MIYACHIKA Kouitsu 宮近幸逸

… Alternative Names

宮隆幸逸ミヤチカコウイツ

Less

Researcher Number	30157664
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2011 – 2013: 鳥取大学, 工学(系)研究科(研究院), 教授 2009: Tottori University, 大学院・工学研究科, 教授 2008 – 2009: Tottori University, 工学研究科, 教授 2007: Tottori University, 工学部, 教授 2000: 鳥取大学, 工学部, 教授 1990 – 1999: Faculty of Eng., Tottori Univ., Assoc. Prof., 工学部, 助教授 1986 – 1989: 鳥取大学, 工学部, 講師
Review Section/Research Field	Principal Investigator 設計工学・機械要素・トライボロジー / Design engineering/Machine functional elements/Tribology Except Principal Investigator 機械要素 / 設計工学・機械要素・トライボロジー
Keywords	Principal Investigator 残留応力 / 歯車 / FEM / Gear / 硬化層 / 曲げ疲労強度 / 熱処理 / 機械要素 / Hardened Layer / Residual Stress … More / Induced Current Density / Shaft / Induction Hardening / Heating Coil / 誘導電流密度 / 軸 / 加熱コイル / 高周波焼入れ / Frequency Analysis / Crack Length / AE Cumulative Energy Count / AE Cumulative Event Count / Bending Fatigue Failure / Gear Failure / Acoustic Emission / 周波数分折 / 周波数分析 / き裂長さ / AEエネルギー総数 / AE事象計数総数 / 曲げ疲労損傷 / 歯車損傷 / アコースティック・エミッション / 薄肉 / 小形・軽量化 / リム・ウェブ厚さ / かみ合い率 / ねじれ角 / 薄肉構造 / 歯元応力 / はすば歯車 / シミュレーション / 最適化 … More Except Principal Investigator Gear / 歯車 / 曲げ疲労強度 / Bending Fatigue Strength / Wear / 摩耗 / Vacuum / 真空 / 浸炭焼入れ / ショットピーニング / FEM / Efficiency / 効率 / Elastic-Plastic Stress Analysis / Heat Conduction Analysis / Electromagnetic Field Analysis / Residual Stress / Induction Hardening / 歯面強度 / 弾塑性応力解析 / 熱伝導解析 / 電磁界解析 / 残留応力 / 高周波焼入れ / Low Temperature / Solid Film Lubrication / Friction / プラスチック / 低温 / 固体潤滑膜 / 摩擦 / Coefficient of Friction / Impact Strength / 硬化層厚さ / 侵炭焼入れ / 温度 / 摩擦係数 / 衝撃強度 / Shot Peening / Vacuum Carburizing / Gas Carburizing / Intergranular Oxidation / Case-Hardening / サブゼロ処理 / ショットブラスト / 真空浸炭 / ガス浸炭 / 粒界酸化 / Voltage / Pitting / Fatigue Life / Surface Roughness / Roller / Contact Stress / Electric Wear / 磨耗 / 面圧疲労寿命 / 表面あらさ / 面圧強度 / 電流 / 電圧 / ピッチング / 疲労寿命 / 表面粗さ / ローラ / 接触応力 / 電食 / Miner's Hypothesis / Load Variation / Tufftriding / Ion-Nitriding / Shot-Peening / Sintered Metal / Fatigue Strength / ずぶ焼入れ / 密度 / 焼結温度 / 調質 / マイナ-の仮説 / 荷重変動 / 軟窒化 / イオン窒化 / 焼結金属 / 疲労強度 / Electric Current Density / 誘導電流密度 / Plastic / Surface Durability / 歯車強度 Less

Bending Strength Design of Thin-Rimmed Helical Gears with Various Web ArrangementsPrincipal Investigator
- Principal Investigator
  
  MIYACHIKA Kouitsu
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Tottori University
Optimization of Gear Strength Using Heat Treatment SimulationPrincipal Investigator
- Principal Investigator
  
  MIYACHIKA Kouitsu
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Tottori University
Fundamental Study on Electric Wear of Machine Elements by means of Rollers
- Principal Investigator
  
  KOIDE Takao
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Tottori University
Study on Optimum Coil Design and Hardening Condition for Gear Induction HardeningPrincipal Investigator
- Principal Investigator
  
  MIYACHIKA Kouitsu
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Tottori University
Study on Residual Stress and Optimum Hardening Condition of Induction Hardened Gears
- Principal Investigator
  
  ODA Satoshi
- Project Period (FY)
  1994 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Tottori University
Study on Mechanism of Bending Ftigue Breakage and Strengthening Method of Gear Teeth
- Principal Investigator
  
  ODA Satoshi
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Tottori University
Study on Prediction and Monitoring Technique of Failure of Gear Teeth by Means of AE MethodPrincipal Investigator
- Principal Investigator
  
  MIYACHIKA Kouitsu
- Project Period (FY)
  1993 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Tottori University
Study on Performance and Mechanism of Breakage of Solid Film Lubricants Lubricants of Gears
- Principal Investigator
  
  KOIDE Takao
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Tottori University
Evaluation of Performance and Development of Surface Treatment Method of Gears for Space Application
- Principal Investigator
  
  ODA Satoshi
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械要素
- Research Institution
  Tottori University
Study on Residual Stress and Load Bearing Capacity of Induction Hardened Gears
- Principal Investigator
  
  ODA Satoshi
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Tottori University
Study on Load Bearing Capacity of Gears in Special Environment
- Principal Investigator
  
  ODA Satoshi
- Project Period (FY)
  1988 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Tottori University
Study on Effect of Intergranular Oxidation on the Bending Fatigue Strength of Case-Hardened Gears
- Principal Investigator
  
  ODA Satoshi
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Tottori University

All 2014 2013 2012 2011 2010 2009 2008 2007

All Journal Article Presentation

[Journal Article] Effects of Helix Angle on Root Stresses of Thin-Rimmed Helical Gears with Various Web Arrangements2013
- Author(s)
  Kouitsu Miyachika and Daing Mohamad Nafiz Daing Idris
- Journal Title
  
  Proc. of ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
  
  Volume: Vol.1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Root Stress and Bending Fatigue Strength of Thin-Rimmed Helical Gears with Web Arrangement2013
- Author(s)
  Kouitsu MIYACHIKA, Daing Mohamad Nafiz Daing Idris, Satoshi ODA and Kazuaki Ando
- Journal Title
  
  International Conference on Gears VDI-Berichite 2119
  
  Volume: Vol.1 Pages: 609-620
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Effects of Helix Angle on Root Stresses of Thin- Rimmed Helical Gears with Various Web Arrangements2013
- Author(s)
  Kouitsu Miyachika and Daing Moha- mad Nafiz Bin Daing Idris
- Journal Title
  
  Proc. of ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Con- ference
  
  Volume: DETC2013- 12853(on CD- ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Root Stress and Bending Fatigue Strength of Thin- Rimmed Helical Gears with Web Arrangement2013
- Author(s)
  Kouitsu Miyachika, Daing Mohamad Nafiz Bin Daing Idris, S. Oda and Kazuaki Ando
- Journal Title
  
  International Confer- ence on Gears VDI-Berichite 2119
  
  Volume: vol.1 Pages: 609-620
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] 薄肉はすば歯車の歯元応力に及ぼすリム・ウェブ厚さの影響2012
- Author(s)
  宮近幸逸,Daing Mohamad Nafiz Bin daing Idris,小出隆夫,Imaduddin Hermi Bin Wan Nordin,安藤和彰
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 第77巻,775号 Pages: 597-603
- NAID
  130000873770
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012
- Author(s)
  Kouitsu Miyachika, Daing Mohamad Nafiz Daing Idris and Takao Koide
- Journal Title
  
  Proc. of The 2nd Asian Conference on Mechanism and Machine Science (ASIAN-MMS2012)
  
  Volume: Vol.1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Effects of Rim and Web Thicknesses on Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012
- Author(s)
  Daing Mohamad Nafiz Bin Daing Idris, Kouitsu Miyachika and Takao Koide
- Journal Title
  
  Proc. of the 4th Joint Symposium Mechanical and Materials Engineering between Northeastern University, Dalian Uni- versity and Tottori University
  
  Pages: 113-119
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Effects of Rim and Web Thicknesses on Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012
- Author(s)
  Daing Mohamad Nafiz Daing Idris, Kouitsu Miyachika and Takao Koide
- Journal Title
  
  Proc. of The 4th Joint Symposium on Mechanical and Materials Engineering between Northeastern University, Dalian University of Technology and Tottori University
  
  Volume: Vol.1 Pages: 113-119
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012
- Author(s)
  Kouitsu Miyachika, Daing Mohamad Nafiz Bin Daing Idris
- Journal Title
  
  Proc. of The 2nd Asian Conference and Mechanisms and Machine Science (ASIAN-NMS2012)
  
  Volume: ID119(on CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Root Stressses of Thin-Rimmed Helical Gears with Asymmetric Web Arrange- ment2011
- Author(s)
  Daing Mohamad Nafiz Bin Daing Idris, Kouitsu Miyachika, Imaduddin Hermi Bin Wan Nordin and Takao Koide
- Journal Title
  
  Proc. of 4th International Con- ference on Manufacturing, Machine Design and Tribology
  
  Volume: No.28 Pages: 23-24
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] 薄肉はすば歯車の歯元応力に及ぼすリム・ウェブ厚さの影響2011
- Author(s)
  宮近幸逸，Daing Mohamad Nafiz Bin Daing Idris，小出隆夫，Imaduddin Helmi Bin WanNordin，安藤和彰
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 第77巻775号 Pages: 597-603
- NAID
  130000873770
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Root Stresses of Thin-Rimmed Helical Gears with Asymmetric Web Arrangement,2011
- Author(s)
  Daing Mohamad Nafiz Daing Idris, Kouitsu Miyachika, Imaduddin Hermi Bin Wan Nordin and Takao Koide
- Journal Title
  
  Proc. of 4th International Conference on Manufacturing, Machine Design and Tribology,
  
  Volume: No.28 Pages: 23-24
- Data Source
  KAKENHI-PROJECT-23560161
[Journal Article] Effects of Roller Configuration on Residual Stresses of Rollers Due to Case-Carburizing2009
- Author(s)
  Kouitsu Miyachika, Wei-Dong Xue, Shuji Sawada, Hidefumi Mada
- Journal Title
  
  Proceedings of The 17th IFHTSE Congress Vol.49,Vol.1
  
  Pages: 129-132
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Roller Configuration on Residual Stresses of Rollers Due to Case-Carburizing2009
- Author(s)
  Kouitsu Miyachika, Wei-Dong Xue, Shuji Sawada, Hidefumi Mada
- Journal Title
  
  Proceedings of The 17^<th> IFHTSE Congress, NETSU SHORI Vol.49 Special Issue Vol.1
  
  Pages: 129-132
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Case Depth, Side-Face Carburizing and Helix Angle on Residual Stress and Bending Fatigue Strength of Case-Carburized Helical Gears2009
- Author(s)
  Kouitsu Miyachika, Kazuaki Ando, Wei-Dong Xue, Imaduddin Helmi Bin Wan Nordin
- Journal Title
  
  Proc. of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2009 (CD-ROM)
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Hardened Layer and Bending Fatigue Strength of Induction Hardened Thermally Refined Steel Gears2009
- Author(s)
  Kouitsu Miyachika, Hideaki KATANUMA, Jun IWANAGA, Hidefumi MADA
- Journal Title
  
  JSME Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.3,No.2
  
  Pages: 136-145
- NAID
  130000127770
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Case Depth, Side-Face Carburizing and Helix Angle on Residual Stress and Bending Fatigue Strength of Case-Carburized Helical Gears2009
- Author(s)
  Kouitsu MIYACHIKA, Kazuaki ANDO, Wei-Dong XUE, Imaduddin Helmi Bin Wan Nordin
- Journal Title
  
  Proc. of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2009 (DETC2009/PTG-87313 on CD-RO)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Carburized Part, Case Depth and Helix Angle on Bending fatigue Strength of Case-Carburized Helical Gears2009
- Author(s)
  Kouitsu Miyachika, Kazuaki Ando, Takao Koide, Hidefumi Mada, Hideaki Katanuma, Kengo Nojima, Satoshi Oda
- Journal Title
  
  Proceedings of The JSME International Conference on Motion and Power Transmissions
  
  Pages: 338-343
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Residual Stresses of Spur Internal Gears Due to Case-Carburizing2009
- Author(s)
  Kouitsu MIYACHIKA, Wei-Dong Xue
- Journal Title
  
  Proc. of The Forth Asian Conference on Heat Treatment and Surface Engineering
  
  Pages: 350-355
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Residual Stresses of Spur Internal Gears Due to Case-Carburizing2009
- Author(s)
  Kouitsu Miyachika, Wei-Dong Xue
- Journal Title
  
  Proc. of The Forth Asian Conference on Heat Treatment and Surface Engineering
  
  Pages: 350-355
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Hardened Layer and Bending Fatigue Strength of Induction Hardened Thermally Refined Steel Gears2009
- Author(s)
  Kouitsu Miyachika, Hideaki Katanuma, Jun Iwanaga, Hidefumi Mada
- Journal Title
  
  JSME Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.3,No.2
  
  Pages: 136-154
- NAID
  130000127770
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Suitable Profile of Hardened Layer and Pre-Treatment Condition for Bending Fatigue Strength of Induction Hardened Gears2009
- Author(s)
  Kouitsu Miyachika, Hideaki Katanuma, Yohichi Takemura
- Journal Title
  
  Proceedings of The 17^<th> IFHTSE Congress, NETSU SHORI Vol.49 Special Issue Vol.1
  
  Pages: 89-92
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Suitable Profile of Hardened Layer and Pre-Treatment Condition for Bending Fatigue Strength of Induction Hardened Gears2009
- Author(s)
  Kouitsu Miyachika, Hideaki Katanuma, Yohichi Takemura
- Journal Title
  
  Proceedings of The 17th IFHTSE Congress Vol.49,Vol.1
  
  Pages: 89-92
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Load Bearing Capacity of Surface Rolled High Density Sintered Metal Gears2009
- Author(s)
  Takao Koide, Ichiro Ishizuka, Teruie Takemasu, Kouitsu Miyachika, Yasuhiro Fukai
- Journal Title
  
  Proceedings of The JSME International Conference on Motion and Power Transmissions
  
  Pages: 313-316
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Bending Fatigue Strength of Case-Carburized Spur Gears with Boss2008
- Author(s)
  Imaduddin Helimi Bin Wan Nordin, Kazuaki Ando, Kouitsu Miyachika, Tkao Koide, Chiaki Namba
- Journal Title
  
  Proceedings of JSMME 2008 Joint Symposium on Merch. and Materials Eng. Between Tottori Univ. and Northeastern Univ.
  
  Pages: 23-29
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Bending Fatigue Strength of Induction Hardened Thin-Rimmed Spur Gears with Web Arrangement (Effects of Rim Thickness and Web Structure)2008
- Author(s)
  Meng Mu, Seigo Nishimura, Kouitsu Miyachika, Takao Koide
- Journal Title
  
  Proceedings of JSMME 2008 Joint Symposium on Merch. and Materials Eng. Between Tottori Univ. and Northeastern Univ.
  
  Pages: 157-164
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Rolling on Load Bearing Capacity of Sintered Metal Gears2008
- Author(s)
  Ichiro Ishizuka, Takao Koide, Kouitsu Miyachika, teruie Takemasu
- Journal Title
  
  Proceedings of JSMME 2008 Joint Symposium on Merch. and Materials Eng. BetweenTottori Univ. and Northeastern Univ.
  
  Pages: 141-146
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Bending Fatigue Strength of Case-Carburized Spur Gears with Boss2008
- Author(s)
  Imaduddin Helimi Bin Wan Nordin, Kazuaki Ando, Kouitsu Miyachika, Tkao Koide, Chiaki Namba
- Journal Title
  
  Proceedings of JSMME 2008 Joint Symposium on Mech. and Materials Eng. Between Tottori Univ. and Northeastern Univ.
  
  Pages: 23-29
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Rolling on Load Bearing Capacity of Sintered Metal Gears2008
- Author(s)
  Ichiro Ishizuka, Takao Koide, Kouitsu Miyachika, Teruie Takemasu
- Journal Title
  
  Proceedings of JSMME 2008 Joint Symposium on Mech. and Materials Eng. Between Tottori Univ. and Northeastern Univ.
  
  Pages: 141-146
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Residual Stress and Bending Fatigue Strength of Case-Carburiz ed Thin-Rimmed Spur Gears with Asymmetric Web Arrangement2007
- Author(s)
  Kouitsu MIYACHIKA, Wei-Dong XUE, Takao KOIDE, Hidefumi MADA, Kengo NOJIMA, Satoshi ODA and Hideaki KATANUMA
- Journal Title
  
  Proc. of 2007 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Pre-Treatment and Heating Time on Hardened Layer and Bending Fatigue Strength of Induction Hardened Gears2007
- Author(s)
  Kouitsu Miyachika, Hideaki Katanuma, Takao Koide, Michiaki Morimoto, Jun Iwanaga, Hidefumi Mada, Satoshi Oda
- Journal Title
  
  Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Pre-Treatment and Heating Time on Hardened Layer and Bending Fatigue Strength of Induction Hardened Gears2007
- Author(s)
  Kouitsu MIYACHIKA, Hideaki KATANUMA, Takao KOIDE, Michiaki MORIMOTO, Jun IWANAGA, Hidefumi MADA and Satoshi ODA
- Journal Title
  
  Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Heating Conditions on Residual Stress, Hardened Layer and Bending Fatigue Strength of Induction Hardened Sintered Metal Gears2007
- Author(s)
  Kouitsu Miyachika, Takao Koide, Satoshi Oda, Naoki Motoka, Keiichi Uemoto, Yoshihisa Matsumoto, Hideaki Katanuma
- Journal Title
  
  Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)
- Data Source
  KAKENHI-PROJECT-19560143
[Journal Article] Effects of Heating Conditions on Residual Stress, Hardened Layer and Bending Fatigue Strength of Induction Hardened Sintered Metal Gears2007
- Author(s)
  Kouitsu MIYACHIKA, Takao KOIDE, Satoshi ODA, Naoki MOTOOKA, Keiichi UEMOTO, Yoshihisa MATSUMOTO and Hideaki KATANUMA
- Journal Title
  
  Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 薄肉ウェブ構造はすば歯車の歯元応力と伝達トルクに及ぼすねじれ角の影響2014
- Author(s)
  宮近幸逸,Daing Mohamad Nafiz Bin Daing Idris,浅野隆宏,小野勇一
- Organizer
  日本機械学会中国四国支部第52期総会・講演会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-03-07
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉ウェブ構造はすば歯車の曲げ疲労強度に及ぼすねじれ角の影響2014
- Author(s)
  宮近幸逸,Daing Mohamad Nafiz Bin Daing Idris,浅野隆宏,小野勇一
- Organizer
  日本機械学会第14回機素潤滑設計部門講演会
- Place of Presentation
  信州松代ロイヤルホテル
- Year and Date
  2014-04-21
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉ウェブ構造はすば歯車の歯元応力と曲げ疲労強度に及ぼすリム・ウェブ厚さの影響2013
- Author(s)
  宮近幸逸,ダインモハマドナフィズビンダインイドリス
- Organizer
  日本機械学会2013年度年次大会
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] Effects of Helix Angle on Root Stresses of Thin-Rimmed Helical Gears (Cases of β0=10°and 20°)2013
- Author(s)
  Daing Mohamad Nafiz Daing Idris and Kouitsu Miyachika
- Organizer
  Proc. of 5th International Conf. on Manufac. Machine Design and Tribology
- Place of Presentation
  Busan, Korea
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉ウェブ構造はすば歯車の歯元応力に及ぼすウェブ構造およびねじれ角の影響2013
- Author(s)
  宮近幸逸,ダインモハマドナフィズビンダインイドリス
- Organizer
  日本機械学会MPT2013シンポジウム(伝動装置)
- Place of Presentation
  宮日会館(宮崎)
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉ウェブ構造はすば歯車の歯元応力に及ぼすウェブ構造およびねじれ角の影響（ねじれ角β0＝10，20および30°）2013
- Author(s)
  宮近幸逸，ダインモハマドナフィズ　ビンダインイドリス
- Organizer
  日本機械学会MPT2013シンポジウム（伝動装置）
- Place of Presentation
  宮崎市　宮日会館
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] Effects of Helix Angle on Root Stresses of Thin- Rimmed helical Gears (Cases ofβ0=10 and 20 º )2013
- Author(s)
  Daing Mohamad Nafiz Bin Daing Idris and Kouitsu Miyachika
- Organizer
  Proc. of 5th International Conference on Manufacturing, Ma- chine Design and Tribology
- Place of Presentation
  Busan (Korea)
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉対称ウェブ構造はすば歯車の歯元応力と曲げ疲労強度に及ぼすリム・ウェブ厚さの影響2012
- Author(s)
  Daing Mohamad Nafiz Daing Idris,宮近幸逸，小出隆夫
- Organizer
  日本機械学会，第12回基素潤滑設計部門講演会
- Place of Presentation
  愛媛県民会館
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉対称ウェブ構造はすば歯車の歯元応力と曲げ疲労強度に及ぼすリム・ウェブ厚さの影響2012
- Author(s)
  Daing Mohamad Nafiz Bin Daing Idris,宮近幸逸,小出隆夫
- Organizer
  日本機械学会第12回機素潤滑設計部門講演会
- Place of Presentation
  愛媛県民会館
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉対称ウェブ構造はすば歯車の歯元応力及ぼすねじれ角の影響2011
- Author(s)
  Daing Mohamad Nafiz Daing Idris,宮近幸逸，菱川浩平
- Organizer
  日本設計工学会
- Place of Presentation
  広島工業大学（広島市）
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 薄肉ウェブ構造はすば歯車の歯元応力に及ぼすねじれ角の影響2011
- Author(s)
  Daing Mohamad Nafiz Bin Daing Idris,宮近幸逸,菱川浩平
- Organizer
  日本設計工学会
- Place of Presentation
  広島工業大学(広島市)
- Year and Date
  2011-06-03
- Data Source
  KAKENHI-PROJECT-23560161
[Presentation] 高密度焼結金属歯車の荷重伝達能力に及ぼす表面転造とショットピーニングの影響2010
- Author(s)
  小出隆夫, 深井康宏, 竹増光家, 宮近幸逸
- Organizer
  日本機械学会中国四国支部第48期総会・講演会
- Place of Presentation
  広島工業大学
- Year and Date
  2010-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高密度焼結金属歯車の荷重伝達能力に及ぼす表面転造とショットピーニングの影響2010
- Author(s)
  小出隆夫, 深井康宏, 竹増光家, 宮近幸逸
- Organizer
  日本機械学会講演論文集 No.105-1 101～1O2頁
- Place of Presentation
  広島工業大学
- Year and Date
  2010-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の衝撃強度に及ぼす焼戻しの影響2010
- Author(s)
  吉村樹, 宮近幸逸, 茅山真士, 片沼秀明, 馬田秀文
- Organizer
  日本機械学会中国四国支部第48期総会・講演会
- Place of Presentation
  広島工業大学
- Year and Date
  2010-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の衝撃強度に及ぼす焼戻しの影響2010
- Author(s)
  吉村樹, 宮近幸逸, 茅山真士, 片沼秀明, 馬田秀文
- Organizer
  日本機械学会講演論文集 No.105-1 107～108頁
- Place of Presentation
  広島工業大学
- Year and Date
  2010-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす側面浸炭焼入れおよび歯幅の影響2010
- Author(s)
  茅山真士, 宮近幸逸, 馬田秀文, 小出隆夫, 志賀寿
- Organizer
  日本機械学会中国四国支部第48期総会・講演会
- Place of Presentation
  広島工業大学
- Year and Date
  2010-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の曲げ疲労および衝撃強度に及ぼす焼戻しの影響2009
- Author(s)
  吉村樹, 宮近幸逸, 片沼秀明, 茅山真士, 西村征吾, 前田憲正
- Organizer
  日本設計工学会平成21年度秋季大会研究発表講演会講演論文集
- Place of Presentation
  ガーデンパレス広島
- Year and Date
  2009-10-23
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の曲げ疲労および衝撃強度に及ぼす焼戻しの影響2009
- Author(s)
  吉村樹, 宮近幸逸, 片沼秀明, 茅山真士, 西村征吾, 前田憲正
- Organizer
  日本設計工学会平成21年度秋季大会研究発表講演会講演論文集 35～38頁
- Place of Presentation
  ガーデンパレス広島
- Year and Date
  2009-10-23
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす側面浸炭焼入れ,歯幅および粒界酸化の影響2009
- Author(s)
  宮近幸逸, 茅山真士, 亀田真吾, 安藤和彰
- Organizer
  日本設計工学会講演論文集 No.26 19～24頁
- Place of Presentation
  広島工業大学広島校舎
- Year and Date
  2009-06-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高密度焼結金属歯車の荷重伝達能力に及ぼす表面転造の影響2009
- Author(s)
  小出隆夫, 深井康宏, 石塚伊知郎, 竹増光家, 宮近幸逸
- Organizer
  日本機械学会中国四国支部第47期総会・講演会
- Place of Presentation
  山口大学
- Year and Date
  2009-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ歯車の曲げ疲労および衝撃強度に及ぼす焼戻しの影響2009
- Author(s)
  西村征吾, 宮近幸逸, 安藤和彰, 志賀寿, 小出隆夫
- Organizer
  日本機械学会中国四国支部第47期総会・講演会
- Place of Presentation
  山口大学
- Year and Date
  2009-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす側面浸炭焼入れ, 歯幅および粒界酸化の影響2009
- Author(s)
  宮近幸逸, 茅山真士, 亀田真吾, 安藤和彰
- Organizer
  日本設計工学会講演論文集
- Place of Presentation
  広島工業大学広島校舎
- Year and Date
  2009-06-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の曲げ疲労(加熱時間, 前処理および歯数の影響)2009
- Author(s)
  宮近幸逸, 牟猛, 片沼秀明, 吉村樹, 馬田秀文, 小出隆夫
- Organizer
  日本機械学会中国四国支部第47期総会・講演会
- Place of Presentation
  山口大学
- Year and Date
  2009-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れはすば歯車の曲げ疲労強度・き裂伝ぱ2008
- Author(s)
  安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会第8回機素潤滑設計部門講演会
- Place of Presentation
  倉敷アイビースクエア
- Year and Date
  2008-04-21
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の硬さと曲げ疲労強度2008
- Author(s)
  片沼秀明, 竹村揚一, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会第8回機素潤滑設計部門講演会
- Place of Presentation
  倉敷アイビースクエア
- Year and Date
  2008-04-21
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす焼戻しの影響2008
- Author(s)
  西村征吾, 安藤和彰, 宮近幸逸, 小出隆夫, 難波千秋, 小田哲
- Organizer
  日本機械学会中国四国支部・九州支部合同企画「岡山講演会」
- Place of Presentation
  岡山大学
- Year and Date
  2008-10-22
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす焼戻しの影響2008
- Author(s)
  西村征吾, 安藤和彰, 宮近幸逸, 小出隆夫, 難波千秋, 小田哲
- Organizer
  日本機械学会中国四国支部・九州支部合同企画「岡山講演会」
- Place of Presentation
  岡山大
- Year and Date
  2008-10-22
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波および浸炭焼入れ歯車の硬化層と曲げ疲労強度2008
- Author(s)
  片沼秀明, 宮近幸逸, 竹村揚一, 小出隆夫, 小田哲
- Organizer
  日本機械学会2008年度年次大会
- Place of Presentation
  横浜国立大学
- Year and Date
  2008-08-02
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れ平歯車の歯元曲げ強度に及ぼすボス幅の影響2008
- Author(s)
  安藤和彰, 宮近幸逸, 小出隆夫, 難波千秋, 小田哲
- Organizer
  日本機械学会中国四国支部第46期総会・講演会
- Place of Presentation
  近畿大学工学部(東広島市)
- Year and Date
  2008-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭および高周波焼入れ薄肉非対称ウェブ構造平歯車の曲げ疲労強度・き裂2008
- Author(s)
  竹村揚一, 牟猛, 片沼秀明, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会中国四国支部第46期総会・講演会
- Place of Presentation
  近畿大学工学部(東広島市)
- Year and Date
  2008-03-06
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ薄肉ウェブ構造平歯車の曲げ疲労強度(リム厚さおよびウェブ構造の影響)2007
- Author(s)
  宮近幸逸, 牟猛, 片沼秀明, 竹村揚一, 小出隆夫, 難波千秋
- Organizer
  日本機械学会MPT2007シンポジウム<伝動装置>
- Place of Presentation
  鳥取県民文化会館
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れはすば歯車の曲げ疲労強度・き裂に及ぼすねじれ角・浸炭部の影響2007
- Author(s)
  安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会2007年度年次大会
- Place of Presentation
  関西大学吹田キャンパス
- Year and Date
  2007-09-11
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れはすば歯車の残留応力と曲げ疲労強度(硬化層深さ, ねじれ角および浸炭部の影響)2007
- Author(s)
  安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会MPT2007シンポジウム<伝動装置>
- Place of Presentation
  鳥取県民文化会館
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 高周波焼入れ歯車の曲げ疲労強度に対する最適硬化層パターン2007
- Author(s)
  片沼秀明, 竹村揚一, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会MPT2007シンポジウム<伝動装置>
- Place of Presentation
  鳥取県民文化会館
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-19560143
[Presentation] 浸炭焼入れはすば歯車の残留応力と曲げ疲労強度(硬化層深さ,ねじれ角および浸炭部の影響)2007
- Author(s)
  安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
- Organizer
  日本機械学会MPT2007シンポジウム<伝動装置>
- Place of Presentation
  鳥取県民文化会館
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-19560143

