Furushima Tsuyoshi 古島剛

… Alternative Names

FURUSHIMA Tsuyoshi 古島剛

Less

Researcher Number	30444938
Other IDs
Affiliation (Current)	2025: 東京大学, 生産技術研究所, 准教授
Affiliation (based on the past Project Information) *help	2016 – 2022: 東京大学, 生産技術研究所, 准教授 2015: 首都大学東京, 大学院理工学研究科, 助教 2010 – 2015: 首都大学東京, 理工学研究科, 助教 2012: 首都大学東京, 大学院・理工学研究科, 助教 2007 – 2008: 首都大学東京, 大学院・理工学研究科, 助教 2007 – 2008: Tokyo Metropolitan University, 理工学研究科, 助教
Review Section/Research Field	Principal Investigator Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments / Material processing/Microstructural control engineering / Medium-sized Section 26:Materials engineering and related fields / Material processing/Microstructural control engineering / Materials/Mechanics of materials Except Principal Investigator Material processing/treatments / Material processing/Microstructural control engineering
Keywords	Principal Investigator ダイレス引抜き / マイクロ加工 / マグネシウム合金 / 非一様場 / 結晶組織制御 / 塑性加工 / その場観察 / 破壊 / 塑性変形 / 超塑性 … More / ECAP / 生体材料 / マグネシウム / マグネシウム合金管 / 生体吸収性材料 / 導電性 / ライフセルアトラス / 金属マイクロニードル / 超塑性変形 / 変形の可視化 / 金属箔材 / 塑性工学 / 二軸応力状態 / レーザスペックルパターン / マイクロ塑性加工 / 延性破壊 / 可視化 / 表面あれ / セラミックス / 燃料電池 / セラミック / ナノインデンテーション / 硬さ試験 / 不均質性 / 微小硬さ試験 / マイクロ塑性流動 / FEM / 表面粗さ / マイクロチューブ / メゾスコピック解析 / in-situ観察 / マイクロダイレス加工 / 有限要素解析 / メゾスコピック変形機構 / 自由表面あれ … More Except Principal Investigator ねじり / 加工条件 / 組織制御 / 結晶粒微細化 / FEM / 超塑性 / ダイレス引抜き / マイクロチューブ / 寸法効果 / 逐次変形 / 超深絞り / 再絞り / 材料流動制御 / 逐次成形 / プレスモーション / 超高圧 / マイクロ超深絞り / 対向液圧深絞り / マイクロフォーミング / 酸化膜 / 加工熱処理 / 機械的性質 / 多パス / 外径変動 / 酸化 / 熱援用引抜き / 外径精度 / 表面あれ / マルチパス / 引抜き限界 / 熱援用加工 / マグネシウム合金管 / 繰返し塑性変形 / 回転曲げ / 強変形 / 金属管 / 伝熱 / 幾何学的相似変形原理 / 集合管 / 異形管 Less

Development of new microstructure control method based on visualization of plastic deformation under non-uniform temperature strain rate fieldsPrincipal Investigator
- Principal Investigator
  
  古島剛
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Fund for the Promotion of Joint International Research (Fostering Joint International Research (A))
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  The University of Tokyo
Fabrication of Conductive Metallic Micro needles by Superplastic Deformation and Its Fracture for Medical and Biochemical ApplicationsPrincipal Investigator
- Principal Investigator
  
  FURUSHIMA TSUYOSHI
- Project Period (FY)
  2020 – 2021
- Research Category
  
  Grant-in-Aid for Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 26:Materials engineering and related fields
- Research Institution
  The University of Tokyo
Microstructure control of magnesium alloy by dieless drawing with non-uniform temperature and strain ratePrincipal Investigator
- Principal Investigator
  
  Furushima Tsuyoshi
- Project Period (FY)
  2019 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  The University of Tokyo
Novel Micro Fabrication Technique of Mg Alloys and Its Application to Micro FormingPrincipal Investigator
- Principal Investigator
  
  古島剛
- Project Period (FY)
  2017
- Research Category
  
  Grant-in-Aid for JSPS Fellows
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  The University of Tokyo
In-situ observation with laser of surface roughening and fracture behaviors for thin-metal foils under bi-axial tensile statePrincipal Investigator
- Principal Investigator
  
  FURUSHIMA Tsuyoshi
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  The University of Tokyo
Development of warm micro ultra deep drawing process based on blank material flow control with press motion and ultra high fluid pressure
- Principal Investigator
  
  MANABE Ken-ichi
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Fabrication of high grade medical microtubes with microstructure control in superplastic dieless drawing process
- Principal Investigator
  
  MANABE Ken-ichi
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University
Fabrication of ceramic micro tube for solid-oxide fuel cell using superplastic dieless drawing processPrincipal Investigator
- Principal Investigator
  
  FURUSHIMA Tsuyoshi
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University
Development of Novel Cyclic Rotating Bending Process for Control of Microstructure and Grain Refinement of Metal Tubes
- Principal Investigator
  
  MANABE Kenichi
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University
Evaluation of Micro Plastic Characteristic of Metals by Micro Indentation for Precise Analysis on Metal FormingPrincipal Investigator
- Principal Investigator
  
  FURUSHIMA Tsuyoshi
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University
Mesoscopic Deformation Behavior and In-situ Observation of Free Surface Roughening in Micro FormingPrincipal Investigator
- Principal Investigator
  
  FURUSHIMA Tsuyoshi
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo Metropolitan University
Development of creation method of extra fine strange appearance set microtube using minute crystal superplasticity
- Principal Investigator
  
  MANABE Kenichi
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University

[Journal Article] Effect of microstructure on outer surface roughening of magnesium alloy tubes in die-less mandrel drawing2022
- Author(s)
  Kishimoto Takuma、Du Peihua、Furushima Tsuyoshi
- Journal Title
  
  Journal of Magnesium and Alloys
  
  Volume: 10 Issue: 10 Pages: 2730-2744
- DOI
  10.1016/j.jma.2022.02.001
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02476
[Journal Article] Continuous observation of twinning and dynamic recrystallization in ZM21 magnesium alloy tubes during locally heated dieless drawing2022
- Author(s)
  Du Peihua、Furusawa Shusaku、Furushima Tsuyoshi
- Journal Title
  
  Journal of Magnesium and Alloys
  
  Volume: 10 Issue: 3 Pages: 730-742
- DOI
  10.1016/j.jma.2021.06.001
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02476
[Journal Article] High-Temperature Tensile Testing of Micro-scaled Metal Foils Using Rectangular Samples by Resistance Heating-Assisted System Incorporating Digital Image Correlation with Laser Speckles2022
- Author(s)
  Zheng Qiu、Furushima Tsuyoshi
- Journal Title
  
  Journal of Materials Engineering and Performance
  
  Volume: - Issue: 19 Pages: 8767-8774
- DOI
  10.1007/s11665-022-07758-5
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02476
[Journal Article] Evaluation of high-temperature tensile behavior for metal foils by a novel resistance heating assisted tensile testing system using samples with optimized structures2021
- Author(s)
  Zheng Qiu、Furushima Tsuyoshi
- Journal Title
  
  Journal of Materials Science & Technology
  
  Volume: 94 Pages: 216-229
- DOI
  10.1016/j.jmst.2021.03.061
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K21074, KAKENHI-PROJECT-19H02476
[Journal Article] Enhancement of uniform plastic deformation for pure titanium foils by applying pre-strain combining with resistance heating method for microforming2020
- Author(s)
  Zheng Qiu、Furushima Tsuyoshi
- Journal Title
  
  Journal of Materials Research and Technology
  
  Volume: 9 Issue: 6 Pages: 12685-12696
- DOI
  10.1016/j.jmrt.2020.08.108
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02476
[Journal Article] Microstructure and performance of biodegradable magnesium alloy tubes fabricated by local-heating-assisted dieless drawing2020
- Author(s)
  Du Peihua、Furusawa Shusaku、Furushima Tsuyoshi
- Journal Title
  
  Journal of Magnesium and Alloys
  
  Volume: 8 Issue: 3 Pages: 614-623
- DOI
  10.1016/j.jma.2020.05.009
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02476
[Journal Article] ひずみ誘起自由表面あれ進展挙動の共焦点レーザ顕微鏡下その場観察装置の開発2019
- Author(s)
  古島剛，廣瀬雄太郎
- Journal Title
  
  銅と銅合金
  
  Volume: 58
- NAID
  40021983452
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06800
[Journal Article] Identification of an Empirical Equation for Predicting Free Surface Roughness Evolution in Thin Sheets of Aluminum Alloy and Pure Copper2018
- Author(s)
  T. Furushima, H. Sato, K. Manabe, S. Alexandrov
- Journal Title
  
  Journal of Manufacturing Science and Engineering
  
  Volume: 140 Issue: 3
- DOI
  10.1115/1.4038822
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Journal Article] Fracture and surface roughening behaviors in micro metal forming2018
- Author(s)
  T. Furushima, H. Tsunezaki, Y. Hirose
- Journal Title
  
  Procedia Manufacturing
  
  Volume: 15 Pages: 1481-1486
- DOI
  10.1016/j.promfg.2018.07.331
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16K06800
[Journal Article] Development of In-situ Observation Methods of Surface Roughening Behavior By Hand-size Stretching Test for Metal Foils2018
- Author(s)
  T. Furushima, Y. Hirose
- Journal Title
  
  Journal of Physics: Conference Series
  
  Volume: 1063 Pages: 012130-012130
- DOI
  10.1088/1742-6596/1063/1/012130
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Journal Article] A new constitutive analysis of hexagonal close-packed metal in equal channel angular pressing by crystal plasticity finite element method2018
- Author(s)
  H. Li, A. Ochsner, P. K.D.V. Yarlagadda, Y. Xiao, T. Furushima, D. Wei, Z. Jiang, K. Manabe
- Journal Title
  
  Continuum Mechanics and Thermodynamics
  
  Volume: 30 Issue: 1 Pages: 69-82
- DOI
  10.1007/s00161-017-0583-9
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17F16718
[Journal Article] Deformation-induced surface roughening of an Al-Mg alloy2018
- Author(s)
  P. Knysh, K. Sasaki, T. Furushima, M. Knezevic, Y.P. Korkolis
- Journal Title
  
  Journal of Physics: Conference Series
  
  Volume: 1063 Pages: 012132-012132
- DOI
  10.1088/1742-6596/1063/1/012132
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Journal Article] Development of Compact Marchiniak Testing Apparatus for In-situ Microscopic Observation of Surface Roughening2017
- Author(s)
  Furushima Tsuyoshi, Hirose Yutaro, Tada Kazuo, Manabe Ken-ichi
- Journal Title
  
  Procedia Engineering
  
  Volume: 207 Pages: 1946-1951
- DOI
  10.1016/j.proeng.2017.10.966
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16K06800
[Journal Article] Development of Rotary Laser Dieless Drawing Apparatus for Metal Microtubes2015
- Author(s)
  Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa and Ken-ichi Manabe
- Journal Title
  
  Key Engineering Materials
  
  Volume: 626 Pages: 372-276
- DOI
  10.4028/www.scientific.net/kem.626.372
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360310, KAKENHI-PROJECT-24560888
[Journal Article] Fabrication of noncircular multicore microtubes by superplastic dieless drawing process2014
- Author(s)
  T. Furushima, A. Shirasaki, K. Manabe
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 214 Issue: 1 Pages: 29-35
- DOI
  10.1016/j.jmatprotec.2013.07.005
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360310, KAKENHI-PROJECT-24560888
[Journal Article] Deformation Profile in Rotary Laser Dieless Drawing Process for Metal Microtubes2014
- Author(s)
  Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa, Ken-ichi Manabe
- Journal Title
  
  Procedia Engineering
  
  Volume: 81 Pages: 700-705
- DOI
  10.1016/j.proeng.2014.10.063
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360310
[Journal Article] Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube2013
- Author(s)
  Z.C.Zhang, K. Manabe, T. Furushima and K. Tada
- Journal Title
  
  Advanced Materials Research
  
  Volume: 652-654 Pages: 1956-1960
- DOI
  10.4028/www.scientific.net/amr.652-654.1956
- Data Source
  KAKENHI-PROJECT-23656468
[Journal Article] Real-Time Process Control System of Dieless Tube Drawing with an Image Processing Approach2012
- Author(s)
  S. Supriadi, T. Furushima,_K. Manabe
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 53 Issue: 5 Pages: 862-869
- DOI
  10.2320/matertrans.MF201118
- NAID
  130004824867
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360310, KAKENHI-PROJECT-24560888
[Journal Article] Workability of AZ31 Magnesium Alloy Tubes in Dieless Drawing Process2012
- Author(s)
  T. Furushima, K. Manabe
- Journal Title
  
  Steel Research International
  
  Pages: 851-854
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360310
[Journal Article] Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening2011
- Author(s)
  T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
- Journal Title
  
  Advanced Materials Research
  
  Volume: 418-420 Pages: 1040-1043
- Data Source
  KAKENHI-PROJECT-22760563
[Journal Article] Prediction of Free Surface Roughening by 2D and 3D Model Considering Material Inhomogeneity2011
- Author(s)
  T.Furushima, T.Masuda, K.Manabe, S.Alexandrov
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 5 Issue: 12 Pages: 978-990
- DOI
  10.1299/jmmp.5.978
- NAID
  130002072407
- ISSN
  1880-9871
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760563
[Journal Article] Prediction of Free Surface Roughening by 2D and 3D Model Considering Material Inhomogeneity2011
- Author(s)
  T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: Vol.5, No.12 Pages: 978-990
- NAID
  130002072407
- Data Source
  KAKENHI-PROJECT-22760563
[Journal Article] Study on Size Effect in Micro Cross Wedge Rolling2011
- Author(s)
  H.N.Lu, D.B.Wei, Z.Y.Jiang, K.Manabe, T.Furushima
- Journal Title
  
  Steel research International
  
  Volume: 82, Special edition Pages: 962-967
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760563
[Journal Article] Study on Size Effect in Micro Cross Wedge Rolling2011
- Author(s)
  H. N. Lu, D. B. Wei, Z. Y. Jiang, K. Manabe, T. Furushima
- Journal Title
  
  Steel research International
  
  Volume: 82 Pages: 962-967
- Data Source
  KAKENHI-PROJECT-22760563
[Journal Article] In-situ Observation and Anisotropy of Free Surface Roughening for Polycrystalline Metals2010
- Author(s)
  T. Furushima, T. Masuda, K. Manabe
- Journal Title
  
  Key Engineering Materials
  
  Volume: 443 Pages: 450-455
- Data Source
  KAKENHI-PROJECT-22760563
[Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2009
- Author(s)
  Tsuyoshi Furushima, Syuhei Hirose, Ken-ichi Manabe
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 3
  
  Pages: 236-246
- NAID
  130000667657
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2009
- Author(s)
  Tsuyoshi Furushima, Syuhei Hirose and Ken-ichi Manabe
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 3
  
  Pages: 236-246
- NAID
  130000667657
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] FE Analysis of Size Effect on Deformation and Heat Transfer Behavior in Microtube Dieless Drawing2008
- Author(s)
  T. FURUSHIMA and K. MANABE
- Journal Title
  
  Journal of Materials Processing Technology 201
  
  Pages: 123-127
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2008
- Author(s)
  Tsuyoshi Furushima, Syuhei Hirose, Ken-ichi Manabe
- Journal Title
  
  Proc. 3rd JSME/ASME International Conference on Materials and Processing(ICM&P 2008) CD-ROM
- NAID
  130000667657
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] FE Analysis of Size Effect on Deformation and Heat Transfer Behavior in Microtube Dieless Drawing2008
- Author(s)
  T. Furushima, K. Manabe
- Journal Title
  
  Journal of Materials Processing Technology 201
  
  Pages: 123-127
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes2008
- Author(s)
  Tsuyoshi Furushima, Syuhei Hirose, Ken-ichi Manabe
- Journal Title
  
  Proc. 3rd JSME/ASME International Conference on Materials and Processing (ICM&P 2008) (CD-ROM)
- NAID
  130000667657
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] A Novel Processing for Microtubes - Superplastic Dieless Drawing Technique -2008
- Author(s)
  Tsuyoshi Furushima, Ken-ichi Manabe
- Journal Title
  
  Proc. 9^<th>International Conference on Technology of Plasticity (9th ICTP 2008) (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] A Novel Processing for Microtubes-Superplastic Dieless Drawing Technique-2008
- Author(s)
  Tsuyoshi Furushima and Ken-ichi Manabe
- Journal Title
  
  Proc.9^<th> International Conference on Technology of Plasticity(9th ICTP 2008) (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental study on multi-pass dieless drawing process of superplastic Zn-22%Al alloy microtubes2007
- Author(s)
  T. Furushima and K. Manabe
- Journal Title
  
  Journal of Materials Processing Technology 187-188
  
  Pages: 236-240
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] FE ANALYSIS OF SIZE EFFECT ON DEFORMATION AND HEAT TRANSFER BEHAVIOR IN MICROTUBE DIELESS DRAWING2007
- Author(s)
  T. Furushima and K. Manabe
- Journal Title
  
  Proceedings of the 10th Advances in Materials and Processing Technologies
  
  Pages: 275-283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] ダイレス引抜き加工の内面溝付銅管への適用2007
- Author(s)
  古島剛、真鍋健一、新井淳、石橋明彦、日名子伸明、白井崇
- Journal Title
  
  銅と銅合金 46巻
  
  Pages: 111-115
- NAID
  40015603489
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental study on multi-pass dieless drawing process of superplastic Zn-22% Al alloy microtubes2007
- Author(s)
  T. Furushima and K. Manabe
- Journal Title
  
  Journal of Materials Processing Technology 187-188
  
  Pages: 236-240
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] ダイレス引抜き加工の内面溝付銅管への適用2007
- Author(s)
  古島剛、真鍋健一、新井淳、石橋明彦、日名子伸明、白井崇
- Journal Title
  
  銅と銅合金 46
  
  Pages: 111-115
- NAID
  40015603489
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental Study on Multi-Pass Dieless Drawing Process of Superplastic Zn-22%Al Alloy Microtubes2007
- Author(s)
  T. Furushima and K. Manabe
- Journal Title
  
  J. Mater. Proc. Technol. Vol. 187-188
  
  Pages: 236-240
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760072
[Journal Article] ひずみ速度感受性の温度依存性を考慮した超塑性ダイレスチューブ引抜きの熱-変形連成FEM解析2007
- Author(s)
  古島剛, 真鍋健一
- Journal Title
  
  日本塑性加工学会誌(塑性と加工) 第48巻・552号
  
  Pages: 51-55
- NAID
  10018287859
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental and numerical study on deformation behavior in dieless drawing process of superplastic microtubes2007
- Author(s)
  T.FURUSHIMA and K. MANABE
- Journal Title
  
  Journal of Materials Processing Technology 191
  
  Pages: 59-63
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental and numerical study on deformation behavior in dieless drawing process of superplastic microtubes2007
- Author(s)
  T. FURUSHIMA and K. MANABE
- Journal Title
  
  Journal of Materials Processing Technology 191
  
  Pages: 59-63
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental and numerical study on deformation behavior in dieless drawing process of superlastic microtubes2007
- Author(s)
  T.FURUSHIMA and K.MANABE
- Journal Title
  
  Jounal of Materials Processing Technology 191
  
  Pages: 59-63
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760072
[Journal Article] Experimental and Numerical Study on Deformation Behavior in Dieless Drawing Process of Superplastic Microtubes2007
- Author(s)
  T. Furushima, K. Manabe
- Journal Title
  
  J. Mater. Proc. Technol. Vol. 191
  
  Pages: 59-63
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760072
[Journal Article] アルミ二ウム合金押出異形中空形材のダイレス引抜き2007
- Author(s)
  古島剛、真鍋健一
- Journal Title
  
  第57巻
  
  Pages: 351-356
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] ひずみ速度感受性の温度依存性を考慮した超塑性ダイレスチューブ引抜きの熱-変形連成FEM 解析2007
- Author(s)
  古島剛、真鍋健一
- Journal Title
  
  日本塑性加工学会誌(塑性と加工) 第48巻552号
  
  Pages: 51-55
- NAID
  10018287859
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] アルミニウム合金押出異形中空形材のダイレス引抜き2007
- Author(s)
  古島剛、真鍋健一
- Journal Title
  
  軽金属第57巻
  
  Pages: 351-356
- NAID
  10019520642
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] Experimental study on multi-pass dieless drawing process of superplas tic Zn-22%Al alloy microtubes2007
- Author(s)
  T.Furushima and K.Manabe
- Journal Title
  
  Jounal of Materials Processing Technology 187-188
  
  Pages: 236-240
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760072
[Journal Article] 内面溝付銅管のダイレス引抜き加工2006
- Author(s)
  古島剛, 真鍋健一, 新井淳
- Journal Title
  
  第57回塑性加工連合講演会講演論文集
  
  Pages: 439-440
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] 超塑性ダイレス引抜きによるマイクロチューブの創成実験2006
- Author(s)
  古島剛, 真鍋健一, 酒井孝
- Journal Title
  
  日本塑性加工学会誌(塑性と加工) 第47巻・548号
  
  Pages: 870-874
- NAID
  10017953651
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] EXPERIMENTAL AND NUMERICAL STUDY ON DEFORMATION BEHAVIOR IN DIELESS DRAWING PROCESS OF SUPERPLASTIC MICROTUBES2006
- Author(s)
  T.Furushima, K.Manabe
- Journal Title
  
  Proceedings of Int. Conf. On Advanced Materials ＆ Processing Technol. AMPT 2006 CD-ROM
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] EXPERIMENTAL STUDY ON MULTI-PASS DIELESS DRAWING PROCESS OF SUPERPLASTIC Zn-22% AlALLOY MICROTUBES2006
- Author(s)
  T.Furushima, K.Manabe
- Journal Title
  
  Proc. of 3^<rd> Int. Conf. on Advanced Forming and Die Manufacturing Technol. AFDM2006 CD-ROM
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] アルミニウム合金異形押出し管材のダイレス引抜き2006
- Author(s)
  古島剛, 真鍋健一
- Journal Title
  
  軽金属学会第111回秋期講演大会講演概要集
  
  Pages: 35-36
- NAID
  10022564068
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] EXPERIMENTAL AND NUMERICAL STUDY ON DEFORMATION BEHAVIOR IN DIELESS DRAWING PROCESS OF SUPERPLASTIC MICROTUBES2006
- Author(s)
  T. Furushima and K. Manabe
- Journal Title
  
  Proceedings of Int. Conf. On Advanced Materials & Processing Technol. AMPT 2006 (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Journal Article] 超塑性ダイレス引抜きによるマイクロチューブの創成実験2006
- Author(s)
  古島剛、真鍋健一、酒井孝
- Journal Title
  
  日本塑性加工学会誌(塑性と加工) 第47巻548号
  
  Pages: 870-874
- NAID
  10017953651
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360355
[Patent] 金属製中空マイクロニードルの製造方法、および金属製中空マイクロニードル2021
- Inventor(s)
  古島　剛
- Industrial Property Rights Holder
  古島　剛
- Industrial Property Rights Type
  特許
- Industrial Property Number
  2021-011413
- Filing Date
  2021
- Data Source
  KAKENHI-PROJECT-20K21074
[Presentation] セミダイレス引抜きと空引きの複合プロセスによる薄肉・平滑な表面を有する生体吸収性マグネシウム合金管の創製2022
- Author(s)
  117)岸本拓磨，古島剛
- Organizer
  日本塑性加工学会2022年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-19H02476
[Presentation] ダイレスフォーミングによる難加工性マグネシウム合金極細薄肉管の創製と医療用分解性ステント形状の創成2021
- Author(s)
  古島　剛
- Organizer
  日本塑性加工学会関西支部2021年度総会第57期総会・支部講演会
- Invited
- Data Source
  KAKENHI-PROJECT-19H02476
[Presentation] マグネシウム合金管のセミダイレス引抜きにおける外面の表面あれ進展挙動2021
- Author(s)
  岸本拓磨，P. Du，古島剛
- Organizer
  日本塑性加工学会第72回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-19H02476
[Presentation] Effects of forming conditions on microstructure and mechanical properties of Zn-22Al superplastic microtubes fabricated by direct extrusion2021
- Author(s)
  Yushi, Yi, 小峰久直，古島剛
- Organizer
  2021年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-20K21074
[Presentation] Development of high-temperature tensile testing system incorporating digital image correlation with laser speckles for micro-scaled metal foils2021
- Author(s)
  Qiu Zheng, Tsuyoshi Furushima
- Organizer
  The 13th Asian Workshop on Micro/Nano Forming Technology (AWMFT2021) and The 3rd Asian Pacific Symposium on Technology of Plasticity (APSTP2021)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02476
[Presentation] Deformation-induced surface roughening of an Al-Mg alloy2018
- Author(s)
  P. Knysh, K. Sasaki, T. Furushima, M. Knezevic, Y.P. Korkolis
- Organizer
  11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] 多結晶金属板の結晶組織解析および自由表面あれ挙動の可視化2018
- Author(s)
  佐々木完太，Yannis P. Korkolis, 古島剛
- Organizer
  平成30年度塑性加工春季講演会
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] Development of In-situ Observation Methods of Surface Roughening Behavior By Hand-size Stretching Test for Metal Foils2018
- Author(s)
  T. Furushima, Y. Hirose
- Organizer
  11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] ひずみ誘起自由表面あれ進展挙動の共焦点レーザ顕微鏡下その場観察装置の開発2018
- Author(s)
  古島　剛，廣瀬　雄太郎
- Organizer
  日本銅学会第58回講演大会
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] レーザスペックルパターンを応用したデジタル画像相関法による塑性ひずみ分布の完全非接触計測と可視化2018
- Author(s)
  古島剛，増和尚輝
- Organizer
  平成30年度塑性加工春季講演会
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] 材料不均質性を考慮した微細精密プレス成形シミュレーション－蟻よりも小さなプレス成形の世界－2017
- Author(s)
  古島　剛
- Organizer
  MF-TOKYO2017学会テクニカルセミナー
- Invited
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] Influence of different deformation routes on the mechanical properties and microstructures of micro-ECAP processed pure Mg specimen2017
- Author(s)
  Hejie Li, Ken-ichi Manabe, Andreas Ochsner, Kazuo Tada, Zhengyi Jiang, Tsuyoshi Furushima
- Organizer
  The 10th Asian Workshop on Micro/Nano Forming Technology (AWMFT2017)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17F16718
[Presentation] 二軸引張応力状態における極薄金属箔材の局所くびれ発生に及ぼす自由表面あれ進展挙動のその場観察2017
- Author(s)
  古島　剛，真鍋　健一
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] Investigation of deformation-induced surface roughening based on microstructure analysis in polycrystalline metal sheets2017
- Author(s)
  Kanta SASAKI, Yannis P. Korkolis, Koji Kakehi, Tsuyoshi FURUSHIMA
- Organizer
  The 10th Asian Workshop on Micro/Nano Forming Technology (AWMFT2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] 単軸引張応力状態における結晶組織分析に基づく多結晶金属薄板の自由表面あれ挙動に関する実験的研究2017
- Author(s)
  佐々木　完太，Yannis P. Korkolis，筧　幸次，古島　剛
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] Development of Compact Marchiniak Testing Apparatus for In-situ Microscopic Observation of Surface Roughening2017
- Author(s)
  T. Furushima, Y. Hirose, K. Tada, K. Manabe
- Organizer
  The 12th International Conference on Technology of Plasticity (ICTP2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] Development on the Technologies and Applications of the Equal Channel Angular Pressing2017
- Author(s)
  Hejie Li, Ken-ichi Manabe, Andreas Ochsner, Zhengyi Jiang, Tsuyoshi Furushima
- Organizer
  The 1st Asia Pacific Symposium on Technology of Plasticity (APSTP 2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17F16718
[Presentation] 小型張出し試験機を用いた金属箔材の自由表面あれと局所くびれ発生過程の顕微鏡その場観察2016
- Author(s)
  古島　剛, 廣瀬　雄太郎, 真鍋　健一
- Organizer
  平成28年度塑性加工春季講演会
- Place of Presentation
  京都
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] レーザスペックルパターンを用いたデジタル画像相関法による金属薄板の塑性ひずみ評価2016
- Author(s)
  古島　剛, 増和　尚輝, 真鍋　健一
- Organizer
  平成28年度塑性加工春季講演会
- Place of Presentation
  京都
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] NOVEL NON-CONTACT EVALUATION OF PLASTIC DEFORMATION USING DIGITAL IMAGE CORRELATION WITH LASER SPECKLE PATTERN2016
- Author(s)
  N. Mashiwa, T. Furushima and K. Manabe
- Organizer
  Advances in Materials and Processing Technologies, 2016 (AMPT 2016)
- Place of Presentation
  Kuala Lumpur, Malaysia
- Year and Date
  2016-11-08
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06800
[Presentation] Real-time Monitoring System for Dieless Bellows Forming using Machine Vision2013
- Author(s)
  S. Supriadi, T. Furushima, K. Manabe
- Organizer
  the 13th International Conference on QIR (Quality in Research)
- Place of Presentation
  Yogyakarta, Indonesia
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] 金属マイクロチューブのダイレスねじり引抜き法の開発2013
- Author(s)
  古島　剛，今川　祐介，真鍋　健一
- Organizer
  日本機械学会第21回機械材料・材料加工技術講演会（M&P2012)
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] ダイレス引抜きにより創製したマイクロチューブのSEM-EBSD観察2013
- Author(s)
  組沢　至，酒井　孝，古島　剛
- Organizer
  第64回塑性加工連合講演会
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] Workability of AZ31 Magnesium Alloy Tubes in Dieless Drawing Process2012
- Author(s)
  T. Furushima, K. Manabe
- Organizer
  14th International Conference on Metal Forming (Metal Forming2012)
- Place of Presentation
  Poland
- Data Source
  KAKENHI-PROJECT-24560888
[Presentation] Workability of AZ31 Magnesium Alloy Tubes in Dieless Drawing Process2012
- Author(s)
  T. Furushima
- Organizer
  14th International Conference on Metal Forming (Metal Forming2012)
- Place of Presentation
  Krakow, Poland
- Year and Date
  2012-09-19
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube2012
- Author(s)
  Z.C.Zhang, K. Manabe, T. Furushima and K. Tada
- Organizer
  The 3nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP2012)
- Place of Presentation
  Beihai, China
- Data Source
  KAKENHI-PROJECT-23656468
[Presentation] Development of Cyclic Rotating Bending Apparatus for Microstructure Control of Metal Tubes2012
- Author(s)
  Z. Zhang, K. Manabe, K.Takahashi, T. Furushima and K. Tada
- Organizer
  第63回塑性加工連合講演会
- Place of Presentation
  北九州国際会議場
- Data Source
  KAKENHI-PROJECT-23656468
[Presentation] Free Surface Roughness Prediction in Bending Under Tension2011
- Author(s)
  S.Alexandrov, K.Manabe, T.Furushima
- Organizer
  The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET2011)
- Place of Presentation
  Seoul Korea
- Year and Date
  2011-08-23
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] FE Simulation Considering Mesoscopic Material Inhomogenetiy For Prediction of Free Surface Roughening2011
- Author(s)
  T. Furushima, T. Masuda, K. Manabe
- Organizer
  6th International Conoference on Micromanufacturing
- Place of Presentation
  日本,東京
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Prediction of Free Surface Roughening by 2D and 3D FE Model Considering Material Inhomogeneity2011
- Author(s)
  T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
- Organizer
  The JSME/ASME 2011 International Conference on Materials and Processing(ICM & P2011)
- Place of Presentation
  Oregon, USA
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening2011
- Author(s)
  T.Furushima, T.Masuda, K.Manabe, S.Alexandrov
- Organizer
  The 2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP2011)
- Place of Presentation
  Guilin, China
- Year and Date
  2011-12-18
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Free Surface Roughness Prediction in Bending Under Tension2011
- Author(s)
  S. Alexandrov, K. Manabe, T. Furushima
- Organizer
  The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2011)
- Place of Presentation
  Seoul Korea
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Material Inhomogeneity Modeling for Micro Metal Forming2011
- Author(s)
  T.Furushima
- Organizer
  The 2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP2011)
- Place of Presentation
  Guilin, China(基調講演)
- Year and Date
  2011-12-17
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] メゾ領域の不均質性を考慮した材料構成式による多軸応力下の自由表面あれ予測2011
- Author(s)
  古島剛,増田哲朗,真鍋健一
- Organizer
  日本機械学会第18回機械材料・材料加工技術講演会
- Place of Presentation
  日本,東京
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Analysis of Micro Cross Wedge Rolling of Metals2011
- Author(s)
  H. Lu, D. Wei, Z. Jiang, K. Manabe, T. Furushima
- Organizer
  The 5th International Conference on Tube hydroforming(TUBEHYDRO 2011)
- Place of Presentation
  Hokkaido, Japan
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Material Inhomogeneity Modeling for Micro Metal Forming2011
- Author(s)
  T. Furushima
- Organizer
  The 2nd International Conference on Advances in Materials and Manufacturing Processes(ICAMMP 2011)
- Place of Presentation
  Guilin, China
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Prediction of Free Surface Roughening by 2D and 3D FE Model Considering Material Inhomogeneity2011
- Author(s)
  T.Furushima, T.Masuda, K.Manabe, S.Alexandrov
- Organizer
  The JSME/ASME 2011 International Conference on Materials and Processing (ICM&P2011)
- Place of Presentation
  Oregon, USA
- Year and Date
  2011-06-16
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Analysis of Micro Cross Wedge Rolling of Metals2011
- Author(s)
  H.Lu, D.Wei, Z.Jiang, K.Manabe, T.Furushima
- Organizer
  The 5^<th> International Conference on Tube hydroforming (TUBEHYDRO2011)
- Place of Presentation
  Hokkaido, Japan
- Year and Date
  2011-07-26
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening2011
- Author(s)
  T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
- Organizer
  The 2nd International Conference on Advances in Materials and Manufacturing Processes(ICAMMP 2011)
- Place of Presentation
  Guilin, China
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] FE Simulation Considering Mesoscopic Material Inhomogenetiy For Prediction of Free Surface Roughening2011
- Author(s)
  T.Furushima, T.Masuda, K.Manabe
- Organizer
  6th International Conoference on Micromanufactu ring
- Place of Presentation
  日本,東京
- Year and Date
  2011-03-08
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] 不均質性を考慮した有限要素解析による多軸応力下の自由表面あれ挙動と連続観察2011
- Author(s)
  古島剛,増田哲朗,真鍋健一, S. Alexsandrov
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  日本,東京
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] In-situ Observation and Anisotropy of Free Surface Roughening for Polycrystalline Metals2010
- Author(s)
  T.Furushima, T.Masuda, K.Manabe
- Organizer
  9th Asia-Pacific Conference on Materials Processing (APCMP2010)
- Place of Presentation
  オーストラリア,シドニー
- Year and Date
  2010-06-09
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] 材料の不均質性を考慮した多軸応力下における自由表面あれ挙動予測モデリング2010
- Author(s)
  古島剛,増田哲朗,真鍋健一
- Organizer
  第61回塑性加工連合講演会
- Place of Presentation
  日本,山形
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] In-situ Observation and Anisotropy of Free Surface Roughening for Polycrystalline Metals2010
- Author(s)
  T. Furushima, T. Masuda, K. Manabe
- Organizer
  9th Asia-Pacific Conference on Materials Processing(APCMP 2010)
- Place of Presentation
  オーストラリア,シドニー
- Data Source
  KAKENHI-PROJECT-22760563
[Presentation] 超塑性材料の引張変形における自由表面あれ挙動に関する研究2008
- Author(s)
  森井暢、古島剛、真鍋健一
- Organizer
  日本機械学会関東学生会47回卒業研究発表講演会
- Place of Presentation
  東京海洋大学越中島キャンパス
- Year and Date
  2008-03-14
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] Effect of Statistical Distribution of Grain Properties on Development of Free Surface Roughness2008
- Author(s)
  T. Furushima, K. Manabe, S. Alexsandrov
- Organizer
  The XXXVI International Summer School, Advanced Problems in Mechanics Conference
- Place of Presentation
  St. Petersburg, Russia
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] 硬さ統計分布による材料の不均質性評価を用いた自由表面あれ予測モデリング2008
- Author(s)
  真鍋健一,古島剛,中田浩司,S. Alexsandrov
- Organizer
  第58回塑性加工連合講演会
- Place of Presentation
  東広島
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] Roughness Evolution on Free Surfaces of Micro Material with Strain Rate Sensitivity in Dieless Forming2008
- Author(s)
  T. Furushima, S. Aleksandrov, K. Manabe
- Organizer
  Int. Conf. on New Forming Technology (2nd ICNFT)
- Place of Presentation
  Bremen, Germany
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] 金属マイクロチューブのレーザーダイレス引抜きに関する研究2008
- Author(s)
  古島剛、野田雄太、真鍋健一
- Organizer
  第59回塑性加工連合講演会講演論文集
- Place of Presentation
  広島大学(東広島市)
- Year and Date
  2008-11-09
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] Roughness Evolution on Free Surfaces of Micro Material with Strain Rate Sensitivity in Dieless Forming2008
- Author(s)
  T.Furushima, S.Aleksandrov, K.Manabe
- Organizer
  Int.Conf.on New Forming Technology(2nd IC NFT)
- Place of Presentation
  ドイツ・ブレーメン
- Year and Date
  2008-09-20
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] FE Mesoscopic Analysis of Roughness Evolution on Free Surface of Thin Sheet Metals with Strain Rate Sensitivity2008
- Author(s)
  T.Furushima, K.Manabe, S.Aleksandrov
- Organizer
  Asian Workshop on Nano/Micro Forming Techn ology
- Place of Presentation
  日本・北海道
- Year and Date
  2008-10-26
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] 異形管の超塑性ダイレス引抜きに関する検討2008
- Author(s)
  古島剛、白崎篤、真鍋健一
- Organizer
  平成20年度塑性加工春季講演会論文集
- Place of Presentation
  日本大学生産工学部,(習志野市)
- Year and Date
  2008-05-26
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] マイクロチューブのレーザーダイレス引抜きに関する研究2008
- Author(s)
  野田雄太、古島剛、真鍋健一
- Organizer
  日本機械学会関東学生会47回卒業研究発表講演会
- Place of Presentation
  東京海洋大学越中島キャンパス
- Year and Date
  2008-03-14
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] FE Mesoscopic Analysis of Roughness Evolution on Free Surface of Thin Sheet Metals with Strain Rate Sensitivity2008
- Author(s)
  T. Furushima, K. Manabe, S. Aleksandrov
- Organizer
  Asian Workshop on Nano/Micro Forming Technology
- Place of Presentation
  Hokkaido, Japan
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] 金属マイクロチューブのレーザーダイレス引抜きに関する研究2008
- Author(s)
  古島剛, 野田雄太, 真鍋健一
- Organizer
  第59回塑性加工連合講演会講演論文集
- Place of Presentation
  広島大学 (東広島市)
- Year and Date
  2008-11-09
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] Effect of Microscopical Inhomogeneity of Material on Macroscopic Deformation Behavior2008
- Author(s)
  T. Furushima, K. Manabe, S. Alexsandrov
- Organizer
  第58回塑性加工連合講演会
- Place of Presentation
  東広島
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] マイクロチューブのレーザーダイレス引抜きに関する研究2008
- Author(s)
  野田雄太、古島剛、真鍋健一
- Organizer
  日本機械学会関東学生会47回卒業研究発表講演会
- Place of Presentation
  東京海洋大学越中島キャンパス
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] 異形管の超塑性ダイレス引抜きに関する検討2008
- Author(s)
  古島剛, 白崎篤, 真鍋健一
- Organizer
  平成20年度塑性加工春季講演会論文集
- Place of Presentation
  日本大学生産工学部 (習志野市)
- Year and Date
  2008-05-26
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] 異形複合管の超塑性ダイレス引抜きに関する研究2008
- Author(s)
  白崎篤、古島剛、真鍋健一
- Organizer
  日本機械学会関東学生会47回卒業研究発表講演会
- Place of Presentation
  東京海洋大学越中島キャンパス
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] 超塑性材料の引張変形における自由表面あれ挙動に関する研究2008
- Author(s)
  森井暢、古島剛、真鍋健一
- Organizer
  日本機械学会関東学生会47回卒業研究発表講演会
- Place of Presentation
  東京海洋大学越中島キャンパス
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] 超塑性材料の引張変形における自由表面あれ挙動に関する研究2008
- Author(s)
  古島剛,森井暢,真鍋健一
- Organizer
  平成20年度塑性加工春季講演会
- Place of Presentation
  習志野
- Data Source
  KAKENHI-PROJECT-19760072
[Presentation] マイクロチューブのダイレス引抜きにおける変形及び伝熱挙動に及ぼす寸法効果2007
- Author(s)
  古島剛、真鍋健一
- Organizer
  平成19年度塑性加工春季講演会論文集
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] 内面溝付銅管のダイレス引抜き加工2006
- Author(s)
  古島剛, 真鍋健一, 新井淳
- Organizer
  第57回塑性加工連合講演会講演論文集
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] アルミニウム合金異形押出し管材のダイレス引抜き2006
- Author(s)
  古島剛、真鍋健一
- Organizer
  軽金属学会第111回秋期講演大会講演概要集
- Place of Presentation
  35-36
- Data Source
  KAKENHI-PROJECT-18360355
[Presentation] Deformation Profile in Rotary Laser Dieless Drawing Process for Metal Microtubes
- Author(s)
  T. Furushima, Y. Imagawa, S. Furusawa, K. Manabe
- Organizer
  11th International Conference on Technology of Plasticity, ICTP 2014
- Place of Presentation
  Nagoya, Japan
- Year and Date
  2014-10-19 – 2014-10-24
- Data Source
  KAKENHI-PROJECT-24560888
[Presentation] Development of superplastic dieless drawing apparatus for 3Y-TZP zirconia ceramic tube
- Author(s)
  T. Furushima, Y. Hirose, K. Tada, K. Manabe
- Organizer
  12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015
- Place of Presentation
  Tokyo, Japan
- Year and Date
  2015-09-07 – 2015-09-11
- Data Source
  KAKENHI-PROJECT-24560888
[Presentation] レーザねじりダイレス引抜きによって創製した金属マイクロチューブの機械的特性評価
- Author(s)
  古島　剛、今川　祐介、古澤　周作、真鍋　健一、酒井　孝
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  つくば市、茨城
- Year and Date
  2014-06-06 – 2014-06-08
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] Development of Rotary Laser Dieless Drawing Apparatus for Metal Microtubes
- Author(s)
  Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa and Ken-ichi Manabe
- Organizer
  12th Asia-Pacific Conference on Engineering Plasticity and Its Applications(AEPA2014)
- Place of Presentation
  Kaohsiung、Taiwan
- Year and Date
  2014-09-01 – 2014-09-05
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] A novel processing for metal microtubes -rotary laser dieless drawing process-
- Author(s)
  Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa, Ken-ichi Manabe
- Organizer
  11th International Conference on Technology of Plasticity(ICTP2014)
- Place of Presentation
  Nagoya Congress Center,Japan
- Year and Date
  2014-10-19 – 2014-10-24
- Data Source
  KAKENHI-PROJECT-24360310
[Presentation] レーザーマルチパスダイレス引抜きにおけるステンレス微細管の表面平滑化の効果
- Author(s)
  古島剛、古澤周作、真鍋健一
- Organizer
  日本機械学会関東支部第21期総会講演会
- Place of Presentation
  横浜国立大学、神奈川
- Year and Date
  2015-03-20 – 2015-03-21
- Data Source
  KAKENHI-PROJECT-24360310

1. MANABE Kenichi (10145667)

# of Collaborated Projects: 5 results

# of Collaborated Products: 56 results
2. YANG Ming (90240142)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
3. YOSHIHARA Shoichiro (00311001)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. TAKAHASHI Satoshi (80260785)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. SHIMIZU Tetsuhide (70614543)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. Alexandrov Sergei

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
7. Korkolis Yannis

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
8. LI HEJIE

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results

Furushima Tsuyoshi 古島 剛

FURUSHIMA Tsuyoshi 古島 剛

Research Projects

Research Products

Co-Researchers

Development of new microstructure control method based on visualization of plastic deformation under non-uniform temperature strain rate fieldsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Fabrication of Conductive Metallic Micro needles by Superplastic Deformation and Its Fracture for Medical and Biochemical ApplicationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Microstructure control of magnesium alloy by dieless drawing with non-uniform temperature and strain ratePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Novel Micro Fabrication Technique of Mg Alloys and Its Application to Micro FormingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

In-situ observation with laser of surface roughening and fracture behaviors for thin-metal foils under bi-axial tensile statePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of warm micro ultra deep drawing process based on blank material flow control with press motion and ultra high fluid pressure

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of high grade medical microtubes with microstructure control in superplastic dieless drawing process

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of ceramic micro tube for solid-oxide fuel cell using superplastic dieless drawing processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Novel Cyclic Rotating Bending Process for Control of Microstructure and Grain Refinement of Metal Tubes

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation of Micro Plastic Characteristic of Metals by Micro Indentation for Precise Analysis on Metal FormingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Mesoscopic Deformation Behavior and In-situ Observation of Free Surface Roughening in Micro FormingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of creation method of extra fine strange appearance set microtube using minute crystal superplasticity

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Effect of microstructure on outer surface roughening of magnesium alloy tubes in die-less mandrel drawing2022

Author(s)

Journal Title

Furushima Tsuyoshi 古島剛

FURUSHIMA Tsuyoshi 古島剛