• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

YAMAUCHI Katsumi  山口 勝美

ORCIDConnect your ORCID iD *help
… Alternative Names

山口 勝美  ヤマグチ カツミ

YAMAGUCHI Katsumi  山口 勝美

Less
Researcher Number 40023056
External Links
Affiliation (based on the past Project Information) *help 1999: Nagoya Univ., Grad. School of Eng., Professor, 工学研究所, 教授
1997 – 1999: Dept.of Mechanical Engineering, Nagoya University, Professor, 工学研究科, 教授
1997: 名古屋大学, 大学院・工学研究科, 教授
1993 – 1996: 名古屋大学, 工学部, 教授
1989: 名古屋大学, 工学部, 教授
1986: Nagoya University, School of Engineering, 工学部, 教授
Review Section/Research Field
Principal Investigator
機械工作・生産工学 / 機械工作
Except Principal Investigator
機械工作・生産工学
Keywords
Principal Investigator
マイクロ加工 / SiC whisker / Directional alignment / Grinding wheel / Grinding ratio / Lapping / Tool wear / Fatigue wear / 感光性樹脂 / 電鋳加工 … More / リングラフィ- / 紫外線 / エッチング / SiCウィスカ / 方位制御 / 研削砥石 / レジノイド砥石 / 表面仕上げ / 正面研削 / 仕上面粗さ / 精密研削 / マイクロ部品 / 紫外線感光性樹脂 / 集束レーザビーム / 高アスペクト比 / 3次元形状 / ビーム描画 / 光の吸収 / Micro Part / UV Photopolymer / Focused Laser Beam / High Aspect Ratio / Three Dimensional Part / Beam Writing / Absorption of Light / Sintered diamond / 砥石 / ウィスカ- / 研磨 / SiC / 表面あらさ / 研削比 / 目づまり / 研磨液 / Sistered diamond / メタルジェット / 3次元造形 / ラピッドプロトタイピング / 傾斜機能材料 / 3次元配線 / 三次元造形 / 三次元配線 / Metal jet / Micro forming / 3D forming / Rapid prototyping / Functionally gradient material / 3D wiring / 焼結材 / 快削性 / 非金属添加剤 / 切削 / 工具寿命 / Sintered Material / Machinability / Non-metal Additive / Cutting … More
Except Principal Investigator
紫外線感光性樹脂 / マイクロ部品 / 高アスペクト比 / 3次元形状 / 集束ビーム描画法 / 光の吸収 / 製品精度 / 樹脂硬化形状 / 炭化ホウ素 / YAGレーザー / レーザー焼結 / X線回折 / 成膜 / 膜硬度 / 造形 / ビーム描画 / X線回析 / Boron carbide / YAG Laser / Laser sintering / X-ray diffraction / Producing film / Hardness of the film / Micromachining / Beam scanning / 光造形法 / ウィスカー / 方位制御 / 精度 / 樹脂の収縮 / 引張強度 / 照射エネルギー / 樹脂の硬化 / Laser Photolithography / Micro Part / Whisker / Unidirection / Accuracy / Shrinkage / Tensile Strength / Photopolymer Less
  • Research Projects

    (9 results)
  • Co-Researchers

    (5 People)
  •  Fabrication of Unidirectional Whisker reinforced Micro Part

    • Principal Investigator
      NAKAMOTO Takeshi
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  Forming of 3D Structure by Metal Jet.Principal Investigator

    • Principal Investigator
      YAMAGUCHI Katsumi
    • Project Period (FY)
      1997 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  Reactive YAG Laser Sintering of Gradient Functional Film Made of Hard Boron Carbide

    • Principal Investigator
      NAKAMOTO Takeshi
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  アキシコンによる高アスペクト比のマイクロフォトファブリケーション

    • Principal Investigator
      中本 剛
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  Development of Directionally Aligned SiC Whisker Grinding WheelPrincipal Investigator

    • Principal Investigator
      YAMAGUCHI Katusmi
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  Manufacturing of Microstructures Produced by UV Sensitive Photopolymer Using Laser Beam WritingPrincipal Investigator

    • Principal Investigator
      YAMAUCHI Katsumi
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  方位制御SiCウィスカー砥石の開発Principal Investigator

    • Principal Investigator
      山口 勝美
    • Project Period (FY)
      1993
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Nagoya University
  •  マイクロストラクチュア-の製造とその耐久性評価Principal Investigator

    • Principal Investigator
      山口 勝美
    • Project Period (FY)
      1989
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Nagoya University
  •  The Development of Free Machining Sintered Metal Including Non-metal AdditivesPrincipal Investigator

    • Principal Investigator
      YAMAGUCHI Katsumi
    • Project Period (FY)
      1985 – 1986
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Nagoya University
  • 1.  NAKAMOTO Takeshi (30198262)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 0 results
  • 2.  SAKAI Katsuhiko (80262856)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 3.  MORI Toshihiko (90023340)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  HORAGUCHI Iwao (20110182)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  MATSUMURO Akihito (80173889)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi