Sato Masugu 佐藤眞直

… Alternative Names

佐藤眞直サトウマスグ

佐藤真直サトウマスグ

Less

Researcher Number	30360837
Other IDs
Affiliation (Current)	2025: 公益財団法人高輝度光科学研究センター, 産業利用・産学連携推進室, 室長
Affiliation (based on the past Project Information) *help	2020 – 2022: 公益財団法人高輝度光科学研究センター, 産業利用・産学連携推進室, 主席研究員 2017 – 2019: 公益財団法人高輝度光科学研究センター, 産業利用推進室, 主席研究員 2016: 公益財団法人高輝度光科学研究センター, 産業利用推進室, 副主席研究員 2015: 公益財団法人高輝度光科学研究センター, 産業利用推進室, 主幹研究員
Review Section/Research Field	Except Principal Investigator Basic Section 38050:Food sciences-related / Structural/Functional materials / Eating habits
Keywords	Except Principal Investigator スローオペランド / 混ざり方の定量化 / 直接観察 / カゼインミセルネットワーク / 熟成プロセス / ナチュラルチーズ / コロイド状リン酸カルシウム / カゼインミセル / チーズのナノ構造 / CCP … More / ナノ構造解析 / 非破壊ナノ構造解析 / ナチュラルチーズの微細構造 / 微細組織解析 / 量子ビーム / 食品科学 / マルテンサイト変態 / 変形双晶 / 加工硬化 / 粒界 / 延性 / 強度 / 超微細粒 / 構造用金属材料 / ミクロマクロ計測 / 乳製品 / X線CT / 3次元計測 / 氷結晶 / 気泡 / 食品内部構造 / ミクロからマクロ計測 / 調理と加工 Less

Nanostructure and property of fresh cheese (curd)
- Principal Investigator
  
  Ohnuma Masato
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 38050:Food sciences-related
- Research Institution
  Hokkaido University
Evaluation of food processing techniques based on 3-D measurement of microscale to macroscale structure
- Principal Investigator
  
  DO Gabsoo
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Eating habits
- Research Institution
  Nihon University
Materials design based on fundamental understanding of peculiar mechanical properties of bulk nanostructure metals
- Principal Investigator
  
  Tsuji Nobuhiro
- Project Period (FY)
  2015 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyoto University

All 2021 2020 2019 2018 2017 2015

All Journal Article Presentation

[Journal Article] Role of retained austenite in low alloy steel at low temperature monitored by neutron diffraction2020
- Author(s)
  Yamashita Takayuki、Morooka Satoshi、Harjo Stefanus、Kawasaki Takuro、Koga Norimitsu、Umezawa Osamu
- Journal Title
  
  Scripta Materialia
  
  Volume: 177 Pages: 6-10
- DOI
  10.1016/j.scriptamat.2019.10.002
- NAID
  120006781963
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K15279, KAKENHI-PROJECT-15H05767, KAKENHI-PLANNED-18H05455
[Journal Article] Change in Mechanical Properties by High-Cycle Loading Up to Gigacycle for 316L Stainless Steel2020
- Author(s)
  Naoe Takashi、Harjo Stefanus、Kawasaki Takuro、Xiong Zhihong、Futakawa Masatoshi
- Journal Title
  
  JPS Conference Procedings
  
  Volume: 28 Pages: 061009-061009
- DOI
  10.7566/jpscp.28.061009
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05767, KAKENHI-PROJECT-17K14565, KAKENHI-PLANNED-18H05455
[Journal Article] Real time observation of martensite transformation for a 0.4C low alloyed steel by neutron diffraction2020
- Author(s)
  Wang Yanxu、Tomota Yo、Ohmura Takahito、Morooka Satoshi、Gong Wu、Harjo Stefanus
- Journal Title
  
  Acta Materialia
  
  Volume: 184 Pages: 30-40
- DOI
  10.1016/j.actamat.2019.11.051
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05767, KAKENHI-PLANNED-18H05455
[Journal Article] Dislocation densities and intergranular stresses of plastically deformed austenitic steels2019
- Author(s)
  Tomota Y.、Ojima M.、Harjo S.、Gong W.、Sato S.、Ungar T.
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 743 Pages: 32-39
- DOI
  10.1016/j.msea.2018.09.052
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PLANNED-18H05479, KAKENHI-PROJECT-15H05767
[Journal Article] Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using <i>In-Situ</i> X-ray Diffraction Technique2015
- Author(s)
  Adachi, Hiroki; Miyajima, Yoji; Sato, Masugu; et al.
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 56 Issue: 5 Pages: 671-678
- DOI
  10.2320/matertrans.L-M2015803
- NAID
  130005065988
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H05767
[Journal Article] Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium2015
- Author(s)
  Miyajima, Yoji; Komatsu, Shin-ya; Mitsuhara, Masatoshi; et al.
- Journal Title
  
  Philosophical Magazine
  
  Volume: 95 Issue: 11 Pages: 1139-1149
- DOI
  10.1080/14786435.2015.1021400
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H05767
[Presentation] "Slow-Operando" measurements by laboratory small-angle X-ray scattering with high energy source2021
- Author(s)
  Masato Ohnuma, Shigeru Kuramoto, Isamu Kaneda
- Organizer
  International Union of Crystallography 2020
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02926
[Presentation] Measuring freezer burn of foods using X-ray computed tomography2019
- Author(s)
  Gabsoo Do, Sadanori Sase, Rika Kobayashi, Masugu Sato
- Organizer
  The International Congress on Engineering and Food (ICEF 13)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K00826
[Presentation] X線CTによる冷凍食品の冷凍焼け評価2018
- Author(s)
  岩澤明秀，都　甲洙，佐瀬勘紀，小林りか，佐藤眞直
- Organizer
  2018年度日本冷凍空調学会年次大会
- Data Source
  KAKENHI-PROJECT-17K00826
[Presentation] “Contribution of Different Types of Interfaces to Strain-Hardening Behavior of Ti-6Al-4V Alloy with Bimodal Microstructure”2017
- Author(s)
  ○Yan Chong, Masatoshi Mitsuhara, Tilak Bhattacharjee, Shigeto Yamasaki, Akinobu Shibata, Hideharu Nakashima, Nobuhiro Tsuji
- Organizer
  MRS Fall meeting
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05767
[Presentation] “Deformation mechanism of ultrafine-grained high-Mn TWIP steels”2017
- Author(s)
  Yu Bai, Hiroki Kitamura, Sukyoung Hwang, Satoshi Yamauchi, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji
- Organizer
  ISSS2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05767

1. DO Gabsoo (40385993)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
2. Tsuji Nobuhiro (30263213)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
3. Ohnuma Masato (90354208)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
4. Stefanus Harjo (40391263)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
5. 柴田曉伸 (60451994)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 中村卓 (30328968)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 金田勇 (30458129)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
8. 栃原孝志 (70458131)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 柴田暁伸

# of Collaborated Projects: 0 results

# of Collaborated Products: 2 results
10. 山下享介

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

Sato Masugu 佐藤 眞直

佐藤 眞直 サトウ マスグ

佐藤 真直 サトウ マスグ

Research Projects

Research Products

Co-Researchers

Nanostructure and property of fresh cheese (curd)

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Evaluation of food processing techniques based on 3-D measurement of microscale to macroscale structure

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Materials design based on fundamental understanding of peculiar mechanical properties of bulk nanostructure metals

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Role of retained austenite in low alloy steel at low temperature monitored by neutron diffraction2020

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] Change in Mechanical Properties by High-Cycle Loading Up to Gigacycle for 316L Stainless Steel2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Real time observation of martensite transformation for a 0.4C low alloyed steel by neutron diffraction2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Dislocation densities and intergranular stresses of plastically deformed austenitic steels2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using <i>In-Situ</i> X-ray Diffraction Technique2015

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium2015

Author(s)

Journal Title

DOI

Data Source

[Presentation] "Slow-Operando" measurements by laboratory small-angle X-ray scattering with high energy source2021

Author(s)

Organizer

Data Source

[Presentation] Measuring freezer burn of foods using X-ray computed tomography2019

Author(s)

Organizer

Data Source

[Presentation] X線CTによる冷凍食品の冷凍焼け評価2018

Author(s)

Organizer

Data Source

[Presentation] “Contribution of Different Types of Interfaces to Strain-Hardening Behavior of Ti-6Al-4V Alloy with Bimodal Microstructure”2017

Author(s)

Organizer

Data Source

[Presentation] “Deformation mechanism of ultrafine-grained high-Mn TWIP steels”2017

Author(s)

Organizer

Data Source

Sato Masugu 佐藤眞直

佐藤眞直サトウマスグ

佐藤真直サトウマスグ