TAMAKI Junichi 田牧純一

… Alternative Names

TAMAKI Jun'ichi 田牧純一

田牧純一タマキジュンイチ

Less

Researcher Number	30005516
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2003 – 2006: 北見工業大学, 工学部, 教授 2000 – 2001: 北見工業大学, 工学部, 教授 1997 – 1998: 北見工業大学, 工学部, 教授 1995: Faculty of Engineering, Kitami Institute of Technology, Professor, 工学部, 教授 1994 – 1995: 北見工業大学, 工学部, 助教授 1988: 東北大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies Except Principal Investigator 機械工作 / Production engineering/Processing studies
Keywords	Principal Investigator 研削仕上面粗さ / 研削性能 / GRINDING WHEEL RADIAL WEAR / GROUND SURFACE ROUGHNESS / GRINDING FORCE / FREQUENCY ANALYSIS / SMALL CBN GRINDING WHEEL / INTERNAL GRINDING / METAL-BONDED DRESSER / ROTARY DIAMOND DRESSER … More / ドレッサ切込み量 / 接触点検出装置 / 機上形状修正 / 低速回転高剛性ドレッサ / 研削仕上げ面粗さ / ホイール半径摩耗 / 砥石作業面 / ロータリドレッサ / 砥石半径減耗量 / 研削抵抗 / 周波数解析 / CBN小径砥石 / 内面研削 / メタルボンドドレッサ / ロータリダイヤモンドドレッサ / Envelope Generation / Electro-Contact Discharge Dressing / Shape of Abrasive Cutting Edge / Cutting Edge Truncation / Grinding Simulation / Metal-Bonded Grinding Wheel / Ductile Regime Grinding / Optical Glass / トポグラフィの最適化 / 切れ刃形状 / モンテカルロ法 / 脆性材料 / メタルボンドホイール / 精密ツルーイング / 走査型レーザ顕微鏡 / ダイヤモンド砥粒 / 延性モード研削 / 包絡線創成法 / 接触放電ツルーイング / 砥粒切れ刃の立体形状 / 切れ刃トランケーション / 研削シミュレーション / メタルボンドダイヤモンドホイール / 延性モード加工 / 光学ガラス / ク-ラント効果 / YAGレーザ加工 / マイクロパタ-ニング / ホイール作業面 / cBN研削ホイール / 研削砥石 / 研削点温度 / 研削油剤供給状態 / 研削温度 / 流れの可視化 / マイクロパターニング / 研削液供給状態 / 研削用砥石作業面 / Truing / Grinding performance / Topography / YAG laser / Mounted grinding wheel / Electroplated CBN quill / 砥粒突出し量 / レーザビーム近接量 / 切れ刃密度 / 磁石表面トポグラフィ / ツル-イング / ダイヤモンド電着クイル / cBN電着クイル / 砥石ツル-イング / 切れ刃トポグラフィ / YAGレーザ / 軸付き小径砥石 / 電着CBNクイル … More Except Principal Investigator On Machine Measurement / Precision Measurement / Mirror Shape / Differential Measurement / Autocollimation / Laser Diode / レーザオートコリメーション / 迅速測定 / 走査基準 / 精密測定 / 鏡面 / オンマシン測定 / 差動測定 / 走査型測定 / 鏡面形状 / オ-トコリメ-ション / 半導体位置検出素子 / 半導体レ-ザ / GRINDING SIMULATION / CUTTING EDGE TRUNCATION / CRITICAL DEPTH OF CUT / SINGLE POINT DIAMOND CUTTING / SHAPE OF ABRASIVE CUTTING EDGE / DIAMOND ABRASIVE GRAIN / DUCTILE MODE GRINDING / OPTICAL BRITTLE MATERIAL / 光学用脆性材料 / 臨海切込み深さ / 研削シミュレーション / 切れ刃トランケーション / 臨界切込み深さ / 単粒ダイヤモンド切削 / 砥粒切れ刃形状 / ダイヤモンド砥粒 / 延性モード研削 / 光学用硬脆材料 Less

EFFECT OF CUTTING EDGE SHAPE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTICAL BRITTLE MATERIAL
- Principal Investigator
  
  KUBO Akihiko
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  KITAMI INSTITUTE OF TECHNOLOGY
STABILIZATION OF DRESSING PERFORMANCE OF ROTARY DIAMOND DRESSER BY MEANS OF ON-THE-MACHINE PROFILE CONDITIONINGPrincipal Investigator
- Principal Investigator
  
  TAMAKI Junichi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  KITAMI INSTITUTE OF TECHNOLOGY
Ductile Regime Grinding of Hard and Brittle Materials Based on Optimum Design of Cutting Edge TruncationPrincipal Investigator
- Principal Investigator
  
  TAMAKI Jun'ichi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kitami Institute of Technology
超高速研削用砥石作業面のマイクロパターニングによるクーラント効果の改善Principal Investigator
- Principal Investigator
  
  田牧純一
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kitami Institute of Technology
Study on YAG laser-aided Dressing of Electroplated CBN QuillPrincipal Investigator
- Principal Investigator
  
  TAMAKI Junichi
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kitami Institute of Technology
Development of a Differential Laser Autocollimation Probe for precision measurement of mirror shapes
- Principal Investigator
  
  KAMADA Osamu
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  機械工作
- Research Institution
  TOHOKU UNIVERSITY

All 2006 2005

All Journal Article

[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON DUCTILE-REGIME GRINDING OF HARD AND BRITTLE MATERIALS2006
- Author(s)
  X.KANG, J.TAMAKI, A.KUBO
- Journal Title
  
  INT.JOURNAL OF MANUFACTURING TECHNOLOGY AND MANAGEMENT 9
  
  Pages: 183-200
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006
- Author(s)
  X.Kang, J.Tamaki, A.Kubo
- Journal Title
  
  Int. Journal of Manufacturing Technology and Management Vol. 9
  
  Pages: 183-200
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006
- Author(s)
  X.Kang, J.Tamaki, A.Kubo
- Journal Title
  
  Int. Journal of Manufacturing Technology and Management Vol.9
  
  Pages: 183-200
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] Effect of cutting edge truncation on ground surface morphology of hard and brittle materials for optical devices2005
- Author(s)
  X.Kang, J.Tamaki, A.Kubo, J.Yan
- Journal Title
  
  Key Engineering Materials Vol.291-292
  
  Pages: 139-144
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] 光学ガラスの延性モード研削性能に及ぼすダイヤモンド砥粒切れ刃形状の影響2005
- Author(s)
  田牧純一, 佐藤元, 前川公貴, 閻紀旺, 久保明彦
- Journal Title
  
  砥粒加工学会誌 49巻6号
  
  Pages: 37-41
- NAID
  130004494367
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON GROUND SURFACE MORPHOLOGY OF HARD AND BRITTLE MATERIALS FOR OPTICAL DEVICES2005
- Author(s)
  X.KANG, J.TAMAKI, A.KUBO, J.YAN
- Journal Title
  
  KEY ENGINEERING MATERIALS 291-292
  
  Pages: 139-144
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] EFFECT OF CUTTING EDGE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTIC GLASS2005
- Author(s)
  J.TAMAKIT, G.SATO, K.MAEKAWA, J.YAN, A.KUBO
- Journal Title
  
  JOURNAL OF THE JAPAN SOCIETY FOR ABRASIVE TECHNOLOGY 49-6
  
  Pages: 335-340
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] 光学ガラスの延性モード研削性能に及ぼすダイヤモンド砥粒切れ刃形状の影響2005
- Author(s)
  田牧純一, 佐藤元, 前川公貴, 閻紀旺, 久保明彦
- Journal Title
  
  砥粒加工学会 49巻6号
  
  Pages: 335-340
- NAID
  130004494367
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560087

1. KUBO Akihiro (40178025)

# of Collaborated Projects: 5 results

# of Collaborated Products: 8 results
2. KITAGAWA Takeaki (40003165)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. YAN Jiwang (40323042)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. KAMADA Osamu (00006131)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. KIYONO Satoshi (40005468)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. SATOH Eiich

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

TAMAKI Junichi 田牧 純一

TAMAKI Jun'ichi 田牧 純一

田牧 純一 タマキ ジュンイチ

Research Projects

Research Products

Co-Researchers

EFFECT OF CUTTING EDGE SHAPE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTICAL BRITTLE MATERIAL

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STABILIZATION OF DRESSING PERFORMANCE OF ROTARY DIAMOND DRESSER BY MEANS OF ON-THE-MACHINE PROFILE CONDITIONINGPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ductile Regime Grinding of Hard and Brittle Materials Based on Optimum Design of Cutting Edge TruncationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超高速研削用砥石作業面のマイクロパターニングによるクーラント効果の改善Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on YAG laser-aided Dressing of Electroplated CBN QuillPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Differential Laser Autocollimation Probe for precision measurement of mirror shapes

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON DUCTILE-REGIME GRINDING OF HARD AND BRITTLE MATERIALS2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006

Author(s)

Journal Title

Data Source

[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Effect of cutting edge truncation on ground surface morphology of hard and brittle materials for optical devices2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] 光学ガラスの延性モード研削性能に及ぼすダイヤモンド砥粒切れ刃形状の影響2005

Author(s)

Journal Title

NAID

Data Source

[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON GROUND SURFACE MORPHOLOGY OF HARD AND BRITTLE MATERIALS FOR OPTICAL DEVICES2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] EFFECT OF CUTTING EDGE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTIC GLASS2005

Author(s)

Journal Title

Description

Data Source

[Journal Article] 光学ガラスの延性モード研削性能に及ぼすダイヤモンド砥粒切れ刃形状の影響2005

Author(s)

Journal Title

NAID

TAMAKI Junichi 田牧純一

TAMAKI Jun'ichi 田牧純一

田牧純一タマキジュンイチ