KAMIMURA Yasuyuk 上村康幸

Researcher Number	20396906
Affiliation (based on the past Project Information) *help	2018 – 2019: 東京大学, 生産技術研究所, 技術専門職員 2013 – 2017: 東京大学, 生産技術研究所, 技術専門員 2010 – 2012: 東京大学, 生産技術研究所, 技術専門職員
Review Section/Research Field	Principal Investigator Production engineering/Processing studies
Keywords	Principal Investigator 複合めっき / 平滑化 / 充填剤 / スパイラル気孔 / 固定砥粒 / 極細線ワイヤ / 熱間引き抜き / 鏡面加工 / カーフロスの最小化 / 熱間引き伸ばし … More / 電着ワイヤ / 焼結 / カーフロス / 切断 / ポリイミド樹脂 / ポリイミドチューブ / 研磨剤 / ワイヤー / スクラッチ / 分散材 / 凝集 / 導電性砥粒 / 凝集砥粒 / 気孔充填 / 砥粒分散 / メディア砥粒 / 固定砥粒工具 / スパイラル / 連続気孔 / 砥粒率 / 電着 / 気孔 / ドレスレス / 目詰まり / スパイラルワイヤ Less

Development of wire tool by considering cutting surfacePrincipal Investigator
- Principal Investigator
  
  kamimura yasuyuki
- Project Period (FY)
  2016 – 2019
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Tokyo
Development on fixed abrasive tool with damage-less spiral structure toolPrincipal Investigator
- Principal Investigator
  
  kamimura yasuyuki
- Project Period (FY)
  2013 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Tokyo
Development onfixed abrasivetool with continuous porePrincipal Investigator
- Principal Investigator
  
  KAMIMURA Yasuyuk
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  The University of Tokyo

All 2019 2018 2017 2016 2015 2012 2011 2010 Other

All Journal Article Presentation

[Journal Article] スパイラル工具の連続気孔が切くずの排出性に及ぼす効果2019
- Author(s)
  上村康幸、土屋健介
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 8 Pages: 28-32
- NAID
  130007926210
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K14127
[Journal Article] Development of fixed-abrasive tool with spiral groove for decreasing the loading2012
- Author(s)
  K. Tsuchiya, Y. Kamimura, Y. Tani and S. B. Lee /T. Matsuo
- Journal Title
  
  CIRP Annals
  
  Volume: Volume 61 Pages: 287-290
- NAID
  130003393849
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560104
[Journal Article] Development of fixed-abrasive tool with spiral groove for decreasing the loading2012
- Author(s)
  Kensuke Tsuc hiya, Yasuyuki Kamimura, Yasuhiro Tani, Seungbok Lee
- Journal Title
  
  CIRP Annals
  
  Volume: Vol.61 Pages: 287-290
- NAID
  130003393849
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560104
[Journal Article] 連続気孔を有する固定砥粒工具の開発2010
- Author(s)
  上村康幸・土屋健介・谷泰弘・李承福
- Journal Title
  
  第14回国際工作機械技術者会議論文集
  
  Pages: 26-27
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] Proposal of fixed abrasive wire tool for thin wires considering mirror cutting2019
- Author(s)
  Y. Kamimura and K. Tsuchiya
- Organizer
  euspen19th
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K14127
[Presentation] 鏡面切断を考慮した細線用固定砥粒ワイヤ工具の開発2019
- Author(s)
  上村康幸、土屋健介
- Organizer
  総合技術研究会
- Data Source
  KAKENHI-PROJECT-16K14127
[Presentation] 鏡面切断を考慮した固定砥粒ワイヤ工具の提案2018
- Author(s)
  上村康幸、土屋健介
- Organizer
  砥粒加工学会
- Data Source
  KAKENHI-PROJECT-16K14127
[Presentation] 鏡面切断用固定砥粒ワイヤ工具の開発2018
- Author(s)
  上村康幸、土屋健介
- Organizer
  IMEC
- Data Source
  KAKENHI-PROJECT-16K14127
[Presentation] 二層構造工具によるワンプロセス鏡面研磨2017
- Author(s)
  上村康幸、土屋健介
- Organizer
  総合技術研究会
- Place of Presentation
  東京大学
- Year and Date
  2017-03-08
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] 鏡面切断用固定砥粒工具の提案2017
- Author(s)
  上村康幸・土屋健介
- Organizer
  砥粒加工学会
- Data Source
  KAKENHI-PROJECT-16K14127
[Presentation] 単一固定砥粒工具による粗面ガラスの鏡面加工プロセス2016
- Author(s)
  上村康幸、土屋健介
- Organizer
  砥粒加工学会
- Place of Presentation
  兵庫県立大学　姫路環境人間キャンパス
- Year and Date
  2016-08-31
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] Mirror-polishing of rough surface glass by soothing of abrasive layer2016
- Author(s)
  上村康幸、土屋健介
- Organizer
  euspen2016
- Place of Presentation
  UK, ノッティンガム大学
- Year and Date
  2016-05-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] 気孔充填メディア砥粒工具による粗面ガラスの鏡面加工2015
- Author(s)
  上村康幸、土屋健介
- Organizer
  砥粒加工学会
- Place of Presentation
  慶応大学
- Year and Date
  2015-09-09
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] Development of fixed-abrasive tool with spiral groove for decreasing the loading2012
- Author(s)
  K. Tsuchiya, Y. Kamimura, Y. Tani and S. B. Lee /T. Matsuo
- Organizer
  CIRP
- Place of Presentation
  Hong Kong china
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] Development of fix-edabrasivetool with spiral groove for decreasing the loading2012
- Author(s)
  K. Tsuchiy,a Y. Kamimura, Y. Tani, S.B. Lee
- Organizer
  CIRP Annals
- Place of Presentation
  Hong Kong CHINA.
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 気孔充填型固定砥粒工具の提案2012
- Author(s)
  上村康幸、土屋健介
- Organizer
  砥粒加工学会講演論文集
- Place of Presentation
  同志社大学
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] Development of fixed-abrasive tool without loading2012
- Author(s)
  Y. Kamimura, K. Tsuchiya, Y. Tani and S. B. Lee
- Organizer
  euspen
- Place of Presentation
  stockholm　sweden
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 気孔充填型固定砥粒工具の提案2012
- Author(s)
  上村康幸・土屋健介
- Organizer
  砥粒加工学会
- Place of Presentation
  同志社大学
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] アシストレス固定砥粒工具の開発2012
- Author(s)
  上村康幸、土屋健介、谷泰弘、李承福、
- Organizer
  第15回国際工作機械技術者会議論文集、
- Place of Presentation
  東京ビッグサイト
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] アシストレス固定砥粒工具の開発2012
- Author(s)
  上村康幸、土屋健介、谷泰弘、李承福
- Organizer
  国際工作機械技術者会議論文集
- Place of Presentation
  東京ビッグサイト
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] Developmentfoifxed-abrasivetool without loading2012
- Author(s)
  Y. Kamimura, K. Tsuchiya, Y. Tani, S.B. Lee
- Organizer
  euspen
- Place of Presentation
  Stockholm SWEDEN.
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 連続気孔を有する固定砥粒工具の提案2011
- Author(s)
  上村康幸、土屋健介、谷泰弘、李承福
- Organizer
  砥粒加工学会講演論文集
- Place of Presentation
  中部大学
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 連続気孔を有する固定砥粒工具の開発2011
- Author(s)
  上村康幸・土屋健介・谷泰弘・李承福
- Organizer
  砥粒加工学会
- Place of Presentation
  中部大学
- Year and Date
  2011-09-08
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 連続気孔を有する固定砥粒工具の提案2010
- Author(s)
  上村康幸、土屋健介、谷泰弘、李承福
- Organizer
  砥粒加工学会講演論文集
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 連続気孔を有する固定砥粒工具の開発2010
- Author(s)
  上村康幸・土屋健介・谷泰弘・李承福
- Organizer
  砥粒加工学会
- Place of Presentation
  岡山大学
- Year and Date
  2010-08-27
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] 連続気孔を有する固定砥粒工具の開発2010
- Author(s)
  上村康幸、土屋健介、谷泰弘、李承福
- Organizer
  第14回国際工作機械技術者会議論文集
- Place of Presentation
  東京ビッグサイト
- Data Source
  KAKENHI-PROJECT-22560104
[Presentation] Element technologies of fix-abrasive tools with a apiral wire used for high-precision machining
- Author(s)
  kamimura yasuyuki, tsuchiya kensuke
- Organizer
  euspen
- Place of Presentation
  Dubrovnik
- Year and Date
  2014-06-02 – 2014-06-06
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] 固定砥粒スパイラル工具を使用した高精度加工
- Author(s)
  上村康幸、土屋健介
- Organizer
  IMEC
- Place of Presentation
  東京ビッグサイト
- Year and Date
  2014-10-30 – 2014-11-04
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] 固定砥粒スパイラル工具を使用した高精度加工
- Author(s)
  上村康幸、土屋健介
- Organizer
  砥粒加工学会
- Place of Presentation
  岩手大学
- Year and Date
  2014-09-11 – 2014-09-13
- Data Source
  KAKENHI-PROJECT-25420046
[Presentation] 導電性砥粒の分散化技術
- Author(s)
  上村康幸、土屋健介
- Organizer
  総合技術研究会
- Place of Presentation
  北海道大学
- Year and Date
  2014-09-04 – 2014-09-05
- Data Source
  KAKENHI-PROJECT-25420046

1. TSUCHIYA Kensuke (80345173)

# of Collaborated Projects: 3 results

# of Collaborated Products: 28 results

KAMIMURA Yasuyuk 上村 康幸

Research Projects

Research Products

Co-Researchers

Development of wire tool by considering cutting surfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development on fixed abrasive tool with damage-less spiral structure toolPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development onfixed abrasivetool with continuous porePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] スパイラル工具の連続気孔が切くずの排出性に及ぼす効果2019

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Development of fixed-abrasive tool with spiral groove for decreasing the loading2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Development of fixed-abrasive tool with spiral groove for decreasing the loading2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 連続気孔を有する固定砥粒工具の開発2010

Author(s)

Journal Title

Data Source

[Presentation] Proposal of fixed abrasive wire tool for thin wires considering mirror cutting2019

Author(s)

Organizer

Data Source

[Presentation] 鏡面切断を考慮した細線用固定砥粒ワイヤ工具の開発2019

Author(s)

Organizer

Data Source

[Presentation] 鏡面切断を考慮した固定砥粒ワイヤ工具の提案2018

Author(s)

Organizer

Data Source

[Presentation] 鏡面切断用固定砥粒ワイヤ工具の開発2018

Author(s)

Organizer

Data Source

[Presentation] 二層構造工具によるワンプロセス鏡面研磨2017

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] 鏡面切断用固定砥粒工具の提案2017

Author(s)

Organizer

Data Source

[Presentation] 単一固定砥粒工具による粗面ガラスの鏡面加工プロセス2016

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] Mirror-polishing of rough surface glass by soothing of abrasive layer2016

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] 気孔充填メディア砥粒工具による粗面ガラスの鏡面加工2015

KAMIMURA Yasuyuk 上村康幸