• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

NATSU Wataru  夏 恒

ORCIDConnect your ORCID iD *help
… Alternative Names

夏 恒  ナツ ワタル

NATSU WATARU  夏 恒

Less
Researcher Number 40345335
Other IDs
External Links
Affiliation (Current) 2022: 東京農工大学, 工学(系)研究科(研究院), 教授
Affiliation (based on the past Project Information) *help 2022: 東京農工大学, 工学(系)研究科(研究院), 教授
2018 – 2020: 東京農工大学, 工学(系)研究科(研究院), 教授
2012 – 2014: 東京農工大学, 工学(系)研究科(研究院), 教授
2010 – 2011: Tokyo University of Agriculture and Technology, 大学院・工学研究院, 教授
2007 – 2009: 東京農工大学, 大学院・共生科学技術研究院, 教授 … More
2007: Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Associate Professor
2006: Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Associate Professor, 大学院共生科学技術研究院, 助教授
2005: 東京農工大学, 大学院・共生科学技術研究部, 助教授
2004: 国立大学法人東京農工大学, 大学院・共生科学技術研究部, 助手
2004: National University Corporation Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Associate professor, 大学院・共生科学技術研究部, 助教授
2003: 東京農工大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Except Principal Investigator
Production engineering/Processing studies
Keywords
Principal Investigator
電解加工 / 形状創成 / 特殊加工 / 超硬合金 / 極間距離 / 電解液 / 微細軸 / 電極消耗 / 放電加工 / 生成物 … More / 極間 / 電液ジェット / 超音波 / 難削材 / 加工モデル / フラッシング / 極間制御 / 電流波形 / 制御 / 濃度 / 加工状態 / 検出精度 / 工具 / 吸引 / 極間検出 / 工具送り制御 / 流体解析 / マイクロ放電加工 / 放電回路 / サーボ制御 / 微細化限界 / 静電誘導 / 加工速度 / 表面粗さ / 高速加工 / トランジスタ回路 / コンデンサ回路 / 単結晶 / EDM / Micro EDM / Discharge circuit / Limitation of micro EDM / electrostatic induction / Removal rate / Surface roughness / 電解液ジェット / 微細加工 / マルチノズル / 重ね合せ / 加工精度 / ノズル / 重ね合わせ / ECM / Electrolyte Jet Machining / Micro Machining / Multi-nozzle / Shape Generation / Superimposition / Machining Precision / Electrode Wear / 難加工材 / 電流密度 / 不働態被膜 / 吸引工具 / 微細深穴 / 気泡 / 加工屑 / フラッシング効果 … More
Except Principal Investigator
放電加工 / 微細加工 / 電解加工 / マイクロ加工 / マスクレス / マルチノズル / ワイヤソー / 遊離砥粒 / 工具電極 / 電解液ジェット / ノズル / 電流密度分布 / 表面粗さ / 加工効率 / 形状制御 / ワイヤ放電加工 / 放電回路 / 放電エネルギー / 静電誘導 / RC放電回路 / 容量結合 / 微細放電加工 / 静電誘導給電 / 浮遊容量 / 非接触給電 / 異方性 / 熱伝導率 / 加工速度 / 単結晶シリコン / 単結晶アルミニウム / 微細化限界 / 単結晶材料 / 低消耗加工 / 形彫り放電加工 / 逆方向シミュレーション / 工具電極消耗 / 加工屑 / 放電遅れ時放電遅れ時間 / 放電遅れ時間 / 遥動加工 / 加工精度 / 加工間隙 / 曲率 / 放電点 / ボクセルモデル / 積層金型 / 射出成形金型 / ハイサイクル / 高精度 / 冷却水流路 / 拡散接合 / Laminated mold / Injection molding / High-cycle forming / High-precision / Channels for coolant / Diffusion bonding Less
  • Research Projects

    (12 results)
  • Research Products

    (101 results)
  • Co-Researchers

    (5 People)
  •  Improvement of EDM speed for micro deep holes by constructing control system with consideration of bubble flushing effectPrincipal Investigator

    • Principal Investigator
      夏 恒
    • Project Period (FY)
      2022 – 2024
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Realization of scanning ECM for difficult-to-machine materials by electrolyte suction tool with electrode for narrowing current regionPrincipal Investigator

