• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

OSHIMA Kenji  大嶋 健司

ORCIDConnect your ORCID iD *help
… Alternative Names

大島 健司  オオシマ ケンジ

OHSHIMA Kenji  大嶋 健司

Less
Researcher Number 70026087
External Links
Affiliation (based on the past Project Information) *help 2003: 埼玉大学, 工学部, 教授
2000 – 2001: 埼玉大学, 工学部, 教授
1995 – 1996: 埼玉大学, 大学院・理工学研究科, 教授
1991 – 1992: 埼玉大学, 工学部, 教授
1987 – 1988: 埼玉大学, 工学部, 教授
1986: 埼大, 工学部, 助教授
Review Section/Research Field
Principal Investigator
溶接工学 / Material processing/treatments / Material processing/treatments
Except Principal Investigator
Material processing/treatments
Keywords
Principal Investigator
CCDカメラ / ニューラルネットワーク / 冷却速度 / 溶接ロボット / 適応制御 / 溶込み形状 / 裏ビード制御 / パルスMIG溶接 / ファジィ制御 / Model reference adaptive control … More / Penetration / Weld pool width / Pulsed current / CCD camera / Weld pool phenomena / Pulsed MIG welding / モデル規範型適応制御 / 溶融池面積 / 溶融池現象のデジタル制御 / 画像処理計測 / パルス電流波形 / デジタルコントローラ / 状態変数 / CCDシャッターカメラ / 板厚の変動 / パラメタ同定型適応制御 / 母板溶融量 / ワイヤ溶着量 / ルートギャップの検出 / 開先の変動 / モデル規範適応制御 / 溶込み深さ / 溶融池幅 / パルス電流 / 溶融池現象 / Power source characteristic / Welding robot / Feedforward control / Back bead control / CCD Camera / Welding condition control / Narrow gap welding / Switch back welding / 電源特性制御 / フィードフォワード制御 / 溶接条件制御 / 狭開先溶接 / スイッチバック溶接 / switch back welding / Multi-layred fuzzy control / Neural network / Fuzzy inference / Cooling time control / Weld pool control / knowledge based information and control / Intelligent welding robot / パイプ溶接 / スイッチ・バック溶接 / 階層型ファジィ制御 / ファジィ推論 / 冷却時間制御 / 溶接溶融池形状制御 / 知識情報処理・制御 / 知能ロボット / Neuro Network / Adaptive Control / Fuzzy Theory / Penetration Shape / Weld Pool / Back Bead Control / Butt Welding / Pulsed MIG Welding / 溶融池観察 / 片面裏ビ-ド溶接 / 溶け込み形状 / 開先溶接 / 片面裏ビード溶接 / ファジィ理論 / 溶融池 / 突合せ溶接 / 予見制御 / エキスパートロボット / 干渉回避 / トーチ姿勢制御 / 溶接線検出・追跡 / すみ肉溶接 … More
Except Principal Investigator
Switch back welding / Intelligent information process control / Detection of the gap shape / Arc sensor / Seam tracking / Neural network / Welding robots / スイッチバック溶接 / 知的情報処理制御 / 開先形状検出 / アークセンサ / 溶接線追跡 / ニューラルネットワーク / 溶接ロボット Less
  • Research Projects

    (6 results)
  • Co-Researchers

    (7 People)
  •  Adaptive Control of Back Bead and Bead Height under Gap Variation in Narrow Gap Robotic WeldingPrincipal Investigator

    • Principal Investigator
      KANEKO Yasuyoshi, 大嶋 健司
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      Saitama University
  •  Seam Tracking and Detection of Groove by using Neural Network in Robotic Welding

    • Principal Investigator
      YAMANE Satoshi
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      Saitama University
  •  Study on Control Of Weld Pool Shape And Cooling Rate By Using Fuzzy-Neural NetworkPrincipal Investigator

    • Principal Investigator
      OSHIMA Kenji
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Material processing/treatments
    • Research Institution
      Saitama University
  •  各種センサを持つエキスパートロボットによるGMA溶接の全自動化に関する研究Principal Investigator

    • Principal Investigator
      大島 健司
    • Project Period (FY)
      1992
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      溶接工学
    • Research Institution
      Saitama University
  •  Fuzzy Adaptive Control of Weld Pool in Pulsed MIG WeldingPrincipal Investigator

    • Principal Investigator
      OHSHIMA Kenji
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      溶接工学
    • Research Institution
      Saitama University
  •  Instrument and Adaptive Control of Weld Pool Phenomena in Pulsed MIG welding using CCD CameraPrincipal Investigator

    • Principal Investigator
      OHSHIMA Kenji
    • Project Period (FY)
      1986 – 1988
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      溶接工学
    • Research Institution
      Saitama University
  • 1.  KANEKO Yasuyoshi (10233892)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 2.  YAMANE Satoshi (10191363)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 3.  KUBOTA Takefumi (40047585)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 4.  KANJOU Yoshihiro
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  SUGITANI Yuuji
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 6.  SATOU Yuichi (30134828)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 7.  森 泰親 (00210138)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi