies, AMPT2014
- Place of Presentation
  Atlantis The Palm, Dubai, United Arab Emirates
- Year and Date
  2014-11-16 – 2014-11-20
- Data Source
  KAKENHI-PROJECT-24560877
[Presentation] 急速通電加熱を利用したエッジ部の局所焼入れ（加熱状態と硬化領域の関係）
- Author(s)
  大野正稀，牧清二郎，中西栄徳
- Organizer
  日本機械学会、生産加工・工作機械部門
- Place of Presentation
  徳島大学常三島キャンパス、徳島県徳島市
- Year and Date
  2014-11-15 – 2014-11-16
- Data Source
  KAKENHI-PROJECT-24560877

1. MORI Ken-ichiro (80127167)

# of Collaborated Projects: 6 results

# of Collaborated Products: 14 results
2. HARADA Yasunori (30218656)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
3. MURAO Takuji

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. OKUBO Fujio

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. TAKUDA Hirohiko (20135528)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. OTSU Masaaki (20304032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. ABE Yohei (60402658)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. OKANE Isao (80169127)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. FUKUMOTO Masahiro (80173368)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 新家光雄 (50126942)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. MATSUDA Sinpei

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
12. OISHI Kouhei

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
13. MAKIDA Yuuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
14. OONO Masaki

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
15. UMEDA Manabu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. MATSUBARA Hideaki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MAKI Seijiro 牧 清二郎

Research Projects

Research Products

Co-Researchers

Development research on realization of a method of local hardening of steel die using rapid resistance heatingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Clearing-up of metallurgical points topay attention toonapplication of rapid resistance heating to hot-stamping process combined with press-quenchingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Establishment of Accurate Liquid Phase Fraction Control Method for Extensive Application of Aluminum Alloys to Semisolid Forging Using Resistance HeatingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Warm and Hot Press Forming of Ultra High Strength Steel Sheets Using Resistance Heating

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research of Multi-Stage Cold Deep Drawing Technique of Titanium Alloy Sheets

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Mushy-state Forging Method Using Resistance HeatingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research of Multi-Stage Cold Deep Drawing Technique of Long Pure Titanium Cups

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Micro-Macro Simulation Method for Sintering Process and Control of Microstructure

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research into Shear Deformation-added Extrusion of Metal-based Powder Using Separated Rotary ContainerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Shot Lining of Light Metals with Hard Powder

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Microscopic Approach of Plastic Deformation of Particles and Coupled Analysis with Macroscopic Approach

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study of Frictional Adhesion between Dissimilar Metals with a Background of Development of Cold Pressure Welding Using Interfacial SlidePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fundamental research on graded cermet sprayed coatings.

Principal Investigator

Project Period (FY)

Research Category

MAKI Seijiro 牧清二郎