NISHI Kazuhiko 仁志和彦

… Alternative Names

Nishi Kazuhiko 仁志和彦

Less

Researcher Number	20262412
Other IDs
External Links
Affiliation (Current)	2022: 千葉工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2017: 千葉工業大学, 工学部, 教授 2014 – 2015: 横浜国立大学, 工学(系)研究科(研究院), 准教授 2012 – 2013: 横浜国立大学, 工学研究院, 准教授 2007: YOKOHAMA NATIONAL UNIVERSITY, DIV OF MATERIAL SCIENCEAND ENGINEERING, ASOCIATE PROFESSOR 2006: Yokohama National University, Graduate School of Engineering, Associate Professor, 大学院工学研究院, 助教授 … More 2005: 横浜国立大学, 大学院・工学研究院, 講師 2000: Yokohama National Univ., Fac.of Eng., Lecturer, 工学部, 講師 1995 – 1999: 横浜国立大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Reaction engineering/Process system / 生物・生体工学 / 反応・分離工学 / Properties in chemical engineering process/Transfer operation/Unit operation Except Principal Investigator 化学工学一般 / 反応・分離工学 / Properties in chemical engineering process/Transfer operation/Unit operation / Reaction engineering/Process system
Keywords	Principal Investigator 超臨界流体 / 反応・分離工学 / 化学工学 / 気泡分散 / 気泡径分布 / 高粘性流体 / レオロジー / 擬塑性流体 / 塑性流体 / 晶析 … More / 回分晶析 / 冷却晶析 / リアルタイム高速画像処理システム / オンライン計測 / アルゴンレーザー / メカノケミカル / 粉体工学 / ミキシング / 流脈面 / 偏心撹拌 / 数値混合実験 / 完全邪魔板条件 / 撹拌所要動力 / 水平荷重 / 混合 / 非対称撹拌 / 混合指標 / 撹拌 / 流脈 / 高分子合成 / 細胞・組織 / polymerization / supercritical fluid / reaction, separation engineering / cell, cellular tissue / chemical engineering … More Except Principal Investigator 懸濁重合反応 / トモグラフィー / 懸濁重合 / Suspension Polymerization / 化学工学 / プロセス / 撹拌・混合 / 超臨界湿式粉砕法 / 媒体撹拌ミル / 粉砕エネルギー / 粉砕限界粒子径 / 粉砕速度 / 粒径分布 / 超臨界流体 / 湿式粉砕法 / 媒体攪拌ミル / 粉砕所要動力 / 湿式粉砕 / 超微粒子 / 顔料 / 重合反応システム / ファジ-制御 / モデル予測制御 / 高粘度液 / 高発熱重合反応 / 撹拌槽型反応器 / 数値解析 / 撹拌槽型重合反応器 / 温度むら / 重合物物性 / リアルタイム多点温度計測装置 / 重合シミュユレーション / ラジカル付加重合 / 熱伝達係数 / 重合反応槽 / 温度分布 / 分子量分布 / レオロジー / 攪拌槽 / polymerization system / fuzzy control / model prediction control / viscous fluids / high exothermal polymerization / Stirred tank reactor / numerical simulation / 断面計測 / 分散懸濁状態 / トモグラフィー計測 / 反応試験 / 精密制御 / Tomography Measurement / Dispersion States / 撹拌槽型晶析槽 / DTB型晶析槽 / 結晶粒径分布 / 画像処理システム / 3次元結晶イメージ / オンライン測定 / オンライン制御 / リアルタイム高速画像処理システム / 撹拌槽型晶析装置 / 分級型晶析装置 / DTB型晶析装置 / 結晶粒径分布制御 / 攪拌槽型晶析装置 / オンライン計測 / 結晶形態計測 / stirred-type crystallizer / DTB-type crystallizer / crystal size distribution / imaging processing system / 3-D crystal image / On-line measurment / On-line control / 電気抵抗トモグラフィー / 可視化手法 / 液液分散 / 相逆転現象 / 動的分散挙動 / Electrical Resistance Tomography / Visualization Methods / Liquid-Liquid Dispersion / Phase Inversion / Dynamic Dispersion Behavior / X線トモグラフィ / X線トモグラフィー / トモグラフィ / スラリー流体 / 攪拌・混合 / 流体・流動 / 撹拌 / 固気液 / 電気抵抗方式トモグラフィー計測 / 降伏応力流体 / 降伏応力 Less

Investigation of reaction and dispersion states in a suspension polymerization reactor using X-ray Tomography
- Principal Investigator
  
  Kaminoyama Meguru
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Properties in chemical engineering process/Transfer operation/Unit operation
- Research Institution
  Yokohama National University
Investigation of the dispersion and mixing states of gas-solid-liquid phases in a stirred vessel with a non-sedimenting slurry using Electrical Resistance Tomography
- Principal Investigator
  
  KAMINOYAMA Meguru
- Project Period (FY)
  2014 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Properties in chemical engineering process/Transfer operation/Unit operation
- Research Institution
  Yokohama National University
Study on the generalization of the fluid mixing theory, including an asymmetric mixingPrincipal Investigator
- Principal Investigator
  
  Nishi Kazuhiko
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Properties in chemical engineering process/Transfer operation/Unit operation
- Research Institution
  Yokohama National University
Study on the Mechanism of the Phase Inversion Phenomenon in a Suspension Polymerization Reaction with a Combined-type Tomography Measurement System
- Principal Investigator
  
  KAMINOYAMA Meguru
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Reaction engineering/Process system
- Research Institution
  Yokohama National University
超臨界二酸化炭素を反応場としたメカノケミカル反応手法の創生Principal Investigator
- Principal Investigator
  
  仁志和彦
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Reaction engineering/Process system
- Research Institution
  Yokohama National University
Investigation of the Mechanism of the Production and the Evaluation as a Cell Culture Support of Polymer Porous Medium with Controlled 3-Dimensional StructurePrincipal Investigator
- Principal Investigator
  
  NISHI Kazuhiko
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Reaction engineering/Process system
- Research Institution
  Yokohama National University
Development of advanced crystallizar with on-line control of crystal diameter distribution
- Principal Investigator
  
  KAMIWANO Mitsuo
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  化学工学一般
- Research Institution
  Yokohama National University
超臨界湿式粉砕法による超微粒子の創製
- Principal Investigator
  
  KAMIWANO Mitsuo
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  化学工学一般
- Research Institution
  Yokohama National University
Development and Applications of Advanced Control System of Polymerization Reactor using Tomography Measurement of Suspension and Dispersion States
- Principal Investigator
  
  KAMINOYAMA Meguru
- Project Period (FY)
  1997 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  反応・分離工学
- Research Institution
  Yokohama National University
超高速リアルタイム画像処理システムを用いた工業用晶析槽における結晶粒径分布計測法Principal Investigator
- Principal Investigator
  
  仁志和彦
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  反応・分離工学
- Research Institution
  Yokohama National University
バイオポリマーリアクターにおける高粘性塑性流体中の気泡分散状態の測定法Principal Investigator
- Principal Investigator
  
  仁志和彦
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  生物・生体工学
- Research Institution
  Yokohama National University
Development and Application of the Polymerization System with Fuzzy Temperature Control for Highly Viscous and Eexothermal Polymerization
- Principal Investigator
  
  KAMIWANO Mitsuo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  反応・分離工学
- Research Institution
  Yokohama National University

All 2016 2015 2014 2013 2012 2006 2005 Other

All Journal Article Presentation

[Journal Article] 電気抵抗方式トモグラフィ法を用いた化学装置における混相流の可視化計測2016
- Author(s)
  上ノ山周, 一条憲明, 仁志和彦, 三角隆太
- Journal Title
  
  化学工学: " (特集)高度化する混相流計測技術"
  
  Volume: 80 Pages: 460-463
- Data Source
  KAKENHI-PROJECT-15K14199
[Journal Article] Torque and Horizontal Load on an Agitating Shaft in an Eccentric Mixer with a MAXBLEND Impeller in a Turbulent State2016
- Author(s)
  Nishi, K., K. Sonoda, R. Misumi, M. Kaminoyama
- Journal Title
  
  J. Chem. Eng. Japan
  
  Volume: 49 Pages: 000-000
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24560920
[Journal Article] 電気抵抗方式トモグラフィ法を用いた化学装置における混相流の可視化計測2016
- Author(s)
  上ノ山周, 一条憲明, 仁志和彦，三角隆太
- Journal Title
  
  化学工学((特集)高度化する混相流計測技術)
  
  Volume: 80 Pages: 460-463
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26289285
[Journal Article] (特集)撹拌槽における異相系流体の流動挙動・混合過程・分散現象の可視化（数値流動解析手法と電気抵抗方式トモグラフィ計測法を用いて）2015
- Author(s)
  上ノ山周, 仁志和彦，三角隆太
- Journal Title
  
  混相流
  
  Volume: 29 Pages: 317-325
- Data Source
  KAKENHI-PROJECT-26289285
[Journal Article] Power Consumption and Mixing Performance of an Eccentrically Located Maxblend Impeller2014
- Author(s)
  K. Nishi, N. Enya, R. Misumi, M. Kaminoyama
- Journal Title
  
  J. Chem. Eng. Japan / JCEJ
  
  Volume: 47(2) Issue: 2 Pages: 146-150
- DOI
  10.1252/jcej.13we109
- NAID
  130003390871
- ISSN
  0021-9592, 1881-1299
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560920
[Journal Article] Effects of Impeller Type on Mixing Performance in Continuous Laminar Flow2014
- Author(s)
  Suzuki, Y., R. Misumi, K. Nishi, M. Kaminoyama
- Journal Title
  
  J. Chem. Eng. Japan
  
  Volume: 47 Pages: 805-814
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24560920
[Journal Article] Mixing Performance Evaluation in Continuous Laminar Flow2014
- Author(s)
  Suzuki, Y., R. Misumi, K. Nishi, M. Kaminoyama
- Journal Title
  
  J. Chem. Eng. Japan
  
  Volume: 47 Pages: 363-372
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24560920
[Journal Article] On-line Measuring Method to Determine Crystal Size Distribution in Stirred-Type Crystallizers Using a Real-Time, High-speed Image Processing System2006
- Author(s)
  Nishi, K., M.Kaminoyama, R.Misumi, M.Kamiwano
- Journal Title
  
  Bull.Soc.Sea Water Sci. (Jpn.) 60
  
  Pages: 365-378
- NAID
  10017956192
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360381
[Journal Article] Mechanochemical Reaction of the Alkali Metal Hydroxide in Supercritical Carbon Dioxide using the Beads Mill2006
- Author(s)
  Nishi, K., H.Kataoka, R.Misumi, M.Kaminoyama
- Journal Title
  
  Proc. 10th Asian Pacific Confederation of Chemical Engineering Congress
  
  Pages: 113-113
- Data Source
  KAKENHI-PROJECT-17656256
[Journal Article] On-line Measuring Method to Determine Crystal Size Distribution in Stirred-Type Crystallizers using a Real-Time, High-Speed Image Processing System2006
- Author(s)
  Nishi, K., R.Misumi, M.Kaminoyama, M.Kamiwano
- Journal Title
  
  Bulletin of the Society of Sea Water Science, Japan 60・5
  
  Pages: 365-378
- NAID
  10017956192
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360381
[Journal Article] Production of the Styrene Porous Medium by Cross-linked Polymerization in Supercritical Carbon Dioxide2005
- Author(s)
  Nishi, K., Y.Morikawa, R.Misumi, M.Kaminoyama
- Journal Title
  
  2005 International Symposium On Advanced Engineering
  
  Pages: 264-269
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360381
[Presentation] Study on the Mechanism of Mixing Enhancement in a Plastic Fluid by Aeration in a Stirred Vessel Equipped with a Concave Impeller2016
- Author(s)
  M. Kaminoyama, H. Nakahara, R. Misumi, K. Nishi
- Organizer
  International Workshop on Process Intensification 2016 (IWPI 2016)
- Place of Presentation
  Manchester(U.K.)
- Year and Date
  2016-09-29
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26289285
[Presentation] ２電極法を用いた小型翼付き撹拌槽における塑性流体の混合領域体積と混合過程の定量化2016
- Author(s)
  杉山幸司, 上ノ山周, 仁志和彦，三角隆太
- Organizer
  日本混相流学会混相流シンポジウム2016
- Place of Presentation
  京都
- Year and Date
  2016-08-08
- Data Source
  KAKENHI-PROJECT-26289285
[Presentation] 撹拌翼周りの流動現象2016
- Author(s)
  仁志和彦
- Organizer
  化学工学会粒子流体プロセス部会ミキシング技術分科会東日本サロン
- Place of Presentation
  群馬県高崎市
- Year and Date
  2016-01-28
- Invited
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 垂直パドル翼を用いた偏心撹拌における軸トルクと翼に作用する水平荷重の検討2015
- Author(s)
  田辺仁，三角隆太，仁志和彦，上ノ山周
- Organizer
  化学工学会第47回秋季大会
- Place of Presentation
  北海道札幌市
- Year and Date
  2015-09-09
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 撹拌翼からの流れと諸現象2015
- Author(s)
  仁志和彦
- Organizer
  化学工学会第47回秋季大会
- Place of Presentation
  北海道札幌市
- Year and Date
  2015-09-09
- Invited
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 垂直パドル翼偏心撹拌における軸トルクと翼に作用する水平荷重に及ぼす撹拌条件の影響2015
- Author(s)
  田辺仁，仁志和彦，三角隆太，上ノ山周
- Organizer
  第17回化学工学会学生発表会
- Place of Presentation
  八戸　八戸高専
- Year and Date
  2015-03-07
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Starting torque and flow dynamics of vertical paddle impellers2015
- Author(s)
  Nishi, K., Y. Bando, R. Misumi, M. Kaminoyama
- Organizer
  16th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2015)
- Place of Presentation
  Melbourne (Australia)
- Year and Date
  2015-09-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Effect of double stage paddle impeller setting conditions on structure of streak lobe in laminar mixing vessel2015
- Author(s)
  Hayashi, M., K. Nishi, R. Misumi, M. Kaminoyama
- Organizer
  16th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2015)
- Place of Presentation
  Melbourne (Australia)
- Year and Date
  2015-09-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 塑性流体撹拌槽の通気による混合促進機構の気泡通過経路と液流動状態に基づく検討2015
- Author(s)
  中原ひかり，三角隆太，仁志和彦，上ノ山周
- Organizer
  化学工学会群馬大会2015(関東支部大会) (群馬)
- Place of Presentation
  群馬・桐生市
- Year and Date
  2015-11-27
- Data Source
  KAKENHI-PROJECT-26289285
[Presentation] Horizontal Load on Agitating Shaft of Eccentric Mixing using MAXBLEND Impeller2014
- Author(s)
  K. Nishi, K. Sonoda, R. Misumi, M. Kaminoyama
- Organizer
  International Symposium on Mixing in Industrial Processes VIII
- Place of Presentation
  Melbourne, Australia
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 数値流動解析を用いた層流撹拌槽内における流脈面構造の定量化に関する検討2014
- Author(s)
  林萌夏，三角隆太，仁志和彦，上ノ山周
- Organizer
  第16回化学工学会学生発表会(東京大会)
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] マックスブレンド偏心撹拌における水平荷重2014
- Author(s)
  仁志和彦，園田一史，三角隆太，上ノ山周
- Organizer
  化学工学会第79年会 (岐阜)
- Place of Presentation
  岐阜大学柳戸キャンパス
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Study of the Starting Torque of Vertical Paddle Impellers2014
- Author(s)
  Y. Bando, K. Nishi, R. Misumi, M. Kaminoyama
- Organizer
  International Symposium on Mixing in Industrial Processes VIII
- Place of Presentation
  Melbourne, Australia
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 撹拌槽内における各種垂直パドル翼に作用する水平荷重に関する定量的検討2014
- Author(s)
  二宮和大，三角隆太，仁志和彦，上ノ山周
- Organizer
  第16回化学工学会学生発表会(東京大会)
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 流脈面の可視化観測に基づく撹拌槽内における混合過程の定量的検討2013
- Author(s)
  寺西瞳、仁志和彦、三角隆太、上ノ山周
- Organizer
  化学工学会学生発表会（米沢大会）
- Place of Presentation
  米沢
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Torque and Horizontal Load on an Agitating Shaft in an Eccentric Mixer with a Maxblend Impeller2013
- Author(s)
  Kazuhiko Nishi, Kazufumi Sonoda, Ryuta Misumi, Meguru Kaminoyama
- Organizer
  4th Asian Conference on Mixing
- Place of Presentation
  Beijing, CHINA
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] マックスブレンド偏心撹拌槽における動力および混合時間に及ぼすスケールアップの影響2013
- Author(s)
  園田一史、仁志和彦、三角隆太、上ノ山周
- Organizer
  化学工学会第７８年会
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Torque and Horizontal Load on an Agitating Shaft in an Eccentric Mixer with a MAXBLEND Impeller2013
- Author(s)
  K. Nishi, K. Sonoda, R. Misumi, M. Kaminoyama
- Organizer
  4th Asian Conference on Mixing
- Place of Presentation
  Beijing, China
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Potential of an asymmetrical agitation in industrial mixing2013
- Author(s)
  K. Nishi
- Organizer
  7th International Conference of Chemical Engineering on Science and Applications
- Place of Presentation
  Banda Aceh, Indonesia
- Invited
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Mixing in Chemical Engineering2013
- Author(s)
  Kazuhiko Nishi
- Organizer
  Chemical Engineering on Science and Applications
- Place of Presentation
  Bandaaceh-aceh, INDONESIA
- Invited
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] マックスブレンド翼付き偏心撹拌槽における軸トルクおよび翼への水平荷重の計測2012
- Author(s)
  園田一史、仁志和彦、三角隆太、上ノ山周
- Organizer
  化学工学会横浜大会
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Power Consumption and Mixing Performance of an Eccentrically Located MAXBLEND Impeller2012
- Author(s)
  Kazuhiko Nishi, Naoki Enya, Ryuta Misumi, Meguru Kaminoyama
- Organizer
  International Workshop on Process Intensification 2012
- Place of Presentation
  Seoul, KOREA
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 中高粘度液を対象としたマックスブレンド翼偏心撹拌における流動状態と混合性能2012
- Author(s)
  仁志和彦、三角隆太、上ノ山周
- Organizer
  化学工学会第４４回秋季大会
- Place of Presentation
  仙台
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 垂直パドル翼の起動トルクに及ぼす翼形状および液粘度の影響
- Author(s)
  坂東佑真，仁志和彦，三角隆太，上ノ山周
- Organizer
  化学工学会第46回秋季大会
- Place of Presentation
  福岡　九州大学
- Year and Date
  2014-09-17 – 2014-09-19
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 垂直パドル翼に作用する水平荷重に及ぼす翼形状および液粘度の影響
- Author(s)
  二宮和大，三角隆太，仁志和彦，上ノ山周
- Organizer
  化学工学会第46回秋季大会
- Place of Presentation
  福岡　九州大学
- Year and Date
  2014-09-17 – 2014-09-19
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Effects of Agitation and Fluid Concentration on the Mixing Enhancement of a Yield Stress Fluid in a Stirred Vessel with Aeration
- Author(s)
  M. Kaminoyama, H. Nakahara, S. Ikeda, R. Misumi, K. Nishi
- Organizer
  International Symposium on Mixing in Inderstrial Process VIII (ISMIP)
- Place of Presentation
  Melbourne (Australia)
- Year and Date
  2014-09-15 – 2014-09-17
- Data Source
  KAKENHI-PROJECT-26289285
[Presentation] 層流撹拌槽内における二段パドル翼の設置条件が流脈面構造に及ぼす影響
- Author(s)
  林萌夏，三角隆太，仁志和彦，上ノ山周
- Organizer
  化学工学会第80年会
- Place of Presentation
  東京　芝浦工大
- Year and Date
  2015-03-19 – 2015-03-21
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Study of the Starting Torque of Vertical Paddle Impellers
- Author(s)
  Y. Bando, K. Nishi, R. Misumi and M. Kaminoyama
- Organizer
  International Symposium on Mixing in Industrial Processes VIII (ISMIP8)
- Place of Presentation
  Melbourne (Australia)
- Year and Date
  2014-09-15 – 2014-09-17
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 大型翼を用いた偏心撹拌
- Author(s)
  仁志和彦，三角隆太，上ノ山周
- Organizer
  化学工学会第80年会
- Place of Presentation
  東京　芝浦工大
- Year and Date
  2015-03-19 – 2015-03-21
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 撹拌翼の起動トルクと翼形状の関係
- Author(s)
  仁志和彦，坂東祐真，三角隆太，上ノ山周
- Organizer
  化学工学会第80年会
- Place of Presentation
  東京　芝浦工大
- Year and Date
  2015-03-19 – 2015-03-21
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] 層流撹拌槽内における単段および二段パドル翼の流脈面構造の定量化
- Author(s)
  林萌夏，三角隆太，仁志和彦，上ノ山周
- Organizer
  化学工学会第46回秋季大会
- Place of Presentation
  福岡　九州大学
- Year and Date
  2014-09-17 – 2014-09-19
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Horizontal Load on Agitating Shaft of Eccentric Mixing using Maxblend Impeller
- Author(s)
  K. Nishi, K. Sonoda, R. Misumi and M. Kaminoyama
- Organizer
  International Symposium on Mixing in Industrial Processes VIII (ISMIP8)
- Place of Presentation
  Melbourne (Australia)
- Year and Date
  2014-09-15 – 2014-09-17
- Data Source
  KAKENHI-PROJECT-24560920
[Presentation] Mechanism of Mixing Enhancement of a Yield Stress Fluid in a Stirred Vessel with Aeration
- Author(s)
  M. Kaminoyama, S. Ikeda, H. Nakahara, R. Misumi, K. Nishi
- Organizer
  Separation Technology for Green Environment, in 67th Annual Session of the Indian Institute of Chemical Engieering(CHEMCON 2014)
- Place of Presentation
  Chandigarh (India)
- Year and Date
  2014-12-27 – 2014-12-30
- Invited
- Data Source
  KAKENHI-PROJECT-26289285

1. KAMINOYAMA Meguru (50233945)

# of Collaborated Projects: 9 results

# of Collaborated Products: 12 results
2. MISUMI Ryuta (40334635)

# of Collaborated Projects: 5 results

# of Collaborated Products: 12 results
3. KAMIWANO Mitsuo (70017896)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. TARUMOTO Jun

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. YAMAMOTO Kazumi

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. SUGIYAMA Kouji

# of Collaborated Projects: 2 results

# of Collaborated Products: 1 results
7. ARAI Kazuki

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. HAKAMADA Tokio

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. WATANABE Masatoshi (90273383)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. SHIROTA Daigo

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. NAKAHARA Hikari

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
12. YAMAMOTO Taisei

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

NISHI Kazuhiko 仁志 和彦

Nishi Kazuhiko 仁志 和彦

Research Projects

Research Products

Co-Researchers

Investigation of reaction and dispersion states in a suspension polymerization reactor using X-ray Tomography

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation of the dispersion and mixing states of gas-solid-liquid phases in a stirred vessel with a non-sedimenting slurry using Electrical Resistance Tomography

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the generalization of the fluid mixing theory, including an asymmetric mixingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the Mechanism of the Phase Inversion Phenomenon in a Suspension Polymerization Reaction with a Combined-type Tomography Measurement System

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超臨界二酸化炭素を反応場としたメカノケミカル反応手法の創生Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation of the Mechanism of the Production and the Evaluation as a Cell Culture Support of Polymer Porous Medium with Controlled 3-Dimensional StructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of advanced crystallizar with on-line control of crystal diameter distribution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超臨界湿式粉砕法による超微粒子の創製

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development and Applications of Advanced Control System of Polymerization Reactor using Tomography Measurement of Suspension and Dispersion States

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超高速リアルタイム画像処理システムを用いた工業用晶析槽における結晶粒径分布計測法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

バイオポリマーリアクターにおける高粘性塑性流体中の気泡分散状態の測定法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development and Application of the Polymerization System with Fuzzy Temperature Control for Highly Viscous and Eexothermal Polymerization

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 電気抵抗方式トモグラフィ法を用いた化学装置における混相流の可視化計測2016

Author(s)

Journal Title

NISHI Kazuhiko 仁志和彦

Nishi Kazuhiko 仁志和彦