SONODA Keiji 園田計二

Researcher Number	50163142
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2003 – 2005: 崇城大学, 工学部, 教授 2000: Sojo University, Depatment of Mechanical Engineering, Associate Professor, 工学部, 助教授 1997 – 1999: 熊本工業大学, 工学部, 助教授 1996: 佐賀大学, 理工学部, 助教授 1992 – 1994: 佐賀大学, 理工学部, 助手 1986 – 1987: 佐賀大学, 理工学部, 助手
Review Section/Research Field	Principal Investigator 設計工学・機械要素・トライボロジー / Design engineering/Machine functional elements/Tribology Except Principal Investigator 機械要素 / 設計工学・機械要素・トライボロジー / 機械工作・生産工学
Keywords	Principal Investigator Friction coefficient / 摩擦係数 / トライボロジー / Effective reuse / Surface failure / Cutting oil / Gear oil / Lubricants / Used engine-oil / Tribology … More / 面圧強度 / 摩擦摩耗 / エンジン廃油 / 自動車エンジンオイル / 有効利用 / 表面損傷 / 切削加工油 / 歯車潤滑油 / 潤滑油 / 自動車エンジン廃油 / High reduction ratio / Efficiency / Power transmission / Planetary gear / Gear drive / Gear / Machine elements / ロボット / 偏芯歯車 / 高減速 / 高効率 / 動力伝達効率 / 運転性能 / 遊星歯車機構 / 歯車減速機 / 高減速比 / 効率 / 動力伝達 / 遊星歯車 / 歯車装置 / 歯車 / 機械要素 / 超精密鏡面仕上 / トラクション特性 / 高清浄鋼 / チタン合金 / 難窒化材 / 表面硬化 / イオン窒化処理 / 表面改質 / 鏡面仕上げ / 高清浄度 / 砥粒 / 精度 / 面圧強さ / 表面粗さ / 超精密加工 … More Except Principal Investigator 歯車 / Gear noise / Internal gear / Gear / トラクションドライブ / 内歯車 / 動力伝達効率 / Power transmission efficiency / Friction Coefficient / Friction Drive / Traction Drive / トラクション係数 / 潤滑油 / 機械騒音 / 減速機 / 摩擦係数 / Load carrying capacity / Impact fatigue strength / Carburizing / Case-hardening / Nitriding / Plasma nitriding / Gears / Machine elements / ダクタイル鋳鉄 / 表面硬化 / 高張力鋼 / 衝撃強度 / 浸炭 / 窒化鋼 / 衝撃疲労強度 / 疲労強度 / 衝撃曲げ強度 / 曲げ強度 / 熱処理 / プラズマ窒化 / 負荷能力 / Efficiency / Traction drive / Gear grinder / Planetary gear / Machine element / 効率 / 振動 / 騒音 / 歯車研削盤 / 遊星歯車 / 減速歯車 / 不思議歯車機構 / 差動遊星歯車 / ウォームギヤ / セルフロッキング / 精密割出し Less

Studies on Effective Reuse of Used Engine-oils from Automotives as for Gear Lubricants and Gear Cutting oilsPrincipal Investigator
- Principal Investigator
  
  SONODA Keiji
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Sojo University
Improvement of Load-Carrying Capacity of Gears Case-Hardened by Plasma Nitriding
- Principal Investigator
  
  ISHIBASHI Akira
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Sojo University
Studies on Performance of Gear Drives with High Reduction Ratio for RobotPrincipal Investigator
- Principal Investigator
  
  SONODA Keiji
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Kumamoto Institute of Technology
外転遊星歯車を用いる超精密連続割出し装置
- Principal Investigator
  
  ISHIBASHI Akira
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Saga University
イオン窒化した接触面の面圧強度とトラクション特性に関する研究Principal Investigator
- Principal Investigator
  
  園田計二
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Saga University
高清浄・高硬度鋼の超精密表面仕上げと面圧強度に関する研究Principal Investigator
- Principal Investigator
  
  園田計二
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Saga University
Studies on Precision Grinding of Internal Gears and Internal Speed Changers
- Principal Investigator
  
  ISHIBASHI Akira
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械要素
- Research Institution
  Saga University
Developmental Investigation into Low-Noise High-Performance Hybrid Reducers Consisting of Gear and Traction Drives
- Principal Investigator
  
  ISHIBASHI Akira
- Project Period (FY)
  1985 – 1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械要素
- Research Institution
  Saga University

All 2004 2003

All Journal Article

[Journal Article] Design and Manufacture of Gear Load Testing Machine Capable of Applying Heavy Tooth Load during Rotation of Test Gear and Experimental Results (1st Report)2004
- Author(s)
  Akira ISHIBASHI, Yuki SUNAGAWA, Keiji SONODA
- Journal Title
  
  Journal of Japan Society for Design Engineering Vol.39,No.10
  
  Pages: 30-37
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine Oils as Gear-Cutting Oil2004
- Author(s)
  石橋彰, 砂川裕紀, 園田計二, 江副覚
- Journal Title
  
  Transactions of the Society of Tribology and Lubrication Engineers Vol.47
  
  Pages: 272-279
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine Oils as Gear-Cutting Oil2004
- Author(s)
  石橋彰, 砂川裕紀, 園田計二, 江副覚
- Journal Title
  
  Transactions of the Society of Tribology and Lubrication Engineers Vol. 47
  
  Pages: 272-279
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Surface Durability of Steel Rollers Lubricated by Fresh and Used Engine Oils Comparison with Gear Oil2004
- Author(s)
  石橋彰, 園田計二, 砂川裕紀, 庄司亨
- Journal Title
  
  International Journal of Applied Mechanics and Engineering Vol. 9
  
  Pages: 79-85
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] 歯車の回転中に負荷のできる重荷重用歯車負荷試験機の設計製作と試験結果(第1報 : 試験機の設計製作および平歯車・はすば歯車の騒音と負荷能力)2004
- Author(s)
  石橋彰, 砂川裕紀, 園田計二
- Journal Title
  
  日本設計工学会誌 Vol. 39 No. 10
  
  Pages: 30-37
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Surface Durability of Steel Rollers Lubricated by Fresh and Used Engine Oils Comparison with Gear Oil2004
- Author(s)
  Akira ISHIBASHI, Keiji SONODA, Yuki SUNAGAWA, Ryo SYOJI
- Journal Title
  
  International Journal of Applied Mechanics and Engineering Vol.9
  
  Pages: 79-85
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine-oils in Metal Forming and Metal Cutting2004
- Author(s)
  Keiji SONODA, Yuki SUNAGAWA, Mituaki NARUDOMI, Akira ISHIBASHI
- Journal Title
  
  Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes Vol.1
  
  Pages: 153-161
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine-oil as Gear-Cutting Oil2004
- Author(s)
  Akira ISHIBASHI, Yuki SUNAGAWA, Keiji SONODA, Satoru EZOE
- Journal Title
  
  Transactions of the Society of Tribology and Lubrication Engineers Vol.47
  
  Pages: 272-279
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] ガソリン自動車エンジン廃油のトライボロジー特性に関する研究2004
- Author(s)
  園田計二, 砂川裕紀, 石橋彰, 原康大, 江副覚
- Journal Title
  
  宗城大学大学部研究報告 Vol. 29 No. 1
  
  Pages: 63-72
- NAID
  110004323007
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine-oils in Metal Forming and Metal Cutting2004
- Author(s)
  園田計二, 砂川裕紀, 成富光昭, 石橋彰
- Journal Title
  
  Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes Vol.1
  
  Pages: 153-161
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Surface Durability of Steel Rollers Lubricated by Fresh and Used Engine Oils Comparison with Gear Oil2004
- Author(s)
  石橋彰, 園田計二, 砂川裕紀, 庄司亨
- Journal Title
  
  International Journal of Applied Mechanics and Engineering Vol.9
  
  Pages: 79-85
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] ガソリン自動車エンジン廃油のトライボロジー特性に関する研究2004
- Author(s)
  園田計二, 砂川裕紀, 石橋彰, 原康大, 江副覚
- Journal Title
  
  崇城大学工学部研究報告 Vol.29 No.1
  
  Pages: 63-72
- NAID
  110004323007
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Studies on Tribological Characteristics of Used Engine-Oil from Automotives with Gasoline-Engine2004
- Author(s)
  Keiji SONODA, Yuki SUNAGAWA, Akira ISHIBASHI, Yasuhiro HARA, Satoru EZOE
- Journal Title
  
