NISHIBORI Kenji 西堀賢司

… Alternative Names

西堀賢司ニシボリケンジ

Less

Researcher Number	50115614
Other IDs
External Links
Affiliation (Current)	2025: 公益財団法人名古屋産業科学研究所, 研究部, 上席研究員
Affiliation (based on the past Project Information) *help	2016: 公益財団法人名古屋産業科学研究所, 研究部, 上席研究員 2015: 公益財団法人名古屋産業科学研究所, その他部局等, 上席研究員 2014: 公益財団法人名古屋産業科学研究所, その他部局等, 研究員 2013 – 2014: 大同大学, 工学部, 名誉教授 2011 – 2012: 大同大学, 工学部, 教授 … More 2004 – 2007: 大同工業大学, 工学部, 教授 2000 – 2001: 大同工業大学, 工学部, 教授 1993 – 1995: 大同工業大学, 工学部, 教授 1991 – 1992: 大同工業大学, 助教授 1987: 名古屋大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Intelligent mechanics/Mechanical systems / Fluid engineering / Intelligent mechanics/Mechanical systems Except Principal Investigator Fluid engineering
Keywords	Principal Investigator アクチュエータ / Ultrasonic Motor / ロボットハンド / 超音波モータ / Pulse Width Modulation / 散乱光 / 距離計測 / センサ / 光応用計測 / Light Source … More / Scattered Light / Measuring Equipment / Distance Measurement / Sensor Probe / Deep Hole / Position Sensitive Detector / Optical Measurement / 内径計測 / PSD / 半導体位置検出素子 / LED光源 / Direct Drive / Traveling Wave / Piezoelectric Element / Separation of Degeneration / Single-Phase Drive / Vibration Analysis / Mechatronics and Robotics / 進行波 / 圧電素子 / ダイレクトドライブ / 単相駆動 / Friction Force / Self-Locking / Grasping Force / Robot Hand / 摩擦力 / 自己保持力 / パルス幅変調(PWM) / 把持力 / Rotary Machinery / Fuzzy Control / Torque Transmission / Fluid Coupling / Magnetic Fluid / Actuator / Mechatronics / 制御装置 / 学習制御 / ニューラルネット / 回転機械 / ファジィ制御 / パルス幅変調 / トルク伝達 / 流体継手 / 磁性流体 / メカトロニクス / 微小じょう乱 / らせん渦 / 不安定性 / 遷移 / 境界層 / 旋回流 / 回転直管 / 自動化 / 樹脂キャップ / シミュレーション / 括り作業 / ロボット / 絞り染め / 伝統工芸 / 小径深穴 / レーザ光 / プローブ … More Except Principal Investigator Robot hand / Ultrasonic motor / Hot rolling / Simulation / Material model / Hot forging / forging / Casting / Thixo-forging / 半溶融 / 連続鍛造 / 温間鍛造 / 温・熱間鍛造 / 複合押出し / ロボットハンド / 超音波モータ / 材料モデル / シミュレーション / 熱間圧延 / 熱間鍛造 / 半溶融鍛造 / 鋳造・鍛造 / ROTATING DISK / TORQUE CONVERTER / FLUID MACHINERY / MAGNETIC FLUID / MECHATRONICS / 流体継手 / 磁性流体 / メカトロニクス Less

Practical Application Robots for Tying Task on Tie-Dyeing of Japanese Traditional Craft ShiboriPrincipal Investigator
- Principal Investigator
  
  Nishibori Kenji
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Nagoya Industrial Science Research Institute
Development of Sensing Probe for Deep Hole MeasurementsPrincipal Investigator
- Principal Investigator
  
  NISHIBORI Kenji
- Project Period (FY)
  2011 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Daido University
Development of Optical Sensor Probe for Deep Hole Measurement Using Position Sensitive DetectorPrincipal Investigator
- Principal Investigator
  
  NISHIBORI Kenji
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Daido Institute of Technology
Direct Drive and Vibration Analysis of Ultrasonic Motor for Robot HandPrincipal Investigator
- Principal Investigator
  
  NISHIBORI Kenji
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Daido Institute of Technology
Grasping Force Control of Robot Hand with Fingers using Ultrasonic MotorsPrincipal Investigator
- Principal Investigator
  
  NISHIBORI Kenji
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Daido Institute of Technology
Torque Control of Magnetic fluid Coupling under Pulse Width ModulationPrincipal Investigator
- Principal Investigator
  
  NISHIBORI Kenji
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Daido Institute of Technology
Study on Energy Saving in Metal Forming Processes
- Principal Investigator
  
  ONO Munenori, TOZAWA Yasuhisa
- Project Period (FY)
  1993 – 1995
- Research Category
  
  Grant-in-Aid for international Scientific Research
- Research Institution
  Daido Institute of Technology
DEVELOPMENTAL STUDY ON HIGH PERFORMANCE TORQUE CONVERTER USING MAGNETIC FLUID
- Principal Investigator
  
  KIKUYAMA Koji
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Fluid engineering
- Research Institution
  NAGOYA UNIVERSITY
軸回りに回転する直管内の流れの不安定性に関する研究Principal Investigator
- Principal Investigator
  
  西堀賢司
- Project Period (FY)
  1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Fluid engineering
- Research Institution
  Nagoya University

All 2016 2012 2011 2008 2007 2006 2005 Other

All Journal Article Presentation Patent

[Journal Article] 円環形超音波モータを関節に用いたロボットハンド2006
- Author(s)
  吉岡慧, 西堀賢司
- Journal Title
  
  日本機械学会東海学生会第37回学生員講演会講演前刷集
  
  Pages: 157-158
- Data Source
  KAKENHI-PROJECT-16560232
[Journal Article] Robot Hand Using Cylinder-Shaped Ultrasonic Motors at Its Joints2006
- Author(s)
  Satoru YOSHIOKA, Kenji NISHIBORI
- Journal Title
  
  Proc.of 37th JSME Tokai Branch Student Conference
  
  Pages: 157-158
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560232
[Journal Article] LED光源を用いた深穴の内径および鉛直度の計測2006
- Author(s)
  西堀賢司, 片桐敬博, 前迫大器, 石田敏彦
- Journal Title
  
  日本機械学会ロボティクス・メカトロニクス講演会 06-4
- Data Source
  KAKENHI-PROJECT-18560260
[Journal Article] 円環形超音波モータを関節に用いたロボットハンド2006
- Author(s)
  吉岡慧, 西堀賢司
- Journal Title
  
  日本機械学会東海学生会第37回学生員講演会講演前刷集
  
  Pages: 157-158
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560232
[Journal Article] Optimization of Driving Characteristics of Ultrasonic Motor for Robot Hand2005
- Author(s)
  Kenji NISHIBORI, Yutaka YAMAGUCHI
- Journal Title
  
  Proc.of 55th JSME Tokai Branch Conference No.053-1
  
  Pages: 45-46
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560232
[Journal Article] ロボットハンド用超音波モータの駆動特性の最適化2005
- Author(s)
  西堀賢司, 山口豊
- Journal Title
  
  日本機械学会東海支部第53期総会講演会講演論文集 053-1
  
  Pages: 45-46
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560232
[Patent] 光学式測定装置2008
- Inventor(s)
  西堀賢司, 前迫大器, 岸友三, 佐藤幸
- Industrial Property Rights Holder
  大同学園菱栄エンジニアリング
- Industrial Property Number
  2008-020562
- Filing Date
  2008-01-31
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Patent] 特許権2008
- Inventor(s)
  西堀賢司, 前迫大器, 岸友三, 佐藤幸
- Industrial Property Rights Holder
  大同学園菱栄エンジニアリング
- Industrial Property Number
  2008-020562
- Filing Date
  2008-01-31
- Data Source
  KAKENHI-PROJECT-18560260
[Patent] 光学式測定装置及び光学式測定方法2007
- Inventor(s)
  西堀賢司, 前迫大器, 岸友三
- Industrial Property Rights Holder
  大同工業大学, 菱栄エンジニアリング(株)
- Industrial Property Number
  2006-343340
- Filing Date
  2007-12-20
- Data Source
  KAKENHI-PROJECT-18560260
[Patent] 光学式測定装置及び光学式測定方法2006
- Inventor(s)
  西堀賢司, 前迫大器, 岸友三
- Industrial Property Rights Holder
  大同学園菱栄エンジニアリング
- Industrial Property Number
  2006-343340
- Filing Date
  2006-12-20
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] 有松・鳴海絞りにおけるキャップ装着ロボットの小型化2016
- Author(s)
  伊藤拓磨，西堀研人，篠原主勲，西堀賢司
- Organizer
  日本機械学会東海支部第65期総会・講演会
- Place of Presentation
  愛知工業大学
- Year and Date
  2016-03-17
- Data Source
  KAKENHI-PROJECT-26420218
[Presentation] 有松・鳴海絞りロボットを用いた布挙動の有限要素解析2016
- Author(s)
  大脇卓也, 吉原寛文，西堀賢司，西堀研人，篠原主勲
- Organizer
  日本機械学会東海支部第65期総会・講演会
- Place of Presentation
  愛知工業大学
- Year and Date
  2016-03-17
- Data Source
  KAKENHI-PROJECT-26420218
[Presentation] 散乱光を用いた極細センサプローブによる小径深穴の計測2012
- Author(s)
  西堀研人，前迫大器，西堀賢司
- Organizer
  日本機械学会
- Place of Presentation
  浜松市
- Data Source
  KAKENHI-PROJECT-23560303
[Presentation] Measurements of Inclination Angle and Distance of Curved Mirror Using LED Light Sources2012
- Author(s)
  Kento Nishibori, Kenji Nishibori
- Organizer
  The 38th Annual Conference of the IEEE Industrial Electronics Society
- Place of Presentation
  Montreal, Canada
- Data Source
  KAKENHI-PROJECT-23560303
[Presentation] 散乱光を用いた小径深穴計測用センサプローブの開発2011
- Author(s)
  西堀研人，前迫大器，西堀賢司
- Organizer
  計測自動制御学会第54回自動制御連合講演会
- Place of Presentation
  豊橋技術科学大学
- Data Source
  KAKENHI-PROJECT-23560303
[Presentation] Optical Measurements of Inner Diameter and Inclination Angle of Deep Hole Using 2-dimensional PSD2008
- Author(s)
  Kenji NISHIBORI, Taiki MAESAKO, Toshihiko ISHIDA
- Organizer
  The 57th Tokai Branch Conference of the Japan Society of Mechanical Engineers
- Place of Presentation
  Nagoya University
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] 2次元PSDを用いた深穴の内径および鉛直度の光学計測2008
- Author(s)
  西堀賢司, 前迫大器, 石田敏彦
- Organizer
  日本機械学会東海支部第57期総会講演会
- Place of Presentation
  名古屋大学
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] PSDを用いた深孔計測用光学式センサプローブの開発2007
- Author(s)
  西堀賢司, 前迫大器, 石田敏彦
- Organizer
  日本ロボット学会第25回学術講演会
- Place of Presentation
  千葉工業大学
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] Development of Optical Sensor Probe for Deep Hole Measurement Using PSD2007
- Author(s)
  Kenji NISHIBORI, Taiki MAESAKO, Toshihiko ISHIDA
- Organizer
  The 25th Annual Conference of the Robotics Society of Japan
- Place of Presentation
  Chiba Institute of Technology
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] Measurement of Inside Diameter and Inclination Angle of Deep Hole Using LED Light Sources2006
- Author(s)
  Kenji NISHIBORI, Takahiro KATAGIRI, Taiki MAESAKO, Toshihiko ISHIDA
- Organizer
  2006 JSME Conference on Robotics and Mechatronics
- Place of Presentation
  Waseda University
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] LED光源を用いた深穴の内径および鉛直度の計測2006
- Author(s)
  西堀賢司, 片桐敬博, 前迫大器, 石田敏彦
- Organizer
  日本機械学会ロボティクス・メカトロニクス講演会2006
- Place of Presentation
  早稲田大学
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560260
[Presentation] 有松・鳴海絞りロボットの構造の信頼性評価
- Author(s)
  伊藤悠馬，篠原主勲，杉山卓也，西堀研人，西堀賢司
- Organizer
  日本機械学会東海支部第64期総会・講演会
- Place of Presentation
  中部大学
- Year and Date
  2015-03-13 – 2015-03-14
- Data Source
  KAKENHI-PROJECT-26420218
[Presentation] 伝統工芸「有松・鳴海絞り」における簡易型キャップ装着機（構造の簡略化と作業性の向上）
- Author(s)
  河野晋，西堀賢司，杉山卓也，西堀研人，篠原主勲
- Organizer
  日本機械学会東海支部第64期総会・講演会
- Place of Presentation
  中部大学
- Year and Date
  2015-03-13 – 2015-03-14
- Data Source
  KAKENHI-PROJECT-26420218
[Presentation] 有松・鳴海絞りロボットの信頼性評価
- Author(s)
  伊藤悠馬，篠原主勲，杉山卓也，西堀研人，西堀賢司
- Organizer
  日本機械学会第27回計算力学講演会
- Place of Presentation
  岩手大学
- Year and Date
  2014-11-22 – 2014-11-24
- Data Source
  KAKENHI-PROJECT-26420218

1. NISHIBORI Kento (50397452)

# of Collaborated Projects: 3 results

# of Collaborated Products: 8 results
2. ONO Munenori (80087171)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. TOZAWA Yasuhisa (20022965)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. YOKOYAMA Yayoi (40367644)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. IKEDA Youichi (40212790)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. KIKUYAMA Koji (90023192)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. HASEGAWA Yutaka (20198732)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. HOSINO Katsuei (50131149)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. KOMORI Kazutake (10178379)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 篠原主勲 (50456167)

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
11. MAESAKO Daiki

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
12. KOBAYASHI Yukio

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. SUGIYAMA Takuya

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
14. KONDOU Norichika

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. OHMI Atsushi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. KATAGIRI Hidenori

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. KUMADA Yoshio

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. ROLF Bunten

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. UDO Zitz

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. REINER Kopp

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. GOTTFRIED Be

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. RAINER Thoma

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. 五十川幸広

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

NISHIBORI Kenji 西堀 賢司

西堀 賢司 ニシボリ ケンジ

Research Projects

Research Products

Co-Researchers

Practical Application Robots for Tying Task on Tie-Dyeing of Japanese Traditional Craft ShiboriPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Sensing Probe for Deep Hole MeasurementsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Optical Sensor Probe for Deep Hole Measurement Using Position Sensitive DetectorPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Direct Drive and Vibration Analysis of Ultrasonic Motor for Robot HandPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Grasping Force Control of Robot Hand with Fingers using Ultrasonic MotorsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Torque Control of Magnetic fluid Coupling under Pulse Width ModulationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Energy Saving in Metal Forming Processes

Principal Investigator

Project Period (FY)

Research Category

Research Institution

DEVELOPMENTAL STUDY ON HIGH PERFORMANCE TORQUE CONVERTER USING MAGNETIC FLUID

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

軸回りに回転する直管内の流れの不安定性に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 円環形超音波モータを関節に用いたロボットハンド2006

Author(s)

Journal Title

Data Source

[Journal Article] Robot Hand Using Cylinder-Shaped Ultrasonic Motors at Its Joints2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] LED光源を用いた深穴の内径および鉛直度の計測2006

Author(s)

Journal Title

Data Source

[Journal Article] 円環形超音波モータを関節に用いたロボットハンド2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Optimization of Driving Characteristics of Ultrasonic Motor for Robot Hand2005

Author(s)

Journal Title

Description

NISHIBORI Kenji 西堀賢司

西堀賢司ニシボリケンジ