AZUSHIMA Akira 小豆島明

… Alternative Names

小豆島明アズシマアキラ

Less

Researcher Number	30111462
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2006: Yokohama National University, Graduate School of Engineering, Professor, 大学院工学研究院, 教授 2005: 横浜国立大学, 大学院・工学研究院, 教授 1994 – 1998: 横浜国立大学, 工学部, 教授 1990: 横浜国立大学, 工学部, 教授 1987 – 1988: 横浜国立大学, 工学部, 助教授 1985: 横浜国立大学, 工, 助教授
Review Section/Research Field	Principal Investigator Material processing/treatments / 機械工作 / Material processing/treatments / 金属加工(含鋳造) Except Principal Investigator 機械工作
Keywords	Principal Investigator 塑性加工 / ECAE / Metal Forming / Tribology / トライボロジー / Oil film thickness / Friction pick up / Coefficient of friction / Simulator / Lubricant … More / 実用化 / 界面温度 / 油膜厚み / 焼付き / 摩擦係数 / 評価試験機 / 塑性加工用潤滑剤 / micro screw / Heat treatment / Ductility / Tensile strength / Grain refinement / Crystal grain / Plane Carbon steel / マイクロボルト / 熱処理 / 延性 / 引張強さ / 微細化 / 結晶粒 / 炭素鋼 / Glow discharged spectrometry / X-ray fluorescence spectroscopy / Friction surface / Plastic working / Tool surface / Characterization / 工具 / すべり圧延 / 表面分析 / 表面生成物 / 熱間圧延 / グロー放電 / 蛍光X線 / 摩擦面 / 工具表面 / キャラクタリゼーション / Inline Process Measurement / Image Processor / Laser Beam / レーザ光 / インラインプロセス計測 / 画像処理 / レーザ / Lubrication Mechanism / Direct Observation / Fluorescer / 潤滑機構 / 直接観察 / 蛍光法 / しでき加工 / 引抜き加工 / 鏡面 / マイクロ塑性流体潤滑 / トライボロジ- … More Except Principal Investigator FEM / direct observation / drawing / micro-plasto-hydrodynamic lubrication / 凹部形状変化 / 潤滑油粘度 / 画像処理 / 封入潤滑油 / 剛塑性有限要素法 / 直接観察 / 引抜加工 / ミクロ塑性流体潤滑 Less

Development of functional materials by ECAE and subsequent heat treatmentPrincipal Investigator
- Principal Investigator
  
  AZUSHIMA Akira
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Graduate School of Engineering, Yokohama National University
Elucidation for Micro-Tribology Behavior by Characterization of the Coating on Tool SurfacePrincipal Investigator
- Principal Investigator
  
  AZUSHIMA Akira
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Yokohama National University
Development of Inline Apparatus for Measurement of Deformed Surface by means of Image Processor with Laser BeamPrincipal Investigator
- Principal Investigator
  
  AZUSHIMA Akira
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  YOKOHAMA NATIONAL UNIVERSITY
Investigation into Lubrication Mechanism at the interface between Tool and Workpiece by Using Lubricant with Fluorescer in Metal FormingPrincipal Investigator
- Principal Investigator
  
  AZUSHIMA Akira
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Yokohama National University
トライボシステムによる塑性加工品表面の鏡面化に関する研究Principal Investigator
- Principal Investigator
  
  小豆島明
- Project Period (FY)
  1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Yokohama National University
Direct Observation of the Micro-Plasto-Hydrodynamic Lubrication Mechanism at the Interface between Workpiece and Die by Microscope
- Principal Investigator
  
  KUDO Hideaki
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Yokohama National University
Study on Development of Simulator for Evaluating the Lubricity of Lubricant in MetalwirkingPrincipal Investigator
- Principal Investigator
  
  AZUSHIMA Akira
- Project Period (FY)
  1984 – 1985
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  機械工作
- Research Institution
  Yokohama National University

All 2007 2006 2005

All Journal Article

[Journal Article] Development and properties of high strengthened carbon steels produced by repetitive extrusion and heat treatment process2007
- Author(s)
  K.Aoki, A.Azushima
- Journal Title
  
  Proc. Thermec 2006 MATERIALS SCIENCE FORUM 539-543
  
  Pages: 2884-2891
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360350
[Journal Article] Development and properties of high strengthened carbon steels produced by repetitive extrusion and heat treatment process2007
- Author(s)
  K.Aoki, A.Azushima
- Journal Title
  
  Proc.Thermec 2006 MATERIALS SCIENCE FORUM 539-543
  
  Pages: 2884-2891
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360350
[Journal Article] Manufacture of micro-bolt using plane carbon steels fabricated by ECAE process (in Japanese)2006
- Author(s)
  K.Joko, A.Yanagida, A.Azushima
- Journal Title
  
  Proc.2006 Jpn.Spring Conf.Techn.Plasticity
  
  Pages: 309-310
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360350
[Journal Article] ECAE加工を施した炭素鋼を用いたマイクロボルトの創製2006
- Author(s)
  上甲和文, 柳田明, 小豆島明
- Journal Title
  
  第57回塑性加工連合講演会
  
  Pages: 309-310
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360350
[Journal Article] AZ31の温間ECAE加工プロセスの最適化2005
- Author(s)
  平嶋直人, 小豆島明, 青木孝史朗
- Journal Title
  
  平成17年度塑性加工春季講演会講演論文集
  
  Pages: 305-306
- Data Source
  KAKENHI-PROJECT-17360350

1. AOKI Koshiro (70262409)

# of Collaborated Projects: 4 results

# of Collaborated Products: 3 results
2. TSUBOUCHI Masao (20017908)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. KUDO Hideaki (90017848)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

AZUSHIMA Akira 小豆島 明

小豆島 明 アズシマ アキラ

Research Projects

Research Products

Co-Researchers

Development of functional materials by ECAE and subsequent heat treatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Elucidation for Micro-Tribology Behavior by Characterization of the Coating on Tool SurfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Inline Apparatus for Measurement of Deformed Surface by means of Image Processor with Laser BeamPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation into Lubrication Mechanism at the interface between Tool and Workpiece by Using Lubricant with Fluorescer in Metal FormingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

トライボシステムによる塑性加工品表面の鏡面化に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Direct Observation of the Micro-Plasto-Hydrodynamic Lubrication Mechanism at the Interface between Workpiece and Die by Microscope

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Development of Simulator for Evaluating the Lubricity of Lubricant in MetalwirkingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Development and properties of high strengthened carbon steels produced by repetitive extrusion and heat treatment process2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] Development and properties of high strengthened carbon steels produced by repetitive extrusion and heat treatment process2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] Manufacture of micro-bolt using plane carbon steels fabricated by ECAE process (in Japanese)2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] ECAE加工を施した炭素鋼を用いたマイクロボルトの創製2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] AZ31の温間ECAE加工プロセスの最適化2005

Author(s)

Journal Title

Data Source

AZUSHIMA Akira 小豆島明

小豆島明アズシマアキラ