Fujimoto Hitoshi 藤本仁

… Alternative Names

FUJIMOTO HITOSHI 藤本仁

FUJIMOTO Hitoshi 藤本仁

Less

Researcher Number	40229050
Other IDs	https://orcid.org/0000-0001-6772-1097
External Links
Affiliation (Current)	2024: 京都大学, エネルギー科学研究科, 教授
Affiliation (based on the past Project Information) *help	2020 – 2022: 京都大学, エネルギー科学研究科, 教授 2015 – 2017: 京都大学, エネルギー科学研究科, 准教授 2012: 京都大学, 大学院・エネルギー科学研究科, 准教授 2007 – 2012: 京都大学, エネルギー科学研究科, 准教授 2009: 京都大学, 大学院・エネルギー科学研究科, 准教授 … More 2004 – 2006: 京都大学, エネルギー科学研究科, 助教授 2000: Kyoto University, Energy Science, Research Associate, エネルギー化学研究科, 助手 1996 – 2000: Kyoto University, Department of Energy Science and Technology, Instructor, エネルギー科学研究科, 助手 1999: 京都大学, 大学院・エネルギー科学研究科, 助手 1992 – 1995: 京都大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Thermal engineering / Material processing/treatments / Basic Section 19020:Thermal engineering-related Except Principal Investigator Material processing/treatments / 金属加工(含鋳造) / Material processing/treatments
Keywords	Principal Investigator スプレー冷却 / 沸騰 / 液滴 / 可視化実験 / 数値解析 / spray cooling / numerical simulation / free surface / 自由表面 / 対流 … More / ライデンフロスト温度 / 赤外線サーモグラフィー / 逆解析 / 移動体冷却 / 沸騰伝熱 / 高分子ポリマー / 水溶性高分子ポリマー / 焼き入れ噴霧冷却 / 沸騰熱伝達 / 熱分解 / 水溶性ポリマー / droplet dynamics / flow visualization / boiling heat transfer / aqueous polymer / photography / interaction phenomena / droplet / 数値シミュレーション / 伝熱 / 3次元数値解析 / 干渉 / 観察実験 / 相互干渉 / boiling / Reynolds number / Weber number / Collision of droplets / 熱伝達 / 表面張力 / ヌセルト数 / 気泡 / ウェーバー数 / レイノルズ数 / ウェーバ数 / 液滴衝突 / 熱工学 / 可視化 / スプレーノズル / 熱伝導率 / フェーバー数 / 熱伝達率 … More Except Principal Investigator 自由表面 / 数値解析 / Leidenfrost temperature / ライデンフロスト温度 / free surface / numerical analysis / Weber number / スプレー冷却 / 液滴の変形挙動 / ウェーバー数 / ウェーバ数 / Film boiling heat transfer / Estimation of cooling capacity / 濡れ現象 / 熱伝達 / 冷却能評価 / 成形限界 / 板材成形 / Black Zone / Boiling / Vapor filw / liguid Interface / Solid / Wething Pheaomenon / Leidenfrost point / Hot wetallic surface / 固液接触 / レイノルズ数 / ブラックゾーン / 沸騰 / 蒸気膜 / 固液界面 / ライデンフロスト点 / 超高温金属表面 / FE simulation / Forming limit / Steel sheet / Sheet forming / 有限要素シミュレーション / 鋼板 / immersion nozzle / water model / multi-fluid model / multi-phase flow / powder entrapping / mold / 流動様式 / 浸漬ノズル / 水モデル / 多流体モデル / 混相流 / パウダー巻き込み / モ-ルド / surface material / spray cooling / surface tension / deformation process of droplet / 表面粗さ / 液滴粒子 / 変形挙動 / 表面の材質 / 表面張力 / Predictable modelling / Collision and deformation of droplet on a plate / Gas-particle two-phase flow / Water spray / Mist flow / 濡れ点 / 水量密度 / ローディング比 / 冷却能制御 / 気一液の相流 / 予知モデル / 膜沸騰熱伝達 / 平板に衝突する液滴の変形 / 二相流 / スプレー流 / ミスト流 / Nusselt number / Water film flow / Last finisher / Laminar cooling / Hotrun table / 流れ場 / 膜沸騰 / 高温鋼板 / 冷却プロセス / ラミナー流 / ホットランテーブル / ヌッセルト数 / 水膜流 / 最終圧延 / ラミナー冷却 / ホットランテーブル / 摩擦低減効果 / 圧力媒体流出 / 液圧分布 / 対向液圧成形 / 有限要素法 / 延性破壊条件式 Less

Development of evaluation method of heat transfer characteristics in droplet impact on moving hot solidPrincipal Investigator
- Principal Investigator
  
  Fujimoto Hitoshi
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 19020:Thermal engineering-related
- Research Institution
  Kyoto University
Transient contact behavior of aqueous polymer solution droplets with hot solid and formation process of polymer enriched-layerPrincipal Investigator
- Principal Investigator
  
  FUJIMOTO HITOSHI
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Kyoto University
Hydrodynamics and boiling phenomena of droplets impinging on hot solidPrincipal Investigator
- Principal Investigator
  
  FUJIMOTO Hitoshi
- Project Period (FY)
  2009 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Kyoto University
Outflow characteristics of a pressure medium during sheet hydroforming and its finite element modeling
- Principal Investigator
  
  TAKUDA Hirohiko
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
Deformation behavior and heat transfer of droplets successively impinging onto a solid substratePrincipal Investigator
- Principal Investigator
  
  FUJIMOTO Hitoshi
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  Kyoto University
Interfacial phenomena of coolant contacting with superhot surface
- Principal Investigator
  
  HATTA Natsao
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  Material processing/treatments
- Research Institution
  Nippon Bunri University
  Kyoto University
Collision Dynamics of Droplets Impinging into a Hot SolidPrincipal Investigator
- Principal Investigator
  
  FUJIMOTO Hitoshi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
Formability of special steel sheets of high quality and its prediction
- Principal Investigator
  
  TAKEDA Hirohiko
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
板材成形における成形限界予測への延性破壊条件式の適用
- Principal Investigator
  
  TAKUDA Hirohiko
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
ライデンフロスト点以上の温度をもつ金属表面のスプレーによる冷却能評価Principal Investigator
- Principal Investigator
  
  藤本仁
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
Deformation behavior of a liquid droplet impinging on hot metallic surfaces above the Leidenfrost temperature
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
Prediction and control of powder entrapping at meniscus of molten steel in a continuous casting mold
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
高温金属表面の酸化被膜がスプレー冷却の冷却特性に及ぼす影響Principal Investigator
- Principal Investigator
  
  藤本仁
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  Kyoto University
Prediction and control of flow properties and cooling process for a hot strip on a runout table by water film
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  KYOTO UNIVERSITY
Development of optimum cooling systemn of water spraying for a high temperature metal
- Principal Investigator
  
  HATTA Natsuo
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  KYOTO UNIVERSITY

[Journal Article] Flow Visualization and Heat Transfer Characteristics of Droplet Train Obliquely Impinging on a Moving Hot Solid2023
- Author(s)
  建部勝利, 藤田俊輔, 藤本仁
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 109 Issue: 7 Pages: 592-604
- DOI
  10.2355/tetsutohagane.TETSU-2022-131
- ISSN
  0021-1575, 1883-2954
- Year and Date
  2023-07-01
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K04326
[Journal Article] Development of Flow Visualization Measurement Method of Droplet Train Obliquely Impinging on Moving Hot Solid2022
- Author(s)
  Katsutoshi Tatebe, Hiroaki Takeshita, Yoshihiro Serizawa, Hitoshi Fujimoto
- Journal Title
  
  ISIJ International
  
  Volume: 62 Issue: 3 Pages: 542-549
- DOI
  10.2355/isijinternational.ISIJINT-2021-427
- NAID
  130008129953
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2022-03-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K04326
[Journal Article] Development of a Method for Evaluating Heat Transfer Characteristics of a Circular Water Jet Impinging on a Moving Flat Plate2022
- Author(s)
  建部勝利 , 塩入悠太 , 藤田俊輔 , 藤本仁
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 108 Issue: 11 Pages: 823-834
- DOI
  10.2355/tetsutohagane.TETSU-2022-051
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K04326
[Journal Article] Development of Flow Visualization Measurement Method of Droplet Train Obliquely Impinging on Moving Hot Solid2021
- Author(s)
  Tatebe Katsutoshi、Takeshita Hiroaki、Serizawa Yoshihiro、Fujimoto Hitoshi
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 107 Issue: 2 Pages: 128-136
- DOI
  10.2355/tetsutohagane.TETSU-2020-091
- NAID
  130007978259
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K04326
[Journal Article] Transient contact behavior of aqueous polymer solution droplets with transparent hot solid2018
- Author(s)
  Hitoshi Fujimoto, Shogo Sakane, Takayuki Hama, Hirohiko Takuda
- Journal Title
  
  Experimental Thermal and Fluid Science
  
  Volume: 96 Pages: 1-10
- DOI
  10.1016/j.expthermflusci.2018.02.026
- NAID
  120006596511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05825
[Journal Article] Deformation behavior of two droplets successively impinging obliquely on hot solid surface2017
- Author(s)
  Hitoshi Fujimoto, Soushi Yoshimoto, Ken Takahashi, Takayuki Hama, Hirohiko Takuda
- Journal Title
  
  Experimental Thermal and Fluid Science
  
  Volume: 81 Pages: 136-146
- DOI
  10.1016/j.expthermflusci.2016.10.009
- NAID
  120006305977
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05825
[Journal Article] Hydrodynamics and heat transfer characteristics of oil-in-water emulsion droplets impinging on hot stainless steel foil2017
- Author(s)
  Hitoshi Fujimoto, Wataru Obana, Masayoshi Ashida, Takayuki Hama, Hirohiko Takuda
- Journal Title
  
  Experimental Thermal and Fluid Science
  
  Volume: 85 Pages: 201-212
- DOI
  10.1016/j.expthermflusci.2017.02.024
- NAID
  120006305976
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05825
[Journal Article] Successive Collision of Two Water Droplets with Hot Solid2013
- Author(s)
  Hitoshi Fujimoto
- Journal Title
  
  International Juournal of Transport Phenomena
  
  Volume: 14
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] An Experimental Study on the Oblique Collisions of Water Droplets with a Smooth Hot Solid2012
- Author(s)
  Hitoshi Fujimoto, Ryota Doi, and Hirohiko Takuda.
- Journal Title
  
  Transactions of the ASME Journal of Fluids Engineering
  
  Volume: 134-7 Issue: 7
- DOI
  10.1115/1.4006926
- NAID
  120006596491
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] An Experimental Study of the Deformation behavior of Water Droplets Impinging Obliquely on a Hot Substrate2010
- Author(s)
  Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Takayuki Hama, and Hirohiko Takuda
- Journal Title
  
  Journal of Flow Visualizaion and Image Processing
  
  Volume: 17-2 Issue: 2 Pages: 1-16
- DOI
  10.1615/jflowvisimageproc.v17.i2.20
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] Hydrodynamics and boiling phenomena of water droplets impinging on hot solid2010
- Author(s)
  Hitoshi Fujimoto, Yosuke Oku, Tomohiro Ogihara, Hirohiko Takuda
- Journal Title
  
  International Journal of Multiphase Flow
  
  Volume: 36-8 Issue: 8 Pages: 620-642
- DOI
  10.1016/j.ijmultiphaseflow.2010.04.004
- NAID
  120002484955
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] An Experimental Study of the Deformation behavior of Water Droplets Impinging Obliquely on a Hot Substrate2010
- Author(s)
  H.Fujimoto, et al.
- Journal Title
  
  Journal of Flow Visualization and Image Processing
  
  Volume: 17 Pages: 1-16
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] AN EXPERIMENTAL STUDY OF THE DEFORMATION BEHAVIOR OF WATER DROPLETS IMINGING OBLIQUELY ON A HOT SUBSTRATE2010
- Author(s)
  H.Fujimoto, H.Takuda, et al.
- Journal Title
  
  Journal of Flow Visualization and Image Processing 17(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] Experimental Study on Oblique Collisions of Water Droplets with Hot Solid2010
- Author(s)
  H.Fujimoto, et al.
- Journal Title
  
  IMECE2010
  
  Pages: 1-10
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] Hydrodynamics and boiling phenomena of water droplets impinging on hot solid2010
- Author(s)
  H.Fujimoto, et al.
- Journal Title
  
  International Journal of Multiphase Flow
  
  Volume: 36 Pages: 620-642
- NAID
  120002484955
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560212
[Journal Article] Correlation between sheet deformation and hydraulic pressure variation during sheet hydroforming2009
- Author(s)
  Hama, T., Matsushima, K., Kitajima, T., Fujimoto, H., Takuda, H.
- Journal Title
  
  ISIJ International 49
  
  Pages: 1736-1743
- NAID
  10027037763
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Outflow characteristics of a pressure medium during sheet hydroforming2009
- Author(s)
  Takayuki Hama, Ken Kurisu, Keita Hydraulic pressure /MPa Matsushima, Hitoshi Fujimoto, Hirohiko Takuda
- Journal Title
  
  ISIJ International 17930
  
  Pages: 239-246
- NAID
  10027033244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Outflow characteristics of a pressure medium during sheet hydroforming2009
- Author(s)
  Takayuki HAMA, Ken KURISU, Keita Matsushima, Hitoshi FUJIMOTO, Hirohiko TAKUDA
- Journal Title
  
  ISIJ International 49
  
  Pages: 239-246
- NAID
  10027033244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Correlation between sheet deformation and hydraulic pressure variation during sheet hydroforming2009
- Author(s)
  Takayuki Hama, Keita Matsushima, Toru Kitajima, Hitoshi Fujimoto, Hirohiko Takuda
- Journal Title
  
  ISIJ International 18203
  
  Pages: 1736-1743
- NAID
  10027037763
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560727
[Journal Article] Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate2007
- Author(s)
  H.Fujimoto, Y.Shiotani, A.Tong, T.Hama, H.Takuda
- Journal Title
  
  International Journal of Multiphase Flow 33
  
  Pages: 317-332
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Three-dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate2007
- Author(s)
  H.Fujimoto
- Journal Title
  
  International Journal of Multiphase Flow 33
  
  Pages: 317-332
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Interaction phenomena of two water droplets successively impacting onto a solid surface2007
- Author(s)
  H.Fujimoto
- Journal Title
  
  International Journal of Thermal Sciences (in press)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Numerical and experimental study on oblique collision of water droplet with a solid substrate2005
- Author(s)
  H.Fujimoto, H.Takuda et al.
- Journal Title
  
  Proceedings of ASME IMECE2005, November, Orlando, FL IMECE2005-80338
  
  Pages: 1-7
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Interaction Phenomena of Two Water Droplets Successively onto a Solid Surface2004
- Author(s)
  H.Fujimoto et al.
- Journal Title
  
  Proceedings of the ASME IMECE'04, Anaheim, Ca
  
  Pages: 1-6
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Entrapment of air at 45 degrees oblique collision of a water drop with a smooth solid surface at room temperature2004
- Author(s)
  H.Fujimoto, H.Takuda
- Journal Title
  
  International Journal of Heat Mass Transfer 47
  
  Pages: 3301-3305
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Collision dynamics of two droplets impinging successively onto a hot solid2004
- Author(s)
  H.Fujimoto et al.
- Journal Title
  
  ISIJ International 44-6
  
  Pages: 1049-1056
- NAID
  10013078110
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Numerical Study on the Successive Impingement of Droplets onto a substrate2004
- Author(s)
  H.Fujimoto et al.
- Journal Title
  
  Proceedings of the ASME IMECE'04, Anaheim, CA
  
  Pages: 1-8
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Collision dynamics of two droplets impinging successively onto a hot solid2004
- Author(s)
  H.Fujimoto
- Journal Title
  
  ISIJ International 44-6
  
  Pages: 1049-1056
- NAID
  10013078110
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560185
[Journal Article] Entrapment of air at 45 degrees oblique collision of a water drop with a smooth solid surface at room temperature2004
- Author(s)
  H.Fujimoto
- Journal Title
  
  International Journal of Heat and Mass Transfer 47
  
  Pages: 3301-3305
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560185
[Presentation] 移動高温固体に傾斜衝突する液滴列の沸騰流動と熱伝達特性2023
- Author(s)
  建部勝利, 藤田俊輔, 藤本仁
- Organizer
  日本鉄鋼協会第185回春季講演大会
- Data Source
  KAKENHI-PROJECT-20K04326
[Presentation] 移動高温固体に傾斜衝突する円形水噴流の沸騰流動と熱伝達特性2022
- Author(s)
  建部勝利, 藤田俊輔, 藤本仁
- Organizer
  日本鉄鋼協会第183回春季講演大会
- Data Source
  KAKENHI-PROJECT-20K04326
[Presentation] 移動高温固体へ傾斜衝突する円形水噴流の熱伝達特性2021
- Author(s)
  建部勝利、塩入悠太、藤本仁
- Organizer
  第181回日本鉄鋼協会講演大会
- Data Source
  KAKENHI-PROJECT-20K04326
[Presentation] Development of evaluation method of heat transfer characteristics for water jet cooling to moving hot solid2021
- Author(s)
  Katsutoshi TATEBE, Yuta SHIOIRI, Hitoshi FUJIMOTO, Yoshihiro SERIZAWA
- Organizer
  The 2nd Asian Conference on Thermal Sciences
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04326
[Presentation] 高温固体面とポリマー水溶液液滴の接触挙動に及ぼす衝突速度の影響2017
- Author(s)
  坂根将伍, 藤本仁, 浜孝之, 宅田裕彦
- Organizer
  日本鉄鋼協会秋季講演大会
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] AN EXPERIMENTAL STUDY OF COLLISION OF DROPS WITH A HOT SOLID BY MEANS OF THREE-DIRECTIONAL FLASH PHOTOGRAPHY2017
- Author(s)
  Hitoshi Fujimoto, Masayoshi Ashida, Shogo Sakane, Takayuki Hama, Hirohiko Takuda
- Organizer
  1st Asian Conference of Thermal Science
- Place of Presentation
  Jedu, South Korea
- Year and Date
  2017-03-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] 水溶性ポリマー液と加熱固体面の接触による皮膜形成素過程2016
- Author(s)
  坂根将伍，藤本仁，浜孝之，宅田裕彦
- Organizer
  日本鉄鋼協会秋季講演大会
- Place of Presentation
  大阪大学豊中キャンパス
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] Impact phenomena of drops of aqueous polymer solution on hot solid2015
- Author(s)
  Hitoshi Fujimoto, Kentaro Hamano, Takayuki Hama, Hirohiko Takuda
- Organizer
  10th Pacific Symposium on Flow Visualization and Image Processing
- Place of Presentation
  Naples, Italy
- Year and Date
  2015-06-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] 高温固体面に衝突する水溶性ポリマー液滴の沸騰現象と皮膜形成2015
- Author(s)
  濱野顕太郎,藤本仁,浜孝之,宅田裕彦,岡本隆彦
- Organizer
  日本鉄鋼協会秋季講演大会
- Place of Presentation
  九州大学伊都キャンパス
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-15K05825
[Presentation] 高温固体面に連続衝突する 2 液滴の変形挙動2012
- Author(s)
  藤本仁
- Organizer
  日本鉄鋼協会講演大会
- Place of Presentation
  大阪大学吹田キャンパス
- Year and Date
  2012-09-20
- Data Source
  KAKENHI-PROJECT-21560212
[Presentation] Successive Collision of Two Water Droplets with Hot Solid2012
- Author(s)
  H.Fujimoto
- Organizer
  23rd International Symposium on Transport Phenomena
- Place of Presentation
  Auckland, New Zealand
- Data Source
  KAKENHI-PROJECT-21560212
[Presentation] 高温固体面に連続衝突する二液滴の変形挙動および沸騰現象2011
- Author(s)
  藤本仁
- Organizer
  第162回日本鉄鋼協会秋季講演大会
- Place of Presentation
  大阪大学吹田キャンパス
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-21560212
[Presentation] Experimental Study on Oblique Collisions of Water Droplets with Hot Solid2010
- Author(s)
  H.Fujimoto
- Organizer
  ASME IMECE2010
- Place of Presentation
  Vancouver Canada
- Year and Date
  2010-11-14
- Data Source
  KAKENHI-PROJECT-21560212
[Presentation] 高温固体面に衝突する液滴変形挙動の力学的相似性2010
- Author(s)
  藤本仁
- Organizer
  日本鉄鋼協会
- Place of Presentation
  筑波大学
- Year and Date
  2010-03-29
- Data Source
  KAKENHI-PROJECT-21560212
[Presentation] 対向液圧角筒絞り成形における液圧特性2009
- Author(s)
  浜孝之, 北島達, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会平成21年度塑性加工春季講演会
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧角筒絞り成形における液圧特性2009
- Author(s)
  浜孝之, 北島達, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会平成21年度塑性加工春季講演会
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] Outflow characteristics of a pressure medium during square-cup sheet hydroforming2008
- Author(s)
  Takayuki Hama, Ken Kurisu, Keita Matsushima, Hitoshi Fujimoto, Hirohiko Takuda
- Organizer
  The 9th International Conference on Technology of Plasticity (ICTP 2008)
- Place of Presentation
  大韓民国・慶州
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] Outflow characteristics of a pressure medium during square-cup sheet hydroforming2008
- Author(s)
  Takayuki HAMA, Ken KURISU, Keita Matsushima, Hitoshi FUJIMOTO, Hirohiko TAKUDA
- Organizer
  The 9th International Conference on Technology of Plasticity (ICTP 2008)
- Place of Presentation
  韓国・慶州
- Year and Date
  2008-09-09
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧角筒絞り成形における圧力媒体流出特性2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会第58回塑性加工連合講演会
- Place of Presentation
  札幌市教育文化会館
- Year and Date
  2007-10-26
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧角筒絞り成形における圧力媒体流出特性2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  第58回塑性加工連合講演会(日本塑性加工学会)
- Place of Presentation
  札幌市教育文化会館
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における液圧分布の測定2007
- Author(s)
  浜孝之, 栗栖憲, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  日本鉄鋼協会第154回秋季講演大会
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-20
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における圧力分布測定法の提案と検証2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  日本塑性加工学会第58回塑性加工連合講演会
- Place of Presentation
  札幌市教育文化会館
- Year and Date
  2007-10-26
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における液圧分布の測定2007
- Author(s)
  浜孝之, 栗栖憲, 松嶋啓太, 藤本仁, 宅田裕彦
- Organizer
  第154回秋季講演大会(日本鉄鋼協会)
- Place of Presentation
  岐阜大学
- Data Source
  KAKENHI-PROJECT-19560727
[Presentation] 対向液圧成形における圧力分布測定法の提案と検証2007
- Author(s)
  浜孝之, 松嶋啓太, 栗栖憲, 藤本仁, 宅田裕彦
- Organizer
  第58回塑性加工連合講演会(日本塑性加工学会)
- Place of Presentation
  札幌市教育文化会館
- Data Source
  KAKENHI-PROJECT-19560727

1. TAKUDA Hirohiko (20135528)

# of Collaborated Projects: 12 results

# of Collaborated Products: 29 results
2. HATTA Natsuo (30026041)

# of Collaborated Projects: 8 results

# of Collaborated Products: 0 results
3. ISHII Ryuji (20026339)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
4. HAMA Takayuki (10386633)

# of Collaborated Projects: 1 results

# of Collaborated Products: 14 results
5. KOYANAKA Hideki (40248620)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. SORIMACHI Ken-ichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. TAKATANI Kouji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Fujimoto Hitoshi 藤本 仁

FUJIMOTO HITOSHI 藤本 仁

FUJIMOTO Hitoshi 藤本 仁

Research Projects

Research Products

Co-Researchers

Development of evaluation method of heat transfer characteristics in droplet impact on moving hot solidPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Transient contact behavior of aqueous polymer solution droplets with hot solid and formation process of polymer enriched-layerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Hydrodynamics and boiling phenomena of droplets impinging on hot solidPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Deformation behavior and heat transfer of droplets successively impinging onto a solid substratePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Collision Dynamics of Droplets Impinging into a Hot SolidPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ライデンフロスト点以上の温度をもつ金属表面のスプレーによる冷却能評価Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

高温金属表面の酸化被膜がスプレー冷却の冷却特性に及ぼす影響Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Fujimoto Hitoshi 藤本仁

FUJIMOTO HITOSHI 藤本仁

FUJIMOTO Hitoshi 藤本仁