• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Murakawa Hidekazu  村川 英一

ORCIDConnect your ORCID iD *help
… Alternative Names

村川 英一  ムラカワ ヒデカズ

MURAKAWA Hidekazu  村川 英一

村川 榮一  ムラカワ エイイチ

Less
Researcher Number 60166270
Other IDs
External Links
Affiliation (Current) 2025: 大阪大学, 接合科学研究所, 招へい教授
Affiliation (based on the past Project Information) *help 2024: 大阪大学, 接合科学研究所, 招へい教授
2019 – 2021: 大阪大学, 接合科学研究所, 招へい教授
2016 – 2017: 大阪大学, 接合科学研究所, 招へい教授
2012 – 2016: 大阪大学, 接合科学研究所, 教授
2001 – 2008: Osaka Univ., J. W. R. I., Professor, 接合科学研究所, 教授 … More
2001: Joining and Welding Research Institute, Professor, 大学院・工学研究科, 教授
1996 – 2001: Osaka University, INSTITUTION OF WELDING ASSOCIATE PROFESSOR, 接合科学研究所, 助教授
1998: 大阪大学, 接合化学研究所, 助教授
1987 – 1996: 大阪大学, 溶接工学研究所, 助教授
1991: Osaka Univ., Welding Research Inst., Assoc. Prof., 容接工学研究所, 助教授
1989: 大阪大学, 熔接工学研究所, 助教授
1986: Osaka University, Research Instructor, 溶接工学研究所, 助手 Less
Review Section/Research Field
Principal Investigator
Naval and maritime engineering / 船舶工学 / 船舶構造・建造 / Material processing/treatments / 溶接工学 / Material processing/treatments / 海洋工学
Except Principal Investigator
船舶構造・建造 / 船舶工学 / Basic Section 24020:Marine engineering-related … More / Naval and maritime engineering / Composite materials/Surface and interface engineering / Material processing/treatments / 海洋工学 Less
Keywords
Principal Investigator
有限要素法 / Finite Element Method / 溶接変形 / 界面要素 / 残留応力 / 固有変形 / シミュレーション / 計測 / 溶接組立 / 溶接残留応力 … More / 熱弾塑性解析 / き裂進展 / 固有ひずみ / 溶接組立変形 / 溶接 / 突合せ溶接 / 隅肉溶接 / 大型構造 / X線回折 / 多層溶接 / 造船 / 理論予測 / 試験片サイズ / 可視化 / 大規模計算 / 疲労寿命 / 破壊強度 / 逐次損傷崩壊 / 四次元可視化 / 溶接力学 / 破壊力学 / 生産 / 設計 / 計算科学 / 寿命 / 変形 / 疲労 / 破壊 / 溶接構造物 / CAE / Dimensionless parameter / Fluid force / Strain rate / Plastic deformation / Tubular member / Prediction of damage / Collision / Offshore structure / シェル / 残留強度評価 / 理想化離散モデル / 歪速度依存性 / パイプ / 局所変形 / 損傷 / 無次元パラメ-タ- / 流体力 / 歪速度 / 塑性変形 / 円筒部材 / 損傷予測 / 衝突 / 海洋構造物 / Allowable Gap / Elastic Plastic Large Deformation Problem / Contact Problem / Similarity Rule / Squeezing Deformation / Initial Gap / Spot Welding / 弾塑性 / 相似則 / 力学 / 溶接性 / 臨界曲線 / 加圧力 / 接触面積 / 限界隙間 / 弾塑性大変形問題 / 接触問題 / 相以則 / 加圧変形 / 初期隙間 / スポット溶接 / Parallelization / Nonlinearity / Thermal Elastic Plastic Analysis / Welding Distortion / 逆解析 / 溶接順序 / 並列化 / 非線形性 / Crack Propagation Speed / Dynamic Crack Propagation / Ductile Crack / Delamination / Interface Element / Crack Propagation / Energy Release Rate / 強度評価 / 延性破壊 / シャルピー衝撃試験 / き裂伝播速度 / 動的き裂伝播 / 界面ポテンシャル / 非線形数値破壊力学 / き裂の進展速度 / 動的き裂進展 / 延性き裂 / 剥離 / エネルギー解放率 / shipbuilding / computer aided / welding / bending / cutting / FEM / simulation / precision / 船体構造 / 計算機援用 / 曲げ加工 / 切断 / 工作精度 / Inherent Strain / Residual Stress / Cutting Precision / Cutting Error / Cutting Deformation / Plasma Cutting / Gas Cutting / 過渡変形 / 有限要素性 / 残留応力の影響 / 切断誤差 / 残留変形 / 熱変形 / プラズマ切断 / ガス切断 / Hierarchical Optimization / Learning Algorithm / MonteCarlo Simulation / Large Scale Structure / Significance of Optimization / Damage of Collapse Mode / Optimum Design / Reliability Assessment / 最終強度 / 初期破損 / 信頼性の配分 / 信頼性指標 / 安全率 / 冗長構造物 / 致命度 / 非正規乱数 / 階層的最適化 / 学習的アルゴリズム / モンテカルロシミュレーション / 大規模構造物 / 最適設計の意義 / 崩壊モードの致命度 / 最適設計 / 信頼性評価 / ロッキング / 座屈変形 / 薄板構造 / 建造 / 画像計測 / 理想化構造要素 / 歪取 / 狭開先溶接 / 異材接合 / 最適化 / 延性低下割れ / 梨形ビード割れ / 高温割れ / 複合材料 / 界面強度 / 表面エネルギー / データベース / インターネット / ノウハウ / ナレッジシステム / 熱加工 … More
