TSUGHIDA Yoighi 土田陽一

… Alternative Names

TSUCHIDA Yoichi 土田陽一

Less

Researcher Number	30144190
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2016 – 2017: 名古屋工業大学, 工学(系)研究科(研究院), 准教授 2009 – 2011: Nagoya Institute of Technology, 工学研究科, 准教授 2007: Nagoya Institute of Technology, Graduate School of Engineering, Associate Prof. 2006: 名古屋工業大学, 工学研究科, 助教授 2003 – 2004: 名古屋工業大学, 大学院・工学研究科, 助教授 … More 2003: Nagoya Institute of Technology, Graduate School of Engineering, Associate Prof., 工学研究科, 助教授 2002: 名古屋工業大学, 工学部, 助教授 1995 – 2000: 名古屋工業大学, 工学部, 助教授 1991 – 1993: 名古屋工業大学, 工学部, 助教授 Less
Review Section/Research Field	Principal Investigator Fluid engineering / Fluid engineering Except Principal Investigator Fluid engineering / Fluid engineering
Keywords	Principal Investigator エクマン層 / 準剛体回転流 / スチュワートソン層 / 湿式分級 / 遠心分級 / Almost Rigidly Rotating Flow / 軸対称流 / 内部流 / Ekman Layer / Centrifugal Classification … More / Internal Flow / Stewartson Layer / 三産物分級 / Wet-type Classification / Axisymmetric Flow / Particle Motion / 粒子運動 / Classification Performance / Wet-Type Classification / 分級性能 / スチュワ-トソン層 / 超高度分離 / 粉粒体操作 / 流体機械 / Axisvm metric Flow / Ttriple-product Classification / Stewatson Layer / Double-stage Classification / スチュワートン層 / 軸対象流 / 2段分級 / 二段分級 / Source-Sink Flow / Multi-phase Flow / ソース・シンク流れ / 混相流 / Particle Dispersion / 粒子運道 / 粒子分散 / Continuous Classification / Interior Region / Ekman Layr / Stewartson Layr / 連続分級 / 内部領域 … More Except Principal Investigator 分級性能 / GRAVITATIONAL EFFECT PARAMETER / CENTRIFUGAL EFFECT PARAMETER / SCALING LAW / FRACTIONALE EFFICIENCY / ROSSBY NUMBER / EKMAN NUMBER / EFFECT OF TRUE SPECIFIC GRAVITY / SMALL PARTICLE CLASSIFICATION / 収率 / 粒子特性と分級 / 重力効果パラメータ / 重心効果パラメータ / 遠心効果パラメータ / スケール則 / ロスビー数 / エックマン数 / 真比重の影響 / 微粒子分級 / Partial Classification Efficiency / Particle Motion / Interior Region / Ekman Layr / Stewartson Layr / Almost Rigidly Rotating Flow / Submicron Particle / Classification / せん断層 / サブミクロン微粒子分級 / ステワートソン層 / 部分分級効率 / 粒子運動 / 内部領域 / エクマン層 / ステワ-トソン層 / 準剛体回転成層流 / サブミクロン粒子 / 分級 Less

層流の高遠心力場を用いた微粉体の多品種少処理量向き高精度・多産物分級機の確立Principal Investigator
- Principal Investigator
  
  土田陽一
- Project Period (FY)
  2016 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
PURSUIT OF IMPROVING THE EFFICIENCY OF AN ACCURATE SUBMICRON-CLASSIFICATION SYSTEM USING ALMOST RIGIDLY ROTATING FLOW FOR PRACTICAL APPLICATIONPrincipal Investigator
- Principal Investigator
  
  TSUGHIDA Yoighi
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
Development of anAccurate High-throughput Multiple-product Submicron Classification System using an Almost Rigidly Rotating FlowPrincipal Investigator
- Principal Investigator
  
  TSUCHIDA Yoichi
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
STUDY ON ACCURATE-HIGH SPEED POWDER CLASSIFICATION SYSTEM CONSIDERING PARTICLE CHARACTERISTICS
- Principal Investigator
  
  NAKABAYASHI Koichi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  AICHI UNIVERSITY OF TECHNOLOGY
Study on a New System of Multi-stage Classification using an Almost Rigidly Rotating FlowPrincipal Investigator
- Principal Investigator
  
  TSUCHIDA Yoichi
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
Study on the Control of the Motion of Fine Particles in an Almost Rigidly Rotating FlowPrincipal Investigator
- Principal Investigator
  
  TSUCHIDA Yoichi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
Basic Research of a New System of Accurate Wet-Type Submicron ClassificationPrincipal Investigator
- Principal Investigator
  
  TSUCHIDA Yoichi
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
Basic Research of a New Classification System using an Almost Rigidly Rotating FlowPrincipal Investigator
- Principal Investigator
  
  TSUCHIDA Yoichi
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology
Developmental study of a new technique to classify submicron particles
- Principal Investigator
  
  NAKABAYASHI Koichi
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya Institute of Technology

All 2018 2017 2016 2012 2011 2010 2009 2008 2007 2006 2005 2004

All Journal Article Presentation

[Journal Article]2009
- Author(s)
  土田陽一(分担執筆)
- Journal Title
  
  サブミクロン・ナノレベルの粉砕・分散技術とプロセスの向上 (第4章高精度分級実現のために第3節準剛体回転流を用いた湿式分級方式)(情報機構)
  
  Pages: 273-289
- Data Source
  KAKENHI-PROJECT-21560170
[Journal Article] Extension to a Multiple-product Type of a High-throughput Centrifugal Classification System Using an Almost Rigidly Rotating Flow(in Japanese)2007
- Author(s)
  Yoichi, TSUCHIDA, Koichi, NAKABAYASHI, Takayuki, SUZUKI, Tomohito, SUZUKI
- Journal Title
  
  Journal of Powder Technology, Japan Vol.44, No.7
  
  Pages: 523-537
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] 準剛体回転流を用いた高処理量型遠心分級方式の高精度化2007
- Author(s)
  土田陽一
- Journal Title
  
  粉体工学会誌 44
  
  Pages: 507-522
- NAID
  10019510503
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] 準剛体回転流を用いた高処理量型遠心分級方式の多産物化2007
- Author(s)
  土田陽一
- Journal Title
  
  粉体工学会誌 44
  
  Pages: 523-537
- NAID
  10019510510
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] Extension to Accurate Types of a High-throughput Centrifugal Classification System Using an Almost Rigidly Rotating. Flow(in Japanese)2007
- Author(s)
  Yoichi, TSUCHIDA, Koichi, NAKABAYASHI, Takayuki, SUZUKI, Tomohito, SUZUKI
- Journal Title
  
  Journal of Powder Technology, Japan Vol.44, No.7
  
  Pages: 507-522
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] New Accurate and Multiple- product Classifiers of a High-throughput Centrifugal Classification by Almost Rigidly Rotating Flow2006
- Author(s)
  Yoichi TSUCHIDA
- Journal Title
  
  Proceedings of the World Congress on Particle Technology 5 (CD-ROM)
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] 準剛体回転流を用いた単段分級装置の高精度・高処理量化に関する研究2006
- Author(s)
  土田陽一
- Journal Title
  
  2006年度秋期研究発表会講演論文集
  
  Pages: 95-96
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] 準剛体回転流を用いたバッチ式2段分級方式における分級性能の考察2006
- Author(s)
  土田陽一
- Journal Title
  
  2006年度秋期研究発表会講演論文集
  
  Pages: 99-100
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] 準剛体回転流を用いた三産物分級機設計のための性能予測 -分級場の形状と流量が分級性能に及ぼす影響-2006
- Author(s)
  土田陽一
- Journal Title
  
  2006年度秋期研究発表会講演論文集
  
  Pages: 97-98
- Data Source
  KAKENHI-PROJECT-18560164
[Journal Article] New Accurate Wet-type Centrifugal Classification System with High Throughput by Almost Rigidly Rotating Flow2005
- Author(s)
  Yoichi Tsuchida
- Journal Title
  
  7th World Congress of Chemical Engineering, Glasgow, Scotland
  
  Pages: 10-10
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560156
[Journal Article] エクマン層とスチュワートソン層における微粒子軌道の統計的研究2005
- Author(s)
  中林功一, 土田陽一, 中牟礼賢治
- Journal Title
  
  日本機械学会東海支部第54期総会講演会論文集 No.053-1
  
  Pages: 2-2
- Data Source
  KAKENHI-PROJECT-15560156
[Journal Article] 準剛体回転流による微粒子分級における重力の影響2005
- Author(s)
  中林功一, 土田陽一, 永井久一, 村澤永治
- Journal Title
  
  日本機械学会東海支部第54期総会講演会論文集 No.053-1
  
  Pages: 2-2
- Data Source
  KAKENHI-PROJECT-15560156
[Journal Article] New Accurate Wet-type Centrifugal Classification System with High Throughput by Almost Rigidly Rotating Flow2005
- Author(s)
  Y.Tsuchida, K.Nakabayashi
- Journal Title
  
  7th World Congress of Chemical Engineering, Glasgow, Scotland
- Data Source
  KAKENHI-PROJECT-15560156
[Journal Article] 準剛体回転流を用いた遠心分級方式における高処理量化の試み2004
- Author(s)
  土田陽一, 中林功一, 森西洋平, 鈴木智人
- Journal Title
  
  粉体工学会2004年度秋期研究発表会講演論文集
  
  Pages: 111-112
- NAID
  10016690813
- Data Source
  KAKENHI-PROJECT-15560156
[Journal Article] 準剛体回転流を用いた遠心分級方式における高処理量化の試み2004
- Author(s)
  土田陽一
- Journal Title
  
  粉体工学会2004年度秋期研究発表会講演論文集
  
  Pages: 111-112
- NAID
  10016690813
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560156
[Journal Article] 準剛体回転流を用いた分級方式のスケール側の一考察2004
- Author(s)
  中林功一, 土田陽一, 永井久一, 村澤永治
- Journal Title
  
  粉体工学会2004年度秋期研究発表会講演論文集
  
  Pages: 113-114
- Data Source
  KAKENHI-PROJECT-15560156
[Presentation] 湿式遠心分級方式における多産物化・連続処理化に関する数値的研究2018
- Author(s)
  土田　陽一，松岡　裕也
- Organizer
  日本機械学会東海支部第67期総会・講演会
- Data Source
  KAKENHI-PROJECT-16K06075
[Presentation] バッチ式三産物分級機の性能の実験的評価2018
- Author(s)
  土田　陽一，杉浦　史剛
- Organizer
  日本機械学会東海支部第67期総会・講演会
- Data Source
  KAKENHI-PROJECT-16K06075
[Presentation] 遠心分級方式における分級産物と性能評価法の見直し(実験的考察)2017
- Author(s)
  土田　陽一，杉浦　史剛
- Organizer
  日本機械学会東海支部第66期総会・講演会
- Place of Presentation
  静岡大学（静岡県浜松市）
- Year and Date
  2017-03-14
- Data Source
  KAKENHI-PROJECT-16K06075
[Presentation] 遠心分級方式における分級産物と性能評価の見直し（数値的考察）2017
- Author(s)
  土田　陽一，松岡　裕也
- Organizer
  日本機械学会東海支部第66期総会・講演会
- Place of Presentation
  静岡大学（静岡県浜松市）
- Year and Date
  2017-03-14
- Data Source
  KAKENHI-PROJECT-16K06075
[Presentation] スチュワートソン層を用いた微粒子分級方式の性能の実験的評価2016
- Author(s)
  土田　陽一，松岡　裕也，杉浦　史剛
- Organizer
  日本流体力学会年会2016
- Place of Presentation
  名古屋工業大学（名古屋市昭和区）
- Year and Date
  2016-09-26
- Data Source
  KAKENHI-PROJECT-16K06075
[Presentation] 準剛体回転流を用いた分級方式における高処理量化のための粉体の供給方法の実験的考察2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式における壁形状によるスチュワートソン層流れの制御2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集No.123-1(2頁)
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた高処理量型の単段分級方式の開発2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集No.123-1(2頁)
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式における壁形状によるスチュワートソン層流れの制御2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた分級方式における高処理量化のための粉体の供給方法の実験的考察2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集No.123-1(2頁)
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた高処理量型の単段分級方式の開発2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた高精度分級方式の高処理量化に関する研究2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集No.123-1(2頁)
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた高精度分級方式の高処理量化に関する研究2012
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第61期総会講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の分級性能に関するスケール則の数値的考察2011
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第60期総会講演会講演論文集No.113-1(2頁)
- Place of Presentation
  豊橋技術科学大学(愛知県)
- Year and Date
  2011-03-14
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段遠心分級方式における高流量化・高濃度化に伴う性能変化の実験的考察2011
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第60期総会講演会講演論文集No.113-1(2頁)
- Place of Presentation
  豊橋技術科学大学(愛知県)
- Year and Date
  2011-03-14
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Improvement in Performance of a New Accurate High-throughput Triple-product Classifi-cation System using Almost Rigidly Rotating Flow2010
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  World Congress on Particle Technology(WCPT6 2010)
- Place of Presentation
  Nurenberg Messe, Nurenberg, Germany
- Year and Date
  2010-04-28
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Improvement in Performance of a New Accurate High-throughput Triple-product Classification System using Almost Rigidly Rotating Flow2010
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  World Congress on Particle Technology (WCPT6 2010)(4頁)
- Place of Presentation
  Nurenberg Messe Nurenberg, Germany
- Year and Date
  2010-04-28
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の中間粉産物に関するスケール側の数値的考察2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会, 2010年度年次大会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の性能におけるスケール則の特徴2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第59期総会講演会
- Place of Presentation
  名城大学 (愛知県)
- Year and Date
  2010-03-09
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段遠心分級方式における高流量化・高濃度化に伴う性能変化の実験的考察2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会, 2010年度年次大会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の中間粉産物に関するスケール側の数値的考察2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会2010年度年次大会講演論文集(2頁)
- Place of Presentation
  名古屋工業大学(愛知県)
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Scaling Law in Performance of a New Accurate High-throughput Triple-product Classifica-tion System using Almost Rigidly Rotating Flow2010
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  World Congress on Particle Technology(WCPT6 2010)
- Place of Presentation
  Nurenberg Messe, Nurenberg, Germany.
- Year and Date
  2010-04-27
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の分級性能に関するスケール則の数値的考察2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会, 2010年度年次大会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Scaling Law in Performance of a New Accurate High-throughput Triple-product Classification System using Almost Rigidly Rotating Flow2010
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  World Congress on Particle Technology (WCPT6 2010)(4頁)
- Place of Presentation
  Nurenberg Messe Nurenberg, Germany
- Year and Date
  2010-04-27
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段遠心分級方式における高流量化と高濃度化の併用に伴う精度変化の実験的考察2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会2010年度年次大会講演論文集(2頁)
- Place of Presentation
  名古屋工業大学(愛知県)
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段遠心分級方式における高流量化と高濃度化の併用に伴う精度変化の実験的考察2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会, 2010年度年次大会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段分級方式による分級径・精度の変化と分級条件の関係2010
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第59期総会講演会
- Place of Presentation
  名城大学 (愛知県)
- Year and Date
  2010-03-09
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Numerical Performance-Estimation of an Accurate Centrifugal Triple-Product Classifier. 1. Improvement of Yield by Controlling Flow-rate Distribution2009
- Author(s)
  土田陽一
- Organizer
  The Fourth Asian Technology Symposium (APT 2009)
- Place of Presentation
  Hotel Samrat, New Delhi, India
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Numerical Performance-Estimation of an Accurate Centrifugal Triple-Product Classifier. 2. Improvement of Accuracy by Controlling Flow-rate Distribution2009
- Author(s)
  土田陽一
- Organizer
  The Fourth Asian Technology Symposium (APT 2009)
- Place of Presentation
  Hotel Samrat, New Delhi, India
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段分級方式における高流量化による高処理量化の実験的研究2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会 87期流体工学部門講演会
- Place of Presentation
  名古屋工業大学 (愛知県)
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の性能におけるスケール則の特徴2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会87期流体工学部門講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段分級方式による分級径・精度の変化と分級条件の関係2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会87期流体工学部門講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた微粒子分級方式における流れおよび粒子運動の理論的・数値的研究2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会 87期流体工学部門講演会
- Place of Presentation
  名古屋工業大学 (愛知県)
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式における分級機形状と流量配分の制御による分級性能の高性能化2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会 87期流体工学部門講演会
- Place of Presentation
  名古屋工業大学 (愛知県)
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段分級方式における高濃度処理時の分級条件の最適化2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会 87期流体工学部門講演会
- Place of Presentation
  名古屋工業大学 (愛知県)
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段分級方式における高濃度処理時の分級条件の最適化2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会87期流体工学部門講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Numerical Performance-Estimation of an Accurate Centrifugal Triple-Product Classifier. 1. Improve-ment of Yield by Controlling Flow-rate Distribution2009
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  The Fourth Asian Technology Symposium(APT 2009)
- Place of Presentation
  Hotel Samrat, New Delhi, India
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式における分級機形状と流量配分の制御による分級性能の高性能化2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会87期流体工学部門講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] Numerical Performance-Estimation of an Accurate Centrifugal Triple-Product Classifier. 2. Improve-ment of Accuracy by Controlling Flow-rate Distribution2009
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  The Fourth Asian Technology Symposium(APT 2009)
- Place of Presentation
  Hotel Samrat, New Delhi, India
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた単段分級方式における高流量化による高処理量化の実験的研究2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会87期流体工学部門講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた微粒子分級方式における流れおよび粒子運動の理論的・数値的研究2009
- Author(s)
  土田陽一
- Organizer
  日本機械学会87期流体工学部門講演会講演論文集
- Place of Presentation
  名古屋工業大学
- Year and Date
  2009-11-08
- Data Source
  KAKENHI-PROJECT-21560170
[Presentation] 準剛体回転流を用いた三産物分級方式の性能に及ぼす流れ及び粒子条件の影響2008
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第57期総会講演会講演論文集 No.083-1(2頁)
- Place of Presentation
  名古屋市名古屋大学
- Year and Date
  2008-03-10
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた三産物分級方式の性能に及ぼす分級機形状の影響2008
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第57期総会講演会講演論文集 No.083-1(2頁)
- Place of Presentation
  名古屋市名古屋大学
- Year and Date
  2008-03-10
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Influence of the Shape of Classifier on the Performance of a Triple-product Classification using an Almost Rigidly Rotating Flow(in Japanese)2008
- Author(s)
  Yoichi, TSUCHIDA, Mikitaka, SABA, Akira, HIROSE
- Organizer
  57-th General Lercture Meeting of Japan Society of Mechanical Engineers, Tokai Branch
- Place of Presentation
  Nagoya University, Nagoya
- Year and Date
  2008-03-10
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Influence of Flow and Particle Conditions on the Performance of a Triple. product Classification using an Almost Rigidly Rotating Flow(in Japanese)2008
- Author(s)
  Yoichi, TSUCHIDA, Mikitaka, SABA
- Organizer
  57-th General Lercture Meeting of Japan Society of Mechanical Engineers, Tokai Branch
- Place of Presentation
  Nagoya University, Nagoya
- Year and Date
  2008-03-10
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] The Scaling Law in a Double-stage Classification Using an Almost Rigidly Rotating Flow(in Japanese)2008
- Author(s)
  Yoichi, TSUCHIDA, Yuki, AMANO, Isamu, MURAMATSU
- Organizer
  57-th General Lercture Meeting of Japan Society of Mechanical Engineers, Tokai Branch
- Place of Presentation
  Nagoya University, Nagoya
- Year and Date
  2008-03-10
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた2段分級方式におけるスケール則2008
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第57期総会講演会講演論文集 No.083-1(2頁)
- Place of Presentation
  名古屋市名古屋大学
- Year and Date
  2008-03-10
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた高精度湿式遠心分級方式の開発2007
- Author(s)
  土田陽一
- Organizer
  化学工学会粒子・流体プロセス部会粉体分科会プロセス分科会「分離技術・環境技術の最前線」要旨集(17頁)
- Place of Presentation
  東京都アルカディア市ケ谷
- Year and Date
  2007-11-27
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた三産物分級方式の性能に及ぼす流れ及び粒子条件の影響2007
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第57期総会講演会講演論文集(No.083-1, 2頁)
- Place of Presentation
  名古屋市名古屋大学
- Year and Date
  2007-03-10
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Development of an Accurate Wet-type Centrifugal Classification System System Using an Almost Rigidly Rotating Flow(in Japanese)2007
- Author(s)
  Yoichi, TSUCHIDA
- Organizer
  Fluid-Particle-Process Sectional-Meeting of Society of Chemical Engineers, Japan
- Place of Presentation
  Arcadia Ichigaya, Tokyo
- Year and Date
  2007-11-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Prediction of Performance for the Design of a Triple-product Classifier Using an Almost Rigidly Rotating Flow-Relationship Among Cut Size, Marginal Streamlines and Marginal Paretide Trajectories(in Japanese)2007
- Author(s)
  Yoichi, TSUCHIDA, Mikitaka, SABA
- Organizer
  2007 Spring-term Lecture Meeting of Society of Powder Technology, Japan
- Place of Presentation
  Sohyo Kaikan, Tokyo
- Year and Date
  2007-05-23
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた三産物分級機の性能予測-分級径と限界流線、限界粒子軌道の関係-2007
- Author(s)
  土田陽一
- Organizer
  粉体工学会2007年度春期研究発表会講演論文集(2頁)
- Place of Presentation
  東京都総評会館
- Year and Date
  2007-05-23
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた三産物分級方式の性能に及ぼす分級機形状の影響2007
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第57期総会講演会講演論文集(No.083-1, 2頁)
- Place of Presentation
  名古屋市名古屋大学
- Year and Date
  2007-03-10
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた連続式2段分級方式め実験的研究2007
- Author(s)
  土田陽一
- Organizer
  粉体工学会2007年度春期研究発表会講演論文集(2頁)
- Place of Presentation
  東京都総評会館
- Year and Date
  2007-05-23
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた三産物分級機の性能予測-分級径と限界流線・限界粒子軌道の関係-2007
- Author(s)
  土田陽一
- Organizer
  粉体工学会 2007年度春期研究発表会講演論文集(2頁)
- Place of Presentation
  東京都総評会館
- Year and Date
  2007-05-23
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた2段分級方式におけるスケール則2007
- Author(s)
  土田陽一
- Organizer
  日本機械学会東海支部第57期総会講演会講演論文集(No.083-1, 2頁)
- Place of Presentation
  名古屋市名古屋大学
- Year and Date
  2007-03-10
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた高精度湿式遠心分級方式の開発2007
- Author(s)
  土田陽一
- Organizer
  化学工学会粒子・流体プロセス部会粉体分科会プロセス分科会「分離技術、環境技術の最前線」要旨集(17頁)
- Place of Presentation
  東京都アルカディア市ヶ谷
- Year and Date
  2007-11-27
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Experimental Study on a Continuous Double-stage Classification System Using an Almost Rigidly Rotating Flow(in Japanese)2007
- Author(s)
  Yoichi, TSUCHIDA, Isamu, MURAMATSU, Yuki, AMANO
- Organizer
  2007 Spring-term Lecture Meeting of Society of Powder Technology, Japan
- Place of Presentation
  Sohyo Kaikan, Tokyo
- Year and Date
  2007-05-23
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた連続式2段分級方式の実験的研究2007
- Author(s)
  土田陽一
- Organizer
  粉体工学会 2007年度春期研究発表会講演論文集(2頁)
- Place of Presentation
  東京都総評会館
- Year and Date
  2007-05-23
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] New Accurate and Multiple-product Classifiers of a High-throughput Centrifugal Classification by Almost Rigidly Rotating Flow2006
- Author(s)
  Yoichi, TSUCHIDA, Koichi, NAKABAYASHI, Takayuki, SUZUKI
- Organizer
  World Congress on Particle Technology 5
- Place of Presentation
  Orland, Florida USA
- Year and Date
  2006-04-24
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Study on High Accuracy and Throughput of a Single-stage Classifier Using an Almost Rigidly Rotating Flow(in Japanese)2006
- Author(s)
  Yoichi, TSUCHIDA, Takeshi, Ouchi
- Organizer
  2006 Autumn-term Lecture Meeting of Society of Powder Technology Japan
- Place of Presentation
  Makuhari Messe, Chiba
- Year and Date
  2006-11-07
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いたバッチ式2段分級方式における分級性能の考察2006
- Author(s)
  土田陽一
- Organizer
  粉体工学会 2006年度秋期研究発表会講演論文集(2頁)
- Place of Presentation
  千葉県幕張メッセ国際会議場
- Year and Date
  2006-11-07
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた三産物分級機設計のための性能予測 -分級場の形状と流量が分級性能に及ぼす影響-2006
- Author(s)
  土田陽一
- Organizer
  粉体工学会 2006年度秋期研究発表会講演論文集(2頁)
- Place of Presentation
  千葉県幕張メッセ国際会議場
- Year and Date
  2006-11-07
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Considerations of the Classification Performance of a Batch-type Double-stage Classification System Using an Almost Rigidly Rotating Flow(in Japanese)2006
- Author(s)
  Yoichi, TSUCHIDA, Koichi, NAKABAYASHI, Yohei, MORINISHI, Hidehumi, HUNAHASHI, Isamu, MURAMATSU
- Organizer
  2006 Autumn-term Lecture Meeting of Society of Powder Technology, Japan
- Place of Presentation
  Makuhari Messe, Chiba
- Year and Date
  2006-11-07
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] Prediction of Performance for the Design of a Triple-product Classifier Using an Almost Rigidly Rotating Flow-Influence of the Classifier Shape and Flow Rate on Classification Performance-(in Japanese)2006
- Author(s)
  Yoichi, TSUCHIDA, Mikitaka, SABA
- Organizer
  2006 Autumn-term Lecture Meeting of Society of Powder Technology, Japan
- Place of Presentation
  Makuhari Messe, Chiba
- Year and Date
  2006-11-07
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] 準剛体回転流を用いた単段分級装置の高精度・高処理量化に関する研究2006
- Author(s)
  土田陽一
- Organizer
  粉体工学会 2006年度秋期研究発表会講演論文集(2頁)
- Place of Presentation
  千葉県幕張メッセ国際会議場
- Year and Date
  2006-11-07
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164
[Presentation] New Accurate and Multiple-product Classifiers of a High-throughput Centrifugal Classification by Almost Rigidly Rotating Flow2006
- Author(s)
  Yoichi TSUCHIDA
- Organizer
  Proceedings of the World Congress on Particle Technology 5
- Place of Presentation
  Orlando, Florida USA
- Year and Date
  2006-04-24
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560164

1. NAKABAYASHI Koichi (90024231)

# of Collaborated Projects: 4 results

# of Collaborated Products: 5 results
2. MORINISHI Youhei (40222351)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. KAIDO Takuya

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. HASHIGUCHI Toru

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. NOTSU Yutaro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. NAKAGAKI Toru

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. HIRANO Kyohei

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. YOSHIDA Shintaro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. SHOJI Koichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. HIROSE Akira

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. SUKENARI Yuji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. MUKAE Masato

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. SUZUKI Yoshihiro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. SUGIYAMA Atsushi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. 若林稔

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

TSUGHIDA Yoighi 土田 陽一

TSUCHIDA Yoichi 土田 陽一

Research Projects

Research Products

Co-Researchers

層流の高遠心力場を用いた微粉体の多品種少処理量向き高精度・多産物分級機の確立Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

PURSUIT OF IMPROVING THE EFFICIENCY OF AN ACCURATE SUBMICRON-CLASSIFICATION SYSTEM USING ALMOST RIGIDLY ROTATING FLOW FOR PRACTICAL APPLICATIONPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of anAccurate High-throughput Multiple-product Submicron Classification System using an Almost Rigidly Rotating FlowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STUDY ON ACCURATE-HIGH SPEED POWDER CLASSIFICATION SYSTEM CONSIDERING PARTICLE CHARACTERISTICS

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on a New System of Multi-stage Classification using an Almost Rigidly Rotating FlowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the Control of the Motion of Fine Particles in an Almost Rigidly Rotating FlowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Basic Research of a New System of Accurate Wet-Type Submicron ClassificationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Basic Research of a New Classification System using an Almost Rigidly Rotating FlowPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Developmental study of a new technique to classify submicron particles

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article]2009

Author(s)

Journal Title

Data Source

[Journal Article] Extension to a Multiple-product Type of a High-throughput Centrifugal Classification System Using an Almost Rigidly Rotating Flow(in Japanese)2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] 準剛体回転流を用いた高処理量型遠心分級方式の高精度化2007

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] 準剛体回転流を用いた高処理量型遠心分級方式の多産物化2007

Author(s)

Journal Title

NAID

Description

Data Source

TSUGHIDA Yoighi 土田陽一

TSUCHIDA Yoichi 土田陽一