KATO Masaharu 加藤雅治

Researcher Number	50161120
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2011 – 2015: 東京工業大学, 総合理工学研究科(研究院), 教授 2014: 東京工業大学, 大学院総合理工学研究科, 教授 1995 – 2012: Tokyo Institute of Technology, Department of Materials Science and Engineering,, 大学院・総合理工学研究科, 教授 2006 – 2010: 東京工業大学, 総合理工学研究科, 教授 2005 – 2006: 東京工業大学, 大学院総合理工学研究科, 教授 … More 1998: 東京工業大学, 大学院・総合理学工学研究科, 教授 1992 – 1994: 東京工業大学, 総合理工学研究科, 助教授 1988 – 1992: 東京工業大学, 大学院総合理工学研究科, 助教授 1991: 東京工業大学, 総合理工学研究所, 助教授 1990: Tokyo Institute of Technology The Graduate School at Department of Materials Sci, 大学院・総合理工学研究科, 助教授 1986: Tokyo Institute of Technology, 大学院総合理工学研究科, 助教授 Less
Review Section/Research Field	Principal Investigator Structural/Functional materials / Physical properties of metals / 金属材料(含表面処理・腐食防食) / Science and Engineering / Science and Engineering Except Principal Investigator Structural/Functional materials / 金属材料(含表面処理・腐食防食) / Structural/Functional materials / Physical properties of metals / Physical properties of metals … More / Composite materials/Physical properties / Physical properties of metals / Science and Engineering / Composite materials/Physical properties / Science and Engineering Less
Keywords	Principal Investigator FIM / 転位組織 / 繰り返し変形 / 転位 / Interface / Epitaxy / Crystallography / Deposition / Thin film / エピタキシャル方位関係 … More / 真空蒸着 / 界面 / エピタキシャル関係 / 結晶学 / 蒸着 / 薄膜 / cross slip / precipitates stacking fault energy / dislocation structure / cyclic deformation / fatigue / aluminum / copper / 転位組織図 / persistent slip band組織 / 純銅単結晶 / 変形の局在化 / セル組織 / 純アルミニウム単結晶 / 転位組織発達過程 / すべり線 / 交差すべり / 積層欠陥エネルギー / 析出粒子 / 疲労試験 / アルミニウム / 銅 / Elasticity / Creep / Orowan mechanism / Diffusional relaxation / High-temperature deformation / Dispersion-hardened alloys / 弾性論 / クリープ / オロワン機構 / 拡散緩和 / 高温変形 / 分散強化合金 / Dislocation Structure / Martensitic Transformation / Dispersed Particles / Precipitates / Copper-Iron Alloy / Cyclic Deformation / Fatigue / 陶ー鉄合金 / 銅ー鉄合金 / マルテンサイト変態 / 分散粒子 / 析出物 / 銅-鉄合金 / 疲労 / 力学物性 / 物性実験 / 結晶欠陥 / 構造材料 / 熱活性化変形過程 / 結晶粒界 / 力学特性 / 超微細結晶粒 / バルクナノメタル / 強度の加算則 / ARB / ECAP / ARB加工 / ECAP加工 / 中性子回折 / 結晶粒微細化 / 破壊靭性 / ひずみ速度依存性 / 強化機構 / 機械的性質 / 状態図 / 組織制御 / 規則構造 / Al_3Ti / TiAl / 金属間化合物 … More Except Principal Investigator 高温変形 / マイクロメカニックス / 析出物 / 時効析出 / 平衡形状 / 粒界拡散 / マルテンサイト変態 / 粒界すべり / 高温破壊 / 磁気異方性 / elastic strain energy / micromechanics / 弾性ひずみエネルギー / Boundary energy / 粒界エネルギー / Dispersion-hardened alloy / 粒界破壊 / 分散強化合金 / 析出粒子 / 繰り返し変形 / 疲労 / 結晶粒界 / 延性 / 強度 / 粒界 / 転位 / 導電性材料 / 析出強化 / 時効硬化 / 材料組織 / 銅合金 / 電子・電気材料 / 擬多面体 / 粒界移動 / Cu-Fe二元系合金 / 溶解反応 / 組織制御 / Microscope / High voltage electron / Shape memory alloy / deformation / High temperature / Refractory alloys / In-situ observation / スピノーダル分解 / なお、耐熱合金の一つ、Ni_3Alに関する予備実験は、電顕内引張試験用試料の作製に成功し、目下高温クリープ装置の完成を待っている状態である。 / 東京工業大学には、昭和56年3月に超高電圧・超高真空・高分解能電子顕微鏡(1250KV,日立製作所製)が設置され、順調に稼動しており、前回の科学研究費で試作した一軸引張応力下における照射実験を行ってきた。 / スピノ-ダル分解 / 超高圧電子顕微鏡 / 形状記憶合金 / 耐熱合金 / 電顕内その場観察 / Boundary sliding / Electron radiation damage / Boundary precipitation / Diffusion / Oxygen segregation / Grain boundary / Copper / 2次欠陥 / 電子線損傷 / 粒界析出 / 拡散 / 酸素偏析 / 粒界エネルギ- / 銅 / Precipitation / External magnetic field / Martensitic transformation / Magnetic anisotropy / 外部磁場 / martensitic transformation / dislocation structure / Cu-Fe alloy / precipitation-hardened alloy / cyclic deformation / fatigue / 応力一歪曲線 / 転位組織 / Cu-Fe合金 / 析出強化合金 / Diffusion-controlled deformation / Intermediate-temperature Embrittlement / Void growth / Intergranular fracture / Grain-boundary sliding / High-temperature fracture / 動的再結晶 / 結晶粒界介在物 / 引張試験 / 拡散律速変形 / 中間温度脆性 / ボイド成長 / crystal defects / plastic deformation / grain boundary / high-temperature fracture / high-temperature deformation / 結晶欠陥 / 塑性変形 / age hardening / particle shape / high resolution electron microscopy / yield stress / invariant line / crystallographic orientation relationship / precipitation hardening / 飽和磁化 / 加工熱処理 / 高導電性Cu基合金 / 分散強化 / 形状安定性 / 粒子形態 / ナノ粒子 / 降伏点降下現象 / 不変線 / 粒子形状 / 高分解能電子顕微鏡観察 / 降伏応力 / 不変線条件 / 結晶学的方位関係 / precipitates / material strengthening / toroid / 材料強化 / 円環体 / superalloy / equilibrium shape / precipitate / misfit strain / supersphere / superellipsoid / 等方弾性体 / 立方晶 / eigen ひずみ / 超合金 / ミスフィットひずみ / 超球 / 超楕円体 / multi-Phase alloys / alloy design / microstructure control / intermetallic compound / toughness / strength / trade-off balancing / 靱性(じん性) / 多相材料 / 脆性相 / 金属材料 / 靭性(じん性) / 組織 / Silica particle / Mechanical property / Tilt boundary / Bicrystal / シリカ粒子 / 透過型電子顕微鏡 / 傾角粒界 / 双結晶 / Elasticity / Micromechanics / Creep / Grain-boundary fracture / Liquid particle / Grain-boundary void / High-temperature deformation / 弾性論 / クリープ / 液体粒子 / 粒界ボイド / Interdiffusion / Dissolution Reaction / Fe-Cu Binary System / Diffusion Controlled Grain Boundary Migration / Diffusion Induced Recrystallization / 相互拡散 / 拡散律速型界面移動 / 拡散誘起再結晶 / 繰り返し軟化 / 銅合金単結晶 / 金属疲労 / 電気・電子材料 / 不均一変形 / 析出強化型合金 / 界面エネルギー密度 / 異相界面 / エネルギー論 / 表面・界面・粒界物性 / 共通試料 / 成果発信 / 連携 / 超微細粒 / ナノ結晶 / 構造用金属材料 / 力学特性 / バルクナノメタル / 社会基盤構造材料 / 構造・機能材料 / シリサイド / コルソン合金 / 導電材料 / 銅基合金 / 微粒子 / 界面 / 表面 / マルチスケール計算 / 材料メカニックス / 形状不変加工 / 高密度格子欠陥 / 巨大ひずみ / 化学的駆動力 / 再結晶 / 拡散律速型相変態 / 拡散対 / 全率固溶体 / 組織変化 / 拡散型相変態 / 整合析出 / 界面移動 / 析出反応 / 拡散律速型変態 / B2型規則構造 / Co基合金 / 合金設計 / 金属間化合物 Less

Management of Collaborative Research Works within the Bulk Nanostructure Metals Project
- Principal Investigator
  
  TSUJI Nobuhiro
- Project Period (FY)
  2010 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Kyoto University
Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured MetalsPrincipal Investigator
- Principal Investigator
  
  KATO Masaharu
- Project Period (FY)
  2010 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
- Review Section
  
  Science and Engineering
- Research Institution
  Tokyo Institute of Technology
Understanding of small particles shapes in crystalline materialswith a pseudo-polyhedral approximation
- Principal Investigator
  
  ONAKA Susumu
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
Improvement of fatigue resistance in high conductivity copper alloysby microstructural control
- Principal Investigator
  
  FUJII Toshiyuki
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
Origin of particle shape of pseudo-polyhedral precipitates in alloys
- Principal Investigator
  
  ONAKA Susumu
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Composite materials/Physical properties
- Research Institution
  Tokyo Institute of Technology
Microstructural control of high -strengthened copper alloys for post-Corson alloy
- Principal Investigator
  
  FUJII Toshiyuki
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
Mechanics of high-density lattice defect materialsPrincipal Investigator
- Principal Investigator
  
  KATO Masaharu
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Tokyo Institute of Technology
Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects
- Principal Investigator
  
  HORITA Zenji
- Project Period (FY)
  2006 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Kyushu University
Effects of grain-boundaries on high-temperature fracture discussed by experiments using double cylindrical bicrystals
- Principal Investigator
  
  ONAKA Susumu
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
High strength and high conductivity nanoparticle-precipitated copper ally : optimizaiton of thermomechanical processing
- Principal Investigator
  
  FUJII Toshiyuki
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
Strengthening of materials caused by dispersion of doughnut-like second phase
- Principal Investigator
  
  ONAKA Susumu
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
Construction of Dislocation Structure Diagrams for Life Assessment of MaterialsPrincipal Investigator
- Principal Investigator
  
  KATO Masaharu
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
Trade-off Balancing between Strength and Toughness of Multi-Phase alloys containing Brittle Phases
- Principal Investigator
  
  MISHIMA Yoshinao
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Composite materials/Physical properties
- Research Institution
  Tokyo Institute of Technology
Analysis on mechanical states and stable shapes of coherent precipitates in elastically anisotropic materials with a superellipsoidal approximation
- Principal Investigator
  
  ONAKA Masaharu
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
構造変化を伴わない純粋な拡散律速型界面・粒界移動による組成不連続相変態の反応挙動
- Principal Investigator
  
  梶原正憲
- Project Period (FY)
  1999
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas (A)
- Research Institution
  Tokyo Institute of Technology
Relationships between character and mechanical properties of symmetric and asymmetric grain boundaries
- Principal Investigator
  
  KAJIHARA Masanori
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
拡散誘起再結晶を利用して界面性格を制御した拡散型相変態の反応挙動
- Principal Investigator
  
  梶原正憲
- Project Period (FY)
  1998
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas (A)
- Research Institution
  Tokyo Institute of Technology
Effects of grain-boundary liquid particles on fracture of a copper bicrystal
- Principal Investigator
  
  ONAKA Susumu
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
High-Temperature Deformation and Diffusional Relaxation of Particle-Dispersion Hardened AlloysPrincipal Investigator
- Principal Investigator
  
  KATO Masaharu
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tokyo Institute of Technology
A New Alloy Design Method utilizing Diffusion Induced Recrystallization
- Principal Investigator
  
  KAJIHARA Masanori
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
Ll_0型金属間化合物TiAlのDO_<22>型金属間化合物Al_3Ti析出による組織制御Principal Investigator
- Principal Investigator
  
  加藤雅治
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
安定相および準安定相の共存する合金中の析出・溶解反応
- Principal Investigator
  
  KAJIHARA Masanori
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
B2型金属間化合物を主体とする高温構造用材料の合金設計
- Principal Investigator
  
  MISHIMA Yoshinao
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Tokyo Institute of Technology
Fatigue Tests of Copper Single Crystals with Martensitically Transformable Small Dispersed Iron ParticlesPrincipal Investigator
- Principal Investigator
  
  KATO Masaharu
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Tokyo Institute of Technology
"Magnetic Effects on the Martensitic Transformation of an Fe Based Shape Memory Alloy and a Coherent Fe Particle"
- Principal Investigator
  
  SATO Akikazu
- Project Period (FY)
  1988 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
Crystallography of Thin Metal Film Deposited onto Planar and Spherical Metal SubstratesPrincipal Investigator
- Principal Investigator
  
  KATO Masaharu
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
Evaluation of Boundary Energies by the Shape of Boundary Inclusions
- Principal Investigator
  
  MORI Tsutomu
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Tokyo Institute of Technology
"Creep Test of New Materials at High Temperatures in a HVEM"
- Principal Investigator
  
  SATO Akikazu
- Project Period (FY)
  1988 – 1990
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B).
- Research Field
  
  Physical properties of metals
- Research Institution
  Tokyo Institute of Technology
The Effects of Grain-Boundary Inclusions on High-Temperature Fracture of Metals
- Principal Investigator
  
  TANAKA Ryohei
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Yokohama National University
  Tokyo Institute of Technology
Fatigue Tests of Copper-Iron Alloys with Precipitated Iron Particles
- Principal Investigator
  
  HORIE Shiro
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Tokyo Institute of Technology

All 2014 2013 2012 2011 2010 2009 2008 2007 2003 Other

All Journal Article Presentation

[Journal Article] Hall–Petch Relationship and Dislocation Model for Deformation of Ultrafine-Grained and Nanocrystalline Metals2014
- Author(s)
  M. Kato
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 55 Issue: 1 Pages: 19-24
- DOI
  10.2320/matertrans.MA201310
- NAID
  130004825112
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102006
[Journal Article] Effects of Rolling Reduction and Strength of Composed Layers on Bond Strength of Pure Copper and Aluminium Alloy Clad Sheets Fabricated by Cold Roll Bonding2014
- Author(s)
  Y. Miyajima, K. Iguchi, S. Onaka, and M. Kato
- Journal Title
  
  Adv. Mater. Sci. Eng.
  
  Volume: - Pages: 614821-614821
- DOI
  10.1155/2014/614821
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PLANNED-22102006
[Journal Article] Effects of Temperature and Strain Rate on Plastic Deformation of Ultrafine-Grained Copper Prepared by Equal-Channel Angular Pressing2014
- Author(s)
  S. Okubo, H. Abe, Y. Miyajima, T. Fujii, S. Onaka, and M. Kato
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 55 Issue: 10 Pages: 1525-1530
- DOI
  10.2320/matertrans.M2014172
- NAID
  130004678159
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102006
[Journal Article] Low-Temperature Fatigue Behaviour and Development of Dislocation Structure in Aluminium Single Crystals with Single-Slip Orientation;2013
- Author(s)
  Y.Nakanishi,H.Tanaka,T.Fujii,S. Onaka and M.Kato
- Journal Title
  
  Philosophical Magazine
  
  Volume: (掲載決定) Issue: 21 Pages: 2759-2768
- DOI
  10.1080/14786435.2013.786193
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560690
[Journal Article] Effects of Si on mechanical properties and microstructure evolution in ultrafinegrained Cu-Si alloys processed by accumulative roll bonding2013
- Author(s)
  Y. Miyajima, H. Abe, T. Fujii, S. Onaka and M. Kato
- Journal Title
  
  Acta Materialia
  
  Volume: 61 Issue: 5 Pages: 1537-1544
- DOI
  10.1016/j.actamat.2012.11.031
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102006
[Journal Article] Stability of Fatigued Dislocation Wall Structure in Coarse-Grained and Ultrafine-Grained Aluminum against Monotonic Tensile Deformation2013
- Author(s)
  Y.Nakanishi,Y.Miyajima,T.Fujii,S.Onaka and M. Kato
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 54 Issue: 1 Pages: 43-49
- DOI
  10.2320/matertrans.M2012280
- NAID
  130004824977
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560690, KAKENHI-PLANNED-22102006
[Journal Article] Morphological and crystallographic characteristics of incoherent octahedral Coprecipitates in Cu matrix2012
- Author(s)
  T.Miyazawa, Y.Ozawa, Y.Miyajima, T.Fujii, S.Onaka, M.Kato
- Journal Title
  
  Materials Transactions
  
  Volume: (印刷中)(掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560657
[Journal Article] Morphological and Crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix2012
- Author(s)
  T.Miyazawa,Y.Ozawa,Y.Miyajima,T.Fujii,S.Onaka and M.Kato
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 53 Issue: 5 Pages: 893-901
- DOI
  10.2320/matertrans.M2011335
- NAID
  130004824846
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560657, KAKENHI-PROJECT-22560690
[Journal Article] Shape and Elastic State of Nano-sized Ag Precipitates in a Cu-Ag single crystal2011
- Author(s)
  T.Miyazawa, T.Fujii, S.Onaka, M.Kato
- Journal Title
  
  Journal of Materials Science
  
  Volume: (In press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560657
[Journal Article] Effects of Si Addition on Mechanical Properties of Copper Severely Deformed by Accumulative Roll-Bonding2011
- Author(s)
  T.Kunimine, T.Fujii, S.Onaka, N.Tsuji, M.Kato
- Journal Title
  
  J.Mater.Sci.
  
  Volume: 46 Issue: 12 Pages: 4290-4295
- DOI
  10.1007/s10853-010-5235-4
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102002, KAKENHI-PLANNED-22102006
[Journal Article] Inverse temperature dependence of activation volume in ultrafine-grained copper processed by accumulative roll-bonding2011
- Author(s)
  T.Kunimine, T.Aragaki, T.Fujii, S.Onaka, M.Kato
- Journal Title
  
  J.Mater.Sci.
  
  Volume: 12 Issue: 12 Pages: 4302-4307
- DOI
  10.1007/s10853-010-5243-4
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102006
[Journal Article] Effects of Si Addition on Mechanical Properties of Copper Severely Deformed by Accumulative Roll-Bonding2011
- Author(s)
  T.Kunimine, T.Fujii, S.Onaka, N.Tsuji, M.Kato
- Journal Title
  
  Journal of Materials Science
  
  Volume: (In press)
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102006
[Journal Article] Low-Cycle Fatigue of Ultrafine-Grained Aluminum at Low Temperatures2011
- Author(s)
  Y.Nakanishi, T.Fujii, S.Onaka, M.Kato
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 52 Issue: 5 Pages: 890-894
- DOI
  10.2320/matertrans.L-MZ201103
- NAID
  130004454734
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102006, KAKENHI-PROJECT-22560690
[Journal Article] Shape and Elastic State of Nano-Sized AgPrecipitates in a Cu-Ag Single Crystal2011
- Author(s)
  T. Miyazawa, T. Fujii, S. Onaka and M. Kato
- Journal Title
  
  Journal of Materials Science
  
  Volume: 46[12] Pages: 4228-4235
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560690
[Journal Article] Inverse Temperature Dependence of Activation Volume in Ultrafine-Grained Copper Processed by Accumulative Roll-Bonding2011
- Author(s)
  T.Kunimine, T.Aragaki, T.Fujii, S.Onaka, M.Kato
- Journal Title
  
  Journal of Materials Science
  
  Volume: (In press)
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102006
[Journal Article] Low-Cycle Fatigue of Ultrafine-grained Aluminum at Low Temperatures2011
- Author(s)
  Y.Nakanishi, T.Fujii, S.Onaka, M.Kato
- Journal Title
  
  Materials Transactions
  
  Volume: (In press)
- NAID
  10028251692
- Peer Reviewed
- Data Source
  KAKENHI-PLANNED-22102006
[Journal Article] Cyclic Softening of Cu-Ni-Si Alloy Single Crystals under Low-Cycle Fatigue2010
- Author(s)
  T.Fujii, H.Kamio, Y.Sugisawa, S.Onaka, M.Kato
- Journal Title
  
  Materials Science Forum
  
  Volume: 654-656 Pages: 1287-1290
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560690
[Journal Article] Cyclic Softening of Cu-Ni-Si Alloy Single Crystals under Low-Cycle Fatigue2010
- Author(s)
  T. Fujii, H. Kamio, Y. Sugisawa, S. Onaka and M. Kato
- Journal Title
  
  Materials Science Forum
  
  Volume: 2010 Pages: 1287-1290
- DOI
  10.4028/www.scientific.net/msf.654-656.1287
- Year and Date
  2010-06-30
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560690
[Journal Article] Cyclic Softening of Cu-Ni-Si Alloy Single Crystals under Low-Cycle Fatigue2010
- Author(s)
  T. Fujii, H. Kamio, Y. Sugisawa, S. Onaka, M. Kato
- Journal Title
  
  Materials Science Forum (掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560697
[Journal Article] Shape evolution of fcc Co-Fe precipitate particles during coarsening in a Cu matrix2010
- Author(s)
  C. Kanno, K. Aoyagi, T. Fujii, M. Kato
- Journal Title
  
  Philosophical Magazine Letters (印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560697
[Journal Article] Effects of magnetic field on solid solubility of Fe and Co in a Cu matrix; Proceedings of the 6th International Conference on Electromagnetic Processing of Materials2009
- Author(s)
  C. Kanno, T. Fujii, H. Ohtsuka, S. Onaka, M. Kato
- Journal Title
  
  Dresden Germany
  
  Pages: 777-779
- Data Source
  KAKENHI-PROJECT-19560697
[Journal Article] Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding2009
- Author(s)
  T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato, S. Onaka
- Journal Title
  
  Mater.Trans. 50
  
  Pages: 64-69
- NAID
  10024810720
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062006
[Journal Article] Thermally Activated Dislocation Depinning at a Grain Boundary in Nanocrystalline and Ultrafine-grained Materials2009
- Author(s)
  M. Kato
- Journal Title
  
  Mat. Sci. Eng. A (印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing2009
- Author(s)
  Y. Furukawa, T. Fujii, S. Onaka, M. Kato
- Journal Title
  
  Mater.Trans. 50
  
  Pages: 70-75
- NAID
  10024810752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062006
[Journal Article] Thermally Activated Dislocation Depinning at a Grain Boundary in Nanocrystalline and Ultrafine-grained Materials2009
- Author(s)
  M. Kato
- Journal Title
  
  Materials Science and Engineering A (accepted)(印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing2009
- Author(s)
  Y. Furukawa, T. Fujii, S. Onaka and M. Kato
- Journal Title
  
  Materials Transactions 50
  
  Pages: 70-75
- NAID
  10024810752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] Effects of magnetic field on variant selection of bcc Fe-Co particles in a Cu matrix; Proceedings of the 6th International Conference on Electromagnetic Processing of Materials2009
- Author(s)
  R. Shima, C. Kanno, T. Fujii, Hideyuki Ohtsuka, S. Onaka, M. Kato
- Journal Title
  
  Dresden, Germany
  
  Pages: 769-772
- Data Source
  KAKENHI-PROJECT-19560697
[Journal Article] Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding2009
- Author(s)
  T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato and S. Onaka
- Journal Title
  
  Mater. Trans. 50
  
  Pages: 64-69
- NAID
  10024810720
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing2009
- Author(s)
  Y. Furukawa, T. Fujii, S. Onaka and M. Kato
- Journal Title
  
  Mater. Trans. 50
  
  Pages: 70-75
- NAID
  10024810752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] Thermally activated dislocation depinning at a grain boundary in nanocrystalline and ultrafine-grained materials2009
- Author(s)
  M. Kato
- Journal Title
  
  Materials Science and Engineering A 516
  
  Pages: 276-282
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062006
[Journal Article] Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Conner by Accumulative Roll Bondine2009
- Author(s)
  T. Kunimine, N. Takata, N. Tsuji, T. Fuiii, M. Kato and S. Onaka
- Journal Title
  
  Materials Transactions 50
  
  Pages: 164-69
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] Effects of magnetic field on shape evolution of Fe-Co particles in a Cu matrix2009
- Author(s)
  C. Kanno, T. Fujii, H. Ohtsuka, S. Onaka, M. Kato
- Journal Title
  
  Philosophical Magazine 89
  
  Pages: 747-759
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560697
[Journal Article] A Dislocation Bow-Out Model for Yield Stress of Ultra-Fine Grained Crystals2008
- Author(s)
  M. Kato, T. Fujii and S. Onaka
- Journal Title
  
  Materials Transactions 49
  
  Pages: 1278-1283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] A Dislocation Bow-Out Model for Yield Stress of Ultra-Fine Grained Crystals2008
- Author(s)
  M. Kato, T. Fujii and S. Onaka
- Journal Title
  
  Mater. Trans. 49
  
  Pages: 1278-1283
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062002
[Journal Article] A Dislocation Bow-Out Model for Yield Stress of Ultra-Fine Grained Crystals2008
- Author(s)
  M. Kato, T. Fujii, S. Onaka
- Journal Title
  
  Mater.Trans. 49
  
  Pages: 1278-1283
- Data Source
  KAKENHI-PROJECT-18062006
[Journal Article] Effects of grain-boundary sliding and plastic deformation of grains on the formation of grain-boundary cracks in a double cylindrical bicrystal of a Cu-SiO_2 alloy2007
- Author(s)
  Masakazu Seki, Mitsuru Fujimoto, Toshiyuki Fujii, Masaharu Kato and Susumu Onaka
- Journal Title
  
  Materials Transactions 48
  
  Pages: 1412-1416
- NAID
  10019486714
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560697
[Journal Article] Effect of grain-boundary GeO_2 particles on intergranular fracture of Cu-GeO_2 polycrystals2003
- Author(s)
  H.SATO, T.FUJII, S.ONAKA, M.KATO
- Journal Title
  
  Journal of Materials Science 38
  
  Pages: 1689-1693
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-12305044
[Journal Article] Temperature dependence of cyclic creep behavior of a Cu-SiO_2 bicrystal with a [0 1 1] 20°twist boundary2003
- Author(s)
  Hiromi Miura, Taku Sakai, Masaharu Kato
- Journal Title
  
  Acta Materialia 51
  
  Pages: 6163-6168
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-12305044
[Journal Article] Effects of grain-boundary sliding and plastic deformation of grains on the formation of grain-boundary cracks in a double cylindrical bicrystal of a Cu-SiO_2 alloy
- Author(s)
  M.Seki, M.Fujimoto, T.Fujii, M.Kato, S.Onaka
- Journal Title
  
  Materials Transactions(JIM) (In press)
- NAID
  10019486714
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560607
[Journal Article] Effects of Grain-Boundary Sliding and Plastic Deformation of Grains on the Formation of Grain-Boundary Cracks in a Double Cylindrical Bicrystal of a Cu-SiO2 Alloy
- Author(s)
  M.Seki, M.Fujimoto, T.Fujii, M.Kato, S.Onaka
- Journal Title
  
  Materials Transactions, JIM (印刷中)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560607
[Presentation] 金属強度学の基礎と今後の展望2014
- Author(s)
  加藤雅治
- Organizer
  第６回構造材料学談話会
- Place of Presentation
  鹿児島大学　郡元キャンパス
- Year and Date
  2014-10-01
- Invited
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] A dislocation model for deformation of ultrafine-grained crystals: effect of grain size, temperature and strain rate2013
- Author(s)
  M. Kato
- Organizer
  International Symposium on Strength of Fine Grained Materials - 60 years of Hall-Petch
- Place of Presentation
  Tokyo, Japan
- Invited
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Cu-Ni-Si合金の熱処理と巨大ひずみ加工による高強度化2013
- Author(s)
  藤貴大、尾中晋、加藤雅治、藤居俊之
- Organizer
  日本銅学会第53回講演大会
- Place of Presentation
  関西大学
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] A dislocation model for deformation of ultrafine-grained crystals: effect of grain size, temperature and strain rate2013
- Author(s)
  M. Kato
- Organizer
  International Symposium on Strength of Fine Grained Materials - 60 years of Hall-Petch
- Place of Presentation
  東京大学
- Invited
- Data Source
  KAKENHI-ORGANIZER-22102001
[Presentation] 超微細粒Cu-Co-Si合金の焼鈍による組織と力学特性の変化2013
- Author(s)
  宮本翔、尾中晋、加藤雅治、藤居俊之
- Organizer
  日本銅学会第53回講演大会
- Place of Presentation
  関西大学
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Co-Fe粒子を分散させた超微細粒Cu合金の熱的安定性2013
- Author(s)
  藤居俊之,宮本翔,宮嶋陽司,尾中晋,加藤雅治
- Organizer
  産学新日鐵住金シンポジウム(招待講演)
- Place of Presentation
  新日鐵住金富津研究所(千葉県)
- Year and Date
  2013-03-08
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] 引張変形およびクリープ変形による超微細粒Cuの結晶粒径変化2013
- Author(s)
  大久保智、宮嶋陽司、藤居俊之、尾中晋、加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  金沢大学　門間キャンパス
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] BCCCo-Fe粒子が分散したCu合金における超微細粒組織の熱的安定性2012
- Author(s)
  宮本翔,宮嶋陽司,藤居俊之,尾中晋,加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛大学(愛媛県)
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] BCC Co-Fe粒子が分散したCu合金における超微細粒組織の熱的安定性2012
- Author(s)
  宮本翔，宮嶋陽司，藤居俊之，尾中晋，加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛大学(愛媛県)
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] 析出強化型Cu-Ni-Si合金単結晶の繰り返し変形に伴う軟化2011
- Author(s)
  藤居俊之,神尾浩史,尾中晋,加藤雅治
- Organizer
  第51回銅及び銅合金技術研究会講演大会
- Place of Presentation
  京都テルサ(京都府)
- Year and Date
  2011-11-14
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] 析出強化型Cu-Ni-Si合金単結晶の繰り返し変形に伴う軟化2011
- Author(s)
  藤居俊之, 神尾浩史, 尾中晋, 加藤雅治
- Organizer
  第51回銅及び銅合金技術研究会講演大会
- Place of Presentation
  京都テルサ
- Year and Date
  2011-11-14
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] 繰り返し重ね接合圧延により作製されるCu/Al合金積層材の組織2011
- Author(s)
  山田拓矢、宮嶋陽司、藤居俊之、尾中晋、加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  沖縄コンベンションセンターおよびカルチャーリゾートフェストーネ
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Cu母相中に析出した非整合Co粒子における予測される平衡形状からのずれ2011
- Author(s)
  宮澤知孝、小澤雄太、宮嶋陽司、藤居俊之、尾中晋、加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  沖縄コンベンションセンターおよびカルチャーリゾートフェストーネ
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] 転位論による材料強化機構と塑性変形の理解2011
- Author(s)
  加藤雅治
- Organizer
  第2回構造材料国際クラスターシンポジウム
- Place of Presentation
  物質・材料研究機構(招待講演)
- Year and Date
  2011-11-22
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] ECAP加工したCu-Co-Fe合金における超微細粒組織の熱的安定性2011
- Author(s)
  藤居俊之、住谷貴子、佐藤尚、渡辺義見、尾中晋、加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  沖縄コンベンションセンターおよびカルチャーリゾートフェストーネ
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Cu母相中に析出した非整合Co粒子における予測される平衡形状からのずれ2011
- Author(s)
  宮澤知孝, 小澤雄太, 宮嶋陽司, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  日本金属学会
- Place of Presentation
  沖縄コンベンションセンター(沖縄)
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-22560657
[Presentation] Suppression of grain growth by precipitation of Co-Fe particles during aging of an ECAPed Cu alloy2010
- Author(s)
  T.Sumiya, T.Fujii, H.Sato, Y.Watanabe, S.Onaka, M.Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
- Place of Presentation
  博多, 西新プラザ
- Year and Date
  2010-11-20
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] ECAP加工を施した純Cuの疲労挙動に及ぼす焼鈍の影響2010
- Author(s)
  大久保智, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  北海道大学
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Suppression of Grain Growth by Precipitation of Co-Fe Particles during Aging of an ECAPed Cu Alloy;2010
- Author(s)
  T. Sumiya, T. Fujii, H. Sato, Y. Watanabe, S. Onaka and M. Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
- Place of Presentation
  Fukuoka,Japan
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] Ni_2Si析出粒子を含むCu合金単結晶の繰り返し変形挙動2010
- Author(s)
  藤居俊之,神尾浩史,尾中晋,加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  北海道大学(北海道)
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] Formation of Dislocation Structure during Cyclic Deformation of Ultrafine-Grained Aluminum at Low Temperatures;2010
- Author(s)
  Y. Nakanishi, T. Fujii, S. Onaka and M. Kato
- Organizer
  Proceedings of the 12th International Conference on Aluminium Alloys
- Place of Presentation
  Yokohama,Japan
- Year and Date
  2010-09-07
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] ARB加工によるCu/Al積層材の強度と組織の変化2010
- Author(s)
  山田拓也, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  北海道大学
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Shape and elastic state of nano-sized Ag precipitates in a Cu-Ag single crystal2010
- Author(s)
  T.Miyazawa,T.Fujii,S.Onaka andM.Kato
- Organizer
  International Conference on Intergranular andInterphase Boundaries and Materials 2010 (iib2010)
- Place of Presentation
  Mie,Japan
- Data Source
  KAKENHI-PROJECT-22560657
[Presentation] Shape Transitions of Ag Precipitates during Aging in Cu-Ag Single Crystals2010
- Author(s)
  T. Miyazawa, T. Fujii, S. Onaka, M. Kato
- Organizer
  ISPlasma2010, 2nd International Symposium on Advanced Plasma Science and its Applications
- Place of Presentation
  名古屋, 名城大学
- Year and Date
  2010-03-07
- Data Source
  KAKENHI-PROJECT-19560690
[Presentation] Ni_2Si析出粒子を含むCu合金単結晶の繰り返し変形挙動2010
- Author(s)
  藤居俊之, 神尾浩史, 尾中晋, 加藤雅治
- Organizer
  日本金属学会
- Place of Presentation
  北海道大学
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] Role of Dislocations Emitted from Grain Boundaries on Plastic Deformation of Ultrafine-Grained Materials2010
- Author(s)
  M.Kato
- Organizer
  The 13th International Conference on Intergranular and Interphase Boundaries in Materials (iib2010)
- Place of Presentation
  Mie, Japan(Invited Lecture)
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] 溶体化処理後連続時効によりCu母相内に析出したCo粒子の形状2009
- Author(s)
  小澤雄太, 宮澤知孝, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  日本金属学会, 第145回秋季大会
- Place of Presentation
  京都, 京都大学
- Year and Date
  2009-09-15
- Data Source
  KAKENHI-PROJECT-19560690
[Presentation] Cu母相におけるCo-Fe粒子の成長に伴う形状変化2009
- Author(s)
  青柳憲司, 菅野千晴, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  日本金属学会秋期(第145回)大会
- Place of Presentation
  京都大学
- Year and Date
  2009-09-15
- Data Source
  KAKENHI-PROJECT-19560697
[Presentation] 尾中晋, Cu-Ag合金単結晶に孤立析出したAg粒子の時効による形状変化2009
- Author(s)
  宮澤知孝, 加藤雅治, 藤居俊之
- Organizer
  日本金属学会, 第14 5回秋季大会
- Place of Presentation
  京都, 京都大学
- Year and Date
  2009-09-15
- Data Source
  KAKENHI-PROJECT-19560690
[Presentation] Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding2008
- Author(s)
  T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato and S. Onaka
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed, Copper by Accumulative Roll Bonding2008
- Author(s)
  T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato and S. Onaka
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing2008
- Author(s)
  Y. Furukawa, T. Fujii, S. Onaka and M. Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing2008
- Author(s)
  Y. Furukawa, T. Fujii, S. Onaka and M. KatoCyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2048)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding2008
- Author(s)
  T. Kunimine, N. Takata, N. Tsuji, T. Fujii, M. Kato, S. Onaka
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan.
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062006
[Presentation] Thermal Activation Process during Dislocation Bow Out at a Grain Boundary in Nanocrystals and Ultra-fine-Grained Materials2008
- Author(s)
  M. Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008),
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2008-11-12
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Cu-Co-Si合金の時効組織と強度2008
- Author(s)
  高柳哲志, 谷口佳, 深町一彦, 江良尚彦, 桑垣寛, 尾中晋, 加藤雅治, 藤居俊之
- Organizer
  日本金属学会秋期(第143回)大会
- Place of Presentation
  熊本大学
- Year and Date
  2008-09-24
- Data Source
  KAKENHI-PROJECT-19560697
[Presentation] Thermal Activation Process during Dislocation Bow Out at a Grain Boundary in Nanocrystals and Ultra-fine-Grained Materials2008
- Author(s)
  M. Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan.
- Year and Date
  2008-11-22
- Data Source
  KAKENHI-PROJECT-18062006
[Presentation] Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing2008
- Author(s)
  Y. Furukawa, T. Fujii, S. Onaka, M. Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan.
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-18062006
[Presentation] Thermal Activation Process during Dislocation Bow Out at a Grain Boundary in Nanocrystals and Ultra-fine-Grained Materials2008
- Author(s)
  M. Kato
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2008-11-22
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Cu-Si合金のARB材における高強度の発現と焼鈍によるその消失2007
- Author(s)
  國峯崇裕, 古川洋嗣, 藤居俊之, 尾中晋, 加藤雅治、高田尚記、辻伸泰
- Organizer
  日本金属学会秋季大会(超微細粒材料)
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-21
- Data Source
  KAKENHI-PROJECT-18062002
[Presentation] Cu母相中に析出するFe-Co粒子の外部磁場による形状変化2007
- Author(s)
  菅野千晴, 大塚秀幸, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  第141回日本金属学会秋期講演大会
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-21
- Data Source
  KAKENHI-PROJECT-19560697
[Presentation] Cu-Cr-Si合金の加工熱処理による組織と強度の変化2007
- Author(s)
  高柳哲志, 深町一彦, 江良尚彦, 冠和樹, 桑垣寛, 藤居俊之, 尾中晋, 加藤雅治
- Organizer
  第47回銅及び銅合金技術研究会講演大会
- Place of Presentation
  関西大学
- Year and Date
  2007-11-15
- Data Source
  KAKENHI-PROJECT-19560697
[Presentation] Fe 析出粒子を含むCu 合金の巨大ひずみ加工による組織変化
- Author(s)
  齋藤実奈子，宮嶋陽司，宮澤知孝，藤居俊之，加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  名古屋大学　東山キャンパス
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] Co-Fe粒子を分散させた超微細粒Cu合金の熱的安定性
- Author(s)
  藤居俊之，宮本翔，宮嶋陽司，尾中晋，加藤雅治
- Organizer
  産学新日鐵住金シンポジウム
- Place of Presentation
  新日鐵住金富津研究所(千葉県)
- Invited
- Data Source
  KAKENHI-PROJECT-22560690
[Presentation] UFG-Ni の焼鈍に伴うビッカース硬さおよび蓄積エネルギーの変化と組織の関係
- Author(s)
  宮嶋陽司，上田太郎，足立大樹，藤居俊之，尾中晋，加藤雅
- Organizer
  日本金属学会秋季講演大会
- Place of Presentation
  名古屋大学
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-ORGANIZER-22102001
[Presentation] 超微細粒Cu における引張変形中の転位密度変化
- Author(s)
  大久保智，宮澤知孝，宮嶋陽司，足立大樹，藤居俊之，尾中晋，加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  名古屋大学　東山キャンパス
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] 析出粒子を含む銅合金における超微細粒組織の熱的安定性
- Author(s)
  藤居俊之，宮本翔，宮嶋陽司，加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  名古屋大学
- Year and Date
  2014-09-24 – 2014-09-26
- Invited
- Data Source
  KAKENHI-PLANNED-22102006
[Presentation] UFG-Ni の焼鈍に伴うビッカース硬さおよび蓄積エネルギーの変化と組織の関係
- Author(s)
  宮嶋陽司，上田太郎，足立大樹，藤居俊之，尾中晋，加藤雅治
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  名古屋大学　東山キャンパス
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PLANNED-22102006

1. ONAKA Susumu (40194576)

# of Collaborated Projects: 13 results

# of Collaborated Products: 58 results
2. FUJII Toshiyuki (40251665)

# of Collaborated Projects: 11 results

# of Collaborated Products: 50 results
3. KAJIHARA Masanori (10161035)

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
4. HORIE Shiro (90114892)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
5. MISHIMA Yoshinao (00143660)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. MORI Tsutomu (40016259)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
7. TOMOTA Yo (90007782)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. TSUJI Nobuhiro (30263213)

# of Collaborated Projects: 2 results

# of Collaborated Products: 6 results
9. HORITA Zenji (20173643)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. KUMAI Shinji (00178055)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. SATO Akikazu (20089824)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. 三浦誠司 (50199949)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. HIGASHIDA Kenji (70156561)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. OHASHI Tetsuya (80312445)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. NAKATANI Akihiro (50252606)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. MORINAGA Masahiko (50126950)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. KOHYAMA Masanori (60344157)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. OGATA Narinobu (20273584)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. SHIMOKAWA Tomotsugu (40361977)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. YANAGIMOTO Jun (90220194)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. TANAKA Masaki (40452809)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. KAMIKAWA Naoya (30530894)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. KANEKO Yoshihisa (40283098)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. MIYAJIMA Yoji (80506254)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
25. KIMURA Yoshisato (90262295)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. TANAKA Ryohei (80016188)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. YOSHIHARA Michiko (70111705)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. WADA Minoru (20108236)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 毛利哲夫 (20182157)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. ビノグラドフアレクセイ (10283102)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. VINOGRADOV Alexei

# of Collaborated Projects: 0 results

# of Collaborated Products: 7 results

KATO Masaharu 加藤 雅治

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Mechanical Properties and Deformation Mechanisms of Bulk Nanostructured MetalsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Mechanics of high-density lattice defect materialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Construction of Dislocation Structure Diagrams for Life Assessment of MaterialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

KATO Masaharu 加藤雅治