Shimizu Tetsuhide 清水徹英

… Alternative Names

SHIMIZU Tetsuhide 清水徹英

Less

Researcher Number	70614543
Other IDs	https://orcid.org/0000-0002-7810-3777
Affiliation (Current)	2025: 東京都立大学, システムデザイン研究科, 准教授
Affiliation (based on the past Project Information) *help	2025: 東京都立大学, システムデザイン研究科, 准教授 2021 – 2023: 東京都立大学, システムデザイン研究科, 准教授 2020: 東京都立大学, システムデザイン学部, 准教授 2012 – 2019: 首都大学東京, システムデザイン学部, 助教 2014: 首都大学東京, システムデザイン研究科, 助教 2012: 首都大学東京, システムデザイン研究科, 助教
Review Section/Research Field	Principal Investigator Material processing/Microstructural control engineering / Basic Section 14030:Applied plasma science-related / Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments Except Principal Investigator Material processing/Microstructural control engineering / Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments
Keywords	Principal Investigator イオンエネルギー / イオン / HiPIMS / 炭窒化ホウ素膜 / XPS / FTIR / イオン質量分析 / イオン化物理蒸着 / 炭化ホウ素 / ボールオンディスク試験 … More / マイクロ金型 / ダイヤモンド状炭素膜 / 表面テクスチャリング / バースト信号 / バイポーラパルス / HIPIMS / プラズマ発光分光分析 / 残留応力 / 自己イオン衝撃 / イオン化PVD / ホウ素イオン / 立方晶相 / BCN薄膜 / イオン運動エネルギー / プラズマ発光分光法 / バイポーラ型HiPIMS / 立方晶窒化ホウ素 / パルスプラズマ / エネルギアナライザ型質量分析 / イオン輸送 / グリッドプローブ / マグネトロン磁場 / イオン化率 / プラズマ電位 / グリッドレスプローブ / エミッシブプローブ / 運動量変換 / t-BN相 / 炭化窒化ホウ素 / 化学結合状態 / イオンエネルギー分布 / イオン流束 / 高靱性化 / スパッタリング / パルス周波数 / 反応性スパッタリング / ピーク電流密度 / パルス幅 / イオン種 / 遅延印加時間 / 基板パルスバイアス電圧 / 靭性 / 硬質膜 / 基板パルスバイアス / 質量分析 / マイクロ加工 / イオン化物理蒸着法 / 耐摩耗性 / ヘテロ構造 / ダイヤモンド状炭素 / ドライ加工 / 超硬 / ダイアモンドライクカーボン / テクスチャリング / 表面設計 / 摩耗粉 / その場観察 / トライボロジー / 精密プレス加工 … More Except Principal Investigator マイクロ金属加工 / マイクロトライボ特性 / 高液圧成形 / 長尺マイクロ管 / 不均質有限要素解析 / 寸法効果 / その場観察 / 材料流動特性 / 液圧成形 / 長尺微細管 / 塑性変形 / 金属成形加工 / 精密部品加工 / 材料加工・処理 / モデル化 / SEM-EBSD分析 / 素材変形促進 / 超音波振動 / トライボロジー / 成膜プロセス / ナノ材料 / 薄膜プロセス・メッキ・配線 / テクスチャードフィラメント / 配線 / メッキ / チタンの鍛造 / 金型コーティング / hBN/SiCナノ積層膜 / HFCVD / 薄膜プロセス / 体積膨張 / 金属粉未酸化 / 粉末プロセス・粉末冶金 / マイクロ・ナノデバイス / 金属粉末酸化 / マイクロ投薬システム / 表面転写 / 金属箔材 / 高真空プレス装置 / ナノ触媒 / 真空プレス装置 / 選択的CVD / 転写プリンティング / プレス成形 / スケール横断加工 / 超塑性 / 結晶粒微細化 / 酸化膜 / 加工熱処理 / 機械的性質 / 多パス / 組織制御 / ねじり / 外径変動 / 酸化 / 熱援用引抜き / 加工条件 / 外径精度 / 表面あれ / マルチパス / 引抜き限界 / マイクロチューブ / 熱援用加工 / ダイレス引抜き Less

多元加速イオン流束の時分割制御による超高靭性X2BC相成長機構の解明Principal Investigator
- Principal Investigator
  
  清水徹英
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 14030:Applied plasma science-related
- Research Institution
  Tokyo Metropolitan University
微細管の高液圧成形における材料流動およびマイクロトライボ現象とその寸法効果解明
- Principal Investigator
  
  真鍋健一
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Tokyo Metropolitan University
Residual stress control of boroncarbon nitride coatings by bipolar-HiPIMSPrincipal Investigator
- Principal Investigator
  
  Shimizu Tetsuhide
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Tokyo Metropolitan University
Mechanism investigation and modeling of material deformation enhancement in micro forming with vibration energy assistance
- Principal Investigator
  
  Yang Ming
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Tokyo Metropolitan University
Understanding the growth mechanism of boron carbon nitride films based on the ion transportation behavior in HiPIMS deischargePrincipal Investigator
- Principal Investigator
  
  Shimizu Tetsuhide
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Fund for the Promotion of Joint International Research (Fostering Joint International Research)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Development of die coating system for difficult-to-process materials by forming cBN/hBN mixed phase nanocrystalline boron nitride film
- Principal Investigator
  
  YANG Ming
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Synthesis of high toughness boron carbon nitride coatings by selective ion extraction in HiPIMS plasma dischargePrincipal Investigator
- Principal Investigator
  
  Shimizu Tetsuhide
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Development of an energy free drug delivery system using oxidative expansion of Fe powder
- Principal Investigator
  
  Yang Ming
- Project Period (FY)
  2015 – 2016
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Development of Highly-Durable Surface Textured Forming Die by In-Plane Hetero-Structuring of Diamond Like Carbon FilmsPrincipal Investigator
- Principal Investigator
  
  Shimizu Tetsuhide
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Development of Multi-Scale Forming Technology for Fabrication of a metallic micro device with nano catalyst functional surface
- Principal Investigator
  
  YANG Ming
- Project Period (FY)
  2013 – 2014
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Tokyo Metropolitan University
Fabrication of high grade medical microtubes with microstructure control in superplastic dieless drawing process
- Principal Investigator
  
  MANABE Ken-ichi
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University
Mesoscopic tribological control in microforming by tailored surface texturingPrincipal Investigator
- Principal Investigator
  
  SHIMIZU Tetsuhide
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tokyo Metropolitan University

All 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 Other

All Journal Article Presentation Book Patent

[Book] Metal Forming-Process, Tools, Design, Chpater 5- Imapct of Surface Topography of Tools and Materials in Micro Sheet Metal Forming2012
- Author(s)
  Tetsuhide Shimizu, Ming Yang, Ken-ichi Manabe
- Total Pages
  22
- Publisher
  INTECH
- Data Source
  KAKENHI-PROJECT-24760609
[Book] Metal Forming-Process, Tools, Design, Chapter 5- Impact of Surface Topography of Tools and Materials in Micro Sheet Metal Forming2012
- Author(s)
  Tetsuhide Shimizu, Ming Yang, Ken-ichi Manabe
- Publisher
  INTECH
- Data Source
  KAKENHI-PROJECT-24760609
[Journal Article] Industrial application potential of high power impulse magnetron sputtering for wear and corrosion protection coatings2023
- Author(s)
  Vetter Joerg、Shimizu Tetsuhide、Kurapov Denis、Sasaki Tomoya、Mueller Juergen、Stangier Dominic、Esselbach Markus
- Journal Title
  
  Journal of Applied Physics
  
  Volume: 134 Issue: 16 Pages: 160701-160701
- DOI
  10.1063/5.0159292
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Journal Article] Modeling of high power impulse magnetron sputtering discharges with tungsten target2022
- Author(s)
  Babu Swetha Suresh、Rudolph Martin、Lundin Daniel、Shimizu Tetsuhide、Fischer Joel、Raadu Michael A、Brenning Nils、Gudmundsson Jon Tomas
- Journal Title
  
  Plasma Sources Science and Technology
  
  Volume: 31 Issue: 6 Pages: 065009-065009
- DOI
  10.1088/1361-6595/ac774a
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Journal Article] Experimental verification of deposition rate increase, with maintained high ionized flux fraction, by shortening the HiPIMS pulse2021
- Author(s)
  Shimizu T、Zanska M、Villoan R P、Brenning N、Helmersson U、Lundin Daniel
- Journal Title
  
  Plasma Sources Science and Technology
  
  Volume: 30 Issue: 4 Pages: 045006-045006
- DOI
  10.1088/1361-6595/abec27
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136, KAKENHI-PROJECT-21H01674
[Journal Article] Low temperature growth of stress-free single phase α-W films using HiPIMS with synchronized pulsed substrate bias2021
- Author(s)
  Shimizu Tetsuhide、Takahashi Kazuki、Boyd Robert、Viloan Rommel Paulo、Keraudy Julien、Lundin Daniel、Yang Ming、Helmersson Ulf
- Journal Title
  
  Journal of Applied Physics
  
  Volume: 129 Issue: 15 Pages: 155305-155305
- DOI
  10.1063/5.0042608
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136, KAKENHI-PROJECT-21H01674
[Journal Article] Evolution of acoustic softening effect on ultrasonic-assisted micro/meso-compression behavior and microstructure2020
- Author(s)
  Hu Jun、Shimizu Tetsuhide、Yoshino Tomoaki、Shiratori Tomomi、Yang Ming
- Journal Title
  
  Ultrasonics
  
  Volume: 107 Pages: 106107-106117
- DOI
  10.1016/j.ultras.2020.106107
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02481
[Journal Article] HiPIMS法によるAlTiN硬質膜の形成とそのプレス金型への適用2020
- Author(s)
  清水徹英
- Journal Title
  
  メカニカル・サーフェス・テック
  
  Volume: 6月号 Pages: 30-32
- Data Source
  KAKENHI-PROJECT-17KK0136
[Journal Article] Effect of Peak Current Density on Inner-wall Deposition of Ti Films by High-power Impulse Magnetron Sputtering2020
- Author(s)
  小宮英敏, 寺西義一, シャアアナ, 楊明, 清水徹英
- Journal Title
  
  Vacuum and Surface Science
  
  Volume: 63 Issue: 8 Pages: 404-412
- DOI
  10.1380/vss.63.404
- NAID
  130007886643
- ISSN
  2433-5835, 2433-5843
- Year and Date
  2020-08-10
- Language
  Japanese
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136
[Journal Article] 大電力パルススパッタリング技術とそのパルスパターンの多様性2020
- Author(s)
  清水徹英
- Journal Title
  
  日本材料科学会誌「材料の科学と工学」
  
  Volume: 57 Pages: 6-9
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17KK0136
[Journal Article] Investigation on Material Deformation Characteristics of Ultrasound-assisted Microcompression with Dynamic Force Sensing Technology2019
- Author(s)
  Hu Jun、Shimizu Tetsuhide、Yang Ming
- Journal Title
  
  Sensors and Materials
  
  Volume: 31 Issue: 10 Pages: 3111
- DOI
  10.18494/SAM.2019.2359
- ISSN
  0914-4935, 2435-0869
- Year and Date
  2019-10-25
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19H02481
[Journal Article] New Advancement of Ionized Physical Vapor Deposition Towards Realization of Highly Durable Forming Die2019
- Author(s)
  清水徹英
- Journal Title
  
  PLASTOS
  
  Volume: 2 Issue: 19 Pages: 421-425
- DOI
  10.32277/plastos.2.19_421
- NAID
  130007683398
- ISSN
  2433-8826
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17KK0136
[Journal Article] Growth of semi-coherent Ni and NiO dual-phase nanoparticles using hollow cathode sputtering2019
- Author(s)
  Ekeroth Sebastian、Ikeda Shuga、Boyd Robert D.、Shimizu Tetsuhide、Helmersson Ulf
- Journal Title
  
  Journal of Nanoparticle Research
  
  Volume: 21 Issue: 2 Pages: 1-8
- DOI
  10.1007/s11051-019-4479-4
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Surface Texturing of Die Surface toward the Realization of Dry Forming Operation2018
- Author(s)
  清水徹英
- Journal Title
  
  JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS
  
  Volume: 63 Issue: 7 Pages: 474-479
- DOI
  10.18914/tribologist.63.07_474
- NAID
  130007404845
- ISSN
  0915-1168, 2189-9967
- Year and Date
  2018-07-15
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Low temperature (Ts/Tm<0.1) epitaxial growth of HfN/MgO(001) via reactive HiPIMS with metal-ion synchronized substrate bias2018
- Author(s)
  Villamayor Michelle Marie S.、Keraudy Julien、Shimizu Tetsuhide、Viloan Rommel Paulo B.、Boyd Robert、Lundin Daniel、Greene Joseph E.、Petrov Ivan、Helmersson Ulf
- Journal Title
  
  Journal of Vacuum Science & Technology A
  
  Volume: 36 Issue: 6 Pages: 061511-061511
- DOI
  10.1116/1.5052702
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Phase separation within NiSiN coatings during reactive HiPIMS discharges: A new pathway to grow Ni x Si nanocrystals composites at low temperature2018
- Author(s)
  Keraudy J.、Boyd R.D.、Shimizu T.、Helmersson U.、Jouan P.-Y.
- Journal Title
  
  Applied Surface Science
  
  Volume: 454 Pages: 148-156
- DOI
  10.1016/j.apsusc.2018.05.061
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Pressure dependence of (Ti, Al)N film growth on inner walls of small holes in high-power impulse magnetron sputtering2017
- Author(s)
  T. Shimizu, H. Komiya, Y. Teranishi, K. Morikawa,H. Nagasaka, M.Yang
- Journal Title
  
  Thin Solid Films
  
  Volume: 624 Pages: 189-196
- DOI
  10.1016/j.tsf.2016.09.041
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Variation of local chemical compositions of (Ti, Al)N films on inner wall of small hole deposited by high-power impulse magnetron sputtering2017
- Author(s)
  Komiya Hidetoshi、Shimizu Tetsuhide、Teranishi Yoshikazu、Morikawa Kazuo、Yang Ming
- Journal Title
  
  Thin Solid Films
  
  Volume: 644 Pages: 99-105
- DOI
  10.1016/j.tsf.2017.10.056
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Transition Mode Control in Reactive High-Power Impulse Magnetron Sputtering (R-HiPIMS)2017
- Author(s)
  清水徹英、ミシェルビラマヨア、ジュリアンケラウディ、ダニエルルンディン、ウルフヘルマーソン
- Journal Title
  
  Journal of the Vacuum Society of Japan
  
  Volume: 60 Issue: 9 Pages: 346-351
- DOI
  10.3131/jvsj2.60.346
- NAID
  130006077260
- ISSN
  1882-2398, 1882-4749
- Language
  Japanese
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] In-situ observation of lubricant flow on laser textured die surface in sheet metal forming2017
- Author(s)
  Vorholt Jochen、Shimizu Tetsuhide、Kobayashi Hiroyuki、Heinrich Lukas、Flosky Hendrik、Vollertsen Frank、Yang Ming
- Journal Title
  
  Procedia Engineering
  
  Volume: 207 Pages: 2209-2214
- DOI
  10.1016/j.proeng.2017.10.983
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] イオン化物理蒸着法における大電力パルスマグネトロンスパッタリング（HiPIMS）技術の特有性2017
- Author(s)
  清水徹英
- Journal Title
  
  表面技術
  
  Volume: 68 Pages: 712-717
- NAID
  130007493238
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Process stabilization by peak current regulation in reactive high-power impulse magnetron sputtering of hafnium nitride2016
- Author(s)
  T. Shimizu, M. Villamayor, D. Lundin, U. Helmersson
- Journal Title
  
  Journal of Physics D: Applied Physics
  
  Volume: 49 Issue: 6 Pages: 065202-065202
- DOI
  10.1088/0022-3727/49/6/065202
- Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820327
[Journal Article] Novel processes and related technologies for micro metal forming2016
- Author(s)
  Ming Yang, Tetsuhide Shimizu,
- Journal Title
  
  Journal Materials and Product Technology,
  
  Volume: 54 Pages: 32-44
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Fabrication and evaluation of micro-structured reaction field with vertically aligned carbon nanotubes for micro bio-analysis device2016
- Author(s)
  Y. Suzuki, E. Pabjanczyk-Wlazlo, J. Onoda, T. Shimizu M. Yang
- Journal Title
  
  Mechanical Engineering Journal
  
  Volume: 3 Issue: 2 Pages: 15-00567-15-00567
- DOI
  10.1299/mej.15-00567
- NAID
  130005145828
- ISSN
  2187-9745
- Language
  English
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Growth rate and electrochmical properites of boron-doped diamond films prepared by hot-filament chemical vapor deposition methods2016
- Author(s)
  H. Nagasaka, Y. Teranishi, Y. Kondo, T. Miyamoto, T. Shimizu
- Journal Title
  
  e-Journal of Surface Science and Nanotechnology
  
  Volume: 14 Pages: 53-58
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Influence of Strain Gradient on Springback of Thin Pure Titanium Foils in Microbending Assisted by Resistance Heating2016
- Author(s)
  Qiu Zheng, Tetsuhide Shimizu, Ming Yang
- Journal Title
  