Except Principal Investigator
残留応力 / 海洋構造物 / 理想化構造要素法 / 疲労強度 / 最終強度 / 溶接変形 / FEM / 線状加熱 / Finite Element Method / 固有歪 / 固有ひずみ / Crack Damage / Offshore Structure / CTOD / CTOA / 亀裂損傷 / Fatigue Strength / Welding Residual Stress / Ultimate Strength / HT係数 / 高張力鋼 / 溶接残留応力 / 理想化陽解法FEM / 船体構造 / 溶接 / 材料加工・処理 / サロゲートモデル / 4次元可視化 / レーザ・アークハイ ブリッド溶接 / 高温割れ / デジタルツイン / 割れ防止技術 / AI / 片面サブマージアーク溶接 / 溶接高温割れ / Reliability analysis / Collision Strength / Corrosion / Deterioration / Joint Strength / 塑性崩壊 / 損傷疲労 / 強度解析 / 信頼性解析 / 衝突強度 / 腐食衰耗 / 経年変化 / 格点部強度 / HT-factor / Idealized Stiffened Plate Element / Corrosion Margin / Welding Initial Imperfection / Effectiveness of High Strength Steel / High Strength Steel / 軟鋼 / 有効初期たわみ係数 / 推定法 / 圧壊強度 / 初期たわみ / 甲板 / 有効性初期たわみ係数 / 補強板 / 上甲板パネル / 溶接初期不整 / 高張力鋼の適用性 / Ultimate strength / Rigidity / Dent / Joint / Pipe structure / Jack-up rig / Offshore structure / 剛性 / デント / 格点部 / 骨組構造物 / ジャッキアップ・リグ / visualization system / real-time computation / distributed computation / large-scale computation / ship / 視覚化システム / 実時間計算 / 分散処理 / 大規模計算 / 船舶 / Impinging jet / L.I.F. measurement / Finite different method / Heat transfer / Manufacturing practice / Line-heating / 有限体積法 / LIF法 / 造船工作法 / 衝突噴流 / L.I.F.法 / 有限差分法 / 熱伝達 / 船体工作法 / Elastoplastic large deformation analysis / Crack initiation strength / Fracture toughness / Mechanical properties / Cyclic compressive strain / Compressive plastic strain / Buckling collapse / Ship hull structure / 3次元弾塑性大変形解析 / 変動荷重 / 非発生の限界歪量 / 亀裂発生 / 繰返し荷重 / 圧縮予歪による靱性劣化 / 座屈損傷 / 亀裂発生・破断強度 / 繰り返し荷重 / 溶接構造部材 / 切欠靱性低下 / V-ノッチシャルピー衝撃試験 / 座屈・塑性崩壊 / 弾塑性大変形解析 / 亀裂強度 / 切欠靱性 / 機械的性質 / 繰り返し圧縮歪 / 圧縮塑性歪 / 座屈崩壊 / 船体構造部材 / Functional Gradation / Materials Hybridization / Heterogeneous Materials Joining / Ceramics Sintering / Functional Materials / Electromagnetic Energy / 傾斜構造化 / 複合化 / 異材接合 / セラミックス焼結 / 機能材料 / 電磁エネルギー / A NEW DESIGN OF MIDSHIP-SECTION / A NEW DESIGN CONCEPT / FEM-ANALYSIS / EASY CONSTRUCTION / SHIP HULL / SLOT CONSTRUCTIONS / 構造設計 / 座屈・最終強度 / 簡易解析法 / 座屈、最終強度 / スロット部 / FEM解折 / 中央横断面の試設計 / 設計法の提言 / FEM解析 / 工作の容易さ / スロット構造 / Heating Condition / Similarity Rule / Angular Deformation / shrinkage / Inherent Deformation / Line-Heating / Plate Bending / 技能の継承 / 技能の技術化 / 面内歪と曲げ歪 / 熱変形 / 相似則 / 線形加算則 / 相互影響 / 加熱条件 / 角変形 / 縮み / 板曲げ / Prediction and Control / Toe of Weld / Fillet Welding / Function Representation / Inherent Strain / 局部加熱 / 塑性歪み / 初期応力 / 会合法 / 横収縮 / 突合せ溶接 / 熱加工 / 予測と制御 / 溶接止端部 / 有限要素法 / 隅肉溶接 / 関数表示 / Idealized Structural Unit / Elastoplastic Analysis / Ductile Crack / Tubular Member / J積分 / 亀裂進展 / 理想化構造要素 / 弾塑性大たわみ解析 / 円筒ブレ-ス材 / 延性亀裂 / DTOD / 耐荷力 / 円筒部材 / Boxing Weld / Welding Deformation / ISUM Rectangular Plate Element / Structural Reliability / Design Permitting Buckling / 信頼性評価 / 座屈強度 / 高品質軽量化船 / かどまきすみ肉 / 理想化矩形板要素 / 構造信頼性 / 座屈許容設計 / 船体ブロック / ルートギャップ / 熱弾塑性解析 / 高速解析 / 大規模解析 / GPGPU / 溶接ポロシティ / 溶接・接合 / 金属 / マイクロポーラス / その場局所 / 制御 / ポロシティ / レーザ / 計算機システム / 制御工学 / モデル化 / シミュレーション工学 / 接合 / 軟着底 / 自航専用ユニット / 渡橋装置 / 災害救助 / 免震構造 / 繁留 / ハイブリッド構造 / 自航型海洋浮体 Less
  • Research Projects

    (30 results)
  • Research Products

    (77 results)
  • Co-Researchers

    (66 People)
  •  Four-Dimensional Visualization of Thermal Processing in Ship Hull Fabrication and Establishment of Crack Prevention Using Digital Twins

    • Principal Investigator
      柴原 正和
    • Project Period (FY)
      2024 – 2026
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 24020:Marine engineering-related
    • Research Institution
      Osaka Metropolitan University
  •  Systematization of analysis for welding hot cracking and establishment of crack prevention method using AI

    • Principal Investigator
      Shibahara Masakazu
    • Project Period (FY)
      2019 – 2021
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 24020:Marine engineering-related
    • Research Institution
      Osaka Prefecture University
  •  Development of 4 Dimensional CAE Visualization System for Assessment of Quality and Safety of Structures through Life Time Starting from ProductionPrincipal Investigator

    • Principal Investigator
      Murakawa Hidekazu
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Naval and maritime engineering
    • Research Institution
      Osaka University
  •  Creation of in-situ-local microporous metal by porosity controlled at the laser-irradiated unit

    • Principal Investigator
      Kawahito Yousuke
    • Project Period (FY)
      2013 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Composite materials/Surface and interface engineering
    • Research Institution
      Osaka University
  •  Development of Precise Prediction System of Welding Deformation for Large-scale Structure Using GPGPU Computing

    • Principal Investigator
      Shibahara Masakazu
    • Project Period (FY)
      2013 – 2015
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Naval and maritime engineering
    • Research Institution
      Osaka Prefecture University
  •  Environment cPrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Naval and maritime engineering
    • Research Institution
      Osaka University
  •  溶接変形・残留応力の理論および実験に基づく予測に関する研究Principal Investigator

    • Principal Investigator
      村川 英一
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for JSPS Fellows
    • Research Field
      Material processing/treatments
    • Research Institution
      Osaka University
  •  Development of Design System for Multi-Joint Interface by Using High-Speed Numerical Method for Ultra-Lager Scale Problems

    • Principal Investigator
      SERIZAWA Hisashi
    • Project Period (FY)
      2006 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Osaka University
  •  界面計算力学の接合加工および強度評価への展開Principal Investigator

    • Principal Investigator
      村川 英一
    • Project Period (FY)
      2003 – 2005
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Naval and maritime engineering
    • Research Institution
      Osaka University
  •  Development of Numerical Estimation Technique for Production of Welded Structure with High AccuracyPrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      2003 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Material processing/treatments
    • Research Institution
      Osaka University
  •  熱加工シミュレーション支援ナレッジシステムの構築Principal Investigator

    • Principal Investigator
      村川 英一
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      船舶工学
    • Research Institution
      Osaka University
  •  Real-time Visualization System for Large-scale Calculation Using Distributed Network

    • Principal Investigator
      HASEGAWA Kazuhiko
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      船舶工学
    • Research Institution
      Osaka University
  •  自航型・ハイブリッド構造による海洋浮体の基本計画に関する企画調査

    • Principal Investigator
      HAYASHI Sigehiro
    • Project Period (FY)
      1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      海洋工学
    • Research Institution
      Osaka University
  •  Study on the Development of Automatc Line-Heating System

    • Principal Investigator
      OSAWA Naoki
    • Project Period (FY)
      1998 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      船舶工学
    • Research Institution
      Osaka University
  •  Development of Nonlinear Numerical Fracture Mechanics Based on Energy Release RatePrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      1997 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      海洋工学
    • Research Institution
      Osaka University
  •  Functional Materials Processing by Electromagnetic Heating

    • Principal Investigator
      MIYAKE Shoji
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for international Scientific Research
    • Research Institution
      Joining and Welding Research Institute
  •  Computer aided precision cotrol in shipbuilding based on simulationPrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu, 上田 幸雄
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      船舶工学
    • Research Institution
      Osaka University
  •  A Study on the crack initiation strength of Ship Hull Structure after Buckling

    • Principal Investigator
      YAJIMA Hiroshi
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      船舶工学
    • Research Institution
      HIROSHIMA UNIVERSITY
  •  A RESEARCH ON THE SROT PARTS OF THE SHIP-HULL UNDER CONSIDERING EASY CONSTRUCTION

    • Principal Investigator
      FUNAKI Toshihiko
    • Project Period (FY)
      1994 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      船舶工学
    • Research Institution
      Osaka University
  •  Prediction of Geometrical Error Due to Gas and Plasma Cuttings and Its ControlPrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      船舶工学
    • Research Institution
      Osaka University
  •  Development of Computer-Aided Process Planning System for Plate Bending

    • Principal Investigator
      UEDA Yukio
    • Project Period (FY)
      1992 – 1994
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University
  •  Development of methods for prediction and control of welding stress and deformation besed on concept of inherent strain as their essential source

    • Principal Investigator
      UEDA Yukio
    • Project Period (FY)
      1991 – 1993
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University
  •  Development of Optimization Method for Redundant Structure Based on Reliability Assessment Considering Damage of Collapse ModePrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University
  •  Effects of Crack Damages on the Structural Response of Offshore Structures

    • Principal Investigator
      YAO Tetsuya
    • Project Period (FY)
      1990 – 1991
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      船舶構造・建造
    • Research Institution
      Hiroshima University
  •  High Quality Light Weight Ship Using Ultra High Tensile Steels

    • Principal Investigator
      UEDA Yukio
    • Project Period (FY)
      1989 – 1991
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University
  •  Mechanical Study on the Effect of Initial Gap upon the Weldability of Various Spot Weld JointsPrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      1988 – 1989
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      溶接工学
    • Research Institution
      Osaka University
  •  Development of a System to Assess the Damage and the Residual Strength of Pipe and Shell Structures under CollisionPrincipal Investigator

    • Principal Investigator
      MURAKAWA Hidekazu
    • Project Period (FY)
      1988 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B).
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University
  •  Integrity and Strength of Offshore Structure Suffered from Deterioration during Service Period

    • Principal Investigator
      UEDA Yukio
    • Project Period (FY)
      1987 – 1989
    • Research Category
      Grant-in-Aid for Co-operative Research (A)
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University
  •  Evaluating System of Applicability of High Strength Steels

    • Principal Investigator
      UEDA Yukio
    • Project Period (FY)
      1985 – 1986
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      船舶構造・建造
    • Research Institution
      Welding Research Institute, Osaka University
  •  Ultimate Strength of Offshore Structures (Mainly Jack-up Rigs)

    • Principal Investigator
      UEDA Yukio
    • Project Period (FY)
      1984 – 1986
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      船舶構造・建造
    • Research Institution
      Osaka University

All 2021 2017 2016 2015 2014 2013 2008 2007 2006 2005 2004 2003 Other

All Journal Article Presentation

  • [Journal Article] Numerical investigation on the effect of thickness and stress level on fatigue crack growth in notched specimens2021

    • Author(s)
      Ramy Gadallah, Hidekazu Murakawa, Kazuki Ikushima, Masakazu Shibahara, Seiichiro Tsutsumi
    • Journal Title

      Theoretical and Applied Fracture Mechanics

      Volume: 116 Pages: 103138-103138

    • DOI

      10.1016/j.tafmec.2021.103138

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02366
  • [Journal Article] Simulation of Welding Residual Stress and Distortion2017

    • Author(s)
      村川英一
    • Journal Title

      JOURNAL OF THE JAPAN WELDING SOCIETY

      Volume: 86 Issue: 8 Pages: 559-569

    • DOI

      10.2207/jjws.86.559

    • NAID

      130006247092

    • ISSN
      0021-4787, 1883-7204
    • Language
      Japanese
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] High performance computation of residual stress and distortion in laser welded 301L stainless sheets2017

    • Author(s)
      Huang, H., Tsutsumi, S., Wang, J., Li, L., Murakawa, H.
    • Journal Title

      Finite Elements in Analysis and Design

      Volume: 135 Pages: 1-10

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Microstructural Characteristics and Mechanical Properties of Friction Stir Welded Thick 5083 Aluminum Alloy2017

    • Author(s)
      Imam, M., Sun, Y., Fujii, H., Tsutsumi, S., Murakawa, H. et al.
    • Journal Title

      Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

      Volume: 48(1) Pages: 208-229

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Friction Stir Welding of Thick Aluminium Welds -Challenges and Perspectives -2017

    • Author(s)
      Imam, M., Sun, Y., Fujii, H., Tsutsumi, S., Murakawa, H. et al.
    • Journal Title

      Minerals, Metals and Materials Series

      Volume: 9783319523828 Pages: 119-124

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method2017

    • Author(s)
      Lin, J., Ma, N., Lei, Y., Murakawa, H.
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 243 Pages: 387-394

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Numerical investigation of formation mechanism of welding residual stress in P92 steel multi-pass joints2017

    • Author(s)
      Li, S., Ren, S., Zhang, Y., Deng, D., Murakawa, H.
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 244 Pages: 240-252

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Elongated bead weld method for improvement of fatigue properties in welded joints of ship hull structures using low transformation temperature welding materials2017

    • Author(s)
      Shiga, C., Murakawa, H., Hiraoka et al.
    • Journal Title

      Welding in the World

      Volume: 61(4) Pages: 769-788

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] 粒子法とX線その場観察を用いたステンレス鋼レーザ溶接時のキーホール形成機構解明2016

    • Author(s)
      千村伊作,川人洋介(60%),村川英一
    • Journal Title

      レーザ加工学会誌

      Volume: 23 Pages: 45-52

    • NAID

      40020909528

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289240
  • [Journal Article] Recent research on welding distortion prediction in thin plate fabrication by means of elastic FE computation2016

    • Author(s)
      Wang, J., Yuan, H., Ma, N., Murakawa, H.
    • Journal Title

      Marine Structures

      Volume: 47 Pages: 42-59

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Thermo-mechanical analysis of line heating process by an efficient and accurate multi-level mesh refining method2016

    • Author(s)
      Huang, H., Murakawa, H.
    • Journal Title

      Marine Structures

      Volume: 49 Pages: 239-255

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Finite element analysis of deformation in early stage of multi-pass circumferential dissimilar welding of thick-walled pipes with narrow gap2016

    • Author(s)
      Serizawa, H., Okuda, Y., Murakawa, H.
    • Journal Title

      Welding in the World

      Volume: 60(5) Pages: 1037-1046

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Verification of methods for prediction of welding deformation applicable for real scale structures2016

    • Author(s)
      Murakawa, H.
    • Journal Title

      Yosetsu Gakkai Shi/Journal of the Japan Welding Society

      Volume: 85(5) Pages: 545-546

    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] 粒子法とX線その場観察を用いたステンレス鋼レーザ溶接時のキーホール形成機構解明2016

    • Author(s)
      千村伊作,川人洋介,村川英一
    • Journal Title

      レーザ加工学会誌

      Volume: 未定

    • NAID

      40020909528

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289240
  • [Journal Article] X線透視観察と粒子法に基づくチタンのレーザ溶接におけるキーホール形成因子の解明2016

    • Author(s)
      千村伊作,川人洋介(60%),村川英一,片山聖二
    • Journal Title

      軽金属溶接

      Volume: 54 Pages: 18-25

    • NAID

      130005165648

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289240
  • [Journal Article] Estimating inherent deformation in thin-plate Al-alloy joint by means of inverse analysis with the help of cutting technique2016

    • Author(s)
      Liang, W., Murakawa, H., Deng, D.
    • Journal Title

      Advances in Engineering Software

      Volume: 99 Pages: 89-99

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] X線透視観察と粒子法に基づくチタンのレーザ溶接におけるキーホール形成過程の分析2016

    • Author(s)
      千村伊作,川人洋介,村川英一,片山聖二
    • Journal Title

      軽金属溶接

      Volume: 6月号

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289240
  • [Journal Article] Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion2015

    • Author(s)
      Bhatti, A.A., Barsoum, Z., Murakawa, H., Barsoum, I.
    • Journal Title

      Materials and Design

      Volume: 65 Pages: 878-889

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Prediction of weld residual stress in a pressurized water reactor pressurizer surge nozzle2015

    • Author(s)
      Maekawa, A., Kawahara, A., Serizawa, H., Murakawa, H.
    • Journal Title

      Journal of Pressure Vessel Technology, Transactions of the ASME

      Volume: January Pages: 221-227

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Prediction of residual stresses induced by low transformation temperature weld wires and its validation using the contour method2015

    • Author(s)
      Gadallah, R., Tsutsumi, S., Hiraoka, K., Murakawa, H.
    • Journal Title

      Marine Structures

      Volume: 44 Pages: 232-253

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Journal Article] Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion2015

    • Author(s)
      Bhatti, A.A., Barsoum, Z., Murakawa, H., Barsoum, I.
    • Journal Title

      Materials and Design

      Volume: 65 Pages: 878-889

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Analysis of cross effect on inherent deformation during the line heating process - Part 1 - Single crossed heating lines2015

    • Author(s)
      Vega, A., Rashed, S., Murakawa, H.
    • Journal Title

      Marine Structures

      Volume: 40 Pages: 92-103

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] An efficient FE computation for predicting welding induced buckling in production of ship panel structure2015

    • Author(s)
      Wang, J., Ma, N., Murakawa, H.
    • Journal Title

      Marine Structures

      Volume: 41 Pages: 20-52

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Iterative substructure method employing concept of inherent strain for large-scale welding problems2014

    • Author(s)
      Murakawa, H., Ma, N., Huang, H.
    • Journal Title

      Welding in the World

      Volume: 59-1 Pages: 53-63

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Fast prediction of welding distortion using ISM and i-ISM with experimental validation2014

    • Author(s)
      Huang, H., Ma, N., Murakawa, H.
    • Journal Title

      Proceedings of the International Offshore and Polar Engineering Conference

      Volume: 2014 Pages: 55-60

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Mechanism investigation of welding induced buckling using inherent deformation method2014

    • Author(s)
      Wang, J., Rashed, S., Murakawa, H.
    • Journal Title

      Thin-Walled Structures

      Volume: 80 Pages: 103-119

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] A practical method for prediction of distortion produced on large thin plate structures during welding assembly2013

    • Author(s)
      H. Murakawa, Y. Okumoto, S. R ashed, M. Sano
    • Journal Title

      Welding in the World

      Volume: 57 Issue: 6 Pages: 793-802

    • DOI

      10.1007/s40194-013-0071-1

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-12F02735, KAKENHI-PROJECT-24656532
  • [Journal Article] Numerical prediction and mitigation of out-of-plane welding distortion in ship panel structure by elastic FE analysis2013

    • Author(s)
      J. Wang, S. Rashed, H. Murakawa, Y. Luo
    • Journal Title

      Marine Structures

      Volume: 34 Pages: 135-155

    • DOI

      10.1016/j.marstruc.2013.09.003

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-12F02735, KAKENHI-PROJECT-24656532
  • [Journal Article] Reduction of welding distortion for an improved assembly process for hatch coaming production2013

    • Author(s)
      J. Wang, M. Sano, S. Rashed, H. Murakawa
    • Journal Title

      Journal of Ship Production and Design

      Volume: 29 Pages: 153-161

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-12F02735
  • [Journal Article] Reduction of welding distortion for an improved assembly process for hatch coaming production2013

    • Author(s)
      Wang, J., Sano, M., Rashed, S., Murakawa, H.
    • Journal Title

      Journal of Ship Production and Design

      Volume: 29 (4) Issue: 4 Pages: 153-161

    • DOI

      10.5957/jspd.29.4.120058

    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Analysis and prediction of parallel effect on inherent deformation during the line heating process2013

    • Author(s)
      Vega, A., Escobar, E., Fong, A., Ma, N., Murakawa, H.
    • Journal Title

      Computer Modeling in Engineering and Sciences

      Volume: 90 (3) Pages: 197-210

    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Theoretical Prediction of Thermal Cycles and Hardness of HAZ due to Twin Wire Submerged Arc Welding2013

    • Author(s)
      Huang, H., Serizawa, H., Wang, J., Murakawa, H.
    • Journal Title

      QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY

      Volume: 31 Issue: 4 Pages: 109s-113s

    • DOI

      10.2207/qjjws.31.109s

    • NAID

      130004445743

    • ISSN
      0288-4771, 2434-8252
    • Language
      English
    • Data Source
      KAKENHI-PROJECT-24656532
  • [Journal Article] Arrest Analysis of Propagating Brittle Crack in Welded Structure2008

    • Author(s)
      H. Murakawa
    • Journal Title

      Proc. Int. Sym. on Structures under Earthquake, Impact, and Blast Loading 2008

      Pages: 67-71

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Arrest Analysis of Propagating Brittle Crack in Welded Structure2008

    • Author(s)
      H. Murakawa and H. Serizawa
    • Journal Title

      Proceedings of International Symposium on Structures under Earthquake, Impact, and Blast Loading 2008

      Pages: 67-71

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Development of a New Computational Method for Solving Inhomogeneous and Ultra Large Scale Model2008

    • Author(s)
      H. Serizawa, A. Kawahara, S. Itoh and H. Murakawa
    • Journal Title

      Corrosion, Wear, Fatigue and Relaiability of Ceramics, Ceramic Engineering and Science Proceedings Vol.29, Issue 3

      Pages: 173-179

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Hierarchical Multi-Grid Method for Ultra Large Scale Problem Based on Variational Theorem2008

    • Author(s)
      S. Itoh, K. Taguchi, Y. Umemoto, H. Serizawa and H. Murakawa
    • Journal Title

      Proceedings of the 15th International Conference on Computational & Experimental Engineering and Science (ICCES'08)

      Pages: 49-55

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Fractal Multi-Grid Method for Ultra Large Problems Based on Hybrid Variational Principle2007

    • Author(s)
      H. Murakawa, K. Taguchi, M. Shibahara and H. Serizawa
    • Journal Title

      Proceedings of the 2007 International Conference on Computational & Experimenta Engineering and Science

      Pages: 1902-1907

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Hierarchical Multi-Grid Method for Ultra Large Scale Computation2007

    • Author(s)
      H. Murakawa
    • Journal Title

      Proceeding of 2007 International Forum on Welding Science and Engineering

      Pages: 155-159

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Stress Analysis of Geometrically Complex and Ultra Large Scale Model by Fractal Multi-Grid Method2007

    • Author(s)
      H. Murakawa
    • Journal Title

      Ceramic Transactions Vol.198

      Pages: 21-26

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Fractal Multi-Grid Method for Ultra Large Problems Based on Hybrid Variational Principle2007

    • Author(s)
      H.Murakawa
    • Journal Title

      Proceedings of the 2007 International Conference on Computational & Experimental Engineering and Science

      Pages: 1902-1907

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Stress Analysis of Geometrically Complex and Ultra Large Scale Model by Fractal Multi-Grid Method2007

    • Author(s)
      H. Murakawa, H. Serizawa, M. Tejima, K. Taguchi and S. Itoh
    • Journal Title

      Characterization and Control of Interfaces for High Quality Advanced Materials II, Ceramic Transactions Vol.198

      Pages: 21-26

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Hierarchical Multi-Grid Method for Ultra Large Scale Computation2007

    • Author(s)
      H. Murakawa, H. Serizawa and S. Itoh
    • Journal Title

      Proceeding of 2007 International Forum on Welding Science and Engineering

      Pages: 155-159

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Fractal Multi-Grid Method for Ultra Large Scale Mechanical and Thermal Simulations2006

    • Author(s)
      H. Murakawa, H. Serizawa, M. Tejima and K. Taguchi
    • Journal Title

      Transactions of JWRI Vol.35, No.1

      Pages: 71-75

    • NAID

      120004845440

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Fractal Multi-Grid Method for Ultra Large Scale Mechanical and Thermal Simulations2006

    • Author(s)
      H.Murakawa
    • Journal Title

      Transactions of JWRI Vol.35, No.1

      Pages: 71-75

    • Data Source
      KAKENHI-PROJECT-18360353
  • [Journal Article] Fast Computational Scheme for Large Scale Nonlinear Transient Problems in Welding Mechanics2005

    • Author(s)
      H.Murakawa
    • Journal Title

      Advances in Computational & Experimental Engineering and Sciences 2005, Proceedings of the 2005 International Conference on Computational & Experimental Engineering and Sciences (ICCES'05) Chapter 2(CD-ROM)

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Computational Welding Mechanics for Practical Applications2005

    • Author(s)
      H.Murakawa
    • Journal Title

      Proc.Inter.Workshop on Development & Advancement of Computational Mechanics

      Pages: 14-25

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Computational Welding Mechanics for Practical Applications2005

    • Author(s)
      H.Murakawa
    • Journal Title

      The Proceedings of International Workshop on Development and Advancement of Computational Mechanics

      Pages: 14-25

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Fractal Multi-Grid Method for Ultra Large Scale FE Computation2005

    • Author(s)
      H.Murakawa
    • Journal Title

      Proceedings of the 19th Asian Technical Exchange and Advisory Meeting on Marine Structures

      Pages: 216-223

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Computational Welding Mechanics for Practical Applications2005

    • Author(s)
      H.Murakawa
    • Journal Title

      Proc. Inter. Workshop on Development & Advancement of Computational Mechanics

      Pages: 14-25

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Ultra Large Scale FE Computation Using Fractal Multi-Grid Method2005

    • Author(s)
      H.Murakawa
    • Journal Title

      Advances in Computational & Experimental Engineering and Science 2005, Proceedings of the 2005 International Conference on Computational & Experimental Engineering and Sciences (ICCES'05) Chapter 2

      Pages: 228-233

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] 高効率かつ高精度な溶接シミュレーション手法の研究2004

    • Author(s)
      西川弘泰, 尾田 勇, 芹澤 久, 村川英一
    • Journal Title

      溶接構造シンポジウム2004講演論文集

      Pages: 179-184

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Finite Element Analysis of Ceramic Composite Joints by Using a New Interface Potential2004

    • Author(s)
      H.Serizawa, H.Murakawa, M.Singh, C.A.Lewinsohn
    • Journal Title

      High Temperature Ceramic Matrix Composites 5

      Pages: 451-456

    • Data Source
      KAKENHI-PROJECT-15656220
  • [Journal Article] Prediction of Welding Distortion during the Assembly Process of Thin Plate Structures(2nd Report)-Influence of Welding Sequence on Welding Distortion-2004

    • Author(s)
      D.Deng, H.Serizawa, H.Murakawa
    • Journal Title

      関西造船協会論文集 第242号

      Pages: 97-104

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] 狭開先溶接時における延性低下割れ発生予測2004

    • Author(s)
      柴原正和, 〓〓明, 芹澤久, 村川英一, 伊藤真介, 中村照美, 平岡和雄
    • Journal Title

      溶接構造シンポジウム2004講演論文集

      Pages: 437-444

    • Data Source
      KAKENHI-PROJECT-15656220
  • [Journal Article] Development of New Interface Potential for Evaluating Strength of SiC/SiC Composite Joint2004

    • Author(s)
      H.Serizawa, C.A.Lewinsohn, H.Murakawa
    • Journal Title

      Journal of Nuclear Materials Vol.329-333

      Pages: 492-496

    • Data Source
      KAKENHI-PROJECT-15656220
  • [Journal Article] 逆解析による溶接固有変形の計測法に関する研究2004

    • Author(s)
      梁 偉, 曽根慎二, 芹澤 久, 村川英一
    • Journal Title

      関西造船協会論文集 第242号

      Pages: 89-96

    • NAID

      110003880246

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] 多層溶接時における延性低下割れの発生予測2004

    • Author(s)
      柴原正和, 芹澤久, 村川英一, 才田一幸, 西本和彦, 亀山雅司
    • Journal Title

      溶接構造シンポジウム2004講演論文集

      Pages: 445-452

    • Data Source
      KAKENHI-PROJECT-15656220
  • [Journal Article] Evaluation of Strength of SiC/SiC Composite Joint Using New Interface Potential2004

    • Author(s)
      H.Serizawa, C.A.Lewinsohn, H.Murakawa
    • Journal Title

      Composites Technologies for 2020, Proceedings of the Fourth Asian-Australasian Conference on Composite Materials (ACCM-4)

      Pages: 603-608

    • Data Source
      KAKENHI-PROJECT-15656220
  • [Journal Article] A Simple Measuring Method of Welding Inherent Deformation Using Inverse Analysis2004

    • Author(s)
      W.Liang, S.Sone, H.Serizawa, H.Murakawa
    • Journal Title

      Proceedings of the 14th International Offshore and Polar Engineering Conference Vol.IV

      Pages: 148-153

    • NAID

      110003880246

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Three-dimensional Thermal-elastic-plastic FEM Analysis for Predicting Residual Stress and Deformation under Multi-pass Welding2004

    • Author(s)
      H.Nishikawa, I.Oda, M.Shibahara, H.Serizawa, H.Murakawa
    • Journal Title

      Proceedings of the 14th International Offshore and Polar Engineering Conference Vol.IV

      Pages: 126-132

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] 薄板構造物の溶接変形に及ぼす溶接順序の影響2004

    • Author(s)
      〓 徳安, 芹澤 久, 村川英一
    • Journal Title

      溶接構造シンポジウム2004講演論文集

      Pages: 425-432

    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Finite Element Simulation for Welding Hot Cracking Using Temperature Dependent Interface Element2004

    • Author(s)
      M.Shibahara, H.Serizawa, H.Murakawa
    • Journal Title

      Proceedings of the Finnish-German-Japanese Joint International Seminar on Mechanical and Metallurgical Approaches to New Joining Process

      Pages: 213-220

    • Data Source
      KAKENHI-PROJECT-15656220
  • [Journal Article] Theoretical Prediction for High Quality Products and Reliable Assembly Process2003

    • Author(s)
      H.Murakawa
    • Journal Title

      Transactions of JWRI Vol. 32 No. 1

      Pages: 207-212

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15206080
  • [Journal Article] Theoretical Prediction for High Quality Products and Reliable Assembly Process2003

    • Author(s)
      H.Murakawa
    • Journal Title

      Transactions of JWRI Vol.32 No.1

      Pages: 207-212

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15206080
  • [Presentation] Crack Growth Analysis for Welded Structures Using Characteristic Tensor ‐Effect of Plastic Deformation on Crack Growth in Fracture and Fatigueー2021

    • Author(s)
      Hidekazu Murakawa, Ramy Gadallah, Masakazu Shibahara
    • Organizer
      69th IIW Annual Assembly, Commission X
    • Data Source
      KAKENHI-PROJECT-19H02366
  • [Presentation] 重ねすみ肉溶接継手の疲労シミュレーションに関する検討2017

    • Author(s)
      永井 卓也, 村川 英一, 堤 成一郎, 菅 哲男
    • Organizer
      溶接学会全国大会
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] Fatigue Crack Growth Simulation Using Characteristic Tensor2017

    • Author(s)
      H. Murakawa
    • Organizer
      The 31st Asian- Pacific Technical Exchange and Advisory Meeting on Marine Structures
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] 特性テンソルに基づく溶接構造における疲労き裂の進展解析2017

    • Author(s)
      村川英一
    • Organizer
      溶接構造シンポジウム2017
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] J積分法を用いたスポット溶接部強度評価(十字引張試験)解析における解析条件の検討2017

    • Author(s)
      石坂 達郎, 岡田 裕, 遊佐 泰紀, 千葉 晃司, 村川 英一, 芹澤 久, 柴原 正和, 田中 智行
    • Organizer
      溶接学会全国大会
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] 溶接をはじめとする各種熱加工を対象とした計算科学の産業への展開2017

    • Author(s)
      村川英一
    • Organizer
      日本機械学会関西支部講演会
    • Invited
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] 継手CTOD試験における前処理の影響に関する検討2017

    • Author(s)
      大川鉄平、萱森陽一、井上健裕、村川英一
    • Organizer
      溶接構造シンポジウム2017
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] 十字継手引張試験のJ積分評価の高精度化に関する研究2017

    • Author(s)
      髙橋 晶, 石坂 達郎, 岡田 裕, 遊佐 泰紀, 村川 英一, 芹澤 久, 田中 智行, 千葉 晃司
    • Organizer
      計算力学講演会
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] Engineering Tool for Fatigue Design of Welded Structures2017

    • Author(s)
      H. Murakawa
    • Organizer
      7th International Conference on Welding Science and Engineering
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] J積分を用いた十字引張試験片の破壊モードの予測解析2016

    • Author(s)
      石坂 達郎,岡田 裕,千葉 晃司,村川 英一,芹澤 久, 柴原 正和,田中 智行
    • Organizer
      第21回計算工学講演会
    • Place of Presentation
      新潟県新潟市 朱鷺メッセ
    • Year and Date
      2016-05-31
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] Numerical study on heat straightening process for welding distortion of a stiffened panel structure2015

    • Author(s)
      Blandon, J., Osawa, N., Masanori, S., Rashed, S., Murakawa, H.
    • Organizer
      the International Offshore and Polar Engineering Conference
    • Place of Presentation
      Hawaii
    • Year and Date
      2015-06-21
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] 溶接残留応力のシミュレーション結果を活用した疲労寿命予測エンジニアリングツール2015

    • Author(s)
      村川英一
    • Organizer
      溶接学会春季全国大会
    • Place of Presentation
      東京
    • Year and Date
      2015-04-22
    • Data Source
      KAKENHI-PROJECT-15H04212
  • [Presentation] 溶接継手の残留応力および固有変形に及ぼす試験片寸法の影響

    • Author(s)
      村川英一
    • Organizer
      溶接学会
    • Place of Presentation
      富山県宇奈月
    • Year and Date
      2014-09-02 – 2014-09-04
    • Data Source
      KAKENHI-PROJECT-12F02735
  • 1.  UEDA Yukio (30029037)
    # of Collaborated Projects: 9 results
    # of Collaborated Products: 0 results
  • 2.  NAKACHO Keiji (10112070)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 0 results
  • 3.  SHIBAHARA Masakazu (20350754)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 8 results
  • 4.  TOMITA Yasumitsu (30029251)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 5.  SERIZAWA Hisashi (20294134)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 24 results
  • 6.  YAO Tetsuya (20029284)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 7.  OOSAWA Naoki (90252585)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 8.  TOYOSADA Masahiro (30188817)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 9.  FUNAKI Toshihiko (90029174)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 10.  FUJIKUBO Masahiko (30156848)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 11.  生島 一樹 (80734003)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 1 results
  • 12.  MASAOKA Kouji (10244659)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 13.  HASHIMOTO Satoshi (50183554)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 14.  HAYASHI Sigehiro (60263216)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 15.  TAKAGI Ken (90183433)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 16.  HASEGAWA Kazuhiko (60106804)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 17.  OKADA Hiroo (90081398)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 18.  FUJIMOTO Yukio (60136140)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 19.  MIYAKE Shoji (40029286)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 20.  OKUMOTO Yasuhisa (50247962)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 21.  才田 一幸 (30178470)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 22.  YUAN Hua
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 23.  SHIBAYANAGI Toshiya (10187411)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  Kawahito Yousuke (70379105)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 25.  ITOH Shinsuke (50535052)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 26.  MIYAGAWA Yoshio (50229803)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 27.  SETSUHARA Yuichi (80236108)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 28.  MAKINO Yukio (20089890)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 29.  IKEUCHI Kenji (10030058)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 30.  YAJIMA Hiroshi (40263727)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 31.  YAMAMOTO Motomichi (30274111)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 32.  UMEDA Naoya (20314370)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 33.  SUZUKI Hiroyoshi (00252601)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 34.  TSUMURA Takuya (00283812)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 35.  TANAKA Manabu (20243272)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 36.  IWATA Mitsumasa (80034346)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 37.  橘 英三郎 (80029165)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 38.  上田 茂 (40261234)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 39.  渡邊 英一 (30026174)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 40.  川上 博士 (00252338)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 41.  片山 聖二 (10144528)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 42.  西本 浩司 (40501169)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 43.  豊田 政男 (00029191)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 44.  服部 陽一 (40198768)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 45.  牛尾 誠夫 (80029248)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 46.  金 裕哲 (20144529)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 47.  KIM You・Chul (00025909)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 48.  野本 敏治 (80011170)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 49.  田中 智行 (20452609)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 3 results
  • 50.  岡田 裕 (50281738)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 3 results
  • 51.  前田 新太郎 (30975339)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 52.  SAMANDI Masoud
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 53.  DUNNE Druce
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 54.  DEGUCHI Yoshikazu
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 55.  KAMICHIKA Ryoichi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 56.  FUJINO Hiroshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 57.  吉田 昌平
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 58.  MASOUD Saman
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 59.  DRUCE Dunne
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 60.  吉川 光明
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 61.  石浜 高明
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 62.  ISHIHAMA Takaaki
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 63.  RASHED Sheri
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 64.  RASHED Sherif M. H.
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 65.  SHERIF M.H.R
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 66.  SHERIF M.H.
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi