OHNO Katuhisa 大野勝久

… Alternative Names

大野勝久オオノカツヒサ

OHNO KATUHISA 大野勝久

Less

Researcher Number	50026118
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2013: 愛知工業大学, 経営学部, 教授 2009 – 2010: Aichi Institute of Technology, 経営学部, 教授 2007 – 2008: Aichi Institute of Technology, Faculty of Management and Information Science, Professor 2006: 愛知工業大学, 経営情報学部, 教授 2004 – 2005: 愛知工業大学, 経営情報科学部, 教授 … More 2003: Nagoya Institute of Technology, Faculty of Engineering, Professor, 工学研究科, 教授 1995 – 2002: 名古屋工業大学, 工学部, 教授 1990 – 1993: 名古屋工業大学, 工学部, 教授 1991: 名古屋工業大学, 工学部(オペレーションズ・リサーチ), 教授 1987 – 1988: 名古屋工業大学, 工学部, 教授 Less
Review Section/Research Field	Principal Investigator 社会システム工学 / Social systems engineering/Safety system / Social systems engineering/Safety system / 社会システム工学 Except Principal Investigator 社会システム工学 / Informatics / 機械工作
Keywords	Principal Investigator ニューロDPアルゴリズム / ジャストインタイム生産システム / MRP / ジャストインタイム生産方式 / Neuro DP algorithm / JIT生産システム / Just-In-Time production system / かんばん方式の最適性 / mixed-model assembly line / 事前需要情報 … More / 指数平滑法 / Cell production system / 配送計画問題 / 最適化アルゴリズム / 自律分散型システム / 自律分散型生産・物流システム / 環境 / 次世代生産・物流システム / 生産システム・シミュレータ / システム・シミュレータ / OPT / 最適かんばん枚数 / アルゴリズム / かんばん方式 / real survey / U-shaped line / pull system / optimization / creation of SCM / Just Tn Time production system / RFID / 実態調査 / U字ライン / 混合品種組立ライン / プル方式 / 最適化 / SCMの構築 / vehicle routine problem / Optimization algorithm / IT-based evolution / 最適統合生産計画 / ニューロダイナミックプログラミング / アウトソーシングの実態調査 / U字ラインへの多能工最適割当 / 最適統合生産 / 配送計画問題計画 / セル生産方式 / 混合品種組み立てライン / IT活用による進化 / Autonomous decentralized system / Optimizing algorithm / Optimal production and distribution systems / 最適物流・生産システム / 3次元積み降ろし問題 / 最適搬送計画 / U字生産ライン / セル生産システム / 最適生産・物流システム / System Optimization / Decentralized autonomous system / System simulator / Next generation production and distribution systems / 一人生産方式 / U字型生産ライン / システム最適化 / 先行需要情報 / 一般化かんばん方式 / SCMの最適化 / 確率最適制御 / マルコフ決定過程 / シミュレーション / 近似DP / 強化学習 / かんばん方式の最適設定 / サプライチェーンの最適制御 / ISO14000 / 自律分散型生産システム / 安定条件 / 生産指示かんばん / 外注かんばん / 最適引き取り周期 / 社会的費用 / 拡散 / 大気排出物 / 負効果 / 自然景観 / 富士山 / 高位工場計画 / 美的社会 … More Except Principal Investigator probability maximization / rank minimization / multiple choice / dynamic programming / relative rank / optimal stopping / best choice problem / secretary problem / 待ち行列ネットワーク / Queueing Theory / Traffic Evaluation / Computer Network / Communication Network / Information Network / トラフィック評価 / 通信網 / コンピュータ・ネットワーク / 待ち行列理論 / トラフイック評価 / 情報ネットワーク / rdativl rank / optiomal stopping / optiomal selection / multiple choril / random walk / ballot problem / urn problem / optimal selection / Flow control / ATM networks / Large deviation theory / Long-range dependence / Input processes with correlations / Queueing networks / Performance models / Communication networks / フローコントロール / ATMネットワーク / large deviation theory / long-range dependence / 相関のある入力過程 / 性能評価モデル / 情報通信ネットワーク / ナノスケ-ル / 分子動力学 / 分子力学 / 工具摩耗 / 粒子系シミュレ-ション / 計算機実験 / 超精密切削 / 歴史的誤謬 / 空中排出物による視程障害 / 煙突都市富士市 / 富士山南面地景観破壊 / 産業開発による景観破壊 / 美的社会 Less

不確実環境下における多品種サプライチェーンの最適制御に関する研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Aichi Institute of Technology
Studies on optimization of SCM by the generalized kanban system and neuro-dynamic programmingPrincipal Investigator
- Principal Investigator
  
  OHNO Katuhisa
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Aichi Institute of Technology
Study on a creation of supply chain management based on the JIT principlePrincipal Investigator
- Principal Investigator
  
  OHNO Katsuhisa
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Aichi Institute of Technology
Study on IT-based Evolution of JIT production systemsPrincipal Investigator
- Principal Investigator
  
  OHNO Katsuhisa
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Aichi Institute of Technology
Study of construction of optimal production and distributio systems based on JIT philosophyPrincipal Investigator
- Principal Investigator
  
  OHNO Katsuhisa
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
A study on the best choice problem based on the ranks of observations
- Principal Investigator
  
  TAMAKI Mitsuhi
- Project Period (FY)
  1998 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Aichi University
環境を重視した次世代生産・物流システムの構築に関する研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  1997
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Nagoya Institute of Technology
Development and evaluation of next generation production and distribution systemsPrincipal Investigator
- Principal Investigator
  
  OHNO Katsuhisa
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
次世代生産・物流システムの開発に関する研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
Research on New Methods for Performance Evaluation of Communication Networks
- Principal Investigator
  
  TAKAHASHI Yukio
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  社会システム工学
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
次世代生産・物流システムの構築と評価に関する研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
環境適応を重視したジャストインタイム生産経営方式に関する研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
環境適応を重視したジャストインタイム生産経営方式に関する研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  社会システム工学
- Research Institution
  Nagoya Institute of Technology
美的社会を志向した高位工場計画の研究
- Principal Investigator
  
  熊谷智徳
- Project Period (FY)
  1991
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  The Open University of Japan
量子/分子力学にもとづくダイヤモンド工具摩耗プロセスの直接観察
- Principal Investigator
  
  稲村豊四郎
- Project Period (FY)
  1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Nagoya Institute of Technology
美的社会を志向した高位工場計画の研究Principal Investigator
- Principal Investigator
  
  大野勝久
- Project Period (FY)
  1990
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Nagoya Institute of Technology
FUNDAMENTAL STUDIES ON TRAFFIC PROBLEMS IN INFORMATION NETWORK
- Principal Investigator
  
  MORIMURA HIDENORI
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Informatics
- Research Institution
  TOKYO INSTITUTE OF TCHNOLOGY

All 2011 2010 2009 2008 2007 2006 2005 2004

All Journal Article Presentation Book

[Book] Excelによる生産管理-需要予測,在庫管理からJITまで-2011
- Author(s)
  大野勝久
- Total Pages
  196
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-20510148
[Book] Excelによる生産管理-需要予測、在庫管理からJITまで-2011
- Author(s)
  大野勝久
- Total Pages
  196
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-20510148
[Book] 進化技術ハンドブック第I巻基礎編2010
- Author(s)
  片井修,玄光男,大野勝久, 他編集
- Total Pages
  256
- Publisher
  近代科学社
- Data Source
  KAKENHI-PROJECT-20510148
[Book] 進化技術ハンドブック第I巻基礎編2010
- Author(s)
  片井修, 玄光男, 大野勝久, 他編集
- Total Pages
  240
- Publisher
  近代科学社
- Data Source
  KAKENHI-PROJECT-20510148
[Book] サプライチェーン・ハンドブック2008
- Author(s)
  黒田充, 大野勝久監訳
- Total Pages
  719
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-20510148
[Book] サプライチェーンハンドブック2008
- Author(s)
  黒田充,大野勝久監訳
- Total Pages
  719
- Publisher
  朝倉書店
- Data Source
  KAKENHI-PROJECT-20510148
[Book] Excelによる経営科学2005
- Author(s)
  大野勝久, 玉置光司, 石垣智徳, 伊藤崇博
- Total Pages
  201
- Publisher
  コロナ社
- Data Source
  KAKENHI-PROJECT-16510112
[Book] ジャストインタイム生産システム2004
- Author(s)
  ジャストインタイム生産システム研究会編, 大野勝久, 田村隆善他
- Total Pages
  389
- Publisher
  日刊工業新聞社
- Data Source
  KAKENHI-PROJECT-16510112
[Book] ジャストインタイム生産システム2004
- Author(s)
  ジャストインタイム生産システム研究会編, 大野, 田村他
- Total Pages
  389
- Publisher
  日刊工業新聞社
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 最適かんばん方式とニューロDPによるSCMの最適化に関する研究不確実性下における意思決定問題2011
- Author(s)
  大野勝久,坊敏隆,荒川雅裕
- Journal Title
  
  数理解析研究所考究録 Vol.1734
  
  Pages: 148-155
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] The Performance Evaluation of a Multi-stage JIT Production System with Stochastic Demand and Production Capacities2011
- Author(s)
  M.Iwase, K.Ohno
- Journal Title
  
  European Journal of Operational Research (掲載予定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Optimal production sequencing problem to minimize line stoppage time in a mixed-model assembly line2011
- Author(s)
  T.Tamura, T.Okumura, T.S.Dhakar, K.Ohno
- Journal Title
  
  International Journal of Production Research
  
  Volume: 49 Pages: 4299-4315
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] The Optimal Control of Just-in-time-based Production and Distribution Systems and Performance Comparisons with Optimized Pull Systems2011
- Author(s)
  大野勝久
- Journal Title
  
  European Journal of Operational Research Vol.213
  
  Pages: 124-133
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] 最適かんばん方式とニューロDPによるSCMの最適化に関する研究2011
- Author(s)
  大野勝久, 坊敏隆, 荒川雅裕
- Journal Title
  
  数理解析研究所考究録
  
  Volume: 1734 Pages: 148-155
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] The Optimal Control of Just-in-time-based Production and Distribution Systems and Performance Comparisons with Optimized Pull Systems2011
- Author(s)
  K.Ohno
- Journal Title
  
  European Journal of Operational Research
  
  Volume: 213 Pages: 124-133
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Optimal production sequencing problem to minimize line stoppage time in a mixed-model assembly line2011
- Author(s)
  T.Tamura, T.Okumura, T.S.Dhakar, K.Ohno
- Journal Title
  
  International Journal of Production Research (掲載予定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] The Performance Evaluation of a Multi-stage JIT Production System with Stochastic Demand and Proauction Capacities2011
- Author(s)
  M.Iwase, K.Ohno
- Journal Title
  
  European Journal of Operational Research
  
  Volume: 214 Pages: 216-222
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Meta Heuristics to Minimize Line Stoppage Time in Mixed-Model Sequencing Problem2010
- Author(s)
  T.Tamura, T.Okumura, T.S.Dhakar, K.Ohno
- Journal Title
  
  Proceedings of POMS 21th Annual conference
  
  Pages: 1-32
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Formulation of an Optimal Production Sequencing Problem in a Complex Free flow Assembly Line2009
- Author(s)
  T. Tamura, M. Yamazaki, T. S. Dhakar, K. Ohno
- Journal Title
  
  日本経営工学会論文誌 59
  
  Pages: 205-213
- NAID
  110007521755
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Computational efficiencies of goal chasing, SA, TS and GA algorithms to optimize production sequence in a free flow assembly line2009
- Author(s)
  T.Tamura, S.Nishikawa, T.S.Dhakar, K.Ohno
- Journal Title
  
  Proceedings of International Conference of APIEMS
  
  Pages: 2145-2156
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Optimal Production Sequencing Problem to Minimize Line Stoppage Time in a Mixed-Model Assembly Line2009
- Author(s)
  T.Tamura, T.Okumura, T.S.Dhakar, K.Ohno
- Journal Title
  
  Proc.20th International Conference on Production Research
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Open Problems in the Field of Queues2008
- Author(s)
  H. Takagi, K. Ohno, M. Miyazawa, F. Machihara, I. Kino
- Journal Title
  
  Communications of the Operations Research Society of Japan 53-1
  
  Pages: 15-20
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Effectiveness of an Exponentially Smoothed Ordering Policy as Compared with Kanban System2008
- Author(s)
  T. Tamura, T. S. Dhakar, and K. Ohno
- Journal Title
  
  Journal of the Korean Institute of Industrial Engineers 34
  
  Pages: 1-12
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Effectiveness of an Exponentially Smoothed Ordering Policy as Compared with Kanban System2008
- Author(s)
  T.Tamura, T.S.Dhakar, and K.Ohno
- Journal Title
  
  Journal of the Korean Institute of Industrial Engineers 34
  
  Pages: 1-12
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Effectiveness of an Exponentially Smoothed Ordering Policy as Compared with Kanban System2008
- Author(s)
  T.Tamura, T S.Dhakar, K.Ohno
- Journal Title
  
  Journal of the Korean Institute of Industrial Engineers Vol.34, No.1
  
  Pages: 1-12
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Effectiveness of an Exponentially Smoothed Ordering Policy as Cornnorod with Kanban System2008
- Author(s)
  T. Tamura, T. S. Dhakar, K. Ohno
- Journal Title
  
  Journal of the Korean Institute of Industrial Engineers 34
  
  Pages: 1-12
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Formulation of an Optimal Production Sequencing Problem in a Complex Free flow Assembly Line2008
- Author(s)
  T.Tamura, M.Yamazaki, T.S. Dhakar, K.Ohno
- Journal Title
  
  日本経営工学会論文誌 Vol.59,NO.3
  
  Pages: 205-213
- NAID
  110007521755
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Performance evaluation of SCM in JIT environment2008
- Author(s)
  M.Kojima, K.Nakashima, K.Ohno
- Journal Title
  
  International Journal of Production Economics Vol.115, No.2
  
  Pages: 439-443
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] Comparison of Computational Efficiencies between Goal Chasing, SA, TS and GA Algorithms to Optimize Production Sequence in a Free Flow Assembly Line2008
- Author(s)
  T.Tamura, S.Nishikawa, T S.Dhakar, K.Ohno
- Journal Title
  
  Proceedings of APIEMS2008
  
  Pages: 2145-2156
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20510148
[Journal Article] 待ち行列分野のオープンプロブレム2007
- Author(s)
  高木, 大野, 宮沢, 町原, 紀
- Journal Title
  
  オペレーションズ・リサーチ 53
  
  Pages: 138-155
- NAID
  110006532514
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Modeling and Analysis of a Mixed-Model Assembly Line with Stochastic Operation Times2007
- Author(s)
  X. Zhao, J. Liu, K. Ohno, S. Kotani
- Journal Title
  
  Naval Research Logistics 54
  
  Pages: 681-691
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Modeling and Analysis of a Mixed-Model Assembly Line with Stochastic Operation Times2007
- Author(s)
  X. Zhao, J. Liu, K. Ohno and S. Kotani
- Journal Title
  
  Naval Research Logistics 54
  
  Pages: 681-691
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] ニューロ・ダイナミックプログラミングとその応用2007
- Author(s)
  大野勝久
- Journal Title
  
  数理解析研究所講究録 No. 1559
  
  Pages: 138-155
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Modeling and Analysis of a Mixed-Model Assembly Line with Stochastic Operation Times2007
- Author(s)
  X.Zhao, J.Liu, K.Ohno and S.Kotani
- Journal Title
  
  Naval Research Logistics 54
  
  Pages: 681-691
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] ニューロ・ダイナミックプログラミングとその応用2007
- Author(s)
  大野勝久
- Journal Title
  
  数理解析研究所講究録No.1559
  
  Pages: 139-155
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Neuro-Dynamic Programming and its Applications2007
- Author(s)
  K. Ohno
- Journal Title
  
  Research Institute for Mathematical Sciences, Kyoto University, Kokyuroku 1599
  
  Pages: 139-155
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] An integrated production planning problem for a multi-stage production system using Kanban2006
- Author(s)
  M.Kojima, T.Tamura, S.Fujita, K.Ohno and M.Shirata
- Journal Title
  
  Industrial Engineering and Management Systems 5・1
  
  Pages: 11-22
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] A Discrete-Time Load Balancing Problem by Neuro-Dynamic Programming2006
- Author(s)
  A. Inoie, K. Ohno
- Journal Title
  
  Transactions of the Operations Research Society of Japan 49
  
  Pages: 46-61
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] An Integrated Production Planning Problem for a Multi-Stage Production System Using Kanban2006
- Author(s)
  M. Kojima, T. Tamura, S. Fujita, K. Ohno, M. Shirata
- Journal Title
  
  Industrial Engineering and Management Systems 5-1
  
  Pages: 11-22
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] ニューロ・ダイナミックプログラミングによる負荷分散システムの離散時間負荷分散政策2006
- Author(s)
  井家敦, 大野勝久
- Journal Title
  
  日本オペレーションズ・リサーチ学会和文論文誌 49
  
  Pages: 46-61
- NAID
  110006151984
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] ニューロ・ダイナミックプログラミングによる負荷分散システムの離散時間付加分散政策2006
- Author(s)
  井家敦, 大野勝久
- Journal Title
  
  日本オペレーションズ・リサーチ学会和文論文誌 49
  
  Pages: 46-61
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Theory of Inventory for Reflecting the Work Sites2006
- Author(s)
  K. Ohno
- Journal Title
  
  Communications of JIMA 16-5
  
  Pages: 264-268
- NAID
  10018447622
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] 在庫理論は現場をめざす2006
- Author(s)
  大野勝久
- Journal Title
  
  経営システム 16・5
  
  Pages: 264-268
- NAID
  10018447622
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] 在庫理論は現場をめざす2006
- Author(s)
  大野勝久
- Journal Title
  
  経営システム 16・5
  
  Pages: 264-268
- NAID
  10018447622
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] An integrated production planning problem for a multi-stage production system using Kanban2006
- Author(s)
  M.Kojima, T.Tamura, S.Fujita, K.Ohno, M.Shirata
- Journal Title
  
  Industrial Engineering and Management Systems 5・1
  
  Pages: 11-22
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] Effectiveness of an Exponentially Smoothed Ordering Policy in a Multi-Stage Production System2006
- Author(s)
  T.Tamura, S.Dhakar, K.Ohno, M.Kojima
- Journal Title
  
  Proceedings of Int.Conference on Operations and Supply Chain Management 2006 in Bangkok
  
  Pages: 1959-1970
- Data Source
  KAKENHI-PROJECT-18510137
[Journal Article] An optimal control of a failure-prone multi-stage production and distribution system by neuro-dynamic programming and Its comparison with pull systems2005
- Author(s)
  K.Ohno, T.Ito, C.Kumagai
- Journal Title
  
  Proceedings International Conference on Operations and Supply Chain Management
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An optimal control of a failure-prone multi-stage production and distribution system by neuro-dynamic programming2005
- Author(s)
  K.Ohno
- Journal Title
  
  17th Triennial Conference of the International Federation of Operational Research Societies
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 作業時間が確率変動する混合品種組立ラインの投入順序づけ問題2004
- Author(s)
  小谷重徳, 趙暁波, 大野勝久
- Journal Title
  
  日本経営工学会論文誌 55・5
  
  Pages: 241-251
- NAID
  110004050478
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 作業時間が確立変動する混合品種組立ラインの投入順序づけ問題2004
- Author(s)
  小谷重徳, 趙暁波, 大野勝久
- Journal Title
  
  日本経営工学会論文誌 55・5
  
  Pages: 241-251
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] Sequencing Problem for a Mixed-Model Assembly Line in the Toyota Production System2004
- Author(s)
  Shigenori Kotani, Takahiro Ito, Katsuhisa Ohno
- Journal Title
  
  International Journal of Production Research 42-23
  
  Pages: 4955-4974
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 輸送費用と生産制約に関する費用の和を最小化する組立ライン決定問題2004
- Author(s)
  小谷重徳, 大野勝久, 伊藤崇博
- Journal Title
  
  日本オペレーションズ・リサーチ学会和文論文誌 47
  
  Pages: 40-66
- NAID
  110001828241
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An Efficient Approach for the Three-Dimensional Container Packing Problem with Practical Constraints2004
- Author(s)
  Zhihong Jin, Katsuhisa Ohno, Jiali Du
- Journal Title
  
  Asia-Pacific Journal of Operational Research 21-3
  
  Pages: 279-295
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An Allocation Problem of Workers in a U-shaped Line-Separate Allocation vs.Carousel Allocation2004
- Author(s)
  Shuhei Hirao, Takahiro Ito, Koichi Nakade, Mitsutioshi Kojima, Katsuhisa Ohno
- Journal Title
  
  Systems, Control and Information 17-6
  
  Pages: 230-240
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] A Failure-Prone Production and Distribution System by Neuro-Dynamic Programming2004
- Author(s)
  Kenichi Nakashima.Takahiro Ito, Katsuhisa Ohno
- Journal Title
  
  Proceedings of the 1st International Congress on Logistics and SCM Systems
  
  Pages: 120-127
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 複数デポを考慮した時間枠制約付き集配送計画問題2004
- Author(s)
  ボニファシウスプラセティアイチティアル, 田村隆善, 大野勝久, 伊藤崇博
- Journal Title
  
  日本ロジスティクスシステム学会誌 4・2
  
  Pages: 39-48
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] The Vehicle Routing Problem for Multiple Depots with Backhaul and Time Windows2004
- Author(s)
  Bonivasius Prasetya Ichitiarto, Takayoshi Tamura, Katsuhisa Ohno, Takahiro Ito
- Journal Title
  
  Journal of Japan Society of Logistics Systems 4-2
  
  Pages: 39-48
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] A Sequencing Problem of Minimizing the Total Line Stoppage Time of a Mixed-Model Assembly Line with Auxiliary Workers2004
- Author(s)
  Shigenori Kotani, Takahiro Ito, Katsuhisa Ohno
- Journal Title
  
  Journal of Japan Industrial Management Association 54-6
  
  Pages: 399-409
- NAID
  110004050432
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] Sequencing Problem for a Mixed-Model Assembly Line in the Toyota Production System2004
- Author(s)
  S.Kotani, T.Ito, K.Ohno
- Journal Title
  
  International Journal of Production Research 42・23
  
  Pages: 4955-4974
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An Optimal Control of a Production and Distribution System by Neuro-Dynamic Programming and a Comparison of Pull Systems2004
- Author(s)
  Katsuhisa Ohno, Takahiro Ito
- Journal Title
  
  Journal of Japan Industrial Management Association 55-4
  
  Pages: 179-188
- NAID
  110004050471
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] ニューロ・ダイナミックプログラミングによる生産・物流システムの最適制御とプル方式の比較2004
- Author(s)
  大野勝久, 伊藤崇博
- Journal Title
  
  日本経営工学会論文誌 55・4
  
  Pages: 179-188
- NAID
  110004050471
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] A Sequencing Problem for a Mixed-Model Assembly Line with Stochastic Operation Times2004
- Author(s)
  Shigenori Kotani, Zhao Xiaobo, Katsuhisa Ohno
- Journal Title
  
  Journal of Japan Industrial Management Association 55-5
  
  Pages: 241-251
- NAID
  110004050478
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 混合車両組立ラインの投入順序づけ問題2004
- Author(s)
  小谷重徳, 伊藤崇博, 大野勝久
- Journal Title
  
  日本経営工学会論文誌 55・1
  
  Pages: 23-33
- NAID
  110004050455
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An Integrated Production Planning Problem for a Multi-Stage Production System Using Kanban2004
- Author(s)
  Mitsutoshi Kojima, Takayoshi Tamura, Masayuki Shirata, Seiichi Fujita, Katsuhisa Ohno
- Journal Title
  
  Proceedings of the 5th APIEMS
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An Integrated Production Planning Problem for a Multi-Stage Production System Using Kanban2004
- Author(s)
  小島貢利, 田村隆善, 白田雅幸, 藤田精一, 大野勝久
- Journal Title
  
  Proceedings of the 5th APIEMS
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] An Efficient Approach for the Three-Dimensional Container Packing Problem with Practical Constraints2004
- Author(s)
  Z.Jin, K.Ohno, J.Du
- Journal Title
  
  Asia-Pacific Journal of Operational Research 21・3
  
  Pages: 279-295
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] 複数デポを考慮した時間枠制約付き集配送計画問題2004
- Author(s)
  ボニファシウスプラセティアイチティアルト, 田村隆善, 大野勝久, 伊藤崇博
- Journal Title
  
  日本ロジスティクスシステム学会誌 4・2
  
  Pages: 39-48
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] A Sequencing Problem of Minimizing the Total Work Overload with the Constraints of Keeping a Constant Rate of Usage of Every Part Used by an Assembly Line2004
- Author(s)
  Shigenori Kotani, Katsuhisa Ohno
- Journal Title
  
  Journal of Japan Industrial Management Association 55-1
  
  Pages: 23-33
- NAID
  110004050455
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] リリーフマンを考慮した混合車両組立ラインの投入順序づけ問題2004
- Author(s)
  小谷重徳, 伊藤崇博, 大野勝久
- Journal Title
  
  日本経営工学会論文誌 54・6
  
  Pages: 399-409
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] A Failure-Prone Production and Distribution System by Neuro-Dynamic Programming2004
- Author(s)
  K.Nakashima, T.Ito, K.Ohno
- Journal Title
  
  Proceedings of the 1st International Congress on Logistics and SCM Systems
  
  Pages: 120-127
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] U字生産ラインにおける多能工配置問題-分割方式と巡回方式2004
- Author(s)
  平尾周平, 伊藤崇博, 中出康一, 小島貢利, 大野勝久
- Journal Title
  
  システム制御情報学会論文誌 17・6
  
  Pages: 230-240
- NAID
  10013169788
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Journal Article] A Car Production Planning Problem of Minimizing the Total Cost Concerning Transportation and Production Constraints2004
- Author(s)
  Shigenori Kotani, Katsuhisa Ohno, Takahiro Ito
- Journal Title
  
  Transactions of the Operations Research Society of Japan 47
  
  Pages: 40-66
- NAID
  110001828241
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16510112
[Presentation] 最適かんばん方式とニューロDPによる確率的サプライチェーンの最適制御2011
- Author(s)
  大野勝久,坊敏隆,荒川雅裕
- Organizer
  日本経営工学会平成23年度春季大会
- Place of Presentation
  愛知学院大学
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] ニューロDPによる生産システムの最適制御2011
- Author(s)
  大野勝久
- Organizer
  日本機械学会東海支部第60期総会・講演会
- Place of Presentation
  豊橋技術科学大学
- Year and Date
  2011-03-14
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] 一般化かんばん方式とニューロDPによるSCMの最適化に関する研究2010
- Author(s)
  坊敏隆, 大野勝久, 荒川雅裕
- Organizer
  平成22年度日本経営工学会秋季研究大会
- Place of Presentation
  福岡工業大学
- Year and Date
  2010-10-24
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] 一般化かんばん方式とニューロDPによるSCMの最適化に関する研究2010
- Author(s)
  坊敏隆,大野勝久,荒川雅裕
- Organizer
  日本経営工学会平成22年度秋季研究大会
- Place of Presentation
  福岡工業大学
- Year and Date
  2010-10-24
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] 生産・物流システムの最適制御2009
- Author(s)
  大野勝久
- Organizer
  日本機械学会東海支部第58期総会講演会
- Place of Presentation
  岐阜大学
- Year and Date
  2009-03-18
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] Optimal Production Sequencing Problem to Minimize Line Stoppage Time in a Mixed-Model Assembly Line2009
- Author(s)
  T.Tamura, T.Okumura, T.S.Dhakar, K.Ohno
- Organizer
  International Conference on Production Research
- Place of Presentation
  Shanghei, China
- Year and Date
  2009-08-04
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] 不確実な需要に対する各種プル方式による生産・物流システムの比較2009
- Author(s)
  大野勝久
- Organizer
  スケジューリング・シンポジューム2009
- Place of Presentation
  岡山大学
- Year and Date
  2009-09-17
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] 試作ラインの全体最適スケジューリング2009
- Author(s)
  早馬真一, 田村隆善, 大野勝久
- Organizer
  スケジューリング・シンポジューム2009
- Place of Presentation
  岡山大学
- Year and Date
  2009-09-17
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] A New Neuro-Dynamic Programming Algorithm to Determine an Optimal Control of Just-in-time-based Production and Distribution Systems2009
- Author(s)
  大野勝久
- Organizer
  Asia Pacific Industrial Engineering & Management Systems Conference 2009
- Place of Presentation
  Kitakyusyu
- Year and Date
  2009-12-15
- Data Source
  KAKENHI-PROJECT-20510148
[Presentation] Optimal Production Sequencing Problem in a Complex Free Flow Assembly Line2007
- Author(s)
  T. Tamura, M. Yamazaki, T. S. Dhakar, K. Ohno
- Organizer
  The 8th Asia Pacific Industrial Engineering and Management System & 2007 Chinese Institute of Industrial Engineers Conference
- Place of Presentation
  Kaohsiung, Taiwan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Presentation] Optimal Production Sequencing Problem in a Complex Free Flow Assembly Line2007
- Author(s)
  T.Tamura, M.Yamazaki, T.S.Dhakar and K.Ohno
- Organizer
  The 8th Asia Pacific Industrial Engineering &Management System & 2007 Chinese Institute of Industrial Engineers Conference
- Place of Presentation
  Kaohsiung,Taiwan
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Presentation] Optimal Production Sequencing Problem in a Complex Free Flow Assembly Line2007
- Author(s)
  T. Tamura, M. Yamazaki, T. S. Dhakar and K. Ohno
- Organizer
  The 8th Asia Pacific Industrial Engineering & Management System & 2007 Chinese Institute of Industrial Engineers Conference
- Place of Presentation
  Kaohsiung, Taiwan
- Data Source
  KAKENHI-PROJECT-18510137
[Presentation] Effectiveness of an Exponentially Smoothed Ordering Policy in a Multi-Stage Production System2006
- Author(s)
  T.Tamura, T.S.Dhakar, K.Ohno and M.Kojima
- Organizer
  Proceedings of Int.Conference on Operations and Supply Chain Management
- Place of Presentation
  Bangkok
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510137
[Presentation] Effectiveness of an Exponentially Smoothed Ordering Policy in a Multi-Stage Production System2006
- Author(s)
  T. Tamura, T. S. Dhakar, K. Ohno, M. Kojima
- Organizer
  Int. Conference on Operations and Supply Chain Management
- Place of Presentation
  Bangkok
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510137

1. NAKADE Koichi (50207825)

# of Collaborated Projects: 10 results

# of Collaborated Products: 2 results
2. TAMURA Takayoshi (70093101)

# of Collaborated Projects: 7 results

# of Collaborated Products: 30 results
3. TAMAKI Mitsushi (40121876)

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
4. KOJIMA Mitsutoshi (20273310)

# of Collaborated Projects: 5 results

# of Collaborated Products: 4 results
5. SUZUKI Tatuo (00064949)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. OHI Fumio (60116001)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
7. 熊谷智徳 (30024178)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
8. KONDO Takashi (60121357)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. TAKAHASHI Yukio (70016153)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. IWASE Masaharu (70213288)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
11. MAKIMOTO Naoki (90242263)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. TAKINE Tetsuya (00216821)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. MIYAZAWA Masakiyo (80110948)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. TAKAHASHI Katsuhiko (00187999)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. JIN Zhihong (00324476)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. ITO Masaru (80221026)

# of Collaborated Projects: 1 results

# of Collaborated Products: 18 results
17. MORIMURA HIDENORI (50016010)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. MORI MASAO (80016568)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. KAMEDA HISAO (10011660)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. HASEGAWA TOSIHARU (40025911)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. 稲村豊四郎 (60107539)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. 武澤伸浩 (50236452)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. 沢木勝茂 (80065482)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. 仁科健 (60115681)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. TAKAHASHI Yoshitaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. 高橋輝男

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

OHNO Katuhisa 大野 勝久

大野 勝久 オオノ カツヒサ

OHNO KATUHISA 大野 勝久

Research Projects

Research Products

Co-Researchers

不確実環境下における多品種サプライチェーンの最適制御に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Studies on optimization of SCM by the generalized kanban system and neuro-dynamic programmingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on a creation of supply chain management based on the JIT principlePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on IT-based Evolution of JIT production systemsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study of construction of optimal production and distributio systems based on JIT philosophyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A study on the best choice problem based on the ranks of observations

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

環境を重視した次世代生産・物流システムの構築に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

Development and evaluation of next generation production and distribution systemsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

次世代生産・物流システムの開発に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on New Methods for Performance Evaluation of Communication Networks

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

次世代生産・物流システムの構築と評価に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

環境適応を重視したジャストインタイム生産経営方式に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

環境適応を重視したジャストインタイム生産経営方式に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

OHNO Katuhisa 大野勝久

大野勝久オオノカツヒサ

OHNO KATUHISA 大野勝久

[Book] 進化技術ハンドブック第I巻基礎編2010

[Book] 進化技術ハンドブック第I巻基礎編2010