Uemori Takeshi 上森武

… Alternative Names

UEMORI Takeshi 上森武

上森タケシウエモリタケシ

Less

Researcher Number	70335701
Other IDs
External Links
Affiliation (Current)	2025: 岡山大学, 環境生命自然科学学域, 准教授
Affiliation (based on the past Project Information) *help	2023: 岡山大学, 環境生命自然科学学域, 准教授 2021 – 2022: 岡山大学, 自然科学学域, 准教授 2014 – 2020: 岡山大学, 自然科学研究科, 准教授 2015: 岡山大学, 工学部, 准教授 2012 – 2013: 近畿大学, 工学部, 准教授 … More 2012: 近畿大学, 工学部機械工学科, 准教授 2008 – 2011: 近畿大学, 工学部, 講師 2007: Hiroshima University, 大学院・工学研究科, 助教 2005 – 2006: 広島大学, 大学院工学研究科, 助手 2003 – 2005: 広島大学, 大学院・工学研究科, 助手 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18010:Mechanics of materials and materials-related / Basic Section 26050:Material processing and microstructure control-related Except Principal Investigator Production engineering/Processing studies / Basic Section 18010:Mechanics of materials and materials-related / Material processing/Microstructural control engineering / Materials/Mechanics of materials
Keywords	Principal Investigator 巨視的塑性理論 / 結晶塑性理論 / 降伏曲面 / 塑性異方性 / 結晶塑性 / バウシンガー効果 / 集合組織 / 転位蓄積 / 多曲面 / 加工硬化 … More / 降伏段 / 有限要素解析 / 降伏点現象 / 材料構成式 / プレス成形 / マクロCAE / 変形集合組織 / スプリングバック / 弾塑性力学 / 有限要素法 / 材料モデル / 残留応力 / バウシンガ効果 / 高精度材料モデル / FEM / 一貫成形 / 大ひずみ / 弾塑性材料モデル / 高精度構成方程式 / r値 / 塑性構成式 / 構成方程式 / 二軸引張り試験 / シミュレーション / 構成モデル / 異方性 / 高張力鋼板 … More Except Principal Investigator 板材成形 / 構成式 / 成形加工 / 純チタン / 破壊 / 変形の局所化 / 不均一変形 / チタン合金 / 表面あれ / 多結晶金属材料 / 表面高度分布 / 塑性不均一変形 / 弾性不均一変形 / 有限要素法 / 強度評価 / 複合硬化則 / 弾塑性構成式 / 移動硬化則 / バウシンガー効果 / 塑性加工 / 塑性力学 / 冷間鍛造 / 高張力鋼板 / 矯正加工 / 数値解析 / プレス加工 / 矯正工程 / 2次元検出 / X線 / 金属薄板 / プレス成形 / 残留応力 / Aluminum alloy sheet / Magnesium alloy sheet / Steel sheet / Yield surface / Constitutive model / Plasticity / Sheet metal forming / アルミニウム / アルミニウム合金板 / マグネシウム合金板 / 鋼板 / 降伏曲面 / 塑性変形 / 最適設計 / メタモデル / 最適プロセス / スプリングバック / プレス金型 / 速度・温度依存性 / 繰返し粘塑性 / 接着剤の繰返し粘塑性 / 接着接合板 / 冷・熱間加工 / CAE / 熱間加工 / 成形限界 / 弾塑性構成モデル / 高機能難加工板材 Less

Analytical study of yield point phenomena and work-hardening by dislocation accumulation modelbased on the multi-surface plasticity theoryPrincipal Investigator
- Principal Investigator
  
  上森武
- Project Period (FY)
  2023 – 2026
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Okayama University
Prediction of deformation localization and fracture in polycrystalline titanium alloy based on 3D measurement of ultra-small inhomogeneous deformation
- Principal Investigator
  
  Tada Naoya
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Okayama University
Springback analysis of metallic materials by yield surface taken into into consideration crystal orientation changes with plastic deformationPrincipal Investigator
- Principal Investigator
  
  Uemori Takeshi
- Project Period (FY)
  2019 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Okayama University
Prediction of Development of Inhomogeneous Plastic Deformation and Fracture Based on Change in Elastic Height Distribution in Polycrystalline Metals
- Principal Investigator
  
  Tada Naoya
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Okayama University
Improvement of accuracy of in-service strength evaluation simulation of cold forged parts
- Principal Investigator
  
  Hayakawa Kunio
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Shizuoka University
Development of integrated forming finite element method with high accurate elasto-plastic material model at large strains and its applicationsPrincipal Investigator
- Principal Investigator
  
  Uemori Takeshi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Okayama University
Establishment of prediction and evaluation techniques of the effect of initial residual stress in sheet metal forming process
- Principal Investigator
  
  Hayakawa Kunio
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Shizuoka University
Optimum press-die design for springback compensation by material-mechanical meta-model building
- Principal Investigator
  
  Yoshida Fusahito
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Multiscale analysis of plastic anistropy and Bauschinger effect and Its press stamping simulationsPrincipal Investigator
- Principal Investigator
  
  UEMORI Takeshi
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kinki University
Modeling of viscoplastic behavior of highly ductile acrylic adhesive under cyclic torsion and its application for press- forming analysis of adhesively bonded sheet metals
- Principal Investigator
  
  TAKIGUCHI Michihiro
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima National College of Maritime Technology
Accurate material models and prediction of forming limits on high performance difficult-to-form sheet metals for cold and hot forming CAE
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2008 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
高張力銅板の集合組織と異方性を表現する塑性構成モデルとその数値シミュレーションPrincipal Investigator
- Principal Investigator
  
  上森武
- Project Period (FY)
  2005 – 2007
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Constitutive models of plasticity for anisotropic sheet metals for cold/warm forming and their forming simulation applications
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY

[Book] 60 Excellent Invensions in Metal Forming (E. Tekkaya edt.)2015
- Author(s)
  F. Yoshida and T. Uemori
- Total Pages
  6
- Publisher
  Springer
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Tensile properties and slip deformation behavior of pure titanium thin wire with a small diameter-to-grain-size ratio2023
- Author(s)
  Junji Sakamoto, Naoya Tada, Takeshi Uemori
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 863 Pages: 144532-144532
- DOI
  10.1016/j.msea.2022.144532
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21H01214
[Journal Article] Prediction of slip activity of crystal grains around semi-circular and semi-elliptical notches in thin-sheet specimens of pure titanium using formulated macroscopic stress distribution and crystal orientation2023
- Author(s)
  Naoya Tada, Takeshi Uemori, Junji Sakamoto
- Journal Title
  
  Engineering Failure Analysis
  
  Volume: 153 Pages: 107623-107623
- DOI
  10.1016/j.engfailanal.2023.107623
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21H01214
[Journal Article] Prediction of the Fracture Location by Tensile Tests of Gray Cast Iron Based on the Dimensional Changes of Graphite Flakes2021
- Author(s)
  Naoya Tada, Takeshi Uemori, Junji Sakamoto
- Journal Title
  
  Transactions of the ASME, Journal of Pressure Vessel Technology
  
  Volume: 143 Issue: 2 Pages: 1-8
- DOI
  10.1115/1.4048063
- NAID
  120007161126
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H01337
[Journal Article] Analysis of the change of direct current potential difference and diameter distribution of thin pure titanium wire subjected to tensile and fatigue loads for fracture prediction2020
- Author(s)
  坂本惇司，高木佑輔，上森武，多田直哉
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 86 Issue: 882 Pages: 19-00351-19-00351
- DOI
  10.1299/transjsme.19-00351
- NAID
  130007801826
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01337
[Journal Article] Evaluation of strength of stainless steel bolt without heat treatment considering Bauschinger effect during manufacturing process2020
- Author(s)
  Narita S.、Hayakawa K.、Uemori T.、Kubota Y.
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 278 Pages: 116481-116481
- DOI
  10.1016/j.jmatprotec.2019.116481
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K06856
[Journal Article] Finite Element Study of the Effect of Internal Crack on Surface Profile Change due to Low Loading of Turbine Blade2020
- Author(s)
  Junji Sakamoto, Naoya Tada, Takeshi Uemori, Hayato Kuniyasu
- Journal Title
  
  Applied Sciences
  
  Volume: 10 Issue: 14 Pages: 1-14
- DOI
  10.3390/app10144883
- NAID
  120006877907
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01337
[Journal Article] Crystal Plasticity Finite Element Analysis of Effects of Microscopic Non-Uniform Deformation on Surface Roughness of Pure Titanium Sheet2019
- Author(s)
  上森武，柿原大毅，多田直哉
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 68 Issue: 6 Pages: 478-484
- DOI
  10.2472/jsms.68.478
- NAID
  130007665157
- ISSN
  0514-5163, 1880-7488
- Year and Date
  2019-06-15
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01337
[Journal Article] Microscopic Elastic and Plastic Inhomogeneous Deformations and Height Changes on the Surface of a Polycrystalline Pure-Titanium Plate Specimen under Cyclic Tension2018
- Author(s)
  Naoya Tada, Takeshi Uemori
- Journal Title
  
  Applied Sciences
  
  Volume: 8 Issue: 10 Pages: 1-16
- DOI
  10.3390/app8101907
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18H01337
[Journal Article] Effect of Hardening Rule for Spring Back Behavior of Forging2017
- Author(s)
  S. Narita, K. Hayakawa, Y. Kubota, T. Harada, T. Uemori
- Journal Title
  
  Procedia Engineering
  
  Volume: 207 Pages: 167-172
- DOI
  10.1016/j.proeng.2017.10.756
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06856
[Journal Article] Theoretical predicitions of fractre and springback for high tensile strength steel sheets under stretch bending2017
- Author(s)
  T. Uemori, T. Naka, N. Tada, H. Yoshimura, T. Katahira, F. Yoshida
- Journal Title
  
  Procedia Engineering
  
  Volume: 207 Pages: 1594-1598
- DOI
  10.1016/j.proeng.2017.10.1054
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06856, KAKENHI-PROJECT-15K05737
[Journal Article] Description of Closure of Cyclic Stress-Strain Loop and Ratcheting Based on Y-U Model2016
- Author(s)
  Fusahito Yoshida, Hiroshi Hamasaki, Takeshi Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 725 Pages: 351-358
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05737
[Journal Article] 冷間多段鍛造による非調質ボルトの成形および強度解析に及ぼす硬化則の影響2016
- Author(s)
  成田忍, 上森武, 早川邦夫, 久保田義弘
- Journal Title
  
  塑性と加工
  
  Volume: 57 Pages: 50-56
- NAID
  130005284345
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05737
[Journal Article] Springback Analysis of Aluminum Alloy Sheet Metals by Yoshida-Uemori Model2016
- Author(s)
  Takeshi Uemori, Kento Fujii, Toshiya Nakata, Shinobu Narita, Naoya Tada, Tetsuo Naka, Fusahito Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 725 Pages: 566-571
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05737
[Journal Article] Modeling of anisotropic hardening of sheet metals including description of the Bauschinger effect2015
- Author(s)
  F. Yoshida, H. Hamasaki, T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 75 Pages: 170-188
- DOI
  10.1016/j.ijplas.2015.02.004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Implicit stress integration and consistent tangent matrix for Yoshida's 6th order polynomial yield function with Yoshida-Uemori kinematic hardening rule2015
- Author(s)
  Hiroshi Hamasaki, Fusahito Yoshida, Takeshi Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 651-653 Pages: 558-563
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Implicit Stress Integration and Consistent Tangent Matrix for Yoshida’s 6th Order Polynomial Yield Function Combined with Yoshida-Uemori Kinematic Hardening Rule2015
- Author(s)
  H. Hamasaki, F. Yoshida, T. Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 651-653 Pages: 558-563
- DOI
  10.4028/www.scientific.net/kem.651-653.558
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] アルミニウム合金板のスプリングバックに及ぼすバウシンガ効果と異方性の影響2015
- Author(s)
  上森武，澄川智史，中哲夫，麻寧緒，吉田総仁
- Journal Title
  
  軽金属
  
  Volume: 65 Pages: 582-587
- NAID
  130005115296
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15K05737
[Journal Article] A model of anisotropy evolution of sheet metals2014
- Author(s)
  Fusahito Yoshida, Hiroshi Hamasaki, Takeshi Uemori
- Journal Title
  
  Procedia Engineering
  
  Volume: 81 Pages: 1216-1221
- DOI
  10.1016/j.proeng.2014.10.100
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Constitutive equations of stress- strain responses of aluminum sheet under stress path change2013
- Author(s)
  T . Uemori, S. Sumikawa, S. Tamura, F . Y oshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vols.535-536 Pages: 385-388
- DOI
  10.4028/www.scientific.net/kem.535-536.101
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-23760121
[Journal Article] Modeling of Bauschinger effect during stress reversal2013
- Author(s)
  Takeshi Uemori, Satoshi Sumikawa, Fusahito Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 64 Issue: 12 Pages: 1267-1272
- DOI
  10.1002/srin.201300048
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Modeling of Bauschinger effect during stress reversal2013
- Author(s)
  T. Uemori, S. Sumikawa and F. Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 45 Pages: 119-139
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] A user-friendly 3D yield function to describe anisotropy of steel sheets2013
- Author(s)
  F. Yoshida, H. Hamasaki and T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 45 Pages: 119-139
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Influence of Anisotropic Yield Functions on Parameters of Yoshida-Uemori Model2013
- Author(s)
  H. Kano, T. Uemori and F.Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 554-557 Pages: 2440-2452
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] A user-friendly 3D yield function to describe anisotropy of steel sheets2013
- Author(s)
  F. Yoshida, H. Hamasaki, T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: Vol.45 Pages: 119-139
- DOI
  10.1016/j.ijplas.2013.01.010
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-24360056
[Journal Article] Constitutive equations of stress-strain responses of aluminum sheet under stress path changes2013
- Author(s)
  T. Uemori and F. Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 535-536 Pages: 101-104
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Constitutive equations of stress-strain responses of aluminum sheet under stress path change2013
- Author(s)
  Takeshi Uemori, ほか4名
- Journal Title
  
  Key Engineering Materials
  
  Volume: 535-536 Pages: 101-104
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Influence of Anisotropic Yield Functions on Parameters of Yoshida-Uemori Model2013
- Author(s)
  Hirotaka Kano, Jiro Hiramoto, Toru Inazumi, Takeshi Uemori, Fusahito Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 554 - 557 Pages: 2440-2452
- DOI
  10.4028/www.scientific.net/kem.554-557.2440
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Elasto-plasticity behavior of IF steel sheet with planar anisotropy and its macro-meso modeling2012
- Author(s)
  K. Kitayama, T. Kobayashi, T. Uemori and F. Yoshida
- Journal Title
  
  ISIJ International
  
  Volume: 52 Pages: 735-742
- NAID
  10030975136
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Constitutive equations of stress-strain responses of aluminum sheet under stress path changes2012
- Author(s)
  Takeshi Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 535-536 Pages: 101-104
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] 面内異方性を持つIF鋼板の弾塑性特性とそのマクロ-メゾモデリング2011
- Author(s)
  北山功志郎, 小林匠, 上森武, 吉田総仁
- Journal Title
  
  鉄と鋼
  
  Volume: 97 Pages: 221-229
- NAID
  130000673746
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 面内異方性を持つIF鋼板の弾塑性特性とそのマクロ・メゾモデリング2011
- Author(s)
  北山功志郎,小林匠,上森武,吉田総仁
- Journal Title
  
  鉄と鋼
  
  Volume: 97-4 Pages: 221-229
- NAID
  130000673746
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Experimental observation of elasto-plasticity behavior of type 5000 and 6000 aluminum alloy sheets2011
- Author(s)
  S. Tamura, T. Uemori, F. Yoshida
- Journal Title
  
  Materials Transactions
  
  Volume: 52-5 Pages: 868-875
- NAID
  10028251640
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Description of Planer Anisotropy and Cyclic Plasticity Behavior of Aluminum Sheet Based on Crystal Plasticity Theory2011
- Author(s)
  K. Kobayashi, K. Kitayama, T. Uemori and F. Yoshida
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 117-119 Pages: 1397-1401
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Changes2011
- Author(s)
  Takeshi Uemori
- Journal Title
  
  Steel Research International
  
  Volume: Special issue Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Experimental observation of elasto-plasticity behavior of type 5000 and 60000 aluminum alloy sheets2011
- Author(s)
  S. Tamura, S. Sumikawa, T. Uemori, H. Hamasaki, F. Yoshida
- Journal Title
  
  Materials Transaction
  
  Volume: 52 Pages: 868-875
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Description of planar anisotropyand cyclic plasticity behavior of aluminumsheet based on crystal plasticity2011
- Author(s)
  T. Kobayashi, K. Kitayama, T. Uemori, F. Yoshida
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 117-119 Pages: 1397-1401
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 5000系および6000系アルミニウム合金板における弾塑性挙動の実験観察2011
- Author(s)
  田村翔平,上森武,吉田総仁
- Journal Title
  
  軽金属
  
  Volume: 61-6 Pages: 255-261
- NAID
  130004482054
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T.Uemori, F.Yoshida et.al,他5名
- Journal Title
  
  Steel Research International
  
  Volume: Special issue Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] 5000系および6000系アルミニウム合金板における弾塑性挙動の実験観察2011
- Author(s)
  田村翔平, 澄川智史, 上森武, 濱崎洋, 吉田総仁
- Journal Title
  
  軽金属
  
  Volume: 61 Pages: 255-261
- NAID
  130004482054
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Description of planar anisotropy and cyclic plasticity behavior of aluminum sheet based on crystal plasticity2011
- Author(s)
  T.Kobayashi, K.Kitayama, T.Uemori, F.Yoshida
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 117-119 Pages: 1397-1401
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T.Uemori, S.Sumikawa, S.Tamura, H.Hamasaki, T.Naka, R.Hino, F.Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 10^<th> ICTP Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 面内異方性を持つIF鋼板の弾塑性特性とそのマクローメゾモデリッグ2011
- Author(s)
  北山功志郎, 小林匠, 上森武, 吉田総仁
- Journal Title
  
  鉄と鋼
  
  Volume: 97 Pages: 221-229
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Influence of Yield Functions on Parameters of the Yoshida-Uemori Model2011
- Author(s)
  H. Kano, T. Uemori, and F. Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: Special issue Pages: 830-835
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760121
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T. Uemori, S. Sumikawa, S. Tamura, H. Hamasaki, T. Naka, R. Hino, F. Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 10 Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Prediction of fracture for high strength steel sheets under stretch bending.2010
- Author(s)
  T.Naka, T.Kurose, T.Uemori, et al.
- Journal Title
  
  Steel Research International
  
  Volume: 81 Pages: 841-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Prediction of fracture for high strength steelsheets under stretch bending2010
- Author(s)
  Tetsuo Naka, Takanori Kurose, TakeshiUemori, Ryutaro Hino and Fusahito Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 81-9 Pages: 841-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Prediction of fracture for high strength steel sheets under stretch bending2010
- Author(s)
  Tetsuo Naka, Takanori Kurose, Takeshi Uemori, Ryutaro Hino, Fusahito Yoshida
- Journal Title
  
  Steel Research International 81-9
  
  Pages: 841-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Elasto-Plasticity Behavior of High Strength Steel Sheet in Biaxial Stress Path Change.2010
- Author(s)
  T.Uemori, et al.
- Journal Title
  
  Materials Transaction
  
  Volume: 51 Pages: 1814-1818
- NAID
  10026695336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Springback simulation of high strength steel sheets calculated by Yoshida-Uemorimodel.2010
- Author(s)
  T.Uemori, et al.
- Journal Title
  
  Steel Research International
  
  Volume: 81 Pages: 825-828
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Elasto-Plasticity Behavior of High Strength Steel Sheet in Biaxial Stress Path Change2010
- Author(s)
  Takeshi Uemori, Tohru Kuramitsu, Yuji Mito, Ryutaro Hino, Tetsuo Naka, Fusahito Yoshida
- Journal Title
  
  Materials Transactions 51-10
  
  Pages: 1814-1818
- NAID
  10026695336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Elasto-Plasticity Behavior of High Strength Steel Sheet in Biaxial Stress Path Change2010
- Author(s)
  Takeshi Uemori, Tohru Kuramitsu, Yuji Mito, Ryutaro Hino, Tetsuo Naka and Fusahito Yoshida
- Journal Title
  
  Materials Transactions
  
  Volume: 51-10 Pages: 1814-1818
- NAID
  10026695336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 二軸応力経路が変化する場合の高張力鋼板の弾塑性変形挙動2009
- Author(s)
  上森武, 倉光徹, 三登悠司, 日野隆太郎, 中哲夫, 吉田総仁
- Journal Title
  
  塑性と加工 50
  
  Pages: 39-43
- NAID
  10029738418
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] FLD of AZ31 Sheet Under Warm Stretching And Its Prediction2008
- Author(s)
  Naka, T, Nakayama. Y, Uemori, T
- Journal Title
  
  International Journal of Modern Physics B 2 2
  
  Pages: 6010-6015
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Plastic Deformation Behavior of High Strength Steel Sheet Under Non-Proportional Loading And Its Modeling2008
- Author(s)
  Uemori, T, Mito, Y, Sumikawa
- Journal Title
  
  International Journal of Modern Physics B 2 2
  
  Pages: 5394-5399
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Plastic Deformation Behavior of High Strength Steel Sheet under Non-proportional Loading and Its Modeling2007
- Author(s)
  T. Uemori, T. Kuramitsu, E. Hino, T. Naka, F. Yoshida
- Journal Title
  
  Key Engineering Materials 340-341
  
  Pages: 895-900
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17760109
[Journal Article] 変形履歴を受けた高張力鋼板の異方性2005
- Author(s)
  倉光徹, 市丸隆志, 上森武, 中哲夫, 吉田総仁
- Journal Title
  
  日本機械学会中国四国支部第43期総会・講演会講演論文集 No.055-1
  
  Pages: 41-42
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] Effect of Strain-Rate and Temperature on Yield Locus for 5083 Aluminum Alloy Sheet2004
- Author(s)
  T.Naka, Y.Nakayama, T.Uemori, R.Hino, F.Yoshida
- Journal Title
  
  Key Engineering Materials 274-276
  
  Pages: 937-942
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] AZ31板の降伏挙動におよぼす温度とひずみ速度の影響2004
- Author(s)
  中哲夫, 廣中智久, 高津正秀, 東健司, 上森武, 吉田総仁
- Journal Title
  
  第35回塑性加工春季講演会講演論文集
  
  Pages: 123-124
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] 高張力鋼板の繰返し塑性変形挙動とその構成モデル2003
- Author(s)
  上森武
- Journal Title
  
  第54回塑性加工連合講演会
  
  Pages: 5-6
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Presentation] 純チタン細線の引張特性に及ぼす結晶粒径の影響についての検討2024
- Author(s)
  田中洸多，坂本惇司，多田直哉，上森武，大石滉葉
- Organizer
  日本機械学会中国四国支部第62期総会・講演会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 純チタン薄膜試験片の繰返し引張試験における除荷後の結晶方位変化と表面高度変化の関係2024
- Author(s)
  大橋弘晃，多田直哉，上森武，坂本惇司
- Organizer
  日本機械学会中国四国支部第62期総会・講演会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] Effect of artificial defect on tensile properties of thin titanium alloy wire2023
- Author(s)
  Koyo OISHI, Junji SAKAMOTO, Naoya TADA, Takeshi UEMORI
- Organizer
  The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023 (ATEM-iDICs '23)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 円孔付き純チタン平板試験片の弾性および塑性域引張における結晶粒中心と粒界近傍における表面高度変化2023
- Author(s)
  緒方隆太，多田直哉，上森武，坂本惇司
- Organizer
  日本機械学会M&M2023材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 異周速圧延を受ける純アルミニウムの集合組織形成に関する結晶塑性均質化有限要素解析2023
- Author(s)
  井木祐輔，上森武，多田直哉，坂本惇司
- Organizer
  塑性加工学会，第74回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-23K03592
[Presentation] 結晶塑性有限要素解析による多結晶純チタン薄膜の活動すべり系予測2023
- Author(s)
  土居雅利，上森武，多田直哉，坂本惇司
- Organizer
  日本機械学会中国四国支部第61期総会・講演会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] Prediction of active slip system for commercially pure titanium sheet by crystal plasticity finite element analysis2023
- Author(s)
  Takeshi UEMORI, Naoya TADA, Junji SAKAMOTO, Masatoshi DOI
- Organizer
  Conference 2023 (ATEM-iDICs '23)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K03592
[Presentation] 純チタン薄膜試験片の段階的荷重増加繰返し引張試験における除荷後の結晶方位と表面高度の変化2023
- Author(s)
  大橋弘晃，多田直哉，上森武，坂本惇司
- Organizer
  日本機械学会M&M2023材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 二相組織材料に発生する不均一応力が等塑性仕事曲面に与える影響に関する均質化有限要素解析2023
- Author(s)
  稲毛俊介, 上森武, 多田直哉, 坂本惇司
- Organizer
  日本塑性加工学会
- Data Source
  KAKENHI-PROJECT-19K05099
[Presentation] Prediction of active slip system for commercially pure titanium sheet by crystal plasticity finite element analysis2023
- Author(s)
  Takeshi UEMORI, Naoya TADA, Junji SAKAMOTO, Masatoshi DOI
- Organizer
  The Advanced Technology in Experimental Mechanics and International DIC Society Joint Conference 2023 (ATEM-iDICs '23)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] Ti-6Al-4V平滑試験片の引張試験における微視的塑性変形から破壊へのプロセス2023
- Author(s)
  丸一紘大，上森武，多田直哉，坂本惇司，緒方隆太
- Organizer
  日本機械学会中国四国支部第61期総会・講演会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 結晶塑性有限要素解析による多結晶純チタン薄膜の活動すべり系予測2023
- Author(s)
  土居雅利, 上森武, 多田直哉, 坂本惇司
- Organizer
  日本機械学会中国四国支部
- Data Source
  KAKENHI-PROJECT-19K05099
[Presentation] Microscopic Deformation of Thin Sheet of Polycrystalline Pure Titanium Under Tension2022
- Author(s)
  Naoya TADA, Kentaro KISHIMOTO, Takeshi Uemori, Junji Sakamoto
- Organizer
  ASME PVP Mini Conference in Japan (PMCJ 2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 修正シュミット因子による多結晶純チタン薄膜の活動すべり系予測に関する解析的検討2022
- Author(s)
  土居雅利，上森武，多田直哉，坂本惇司
- Organizer
  軽金属学会中国四国支部第14回講演大会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] Slip Activity of Crystal Grains around Notch in Thin Sheet Specimen of Pure Titanium2022
- Author(s)
  Naoya Tada, Takeshi Uemori, Junji Sakamoto
- Organizer
  17th Asia-Pacific Conference on Fracture and Strength and 13th Conference on Structural Integrity and Failure (APCFS/SIF 2022)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 修正シュミット因子による多結晶純チタン薄膜の活動すべり系予測に関する解析的検討2022
- Author(s)
  土居雅利, 上森武, 多田直哉, 坂本惇司
- Organizer
  軽金属学会中国四国支部
- Data Source
  KAKENHI-PROJECT-19K05099
[Presentation] 微視的残留ひずみ測定による多結晶純チタンの引張変形挙動の検討2022
- Author(s)
  松本大樹，多田直哉，坂本惇司，上森武，石丸恵太
- Organizer
  日本機械学会中国四国支部第60期総会・講演会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 純チタン薄膜試験片の引張における不均一弾性応力分布と活動すべり系の関係2022
- Author(s)
  石丸恵太，多田直哉，坂本惇司，上森武，松本大樹
- Organizer
  日本機械学会中国四国支部第60期総会・講演会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 多結晶純チタン薄膜の引張における各結晶粒のすべり活動条件に関する検討2022
- Author(s)
  多田直哉，上森武，坂本惇司，石丸恵太
- Organizer
  日本機械学会M&M2022材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 疲労初期段階の表面高度変化を用いた純チタンの疲労き裂発生箇所の予測の検討2021
- Author(s)
  彭安瑞，多田直哉，坂本惇司，上森武
- Organizer
  軽金属学会中国四国支部第13回講演大会
- Data Source
  KAKENHI-PROJECT-21H01214
[Presentation] 切欠きを有する純チタン薄膜試験片の引張に伴う結晶粒のすべり変形挙動に関する検2021
- Author(s)
  石田諭史，多田直哉，上森武，坂本惇司，石丸恵太
- Organizer
  日本機械学会中国四国支部第59期総会・講演会
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 結晶塑性理論を用いたアルミニウム圧延集合組織の解析的検討2021
- Author(s)
  田邉拓也，上森武，多田直哉，坂本惇司，三井孔佑，小野寺光輝
- Organizer
  日本機械学会中国四国支部第 5 9 期総会・講演会
- Data Source
  KAKENHI-PROJECT-19K05099
[Presentation] 面内反転負荷を受ける Ti-6242 合金の結晶塑性均質化有限要素解析2020
- Author(s)
  三井孔佑, 上森武, 多田直哉, 坂本惇司
- Organizer
  日本機械学会 2020年度年次大会
- Data Source
  KAKENHI-PROJECT-19K05099
[Presentation] 多結晶純チタンの繰返し引張後の微視的残留応力とすべり線の関係2020
- Author(s)
  松本大樹，多田直哉，上森武，坂本惇司
- Organizer
  日本材料学会第6回材料WEEK材料シンポジウム
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] ステンレス薄板のSD効果に関する実験的検討2020
- Author(s)
  柴井宏治，上森武，多田直哉，坂本惇司
- Organizer
  日本鉄鋼協会第179回春季講演大会
- Data Source
  KAKENHI-PROJECT-17K06856
[Presentation] Microscopic Deformation of Thin Sheet of Polycrystalline Pure Titanium Under Tension2020
- Author(s)
  Naoya TADA, Kentaro KISHIMOTO, Takeshi Uemori, Junji Sakamoto
- Organizer
  ASME 2020 Pressure Vessels and Piping Conference (PVP2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 結晶塑性理論を用いたアルミニウム圧延集合組織の解析的検討2020
- Author(s)
  田邉拓也, 上森武, 多田直哉, 坂本惇司, 三井孔佑, 小野寺光輝
- Organizer
  日本機械学会中国四国支部第59期総会・講演会
- Data Source
  KAKENHI-PROJECT-19K05099
[Presentation] 純チタン薄膜の引張変形に伴う表面と裏面の微視的高度分布の関係2019
- Author(s)
  岸本健太郎，多田直哉，上森武，坂本惇司
- Organizer
  日本材料学会第5回材料WEEK材料シンポジウム
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 590MPa級DP鋼の繰返し引張－圧縮試験とその構成モデル2019
- Author(s)
  中本浩聖，上森武，多田直哉，坂本惇司，早川邦夫
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-17K06856
[Presentation] 低荷重負荷による表面性状変化を用いた内在欠陥の検出2019
- Author(s)
  坂本惇司，國安隼人，多田直哉，上森武
- Organizer
  日本機械学会材料力学部門M&M若手シンポジウム2019
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] Slip Deformation of Crystal Grains in Semi-Circular Notched Thin Sheet Specimen of Pure Titanium during Tensile Test2019
- Author(s)
  Takashi Ishida, Naoya Tada, Takeshi Uemori, Junji Sakamoto
- Organizer
  International Conference on Advanced Technology in Experimental Mechanics 2019 (ATEM ‘19)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 多結晶純チタンの引張りにおける結晶方位変化を考慮に入れた微視的すべり変形の評価2019
- Author(s)
  佐藤宏樹，多田直哉，上森武，坂本惇司
- Organizer
  日本金属学会2019年春期(第164回)講演大会
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 高張力鋼板の面内繰返し応力－ひずみ応答に与えるひずみ速度の影響2018
- Author(s)
  上森武・多田直哉・坂本惇司・中本浩聖・早川邦夫
- Organizer
  日本鉄鋼協会第177回春季講演大会
- Data Source
  KAKENHI-PROJECT-17K06856
[Presentation] Numerical Investigation of Relation between Surface Roughness and Microscopic Interior Deformation in Polycrystalline Pure Titanium Sheet2018
- Author(s)
  Takeshi Uemori, Naoya Tada
- Organizer
  Asia-Pacific Conference on Fracture and Strength 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 純チタン細線の引張試験における変形と直流電位差の関係2018
- Author(s)
  高木佑輔，多田直哉，上森武
- Organizer
  日本機械学会2018年度年次大会
- Data Source
  KAKENHI-PROJECT-18H01337
[Presentation] 圧延・矯正加工がアルミニウム板材の機械的特性に与える影響についての解析的検討2018
- Author(s)
  坂田彰生，多田直哉，上森武，成田忍
- Organizer
  日本機械学会中四国支部，第56期総会講演会
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] 商用有限要素法への高精度材料構成式導入と深絞り加工解析2017
- Author(s)
  坂田彰生，多田直哉，上森武，成田忍，中田隼矢
- Organizer
  日本金属学会・日本鉄鋼協会中国四国支部，中国四国支部第36回若手フォーラム
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] 大ひずみ域での加工硬化を考慮したYoshida-Uemoriモデルによるスプリングバック解析2016
- Author(s)
  上森武，坂田彰生，成田忍，吉田総仁，中田隼矢，多田直哉 
- Organizer
  日本塑性加工学会第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] 大ひずみ域における加工発展を考慮したYoshida-Uemoriモデルによる高張力鋼板のスプリングバック解析 2016
- Author(s)
  坂田彰生，上森武，多田直哉，中田隼矢
- Organizer
  日本材料学会「材料シンポジウム」ワークショップ
- Place of Presentation
  京都テルサ
- Year and Date
  2016-10-11
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] 鍛造シミュレーションにおける見かけのヤング率の塑性ひずみ依存性とその影響 2016
- Author(s)
  成田忍，上森武，早川邦夫
- Organizer
  日本塑性加工学会第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] 複合硬化則の多段鍛造成形シミュレーションの適用に関する検討2015
- Author(s)
  成田忍，上森武，早川邦夫，久保田義弘
- Organizer
  第66回塑性加工連合講演会
- Place of Presentation
  いわき市文化センター
- Year and Date
  2015-10-29
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] 均質化結晶塑性有限要素法によるアルミニウム合金の変形解析と成形解析への応用2015
- Author(s)
  上森武，多田直哉，中田隼矢，藤井健斗，吉田総仁，瀧澤英男，成田忍
- Organizer
  軽金属学会　第129回秋期大会
- Place of Presentation
  日本大学津田沼キャンパス
- Year and Date
  2015-11-21
- Data Source
  KAKENHI-PROJECT-15K05737
[Presentation] Description of Anisotropy and the Bauschinger effect on Various Types of Steel Sheets2013
- Author(s)
  吉田総仁,濱崎洋,上森武
- Organizer
  The 11th International Conference on Numerical Methods in Industrial Forming Processes
- Place of Presentation
  IMR Conference Hall(中国)
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 鋼板の引張及び単純せん断の結晶塑性解析2013
- Author(s)
  三宅　弘人，吉田　総仁，上森　武，磯貝　栄志，上西　朗弘，末廣　正芳
- Organizer
  日本塑性加工学会
- Place of Presentation
  大阪大学
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] Springback of Aluminum Alloy Sheet Metal and its Modeling2013
- Author(s)
  上森武
- Organizer
  16th International conference on advances in materials & processing technolovies
- Place of Presentation
  園山大飯店(台湾)
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 矯正工程による残留応力を考慮した板成形有限要素解析2013
- Author(s)
  早川邦夫，上森武，坂井田喜久
- Organizer
  （社）日本鉄鋼協会
- Place of Presentation
  東京電機大学（東京都）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] Description of Anisotropy and the Bauschinger Effect on Various Types of Steel Sheets2013
- Author(s)
  吉田　総仁，濱崎　洋，上森　武
- Organizer
  The 11th International Conference on Numerical Methods in Industrial Forming Processes
- Place of Presentation
  IMR Conference Hall（中国）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 高張力鋼板の面内繰返し変形挙動実験観察とそのモデル化2013
- Author(s)
  上森武，早川邦夫
- Organizer
  （社）日本鉄鋼協会
- Place of Presentation
  東京電機大学（東京都）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] マグネシウム合金板の温間変形特性とそのモデル化2013
- Author(s)
  細川　翔平，片平　卓志，上森　武，中　哲夫，高津　正秀，足立　大樹，吉田　総仁
- Organizer
  日本塑性加工学会
- Place of Presentation
  大阪大学
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 複素数階微分法による高延性接着材の弾粘塑性変形挙動有限要素解析2013
- Author(s)
  上森武
- Organizer
  日本機械学会中国四国支部第51回総会
- Place of Presentation
  高知工科大学
- Year and Date
  2013-03-08
- Data Source
  KAKENHI-PROJECT-22560129
[Presentation] 鋼板の引張及び単純せん断の結晶塑性解析2013
- Author(s)
  三宅弘人,吉田総仁,上森武,磯貝栄志,上西朗弘,末廣正芳
- Organizer
  (社)日本塑性加工学会論文集
- Place of Presentation
  大阪大学
- Year and Date
  2013-11-02
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] マグネシウム合金板の温間変形特性とそのモデル化2013
- Author(s)
  細川翔平,片平卓志,上森武,中哲夫,高津正秀,足立大樹,吉田総仁
- Organizer
  (社)日本塑性加工学会論文集
- Place of Presentation
  大阪大学
- Year and Date
  2013-11-02
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] Springback of Aluminum Alloy Sheet Metal and its Modeling2013
- Author(s)
  上森　武
- Organizer
  16th INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS & PROCESSING TECHNOLOGIES
- Place of Presentation
  圓山大飯店（台湾）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 吉田6次降伏関数を用いたアルミ合金及び鋼板の絞りしごきの成形性評価2012
- Author(s)
  上森武，麻寧緒，吉田総仁
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  北九州国際会議場（福岡県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 多結晶塑性理論によるアルミニウム合金の降伏曲面とバウシンガー効果の検討2012
- Author(s)
  上森武，北山功志郎，小林匠，吉田総仁
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ（石川県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 応力テンソルの線形変換と不変量による異方性降伏関数の表現2012
- Author(s)
  吉田総仁，濱崎洋，上森武
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ（石川県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 析出硬化型マグネシウム合金の結晶方位ランダム化とプレス成形性2012
- Author(s)
  高津正秀,山川尊史,沼倉宏,中哲夫,上森武,吉田総仁
- Organizer
  (社)日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 高張力鋼板の成形シミュレーションに及ぼす異方性降伏関数の影響2012
- Author(s)
  平野達也,田村翔平,岡村一男,鈴木利哉,上森武,濱崎洋,吉田総仁
- Organizer
  (社)日本塑性加工学会論文集
- Place of Presentation
  コマツウェイ総合研修センタ
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 多結晶塑性理論によるアルミニウム合金の降伏曲面とバウシンガー効果の検討2012
- Author(s)
  上森武,北山功志郎,小林匠,吉田総仁
- Organizer
  (社)日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 異方性降伏関数とバウシンガー効果を考慮した高張力鋼板の成形シミュレーション2012
- Author(s)
  上森武,赤木宏行,平野達也,麻寧緒,吉田総仁
- Organizer
  (社)日本塑性加工学会論文集
- Place of Presentation
  コマツウェイ総合研修センタ
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 異方性降伏関数とバウシンガー効果を考慮した高張力鋼板の成形シミュレーション2012
- Author(s)
  上森武，赤木宏行，平野達也，麻寧緒，吉田総仁
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ（石川県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 吉田6次降伏関数を用いたアルミニウム合金及び鋼板の絞りしごきの成形性評価2012
- Author(s)
  上森武
- Organizer
  第63回塑性加工連合講演会
- Place of Presentation
  北九州国際会議場
- Year and Date
  2012-11-04
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] 結晶塑性理論によるアルミニウム合金の降伏曲面とバウシンガー効果の検証2012
- Author(s)
  上森武，北山功志郎，小林匠，吉田総仁
- Organizer
  （社）軽金属学会
- Place of Presentation
  九州大学（福岡県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 析出硬化型マグネシウム合金の結晶方位ランダム化とプレス成形性(第2報)2012
- Author(s)
  山川尊史,高津正秀,沼倉宏,中哲夫,上森武,吉田総仁
- Organizer
  (社)日本塑性加工学会
- Place of Presentation
  北九州国際会議場
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 吉田6次降伏関数を用いたアルミ合金及び鋼板の絞りしごきの成形性評価2012
- Author(s)
  上森武,麻寧緒,吉田総仁
- Organizer
  (社)日本塑性加工学会
- Place of Presentation
  北九州国際会議場
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 異方性降伏関数とバウシンガー効果を考慮した高張力鋼板の成形シミュレーション2012
- Author(s)
  上森武
- Organizer
  平成24年度塑性加工春季講演会
- Place of Presentation
  コマツウェイ総合研究センタ
- Year and Date
  2012-06-07
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] 応力テンソルの線形変換と不変量による異方性降伏関数の表現2012
- Author(s)
  吉田総仁,濱崎洋,上森武
- Organizer
  (社)日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 結晶塑性理論によるアルミニウム合金の降伏曲面とバウシンガー効果の検証2012
- Author(s)
  上森武,北山功志郎,小林匠,吉田総仁
- Organizer
  (社)軽金属学会講演論文
- Place of Presentation
  北九州国際会議場
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 析出硬化型マグネシウム合金の結晶方位ランダム化とプレス成形性（第2報）2012
- Author(s)
  山川尊史，高津正秀，沼倉宏，中哲夫，上森武，吉田総仁
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  北九州国際会議場（福岡県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 析出硬化型マグネシウム合金の結晶方位ランダム化とプレス成形性2012
- Author(s)
  高津正秀，山川尊史，沼倉宏，中哲夫，上森武，吉田総仁
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ（石川県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] 高張力鋼板の成形シミュレーションに及ぼす異方性降伏関数の影響2012
- Author(s)
  平野達也，田村翔平，岡村一男，鈴木利哉，上森武，濱崎洋，吉田総仁
- Organizer
  （社）日本塑性加工学会
- Place of Presentation
  コマツウェイ総合研修センタ（石川県）
- Data Source
  KAKENHI-PROJECT-23760121
[Presentation] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  上森武
- Organizer
  8^<th> International Conference on Technology of Plasticity (ICTP2011)
- Place of Presentation
  Aachen, Germany
- Year and Date
  2011-09-28
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Influence of Yield Functions on Parameters of the Yoshida-Uemori Model2011
- Author(s)
  上森武
- Organizer
  8^<th> International Conference on Technology of Plasticity (ICTP2011)
- Place of Presentation
  Aachen, Germany
- Year and Date
  2011-09-28
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Springback Analysis of Aluminium Alloy Sheet with Special Reference to Effect of Planar Anisotropy2010
- Author(s)
  T.Uemori
- Organizer
  12th Int.Conf.on Aluminum Alloys
- Place of Presentation
  Yokohama, Japan
- Year and Date
  2010-09-06
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 応力経路変化における弾塑性変形挙動とそのモデル化2009
- Author(s)
  澄川智史, 中村周平, 上森武, 吉田総仁
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 高張力鋼板の形状凍結性に及ぼす引張り力の影響2009
- Author(s)
  今崎友彰, 原田康平, 中哲夫, 濱崎洋, 上森武, 日野隆太郎, 吉田総仁
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 種々の異方性降伏関数と吉田-上森モデルの組合せによるアルミニウム合金板のスプリングバック解析2009
- Author(s)
  澄川智史, 田村翔平, 濱崎洋, 上森武, 麻寧緒, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] マクロ・メゾ弾塑性構成モデルの研究の現状と展望2009
- Author(s)
  吉田総仁, 北山功志郎, 上森武
- Organizer
  日本鉄鋼協会第158回秋季講演大会
- Place of Presentation
  京都大学
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 5000系アルミニウム合金板の二軸引張りおよび繰返し弾塑性変形挙動2009
- Author(s)
  田村翔平, 澄川智史, 上森武, 中哲夫, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 非比例変形を受けたAZ31Mg合金板の成形限界予測2009
- Author(s)
  大出明慶, 植川陽介, 中哲夫, 上森武, 吉田総仁, 高津正秀, 東健司
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 繰り返し負荷試験と最適化手法による金属板材の材料パラメータ同定2009
- Author(s)
  濱崎洋, 上森武, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 応力経路変化を考慮した高張力鋼板の弾塑性変形挙動とそのモデル2007
- Author(s)
  上森武
- Organizer
  日本材料学会
- Place of Presentation
  京大会館
- Year and Date
  2007-11-29
- Data Source
  KAKENHI-PROJECT-17760109
[Presentation] 高張力鋼板の非比例二軸塑性変形挙動の実験観察とそのモデル化2007
- Author(s)
  上森武
- Organizer
  日本材料学会
- Place of Presentation
  名古屋大学
- Year and Date
  2007-05-19
- Data Source
  KAKENHI-PROJECT-17760109
[Presentation] 高張力鋼板の非比例繰返し塑性変形挙動め実験観察と数値モデル2007
- Author(s)
  上森武
- Organizer
  日本塑性加工学会
- Place of Presentation
  名古屋大学
- Year and Date
  2007-05-26
- Data Source
  KAKENHI-PROJECT-17760109
[Presentation] 複素数階微分法による高延性接着材の弾粘塑性変形挙動有限要素解析
- Author(s)
  上森武
- Organizer
  日本機械学会中国四国支部第51回総会・講演会
- Place of Presentation
  高知工科大学
- Data Source
  KAKENHI-PROJECT-22560129
[Presentation] 初期残留応力を考慮した鋼板の繰返し４点曲げに対する有限要素解析
- Author(s)
  早川邦夫・坂井田喜久，上森武
- Organizer
  日本鉄鋼協会　第167回春季講演大会
- Place of Presentation
  東京工業大学（東京都）
- Data Source
  KAKENHI-PROJECT-25420776
[Presentation] 弾粘塑性構成方程式を用いた高延性接着剤の有限要素解析
- Author(s)
  上森武
- Organizer
  日本接着学会第51回年次大会
- Place of Presentation
  明治大学駿河台キャンパス
- Data Source
  KAKENHI-PROJECT-22560129

1. YOSHIDA Fusahito (50016797)

# of Collaborated Projects: 4 results

# of Collaborated Products: 34 results
2. HINO Ryutaro (10283160)

# of Collaborated Projects: 3 results

# of Collaborated Products: 9 results
3. Tada Naoya (70243053)

# of Collaborated Projects: 3 results

# of Collaborated Products: 35 results
4. HAMASAKI Hiroshi (30437579)

# of Collaborated Projects: 2 results

# of Collaborated Products: 12 results
5. Hayakawa Kunio (80283399)

# of Collaborated Projects: 2 results

# of Collaborated Products: 5 results
6. 坂本惇司 (50752052)

# of Collaborated Projects: 2 results

# of Collaborated Products: 26 results
7. TAKIGUCHI Michihiro (10163346)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. YOSHIDA Tetsuya (20182769)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. TOKUDA Taro (20425143)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. FUNAKI Mitsuo (90209148)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. Sakaida Yoshihisa (10334955)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
12. NARITA Shinobu

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results

Uemori Takeshi 上森 武

UEMORI Takeshi 上森 武

上森 タケシ ウエモリ タケシ

Research Projects

Research Products

Co-Researchers

Analytical study of yield point phenomena and work-hardening by dislocation accumulation modelbased on the multi-surface plasticity theoryPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Springback analysis of metallic materials by yield surface taken into into consideration crystal orientation changes with plastic deformationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of integrated forming finite element method with high accurate elasto-plastic material model at large strains and its applicationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Multiscale analysis of plastic anistropy and Bauschinger effect and Its press stamping simulationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

高張力銅板の集合組織と異方性を表現する塑性構成モデルとその数値シミュレーションPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 60 Excellent Invensions in Metal Forming (E. Tekkaya edt.)2015

Author(s)

Total Pages

Publisher

Uemori Takeshi 上森武

UEMORI Takeshi 上森武

上森タケシウエモリタケシ