Kitamura Mitsuru 北村充

… Alternative Names

KITAMURA Mitsuru 北村充

Less

Researcher Number	40195293
Other IDs
External Links
Affiliation (Current)	2025: 広島大学, 先進理工系科学研究科(工), 名誉教授
Affiliation (based on the past Project Information) *help	2023 – 2024: 広島大学, 先進理工系科学研究科(工), 特任教授 2021 – 2022: 広島大学, 先進理工系科学研究科(工), 教授 2017 – 2018: 広島大学, 工学研究科, 教授 2016: 広島大学, 工学研究院, 教授 2014: 広島大学, 大学院工学研究院, 教授 … More 2013 – 2014: 広島大学, 工学(系)研究科(研究院), 教授 2010 – 2012: 広島大学, 大学院・工学研究院, 教授 2007 – 2009: 広島大学, 大学院・工学研究科, 教授 2005 – 2006: 広島大学, 大学院工学研究科, 教授 2001 – 2005: 広島大学, 大学院・工学研究科, 教授 2000: Hiroshima University, Faculty of Engineering ; Professor, 工学部, 教授 1993 – 2000: 広島大学, 工学部, 助教授 Less
Review Section/Research Field	Principal Investigator 船舶工学 / Naval and maritime engineering / Basic Section 24020:Marine engineering-related Except Principal Investigator 船舶工学 / Naval and maritime engineering / 海洋工学
Keywords	Principal Investigator 有限要素法 / 船体構造解析 / 船体構造 / finite element method / 船舶構造 / 最適化 / 接続部材反力推定 / 領域有限要素 / 構造最適設計 / 強化学習最適化 … More / 接続部材反推定 / 領域有限要素法 / トポロジー最適 / 船内騒音 / 船体振動 / 面内振動 / 振動・騒音計測 / 三角関数 / 船体 / 面内振動，面外振動 / 騒音伝播 / 騒音 / 振動 / 船舶 / 吸音材 / 中空ラティス構造 / 面内振動・面外振動 / 高周波振動 / laser welding / heat affected zone (NAZ) / elevated temperature / elastic-plastic / three-dimensional / hot crack / liquation crack / 陽解法 / 応力解析 / 潜熱 / 熱伝導解析 / 溶接 / 溶融凝固 / 非線形解析 / 高温割れ / 相変化 / 3次元解析モデル / 溶接熱影響部 / 高温歪み計測 / 電子ビーム溶接 / 3次元熱弾塑性歪み解析手法 / 3次元熱伝導解析手法 / 相当塑性歪み / キーホール型溶接法 / レーザ溶接 / 溶接熱影響部(HAZ) / 液化割れ / 3次元高温塑性歪み解析 / 3次元熱伝導解析 / bulk carrier / stress analysis / SPR method / ship structure / zooming analysis / 板曲げ要素 / 平面応力要素 / 解析精度 / 有限要素解析 / バルクキャリア / 応力 / SPR法 / ズーミング解析 / Ship Structure / Elasto-plastic Problems / Non-linear Elastic Problems / A Posteriori Error / Finite Element Method / 弾塑性問題 / 非線形弾性問題 / 事後誤差評価 / 質問形式 / ビデオ講座 / WebCT / 構造解析学 / 造船設計技術者育成 / e-Learning … More Except Principal Investigator 理想化構造要素法 / 最終強度 / 座屈強度 / 有限要素法 / Finite Element Method / 船体構造 / 船舶設計システム / Idealized Structural Unit Method / Ship Structure / 最適化 / 船舶生産システム / Ultimate Strength / Buckling Strength / 逐次崩壊挙動 / 溶接残留応力 / 縦曲げ最終強度 / 座屈・塑性崩壊挙動 / 設計プロセス / 不確定性 / プロセス / AI / ビッグデータ / 基本計画 / 海上物流 / Initial Welding Imperfection / Progressive Collapse Behavior / Dynamic Explicit Method / 水圧荷重 / 並列処理 / 溶接初期不整 / 動的陽解法 / Structural reliability / Ultimate strength / Buckling strength / Structural safety / Wave / Collapse behavior / Very Large Floating Structure / 理想化構想要素法 / 波浪荷重 / 構造信頼性 / 構造安全性 / 波 / 崩壊挙動 / 超大型浮体構造物 / Two-surface model / Cyclic hardening / Stiffened Plate / Rectangular plate / Cyclic Loads / 二曲面歪硬化モデル / FEM解析 / ニ曲面硬化モデル / 繰り返し座屈 / 2曲面モデル / 繰り返し硬化 / 防撓板 / 矩形板 / 繰り返し荷重 / Free-running model test / Maneuvering model identification / Mathematical model of maneuvering motion in port / Remote pilot system / Integrated supporting system for harbor maneuvering / GPS / ヒューマンインターフェイス / 音声認識 / 操船シミュレーション / モデル同定 / 低速時の運動モデル / DGPS / 狭水域 / 運動性能 / 港内操船 / 自由船走試験 / 船位誘導 / 船位認識 / 統合操船システム / 自由航走模型試験 / 操縦モデル固定 / 湾内操縦運動数学モデル / リモートパイロットシステム / 湾内総合操船システム / Heat Transfer / Natural Convection / Melting / Solidification / Phase Change / Thermal Styess / Asphalt Tanker / 熱伝導 / 自然対流 / 凝固・融解 / 相変化 / 熱応力 / アスファルトタンカー / Stiffener Tripping / Continuous Stiffened Plate / Smith's Methos / Idealized Structural Unit Method (ISUM) / Progressive Collapse Analysis / Ultimate Longitudinal Strength / 簡易計算法 / 座屈・塑性崩壊強度 / 初期たわみ / 船体桁 / 座屈・塑性崩壊 / 防撓材のトリピング / 連続防撓パネル / 理想化構造要素法(ISUM) / Smithの方法 / 逐次崩壊解析 / elastoplastic large deflection analysis / elastic / stiffened panel structure / combined loading / design allowing panel buckling / simple dynamical model / ultimate strength / post-buckling behavior / buckling strength / 複合荷重 / 船底外板 / 船体上甲板 / 弾性大たわみ解析 / 弾塑性大たわみ挙動 / 座屈挙動 / 防撓パネル / 座屈許容設計法 / 防撓パネル構造 / 組み合わせ荷重 / 弾塑性大たわみ解析 / 弾性 / 簡易力学モデル / 後座屈挙動 / Eigen Mode / Eigen Frequency / Vibration / Modules of Equipments / Engine Room Structure / 居住区構造 / 小型船 / 振動モード / 固有振動数 / 振動 / モジュール化 / 機関室構造 / Crack / Corrosion / Buckling / Database / Multimedia / Damage / 疲労き裂 / 腐食衰耗 / 教育システム / 船体損傷 / き裂 / 腐食 / 座屈 / データベース / マルチメディア / 損傷 / motions of cabin / twin hulls / wave induced responses / Hydrofoil Catamaran / high-speed catamaran / 船体振動 / 主船体-キャビン分離独立型船 / ばねとゴムの複合構造支柱 / 水中翼付高速双胴艇 / 水中翼 / キャビンの運動 / 分割構造艇 / 波浪応答 / 水中翼カタマラン / 高速双胴艇 / Matrix Transfer Method / Discrete Design Variable / Plastic Design / Multiplier Method / Optimized Design / SUMT法 / 二重殻船体構造 / 離散変数 / 有限要素解析 / マトリックス伝達法 / 乗数法 / 塑性解析 / 最適設計 / Crack extension / Residual stress / Idealized structural unit method / Tubular member / Residual strength / Crack damage / Dent damage / Offshore structure / 亀裂 / 三次元骨組構造 / 凹損 / 亀裂進展 / 残留応力 / 円筒部材 / 余剰耐力 / 亀裂損傷 / デント損傷 / 海洋構造物 / 船舶初期設計 / 製品モデル Less

領域有限要素法と接続部材反力推定を用いた船舶全体構造の最適化に関する研究Principal Investigator
- Principal Investigator
  
  北村充
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 24020:Marine engineering-related
- Research Institution
  Hiroshima University
A study on the support system to examine the ship design and construction strategy using maritime logistics big data
- Principal Investigator
  
  Hamada Kunihiro
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
Study on relationship between ship structure and noise transmission route and research on creation of structure to reduce noise levelPrincipal Investigator
- Principal Investigator
  
  Kitamura Mitsuru
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
A study on the design system for ship initial design to support the examination of design process
- Principal Investigator
  
  HAMADA Kunihiro
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
Development of the design simulator for ship initial design stage in consideration of the uncertainties of the design
- Principal Investigator
  
  HAMADA Kunihiro
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
造船の設計・生産プロセスの計画と評価のための最適化シミュレーションシステムの開発
- Principal Investigator
  
  濱田邦裕
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
造船技術者育成のためのe-Learningシステム構築とその有効性に関する研究Principal Investigator
- Principal Investigator
  
  北村充
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
Progressive Collapse Behavior of Ship Hull and Efficient Method of Its Analysis
- Principal Investigator
  
  FUJIKUBO Masahiko
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Naval and maritime engineering
- Research Institution
  Hiroshima University
Study on analysis model for simulating hot cracking phenomenon at heat affected zone of weldmentPrincipal Investigator
- Principal Investigator
  
  KITAMURA Mitsuru
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  船舶工学
- Research Institution
  Hiroshima University
Structural Collapse Behavior of Very Large Floating Structures in Waves
- Principal Investigator
  
  FUJIKUBO Masahiko
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  海洋工学
- Research Institution
  Hiroshima University
A Study on Accurate Zooming Analysis for Ship StructurePrincipal Investigator
- Principal Investigator
  
  KITAMURA Mitsuru
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  船舶工学
- Research Institution
  Hiroshima University
Ultimate Hull Girder Strength under Longitudinal Bending
- Principal Investigator
  
  YAO Tetsuya
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (A).
- Research Field
  
  船舶工学
- Research Institution
  Osaka University
  Hiroshima University
A Study on Direct Carrying Type of Asphalt Tanker
- Principal Investigator
  
  NOBUKAWA Hisashi
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  船舶工学
- Research Institution
  Hiroshima University
Study on Integrated Support System for Harbor Maneuvering
- Principal Investigator
  
  KOSE Kuniji
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  船舶工学
- Research Institution
  Hiroshima University
Development of simplified model for buckling collapse analysis of plates and stiffened plates under cyclic loa
- Principal Investigator
  
  FUJIKUBO Masahiko
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  船舶工学
- Research Institution
  HIROSHIMA UNIVERSITY
Development of the database for damages of ship structures by using multimedia
- Principal Investigator
  
  SUMI Yoichi
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  船舶工学
- Research Institution
  Yokohama National University
Optimization of Engine Room Structure with Modules of Equipments
- Principal Investigator
  
  NOBUKAWA Hisashi
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  船舶工学
- Research Institution
  HIROSHIMA UNIVERSITY
On Development of Design Method Allowing Buckling
- Principal Investigator
  
  YAO Tetsuya
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  船舶工学
- Research Institution
  HIROSHIMA UNIVERSITY
A posteriori error estimation of elasto-plastic analysis for ship structurePrincipal Investigator
- Principal Investigator
  
  KITAMURA Mitsuru
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  船舶工学
- Research Institution
  HIROSHIMA UNIVERSITY
A Study on the Wave Induced Responses for High Speed Hydrofoil Catamaran
- Principal Investigator
  
  NOBUKAWA Hisashi
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  船舶工学
- Research Institution
  HIROSHIMA UNIVERSITY
Evaluation of Residual Strength of Offshore Structures
- Principal Investigator
  
  YAO Tetsuya
- Project Period (FY)
  1993 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  海洋工学
- Research Institution
  HIROSHIMA UNIVERSITY
Study on Optimized Design of Ship Structure
- Principal Investigator
  
  NOBUKAWA Hisashi
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  船舶工学
- Research Institution
  HIROSHIMA UNIVERSITY

[Journal Article] 2 Step design for sandwich panel structure satisfying with restriction of static stress and eigen frequency2024
- Author(s)
  佐々木伸，北村充，竹澤晃弘
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 90 Issue: 931 Pages: 23-00252-23-00252
- DOI
  10.1299/transjsme.23-00252
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23K21008
[Journal Article] Material Cost Minimization Method of the Ship Structure Considering Material Selection2023
- Author(s)
  Geryy Liston Putra and Mitsuru Kitamura
- Journal Title
  
  Journal of Marine Science and Engineering
  
  Volume: 11(3) Issue: 3 Pages: 1-16
- DOI
  10.3390/jmse11030640
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K21008
[Journal Article] Design optimization of functionally graded lattice infill total hip arthroplasty stem for stress shielding reduction2022
- Author(s)
  Nomura Jumpei、Takezawa Akihiro、Zhang Heng、Kitamura Mitsuru
- Journal Title
  
  Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
  
  Volume: 236 Issue: 4 Pages: 515-525
- DOI
  10.1177/09544119221075140
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18KK0412, KAKENHI-PROJECT-23K21008
[Journal Article] Study on Optimal Design of a Folding-Type Hatch Cover Considering Material Selection2021
- Author(s)
  Gerry Liston Putra, Mitsuru Kitamura, Akihiro Takezawa
- Journal Title
  
  JOURNAL OF SHIP PRODUCTION AND DESIGN
  
  Volume: 37-04 Issue: 04 Pages: 237-247
- DOI
  10.5957/jspd.12190063
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K21008
[Journal Article] An objective function for the topology optimization of sound-absorbing materials2019
- Author(s)
  A. Takezawa, T. Yamamoto, X. Zhang, K. Yamakawa, S. Nakano. M. Kitamura
- Journal Title
  
  JOURNAL OF SOUND AND VIBRATION
  
  Volume: 443 Pages: 804-819
- DOI
  10.1016/j.jsv.2018.11.051
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04603
[Journal Article] Structural optimization of stiffener layout for stiffened plate using hybrid GA2019
- Author(s)
  G. Liston Putra, M. Kitamura, A. Takezawa
- Journal Title
  
  International Journal of Naval Architecture and Ocean Engineering
  
  Volume: 印刷中 Issue: 2 Pages: 809-818
- DOI
  10.1016/j.ijnaoe.2019.03.005
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16H04603
[Journal Article] Design methodology using topology optimization for anti-vibration reinforcement of generators in a ship's2015
- Author(s)
  Masafumi Daifuku, Takafumi Nishizu, Akihiro Takezawa, Mitsuru Kitamura,Haruki Terashita, Yasuaki Ohtsuki
- Journal Title
  
  Journal of Engineering for the Maritime Environment
  
  Volume: 印刷中 Issue: 1 Pages: 216-226
- DOI
  10.1177/1475090214543081
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24360356, KAKENHI-PROJECT-25820422
[Journal Article] 制約条件に対する影響度を考慮した設計変数の分類と構造最適設計2014
- Author(s)
  平川真一，北村充，野波涼太，牧美津栄
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: 19 Pages: 149-157
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] ワイルドカードGAを利用した船舶設計プロセスの最適化に関する研究2014
- Author(s)
  濱田邦裕，藤井亮，弘中睦己，平田法隆，北村充
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: 20 Pages: 231-242
- NAID
  130004943545
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] Damage detection method by topology optimization based on eigenvalue analysis2014
- Author(s)
  Takafumi Nishizu, Akihiro Takezawa, Mitsuru Kitamura
- Journal Title
  
  Proceedings of ISOPE 2014
  
  Volume: CD-ROM
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] Damage identification in non-destructive testing based on topology optimization and eigenfrequency analysis2013
- Author(s)
  西津卓史，竹澤晃弘，北村充
- Journal Title
  
  Journal of the Japan Society of Naval Architects and Ocean Engineers
  
  Volume: 18 Issue: 0 Pages: 73-80
- DOI
  10.2534/jjasnaoe.18.73
- NAID
  130003393950
- ISSN
  1880-3717, 1881-1760
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360356, KAKENHI-PROJECT-25820422
[Journal Article] A Study on the Optimization of Ship Design Process using WildCard GA2013
- Author(s)
  Hamada, K., Fujii, R., Hironaka, Y., Kitamura, M.
- Journal Title
  
  Proceedings of the International Conference on Computer Applications in Shipbuilding 2013
  
  Volume: 1 Pages: 73-82
- NAID
  130004943545
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] Anti-vibration reinforcement design methodology of ship engine room using topology optimization2013
- Author(s)
  Masafumi Daifuku, Kouhei Kawasaki, Akihiro Takezawa, Mitsuru Kitamura, Haruki Terashita, Yasuaki Ohtsuki,,
- Journal Title
  
  Proceedings of the International Conference on Computer Applications in Shipbuilding 2013
  
  Volume: 3 Pages: 175-179
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] A Study on Optimization of Ship Structure and Reducing Computational Effort2012
- Author(s)
  Nonami R., Kitamura M., Takezawa A., et.al.
- Journal Title
  
  Proceedings of the 26th Asian Technical Exchange and Advisory Meeting on Marine Structure
  
  Pages: 99-102
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] A Study on Finite Element Analysis and Stress Evaluation in Consideration of a Design2012
- Author(s)
  Ueshige Y., Tanimine T., Kitamura M., Takezawa A., et.al.
- Journal Title
  
  Proceedings of the 26th Asian Technical Exchange and Advisory Meeting on Marine Structure
  
  Pages: 95-98
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360356
[Journal Article] 降伏及び座屈応力を考慮した船体二重底部構造最適化に関する研究-船体二重底形状と板厚を設計変数とした構造最適化における構造的考察-2011
- Author(s)
  上寺哲也, 北村充, 濱田邦裕, 他
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: 14 Pages: 1-8
- NAID
  10030136996
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 小木曽望:縮約された線形システムを用いた不確定荷重に対するロバストトポロジー最適化2011
- Author(s)
  新居悟, 竹澤晃弘, 北村充
- Journal Title
  
  日本機械学会論文集A編
  
  Pages: 472-482
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Shape and SizeOptimization of the Double BottomStructure of Bulk Carrier at theInitial Design Stage with FiniteElement Analysis, Proc.2011
- Author(s)
  Kitamura, M., Uedera, T., Hamada, K. Takezawa, A.
- Journal Title
  
  of the 21stInt. Offshore and Polar Engineering Conf
  
  Pages: 839-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A study on design support system for ship principal particulars in consideration of uncertainties2011
- Author(s)
  Hamada, K., Kitamura, M., Hirata, N., et.al
- Journal Title
  
  Proceedings of the 25th Asian Technical Exchange and Advisory Meeting on Marine Structure
  
  Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 大槻康明:降伏及び座屈応力を考慮した船体二重底部構造最適化に関する研究-船体二重底形状と板厚を設計変数とした構造最適化における構造的考察-2011
- Author(s)
  上寺哲也, 北村充, 濱田邦裕
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: Vol.14 Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Shape and Size Optimization of the Double Bottom Structure of Bulk Carrier at the Initial Design Stage with Finite Element Analysis2011
- Author(s)
  Kitamura, M., Uedera, T., Hamada, K., Takwezawa, A.
- Journal Title
  
  Proceedings of the Twenty-first (2011) International Offshore and Polar Engineering Conference
  
  Pages: 839-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 製品情報の不確定性を考慮した船舶主要目設計支援システムに関する研究2011
- Author(s)
  濱田邦裕, 北村充, 高延宣文, 羽奈洋介
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: Vol.13 Pages: 239-248
- NAID
  10029345808
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Topology optimization for worst load conditions based on the eigenvalue analysis of an aggregated linear system2011
- Author(s)
  Takezawa, A., Nii, S., Kitamura, M., Kogiso, N.
- Journal Title
  
  Computer Methods in Applied Mechanics and Engineering
  
  Volume: 200 Pages: 2268-2281
- NAID
  120003001428
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A studyon design support system for shipprincipal particulars in considerationof uncertainties2011
- Author(s)
  Tokumoto, H., Hamada, K., Kitamura, M., Hirata, N. and Hana, Y
- Journal Title
  
  Y.:A studyon design support system for shipprincipal particulars in considerationof uncertainties
  
  Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of Block Division considering Information Uncertainty2011
- Author(s)
  Hamada, K., Kitamura M., et.al.
- Journal Title
  
  Proceedings of the International Conference on Computer Applications in Shipbuilding 2011
  
  Volume: 3 Pages: 23-30
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Topology optimization forworst load conditions based on theeigenvalue analysis of an aggregatedlinear system2011
- Author(s)
  Takezawa, A., Nii, S., Kitamura, M. Kogiso, N.
- Journal Title
  
  Computer Methods in Applied Mechanics and Engineering
  
  Volume: Vol.200 Pages: 2268-2281
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Shape Optimization Systemof Bottom Structure of ShipIncorporating Individual MeshSubdivision and Multi-Point Constraint2011
- Author(s)
  Kitamura, M., Uedera, T., Hamada, K. Takezawa, A
- Journal Title
  
  Int. Journal of Offshore and Polar Engineering
  
  Volume: Vol.21, No.3 Pages: 209-215
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Shape Optimization System of Bottom Structure of Ship Incorporating Individual Mesh Subdivision and Multi-Point Constraint2011
- Author(s)
  Kitamura, M., Uedera, T., Hamada, K., Takwezawa, A.
- Journal Title
  
  International Journal of Offshore and Polar Engineering
  
  Volume: 21-3 Pages: 209-215
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 製品情報の不確定性を考慮した船舶主要目設計支援システムに関する研究2011
- Author(s)
  濱田邦裕, 北村充, 他
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: 13 Pages: 239-248
- NAID
  10029345808
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of BlockDivision considering InformationUncertainty, Proc. of the Int2011
- Author(s)
  Varikkattu K. K., Hamada, K., Kitamura M.
- Journal Title
  
  Conf. on Computer Applications in Shipbuilding
  
  Volume: Vol.III Pages: 23-30
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Robust topologyoptimization for the worst load casebased on aggregation of linear system2010
- Author(s)
  Nii, S., Takezawa, A., Kitamura, M. Kogiso, N
- Journal Title
  
  Proc. of the 13th AIAA/ ISSMO Multidisciplinary Analysis Optimization Conf.
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 3Dプロダクトモデルを利用した船体中央横断面の総合的最適化に関する研究-既存船舶情報に基づいた構造最適設計-2010
- Author(s)
  中森隆一, 北村充, 濱田邦裕
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: Vol.11 Pages: 81-88
- NAID
  10026570395
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Structural Optimizationof the Mid-ship Section of a BulkCarrier with Aid of a Three-DimensionalProduct Model2010
- Author(s)
  Kitamura, M., Nakamori, T., Hamada, K. Takwezawa, A
- Journal Title
  
  6th China-Japan-KoreaJoint Symposium on Optimization ofStructural and Mechanical Systems
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Structural Optimization of the Mid-ship Section of a Bulk Carrier with Aid of a Three-Dimensional Product Model2010
- Author(s)
  Kitamura, M., Hamada, K., et.al
- Journal Title
  
  Proc.of 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems
  
  Volume: (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 3Dプロダクトモデルを利用した船体中央横断面の総合的最適化に関する研究2010
- Author(s)
  中森隆一, 北村充, 濱田邦裕
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: 11 Pages: 81-88
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Robust topology optimization for theworst load case2010
- Author(s)
  Nii, S., Takezawa, A., Kitamura, M
- Journal Title
  
  6th China-Japan-KoreaJoint Symposium on Optimization ofStructural and Mechanical Systems
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A Study on Design Support System for Ship Principal Particulars in Consideration of the Accuracies of the Analyses2009
- Author(s)
  Hamada, K., Kitamura, M., Takezawa, A., et al.
- Journal Title
  
  Proc.of COMPIT 2009
  
  Pages: 238-246
- NAID
  110007043732
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of Block Divisionusing Nodal Cut Set Method inConsideration of Production Stages inShip Hull Construction2009
- Author(s)
  VarikkattuK. K., Hamada, K. Kitamura, M.
- Journal Title
  
  Proc. of the19th Int. Offshore and Polar Engineering Conf.
  
  Pages: 787-794
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A Multi-Step DesignOptimization Method for Mid-ShipSections2009
- Author(s)
  Hamada, K., Kitamura, M., Talezawa, A. Kanaikari, K
- Journal Title
  
  Ship Technology Research
  
  Volume: Vol.56 Pages: 110-120
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A DesignOptimization Method for Bridge Wing ofBulker Improving Anti-VibrationCharacteristics, Proc2009
- Author(s)
  Takezawa, A., Kaneno, Y., Kitamura, M., Hamada, K. Takezawa, A., Kaneno, Y.
- Journal Title
  
  of the 8th Int. Conf. on Computer and IT Applicationsin the Maritime Industries
  
  Pages: 238-246
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of Block Division Using Nodal Cut Set Method2009
- Author(s)
  Varikkattu K. K., Hamada, K., Talezawa, A., Kitamura, M.
- Journal Title
  
  Ship Technology Research 56(印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] 船舶初期設計プロセスを対象とした設計プロセスシミュレータの開発2009
- Author(s)
  濱田邦裕, 北村充, 他
- Journal Title
  
  日本船舶海洋工学会論文集 9(印刷中)
- NAID
  110007341091
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] A Multi-Step Design Optimization Method for Mid-Ship Sections2009
- Author(s)
  Hamada, K., Kitamura, M., Talezawa, A., et.al.
- Journal Title
  
  Ship Technology Research 56
  
  Pages: 110-120
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 船舶初期設計プロセスを対象とした設計プロセスシミュレータの開発2009
- Author(s)
  濱田邦裕, 北村充, 他
- Journal Title
  
  日本船舶海洋工学会論文集 9
  
  Pages: 211-222
- NAID
  110007341091
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of Block Division Using Nodal Cut Set Method in Consideration of Production Stages in Ship Hull Construction2009
- Author(s)
  Varikkattu K. K, Hamada, K., Kitamura, M.
- Journal Title
  
  Proc. of ISOPE 2009 (印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] A Design Optimization Method for Bridge Wing of Bulker Improving Anti-vibration Characteristic2009
- Author(s)
  Takezawa, A., Kaneno, Y., Kitamura, M., Hamada, K.
- Journal Title
  
  Proc.of COMPIT 2009
  
  Pages: 29-37
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A Study on Design Support System for Ship Principal Particulars in Consideration of the Accuracies of the Analyses2009
- Author(s)
  Hamada, K., Kitamura, M., Takezawa, A., et al.
- Journal Title
  
  Proc. of COMPIT 2009 (印刷中)
- NAID
  110007043732
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Development of Design Process Simulator for the Ship Initial Design Stage2009
- Author(s)
  濱田邦裕, 北村充, et.al.
- Journal Title
  
  Proc.of ICCAS 2009 II
  
  Pages: 27-37
- NAID
  110007341091
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Development ofDesign Process Simulator for the ShipInitial Design Stage2009
- Author(s)
  Hamada, K., Kitamura, M., Yasui, S., Kawasaki, H., Hana, Y.
- Journal Title
  
  Proc. of the Int. Conf. on Computer Applications in Shipbuilding 2009
  
  Volume: Vol.II Pages: 27-37
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A Study on Design SupportSystem for Ship Principal Particularsin Consideration of the Accuracies ofthe Analyses2009
- Author(s)
  Hamada, K., Kitamura, M., Takezawa, A. Takanobu, Y
- Journal Title
  
  Proc. of the 8th Int. Conf. on Computer and IT Applications in theMaritime Industries
  
  Pages: 29-37
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of BlockDivision Using Nodal Cut Set Method2009
- Author(s)
  VarikkattuK. K., Hamada, K., Talezawa, A. Kitamura, M
- Journal Title
  
  Ship Technology Research
  
  Volume: Vol.56 Pages: 142-152
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of Block Division Using Nodal Cut Set Method2009
- Author(s)
  Varikkattu K.K., Hamada, K., Talezawa, A., Kitamura, M.
- Journal Title
  
  Ship Technology Research 56
  
  Pages: 142-152
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] Optimization of Block Division Using Nodal Cut Set Method in Consideration of Production Stages in Ship Hull Construction2009
- Author(s)
  Varikkattu K.K., Hamada, K., Kitamura, M.
- Journal Title
  
  Proc.of ISOPE 2009
  
  Pages: 787-794
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] 船舶初期設計プロセスを対象とした設計プロセスシミュレータの開発2009
- Author(s)
  濱田邦裕, 北村充, 安井聡一, 川崎裕
- Journal Title
  
  日本船舶海洋工学会論文集
  
  Volume: Vol.9 Pages: 211-222
- NAID
  110007341091
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360432
[Journal Article] A study on Robust Optimization of Principal Particulars2008
- Author(s)
  Hamada, K., Kitamura, M., et al
- Journal Title
  
  Proc. of TEAM 2008
  
  Pages: 401-406
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] 独立要素分割と多点拘束を利用した船体構造二重底部の形状および寸法最適設計に関する研究2008
- Author(s)
  北村充, 濱田邦裕, 竹澤晃弘, 他
- Journal Title
  
  日本船舶海洋工学会論文集 7
  
  Pages: 89-96
- NAID
  110006965122
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Multi-step Optimization Method and its Application to the Design of Mid-ship Section of Ship Structure2008
- Author(s)
  Kitamura, M., Hamada, K., Takezawa, A., et al.
- Journal Title
  
  Proc. of 3^<rd> PAAMS and AMEC2008
  
  Pages: 944-956
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] 解析手法の精度を考慮した船舶主要目設計支援システムに関する研究2008
- Author(s)
  濱田邦裕, 北村充, 他
- Journal Title
  
  日本船舶海洋工学会論文集 8
  
  Pages: 265-272
- NAID
  110007043732
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] 船体中央断面最適設計の実用化と高速最適化システムの開発に関する研究2007
- Author(s)
  北村充, 濱田邦裕, 他
- Journal Title
  
  日本船舶海洋工学会論文集 6
  
  Pages: 141-149
- NAID
  110006614131
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Multi-step Optimization Method and its Application to the Design of Mid-ship Section of Ship Structure2007
- Author(s)
  Kitamura, M., Hamada, K. 他
- Journal Title
  
  Proc. of the 3rd Asian-Pacific Congress on Computational Mechanics (CD-ROM)
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Optimization System of Block Division Using Genetic Algorithm and Product Model2007
- Author(s)
  Wibisono, M. A., Hamada, K., Kitamura, M.他
- Journal Title
  
  日本船舶海洋工学会論文集 6
  
  Pages: 109-118
- NAID
  110006614128
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Development of optimal structure design system for mid-ship section2007
- Author(s)
  Kitamura, M., Hamada, K. 他
- Journal Title
  
  Proc. of 2nd Int. Conf. on Computational Methods (CD-ROM)
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Shape optimization of ship structure by multiple point constraint and individual mesh sub-division techniques2007
- Author(s)
  Kitamura, M., Hamada, K. 他
- Journal Title
  
  Proc. of 2nd Int. Conf. on Computational Methods (CD-ROM)
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] Neural Network System with Lead Factor as Alternative Method for Structure Analysis by Finite Element Method2007
- Author(s)
  Kitamura, M., Hamada, K. 他
- Journal Title
  
  Computational Methods, Springer
  
  Pages: 867-875
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] A Study on Size and Thickness Optimizations for the Bottom Structure of Ship2007
- Author(s)
  Kitamura, M., Hamada, K. 他
- Journal Title
  
  Proc. of the 3rd Asian-Pacific Congress on Computational Mechanics (CD-ROM)
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] 船体構造の形状最適設計に関する研究2006
- Author(s)
  北村充, 濱田邦裕他
- Journal Title
  
  日本船舶海洋工学会講演会論文集 3
  
  Pages: 141-142
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] 船体中央断面の構造最適設計に関する研究2006
- Author(s)
  北村充, 濱田邦裕他
- Journal Title
  
  日本船舶海洋工学会講演会論文集 3
  
  Pages: 131-132
- Data Source
  KAKENHI-PROJECT-18360418
[Journal Article] webによる確認テストと詳細資料の提供およびその効果2005
- Author(s)
  北村充
- Journal Title
  
  平成17年度工学・工業教育研究講演会講演論文集 1
  
  Pages: 110-111
- Data Source
  KAKENHI-PROJECT-16656271
[Journal Article] 広島大学次期学生情報システム構築に関する基礎的研究2004
- Author(s)
  北村充, 濱田邦裕, 山本元道, 江藤浩之
- Journal Title
  
  平成16年度工学・工業教育研究講演会講演論文集 1
  
  Pages: 455-456
- Data Source
  KAKENHI-PROJECT-16656271
[Presentation] Multi-step static condensation for creating stiffness matrix of superelements2023
- Author(s)
  Lee Jungho, Tomohiro Fujita, Takeki Yamamoto, Mitsuru Kitamura
- Organizer
  The 36th Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures ( TEAM 2023 BUSAN, South Korea)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K21008
[Presentation] Design of Sandwich Panel Structure by 2 Step Optimization of Fully Stressed Design and Genetic Algorithm2022
- Author(s)
  Shin Sasaki, Mitsuru Kitamura, Akihiro Takezawa
- Organizer
  Asian Congress of Structural and Multidisciplinary Optimization 2022 (ACSMO 2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K21008
[Presentation] A study on high-frequency vibration analysis of ship hull structures2017
- Author(s)
  荒木惟弘，北村充，竹澤晃弘
- Organizer
  日本船舶海洋工学会秋季講演会
- Data Source
  KAKENHI-PROJECT-16H04603
[Presentation] A Study on Optimizing the Structures which Set the Number of Member Subjects and Plate Thickness to the Design Variable2013
- Author(s)
  Ryota Nonami, Mitsuru Kitamura, Akihiro Takezawa, Shinichi Hirakawa
- Organizer
  World Congress on Structural and Multidisciplinary Optimization
- Place of Presentation
  Orlando, Florida. USA
- Data Source
  KAKENHI-PROJECT-24360356
[Presentation] 調和CSR対応直接計算ソフトウェアの防振最適設計への活用に関する研究2013
- Author(s)
  能勢統章，大福将史，竹澤晃弘，北村充
- Organizer
  日本船舶海洋工学会平成25年秋季講演会
- Place of Presentation
  大阪府立大学 I-siteなんば
- Data Source
  KAKENHI-PROJECT-24360356
[Presentation] 振動解析に基づくトポロジー最適化による非破壊検査での損傷特定手法2013
- Author(s)
  西津卓史，竹澤晃弘，北村充
- Organizer
  日本船舶海洋工学会平成25年秋季講演会
- Place of Presentation
  大阪府立大学 I-siteなんば
- Data Source
  KAKENHI-PROJECT-24360356
[Presentation] ワイルドカードGAを利用した船舶設計プロセスの最適化に関する研究2013
- Author(s)
  濱田邦裕，藤井亮，弘中睦己，平田法隆，北村充
- Organizer
  日本船舶海洋工学会平成25年春季講演会
- Place of Presentation
  広島国際会議場
- Data Source
  KAKENHI-PROJECT-24360356
[Presentation] トポロジー最適化を活用した新機関室モジュール搭載船の構想設計2011
- Author(s)
  加藤聡士, 竹澤晃弘, 北村充
- Organizer
  第16回計算工学講演会
- Place of Presentation
  東京大学
- Year and Date
  2011-05-26
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] モジュール化を考慮した船体構造最適化に関する研究2011
- Author(s)
  中村大輔, 加藤聡士, 北村充, 竹澤晃弘
- Organizer
  日本機械学会第21回設計工学・システム部門講演会
- Place of Presentation
  山形大学
- Year and Date
  2011-10-23
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] CSRに基づいたオイルタンカー中央断面の最適設計に関する研究2011
- Author(s)
  三宅広剛, 北村充, 竹澤晃弘
- Organizer
  日本機械学会第21回設計工学・システム部門講演会
- Place of Presentation
  山形大学
- Year and Date
  2011-10-23
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 船舶機関部モジュール支持構造の最適設計に関する研究2011
- Author(s)
  川崎航平, 竹澤晃弘, 北村充
- Organizer
  日本船舶海洋工学会平成23年度春季講演会
- Place of Presentation
  福岡市
- Year and Date
  2011-05-20
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 船舶機関部モジュール支持構造の最適設計に関する研究2011
- Author(s)
  川崎航平, 竹澤晃弘, 北村充
- Organizer
  日本船舶海洋工学会平成23年春季講演会
- Place of Presentation
  九州大学
- Year and Date
  2011-05-20
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] トポロジー最適化を活用した新機関室モジュール搭載船の構想設計2011
- Author(s)
  加藤聡士, 竹澤晃弘, 北村充
- Organizer
  第16回計算工学講演会
- Place of Presentation
  東京都
- Year and Date
  2011-05-26
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] CSRに基づいたオイルタンカー中央断面の最適設計に関する研究2011
- Author(s)
  三宅広剛, 北村充, 竹澤晃弘
- Organizer
  日本機械学会第21回設計工学・システム部門講演会
- Place of Presentation
  米沢市
- Year and Date
  2011-10-23
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] モジュール化を考慮した船体構造最適化に関する研究2011
- Author(s)
  中村大輔, 加藤聡士, 北村充, 竹澤晃弘
- Organizer
  日本機械学会第21回設計工学・システム部門講演会
- Place of Presentation
  米沢市
- Year and Date
  2011-10-23
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 製品情報の不確定性を考慮した船舶主要目の多目標最適化に関する研究2010
- Author(s)
  濱由邦裕, 北村充, 他
- Organizer
  平成22年度日本船舶海洋工学会春季講演会
- Place of Presentation
  東京都
- Year and Date
  2010-06-08
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 統合・簡易化された線形システムに基づくロバストトポロジー最適化2010
- Author(s)
  新居悟, 竹澤晃弘, 北村充
- Organizer
  日本計算工学会第15回計算工学講演会
- Place of Presentation
  博多市
- Year and Date
  2010-05-28
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 製品情報の不確定性を考慮した船舶主要目の多目標最適化に関する研究2010
- Author(s)
  濱田邦裕, 北村充, 高延宣文, 羽奈洋介
- Organizer
  平成22年度日本船舶海洋工学会春季講演会
- Place of Presentation
  東京都
- Year and Date
  2010-06-08
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] カーリング配置を考慮した船体二重底構造の最適設計に関する研究2010
- Author(s)
  谷峰輝彦, 北村充, 濱田邦裕, 竹澤晃弘
- Organizer
  平成22年度日本船舶海洋工学会春季講演会
- Place of Presentation
  東京都
- Year and Date
  2010-06-08
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] カーリング配置を考慮した船体二重底構造の最適設計に関する研究2010
- Author(s)
  濱田邦裕, 北村充, 他
- Organizer
  平成22年度日本船舶海洋工学会春季講演会
- Place of Presentation
  東京都
- Year and Date
  2010-06-08
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 不確定性を考慮した最適化のためのワイルドカードGAの提案と主要目設計への適用2010
- Author(s)
  濱田邦裕, 北村充, 他
- Organizer
  平成22年度日本船舶海洋工学会秋季講演会
- Place of Presentation
  佐世保市
- Year and Date
  2010-11-05
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 不確定性を考慮した最適化のためのワイルドカードGAの提案と主要目設計への適用2010
- Author(s)
  濱田邦裕, 羽奈洋介, 平田法隆, 北村充
- Organizer
  平成22年度日本船舶海洋工学会秋季講演会
- Place of Presentation
  佐世保市
- Year and Date
  2010-11-05
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 大型構造物の最適設計に関する研究2009
- Author(s)
  北村充, 濱田邦裕, 竹澤晃弘
- Organizer
  第58回理論応用力学講演会
- Place of Presentation
  東京都
- Year and Date
  2009-06-11
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 船体二重底構造と中央断面の多段階最適設計に関する研究2009
- Author(s)
  北村充, 金碇広平, 近藤史彦, 濱田邦宏, 竹澤晃弘
- Organizer
  日本計算工学会第14回計算工学講演会
- Place of Presentation
  東京都目黒区駒場
- Year and Date
  2009-05-12
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] Shape Optimization of ShipDouble Bottom Structure with Aid ofIdealized Composition of Ship2009
- Author(s)
  Kitamura, M., Uedera, T., Hamada, K., Takezawa A.
- Organizer
  The 10thUS National Congress on ComputationalMechanics
- Place of Presentation
  Columbus, Ohio, U. S. A
- Year and Date
  2009-07-17
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 解析手法の精度に着目した船舶主要目設計プロセスの多目標最適化に関する研究2009
- Author(s)
  濱田邦裕, 北村充, 他
- Organizer
  平成21年度日本船舶海洋工学会秋季講演会
- Place of Presentation
  熊本市
- Year and Date
  2009-11-20
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 大型構造物の最適設計に関する研究2009
- Author(s)
  北村充, 濱田邦裕, 竹澤晃弘
- Organizer
  第58回理論応用力学講演会
- Place of Presentation
  東京都港区六本木
- Year and Date
  2009-06-11
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 船体二重底構造と中央断面の多段階最適設計に関する研究2009
- Author(s)
  北村充, 金碇広平, 近藤史彦, 濱田邦裕, 竹澤晃弘
- Organizer
  日本計算工学会第14回計算工学講演会
- Place of Presentation
  東京都
- Year and Date
  2009-05-12
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 解析手法の精度に着目した船舶主要目設計プロセスの多目標最適化に関する研究2009
- Author(s)
  濱田邦裕, 牟田和貴, 北村充
- Organizer
  平成21年度日本船舶海洋工学会秋季講演会
- Place of Presentation
  熊本市
- Year and Date
  2009-11-20
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] トポロジー最適化を用いた船体上部構造の防振設計に関する研究2009
- Author(s)
  竹澤晃弘, 金野有里, 松本麻里, 北村充, 濱田邦裕, 大槻康明
- Organizer
  日本機械学会第20回設計工学・システム部門講演会
- Place of Presentation
  沖縄県読谷村
- Year and Date
  2009-10-28
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] Shape Optimization of Ship Double Bottom Structure with Aid of Idealized Composition of Ship2009
- Author(s)
  Mitsuru Kitamura, Tetsuya Uedera, Kunihiro Hamada, et al.
- Organizer
  The 10th US National Congress on Computational Mechanics
- Place of Presentation
  Columbus, Ohio, U.S.A
- Year and Date
  2009-07-17
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 大槻康明:トポロジー最適化を用いた船体上部構造の防振設計に関する研究2009
- Author(s)
  竹澤晃弘, 金野有里, 松本麻里, 北村充, 濱田邦裕
- Organizer
  日本機械学会第20回設計工学・システム部門講演会
- Place of Presentation
  沖縄県読谷村
- Year and Date
  2009-10-28
- Data Source
  KAKENHI-PROJECT-21360432
[Presentation] 船体中央断面の多段階最適設計に関する研究2008
- Author(s)
  北村充, 他
- Organizer
  日本機械学会第18回設計工学・システム部門講演会
- Place of Presentation
  京都市
- Year and Date
  2008-09-25
- Data Source
  KAKENHI-PROJECT-18360418
[Presentation] 船体モデルの部材認識と船体二重底構造の最適化に関する研究2008
- Author(s)
  北村充, 他
- Organizer
  日本機械学会第18回設計工学・システム部門講演会
- Place of Presentation
  京都市
- Year and Date
  2008-09-25
- Data Source
  KAKENHI-PROJECT-18360418

1. FUJIKUBO Masahiko (30156848)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
2. NOBUKAWA Hisashi (60034344)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
3. HAMADA Kunihiro (40294540)

# of Collaborated Projects: 6 results

# of Collaborated Products: 66 results
4. HIRATA Noritaka (80181163)

# of Collaborated Projects: 5 results

# of Collaborated Products: 5 results
5. YANAGIHARA Daisuke (10294539)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
6. YAMAMOTO Motomichi (30274111)

# of Collaborated Projects: 4 results

# of Collaborated Products: 1 results
7. TAKEZAWA Akihiro (10452608)

# of Collaborated Projects: 4 results

# of Collaborated Products: 43 results
8. YAO Tetsuya (20029284)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
9. MASAOKA Koji (10244659)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
10. KOSE Kuniji (40034409)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
11. HIGO Yasushi (20156582)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. KOBAYASHI Shinji (80284173)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. OKAZAWA Shigenobu (10312620)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
14. 安川宏紀 (40363022)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
15. UEDERA Tetsuya (10342552)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
16. TAKAKI Mikio (00038556)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. SAITO Kimio (50029279)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. SUMI Yoichi (80107367)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. KAWAMURA Yasumi (50262407)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. FUSHIMI Akira (10272379)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. ZHOU Guoqiang (90271072)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. KIM Yuchol (20144529)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. HAYASHI Shigehiro (60263216)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. TAKASE Satoru (10253105)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. HIRAO Saburo (70181138)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. FUJIMOTO Yukio (60136140)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. SHINOZAKI Kenji (70154218)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. 岩沢和男 (30314777)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 隅谷孝洋 (90231381)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 高橋勝彦 (00187999)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. 武市祥司 (90291319)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. 田中義和 (00335704)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. 田中智行 (20452609)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. 山本剛大 (00802860)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
35. 野波諒太 (70849562)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. Nakamori Takakazu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. Hirakawa Shinichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
38. 鎌田岳

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. 原田実

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Kitamura Mitsuru 北村 充

KITAMURA Mitsuru 北村 充

Research Projects

Research Products

Co-Researchers

領域有限要素法と接続部材反力推定を用いた船舶全体構造の最適化に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on relationship between ship structure and noise transmission route and research on creation of structure to reduce noise levelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

造船技術者育成のためのe-Learningシステム構築とその有効性に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on analysis model for simulating hot cracking phenomenon at heat affected zone of weldmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Accurate Zooming Analysis for Ship StructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Kitamura Mitsuru 北村充

KITAMURA Mitsuru 北村充