Fukushima Yoshio 福島祥夫

… Alternative Names

FUKUSHIMA Yoshio 福島祥夫

Less

Researcher Number	70310232
Other IDs
Affiliation (Current)	2023: 埼玉工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2011 – 2013: 群馬県立産業技術センター, その他部局等, 研究員 2011: 群馬県立群馬産業技術センター, 生産システム, 係長 2010 – 2011: 群馬県立群馬産業技術センター, 生産システム係, 係長
Review Section/Research Field	Principal Investigator Production engineering/Processing studies Except Principal Investigator Applied health science
Keywords	Principal Investigator 射出成形 / 分解ガス / ガス焼け不良 / ガス収集 / 可視化 / モニタリング Except Principal Investigator 軽度認知障害 / かなひろいテスト / 老化 / 脳リハビリテーション … More / 費薬物療法 / 言語学 / 母音抽出 / 量的解釈 / 質的解釈 / 認知症 / 非薬物療法 / 文字チェック / 母音 / 加齢 Less

Research on the visualization of injection process in complex shaped molding and the suppression technology of polymer degradationPrincipal Investigator
- Principal Investigator
  
  FUKUSHIMA YOSHIO
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Gunma Prefectural Industrial Technology Center
Verbal Analyses of the Aphasia Process for the Patients with Dementia and Their Preventive Effects
- Principal Investigator
  
  ANDA Junko
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Applied health science
- Research Institution
  Takasaki University of Health and Welfare

All 2014 2013 2012 2010 Other

All Journal Article Presentation Patent

[Journal Article] 実成形時の燃焼ガス収集とガス組成分析によるPBT燃焼挙動に関する研究2014
- Author(s)
  福島祥夫, 黒岩広樹, 小松秀和, 鈴木崇他
- Journal Title
  
  成形加工
  
  Volume: Vol.26 No.1 Pages: 27-33
- NAID
  130006646943
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560146
[Journal Article] 成形加工2014
- Author(s)
  福島祥夫,黒岩広樹,小松秀和,鈴木崇,須田高史,村田泰彦
- Volume
  Vol.26,No.1
- Pages
  27-33
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560146
[Journal Article] 型技術2013
- Author(s)
  高岡登志仁,福島祥夫,須田高史
- Volume
  Vol.28,No.2
- Pages
  44-47
- Data Source
  KAKENHI-PROJECT-23560146
[Journal Article] SGウェルドレス成形システムによる高付加価値成形2013
- Author(s)
  福島祥夫　他
- Journal Title
  
  型技術
  
  Volume: Vol.28 No.2 Pages: 4447-4447
- Data Source
  KAKENHI-PROJECT-23560146
[Journal Article] 軽度認知障害における言語認識活性化への一試論I2010
- Author(s)
  案田順子, 福島祥夫, 石坂公俊, 高橋希
- Journal Title
  
  高崎健康福祉大学紀要
  
  Volume: 第10 Pages: 13-23
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21500691
[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013
- Inventor(s)
  鈴木崇、福島祥夫、黒岩広樹、小松秀和　他
- Industrial Property Rights Holder
  群馬県　他
- Industrial Property Rights Type
  特許
- Filing Date
  2013-08-27
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013
- Inventor(s)
  鈴木崇,恩田紘樹,福島祥夫,黒岩広樹,小松秀和,一倉史人
- Industrial Property Rights Holder
  群馬県,㈱一倉製作所
- Industrial Property Rights Type
  特許
- Filing Date
  2013-08-27
- Overseas
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 成形不良を監視する装置付き金型2012
- Inventor(s)
  福島祥夫,鈴木崇,黒岩広樹,小松秀和,一倉史人
- Industrial Property Rights Holder
  群馬県,㈱一倉製作所
- Industrial Property Rights Type
  特許
- Filing Date
  2012-05-24
- Overseas
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 成形不良を監視する装置付き金型2012
- Inventor(s)
  福島祥夫　鈴木崇　黒岩広樹　小松秀和　他
- Industrial Property Rights Holder
  群馬県　他
- Industrial Property Rights Type
  特許
- Filing Date
  2012-05-24
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation]2014
- Author(s)
  鈴木崇,福島祥夫,黒岩広樹,恩田絋樹,小松秀和
- Organizer
  群馬県分析研究会
- Place of Presentation
  前橋
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 不活性ガス雰囲気下での金属界面におけるPBTのガス焼け現象2014
- Author(s)
  鈴木崇、福島祥夫、黒岩広樹、恩田絋樹、小松秀和　他
- Organizer
  第38回群馬県分析研究会2014
- Place of Presentation
  群馬県立群馬産業技術センター
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 成形加工2013
- Author(s)
  恩田絋樹,黒岩広樹,福島祥夫,鈴木崇,小松秀和
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation]2013
- Author(s)
  T.Suda, H.Kuroiwa, Y.Fukushima, T.Suzuki, F.Takeuti
- Organizer
  The 7th International Conference on Leading Edge Manufacturing in 21st Century LEM21 in Matsushima
- Place of Presentation
  松島
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] Detection of the Burn Mark on the Plastic Surface Using Image Analysis －Fundamental study for reduction the environmental impact by unpainted plastic products－2013
- Author(s)
  Takashi SUDA, Yoshio FUKUSHIMA, Hiroki KUROIWA,Takashi SUZUKI et al.
- Organizer
  The 7th International Conference on Leading Edge Manufacturing in 21st Century LEM21 in Matsushima 2013
- Place of Presentation
  松島大観荘
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 不活性ガス充填によるポリブチレンテレフタレート成形時の生成挙動2013
- Author(s)
  恩田紘樹、黒岩広樹、福島祥夫、鈴木崇、小松秀和他
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  タワーホール船堀
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 成形加工2012
- Author(s)
  鈴木崇,福島祥夫,黒岩広樹,茂木幸伸,小松秀和,瀧上昭治
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation]2012
- Author(s)
  福島祥夫,鈴木崇,黒岩広樹,小松秀和
- Organizer
  成形加工シンポジア
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] ガスセンサによる実成形時の発生ガス検知に関する基礎的検討
- Author(s)
  福島祥夫鈴木崇　黒岩広樹　小松秀和
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  ウインクあいち
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 実成形時のガス収集法とガス分析に基づく成形過程でのPBTガス焼けに関する考察
- Author(s)
  鈴木崇　福島祥夫　黒岩広樹　小松秀和　他
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  タワーホール船堀
- Data Source
  KAKENHI-PROJECT-23560146

1. ANDA Junko (40176011)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
2. KIMURA Norihiro (50458452)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. ISHIZAKA Kimitosi (10438757)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
4. SUZUKI Takashi (40196837)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results
5. KUROIWA Hiroki (10553480)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results
6. KOMATSU Hidekazu (20469886)

# of Collaborated Projects: 1 results

# of Collaborated Products: 10 results
7. MOTEGI Yukinobu (20552558)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
8. TAKIGAMI Syouji (70143203)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
9. 児玉直樹 (50383146)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Fukushima Yoshio 福島 祥夫

FUKUSHIMA Yoshio 福島 祥夫

Research Projects

Research Products

Co-Researchers

Research on the visualization of injection process in complex shaped molding and the suppression technology of polymer degradationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Verbal Analyses of the Aphasia Process for the Patients with Dementia and Their Preventive Effects

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 実成形時の燃焼ガス収集とガス組成分析によるPBT燃焼挙動に関する研究2014

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 成形加工2014

Author(s)

Volume

Pages

Data Source

[Journal Article] 型技術2013

Author(s)

Volume

Pages

Data Source

[Journal Article] SGウェルドレス成形システムによる高付加価値成形2013

Author(s)

Journal Title

Data Source

[Journal Article] 軽度認知障害における言語認識活性化への一試論I2010

Author(s)

Journal Title

Data Source

[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 成形不良を監視する装置付き金型2012

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 成形不良を監視する装置付き金型2012

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Presentation]2014

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] 不活性ガス雰囲気下での金属界面におけるPBTのガス焼け現象2014

Author(s)

Organizer

Place of Presentation

Data Source

[Presentation] 成形加工2013

Author(s)

Place of Presentation

Data Source

[Presentation]2013

Author(s)

Fukushima Yoshio 福島祥夫

FUKUSHIMA Yoshio 福島祥夫