Ono Mariko 小野真理子

… Alternative Names

Researcher Number	60333374
Other IDs
Affiliation (Current)	2020: 独立行政法人労働者健康安全機構労働安全衛生総合研究所, 化学物質情報管理研究センター化学物質情報管理部, 特定有期雇用職員 2020: 独立行政法人労働者健康安全機構労働安全衛生総合研究所, 環境計測研究グループ, 特定有期雇用職員
Affiliation (based on the past Project Information) *help	2011 – 2013: 独立行政法人労働安全衛生総合研究所, 環境計測管理研究グループ, 上席研究員 2010: 労働安全衛生総合研究所, 上席研究員
Review Section/Research Field	Principal Investigator Reliable environmental measurement methods Except Principal Investigator Hygiene
Keywords	Principal Investigator リスク管理 / 曝露評価 / 環境測定 / ナノチューブ / CNT / MWCNT / 労働環境 / ナノ材料 / 国際情報交流 Except Principal Investigator 産業衛生 … More

Approach to the exposure assessment of MWCNT for new risk control systemPrincipal Investigator
- Principal Investigator
  
  ONO-OGASAWARA Mariko
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Reliable environmental measurement methods
- Research Institution
  National Institute of Occupational Safety and Health, Japan
Development of Evaluating Method for Airborne Manufactured-Nanomaterials in Work Environment
- Principal Investigator
  
  MYOJO Toshihiko
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Hygiene
- Research Institution
  University of Occupational and Environmental Health, Japan

All 2014 2013 2012 2011 2010 2009 2008 Other

All Journal Article Presentation Book

[Book] カーボンナノチューブの分散と応用最前線2014
- Author(s)
  小野真理子（分担執筆）
- Total Pages
  8
- Publisher
  株式会社シーエムシー出版
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] 工業用ナノマテリアルの作業環境測定　ばく露測定を目指して2014
- Author(s)
  小野真理子
- Journal Title
  
  空気清浄
  
  Volume: 51 Pages: 61-67
- NAID
  40019980074
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] Characteristics of multi-walled carbon nanotubes and background aerosols by carbon analysis; particle size and oxidation temperature2013
- Author(s)
  Mariko Ono-Ogasawara, Toshihiko Myojo
- Journal Title
  
  Adv Powder Technol
  
  Volume: Vol.24 Pages: 263-269
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] Approach to the Exposure Assessment of MWCNT by Considering Size Distribution and Oxidation Temperature of Elemental Carbon2013
- Author(s)
  Mariko Ono-Ogasawara, Mitsutoshi Takaya, Hisayo Kubota, Yasushi Shinohara, Shigeki Koda, Eiji Akiba, Shuji Tsuruoka, Toshihiko Myojo
- Journal Title
  
  J. Phys.: Conf. Ser.
  
  Volume: 429(012004) Pages: 1-7
- DOI
  10.1088/1742-6596/429/1/012004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] Evaluation of exposure risk in weaving process of MWCNT-coated yarn with real-time particle concentration measurements and characterization of dust particles2012
- Author(s)
  Mitsutoshi Takaya, Mariko Ono-Ogasawara, Yasushi Shinohara, Hisayo Kubota, Shuji Tsuruoka, Shigeki Koda
- Journal Title
  
  Ind Health
  
  Volume: Vol.50, No.2 Pages: 147-155
- NAID
  130004828658
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] Evaluation of exposure risk in weaving process of MWCNT-coated yarn with real-time particle concentration measurements and characterization of dust particles.2012
- Author(s)
  Mitsutoshi Takaya, Mariko Ono-Ogasawara, Yasushi Shinohara, Hisayo Kubota, Shuji Tsuruoka, Shigeki Koda
- Journal Title
  
  Ind Health
  
  Volume: 50 Pages: 147-155
- NAID
  130004828658
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] カーボンナノチューブの作業環境測定とその課題2012
- Author(s)
  小野真理子
- Journal Title
  
  労働衛生工学
  
  Volume: 50 Pages: 1-12
- NAID
  40019829118
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] ナノ材料の安全性評価の現状と製造・取扱時におけるリスク管理のあり方2011
- Author(s)
  小野真理子
- Journal Title
  
  セイフティエンジニアリング
  
  Volume: 164 Pages: 10-15
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] A Proposal of Method for Evaluating Airborne MWCNT Concentration.2011
- Author(s)
  Mariko Ono-Ogasawara and Toshihiko Myojo
- Journal Title
  
  Ind Health
  
  Volume: 49 Pages: 726-734
- NAID
  130004483509
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23615014
[Journal Article] A Nanoparticle sampler incorporating differential mobility analyzers and its application at a road-side near heavy traffic in Kawasaki, Japan2009
- Author(s)
  Mariko Ono-Ogasawara
- Journal Title
  
  Aerosol and Air Quality Research 9
  
  Pages: 290-304
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] Aerosol generation and measurement of multi-wall carbon nanotubes.2009
- Author(s)
  Myojo T, Oyabu T, Nishi K, Kadoya C, Tanaka I, Ono-Ogasawara M, Sakae H, Shirai T
- Journal Title
  
  J Nanoparticle Research 11
  
  Pages: 91-99
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] A nanoparticle sampler incorporating differential mobility analyzers and its application at a road-side near heavy traffic in Kawasaki, Japan.2009
- Author(s)
  Ono-Ogasawara M, Myojo T, Kobayashi S
- Journal Title
  
  Aerosol and Air Quality Research 9(2)
  
  Pages: 290-304
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] A Simple Direct Injection Method for GC/MS Analysis of PAHs in Particulate Matter2008
- Author(s)
  Mariko Ono-Ogasawara
- Journal Title
  
  Industrial Health 46
  
  Pages: 582-593
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] 直接加熱脱着-GCMSによるたばこ粒子中のニコチンとPAHの迅速分析2008
- Author(s)
  小野真理子
- Journal Title
  
  エアロゾル研究 23
  
  Pages: 200-209
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] A Simple Direct Injection Method for GC/MS Analysis of PAHs in Particulate Matter.2008
- Author(s)
  Ono-Ogasawara M, Myojo T, Smith TJ
- Journal Title
  
  Industrial Health 46
  
  Pages: 582-593
- NAID
  130004483328
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] Proposal of method for evaluating airborne MWCNT concentration.
- Author(s)
  Ono-Ogasawara M, Myojo T
- Journal Title
  
  Industrial Health 受理
- NAID
  130004483509
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Journal Article] Proposal of method for evaluating airborne MWCNT concentration
- Author(s)
  Mariko Ono-Ogasawara
- Journal Title
  
  Industrial Health
  
  Volume: (受理)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20590621
[Presentation] 労働環境におけるMWCNT測定－MWCNTエアロゾルとMWCNT含有粉じんについて－2013
- Author(s)
  小野真理子、鷹屋光俊、久保田久代、篠原也寸志、甲田茂樹、鶴岡秀志、明星敏彦
- Organizer
  第30回エアロゾル科学・技術研究討論会
- Place of Presentation
  京都市
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Exposure Assessment of MWCNT by Size Distribution and Oxidation Temperature of Elemental Carbon2013
- Author(s)
  Mariko Ono-Ogasawara, Toshihiko Myojo
- Organizer
  6th International Symposium on Nanotechnology, Occupational and Environmental Health
- Place of Presentation
  名古屋市
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] カーボンナノチューブの作業環境測定法2013
- Author(s)
  小野真理子, 明星敏彦
- Organizer
  第53回日本労働衛生工学会
- Place of Presentation
  (抄録集, p.40-41)
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] MWCNTエアロゾルの炭素分析によるキャラクタリゼーション2012
- Author(s)
  小野真理子, 明星敏彦
- Organizer
  第29回エアロゾル科学・技術研究討論会
- Place of Presentation
  (予稿集, pp.225-6)
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] A Proposal of Exposure Assessment Method for MWCNT Aerosols2011
- Author(s)
  Mariko Ono-Ogasawara, Toshihiko Myojo
- Organizer
  5th International Symposium on Nanotechnology–Occupational and Environmental Health
- Place of Presentation
  (PA-01, p.162)
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] A Proposal of Exposure Assessment Method for MWCNT Aerosols.2011
- Author(s)
  Mariko Ono-Ogasawara and Toshihiko Myojo
- Organizer
  5th International Symposium on Nanotechnology; Occupational and Environmental Health,
- Place of Presentation
  Boston, USA
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Release of Aerosol Particles with CNTs during Weaving Process of CNT‐coated Fibers into Fabric2011
- Author(s)
  Isamu Ogura, Mitsutoshi Takaya, Mariko Ono‐Ogasawara, Yasushi, Shinohara, Masao Gamo, Shigeki Koda
- Organizer
  5th International Symposium on Nanotechnology–Occupational and Environmental Health
- Place of Presentation
  (PA-13, p.174)
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] 製品中に含まれるMWCNT の同定方法の検討2011
- Author(s)
  小野真理子
- Organizer
  第51回日本労働衛生工学会
- Place of Presentation
  宇都宮
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] CNTコーティング糸の製織工程における作業環境評価第二報　電子顕微鏡による形態観察と炭素分析による評価2011
- Author(s)
  鷹屋　光俊，小野　真理子，久保田　久代，篠原　也寸志，甲田　茂樹
- Organizer
  第84回日本産業衛生学会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Exposure assessment of a weaving process of CNT-coated yarn by applying carbon analysis.2011
- Author(s)
  Mariko Ono-Ogasawara, Mitsutoshi Takaya, Hisayo Kubota, Yasushi Shinohara, Eiji Akiba, Shuji Tsuruoka, Shigeki Koda
- Organizer
  Inno.CNT Workshop, Metrology and Exposure Assessment of Carbon Nanotubes
- Place of Presentation
  Cologne, Germany
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Release of Aerosol Particles with CNTs during Weaving Process of CNT‐coated Fibers into Fabric．2011
- Author(s)
  Isamu Ogura, Mitsutoshi Takaya, Mariko Ono‐Ogasawara, Yasushi Shinohara, Masao Gamo, Shigeki Koda
- Organizer
  5th International Symposium on Nanotechnology; Occupational and Environmental Health
- Place of Presentation
  Boston, USA
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] CNTコーティング糸の製織工程で発生する粉じん粒子のキャラクタリゼーション2011
- Author(s)
  鷹屋光俊，小野真理子，篠原也寸志，久保田久代，甲田茂樹
- Organizer
  第51回日本労働衛生工学会
- Place of Presentation
  宇都宮
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] CNTコーティング糸の製織工程における作業環境評価第一報　粒子濃度の時間変化による評価2011
- Author(s)
  甲田　茂樹，鷹屋　光俊，小野　真理子，篠原　也寸志，久保田　久代
- Organizer
  第84回日本産業衛生学会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Anew concept of exposure assessment for MWCNT aerosols2010
- Author(s)
  Mariko Ono-Ogasawara
- Organizer
  Conference on Workplace Aerosols
- Place of Presentation
  カールスルーエ工科大学 Karlsruhe, Germany
- Year and Date
  2010-06-02
- Data Source
  KAKENHI-PROJECT-20590621
[Presentation] 環境空気中のMWCNTの濃度評価に関する検討2010
- Author(s)
  小野真理子,明星敏彦
- Organizer
  第50回日本労働衛生工学会
- Place of Presentation
  東京
- Year and Date
  2010-11-18
- Data Source
  KAKENHI-PROJECT-20590621
[Presentation] A new concept of exposure assessment for MWCNT aerosols Conference on Workplace Aerosols2010
- Author(s)
  Ono-Ogasawara M, Myojo T
- Place of Presentation
  Karlsruhe, Germany
- Year and Date
  2010-06-02
- Data Source
  KAKENHI-PROJECT-20590621
[Presentation] Characteristics of multi-walled carbon nanotubes and background aerosols by carbon analysis
- Author(s)
  Toshihiko Myojo, Mariko Ono-Ogasawara
- Organizer
  9th IOHA International Scientific Conference 2012
- Place of Presentation
  マレーシア、クアラルンプル
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] MWCNTエアロゾルの炭素分析によるキャラクタリゼーション
- Author(s)
  小野真理子，明星敏彦
- Organizer
  第29回エアロゾル科学・技術研究討論会
- Place of Presentation
  北九州市
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Exposure Assessment of MWCNT by Considering Size Distribution and Oxidation Temperature of Elemental Carbon
- Author(s)
  Mariko Ono-Ogasawara, Toshihiko Myojo
- Organizer
  6th International Nanotechnology Conference - Occupational and Environmental Safety
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Approach to the Exposure Assessment of MWCNT by Considering Size Distribution and Oxidation Temperature of Elemental Carbon
- Author(s)
  Mariko Ono-Ogasawara, Mitsutoshi Takaya, Hisayo Kubota, Yasushi Shinohara, Shigeki Koda, Eiji Akiba, Shuji Tsuruoka, Toshihiko Myojo
- Organizer
  NANOSAFE 2012, 3rd International conference on safe production and Use of Nanomaterials.
- Place of Presentation
  フランス、グルノーブル
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] カーボンナノチューブの作業環境測定法
- Author(s)
  小野真理子、明星敏彦
- Organizer
  第53回日本労働衛生工学会
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] 労働環境におけるMWCNT測定－MWCNTエアロゾルとMWCNT含有粉じんについて－
- Author(s)
  小野真理子，鷹屋　光俊、久保田久代、篠原也寸志、甲田茂樹、鶴岡　秀志、明星敏彦
- Organizer
  第30回エアロゾル科学・技術研究討論会
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-23615014
[Presentation] Striving for Exposure Assessment of MWCNTs by Particle Size and Oxidation Temperature of EC
- Author(s)
  Mariko Ono-Ogasawara, Mitsutoshi Takaya, Hisayo Kubota, Yasushi Shinohara, Shigeki Koda, Eiji Akiba, Shuji Tsuruoka, Toshihiko Myojo
- Organizer
  6th International Nanotechnology Conference -Occupational and Environmental Safety-, JNIOSH-NIOSH Collabrative Session
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-23615014

1. MYOJO Toshihiko (00209959)

# of Collaborated Projects: 2 results

# of Collaborated Products: 22 results
2. TANAKA Isamu (00038035)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
3. OOYABU Takako (20320369)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
4. SHINOHARA Yasushi (20321896)

# of Collaborated Projects: 1 results

# of Collaborated Products: 13 results

Ono Mariko 小野 真理子

ONO Mariko 小野 真理子

Research Projects

Research Products

Co-Researchers

Approach to the exposure assessment of MWCNT for new risk control systemPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Evaluating Method for Airborne Manufactured-Nanomaterials in Work Environment

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] カーボンナノチューブの分散と応用最前線2014

Author(s)

Total Pages

Publisher

Data Source

[Journal Article] 工業用ナノマテリアルの作業環境測定 ばく露測定を目指して2014

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Characteristics of multi-walled carbon nanotubes and background aerosols by carbon analysis; particle size and oxidation temperature2013

Author(s)

Journal Title

Data Source

[Journal Article] Approach to the Exposure Assessment of MWCNT by Considering Size Distribution and Oxidation Temperature of Elemental Carbon2013

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of exposure risk in weaving process of MWCNT-coated yarn with real-time particle concentration measurements and characterization of dust particles2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Evaluation of exposure risk in weaving process of MWCNT-coated yarn with real-time particle concentration measurements and characterization of dust particles.2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] カーボンナノチューブの作業環境測定とその課題2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] ナノ材料の安全性評価の現状と製造・取扱時におけるリスク管理のあり方2011

Author(s)

Journal Title

Data Source

[Journal Article] A Proposal of Method for Evaluating Airborne MWCNT Concentration.2011

Author(s)

Journal Title

NAID

Data Source

[Journal Article] A Nanoparticle sampler incorporating differential mobility analyzers and its application at a road-side near heavy traffic in Kawasaki, Japan2009

Author(s)

Journal Title

Data Source

[Journal Article] Aerosol generation and measurement of multi-wall carbon nanotubes.2009

Author(s)

Journal Title

Data Source

[Journal Article] A nanoparticle sampler incorporating differential mobility analyzers and its application at a road-side near heavy traffic in Kawasaki, Japan.2009

Author(s)

Journal Title

Data Source

[Journal Article] A Simple Direct Injection Method for GC/MS Analysis of PAHs in Particulate Matter2008

Author(s)

Journal Title

Data Source

[Journal Article] 直接加熱脱着-GCMSによるたばこ粒子中のニコチンとPAHの迅速分析2008

Author(s)

Journal Title

Data Source

Ono Mariko 小野真理子

ONO Mariko 小野真理子

[Journal Article] 工業用ナノマテリアルの作業環境測定　ばく露測定を目指して2014

[Presentation] CNTコーティング糸の製織工程における作業環境評価第二報　電子顕微鏡による形態観察と炭素分析による評価2011