1. KOIDE Tkao (60127446)

# of Collaborated Projects: 12 results

# of Collaborated Products: 39 results
2. ODA Satoshi (50032016)

# of Collaborated Projects: 10 results

# of Collaborated Products: 0 results
3. KAWAGOE Haruo (60032009)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. TAKI Tokihiko (40248208)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MIYACHIKA Kouitsu 宮近 幸逸

宮隆 幸逸 ミヤチカ コウイツ

Research Projects

Research Products

Co-Researchers

Bending Strength Design of Thin-Rimmed Helical Gears with Various Web ArrangementsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optimization of Gear Strength Using Heat Treatment SimulationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Optimum Coil Design and Hardening Condition for Gear Induction HardeningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Prediction and Monitoring Technique of Failure of Gear Teeth by Means of AE MethodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Effects of Helix Angle on Root Stresses of Thin-Rimmed Helical Gears with Various Web Arrangements2013

Author(s)

Journal Title

Data Source

[Journal Article] Root Stress and Bending Fatigue Strength of Thin-Rimmed Helical Gears with Web Arrangement2013

Author(s)

Journal Title

Data Source

[Journal Article] Effects of Helix Angle on Root Stresses of Thin- Rimmed Helical Gears with Various Web Arrangements2013

Author(s)

Journal Title

MIYACHIKA Kouitsu 宮近幸逸

宮隆幸逸ミヤチカコウイツ