    • Principal Investigator
      NATSU WATARU
    • Project Period (FY)
      2018 – 2020
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Research and Development of ECM Tool with Functions of Machining Area Confinement and Gap-width DetectionPrincipal Investigator

    • Principal Investigator
      NATSU Wataru
    • Project Period (FY)
      2013 – 2014
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Research on eco-friendly electrochemical micro-machining by using ultra-low concentration electrolytePrincipal Investigator

    • Principal Investigator
      NATSU Wataru
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Reverse Simulation of Sinking Electrical Discharge Machining

    • Principal Investigator
      KUNIEDA Masanori
    • Project Period (FY)
      2009 – 2011
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      The University of Tokyo
  •  Research on Shape Generation of Tungsten Carbide Alloy with ECMPrincipal Investigator

    • Principal Investigator
      NATSU Wataru
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Study on Nano Electrical Discharge Machining using ElectrostaticInduction Feeding Method

    • Principal Investigator
      KUNIEDA Masanori
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  単結晶材料の異方性を利用した微細放電加工

    • Principal Investigator
      國枝 正典
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Research on High-speed and Microfabrication of Electrolyte Jet MachiningPrincipal Investigator

    • Principal Investigator
      NATSU Wataru
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  マイクロ電解液ジェット加工の研究

    • Principal Investigator
      KUNIEDA Masanori
    • Project Period (FY)
      2004 – 2005
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Manufacturing of Next Generation Injection Molding Dies by Laminating Thin Sheets

    • Principal Investigator
      KUNIEDA Masanori
    • Project Period (FY)
      2004 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Research on sub-micron EDM with high productionPrincipal Investigator

    • Principal Investigator
      NATSU Wataru
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      National University Corporation Tokyo University of Agriculture and Technology

All 2021 2020 2019 2018 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Other

All Journal Article Presentation Patent

  • [Journal Article] Problems and Solutions in Scanning Electrochemical Machining of Titanium Alloys2020

    • Author(s)
      Hizume Saori, Natsu Wataru
    • Journal Title

      Procedia CIRP

      Volume: 95 Pages: 712-716

    • DOI

      10.1016/j.procir.2020.02.285

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Journal Article] Influence of electrolyte flow mode on characteristics of electrochemical machining with electrolyte suction tool2019

    • Author(s)
      Guixian Liu, Yongjun Zhang, Wataru Natsu
    • Journal Title

      International Journal of Machine Tools and Manufacture

      Volume: 142 Pages: 66-75

    • DOI

      10.1016/j.ijmachtools.2019.04.010

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Journal Article] Proposal and Verification of Area-limited Electroplating with Suction Tool2015

    • Author(s)
      Atsushi Sato, Wataru Natsu
    • Journal Title

      International Journal of Electrical Machining

      Volume: 20 Pages: 37-43

    • NAID

      130005395722

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Journal Article] Proposal and Verification of Electrolyte Suction Tool with Function of Gap-width Detection2014

    • Author(s)
      Katsuaki Endo, Wataru Natsu
    • Journal Title

      International Journal of Electrical Machining

      Volume: 19 Pages: 34-39

    • NAID

      130005071787

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Journal Article] 極間距離検出機能を有する電解加工用吸引工具の提案と検証2014

    • Author(s)
      遠藤克彰、夏 恒
    • Journal Title

      電気加工学会誌

      Volume: 48(119) Pages: 171-177

    • NAID

      130005071787

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Journal Article] Influence of ECM pulse conditions on WC alloy micro-pin fabrication2013

    • Author(s)
      Wataru Natsu, Daiki Kurahata
    • Journal Title

      Procedia CIRP

      Volume: Vol.6 Pages: 402-407

    • DOI

      10.1016/j.procir.2013.03.093

    • NAID

      130004660683

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Proposal of Electrolyte Suction Tool Electrode for Machining Area Confinement and Gap-width Detection2013

    • Author(s)
      Katsuaki Endo, Wataru Natsu
    • Journal Title

      Proceedings of the 13th euspen International Conference

      Volume: なし Pages: 167-171

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Journal Article] Reverse Simulation of Sinking EDM Applicable to Large Curvatures2012

    • Author(s)
      Masanori Kunieda, Yuki Kaneko, Wataru Natsu
    • Journal Title

      Precision Engineering

      Volume: 36 Pages: 238-243

    • Data Source
      KAKENHI-PROJECT-21360061
  • [Journal Article] 極低濃度電解液を用いた環境対応電解加工による超硬合金微細軸の形成2012

    • Author(s)
      澁谷直城、夏恒
    • Journal Title

      電気加工学会誌

      Volume: Vol.46, No.112 Pages: 74-80

    • NAID

      10030935529

    • URL

      https://www.jstage.jst.go.jp/browse/jseme/-char/ja/

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Reverse simulation of sinking EDM applicable to large curvatures2012

    • Author(s)
      Masanori Kunieda, Yuki Kaneko, Wataru Natsu
    • Journal Title

      Precision Engineering

      Volume: 36 Pages: 238-243

    • DOI

      10.1016/j.precisioneng.2011.10.003

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360061
  • [Journal Article] Fabrication of Tuingsten Carbide Alloy Micro-pin with Environment-Responsive ECM Using Ultra-low Concentration Electrolyte2012

    • Author(s)
      Naoki Shibuya, Wataru Natsu
    • Journal Title

      International Journal of Electrical Machining

      Volume: No.17 Pages: 32-37

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Influence of Machining Process on Gap-Width Detection in Pulse ECM2012

    • Author(s)
      Shinji Harada, Wataru Natsu
    • Journal Title

      Applied Mechanics and Materials

      Volume: Vol.220-223 Pages: 2000-2003

    • DOI

      10.4028/www.scientific.net/amm.220-223.2000

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Influence of Low-Level Voltage in Pulse ECM on Electrode Wear and Machining accuracy2012

    • Author(s)
      Katsuaki Endo, Wataru Natsu
    • Journal Title

      Applied Mechanics and Materials

      Volume: Vols.217-219 Pages: 2388-2392

    • DOI

      10.4028/www.scientific.net/amm.217-219.2388

    • NAID

      130005030993

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Study on Sensitivity of Gap-width Detection with Peak Current in Pulse ECM2012

    • Author(s)
      Shinji Harada, Wataru Natsu
    • Journal Title

      Proceedings of the 12th euspen International Conference

      Pages: 120-123

    • URL

      http://www.tuat.ac.jp/~natsulab/

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Fabrication of Tungsten Carbide Alloy Micro-pin with Environment-Responsive ECM Using Ultra-low Concentration Electrolyte2012

    • Author(s)
      Naoki Shibuya, Wataru Natsu
    • Journal Title

      International Journal of Electrical Machining

      Volume: No.17 Pages: 32-37

    • NAID

      10030935529

    • URL

      https://www.jstage.jst.go.jp/browse/

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Study on Parameter Determination for ECM Equivalent Circuit2012

    • Author(s)
      Benjamin Akimoto, Wataru Natsu
    • Journal Title

      Applied Mechanics and Materials

      Volume: Vols.220-223 Pages: 1990-1994

    • DOI

      10.4028/www.scientific.net/amm.220-223.1990

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Electrochemical Machining of Tungsten Carbide Alloy Micro-pin with NaNO3 Solution2012

    • Author(s)
      Naoki Shibuya, Yukihiro Ito, Wataru Natsu
    • Journal Title

      International Journal of Precision Engineering and Manufacturing

      Volume: Vol.13, No.11 Pages: 2075-2078

    • DOI

      10.1007/s12541-012-0273-2

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Approach to Detect and Control Gap-width with Peak Current in Pulse ECM2012

    • Author(s)
      Wataru Natsu, Atsushi Terada
    • Journal Title

      Advanced Materials Research

      Volume: Vol.482-484 Pages: 1973-1978

    • DOI

      10.4028/www.scientific.net/amr.482-484.1973

    • NAID

      10030186569

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Micro Pin Fabrication by ECM with Ultra-low Concentration Electrolyte2011

    • Author(s)
      Naoki Shibuya, Wataru Natsu
    • Journal Title

      Proceedings of the 11th euspen International Conference

      Pages: 297-300

    • URL

      http://www.tuat.ac.jp/~natsulab/

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Journal Article] Development of Gap-width Controlling System for Micro-ECM2010

    • Author(s)
      A.Terada, W.Natsu
    • Journal Title

      Proceedings of the 16^<th> International Symposium on Eelectromachining

      Pages: 357-360

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Journal Article] Analysis of ECM Phenomena with Equivalent Circuit for Electrolysis2010

    • Author(s)
      W.Natsu T.Kunimi
    • Journal Title

      International Journal of Electrical Machining No.15

      Pages: 45-50

    • NAID

      10027975310

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Journal Article] Analysis of ECM Phenomena with Equivalent Circuit for Electrolysis2010

    • Author(s)
      W Natsu, K.Kunimi
    • Journal Title

      International Journal of Electrical Machining No.15

      Pages: 45-50

    • NAID

      10027975310

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Journal Article] Research on Generation of Three-Dimensional Surface with Micro Electrolyte Jet Machining2008

    • Author(s)
      Wataru Natsu, Satoshi Ooshiro, Masanori Kunieda
    • Journal Title

      CIRP Journal of Manufacturing Science and Technology (採択済み)

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Study on Micro Electrolyte Jet Machining2007

    • Author(s)
      Satoshi Ooshiro, Masanori. Kunieda, Wataru Natsu
    • Journal Title

      Proc. of ISEM-XV

      Pages: 387-392

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Study on Micro Electrolyte Jet Machining2007

    • Author(s)
      Satoshi, Ooshiro, Masanori, Kunieda, Wataru, Natsu
    • Journal Title

      Proceedings of ISEM-XV

      Pages: 387-392

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Generating Complicated Surface with Electrolyte Jet Machining2007

    • Author(s)
      Wataru Natsu, Tomone Ikeda, Masanori kunieda
    • Journal Title

      Precision Engineering 31(1)

      Pages: 33-39

    • NAID

      10018659589

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Generating Complicated Surface with Electrolyte Jet Machining2007

    • Author(s)
      Wataru, Natsu, Tomone, Ikeda, Masanori, Kunieda
    • Journal Title

      Precision Engineering Vol. 31(1)

      Pages: 33-39

    • NAID

      10018659589

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Study on Micro Electrolyte Jet Machining2007

    • Author(s)
      Satoshi Ooshiro, Masanori Kunieda, Wataru Natsu
    • Journal Title

      Proceedings of ISEM-XV

      Pages: 387-392

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Study on Characteristics of High Speed Electrolyte Jet Machining2006

    • Author(s)
      Wataru, Natsu, Tomone, Ikeda, Masanori, Kunieda
    • Journal Title

      Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing

      Pages: 333-338

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Electrolyte Jet Machining Using Multiple Nozzles2006

    • Author(s)
      T.Ikeda, W.Natsu, M.Kunieda
    • Journal Title

      International Journal of Electrical Machining No.11

      Pages: 25-32

    • NAID

      10017663996

    • Data Source
      KAKENHI-PROJECT-16656050
  • [Journal Article] Study on Characteristics of High Speed Electrolyte Jet Machining2006

    • Author(s)
      Wataru Natsu, Tomone Ikeda, Masanori kunieda
    • Journal Title

      Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing

      Pages: 333-338

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Journal Article] Machining complicated patterns with electrolyte jet machining2005

    • Author(s)
      Wataru Natsu
    • Journal Title

      euspen's 5th International Conference (2005年5月発表予定)

    • Data Source
      KAKENHI-PROJECT-16656050
  • [Journal Article] 電解液ジェット加工による形状創成2004

    • Author(s)
      夏 恒
    • Journal Title

      電気加工学会全国大会(2004)講演論文集

      Pages: 25-28

    • NAID

      10015473108

    • Data Source
      KAKENHI-PROJECT-16656050
  • [Journal Article] Research on Energy Distribution into Two Electrodes in EDM Process2004

    • Author(s)
      Wataru Natsu
    • Journal Title

      Proceedings of the 6th International Conference on Frontiers of Design and Manufacturing

      Pages: 573-575

    • Data Source
      KAKENHI-PROJECT-15560091
  • [Journal Article] Research on Generation of Three-Dimensional Surface with Micro Electrolyte Jet Machining

    • Author(s)
      Wataru, Natsu, Satoshi, Ooshiro, Masanori, Kunieda
    • Journal Title

      CIRP Journal of Manufacturing Science and Technology (to be published)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Patent] 電解加工装置、電解加工方法および工具電極の製造方法2013

    • Inventor(s)
      夏 恒
    • Industrial Property Rights Holder
      国立大学東京農工大学
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2013-174952
    • Filing Date
      2013-08-26
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] Characteristics of electrochemical machining by using electrolyte suction tool with auxiliary anode2021

    • Author(s)
      Takafumi Tabata, Shuhei Kodama, Wataru Natsu, Guanxian Liu
    • Organizer
      euspen's 21st International Conference & Exhibition
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 走査電解加工における補助陽極効果の検証2020

    • Author(s)
      田畑嵩奎、夏 恒、小玉脩平
    • Organizer
      電気加工学会全国大会(2020)
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] チタン合金の電解加工において不働態被膜生成に与える電流密度と時間の影響2020

    • Author(s)
      日極さおり、夏 恒
    • Organizer
      2020年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] チタン合金の電解加工における被膜生成に関する研究2019

    • Author(s)
      日極さおり、夏 恒、後藤昭弘
    • Organizer
      2019年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] チタン合金における不働態被膜の生成が電解加工特性に与える影響2019

    • Author(s)
      日極さおり、夏 恒
    • Organizer
      2019年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] チタン合金の電解加工における吸引工具の補助陽極の効果2019

    • Author(s)
      田畑嵩奎、夏 恒
    • Organizer
      電気加工学会全国大会(2019)
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 補助陽極による電流域を制限する電解液吸引工具を用いた電解加工の特性2019

    • Author(s)
      田畑嵩奎、夏 恒
    • Organizer
      2019年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 電解作用により生成された不働態被膜が電解加工に与える影響について2019

    • Author(s)
      日極さおり、夏 恒
    • Organizer
      電気加工学会全国大会(2019)
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 電解加工用吸引工具における電解液流れ方向の影響2019

    • Author(s)
      杉山智映、夏 恒
    • Organizer
      2019年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] Research on machining characteristics and tool wear in ECM with electrolyte suction tool with auxiliary anode2019

    • Author(s)
      Takafumi Tabata, Wataru Natsu, Guanxian Liu
    • Organizer
      3rd World Congress on Micro and Nano Manufacturing
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 補助陽極による電流域を制限する電解液吸引工具を用いた電解加工の特性2018

    • Author(s)
      田畑嵩奎、劉桂賢、夏 恒
    • Organizer
      2018年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] Influence of suction pressure and flow direction on ECM characteristics with suction tool2018

    • Author(s)
      Guixian Liu, Wataru Natsu
    • Organizer
      17th International Conference on Precision Engineering
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] Characteristics Investigation of ECM with Electrolyte Suction Tool with Built-in Auxiliary Anode for Narrowing Current Area2018

    • Author(s)
      Guixian Liu, Saori HIZUME, Wataru Natsu
    • Organizer
      The 21st International Symposium on Advances in Abrasive Technology
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 電解液吸引工具を用いた電解加工における補助陽極の効果について2018

    • Author(s)
      田畑 嵩奎、夏 恒、劉桂賢
    • Organizer
      電気加工学会全国大会(2018)
    • Data Source
      KAKENHI-PROJECT-18H01348
  • [Presentation] 電流波形によるパルス電解加工状態検出の可能性2014

    • Author(s)
      原田慎治、夏 恒
    • Organizer
      2014年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 電流波形によるパルス電解加工状態検出の可能性2014

    • Author(s)
      原田慎治、夏 恒
    • Organizer
      2014年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京都東京大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 電解加工による機械摺動面の油だまりの形成2014

    • Author(s)
      遠藤克彰、野口 稜、夏 恒
    • Organizer
      2014年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京都東京大学
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] 遺伝的アルゴリズムを用いた電解加工等価回路のパラメータ同定2014

    • Author(s)
      秋元ベニヤミン、原田慎治、夏 恒
    • Organizer
      2014年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京都東京大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 遺伝的アルゴリズムを用いた電解加工等価回路のパラメータ同定2014

    • Author(s)
      秋元ベニヤミン、原田慎治、夏 恒
    • Organizer
      2014年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 単極性パルスと両極性パルスによる超硬合金の電解加工特性の比較と考察2013

    • Author(s)
      黒木壮介、夏 恒
    • Organizer
      電気加工学会全国大会
    • Place of Presentation
      名古屋市愛知県産業労働センター
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] パルス電解加工における極間距離と加工状態の検出に関する研究2013

    • Author(s)
      原田慎治、夏 恒
    • Organizer
      2013年度精密工学会春季大会
    • Place of Presentation
      東京工業大学大岡山キャンパス
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 日本特殊加工分野の最新研究動向2013

    • Author(s)
      夏恒
    • Organizer
      中国第15回全国特殊加工学術会議
    • Place of Presentation
      中国南京市南京航空航天大学
    • Invited
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] パルス電解加工における極間距離と加工状態の検出に関する研究2013

    • Author(s)
      原田慎治、夏恒
    • Organizer
      2013年度精密工学会春季大会
    • Place of Presentation
      東京工業大学大岡山キャンパス(東京都目黒区)
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] Influence of ECM pulse conditions on WC alloy micro-pin fabrication2013

    • Author(s)
      Wataru Natsu, Daiki Kurahata
    • Organizer
      The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM)
    • Place of Presentation
      Leuven, Belgium
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 単極性パルスと両極性パルスによる超硬合金の電解加工特性の比較と考察2013

    • Author(s)
      黒木壮介、夏 恒
    • Organizer
      電気加工学会全国大会(2013)
    • Place of Presentation
      名古屋市愛知県産業労働センター
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 日本特殊加工分野の最新研究動向2013

    • Author(s)
      夏 恒
    • Organizer
      中国第15回全国特殊加工学術会議
    • Place of Presentation
      中国南京市南京航空航天大学
    • Invited
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] 加工領域限定用工具による環境対応電解加工の実現2013

    • Author(s)
      遠藤克彰、夏 恒
    • Organizer
      電気加工学会全国大会(2013)
    • Place of Presentation
      名古屋愛知県産業労働センター
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] 電解加工パルス条件が超硬合金微細軸形成に与える影響2012

    • Author(s)
      倉畑大輝、夏恒
    • Organizer
      2012年度精密工学会秋季大会
    • Place of Presentation
      九州工業大学戸畑キャンパス(北九州市)
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] パルス電解加工のローレベル電圧が工具消耗と加工精度に及ぼす影響2012

    • Author(s)
      遠藤克彰、夏 恒
    • Organizer
      2012年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京都八王子市首都大学東京
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 電解加工パルス条件が超硬合金微細軸形成に与える影響2012

    • Author(s)
      倉畑大輝、夏 恒
    • Organizer
      2012年度精密工学会秋季大会
    • Place of Presentation
      九州工業大学戸畑キャンパス
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] Study on Sensitivity of Gap-width Detection with Peak Current in Pulse ECM2012

    • Author(s)
      Shinji Harada, Wataru Natsu
    • Organizer
      The 12th euspen International Conference
    • Place of Presentation
      Stockholm, Sweden
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 工具電極の超音波振動による電解加工特性め向上2011

    • Author(s)
      中山尚志・夏恒
    • Organizer
      2011年度精密工学会春季大会学術講演会
    • Place of Presentation
      精密工学会WEBサイト
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] Improvement of ECM Machining Characteristics by Applying Ultrasonic Vibration2011

    • Author(s)
      Wataru Natsu, Hisashi Nakayama, Zuyuan Yu
    • Organizer
      International Symposium on Green Manufacturing and Applications
    • Place of Presentation
      韓国ソウル市ソウル大学
    • Year and Date
      2011-10-07
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] Research on ECM Conditions for Micro-pin Fabrication of Tungsten Carbide Alloy2011

    • Author(s)
      Naoki Shibuya, Yukihiro Ito, Wataru Natsu
    • Organizer
      Proceedings of International Symposium on Green Manufacturing and Applications
    • Place of Presentation
      韓国ソウル大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 極低濃度電解液による微細軸形成条件の検討2011

    • Author(s)
      澁谷直城・夏恒
    • Organizer
      2011年度精密工学会春季大会学術講演会
    • Place of Presentation
      精密工学会WEBサイト
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] ピーク電流を用いたパルス電解加工の極間距離検出感度に関する研究2011

    • Author(s)
      原田慎治、夏 恒
    • Organizer
      電気加工学会全国大会
    • Place of Presentation
      茨城県つくば市研究交流センター
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 超硬合金の微細軸形成における電解加工条件の調査2011

    • Author(s)
      澁谷直城、夏 恒
    • Organizer
      2011年度精密工学会秋季大会学術講演会
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] Improvement of ECM Machining Characteristics by Applying Ultrasonic Vibration2011

    • Author(s)
      Wataru Natsu, Hisashi Nakayama, Zuyuan Yu
    • Organizer
      Proceedings of International Symposium on Green Manufacturing and Applications
    • Place of Presentation
      韓国ソウル大学
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] ピーク電流を用いたパルス電解加工の極間距離検出感度に関する研究2011

    • Author(s)
      原田慎治、夏恒
    • Organizer
      電気加工学会全国大会(2011)
    • Place of Presentation
      茨城県つくば市研究交流センター
    • Year and Date
      2011-11-24
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 電解加工による超硬合金の微細軸形成過程の観察2011

    • Author(s)
      澁谷直城、伊藤幸弘、夏 恒
    • Organizer
      電気加工学会全国大会講演会
    • Place of Presentation
      茨城県つくば市研究交流センター
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 工具電極の超音波振動による電解加工特性の向上2011

    • Author(s)
      中山尚志, 夏恒
    • Organizer
      2011年度精密工学会春季大会
    • Place of Presentation
      精密工学会WEBサイト
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 極低濃度電解液による微細軸形成条件の検討2011

    • Author(s)
      澁谷直城, 夏恒
    • Organizer
      2011年度精密工学会春季大会
    • Place of Presentation
      精密工学会WEBサイト
    • Year and Date
      2011-03-01
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 電解加工による超硬合金の微細軸形成過程の観察2011

    • Author(s)
      澁谷直城、伊藤幸弘、夏恒
    • Organizer
      電気加工学会全国大会(2011)
    • Place of Presentation
      茨城県つくば市研究交流センター
    • Year and Date
      2011-11-24
    • Data Source
      KAKENHI-PROJECT-23360064
  • [Presentation] 電解等価回路を用いた加工特性向上の試み2010

    • Author(s)
      阿部亮史, 夏恒
    • Organizer
      2010年度精密工学会春季大会学術講演会
    • Place of Presentation
      埼玉大学(埼玉県)
    • Year and Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 工具電極の運動制御による生成物の排出と電解加工特性の向上2010

    • Author(s)
      寺田篤, 夏恒
    • Organizer
      2010年度精密工学会秋季大会
    • Place of Presentation
      名古屋大学
    • Year and Date
      2010-09-28
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] Development of Gap-width Controlling System for Micro-ECM2010

    • Author(s)
      寺田篤, 夏恒
    • Organizer
      the 16th International Symposium on Electromachining
    • Place of Presentation
      中国上海
    • Year and Date
      2010-04-21
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 形彫り放電加工における逆方向シミュレーションの実験的検証2010

    • Author(s)
      金子勇基、夏恒、国枝正典
    • Organizer
      電気加工学会全国大会(2010)
    • Place of Presentation
      浜松静岡大学
    • Year and Date
      2010-11-25
    • Data Source
      KAKENHI-PROJECT-21360061
  • [Presentation] 工具電極の運動制御による生成物の排出と電解加工特性の向上2010

    • Author(s)
      寺田篤・夏恒
    • Organizer
      2010年度精密工学会秋季大会講演会
    • Place of Presentation
      アクトシティ浜松研修交流センター(静岡県)
    • Year and Date
      2010-11-25
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 等価回路の解析による電解加工特性の理解2010

    • Author(s)
      夏恒, 国見喬嗣, 阿部亮史
    • Organizer
      第199同電気加工研究会
    • Place of Presentation
      工学院大学
    • Year and Date
      2010-06-04
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 電解等価回路を用いた加工特性向上の試み2010

    • Author(s)
      阿部亮史, 夏恒
    • Organizer
      2010年度精密工学会春季大会
    • Place of Presentation
      埼玉大学
    • Year and Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 工具電極の運動制御による電解加工特性の向上2009

    • Author(s)
      寺田篤, 夏恒
    • Organizer
      電気加工学会全国大会(2009)
    • Place of Presentation
      メルパルク京都
    • Year and Date
      2009-11-26
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] マイクロ電解加工機の極間距離の制御に関する研究2009

    • Author(s)
      寺田篤, 國見喬嗣, 夏恒
    • Organizer
      2009年度精密工学会春季大会
    • Place of Presentation
      中央大学
    • Year and Date
      2009-03-11
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] 工具電極の運動制御による電解加工特性の向上2009

    • Author(s)
      寺田篤, 夏恒
    • Organizer
      電気加工学会全国大会(2009)
    • Place of Presentation
      京都メルパルク京都
    • Year and Date
      2009-11-26
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] マイクロ電解加工機の極間距離の制御に関する研究2009

    • Author(s)
      寺田篤, 國見喬嗣, 夏恒
    • Organizer
      2008年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京
    • Year and Date
      2009-03-11
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] マイクロ電解加工における極間現象の解明の試み2008

    • Author(s)
      國見喬嗣, 寺田篤, 夏恒
    • Organizer
      電気加工学会全国大会(2008)
    • Place of Presentation
      東京
    • Year and Date
      2008-11-28
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] マイクロ電解加工における極間現象の解明の試み2008

    • Author(s)
      國見喬嗣, 寺田篤, 夏恒
    • Organizer
      電気加⊥学会全国大会(2008)
    • Place of Presentation
      CIC東京
    • Year and Date
      2008-11-28
    • Data Source
      KAKENHI-PROJECT-20560099
  • [Presentation] Machining Spherical Surface Using Electrolyte Jet Machining2007

    • Author(s)
      Satoshi, Ooshiro, Wataru, Natsu, Masanori, Kunieda
    • Organizer
      JSPE Spring Research Meeting
    • Place of Presentation
      in Shibaura Institute of Technology
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Presentation] 電解液ジェット加工による球面加工2007

    • Author(s)
      大代智史、夏 恒、国枝正典
    • Organizer
      精密工学会春季大会学術講演会
    • Place of Presentation
      芝浦工業大学
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Presentation] 微細ノズルを用いた電解液ジェット加工2006

    • Author(s)
      大代智史、国枝正典、夏 恒
    • Organizer
      精密工学会秋季大会学術講演会
    • Place of Presentation
      宇都宮大学
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Presentation] Electrolyte Jet Machining Using Micro-Nozzles2006

    • Author(s)
      Satoshi, Ooshiro, Masanori, Kunieda, Wataru, Natsu
    • Organizer
      JSPE Autumn Research Meeting
    • Place of Presentation
      in Utsunomiya University
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560098
  • [Presentation] 形彫り放電加工における逆方向シミュレーションの実験的検証

    • Author(s)
      金子勇基,夏恒,国枝正典
    • Organizer
      電気加工学会全国大会
    • Data Source
      KAKENHI-PROJECT-21360061
  • [Presentation] Application of Electrolyte Suction Tool in Removal and Addition Processing

    • Author(s)
      夏 恒
    • Organizer
      2nd Symposium for International Cooperation on Micro and Precision Electrical Machining
    • Place of Presentation
      上海交通大学(中国)
    • Year and Date
      2015-01-10 – 2015-01-12
    • Invited
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] 吸引工具を用いた深穴の電解加工について

    • Author(s)
      名古屋 寛、夏 恒
    • Organizer
      2014年度精密工学会秋季大会学術講演会
    • Place of Presentation
      鳥取大学
    • Year and Date
      2014-09-16 – 2014-09-18
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] 吸引工具を用いたNaCl溶液の電解加工特性

    • Author(s)
      名古屋 寛、夏 恒
    • Organizer
      2015年度精密工学会春季大会学術講演会
    • Place of Presentation
      東洋大学
    • Year and Date
      2015-03-17 – 2015-03-19
    • Data Source
      KAKENHI-PROJECT-25630021
  • [Presentation] 電極材料が吸引式工具を用いた領域限定電解めっき膜形成に及ぼす影響

    • Author(s)
      佐藤 敦、夏 恒
    • Organizer
      電気加工学会全国大会(2014)
    • Place of Presentation
      新潟大学
    • Year and Date
      2014-12-04 – 2014-12-05
    • Data Source
      KAKENHI-PROJECT-25630021
  • 1.  KUNIEDA Masanori (90178012)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 18 results
  • 2.  花崎 逸雄 (10446734)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 3.  小玉 脩平 (10867237)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 4.  YANG Xiaodong
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 5.  SANO Sadao
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi