Tanaka Ryutaro 田中隆太郎

… Alternative Names

TANAKA Ryutaro 田中隆太郎

TAKAKA Ryutaro 田中隆太郎

Less

Researcher Number	60361979
Other IDs
External Links
Affiliation (Current)	2025: 広島大学, 先進理工系科学研究科(工), 特定教授
Affiliation (based on the past Project Information) *help	2022 – 2023: 広島大学, 先進理工系科学研究科(工), 特定教授 2020 – 2021: 広島大学, 先進理工系科学研究科(工), 准教授 2017 – 2019: 広島大学, 工学研究科, 准教授 2016: 広島大学, 工学研究院, 准教授 2012: 広島大学, 大学院・工学研究院, 准教授 … More 2012: 広島大学, 工学(系)研究科(研究院), 准教授 2010 – 2011: 金沢大学, 機械工学系, 講師 2008: Kanazawa University, 機械工学系, 助教 2008: 金沢大学, 機械工学系, 講師 2007: Kanazawa University, Graduate School of Natural Science and Technology, Assistant Professor 2007: 金沢大学, 自然科学研究部, 助教 2006: 金沢大学, 自然科学研究科, 助手 Less
Review Section/Research Field	Principal Investigator Basic Section 18040:Machine elements and tribology-related / Design engineering/Machine functional elements/Tribology / Production engineering/Processing studies Except Principal Investigator Production engineering/Processing studies
Keywords	Principal Investigator 工具摩耗 / 切削温度 / 切削加工 / 摩擦係数 / 切削油剤 / 仕上面粗さ / 摩擦特性 / 快削鋼 / 旋削加工 / 硬質皮膜 … More / ゼロ切削 / 切削抵抗 / ノーズ半径 / 軸方向切込み / 切削工具 / 刃先丸み / 転写精度 / 仕上げ面生成領域 / cooling effect / lubricant effect / edge roundness / uncut chip thickness / cutting fluid / tool wear / 仕上げ面粗さ / 機械工作・生産工学 / トライボロジー / 温度履歴 / 摩擦温度 / 仕上げ面あらさ / 仕上面 / 旋削 / 断続切削 / べラーグ / 正面フライス切削工具摩耗 / BN快削鋼 / 機械構造用炭素鋼 / セラミック工具 / ベラーグ / 微量通電 / 正面フライス切削 … More Except Principal Investigator Grinding heat / Surface modification / Grind hardening / Air jet / Grinding wheel surface / Laser truing / Laser dressing / Laser conditioning / スパークアウト / 円筒研削 / メタルボンドダイヤモンド砥石 / 研削熱 / 表面改質 / 研削焼入れ / エアジェット / 砥石作業面 / レーザツルーイング / レーザドレッシング / レーザコンディショニング / エンドミル / 切削工具 / AIP法 / コーティング / 難削材 / 摩擦係数 / フリーカーボン / UBMS法 / PVD / コーティング工具 / ヘリングボーン / ヘリンボーン / 摺動面 / マイクロレンズ / マイクロパターニング / 微細加工 / レーザ加工 Less

送り停止直後のゼロ切削状態に着目した工具-被削材間の摩擦特性の機上評価法Principal Investigator
- Principal Investigator
  
  田中隆太郎
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Hiroshima University
On the machine estimation of Cutting fluid and prediction of surface roughness by micro feed millingPrincipal Investigator
- Principal Investigator
  
  TANAKA Ryutaro
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Hiroshima University
Development of friction test specializing in cutting tool and verification by newly surface roughness evaluation methodPrincipal Investigator
- Principal Investigator
  
  TANAKA Ryutaro
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Hiroshima University
Establishment of tool wear suppressing method for ceramic tool in cutting of free-machining steel for high speed machiningPrincipal Investigator
- Principal Investigator
  
  TANAKA Ryutaro
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
  Kanazawa University
Development of low friction coating films containing free carbon and their application to machining difficult-to-machine materials.
- Principal Investigator
  
  HOSOKAWA Akira
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa University
Studies on Micro Processing of Surface by Laser
- Principal Investigator
  
  UEDA Takashi
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa University
Study on cutting tool wear prevention method by control of self restoration layerPrincipal Investigator
- Principal Investigator
  
  TANAKA Ryutaro
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Kanazawa University
Studies on Grind-hardening with the Aid of Laser Conditioning of Grinding Wheel Surface
- Principal Investigator
  
  HOSAKAWA Akira
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kanazawa University

All 2023 2022 2021 2020 2019 2018 2017 2016 2013 2012 2011 2008 2007 2006

All Journal Article Presentation

[Journal Article] Study on Cutting Forces in Zero-cutting after Completely Stop of Feed Motion when face milling of Alloy 7182023
- Author(s)
  Sekiya Katsuhiko、TANAKA Ryutaro、Tanaka Shinpei、Yamada Keiji
- Journal Title
  
  International Journal of Abrasive Technology
  
  Volume: 11 Issue: 3 Pages: 175-183
- DOI
  10.1504/ijat.2023.10052374
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22K03885
[Journal Article] Study on cutting forces in zero-cutting after completely stop of feed motion when face milling of alloy 7182023
- Author(s)
  Shinpei Tanaka, Ryutaro Tanaka, Katsuhiko Sekiya and Keiji Yamada
- Journal Title
  
  International Journal of Abrasive Technology
  
  Volume: 11 Issue: 3 Pages: 175-183
- DOI
  10.1504/ijat.2023.130841
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22K03885
[Journal Article] Tool wear mechanism in up-cut end milling of AISI 1050 at different feed rates2020
- Author(s)
  Ryutaro TANAKA, Tai-Yi YEH, Kota MATSUDA, Katsuhiko SEKIYA and Keiji YAMADA
- Journal Title
  
  JAMDSM
  
  Volume: 14 Issue: 3 Pages: JAMDSM0042-JAMDSM0042
- DOI
  10.1299/jamdsm.2020jamdsm0042
- NAID
  130007823111
- ISSN
  1881-3054
- Language
  English
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04149
[Journal Article] Performance evaluation method for cutting fluids using cutting force in micro-feed end milling2020
- Author(s)
  Tomohiko Kitamura, Ryutaro Tanaka, Yasuo Yamane, Katsuhiko Sekiya, Keiji Yamada
- Journal Title
  
  Precision Engineering
  
  Volume: 62 Pages: 232-243
- DOI
  10.1016/j.precisioneng.2019.12.007
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K04149
[Journal Article] Wear Characteristics of Ceramic Tools When Turning BN Free-machining Steel2013
- Author(s)
  R. Tanaka
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: -
- NAID
  130003368565
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760111
[Journal Article] Wear Characteristics of Ceramic Tools When Turning BN Free-machining Steel2013
- Author(s)
  R. Tanaka, A. Hosokawa, T. Furumoto and T. Ueda
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: Vol.7No.3 Pages: 474-484
- NAID
  130003368565
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760111
[Journal Article] Cutting Performance of Ceramic Tools in Turning of Mild Steel2012
- Author(s)
  R. Tanaka, A. Hosokawa, T. Furumoto, and T. Ueda
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vol. 523-524 Pages: 493-496
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760111
[Journal Article] Cutting Performance of Ceramic Tools in Turning of Mild Steel2012
- Author(s)
  R. Tanaka
- Journal Title
  
  Key Engineering Materials
  
  Volume: 523-524 Pages: 493-496
- DOI
  10.4028/www.scientific.net/kem.523-524.493
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760111
[Journal Article] 研削熟を利用した表面硬化加工法-研削焼入れの試み-2006
- Author(s)
  森本雅憲, 鈴木将吾, 細川晃, 上田隆司, 田中隆太郎
- Journal Title
  
  2006年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 625-626
- Data Source
  KAKENHI-PROJECT-18560100
[Presentation] チタン合金切削時の工具-被削材間の摩擦特性－すくい面摩擦係数と逃げ面摩擦係数－2023
- Author(s)
  佐藤大悟，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2023年度精密工学会中国四国支部・九州支部共催広島地方講演会
- Data Source
  KAKENHI-PROJECT-22K03885
[Presentation] ニッケル基合金切削時の工具-被削材間の摩擦特性 ―すくい面摩擦係数と逃げ面摩擦係2023
- Author(s)
  杉森亮斗，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2023年度精密工学会中国四国支部・九州支部共催広島地方講演会
- Data Source
  KAKENHI-PROJECT-22K03885
[Presentation] 旋削加工における仕上げ面粗さの構成要素へおよぼす工具摩耗の影響2023
- Author(s)
  坂本遼，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2023年度精密工学会中国四国支部・九州支部共催広島地方講演会
- Data Source
  KAKENHI-PROJECT-22K03885
[Presentation] 送り運動停止後のゼロ切込み切削における抵抗力とPloughing forceの関係2022
- Author(s)
  熊野尊胤，田中晋平，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2022年度精密工学会九州支部・中国四国支部共催久留米地方講演会
- Data Source
  KAKENHI-PROJECT-22K03885
[Presentation] 送り運動停止後のゼロ切込み切削における抵抗力へおよぼす軸方向切込みの影響2022
- Author(s)
  佐藤大悟，田中晋平，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2022年度精密工学会九州支部・中国四国支部共催久留米地方講演会
- Data Source
  KAKENHI-PROJECT-22K03885
[Presentation] 送り運動停止後のゼロ切込み切削状態における摩擦特性とすくい面摩擦係数の関係2022
- Author(s)
  杉森亮斗，田中晋平，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2022年度精密工学会九州支部・中国四国支部共催久留米地方講演会
- Data Source
  KAKENHI-PROJECT-22K03885
[Presentation] 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century, LEM 20212021
- Author(s)
  Hayashida Takahide,Tanaka Ryutaro, Yamada Keiji, Sekiya Katsuhiko
- Organizer
  Effect of lubricant on tool wear in finished surface formation area of rounded nosed tool
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04149
[Presentation] 送りマークが不明瞭な粗さ曲線における工具刃先転写誤差の算出2020
- Author(s)
  今田晃樹, 田中隆太郎, 松田孝太，關谷克彦，山田啓司
- Organizer
  日本機械学会中国四国支部第58期総会・講演会
- Data Source
  KAKENHI-PROJECT-19K04149
[Presentation] 旋削加工におけるノーズ R 付き工具の仕上げ面生成領域の工具摩耗2020
- Author(s)
  林田孝秀, 田中隆太郎, 松田孝太，關谷克彦，山田啓司
- Organizer
  日本機械学会中国四国支部第58期総会・講演会
- Data Source
  KAKENHI-PROJECT-19K04149
[Presentation] Effect of Feed Rate on Tool Wear in Up Cut End Milling of AISI 1050 at Different Cutting Speed2019
- Author(s)
  Ryutaro TANAKA, Tai-Yi YEH, Kota MATSUDA, Katsuhiko SEKIYA and Keiji YAMADA
- Organizer
  The 8th International Conference on Manufacturing, Machine Design and Tribology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04149
[Presentation] Influence of Friction Characteristic of Cutting Fluid Evaluated by Cutting Force in Micro Feed End Milling on Surface Roughness2019
- Author(s)
  Tai-Yi YEH, Ryutaro TANAKA, Kota MATSUDA, Katsuhiko SEKIYA and Keiji YAMADA
- Organizer
  The 8th International Conference on Manufacturing, Machine Design and Tribology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04149
[Presentation] 微小送りエンドミル加工における切削抵抗を用いた切削油剤の評価の試み2018
- Author(s)
  吉岡龍一，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2018年度精密工学会中国四国支部香川地方講演会
- Data Source
  KAKENHI-PROJECT-16K06044
[Presentation] エンドミル加工における送り方向と送り速度が工具摩耗へおよぼす影響2018
- Author(s)
  杓谷明彦，田中隆太郎，關谷克彦，山田啓司
- Organizer
  2018年度精密工学会中国四国支部香川地方講演会
- Data Source
  KAKENHI-PROJECT-16K06044
[Presentation] 仕上げ面生成領域における工具刃先温度2017
- Author(s)
  今村　崇，田中隆太郎，小島　祐人，關谷　克彦，山田　啓司
- Organizer
  2017年度精密工学会中国四国支部鳥取地方講演会
- Data Source
  KAKENHI-PROJECT-16K06044
[Presentation] スローアウェイ工具を用いた摩擦試験における摩擦温度2016
- Author(s)
  山嵜慶祐，田中隆太郎，山根八洲男，關谷克彦，山田啓司
- Organizer
  2016年度精密工学会中国四国支部 - 山口地方学術講演会 -
- Place of Presentation
  大島商船高専
- Data Source
  KAKENHI-PROJECT-16K06044
[Presentation] 炭素鋼旋削におけるセラミック工具の切削性能-BN添加鋼への適用性の評価-2012
- Author(s)
  中村哲也,田中隆太郎,中西充,細川晃,上田隆司,古本達明
- Organizer
  日本機械学会北陸信越支部第49期総会・講演会
- Place of Presentation
  金沢工業大学(石川県)
- Year and Date
  2012-03-10
- Data Source
  KAKENHI-PROJECT-23760111
[Presentation] 炭素鋼旋削におけるセラミック工具の切削性能-BN添加鋼への適用性の評価-2012
- Author(s)
  中村哲也，田中隆太郎ほか
- Organizer
  日本機械学会北陸信越支部第49期総会・講演会
- Place of Presentation
  金沢工業大学(石川県)
- Data Source
  KAKENHI-PROJECT-23760111
[Presentation] Cutting Performance of Ceramic Tools in Turning of Mild Steel2012
- Author(s)
  R. Tanaka, A. Hosokawa, T. Furumoto and T. Ueda
- Organizer
  The 14th International Conference on Precision Engineering
- Place of Presentation
  Awaji Yumebutai International Conference Center, Hyogo, Japan
- Year and Date
  2012-11-10
- Data Source
  KAKENHI-PROJECT-23760111
[Presentation] Cutting Performance of Ceramic Tools in Turning of Mild Steel2012
- Author(s)
  R. Tanaka
- Organizer
  The 14th International Conference on Precision Engineering
- Place of Presentation
  Awaji Yumebutai International Conference Center
- Data Source
  KAKENHI-PROJECT-23760111
[Presentation] 高速対応型快削鋼のドライマシニング―セラミック工具によるBN添加鋼の高能率切削―2011
- Author(s)
  中西　充，田中隆太郎ほか
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢大学（石川県）
- Data Source
  KAKENHI-PROJECT-23760111
[Presentation] 高速対応型快削鋼のドライマシニング-セラミック工具によるBN添加鋼の高能率切削-2011
- Author(s)
  中西充,田中隆太郎,細川晃,古本達明,上田隆司
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢大学(石川県)
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-23760111
[Presentation] マイクロレンズを用いたYAG高調波による微細加工-表面周期構造による摩擦特性改良への応用-2008
- Author(s)
  桑畑俊也, 折茂秀一, 上田隆司, 細川晃, 古本達明, 田中隆太郎
- Organizer
  2008年度精密工学会北陸信越支部学術講演会
- Place of Presentation
  長野
- Year and Date
  2008-11-22
- Data Source
  KAKENHI-PROJECT-18360068
[Presentation] マイクロレンズを利用したYAG高調波による微細加工(第二報)2008
- Author(s)
  桑畑俊也, 上田隆司, 細川晃, 古本達明, 田中隆太郎
- Organizer
  2008年度精密工学会春期大会学術講演会
- Place of Presentation
  東京
- Year and Date
  2008-03-19
- Data Source
  KAKENHI-PROJECT-18360068
[Presentation] メタルボンドダイヤモンド砥石のレーザドレッシング-レーザ・エア一体照射型ヘッドによるドレッシング特性-2008
- Author(s)
  吉田剛, 細川晃, 古本達明, 田中隆太郎, 上田隆司
- Organizer
  2008年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  明治大学
- Year and Date
  2008-03-18
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560100
[Presentation] マイクロレンズを利用したYAG高調波による微細加工2007
- Author(s)
  桑畑俊也, 武田玲子, 上田隆司, 細川晃, 古本達明, 田中隆太郎
- Organizer
  2007年度精密工学会北陸信越支部学術講演会
- Place of Presentation
  金沢
- Year and Date
  2007-11-24
- Data Source
  KAKENHI-PROJECT-18360068
[Presentation] 高速対応型快削鋼の被削性に及ぼす微量通電の効果-旋削時における電流モニタリングと工具刃先温度2007
- Author(s)
  田中隆太郎
- Organizer
  2007年度砥粒加工学会学術講演会
- Place of Presentation
  東京工業大学
- Year and Date
  2007-09-07
- Data Source
  KAKENHI-PROJECT-18760110
[Presentation] 高速対応型快削鋼の被削性に及ぼす微量通電の効果-旋削時における電流モニタリングと工具刃先温度-2007
- Author(s)
  田中隆太郎, 林勇伝, 細川晃, 上田隆司, 古本達明
- Organizer
  2007年度砥粒加工学会学術講演会論文集(2007)
- Data Source
  KAKENHI-PROJECT-18760110
[Presentation] 高速対応型快削鋼の被削性に及ぼす微量通電の効果(第2報)-工具材種による影響-2006
- Author(s)
  林勇伝, 田中隆太郎, 細川晃, 上田隆司, 古本達明
- Organizer
  2006年度精密工学会秋季大会講演論文集(2006)
- Place of Presentation
  (CD-ROM)
- Year and Date
  2006-09-19
- Data Source
  KAKENHI-PROJECT-18760110
[Presentation] 研削熱を利用した表面硬化加工法 -研削焼入れの試み-2006
- Author(s)
  森本雅憲, 鈴木将吾, 細川晃, 上田隆司, 田中隆太郎
- Organizer
  2006年度精密工学会秋季大会学術講演会講演論文集
- Place of Presentation
  宇都宮大学
- Year and Date
  2006-09-22
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560100
[Presentation] 切削系における微量通電による工具摩耗抑制の試み-BN添加鋼の微量通電切削-2006
- Author(s)
  林勇伝, 田中隆太郎, 細川晃, 上田隆司, 古本達明
- Organizer
  日本金属学会・日本鉄鋼協会北陸信越支部平成18年度連合講演会概要集(2006) 72
- Year and Date
  2006-12-02
- Data Source
  KAKENHI-PROJECT-18760110

1. FURLMOTO Tatsuaki (60432134)

# of Collaborated Projects: 4 results

# of Collaborated Products: 4 results
2. HOSOKAWA Akira (40199493)

# of Collaborated Projects: 3 results

# of Collaborated Products: 6 results
3. UEDA Takashi (60115996)

# of Collaborated Projects: 3 results

# of Collaborated Products: 6 results
4. SHIMAMURA Koji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 千徳英介

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Tanaka Ryutaro 田中 隆太郎

TANAKA Ryutaro 田中 隆太郎

TAKAKA Ryutaro 田中 隆太郎

Research Projects

Research Products

Co-Researchers

送り停止直後のゼロ切削状態に着目した工具-被削材間の摩擦特性の機上評価法Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

On the machine estimation of Cutting fluid and prediction of surface roughness by micro feed millingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of friction test specializing in cutting tool and verification by newly surface roughness evaluation methodPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Establishment of tool wear suppressing method for ceramic tool in cutting of free-machining steel for high speed machiningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of low friction coating films containing free carbon and their application to machining difficult-to-machine materials.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Studies on Micro Processing of Surface by Laser

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on cutting tool wear prevention method by control of self restoration layerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Studies on Grind-hardening with the Aid of Laser Conditioning of Grinding Wheel Surface

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Study on Cutting Forces in Zero-cutting after Completely Stop of Feed Motion when face milling of Alloy 7182023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Study on cutting forces in zero-cutting after completely stop of feed motion when face milling of alloy 7182023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Tool wear mechanism in up-cut end milling of AISI 1050 at different feed rates2020

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Performance evaluation method for cutting fluids using cutting force in micro-feed end milling2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Wear Characteristics of Ceramic Tools When Turning BN Free-machining Steel2013

Author(s)

Journal Title

Tanaka Ryutaro 田中隆太郎

TANAKA Ryutaro 田中隆太郎

TAKAKA Ryutaro 田中隆太郎