  Bulletin of Sojo University Vol.29,No.1
  
  Pages: 63-72
- NAID
  110004323007
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] 歯車の回転中に負荷のできる重荷重用歯車負荷試験機の設計製作と試験結果(第1報:試験機の設計製作および平歯車・はすば歯車の騒音と負荷能力)2004
- Author(s)
  石橋彰, 砂川裕紀, 園田計二
- Journal Title
  
  日本設計工学会誌 Vol.39 No.10
  
  Pages: 30-37
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine-oils in Metal Forming and Metal Cutting2004
- Author(s)
  園田計二, 砂川裕紀, 成富光昭, 石橋彰
- Journal Title
  
  Proceedings of the 2nd International Conference on Tribology in Manufacturing Processes Vol. 1
  
  Pages: 153-161
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine-Oil as Metal Cutting Fluid2003
- Author(s)
  Akira ISHIBASHI, Yuki SUNAGAWA, Keiji SONODA, Satoru EZOE
- Journal Title
  
  2003 Technical Preprints, STLE 58th Annual Meeting Vol.1
  
  Pages: 468-475
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Tribological Characteristics of Used Engine-Oil in Comparison with Gear Oil and Traction Oil2003
- Author(s)
  園田計二, 石橋彰, 原康大, 砂川裕紀, 江副覚
- Journal Title
  
  2003 Technical Preprints, STLE 58th Annual Meeting, April 28-May 1, 2003 Vol. 1
  
  Pages: 866-873
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Performance of Used Engine-oil as Metal Cutting Fluid2003
- Author(s)
  石橋彰, 砂川裕紀, 園田計二, 江副覚
- Journal Title
  
  2003 Technical Preprints, STLE 58th Annual Meeting, April 28-May 1, 2003 Vol. 1
  
  Pages: 468-475
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360088
[Journal Article] Tribological Characteristics of Used Engine-Oil in Comparison with Gear Oil and Traction Oil2003
- Author(s)
  Keiji SONODA, Akira ISHIBASHI, Yasuhiro HARA, Yuki SUNAGAWA, Satoru EZOE
- Journal Title
  
  2003 Technical Preprints, STLE 58th Annual Meeting Vol.1
  
  Pages: 866-873
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360088

1. ISHIBASHI Akira (80037720)

# of Collaborated Projects: 5 results

# of Collaborated Products: 19 results
2. EZOE Satoru (30039292)

# of Collaborated Projects: 2 results

# of Collaborated Products: 10 results
3. HOYASHITA Shigeru (70109221)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. NAKAJIMA Akira (60039295)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SONODA Keiji 園田 計二

Research Projects

Research Products

Co-Researchers

Studies on Effective Reuse of Used Engine-oils from Automotives as for Gear Lubricants and Gear Cutting oilsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Improvement of Load-Carrying Capacity of Gears Case-Hardened by Plasma Nitriding

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Studies on Performance of Gear Drives with High Reduction Ratio for RobotPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

外転遊星歯車を用いる超精密連続割出し装置

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

イオン窒化した接触面の面圧強度とトラクション特性に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

高清浄・高硬度鋼の超精密表面仕上げと面圧強度に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Studies on Precision Grinding of Internal Gears and Internal Speed Changers

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Developmental Investigation into Low-Noise High-Performance Hybrid Reducers Consisting of Gear and Traction Drives

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Design and Manufacture of Gear Load Testing Machine Capable of Applying Heavy Tooth Load during Rotation of Test Gear and Experimental Results (1st Report)2004

Author(s)

Journal Title

Description

Data Source

[Journal Article] Performance of Used Engine Oils as Gear-Cutting Oil2004

Author(s)

Journal Title

Data Source

[Journal Article] Performance of Used Engine Oils as Gear-Cutting Oil2004

Author(s)

Journal Title

Description

Data Source

[Journal Article] Surface Durability of Steel Rollers Lubricated by Fresh and Used Engine Oils Comparison with Gear Oil2004

Author(s)

Journal Title

Description

Data Source

[Journal Article] 歯車の回転中に負荷のできる重荷重用歯車負荷試験機の設計製作と試験結果(第1報 : 試験機の設計製作および平歯車・はすば歯車の騒音と負荷能力)2004

Author(s)

Journal Title

Description

Data Source

[Journal Article] Surface Durability of Steel Rollers Lubricated by Fresh and Used Engine Oils Comparison with Gear Oil2004

Author(s)

Journal Title

Description

SONODA Keiji 園田計二