SHINOZUKA JUN 篠塚淳

… Alternative Names

Researcher Number	30282841
Other IDs
External Links
Affiliation (Current)	2019: 横浜国立大学, 大学院工学研究院, 准教授
Affiliation (based on the past Project Information) *help	2016 – 2017: 横浜国立大学, 大学院工学研究院, 准教授 2015: 横浜国立大学, 工学(系)研究科(研究院), 准教授 2012: 横浜国立大学, 大学院・工学研究院, 准教授 2009 – 2012: Yokohama National University, 工学研究院, 准教授 2009: Yokohama National University, 大学院・工学研究院, 准教授 … More
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 Except Principal Investigator 機械工作・生産工学
Keywords	Principal Investigator 切削加工 / 超高速切削 / 切削力 / 切削温度 / 静水圧 / 衝撃波 / 塑性衝撃波 / 塑性波 / 熱弾塑性有限要素法 / 切りくず … More Except Principal Investigator MQL / 切削 / virtual machining / 仮想切削 / 切削加工 / CAE / 切削温度 / シミュレーション / FEM / cutting / 粘弾塑性モデル / 可視化 / 表面特性 / ultra-high speed / chip formation / 切削油剤 / chip control / computer simulation / helical end mill / surface characteristics / 超高速 / Machining / 運動方程式 / すくい面応力分布 / Cutting temperature monitoring / dynamic analysis / ヘリカルエンドミル / 切削温度モニタリング / 工具摩耗 / Cutting / Difficult-to-Machine Materials / 超音波振動切削 / Cooling efficiency evaluation system / 延性破壊 / Ultrasonic Vibration Cutting / 残留応力 / 切りくず生成 / 高速切削 / cutting temperature / tool wear / Simulation / 超高速切削 / 動的応答解析 / バーチャルマシ-ニング / machining system / 熱弾塑性有限要素法 / 切りくず処理 / 工具面温度 / ミスト / バーチャルマシニング / 生産加工システム / simulation / elasto-visco-plastic model / machining / 冷却効果評価システム / 流れ解析 / 鋸歯状切りくず生成 / コンピュータ・シミュレーション / 難削材 Less

Development of a prediction system of material dynamic behavior under severe deformation condition by considering the deformation state of the cuttingPrincipal Investigator
- Principal Investigator
  
  SHINOZUKA JUN
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Yokohama National University
Clarification of tribology and affinity in high-speed cutting by use of an intelligent cutting tool with built-in temperature and force sensorsPrincipal Investigator
- Principal Investigator
  
  SHINOZUKA Jun
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Yokohama National University
Investigation of the formation of an innovative machined surface by high surface-active and high hydrostatic stresses induced by the plastic shock waves under ultra high-speed cutting conditionsPrincipal Investigator
- Principal Investigator
  
  SHINOZUKA Jun
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Yokohama National University
  Ibaraki University
Generating of high performance surface by ultra high-speed cutting with plasticity shock wavePrincipal Investigator
- Principal Investigator
  
  SHINOZUKA Jun
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
ナノ薄膜センサ内蔵型インテリジェント工具の開発Principal Investigator
- Principal Investigator
  
  篠塚淳
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
MQL Cutting of Difficult-to-Machine Materials with the aids of CAE and Ultrasonic Vibration
- Principal Investigator
  
  OBIKAWA Toshiyuki
- Project Period (FY)
  2002 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
塑性波伝播形態を考慮した超高速切削機構の材料物理学的検討Principal Investigator
- Principal Investigator
  
  篠塚淳
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Institute of Technology
高機能切削工具刃型形状の設計に関する研究Principal Investigator
- Principal Investigator
  
  篠塚淳
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Institute of Technology
Study on Minimum Coolant Cutting Technology
- Principal Investigator
  
  OBIKAWA Toshiyuki
- Project Period (FY)
  1999 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Institute of Technology
Construction of virtual machining system for interrupted ultra-high speed machining
- Principal Investigator
  
  SHIRAKASHI Takahiro
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Denki University
  Tokyo Institute of Technology
Virtual Machining of High Speed Mechining and Its Application to Machining System
- Principal Investigator
  
  OBIKAWA Toshiyuki
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Institute of Technology
Development of Virtual Machining System for Obtaining "Know How" on Machining
- Principal Investigator
  
  SHIRAKASHI Takahiro
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY

All 2017 2016 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2002

All Journal Article Presentation

[Journal Article] Experimental Investigation of Heat Partition Ratio for the Cutting Tool at a Cutting Speed Ranging from 38 to 6500 m/min2016
- Author(s)
  Jun Shinozuka and Daiki Kidoura
- Journal Title
  
  Materials Science Forum
  
  Volume: 874 Pages: 450-456
- DOI
  10.4028/www.scientific.net/msf.874.450
- Open Access / Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05716
[Journal Article] Measurement of the temperature distribution at the tool-chip interface by using a cutting tool with seven pairs of built-in micro Cu/Ni thermocouples2016
- Author(s)
  Jun Shinozuka, Habibah Binti JAHARADAK
- Journal Title
  
  Advanced Materials Research
  
  Volume: 1136 Pages: 586-591
- DOI
  10.4028/www.scientific.net/amr.1136.586
- Open Access / Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05716
[Journal Article] Development of a cutting tool with micro built - in thermocouples - Characteristic of the micro Cu/Ni thermocouples fabricated by electroless plating and electro plating2012
- Author(s)
  Junichi HARASHITA, Yuji TOMODA and JunSHINOZUKA
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vols.523-524 Pages: 815-820
- DOI
  10.4028/www.scientific.net/kem.523-524.815
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360059
[Journal Article] 薄硬質材と薄軟質材の積層工昇を用いた超音波加2による微細溝群の創成2010
- Author(s)
  篠塚淳
- Journal Title
  
  砥粒加工学会誌
  
  Volume: Vol.54,No.8 Pages: 482-487
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360059
[Journal Article] 薄硬質材と薄軟質材の積層工具を用いた超音波加工による微細溝群の創成2010
- Author(s)
  篠塚淳
- Journal Title
  
  砥粒加工学会誌
  
  Volume: Vol.54,No.8 Pages: 482-487
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360059
[Journal Article] Microscopic phase-dependent residual stresses in the machined surface layer of two-phase alloy2009
- Author(s)
  T. Obikawa, Y. Takemura, Y. Akiyama, J. Shinozuka, H. Sasahara
- Journal Title
  
  Journal of Materials Processing Technology 209
  
  Pages: 4496-4501
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360057
[Journal Article] Fabrication of multiple micro-grooves by ultrasonic machining with a tool that laminated thin hard-material and thin soft-material2009
- Author(s)
  Jun Shinozuka
- Journal Title
  
  Advanced Materials Research 76-78
  
  Pages: 577-582
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360057
[Journal Article] Finite Difference Modeling of Cutting Temperature in Machining of A6061-T6 Aluminum Alloy at Ultra High Cutting Speeds2007
- Author(s)
  Toshiyuki Obikawa, Ali Basti, Jun Shinozuka
- Journal Title
  
  Key Engineering Materials 329
  
  Pages: 681-686
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360057
[Journal Article] Tools with Built-in Thin Film Thermocouple Sensors for Monitoring Cutting Temperature2007
- Author(s)
  Ali Basti, Toshiyuki Obikawa and Jun Shinozuka
- Journal Title
  
  International Journal of Machine Tools and Manufacture 47
  
  Pages: 793-798
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360057
[Journal Article] Finite Difference Modeling of Cutting Temperature in Machining of A6061-T6 Aluminum Alloy at Ultra High Cutting Speeds2007
- Author(s)
  Toshiyuki Obikawa, Ali Basti and Jun Shinozuka
- Journal Title
  
  Key Engineering Materials 329
  
  Pages: 681-686
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360057
[Journal Article] Tools with Built-in Thin Film Thermocouple Sensors for Monitoring Cutting Temperature2007
- Author(s)
  Ali Basti, Toshiyuki Obikawa, Jun Shinozuka
- Journal Title
  
  International Journal of Machine Tools and Manufacture 47
  
  Pages: 793-798
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360057
[Journal Article] Drucker-Pragerモデルを導入した高速・超高速切削身シュレーション2006
- Author(s)
  篠塚淳
- Journal Title
  
  2006年精密工学会秋季大会学術講演会講演論文集
  
  Pages: 303-304
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] Drucker-Prager降伏条件を用いた超高速切削シミュレーション2006
- Author(s)
  篠塚淳
- Journal Title
  
  2006年度砥粒加工学会学術講演会講演論文集
  
  Pages: 57-58
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] FEM Simulation in High-Speed and Ultra High-Speed Cutting with Drucker-Prager Yield Criterion2006
- Author(s)
  Jun Shinozuka
- Journal Title
  
  Proceeding of JSPE
  
  Pages: 303-304
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] Drucker-Pragerモデルを導入した高速・超高速切削シミュレーション2006
- Author(s)
  篠塚淳
- Journal Title
  
  2006年精密工学会秋季大会学術講演会講演論文集
  
  Pages: 303-304
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] FEM Cutting Simulation in Ultra High-speed Cutting with Drucker-Prager Yield Criterion2006
- Author(s)
  Jun Shinozuka
- Journal Title
  
  Proceeding of ABTEC
  
  Pages: 57-58
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] Measurement of Cutting Temperature with Tools with Thin Film Thermocouple2005
- Author(s)
  Jun Shinozuka, Koji Utsumi, Ali Basti, Toshiyuki Obikawa
- Journal Title
  
  Proc.JSPE Spring Meeting
  
  Pages: 607-608
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] Development of Orthogonal Impact Cutting Testing machine2005
- Author(s)
  J.Shinozuka, T.Obikawa
- Journal Title
  
  Key Engineering Materials Vol. 291-292
  
  Pages: 507-501
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] 高速・高能率溝入れ加工におけるMQLの効果2005
- Author(s)
  帯川利之, 釜田康裕, 篠塚淳
- Journal Title
  
  日本機械学会論文集(C編) 71
  
  Pages: 311-318
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] Performance of MQL in High Speed and High Efficiency Grooving2005
- Author(s)
  Toshiyuki Obikawa, Yasuhiro Kamata, Jun Shinozuka
- Journal Title
  
  Trans.JSME(Ser.C) 71-701
  
  Pages: 311-318
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] 高速・高能率溝入れ加工におけるMQLの効果2005
- Author(s)
  帯川利之, 釜田康裕, 篠塚淳
- Journal Title
  
  日本機械学会論文集(C編) 71・701
  
  Pages: 311-318
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] 薄膜温度センサ内臓型切削工具による工具すくい面温度分布の測定2005
- Author(s)
  篠塚淳, 他3名
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 607-608
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] Development of Orthogonal Impact Cutting Testing machine2005
- Author(s)
  J.Shinozuka, T.Obikawa
- Journal Title
  
  Key Engineering Materials 291・292
  
  Pages: 507-512
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] Development of Orthogonal Impact Cutting Testing machine2005
- Author(s)
  J.Shinozuka, T.Obikawa
- Journal Title
  
  Key Engineering Materials 291-292
  
  Pages: 507-512
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560092
[Journal Article] Analysis of Mist Flow in MQL Cutting2004
- Author(s)
  Y.Kamata, T.Obikawa, J.Shinozuka
- Journal Title
  
  Key Engineering Materials 257
  
  Pages: 339-344
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] 薄膜温度センサ内蔵インテリジェント切削工具の開発2004
- Author(s)
  篠塚淳, 内海幸治, Basti Ali, 帯川利之
- Journal Title
  
  (社)日本機械学会第5回生産加工・工作機械部門講演会講演論文集
  
  Pages: 251-252
- Data Source
  KAKENHI-PROJECT-15760077
[Journal Article] 薄膜温度センサ内蔵型切削工具による工具すくい面温度分布の測定2004
- Author(s)
  篠塚淳, 内海幸治, Basti Ali, 帯川利之
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 607-608
- Data Source
  KAKENHI-PROJECT-15760077
[Journal Article] Development of Cutting Tools with Built-in Thin Film Thermocouples2004
- Author(s)
  J.Shinozuka, T.Obikawa
- Journal Title
  
  Key Engineering Materials 257
  
  Pages: 547-552
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] 高速突切り加工におけるMQLの効果2004
- Author(s)
  釜田康裕, 篠塚淳, 帯川利之
- Journal Title
  
  2004年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 545-546
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] Effects of MQL in High Speed Cutting-off2004
- Author(s)
  Yasuhiro Kamata, Jun Shinozuka, Toshiyuki Obikawa
- Journal Title
  
  Proc.JSPE Spring Meeting
  
  Pages: 545-546
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] 薄膜温度センサ内臓インテリジェント切削工具の開発2004
- Author(s)
  篠塚淳, 他3名
- Journal Title
  
  日本機械学会第5回生産加工・工作機械部門講演会講演論文集
  
  Pages: 251-252
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] Development of Intelligent Tools with Thin Film Thermocouple2004
- Author(s)
  Jun Shinozuka, Koji Utsumi, Ali Basti, Toshiyuki Obikawa
- Journal Title
  
  Proc.5th Machine Tool and Manufacturing Conference, JSME
  
  Pages: 251-252
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] 突切りにおけるセミドライ切削の効果2002
- Author(s)
  帯川利之, 釜田康裕, 篠塚淳
- Journal Title
  
  日本機械学会第4回生産加工・工作機械部門講演会講演論文集
  
  Pages: 165-166
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Journal Article] Semi-dry cutting-off2002
- Author(s)
  Toshiyuki Obikawa, Yasuhiro Kamata, Jun Shinozuka
- Journal Title
  
  Proc.4th Machine Tool and Manufacturing Conference, JSME
  
  Pages: 165-166
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350068
[Presentation] 次世代切削加工システムの創造のための加工現象の解明2017
- Author(s)
  篠塚淳
- Organizer
  精密工学会第386回講習会
- Data Source
  KAKENHI-PROJECT-15K05716
[Presentation] Investigation of ultra-high speed cutting mechanism by considering tool-chip friction property and inertia force derived from chip formation2017
- Author(s)
  Jun Shinozuka
- Organizer
  17th international conference of the european society for precision engineering and nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05716
[Presentation] 微細熱電対群内蔵工具を用いた工具すくい面の温度場の切削開始からの過渡的変化の検討2016
- Author(s)
  篠塚淳，島悠太郎
- Organizer
  2016年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  茨城大学
- Year and Date
  2016-09-06
- Data Source
  KAKENHI-PROJECT-15K05716
[Presentation] 切削工具表面に設置した微細熱電対群の温度－熱起電力校正装置の開発2013
- Author(s)
  原下洵一，篠塚淳
- Organizer
  2013年度精密工学会春季大会学術講演会
- Place of Presentation
  東京工業大学
- Invited
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 切削工具表面に設置した微細熱電対群の温度-熱起電力校正装置の開発2013
- Author(s)
  原下洵一,篠塚淳
- Organizer
  2013年度精密工学会春季大会学術講演会
- Place of Presentation
  東京工業大学
- Year and Date
  2013-03-13
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 微細熱電対群を内蔵した切削工具の開発 - 超硬工具表面に対する超音波微細溝加工特性の実験的検討 -2012
- Author(s)
  山田晃久, 篠塚淳
- Organizer
  2012年度砥粒加工学会学術講演会
- Place of Presentation
  同志社大学
- Invited
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 刃先に微細熱電対群を内蔵した切削工具の作成に関する研究2012
- Author(s)
  友田裕士,原下洵一,篠塚淳
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] Fabrication of a tool insert in which micro thermocouples are embedded for monitoring cutting temperature2011
- Author(s)
  Yuji TOMODA, Junichi HARASHITA, Jun SHINOZUKA
- Organizer
  6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  大宮ソニックシティー(埼玉県)
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 工具刃先に微細なCu-Ni熱電対を埋め込んだセンサ内蔵工具の作成2011
- Author(s)
  原下洵一, 友田裕士, 篠塚淳
- Organizer
  2011年度砥粒加工学会学術講演会
- Place of Presentation
  中部大学(愛知県)
- Year and Date
  2011-09-08
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 刃先に微細熱電対群を内蔵した切削工具の作成に関する研究2011
- Author(s)
  友田裕士, 原下洵一, 篠塚淳
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2011-03-14
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] Fabrication of a tool insert in which micro thermocouples are embedded for monitoring cutting temperature2011
- Author(s)
  Yuji TOMODA, Junichi HARASHITA and Jun SHINOZUKA
- Organizer
  6th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  埼玉
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 切削工具の工具一切りくず接触域の温度分布測定に関する研究2010
- Author(s)
  篠塚淳, 友田裕士
- Organizer
  2010年度砥粒加工学会学術講演会
- Place of Presentation
  岡山大学工学部(岡山県)
- Year and Date
  2010-08-26
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 切削工具の工具-切りくず接触域の温度分布測定に関する研究2010
- Author(s)
  篠塚淳,友田裕士
- Organizer
  2010年度砥粒加工学会学術講演会
- Place of Presentation
  岡山大学
- Year and Date
  2010-08-26
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 超音波微細溝加工法とめっき法を用いた微細温度センサ内蔵工具の試作2010
- Author(s)
  原下洵一, 友田裕士, 篠塚淳
- Organizer
  砥粒加工学会卒業研究発表会
- Place of Presentation
  大田区産業プラザ(東京都)
- Year and Date
  2010-03-04
- Data Source
  KAKENHI-PROJECT-22360059
[Presentation] 構造材料設計のためのFEM切削シミュレーション2009
- Author(s)
  篠塚淳
- Organizer
  第3回横幹連合コンファレンス
- Place of Presentation
  東北大学
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] 不均一材のFEM切削シミュレーション2009
- Author(s)
  篠塚淳
- Organizer
  2009年度砥粒加工学会学術講演会
- Place of Presentation
  ものつくり大学
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] 薄硬質材-薄軟質材サンドウィッチ工具を用いた超音波加工による微細溝郡の創成2009
- Author(s)
  篠塚淳
- Organizer
  2009年精密工学会春季大会学術講演会
- Place of Presentation
  中央大学
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] Fem Cutting Simulation with a Drucker-Prager Yield Criterionin High-speed and Ultra High-speed Cutting2008
- Author(s)
  Jun Shinozuka, Takeshi Hatta, Shigekazu Ito, Hiroaki Yoshida, Sachihiro Isogawa
- Organizer
  8th Asia-Pacific Conference on Materials Processing
- Place of Presentation
  中国(広州)
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] 切削環境を制御できる高速衝撃切削試験装置の開発2008
- Author(s)
  篠塚淳, 堀江丞
- Organizer
  2008年精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] Fem Cutting Simulation with a Drucker-Prager Yield Criterion in High-speed and Ultra High-speed Cutting2008
- Author(s)
  Jun Shinozuka, Takeshi Hatta, Shigekazu Ito, Hiroaki Yoshida, Sachihiro Isogawa
- Organizer
  8th Asia-Pacific Conference on Materials Processing
- Place of Presentation
  中国
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] High Levels of Hydrostatic Stress at Shear Zone Induced by Plastic Shock Waves under Ultra High-speed Cutting Conditions2007
- Author(s)
  J. Shinozuka, T. Obikawa
- Organizer
  10th CIRP International Workshop on Modeling of Machining Operations
- Place of Presentation
  イタリア
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] 環境制御型衝撃切削試験機の開発2007
- Author(s)
  篠塚淳, 堀江丞
- Organizer
  2007年度茨城講演会
- Place of Presentation
  茨城大学工学部
- Year and Date
  2007-09-28
- Data Source
  KAKENHI-PROJECT-19360057
[Presentation] 動的熱弾塑性FEM切削シミュレーションによる高速・超高速切削過程の仕上げ面特性の検討2007
- Author(s)
  篠塚淳, 堀江丞
- Organizer
  2007年度砥粒加工学会学術講演会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-19360057

1. OBIKAWA Toshiyuki (70134830)

# of Collaborated Projects: 4 results

# of Collaborated Products: 11 results
2. SHIRAKASHI Takahiro (50016440)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
3. 笹原弘之 (00205882)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. MATSUMURA Takashi (20199855)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SHINOZUKA JUN 篠塚 淳

SHINOZUKA Jun 篠塚 淳

Research Projects

Research Products

Co-Researchers

Development of a prediction system of material dynamic behavior under severe deformation condition by considering the deformation state of the cuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Clarification of tribology and affinity in high-speed cutting by use of an intelligent cutting tool with built-in temperature and force sensorsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation of the formation of an innovative machined surface by high surface-active and high hydrostatic stresses induced by the plastic shock waves under ultra high-speed cutting conditionsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Generating of high performance surface by ultra high-speed cutting with plasticity shock wavePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ナノ薄膜センサ内蔵型インテリジェント工具の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

MQL Cutting of Difficult-to-Machine Materials with the aids of CAE and Ultrasonic Vibration

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

塑性波伝播形態を考慮した超高速切削機構の材料物理学的検討Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

高機能切削工具刃型形状の設計に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Minimum Coolant Cutting Technology

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Construction of virtual machining system for interrupted ultra-high speed machining

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Virtual Machining of High Speed Mechining and Its Application to Machining System

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Virtual Machining System for Obtaining "Know How" on Machining

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Experimental Investigation of Heat Partition Ratio for the Cutting Tool at a Cutting Speed Ranging from 38 to 6500 m/min2016

Author(s)

Journal Title

SHINOZUKA JUN 篠塚淳

SHINOZUKA Jun 篠塚淳