SAKAMOTO Haruhisa 坂本治久

Researcher Number	40276514
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2016 – 2017: 上智大学, 理工学部, 教授 2012 – 2014: 上智大学, 理工学部, 教授 2007 – 2010: Sophia University, science and engineering, associate prof. 2004 – 2006: 上智大学, 理工学部, 講師 2002: 上智大, 理工学部, 助手 … More 2002: Sophia University, Dept.of Mechanical Engineering, Lecturer, 理工学部, 講師 2001 – 2002: 上智大学, 理工学部, 助手 1996 – 1998: 上智大学, 理工学部, 助手 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 Except Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies
Keywords	Principal Investigator 研削砥石 / 作業面状態 / 鏡面研削 / 研削加工 / レーザ変位計 / 研削仕上面粗さ / 砥石作業面 / 砥粒支持剛性 / シミュレーション / スキルフリー … More / 切れ刃密度 / 連続切れ刃間隔 / 研削抵抗 / 研削液 / 相対度数分布 / インプロセス / 粗さシミュレーション / 研削仕上面 / 砥石作業面プロファイル / 無効切れ刃 / 綾目ドレッシング / 切れ刃分布制御 / プロファイル測定 / scratch on ground surface / density of cutting edges / grain breaking / shedding / spark out / wheel working surface / dressing / mirror grinding / 砥石寿命 / 砥石摩耗 / 溶着形目づまり / 連れ回り空気流 / 超音波重畳クーラント / スクラッチ / 微小破砕 / 砥粒脱落 / スパークアウト / 砥石作業面状態 / ドレッシング / 砥粒切込みモデル / 実効的砥粒切込み深さ / 切れ刃半頂角 / インプロセス計測システム / 実効的砥粒切込深さ / 3次元仕上面粗さプロファイル / 比研削抵抗 / 実効切れ刃 / 仕上面粗さ / 実効切れ刃層深さ / プロファイル / 作業面 / 鏡面削加工 / 作業面状熊 / 清浄化 / マイクロバブル / 砥粒切れ刃密度 / インプロセス計測 / 作業面トポグラフィ / インプロセス評価 / 作業面状態変化 / 統計的評価 / オンマシン / 高速サンプリング / 高圧エア噴射 / 相互相関関数 / 再現性 / 摩耗状態 … More Except Principal Investigator 真実接触面積 / Thermal deformation mode / Swing motion / Linear motion / Evaluation method / Thermal deviation / Multi-task machine / 熱変形モード / 旋回送り運動 / 直進送り運動 / 評価法 / 熱変位 / 複合加工機 / contact condition / finite element method / wedge mechanism / stiffness / accuracy / centrifugal force / tool-chucking mechanism / high-speed spindle / 有限要素法解析 / 接触解析 / 有限要素法 / くさび機構 / 高剛性 / 高精度 / 耐遠心力性 / 工具把持メカニズム / 高速主軸 / vacuum environment / tribology / real area of contact / contact surface / contact pressure distribution / vacuum ultra-violet laser / oxygen absorption process / exoelectron / 接触剛性 / 光励起 / 機械的接触現象 / 極限環境 / 真空環境 / トライボロジー / 結合面 / 接触圧力分布 / 真空紫外レーザ光 / 酸素吸着過程 / エキソ電子 / FEM解析 / 設計指針 / 熱変形 / 結合部接触熱抵抗 / 複合工作機械 / 熱伝達 / 熱伝導 / 真空雰囲気 / 逆問題 / 温度測定 / 超音波 / 接触熱抵抗 / 結合部 Less

作業面プロファイルと砥粒支持剛性の精密計測に基づく研削面粗さシミュレーション法Principal Investigator
- Principal Investigator
  
  坂本治久
- Project Period (FY)
  2016 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Sophia University
Skill-free mirror grinding based on process simulation of precision grindingPrincipal Investigator
- Principal Investigator
  
  SAKAMOTO Haruhisa
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Sophia University
Skill-free Mirror Grinding Method Based on In-process Measurement of Grain Cutting-edge DensityPrincipal Investigator
- Principal Investigator
  
  SAKAMOTO Haruhisa
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Sophia University
Design guide of joints for improving of the thermal characteristics of multi-axis and multi-tasking machine tools
- Principal Investigator
  
  SHIMIZU Shinji
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Sophia University
Efficient and generalized method for measurement and evaluation of thermal deviation characteristics in Multi-task machine
- Principal Investigator
  
  SHIMIZU Shinji
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Sophia University
Study on Improvement Technique of Process Controllability for Mirror Grinding by Stimulating FunctionalityPrincipal Investigator
- Principal Investigator
  
  SAKAMOTO Haruhisa
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Sophia University
作業面トポグラフィに基づく研削砥石の加工性能のインプロセス評価法に関する研究Principal Investigator
- Principal Investigator
  
  坂本治久
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Sophia University
Tool Chucking Mechanism with Insensitiveness to Centrifugal Force for Ultra High-speed Spindle
- Principal Investigator
  
  SHIMIZU Shinji
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Sophia University
光学的に測定した作業面ドポグラフィによる研削砥石作業面状態のインプロセス評価法Principal Investigator
- Principal Investigator
  
  坂本治久
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Sophia University
結合部の微小接触現象を考慮した非線形接触熱抵抗の評価法
- Principal Investigator
  
  SHIMIZU Shinji
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  機械工作・生産工学
- Research Institution
  Sophia University
研削砥石の作業面状態のインプロセス計測法とその知的評価法に関する研究Principal Investigator
- Principal Investigator
  
  坂本治久
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Sophia University
Research on Tribology Evaluation of Mechanical Contact Phenomena in Extreme Environment
- Principal Investigator
  
  YOSHIDA Yoshitaro
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Chiba University

All 2017 2016 2013 2012 2011 2010 2009 2008 2006 2005 Other

All Journal Article Presentation

[Journal Article] ツルーイングに伴う残留仮想切れ刃の存在とその仕上面粗さシミュレーションに及ぼす影響2017
- Author(s)
  佐藤直人，坂本治久, 小林康記，市原浩一，原田真
- Journal Title
  
  2017年度精密工学会春季大会学術講演会講演論文集
  
  Volume: (2017) Pages: 131-132
- NAID
  130006043597
- Data Source
  KAKENHI-PROJECT-16K06020
[Journal Article] CRITICAL FEED/TOOTH VALUE PROVIDING FINEST MACHINED ROUGHNESS BY PERIPHERAL CUTTING WITH MICRO ENDMILLS2016
- Author(s)
  Y. KOBAYASHI, H. SAKAMOTO, A. ISHII AND M. ITOH
- Journal Title
  
  Materials Science Forum
  
  Volume: 874 Pages: 232-237
- DOI
  10.4028/www.scientific.net/msf.874.232
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06020
[Journal Article] Proposal of purification method of grinding coolant by dissolution of micro-bubbles2012
- Author(s)
  H.Sakamoto, H.Tsubakiyama, M.Takeishi
- Journal Title
  
  Advanced Materials Research
  
  Volume: 565 Pages: 406-411
- DOI
  10.4028/www.scientific.net/amr.565.406
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560144
[Journal Article] Analysis of Effective Cutting-edge Distribution of Grinding Wheel Based on Topography of Working and Ground Surfaces2011
- Author(s)
  H.Sakamoto, K.Nakamura, Y.Sasaki, S.Shimizu
- Journal Title
  
  Advanced Materials Research (掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 単石ダイヤモンドによるドレッシングに伴う研削砥石の切れ刃分布状態の生成過程2011
- Author(s)
  坂本治久,清水伸二
- Journal Title
  
  砥粒加工学会誌 Vol.55(掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 単石ダイヤモンドによるドレッシングに伴う研削砥石の切れ刃分布状態の生成過程2011
- Author(s)
  坂本治久, 清水伸二
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 55(査読中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Analysis of Effective Cutting-edge Distribution of Grinding Wheel Based on Topography of Working and Ground Surfaces2011
- Author(s)
  H.Sakamoto, K.Nakamura, Y.Sasaki, S.Shimizu
- Journal Title
  
  Advanced Materials Research
  
  Volume: (未確定査読中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 結合面の不均-接触状態が結合部接触熱抵抗に及ぼす影響2010
- Author(s)
  清水伸二, 野村宗平, 坂本治久, 矢生晋介
- Journal Title
  
  精密工学会誌
  
  Volume: 76巻 Pages: 653-657
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560113
[Journal Article] Generation process of cutting-edge distribution on grinding wheel with single-point diamond dressing2010
- Author(s)
  H.Sakamoto, S.Shimizu
- Journal Title
  
  Advanced Materials Research
  
  Volume: 126-128 Pages: 1001-1006
- NAID
  10029268131
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 砥粒の支持剛性を考慮した研削砥石における切れ刃密度の机上計測法2010
- Author(s)
  坂本治久, 清水伸二
- Journal Title
  
  砥粒加工学会誌(掲載決定済み, 巻号未定)
  
  Pages: 6-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 砥粒の支持剛性を考慮した研削砥石における切れ刃密度の機上計測法2010
- Author(s)
  坂本治久, 清水伸二
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 54 Pages: 431-436
- NAID
  10026793055
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 砥粒の支持剛性を考慮した研削砥石における切れ刃密度の机上計測法2010
- Author(s)
  坂本治久,清水伸二
- Journal Title
  
  砥粒加工学会誌 Vol.54, No.7
  
  Pages: 431-436
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] 結合面の不均一接触状態が結合部接触熱抵抗に及ぼす影響2010
- Author(s)
  清水伸二,野村宗平,坂本治久,矢生晋介
- Journal Title
  
  精密工学会 76巻,6号
  
  Pages: 653-657
- NAID
  130000421844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560113
[Journal Article] Generation process of cutting-edge distribution on grinding wheel with single-point diamond dressing2010
- Author(s)
  坂本治久, 清水伸二
- Journal Title
  
  Advanced Materials Research Vols.126-128
  
  Pages: 1001-1006
- NAID
  10029268131
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Estimation method of grain-height distribution based on working surface profile of grinding wheel2009
- Author(s)
  H. Sakamoto, S. Shimizu, S. Kashiwabara
- Journal Title
  
  Key Engineering Materials (校閲終了, 掲載予定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Quantification method of cutting-edge density considering grain distribution and grinding mechanism2009
- Author(s)
  H.Sakamoto, H.Tsubakiyam, S.Shimizu, S.Kashiwabara
- Journal Title
  
  Advanced Materials Research Vols.76-78
  
  Pages: 149-154
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Estimation method of grain-height distribution based on the working surface profile of grinding wheels2009
- Author(s)
  H.Sakamoto, S.Shimizu, S.Kashiwabara, H.Tsubakiyam
- Journal Title
  
  Advanced Materials Research Vols.76-78
  
  Pages: 143-148
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Quantification method of cutting-edge density considering grain distribution and grinding mechanism2009
- Author(s)
  H.Sakamoto, H.Tsubakiyama, H.Shimizu, S.Kashiwabara
- Journal Title
  
  Advanced Materials Research 76-78
  
  Pages: 149-154
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Quantification method of cutting-edge density considering grain distribution and grinding mechanism2009
- Author(s)
  H. Sakamoto, H. Tsubakiyama, H. Shimizu, S. Kashiwabara
- Journal Title
  
  Key Engineering Materials (校閲終了, 掲載予定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Estimation method of grain-height distribution based on workine surface profile of grinding wheel2009
- Author(s)
  H.Sakamoto, S.Shimizu, S.Kashiwabara
- Journal Title
  
  Advanced Materials Research 76-78
  
  Pages: 143-148
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560112
[Journal Article] Generation Process of Cutting Edge Distribution of Grinding Wheel with Dressing (in Japanese)2006
- Author(s)
  H. Sakamoto, S. Ohmori, S. Shimizu
- Journal Title
  
  Proceeding of Spring Conference of JSPE in 2006
  
  Pages: 461-462
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Mechanism of Improvement Effect of Ultrasonically Activated Coolant on Finished Surface Roughness in Cylindrical Grinding2006
- Author(s)
  H. Sakamoto, K. Kajiwara, S. Shimizu, S. Ohmori
- Journal Title
  
  JSME International Journal Vol. 49, No. 6
  
  Pages: 346-352
- NAID
  110004728847
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] 砥石作業面状態のパターン認識による定量的評価法-作業面プロファイルのピーク高さ分布変化に基づく定量化-2006
- Author(s)
  坂本治久, 清水伸二
- Journal Title
  
  精密工学会誌 72巻(校閲完了, 掲載待ち)
- NAID
  110004729630
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Mechanism of Improvement Effect of Ultrasonically Activated Coolant on Finished Surface Roughness in Cylindrical Grinding2006
- Author(s)
  H. Sakamoto, K. Kajiwara, S. Shimizu, S. Ohmori
- Journal Title
  
  JSME International Journal 49・6(校閲完了, 掲載待ち)
- NAID
  110004728847
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] 砥石作業面状態のパターン認識による定量的評価法-作業面プロファイルのピーク高さ分布変化に基づく定量化-2006
- Author(s)
  坂本治久, 清水伸二
- Journal Title
  
  精密工学会誌 72巻(校閲完了,掲載待ち)
- NAID
  110004729630
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Quantitative Evaluation Method of Working Surface Condition of Grinding Wheel Based on Pattern Recognition -Quantitative Evaluation Based on Change in Peak Height Distribution of Working Surface Profile-(in Japanese)2006
- Author(s)
  H. Sakamoto, S. Shimizu
- Journal Title
  
  Journal of JSPE Vol. 72, No. 6
  
  Pages: 761-765
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] ドレッシングに伴う研削砥石の切れ刃分布の形成過程2006
- Author(s)
  坂本治久, 大森茂俊, 清水伸二
- Journal Title
  
  2006年度精密工学会春季大会講演会講演論文集
- NAID
  130005027423
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Mechanism of Improvement Effect of Ultrasonically Activated Coolant on Finished Surface Roughness in Cylindrical Grinding2006
- Author(s)
  H.Sakamoto, K.Kajiwara, S.Shimizu, S.Ohmori
- Journal Title
  
  JSME International Journal 49・6(校閲完了,掲載待ち)
- NAID
  110004728847
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] 超音波重畳クーラントの鏡面研削への適用の可能性2005
- Author(s)
  坂本治久, 梶原邦男, 大森茂俊, 清水伸二
- Journal Title
  
  2005年度砥粒加工学会学術講演会講演論文集
  
  Pages: 155-156
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Applicability of Ultrasonically Activated Coolant to Mirror Grinding (in Japanese)2005
- Author(s)
  H. Sakamoto, K. Kajiwara, S. Ohmori, S. Shimizu
- Journal Title
  
  Proceeding of ABTEC 2005
  
  Pages: 155-156
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Mechanism of Effect of Ultrasonic Activated Coolant on Finished Surface Roughness2005
- Author(s)
  H.Sakamoto, K.Kajiwara, S.Shimizu, S.Ohmori
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 635-640
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Semi-cold-air Supply System for Environmental Impact Reduction and Its Application to Surface Grinding2005
- Author(s)
  S. Ohmori, H. Sakamoto, S. Shimizu
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 641-646
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Semi-cold-air Supply System for Environmental Impact Reduction and Its Application to Surface Grinding2005
- Author(s)
  S.Ohmori, H.Sakamoto, S.Shimizu
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 641-646
- Data Source
  KAKENHI-PROJECT-16560098
[Journal Article] Mechanism of Effect of Ultrasonic Activated Coolant on Finished Surface Roughness2005
- Author(s)
  H. Sakamoto, K. Kajiwara, S. Shimizu, S. Ohmori
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 635-640
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560098
[Presentation] ツルーイングに伴う残留仮想切れ刃の存在とその仕上面粗さシミュレーションに及ぼす影響2017
- Author(s)
  坂本治久
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶應義塾大学
- Year and Date
  2017-03-14
- Data Source
  KAKENHI-PROJECT-16K06020
[Presentation] 砥粒切れ刃分布を考慮した研削仕上面粗さのシミュレーション2013
- Author(s)
  中木将路，坂本治久，小林康記
- Organizer
  2013年度砥粒加工学会学術講演会
- Place of Presentation
  日本大学理工学部
- Data Source
  KAKENHI-PROJECT-24560144
[Presentation] 機上計測した作業面プロファイルに基づく比研削抵抗の同定2013
- Author(s)
  坂本治久，佐々木義憲，小林康記，清水伸二
- Organizer
  2013年度精密工学会春季大会学術講演会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-24560144
[Presentation] 研削砥石作業面のフラクタル特性とその研削仕上げ面粗さとの相関性2012
- Author(s)
  坂本治久，中村恭子
- Organizer
  砥粒加工学会学術講演会ABTEC2012
- Place of Presentation
  同志社大学
- Data Source
  KAKENHI-PROJECT-24560144
[Presentation] 結合面の接触状態の偏りが接触熱抵抗に及ぼすメカニズムの考察2011
- Author(s)
  清水伸二, 上芝原翔, 野村宗平, 坂本治久
- Organizer
  精密工学会
- Place of Presentation
  東洋大学白山キャンパス
- Year and Date
  2011-03-15
- Data Source
  KAKENHI-PROJECT-20560113
[Presentation] 結合面の接触状態の偏りが接触熱抵抗に及ぼすメカニズムの考察2011
- Author(s)
  清水伸二,上芝原翔,野村宗平,坂本治久
- Organizer
  精密工学会
- Place of Presentation
  東洋大学
- Year and Date
  2011-03-15
- Data Source
  KAKENHI-PROJECT-20560113
[Presentation] マイクロバブルを応用した研削液の清浄化法の提案2009
- Author(s)
  坂本治久,椿山仁士,清水伸二,武靖久
- Organizer
  2009年度精密工学会春学術講演会
- Place of Presentation
  中央大学にて発表
- Year and Date
  2009-03-12
- Data Source
  KAKENHI-PROJECT-20560112
[Presentation] マイクロバブルを応用した研削液の清浄化法の提案2009
- Author(s)
  坂本治久, 椿山仁士, 清水伸二, 武靖久
- Organizer
  2009年度精密工学会春学術講演会
- Place of Presentation
  中央大学
- Year and Date
  2009-03-12
- Data Source
  KAKENHI-PROJECT-20560112
[Presentation] The influence of real contact area distribution on thermal contact resistance of the joint2009
- Author(s)
  Shinji Shimizu, Shuhei Nomura, Haruhisa Sakamoto, Shinsuke Yagyu
- Organizer
  European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  San Sebastian, Spain
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-20560113
[Presentation] The influence of real contact distribution on thermal contact resistance of the joint2009
- Author(s)
  Shinji Shimizu, Shuhei Nomura, Haruhisa Sakamoto, Shinsuke Yagyu
- Organizer
  European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  San Sebastin, Spain
- Year and Date
  2009-06-04
- Data Source
  KAKENHI-PROJECT-20560113
[Presentation] 砥石作業面上の個々の砥粒に作用する平均研削抵抗に基づく円筒研削特性の評価2008
- Author(s)
  坂本治久, 椿山仁士, 清水伸
- Organizer
  2008年度砥粒加工学会学術講演会(ABTEC2008
- Place of Presentation
  滋賀県立大学
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-20560112
[Presentation] 砥石作業面上の個々の砥粒に作用する平均研削抵抗に基づく円筒研削特性の評価2008
- Author(s)
  坂本治久,椿山仁士,清水伸二
- Organizer
  2008年度砥粒加工学会学術講演会(ABTEC2008)
- Place of Presentation
  滋賀県立大学にて発表
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-20560112
[Presentation] 砥粒切れ刃分布に基づく研削仕上面の３次元シミュレーション手法の提案
- Author(s)
  中木将路，坂本治久*１，石川剛
- Organizer
  砥粒加工学会学術講演会ABTEC2014
- Place of Presentation
  岩手大学
- Year and Date
  2014-09-11 – 2014-09-13
- Data Source
  KAKENHI-PROJECT-24560144

1. SHIMIZU Shinji (70146801)

# of Collaborated Projects: 8 results

# of Collaborated Products: 40 results
2. YOSHIDA Yoshitaro (80174960)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. MORONUKI Nobuyuki (90166463)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. FURUKAWA Yuji (10087190)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. MORITA Noboru (30239660)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. SIMOJIMA Ken (60385490)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SAKAMOTO Haruhisa 坂本 治久

Research Projects

Research Products

Co-Researchers

作業面プロファイルと砥粒支持剛性の精密計測に基づく研削面粗さシミュレーション法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Skill-free mirror grinding based on process simulation of precision grindingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Skill-free Mirror Grinding Method Based on In-process Measurement of Grain Cutting-edge DensityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Design guide of joints for improving of the thermal characteristics of multi-axis and multi-tasking machine tools

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Efficient and generalized method for measurement and evaluation of thermal deviation characteristics in Multi-task machine

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Improvement Technique of Process Controllability for Mirror Grinding by Stimulating FunctionalityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

作業面トポグラフィに基づく研削砥石の加工性能のインプロセス評価法に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Tool Chucking Mechanism with Insensitiveness to Centrifugal Force for Ultra High-speed Spindle

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

光学的に測定した作業面ドポグラフィによる研削砥石作業面状態のインプロセス評価法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

結合部の微小接触現象を考慮した非線形接触熱抵抗の評価法

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

研削砥石の作業面状態のインプロセス計測法とその知的評価法に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on Tribology Evaluation of Mechanical Contact Phenomena in Extreme Environment

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] ツルーイングに伴う残留仮想切れ刃の存在とその仕上面粗さシミュレーションに及ぼす影響2017

Author(s)

Journal Title

NAID

SAKAMOTO Haruhisa 坂本治久