Abe Yohei 安部洋平

… Alternative Names

ABE Yohei 安部洋平

Less

Researcher Number	60402658
Other IDs
Affiliation (Current)	2025: 豊橋技術科学大学, 工学(系)研究科(研究院), 准教授
Affiliation (based on the past Project Information) *help	2018 – 2022: 豊橋技術科学大学, 工学(系)研究科(研究院), 准教授 2012 – 2016: 豊橋技術科学大学, 工学(系)研究科(研究院), 准教授 2010 – 2011: Toyohashi University of Technology, 大学院・工学研究科, 講師 2009: Toyohashi University of Technology, 工学部, 講師 2006: Toyohashi University of Technology, Faculty of Engineering, Research Associate, 工学部, 助手 2006: 豊橋技術科学大学, 工学部, 助教
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments Except Principal Investigator Material processing/treatments / Basic Section 26050:Material processing and microstructure control-related
Keywords	Principal Investigator 潤滑 / 焼付き / しごき加工 / プレス成形 / 超高張力鋼板 / 塑性加工 / 接触状態 / 加工界面 / セラミック粒子添加油 / 潤滑油 … More / 潤滑メカニズム / その場観察 / 界面 / セラミック粒子 / 粒子挙動 / 加工条件 / ガラスダイ / カーボン微粒子 / セラミック微粒子 / 直接観察 / 微粒子添加油 / 中空部品 / 圧潰 / 塑性変形 / 3段ヘミング加工 / 圧壊メカニズム / ３段ヘミング / めっき鋼板 / 圧縮メカニズム / 変形集中の防止 / 圧縮荷重 / 中空部材 / 超ハイテン / 接合 / ヘミング / アルミニウム合金 / ステンレス鋼 / 板材成形 / アルミニウム合金容器 / サーメット / ヘテロ表面 / 表面粗さ / ステンレス鋼容器 / TiCN系サーメット / ヘテロ表面ダイス / 切口面高品質化 / 穴広げ試験 / フランジ割れ / 局部応力緩和 / 伸びフランジ / 穴広げ / プレス加工 / 高張力鋼板 / 材料加工・処理 … More Except Principal Investigator 通電加熱 / 超高張力鋼板 / 高生産性 / 高強度部と高延性 / 冷却履歴部分制御 / 部分増肉 / 冷却履歴 / 冷却履歴制御 / テーラード / ホットスタンピング / warm and hot shearing / die quenching / springback / press forming / warm and hot forming / heating of sheet set into die / resistance heating / ultra high tensile strength steel sheet / 温・熱間せん断加工 / ダイクエンチ / スプリングバック / プレス成形 / 温・熱間成形 / 型内加熱 / 電極材質 / 表面性状向上 / 局部加熱 / せん断加工 / 荷重低減 / 低加熱エネルギー / 小穴抜き加工 / ダイクエンチされた鋼板 / 金型寿命向上 / 切口面性状向上 / 低加熱エネルギー荷重低減 / 急速加熱 / 局部通電加熱 / 穴抜き加工 Less

Lubrication mechanism of stamping oil containing fine ceramic particlesPrincipal Investigator
- Principal Investigator
  
  Abe Yohei
- Project Period (FY)
  2019 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Toyohashi University of Technology
Development of tailored hot stamping having high productivity using partial control of cooling history
- Principal Investigator
  
  MORI KEN-ICHIRO
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Toyohashi University of Technology
Development of new hemming technology for joining ultra-high strength automobile partsPrincipal Investigator
- Principal Investigator
  
  Abe Yohei
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Toyohashi University of Technology
High Lubricating Mechanism in Ironing of Stainless Steel Cups Using Die Having Heterogeneous Surface for Production of Battery CasesPrincipal Investigator
- Principal Investigator
  
  ABE Yohei
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Toyohashi University of Technology
Development of shearing process of ultra-high strength steel sheets using local resistance heating
- Principal Investigator
  
  MORI Kenichiro
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Improvement in Quality of Sheared Edge and Stretch Flange ability in Stamping for Ultra-high strength Steel SheetsPrincipal Investigator
- Principal Investigator
  
  ABE Yohei
- Project Period (FY)
  2009 – 2010
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Development of Warm and Hot Press Forming of Ultra High Strength Steel Sheets Using Resistance Heating
- Principal Investigator
  
  MORI Ken-ichiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology

All 2023 2022 2021 2020 2017 2016 2014 2013 2012 2011 2010 2009 Other

All Journal Article Presentation

[Journal Article] Improvement of Seizure Resistance in Ironing of Aluminum Alloy Sheets and Stainless Steel Cups by Utilizing Laser Textured Die Having Lubricant Pockets2023
- Author(s)
  Yohei Abe and Mika Sugiura and Takumi Ando and Peerapong Kumkhuntod and Kamthon Septham and Witthaya Daodon and Ken-ichiro Mori
- Journal Title
  
  Metals
  
  Volume: 4-13 Issue: 4 Pages: 803-803
- DOI
  10.3390/met13040803
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K05095
[Journal Article] Increase in ironing limit of stainless steel cups with lubricants containing ceramic particles2022
- Author(s)
  Y. Abe, T. Yamashita and K. Mori
- Journal Title
  
  IOP Conf. Series: Materials Science and Engineering
  
  Volume: Vol.1270(MF2022) Issue: 1 Pages: 012018-012018
- DOI
  10.1088/1757-899x/1270/1/012018
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K05095
[Journal Article] Punching test for estimating tensile strength and total elongation of steel sheets2021
- Author(s)
  Nakamura Naotaka、Mori Ken-ichiro、Okada Hiroki、Abe Yohei
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 114 Issue: 5-6 Pages: 1847-1858
- DOI
  10.1007/s00170-021-06898-7
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] しごき加工における潤滑剤に添加したセラミック粒子挙動のガラスダイを用いたその場観察2020
- Author(s)
  安部洋平, 市村昂己, 森謙一郎
- Journal Title
  
  第71回塑性加工連合講演会講演論文集
  
  Volume: - Pages: 201-202
- Data Source
  KAKENHI-PROJECT-19K05095
[Journal Article] Joining of Taper Nut and Bolt to Ultra-high Strength Steel Sheet by Punching2020
- Author(s)
  Suzuki Yasutaka、Mori Ken-ichiro、Hosoya Ryo、Abe Yohei
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity
  
  Volume: 61 Issue: 714 Pages: 154-158
- DOI
  10.9773/sosei.61.154
- NAID
  130007879862
- ISSN
  0038-1586, 1882-0166
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] Steel sheets partnered with quenchable sheet in hot stamping of tailor-welded blanks and its application to separation prevention of fractured components2020
- Author(s)
  Mori Ken-ichiro、Suzuki Yasutaka、Yokoo Daisuke、Nishikata Michiya、Abe Yohei
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 111 Issue: 3-4 Pages: 725-734
- DOI
  10.1007/s00170-020-06100-4
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] Ironing limit of aluminium alloy cups with lubricants containing nanoparticles and tool steel die2020
- Author(s)
  Yohei Abe, Kai Sugiura, Ken-ichiro Mori
- Journal Title
  
  Procedia Manufacturing
  
  Volume: 50 Pages: 114-118
- DOI
  10.1016/j.promfg.2020.08.021
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19K05095
[Journal Article] Combined process of hot stamping and mechanical joining for producing ultra-high strength steel patchwork components2020
- Author(s)
  Mori Ken-ichiro、Kaido Tomoya、Suzuki Yasutaka、Nakagawa Yuki、Abe Yohei
- Journal Title
  
  Journal of Manufacturing Processes
  
  Volume: 59 Pages: 444-455
- DOI
  10.1016/j.jmapro.2020.10.025
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01749
[Journal Article] 適所・適剤・適量で活用する最新潤滑技術ヘテロ表面を有するサーメットダイによるステンレス鋼容器のしごき加工性の向上2013
- Author(s)
  安部洋平
- Journal Title
  
  プレス技術
  
  Volume: 51-10 Pages: 44-47
- Data Source
  KAKENHI-PROJECT-24760102
[Journal Article] 適所・適剤・適量で活用する最新潤滑技術ヘテロ表面を有するサーメットダイによるステンレス鋼容器のしごき加工性の向上2013
- Author(s)
  安部洋平
- Journal Title
  
  プレス技術
  
  Volume: 51-10 Pages: 44-47
- Data Source
  KAKENHI-PROJECT-24760102
[Journal Article] TiCN系サーメットダイを用いたステンレス鋼とアルミニウム合金円筒深絞り容器のしごき加工2013
- Author(s)
  安部洋平,藤田智大,森謙一郎,小坂田宏造
- Journal Title
  
  塑性と加工
  
  Volume: 54-634 Pages: 978-983
- NAID
  10031203765
- Data Source
  KAKENHI-PROJECT-24760102
[Journal Article] 逐次接触パンチによる超高張力鋼板の伸びフランジ成形性の向上2011
- Author(s)
  安部洋平, 乗田克哉, 森謙一郎
- Journal Title
  
  塑性と加工
  
  Volume: 52-604 Pages: 569-573
- NAID
  10028152209
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21760582
[Journal Article] 超高張力鋼板の破断面平滑加工による穴広げ性の向上2011
- Author(s)
  安部洋平, 池田豊, 森謙一郎
- Journal Title
  
  塑性と加工
  
  Volume: 52-603 Pages: 485-489
- NAID
  10028152067
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21760582
[Journal Article] 逐次接触パンチによる超高張力鋼板の伸びフランジ成形性の向上
- Author(s)
  安部洋平, 乘田克哉, 森謙一郎
- Journal Title
  
  塑性と加工 (掲載決定)
- NAID
  130004488282
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21760582
[Journal Article] 超高張力鋼板の破断面平滑加工による穴広げ性の向上
- Author(s)
  安部洋平, 池田豊, 森謙一郎
- Journal Title
  
  塑性と加工 (掲載決定)
- NAID
  10028152067
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21760582
[Presentation] Ironing limit of aluminium alloy cups with lubricants containing nanoparticles and tool steel die2020
- Author(s)
  Yohei Abe
- Organizer
  18th International Conference on Metal Forming 2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K05095
[Presentation] Assembly of ultra-high strength steel hollow part by hemming using pre-bent inner sheet2017
- Author(s)
  Yohei Abe
- Organizer
  International Conference on the Technology of Plasticity, ICTP 2017
- Place of Presentation
  Cambridge, United Kingdom
- Year and Date
  2017-09-17
- Data Source
  KAKENHI-PROJECT-26420048
[Presentation] 超高強度鋼部材のヘミング加工による接合と接合された中空部品の強度2017
- Author(s)
  安部洋平
- Organizer
  日本金属プレス工業協会平成２８年度第４回ホットスタンピング研究部会
- Place of Presentation
  豊橋技術科学大学
- Invited
- Data Source
  KAKENHI-PROJECT-26420048
[Presentation] ヘミング加工性と接合された中空部品の強度に及ぼす鋼板強度の影響2016
- Author(s)
  安部洋平
- Organizer
  日本塑性加工学会　第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-26420048
[Presentation] ヘミング加工により接合された高張力鋼中空部品の圧潰強度2014
- Author(s)
  安部洋平
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山大学
- Year and Date
  2014-10-12
- Data Source
  KAKENHI-PROJECT-26420048
[Presentation] ステンレス鋼容器のしごき加工におけるヘテロ表面ダイスの高潤滑メカニズムの解明2013
- Author(s)
  安部洋平, 畑下文裕, 柴孝志, 森謙一郎, ダオドン　ウィッタヤ
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  名古屋市大同町
- Data Source
  KAKENHI-PROJECT-24760102
[Presentation] ヘテロ表面ダイによるアルミニウム合金とステンレス鋼容器のしごき加工2012
- Author(s)
  安部洋平, 畑下文裕, 森謙一郎
- Organizer
  平成24年度塑性加工春季講演会
- Place of Presentation
  小松市
- Data Source
  KAKENHI-PROJECT-24760102
[Presentation] 冷間プレス成形におけるサーボプレスの利用2010
- Author(s)
  安部洋平
- Organizer
  第5回サーボプレス研究会
- Place of Presentation
  豊橋技術科学大学D棟617室
- Year and Date
  2010-11-25
- Data Source
  KAKENHI-PROJECT-21760582
[Presentation] サーボプレスと超・高張力鋼板の板成形2010
- Author(s)
  安部洋平
- Organizer
  日本塑性加工学会第282回塑性加工シンポジウム「サーボプレスの現状と展望」
- Place of Presentation
  電気通信大学総合研究棟301室
- Year and Date
  2010-05-29
- Data Source
  KAKENHI-PROJECT-21760582
[Presentation] サーボプレスと超・高張力鋼板の板成形2010
- Author(s)
  安部洋平
- Organizer
  日本塑性加工学会第282回塑性加工シンポジウム「サーボプレスの現状と展望」
- Place of Presentation
  電気通信大学総合研究棟301室
- Year and Date
  2010-05-29
- Data Source
  KAKENHI-PROJECT-21760582
[Presentation] 冷間プレス成形におけるサーボプレスの利用2010
- Author(s)
  安部洋平
- Organizer
  第5回サーボプレス研究会
- Place of Presentation
  豊橋技術科学大学 D棟617室
- Year and Date
  2010-11-25
- Data Source
  KAKENHI-PROJECT-21760582
[Presentation] 破断面平滑加工による超高張力鋼板の穴広げ性の向上2009
- Author(s)
  安部洋平, ほか
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-21760582
[Presentation] 部分傾斜パンチによる超高張力鋼板の伸びフランジ成形性の向上2009
- Author(s)
  安部洋平, ほか
- Organizer
  平成21年度塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-29
- Data Source
  KAKENHI-PROJECT-21760582

1. MORI Kenichiro (80127167)

# of Collaborated Projects: 5 results

# of Collaborated Products: 7 results
2. MAENO Tomoyoshi (80505397)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. MAKI Seijiro (20124315)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. TAKUDA Hirohiko (20135528)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. OTSU Masaaki (20304032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 中川佑貴 (50837739)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
7. 乘田克哉

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
8. 池田豊

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results

Abe Yohei 安部 洋平

ABE Yohei 安部 洋平

Research Projects

Research Products

Co-Researchers

Lubrication mechanism of stamping oil containing fine ceramic particlesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of tailored hot stamping having high productivity using partial control of cooling history

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of new hemming technology for joining ultra-high strength automobile partsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High Lubricating Mechanism in Ironing of Stainless Steel Cups Using Die Having Heterogeneous Surface for Production of Battery CasesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of shearing process of ultra-high strength steel sheets using local resistance heating

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Improvement in Quality of Sheared Edge and Stretch Flange ability in Stamping for Ultra-high strength Steel SheetsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Warm and Hot Press Forming of Ultra High Strength Steel Sheets Using Resistance Heating

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Improvement of Seizure Resistance in Ironing of Aluminum Alloy Sheets and Stainless Steel Cups by Utilizing Laser Textured Die Having Lubricant Pockets2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Increase in ironing limit of stainless steel cups with lubricants containing ceramic particles2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Punching test for estimating tensile strength and total elongation of steel sheets2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] しごき加工における潤滑剤に添加したセラミック粒子挙動のガラスダイを用いたその場観察2020

Author(s)

Journal Title

Data Source

[Journal Article] Joining of Taper Nut and Bolt to Ultra-high Strength Steel Sheet by Punching2020

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Steel sheets partnered with quenchable sheet in hot stamping of tailor-welded blanks and its application to separation prevention of fractured components2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Ironing limit of aluminium alloy cups with lubricants containing nanoparticles and tool steel die2020

Abe Yohei 安部洋平

ABE Yohei 安部洋平

[Journal Article] 適所・適剤・適量で活用する最新潤滑技術ヘテロ表面を有するサーメットダイによるステンレス鋼容器のしごき加工性の向上2013