Kozaki Masao 神崎昌郎

… Alternative Names

神崎昌郎コウザキマサオ

KOHZAKI Masao 神崎昌郎

Less

Researcher Number	20366024
Other IDs
Affiliation (Current)	2025: 愛知工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2021 – 2023: 愛知工業大学, 工学部, 教授 2008 – 2019: Tokai University, 工学部, 教授 2007: Tokai University, School ofEngineering, Associate Professor 2006: 東海大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Keywords	Principal Investigator 切削加工 / ホウ素 / スパッタリング / コーテッド工具 / TiB2 / 薄膜 / Ti合金 / MoS2 / 炭素 / 複合膜 … More / 高温潤滑性 / 材料加工・処理 / 摩擦特性 / ニアドライ加工 / h-BN / 表面反応 / 摩擦係数 / Carbon / Boron / Ti Alloy / Cutting / Sputtering / Thin Film / 難削材 / チタン Less

Improvement of high temperature lubricious properties of low frictional composite films by using reaction of boron and development of machining technology with high efficiencyPrincipal Investigator
- Principal Investigator
  
  神崎昌郎
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Aichi Institute of Technology
Production of ultra low frictional thin films for cutting tool and development of near dry machining by surface reaction on cutting toolPrincipal Investigator
- Principal Investigator
  
  Kohzaki Masao
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokai University
development of tib2+a-mos2 coated tool for cutting difficult-to-machine materials with high efficiency under a very small amount of cutting oilPrincipal Investigator
- Principal Investigator
  
  Kohzaki Masao
- Project Period (FY)
  2014 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokai University
Study of machining Ti alloy for airplanes with high efficiency by using boron containing thin films with lubricious properties at high temperaturesPrincipal Investigator
- Principal Investigator
  
  KOHZAKI Masao
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokai University
Development of super hard Ti-B-C coated tool with high thermal stability for dry cutting.Principal Investigator
- Principal Investigator
  
  KOHZAKI Masao
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokai University
High speed cutting of difficult-to-machine materials with cutting tools coated by Ti-B-C thermally stable filmsPrincipal Investigator
- Principal Investigator
  
  KOHZAKI Masao
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokai University

All 2021 2020 2019 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Other

All Journal Article Presentation

[Journal Article] Ultra – low friction characteristic of titanium diboride (TiB<sub>2</sub>) thin films at elevated temperature due to excess addition of boron2021
- Author(s)
  大和航, 神崎昌郎
- Journal Title
  
  Journal of Advanced Science
  
  Volume: 33 Issue: 0 Pages: n/a
- DOI
  10.2978/jsas.33103
- NAID
  130008058851
- ISSN
  0915-5651, 1881-3917
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21K03809
[Journal Article] Frictional Properties of TiB2+α-MoS2 Composite Films Heated in Ambient Atmosphere2019
- Author(s)
  N. Ninomiya and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing and Technology 2019
  
  Volume: 1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06089
[Journal Article] Frictional Properties of TiB2-MoS2 Composite Films Heated in Ambient Atmosphere2017
- Author(s)
  N. Ninomiya and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing and Technology 2017
  
  Volume: 1 Pages: 194-199
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Frictional Properties of TiB2-MoS2 Composite Films Heated in Ambient Atmosphere2017
- Author(s)
  N. Ninomiya and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing and Technology 2017
  
  Volume: 1 Pages: 194-199
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06089
[Journal Article] Improvement of Frictional Properties of B-C Sputtered Coatings by Introducing CH<sub>4</sub> and Evaluation of Their Cutting Performance2016
- Author(s)
  神崎昌郎，島田駿貴
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 82 Issue: 2 Pages: 198-204
- DOI
  10.2493/jjspe.82.198
- NAID
  130005124396
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Improving Mechanical Properties of TiB2 Base Films for Cutting Tools to Cut Difficult-to-machine Materials2016
- Author(s)
  S. Shimada and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing
  
  Volume: なし
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Improvement of Lubricious Properties of TiB2-MoS2 Composite Films at High Temperature2016
- Author(s)
  M. Arai and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing
  
  Volume: なし
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] TiB2ベース薄膜の機械的特性向上と切削工具への応用2015
- Author(s)
  神崎昌郎，島田駿貴
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 59 Pages: 711-716
- NAID
  130005284463
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Realization of High Temperature Lubricationg Properties of TiB2-MoS2 Composite Films2015
- Author(s)
  M. Arai and M. Kohzaki
- Journal Title
  
  Proceedings of Malaysia-Japan Joint International Conference 2015
  
  Volume: なし
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Development of Lubricious TiB2-MoS2 Composite Films by Controlling MoS2 Content2015
- Author(s)
  M. Arai and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing and Technology 2015
  
  Volume: 該当なし Pages: 76-79
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Proceedings of The International Conference on Materials Processing and2015
- Author(s)
  S. Shimada and M. Kohzaki
- Journal Title
  
  Developing the Ti-B films with High Temperature Lubricating Properties for Cutting Difficult-to-Machine Materials Processing and Technology 2015
  
  Volume: 該当なし Pages: 71-75
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Essential Research in Machining Difficult-to-machine Materials for Advancing MQL Cutting2014
- Author(s)
  S. Shimada and M. Kohzaki
- Journal Title
  
  Advanced Materials
  
  Volume: Vol.1017 Pages: 329-333
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Realization of Low Frictional Property of TiB2-MoS2 Composite Films with Low MoS2 Content2014
- Author(s)
  M. Arai and M. Kohzaki
- Journal Title
  
  Proceedings of 3rd Malaysia-Japan Tribology Symposium 2014
  
  Volume: 該当なし
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420058
[Journal Article] Production of Highly Lubricious Ti-based Ceramic Films for Reducing Friction between Web and Transiting Roller2013
- Author(s)
  M. Kohzaki and R. Makita
- Journal Title
  
  Jpn. J. Appl. Phys.
  
  Volume: Vol.52, No.5
- NAID
  210000142189
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560136
[Journal Article] Preparation of Hard and Lubricious Films by Magnetron Sputtering2013
- Author(s)
  Masao Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing and Technology 2013
  
  Volume: 2013 Pages: 33-38
- Data Source
  KAKENHI-PROJECT-23560136
[Journal Article] Production of Highly Lubricious Ti-based Ceramic Films for Reducing Friction between Web and Transiting Roller2013
- Author(s)
  Masao Kohzaki and Ryohei Makita
- Journal Title
  
  Jpn. J. Appl. Phys.
  
  Volume: 52 Issue: 5S1 Pages: 05DA03-05DA03
- DOI
  10.7567/jjap.52.05da03
- NAID
  210000142189
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560136
[Journal Article] 難削材加工用B-C系コーティング材の開発2012
- Author(s)
  神崎昌郎，森田次郎
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 56 Pages: 34-39
- NAID
  10030194585
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560136
[Journal Article] 難削材加工用B-C系コーティング材の開発2012
- Author(s)
  神崎昌郎,森田次郎
- Journal Title
  
  砥粒加工学会誌
  
  Volume: Vol.56, No.1 Pages: 34-39
- NAID
  10030194585
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560136
[Journal Article] Improvement Cutting Efficiency of Titanium Alloys by Ti-B-C Coated Tool2012
- Author(s)
  R. Makita and M. Kohzaki
- Journal Title
  
  Proceedings of The International Conference on Materials Processing and Technology 2012
  
  Pages: 129-132
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560136
[Journal Article] 高耐熱B-C-X系硬質膜を用いた難削材の高効率精密加工2009
- Author(s)
  神崎昌郎
- Journal Title
  
  東海大学紀要工学部 49
  
  Pages: 131-134
- Data Source
  KAKENHI-PROJECT-20560114
[Journal Article] 高耐熱B-C-X系硬質膜を用いた難削材の高効率加工2009
- Author(s)
  神崎昌郎
- Journal Title
  
  東海大学紀要工学部 Vol.49, No.2
  
  Pages: 131-134
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560114
[Journal Article] Ti合金切削用Ti-B-Cコーテッド工具の開発2008
- Author(s)
  森田次郎,神崎昌郎
- Journal Title
  
  東海大学紀要工学部 Vol.48, No.1
  
  Pages: 143-148
- NAID
  40016458720
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560114
[Journal Article] Improvements of Frictional Properties of B-C Sputtered Thin Films by CH_4 Gas Introduction2007
- Author(s)
  Masao, KOHZAKI
- Journal Title
  
  Tribologist Vol. 52, No. 4
  
  Pages: 303-309
- NAID
  10019919800
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560113
[Journal Article] メタンガス導入による炭化ホウ素系スパッタ薄膜の摩擦特性向上2007
- Author(s)
  神崎昌郎
- Journal Title
  
  トライボロジスト 46
  
  Pages: 303-309
- NAID
  10019919800
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560113
[Presentation] 高温環境下におけるTiB2-MoS2 複合膜の低摩擦メカニズムの解明2020
- Author(s)
  大和航，神崎昌郎
- Organizer
  日本機械学会第26期関東支部講演会第59回学生員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-17K06089
[Presentation] 摩擦係数0.01を示す潤滑性硬質膜のホウ素過剰添加による使用可能温度拡大2019
- Author(s)
  大和航，神崎昌郎
- Organizer
  SASシンポジウム
- Data Source
  KAKENHI-PROJECT-17K06089
[Presentation] Frictional Properties of TiB2-MoS2 Composite Films Heated in Ambient Atmosphere2017
- Author(s)
  N. Ninomiya and M. Kohzaki
- Organizer
  MNTC International Symposium 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06089
[Presentation] Frictional Properties of TiB2-MoS2 Composite Films Heated in Ambient Atmosphere2017
- Author(s)
  N. Ninomiya and M. Kohzaki
- Organizer
  MNTC International Symposium 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420058
[Presentation] Improvement of Mechanical Properties of TiB2 Based Films and Their Application for Cutting Tools2017
- Author(s)
  K. Tsuchiya and M. Kohzaki
- Organizer
  MNTC International Symposium 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420058
[Presentation] Improvement of Mechanical Properties of TiB2 Based Films and Their Application for Cutting Tools2017
- Author(s)
  K. Tsuchiya and M. Kohzaki
- Organizer
  MNTC International Symposium 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K06089
[Presentation] Improvement of Mechanical Properties of TiB2-MoS2 Composite Films2015
- Author(s)
  M.Arai and M. Kohzaki
- Organizer
  The International Tribology Conference Tokyo 2015
- Place of Presentation
  東京
- Year and Date
  2015-09-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420058
[Presentation] Preparation of Hard and Lubricious Films by Magnetron Sputtering2013
- Author(s)
  M. Kohzaki
- Organizer
  The International Conference on Materials Processing and Technology
- Place of Presentation
  タイ・バンコク
- Invited
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] 高機能を発揮する最先端コーティング技術2012
- Author(s)
  神崎昌郎
- Organizer
  精密工学会中国四国支部講習会「これから拡がる先進材料の加工技術」
- Place of Presentation
  岡山
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] ホウ素過剰添加によるTi合金切削用TiB2系コーティング材の高性能化2012
- Author(s)
  牧田亮平，神崎昌郎
- Organizer
  第20回機械材料・材料加工技術講演会
- Place of Presentation
  大阪工業大学
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] ホウ素過剰添加によるTi合金切削用TiB2系コーティング材の高性能化2012
- Author(s)
  牧田亮平,神崎昌郎
- Organizer
  第20回機械材料・材料加工技術講演会
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] Low Frictional Properties of Ti-based Ceramic Film Prepared by DC Magnetron Sputtering2012
- Author(s)
  M. Kohzaki
- Organizer
  The 2012 International Conference on Flexible and Printed Electronics
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] 難削材加工用B-C系コーティング材の開発2011
- Author(s)
  神崎昌郎,森田次郎
- Organizer
  2011年度砥粒加工学会学術講演会
- Place of Presentation
  岡山
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] スパッタ法による機械システム用潤滑性硬質膜の創成2011
- Author(s)
  神崎昌郎
- Organizer
  日本塑性加工学会接合・複合分科会第79回研究会
- Place of Presentation
  神奈川
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] Production of TiB2 Based Ti-B-C Coated Tools for Cutting Titanium Alloy2011
- Author(s)
  Masao Kohzaki
- Organizer
  26th American Society for Precision Engineering Annual Meeting
- Place of Presentation
  デンバー（アメリカ）
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] 難削材加工用B-C系コーティング材の開発2011
- Author(s)
  神崎昌郎，森田次郎
- Organizer
  砥粒加工学会
- Place of Presentation
  中部大学（愛知県）
- Data Source
  KAKENHI-PROJECT-23560136
[Presentation] 航空機用材料の加工に適したホウ素含有潤滑性硬質膜の創成およびそのドライ加工性能2010
- Author(s)
  稲葉翔一,神崎昌郎
- Organizer
  2010年度精密工学会春季大会
- Place of Presentation
  埼玉大学
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] TiB_2薄膜の硬質化と航空機材料用切削工具への応用2010
- Author(s)
  頓所孝文,神崎昌郎
- Organizer
  日本機械学会2010年度年次大会
- Place of Presentation
  名古屋工業大学
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] Ti-B-Cコーテッド工具の開発とTi合金の切削性の評価2009
- Author(s)
  稲葉翔一,神崎昌郎
- Organizer
  2009年度精密工学会春季大会
- Place of Presentation
  中央大学
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] Development of High Adhesive and Lubricious Ti-B-C Thin Films for Cutting of Ti Alloys2009
- Author(s)
  稲葉翔一, 神崎昌郎
- Organizer
  Proceedings of World Tribology Congress 2009, (2009) in CD
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] TiB_<2+α>を出発源とするTi-B-C薄膜の創成とその硬度・摩擦特性の制御2009
- Author(s)
  稲葉翔一,神崎昌郎
- Organizer
  平成21年度神奈川県ものづくり技術交流会
- Place of Presentation
  神奈川県産業技術センター
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] TiB_2を骨格としたTi合金加工用潤滑性硬質膜の創成2009
- Author(s)
  稲葉翔一,神崎昌郎
- Organizer
  日本機械学会2009年度年次大会
- Place of Presentation
  岩手大学
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] Ti-B-C薄膜の低摩擦化と切削工具への応用検討2008
- Author(s)
  稲葉翔一,神崎昌郎
- Organizer
  日本機械学会2008年度年次大会
- Place of Presentation
  横浜国立大学
- Data Source
  KAKENHI-PROJECT-20560114
[Presentation] 機械システム用潤滑性硬質膜の創成2008
- Author(s)
  神崎昌郎
- Organizer
  産学コラボレーション2008
- Place of Presentation
  府中市市民会館
- Year and Date
  2008-01-28
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560113
[Presentation] Production of Lubricious Hard Films for Mechanical System2008
- Author(s)
  Masao, KOHZAKI
- Organizer
  The Conference on Industry-University Collaboration
- Place of Presentation
  Tokyo
- Year and Date
  2008-01-28
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560113
[Presentation] ホウ素過剰添加によるTiB2膜の機械的特性向上
- Author(s)
  島田駿貴，神崎昌郎
- Organizer
  2014年度砥粒加工学会学術講演会
- Place of Presentation
  岩手大学（岩手県盛岡市）
- Year and Date
  2014-09-11 – 2014-09-13
- Data Source
  KAKENHI-PROJECT-26420058
[Presentation] MoS2添加による高潤滑性TiB2基複合膜の創成
- Author(s)
  荒井政俊，神崎昌郎
- Organizer
  トライボロジー会議2014秋盛岡
- Place of Presentation
  岩手大学（岩手県盛岡市）
- Year and Date
  2014-11-05 – 2014-11-08
- Data Source
  KAKENHI-PROJECT-26420058
[Presentation] MoS2含有量制御によるTiB2-MoS2複合膜の低摩擦特性の発現
- Author(s)
  荒井政俊，神崎昌郎
- Organizer
  2014年度砥粒加工学会学術講演会
- Place of Presentation
  岩手大学（岩手県盛岡市）
- Year and Date
  2014-09-11 – 2014-09-13
- Data Source
  KAKENHI-PROJECT-26420058

1. MATSUMURO Akinto (80173889)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Kozaki Masao 神崎 昌郎

神崎 昌郎 コウザキ マサオ

KOHZAKI Masao 神崎 昌郎

Research Projects

Research Products

Co-Researchers

Improvement of high temperature lubricious properties of low frictional composite films by using reaction of boron and development of machining technology with high efficiencyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Production of ultra low frictional thin films for cutting tool and development of near dry machining by surface reaction on cutting toolPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

development of tib2+a-mos2 coated tool for cutting difficult-to-machine materials with high efficiency under a very small amount of cutting oilPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study of machining Ti alloy for airplanes with high efficiency by using boron containing thin films with lubricious properties at high temperaturesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of super hard Ti-B-C coated tool with high thermal stability for dry cutting.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High speed cutting of difficult-to-machine materials with cutting tools coated by Ti-B-C thermally stable filmsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Ultra – low friction characteristic of titanium diboride (TiB<sub>2</sub>) thin films at elevated temperature due to excess addition of boron2021

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Frictional Properties of TiB2+α-MoS2 Composite Films Heated in Ambient Atmosphere2019

Author(s)

Journal Title

Data Source

[Journal Article] Frictional Properties of TiB2-MoS2 Composite Films Heated in Ambient Atmosphere2017

Author(s)

Journal Title

Data Source

[Journal Article] Frictional Properties of TiB2-MoS2 Composite Films Heated in Ambient Atmosphere2017

Author(s)

Journal Title

Data Source

[Journal Article] Improvement of Frictional Properties of B-C Sputtered Coatings by Introducing CH<sub>4</sub> and Evaluation of Their Cutting Performance2016

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Improving Mechanical Properties of TiB2 Base Films for Cutting Tools to Cut Difficult-to-machine Materials2016

Author(s)

Journal Title

Data Source

[Journal Article] Improvement of Lubricious Properties of TiB2-MoS2 Composite Films at High Temperature2016

Author(s)

Journal Title

Data Source

[Journal Article] TiB2ベース薄膜の機械的特性向上と切削工具への応用2015

Author(s)

Kozaki Masao 神崎昌郎

神崎昌郎コウザキマサオ

KOHZAKI Masao 神崎昌郎