UCHIDATE Michimasa 内舘道正

… Alternative Names

Uchidate Michimasa 内舘道正

Less

Researcher Number	30422067
Other IDs
Affiliation (Current)	2025: 岩手大学, 理工学部, 教授
Affiliation (based on the past Project Information) *help	2025: 岩手大学, 理工学部, 教授 2021 – 2023: 岩手大学, 理工学部, 教授 2016 – 2020: 岩手大学, 理工学部, 准教授 2013 – 2015: 岩手大学, 工学部, 助教 2007 – 2011: 岩手大学, 工学部, 助教
Review Section/Research Field	Principal Investigator Basic Section 18040:Machine elements and tribology-related / Design engineering/Machine functional elements/Tribology Except Principal Investigator Production engineering/Processing studies / Design engineering/Machine functional elements/Tribology
Keywords	Principal Investigator 表面粗さ / 接触 / 表面性状 / シミュレーション / 高さ分布 / パラメータ / 腐食摩耗 / トライボロジー / フィルタ / 表面 … More / 腐食 / モデル / 機械加工 / 自己相関係数 / 粗さ / 加工 / テクスチャ / 設計 / テクスチャリング / 不動態化 / 水潤滑 / 界面・表面 … More Except Principal Investigator 測定標準面 / 不確かさ / 国際標準規格 / 表面性状 / ナノ・マイクロ加工 / 金型技術 / 機械工作・生産工学 / 表面・界面 / テクスチャリング / トライボロジー Less

新規国際規格に基づく表面性状評価法の互換性評価Principal Investigator
- Principal Investigator
  
  内舘道正
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Iwate University
新規国際標準規格に基づく表面性状評価手法の確立Principal Investigator
- Principal Investigator
  
  内舘道正
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Iwate University
Modelling of tirobocorrosion in a microscopic scalePrincipal Investigator
- Principal Investigator
  
  Uchidate Michimasa
- Project Period (FY)
  2018 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Iwate University
Robust Estimation of the Areal Texture Parameters using the Pearson Distribution SystemPrincipal Investigator
- Principal Investigator
  
  Uchidate Michimasa
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Iwate University
Research on statistical modeling of surface texture for optimum tribo-surfacePrincipal Investigator
- Principal Investigator
  
  Uchidate Michimasa
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Iwate University
Qualitative assessment of tribo-electrochemical dissolution for the metal based aqua-drive systemPrincipal Investigator
- Principal Investigator
  
  UCHIDATE Michimasa
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Iwate University
Manufacture of calibration and measurement surface standards for areal surface texture measuring instruments and their international standardization
- Principal Investigator
  
  YANAGI Kazuhisa
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagaoka University of Technology
Development of surface creation techniques by texturing for improvement of Tribological properties
- Principal Investigator
  
  IWABUCHI Akira
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Iwate University

[Journal Article] Evaluation of 3-D Surface Textures Based on Contact Asperities and Application to CVT Pulley Surfaces2024
- Author(s)
  M. Uchidate
- Journal Title
  
  Tribology Online
  
  Volume: 19 Issue: 2 Pages: 130-137
- DOI
  10.2474/trol.19.130
- ISSN
  1881-218X, 1881-2198
- Year and Date
  2024-04-30
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-21K03828
[Journal Article] Comparison of contact conditions obtained by direct simulation with statistical analysis - Normally distributed isotropic surfaces -2018
- Author(s)
  Michimasa Uchidate
- Journal Title
  
  Surface Topography: Metrology and Properties
  
  Volume: 印刷中 Issue: 3 Pages: 034003-034003
- DOI
  10.1088/2051-672x/aac072
- NAID
  130007068468
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05751
[Journal Article] 溶融アルミニウムめっき鋼板のリチウムイオン二次電池用集電体としての可能性2016
- Author(s)
  小浦節子, 辻村太佳夫, 佐々木悟, 阿部孝裕, 多田有矢, 工藤尚範, 齋藤良平, 内舘道正, 門磨義浩, 宇井幸一
- Journal Title
  
  表面技術
  
  Volume: 67 Pages: 316-321
- NAID
  130005686070
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05751
[Journal Article] Study on Corrosive Wear of Co-Cr-Mo Alloy in Decomposed Gas from ETFE and PPS for Injection Molding Application2016
- Author(s)
  M. Uchidate, A. Iwabuchi, K. Yanagihara, K. Sekine, H. Hirahara
- Journal Title
  
  Tribology Online
  
  Volume: 11 Issue: 4 Pages: 540-546
- DOI
  10.2474/trol.11.540
- NAID
  130005263028
- ISSN
  1881-218X, 1881-2198
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05751
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2011
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, A. Iwabuchi
- Journal Title
  
  Wear
  
  Volume: 271 Pages: 565-570
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760109
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2011
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, A. Iwabuchi
- Journal Title
  
  Wear
  
  Volume: 271 Pages: 565-570
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2011
- Author(s)
  M.Uchidate, K.Yanagi, I.Yoshida, T.Shimizu, A.Iwabuchi
- Journal Title
  
  Wear
  
  Volume: (印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760109
[Journal Article] Generation of 3-D random topography datasets with periodic bound-aries for surface metrology algorithms and measurement standards2011
- Author(s)
  M.Uchidate
- Journal Title
  
  Wear
  
  Volume: 271 Issue: 3-4 Pages: 565-670
- DOI
  10.1016/j.wear.2010.04.035
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760109, KAKENHI-PROJECT-21360062
[Journal Article] 面領域の表面性状測定機を対象とした測定標準に関する研究-第1報粗さ測定用標準面の設計-2010
- Author(s)
  根本賢太郎、柳和久、明田川正人、内舘道正、吉田一朗
- Journal Title
  
  精密工学会誌 76, 3
  
  Pages: 349-353
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2010
- Author(s)
  M.Uchidate, K.Yanagi, I.Yoshida, T.Shimizu, A.Iwabuchi
- Journal Title
  
  Wear (掲載確定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2010
- Author(s)
  M.Uchidate, K.Yanagi, I.Yoshida, T.Shimizu, A.Iwabuchi
- Journal Title
  
  Wear Special Issue
  
  Volume: doi:10.1016/j.wear.2010.04.035 Pages: 1-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] 面領域の表面性状測定機を対象とした測定標準に関する研究-第1報粗さ測定用標準面の設計-2010
- Author(s)
  根本賢太郎、柳和久、明田川正人、内舘道正、吉田一朗
- Journal Title
  
  精密工学会誌
  
  Volume: 76, 3 Pages: 349-353
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Development of a roughness measurement standard with irregular surface topography for improving 3D surface texture measurement2009
- Author(s)
  K.Nemoto, K.Yanagi, M.Aketagawa, I.Yoshida, M.Uchidate, T.Miyaguchi, H.Maruyama
- Journal Title
  
  Measurement Science and Technology MST 20 Online
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Research on the Validity of using Nayak's Theory for Summit Parameters of Discrete Isotropic Gaussian Surfaces2009
- Author(s)
  M.Uchidate, A.Iwabuchi, K.Kikuchi, T.Shimizu
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing 3
  
  Pages: 125-135
- NAID
  130000127769
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] Development of a roughness measurement standard with irregular surface topography for improving 3D surface texture measurement2009
- Author(s)
  Kentaro Nemoto, Kazuhisa Yanagi, Masato Aketagawa, Ichiro Yoshida, Michimasa Uchidate, Takashi Miyaguchi and Hideki Maruyama
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 20
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Research on the Validity of using Nayak's Theory for Summit Parameters of Discrete Isotropic Gaussian Surfaces2009
- Author(s)
  M. Uchidate, A. Iwabuchi, K. Kikuchi, T. Shimizu
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing 3, 2
  
  Pages: 125-135
- NAID
  130000127769
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] Nano-Indentation Measurement of the Tribo? Layer on Stainless Steel and Brass Surfaces Rubbed against DLC in Water2008
- Author(s)
  M. Uchidate, A. Iwabuchi, T. Kanno and H. Liu
- Journal Title
  
  Tribology Online 3巻
  
  Pages: 48-53
- NAID
  130000067112
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] A study on surface material measures for areal surface texture measuring instruments2008
- Author(s)
  K. Nemoto, K. Yanagi, M. Aketagawa, D. Kanda, I. Yoshida, M. Uchidate
- Journal Title
  
  Key Engineering Materials 381-382
  
  Pages: 241-244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] A study on surface material measures for areal surface text ure measuring instruments2008
- Author(s)
  K. Nemoto, K. Yanagi, M. A ketagawa, D. Kanda, T. Yos hida and M. Uchidate
- Journal Title
  
  Key Engineering Materials 381
  
  Pages: 241-249
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] Nano-Indentation Measurement of the Tribo-Layer on Stainless Steel and Brass Surfaces Rubbed against DLC in Water2008
- Author(s)
  M.Uchidate, A. Iwabuchi, T. Kanno, H. Liu
- Journal Title
  
  Tribology Online 3, 2
  
  Pages: 48-53
- NAID
  130000067112
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, A. Iwabuchi
- Journal Title
  
  Wear (in Press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] Development of Estimation Program for EHL Film Thickness Based on Lubrication Regimes and Film Thickness Formulae with Physical EHL2023
- Author(s)
  T. Asari and M. Uchidate
- Organizer
  ITC Fukuoka 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03828
[Presentation] Robust Evaluation of Skewness and Kurtosis using Probability Density Functions2023
- Author(s)
  H. Matsushima and M. Uchidate
- Organizer
  ITC Fukuoka 2023
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21K03828
[Presentation] ロバストガウシアン回帰フィルタの出力に及ぼす重み因子と終了条件の影響2022
- Author(s)
  髙梨椋平，内舘道正
- Organizer
  トライボロジー会議2022 秋福井
- Data Source
  KAKENHI-PROJECT-21K03828
[Presentation] 鉄系鋳造材料の人工海水中における腐食摩耗特性2021
- Author(s)
  小島悠人，内舘道正
- Organizer
  トライボロジー会議2021 秋松江 (2021)
- Data Source
  KAKENHI-PROJECT-18K03902
[Presentation] Robust Evaluation Method of Skewness and Kurtosis based on Probability Density Functions2019
- Author(s)
  M. Uchidate, Y. Sasaki, K. Narita
- Organizer
  22nd International Conference on Metrology and Properties of Surfaces
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03902
[Presentation] Robust Evaluation Method of Skewness and Kurtosis based on Probability Density Functions2019
- Author(s)
  Michimasa Uchidate, Yutaka Sasaki, Kento Narita
- Organizer
  2nd International Conference on Metrology and Properties of Surfaces
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03902
[Presentation] Rough Contact Analysis based on Boundary Element Method (BEM)2019
- Author(s)
  Michimasa Uchidate
- Organizer
  Japan-Taiwan Tribology Symposium 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03902
[Presentation] Robust Evaluation Method of Skewness and Kurtosis Using Probability Density Functions2019
- Author(s)
  Michimasa Uchidate, Yutaka Sasaki, Kento Narita
- Organizer
  International Tribology Conference (ITC)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03902
[Presentation] Water-repellent textured surfaces produced by injection moulding using laser textured moulds2018
- Author(s)
  M. UCHIDATE, A. YOSHIDA, Y. SHIRAKAWABE, T TAMURA
- Organizer
  ASIATRIB 2018
- Data Source
  KAKENHI-PROJECT-18K03902
[Presentation] 三次元表面性状パラメータを用いた統計理論に基づく接触解析と直接計算の比較2017
- Author(s)
  内舘道正
- Organizer
  トライボロジー会議2017秋高松
- Data Source
  KAKENHI-PROJECT-15K05751
[Presentation] Comparison of contact conditions obtained by direct simulation with statistical analysis - Normally distributed isotropic surfaces -2017
- Author(s)
  Michimasa Uchidate
- Organizer
  16th International Conference on Metrology and Properties of Engineering Surfaces
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05751
[Presentation] レーザ加工された金型によるプラスチック成形品への撥水性付与2017
- Author(s)
  内舘道正，吉田敦，白川部祐太，田村孝
- Organizer
  トライボロジー会議2017秋高松
- Data Source
  KAKENHI-PROJECT-15K05751
[Presentation] Comparison of contact conditions obtained by direct simulation with statistical analysis2017
- Author(s)
  Michimasa Uchidate
- Organizer
  The 16'th International Conference on Metrology and Properties of Engineering Surfaces
- Place of Presentation
  Clarion HOTEL POST(Gothenburg, Sweden)
- Year and Date
  2017-06-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05751
[Presentation] 直接シミュレーションによる接触状態と統計解析の比較（正規分布等方性表面の場合）2016
- Author(s)
  内舘道正
- Organizer
  日本機械学会2016年度年次大会
- Place of Presentation
  九州大学伊都キャンパス（福岡県福岡市）
- Year and Date
  2016-09-11
- Data Source
  KAKENHI-PROJECT-15K05751
[Presentation] 表面凹凸と表面性状の学術的アプローチ2016
- Author(s)
  内舘道正
- Organizer
  にいがたナノ基盤技術実践会講演会
- Place of Presentation
  ホテルニューオータニ長岡（新潟県長岡市）
- Year and Date
  2016-03-10
- Invited
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] 直接シミュレーションによる接触状態と統計解析の比較（正規分布等方性表面の場合）2016
- Author(s)
  内舘道正
- Organizer
  日本機械学会全国大会
- Place of Presentation
  九州大学（福岡県福岡市）
- Year and Date
  2016-09-11
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] 己相関係数のべき乗係数が表面性状と接触状態に及ぼす影響2015
- Author(s)
  内舘道正
- Organizer
  日本トライボロジー学会トライボロジー会議　2015春姫路
- Place of Presentation
  姫路商工会議所（兵庫県姫路市）
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] Sn/Ag系多層めっきの表面性状評価2014
- Author(s)
  内舘道正，呉松竹，鈴木映一，内藤智之，細貝拓也，叶栄彬，八代仁
- Organizer
  トライボロジー会議2014 秋福岡
- Place of Presentation
  東京都渋谷区代々木　国立オリンピックセンター
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] Evaluation of 3-D Surface Texture based on Contact Asperities2013
- Author(s)
  Michimasa Uchidate
- Organizer
  14th Internatioal Conference on Metrology and Properties of Engineering Surfaces
- Place of Presentation
  Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] Study on Rough Surface Contact Using a Direct2013
- Author(s)
  Michimasa Uchidate, Akira Iwabuchi, Tomoharu Shimizu
- Organizer
  5th World Tribology Congress 2013
- Place of Presentation
  Torino, Italy
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] 直接シミュレーションを用いた等方性・正規分布テクスチャが接触状態に与える影響の検討2013
- Author(s)
  内舘道正，猪股雄太，清水友治，岩渕明
- Organizer
  トライボロジー会議2013 秋福岡
- Place of Presentation
  福岡県福岡市アクロス福岡
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] 接触突起に基づく三次元表面テクスチャの評価手法2011
- Author(s)
  内舘道正
- Organizer
  本機械学会2011年度年次大会
- Place of Presentation
  東京工業大学(東京都)
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] Evaluation of Nuclear Power Station Steam Pipe Thinning Phenomenon by Impact Fretting Experiment2011
- Author(s)
  Yoshiki Sato, Michimasa Uchidate, et al.
- Organizer
  International Tribology Conference, Hiroshima
- Place of Presentation
  広島国際会議場(広島県)
- Year and Date
  2011-11-01
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] High Temperature Impact-Fretting Experiment for Understanding of Repassivation Kinetics of Steels2011
- Author(s)
  Michimasa Uchidate
- Organizer
  STLE 66^<th> Annual Meeting
- Place of Presentation
  Hilton Atlanta (Atlanta, USA)
- Year and Date
  2011-05-16
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] High Temperature Impact-Fretting Experiment for Understanding of Repassivation Kinetics of Steels2011
- Author(s)
  M. Uchidate, Y. Sato, A. Iwabuchi and H. Yashiro
- Organizer
  STLE Annual Meeting
- Place of Presentation
  Atlanta, USA
- Year and Date
  2011-05-16
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] Evaluation of 3-D Surface Texture Based on Contact Asperities2011
- Author(s)
  Michimasa Uchidate
- Organizer
  International Tribology Conference, Hiroshima
- Place of Presentation
  広島国際会議場(広島県)
- Year and Date
  2011-11-02
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] Modelling of Tribocorrosion by using a Direct Simulation2010
- Author(s)
  M. Uchidate, A. Iwabuchi, T. Shimizu, A. Chida, and R. J. K. Wood
- Organizer
  51st Corrosion Science Symposium
- Place of Presentation
  Southampton, UK
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] Modelling of Tribocorrosion by using a Direct Simulation2010
- Author(s)
  M.Uchidate
- Organizer
  51st Corrosion Science Symposium
- Place of Presentation
  United Kingdom, Southampton
- Year and Date
  2010-09-03
- Data Source
  KAKENHI-PROJECT-22760109
[Presentation] 表面粗さの自己相関モデルの拡張2009
- Author(s)
  内舘道正
- Organizer
  日本トライボロジー学会
- Place of Presentation
  国立オリンピック記念青少年総合センター(東京都)
- Year and Date
  2009-05-18
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] 金型材における表面テクスチャの影響2009
- Author(s)
  金起賢, 岩渕明, 内舘道正
- Organizer
  日本トライボロジー学会
- Place of Presentation
  国立オリンピック記念青少年総合センター
- Year and Date
  2009-05-18
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] 表面粗さの自己相関モデルの拡張2009
- Author(s)
  内舘道正, 清水友治, 熊野大介, 岩渕明
- Organizer
  日本トライボロジー学会
- Place of Presentation
  国立オリンピック記念青少年総合センター
- Year and Date
  2009-05-18
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2009
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, and A. Iwabuchi
- Organizer
  Proc. of 12th Int. Conf. on Metrology & Properties of Engineering Surfaces
- Place of Presentation
  Rzeszow, Poland
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2009
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, A. Iwabuchi
- Organizer
  12th International Conference on Metrology and Properties of Engineering Surfaces
- Place of Presentation
  Rzeszow, Poland
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] Generation of 3-D random topography datasets with periodic boundaries for surface metrology and measurement standards2009
- Author(s)
  M.Uchidate, K.Yanagi, I.Yoshida, T.Shimizu, A.Iwabuchi
- Organizer
  12^<th> Int.Conf.on Metrology & Properties of Engineering Surfaces
- Place of Presentation
  Rzeszow University of Technology, Poland
- Year and Date
  2009-07-09
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] Tribological Effect of Surface Texturing on Die Materials for Practical Application2009
- Author(s)
  K. Kim, A. Iwabuchi, M. Uchidate
- Organizer
  WTC Kyoto 2009
- Place of Presentation
  Kyoto, 京都国際会館
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] ファイバーレーザーと放電加工による表面テクスチャリングの摩擦係数への影響2008
- Author(s)
  金起賢, 岩渕明, 内舘道正
- Organizer
  日本トライボロジー学会トライボロジー会議秋
- Place of Presentation
  名城大学・名古屋
- Year and Date
  2008-09-16
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] ファイバーレーザーと放電加工による表面テクスチャリングの摩擦係数への影響2008
- Author(s)
  金起賢, 岩渕明, 内舘道正
- Organizer
  日本トライボロジー学会
- Place of Presentation
  名古屋・名城大学
- Year and Date
  2008-09-16
- Data Source
  KAKENHI-PROJECT-19360068
[Presentation] Tribocorrosion characteristics of Co-Cr-Mo alloy in decomposed gases from molten plastics for injection molding application
- Author(s)
  内舘道正
- Organizer
  International Tribology Conference 2015 Tokyo
- Place of Presentation
  東京都葛飾区
- Year and Date
  2015-09-16 – 2015-09-20
- Data Source
  KAKENHI-PROJECT-25820029
[Presentation] 自己相関係数のべき乗係数が表面性状と接触状態に及ぼす影響
- Author(s)
  内舘道正
- Organizer
  トライボロジー会議2015 春姫路
- Place of Presentation
  兵庫県姫路市
- Year and Date
  2015-05-27 – 2015-05-30
- Data Source
  KAKENHI-PROJECT-25820029

1. IWABUCHI Akira (00005555)

# of Collaborated Projects: 2 results

# of Collaborated Products: 16 results
2. YANAGI Kazuhisa (80108216)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
3. AKETAGAWA Masato (10231854)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
4. TANAKA Hidetake (10422651)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. FUKATSU Hiroya (80228866)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 佐藤善紀 (20739362)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

UCHIDATE Michimasa 内舘 道正

Uchidate Michimasa 内舘 道正

Research Projects

Research Products

Co-Researchers

新規国際規格に基づく表面性状評価法の互換性評価Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

新規国際標準規格に基づく表面性状評価手法の確立Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Modelling of tirobocorrosion in a microscopic scalePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Robust Estimation of the Areal Texture Parameters using the Pearson Distribution SystemPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on statistical modeling of surface texture for optimum tribo-surfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Qualitative assessment of tribo-electrochemical dissolution for the metal based aqua-drive systemPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Manufacture of calibration and measurement surface standards for areal surface texture measuring instruments and their international standardization

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of surface creation techniques by texturing for improvement of Tribological properties

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Evaluation of 3-D Surface Textures Based on Contact Asperities and Application to CVT Pulley Surfaces2024

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Comparison of contact conditions obtained by direct simulation with statistical analysis - Normally distributed isotropic surfaces -2018

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] 溶融アルミニウムめっき鋼板のリチウムイオン二次電池用集電体としての可能性2016

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Study on Corrosive Wear of Co-Cr-Mo Alloy in Decomposed Gas from ETFE and PPS for Injection Molding Application2016

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

UCHIDATE Michimasa 内舘道正

Uchidate Michimasa 内舘道正

[Journal Article] 面領域の表面性状測定機を対象とした測定標準に関する研究-第1報粗さ測定用標準面の設計-2010