  Key Engineering Materials
  
  Volume: 716 Pages: 215-224
- DOI
  10.4028/www.scientific.net/kem.716.215
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Influence of Servo Motion on Forming Limit of Thin Metallic Foils Using Micro Bulge Test2016
- Author(s)
  Ryo Yamaguchi, Tetsuhide Shimizu, Ming Yang
- Journal Title
  
  Key Engineering Materials
  
  Volume: 716 Pages: 208-214
- DOI
  10.4028/www.scientific.net/kem.716.208
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06801
[Journal Article] Surface Texturing on Micro-Die and In-situ Observation of Its Dry Friction and Wear Behavior2015
- Author(s)
  掛川泰,　清水徹英,　鷺坂芳弘,　楊明
- Journal Title
  
  Journal of the Japan Society for Technology of Plasticity
  
  Volume: 56 Issue: 657 Pages: 891-896
- DOI
  10.9773/sosei.56.891
- NAID
  130005104159
- ISSN
  0038-1586, 1882-0166
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26820327
[Journal Article] Impact of pulse duration in high power impulse magnetron sputtering on the low-temperature growth of wurtzite phase (Ti,Al)N films with high hardness2015
- Author(s)
  T. Shimizu, Y. Teranishi, K. Morikawa, H. Komiya, T. Watanabe, H. Nagasaka, M.Yang:
- Journal Title
  
  Thin Solid Films
  
  Volume: 581 Pages: 39-47
- DOI
  10.1016/j.tsf.2014.11.076
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26820327
[Journal Article] Classification of mesoscopic tribological properties under dry sliding friction for microforming operation2015
- Author(s)
  T. Shimizu, M. Yang, K. Manabe
- Journal Title
  
  Wear
  
  Volume: 330-331 Pages: 49-58
- DOI
  10.1016/j.wear.2015.01.050
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26820327
[Journal Article] Development of microforming process combined with thin film transfer printing2015
- Author(s)
  Kazushi Koshimizu, Qiu Zheng, Tetsuhide Shimizu, Mig Yang
- Journal Title
  
  Manufacturing Review
  
  Volume: 2015,2,6 Pages: 1-6
- DOI
  10.1051/mfreview/2015009
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25630331, KAKENHI-PROJECT-26820327
[Journal Article] Micro-texturing of DLC thin film coatings and its tribological performance under dry sliding friction for microforming operation2014
- Author(s)
  T. Shimizu, T. Kakegawa, M. Yang
- Journal Title
  
  Journal of Procedia Engineering
  
  Volume: 81 Pages: 1884-1889
- DOI
  10.1016/j.proeng.2014.10.251
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26820327
[Journal Article] Plastic anisotropy of ultra-thin rolled phosphor bronze foils and its thickness strain evolution in micro-deep drawing2014
- Author(s)
  T. Shimizu, M.Ogawa, M.Yang, K. Manabe
- Journal Title
  
  Materials & Design
  
  Volume: 56 Pages: 604-612
- DOI
  10.1016/j.matdes.2013.11.048
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760609
[Journal Article] Tribological characterization of boron nitride films against pure-titanium for microforming die application2014
- Author(s)
  Y. Jin, S. Yasuhara, T. Shimizu, M. Yang
- Journal Title
  
  Journal of Procedia Engineering
  
  Volume: 81 Pages: 1909-1914
- DOI
  10.1016/j.proeng.2014.10.255
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26820327
[Journal Article] HIPIMS Deposition of TiAlN Films on Inner Wall of Micro-Dies and Its Applicability in Micro-Sheet Metal Forming2014
- Author(s)
  T. Shimizu, H.Komiya, T.Watanabe, Y. Teranishi, H. Nagasaka, K. Morikawa, M.Yang
- Journal Title
  
  Surface and Coatings Technology
  
  Volume: In Press Pages: 44-51
- DOI
  10.1016/j.surfcoat.2014.02.008
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760609, KAKENHI-PROJECT-26820327
[Journal Article] High-Density Energy Assisted Micro Forming for Fabrication of Metallic Devices2013
- Author(s)
  Ming Yang, Hiroyuki Tanabe, Tetsuhide Shimizu
- Journal Title
  
  Materials and Manufacturing Processes
  
  Volume: In Proof
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760609
[Journal Article] Scale Dependence of Adhesion Behavior under Dry Friction in Progressive Micro-Deep Drawing2013
- Author(s)
  Tetsuhide Shimizu, Yushiro Murashige, Syuhei Iwaoka, Ming Yang and Ken-ichi Manabe
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 7 Issue: 2 Pages: 251-263
- DOI
  10.1299/jmmp.7.251
- NAID
  130003366865
- ISSN
  1880-9871
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24760609
[Patent] 特許権2017
- Inventor(s)
  清水徹英、寺西義一
- Industrial Property Rights Holder
  清水徹英、寺西義一
- Industrial Property Rights Type
  特許
- Filing Date
  2017
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Benefit of utilizing transient ion flux in HiPIMS discharges: Low temperature growth of high-Tm thin films2023
- Author(s)
  Tetsuhide Shimizu, Hao Du, Robert Boyd, Rommel Paulo Viloan, Daniel Lundin, Ming Yang, and Ulf Helmersson
- Organizer
  The 65th Summer Annual Conference of the Korean Vacuum Society(KVS), 10th International Joint Symposium
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] 大電力パルススパッタ(HiPIMS)法による機能性硬質膜開発とその技術動向2023
- Author(s)
  清水徹英
- Organizer
  日本塑性加工学会金型分科会第55回セミナー「EV・カーボンニュートラル時代の軽量化インパクトに対峙する型技術Ⅰ」
- Invited
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] Towards the Growth of Cubic Boron Nitride Coatings by High-power Impulse Magnetron Sputtering2023
- Author(s)
  Tetsuhide Shimizu, Hayate Nagakura, Ivan Fernandez, Jose Antonio Santiago, Pablo Diaz-Rodriguez, Yuuki Tokuta, Ming Yang
- Organizer
  Asian-European International Conference on Plasma Surface Engineering, AEPSE2023
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] Film growth-based process design of HiPIMS pulse parameters -Role of repetition rate of instantaneous vapored flux-2023
- Author(s)
  Tetsuhide Shimizu
- Organizer
  ISPlasma/IC-PLANTS 2023
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] Impact of selective acceleration of high-mass ions - Low temperature growth of stress-free single phase α-W films-,2023
- Author(s)
  Tetsuhide Shimizu, Hao Du, Robert Boyd, Rommel Paulo Viloan, Daniel Lundin, Ming Yang, and Ulf Helmersson
- Organizer
  International Conference on Metallurgical Coatings and Thin Films, ICMCTF-2023
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] この10年間に見るHiPIMS技術の進化～イオン化率と成膜速度向上の両立に向けて～2022
- Author(s)
  清水徹英
- Organizer
  (社)日本トライボロジー学会，機能性コーティングの最適設計技術研究会第13期　第1回(通算第18回)会合
- Invited
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] 炭窒化ホウ素薄膜形成におけるHiPIMS パルス遅延同期バイアス電圧の効果2022
- Author(s)
  永倉颯，安西祐哉，菊田実希，徳田祐樹，楊明，清水徹英
- Organizer
  表面技術協会第146回講演大会
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] HiPIMS法によるmm細孔内壁面の薄膜成長と精密プレス金型への応用2022
- Author(s)
  清水徹英
- Organizer
  型技術ワークショップ2022 in 岐阜
- Invited
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] On the growth of boron carbon nitride coatings using HiPIMS with synchronized substrate bias2022
- Author(s)
  Hayate Nagakura, Yuya Anzai, Miki Kikuta, Ming Yang, Tetsuhide Shimizu
- Organizer
  The 22nd International Vacuum Congress, IVC-22
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] Synthesis of boron carbon nitride coatings using HiPIMS with synchronized substrate bias2021
- Author(s)
  Tetsuhide Shimizu, Miki Kikuta, Naoto Hayakawa, Ming Yang
- Organizer
  The 96th IUVSTA Workshop "HiPIMS Today"
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] ホローカソード型大電力パルス放電プラズマの時間分解発光分光分析2021
- Author(s)
  森幹太，Nikolay Britun，楊明，清水徹英
- Organizer
  公益社団法人日本表面真空学会2021年学術講演会
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] ホローカソード型大電力パルススパッタ法によるNi/NiOナノ粒子の成長速度制御2021
- Author(s)
  森幹太，渡邊峻，池田秀河，Sebastian Ekeroth，Robert Boyd，Ulf Helmersson，楊明，清水徹英
- Organizer
  日本機械学会第29回機械材料・材料加工技術講演会（M&P2021）
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] Low temperature growth of stress-free single phase α-W films using HiPIMS with synchronized pulsed substrate bias2021
- Author(s)
  Tetsuhide Shimizu, Kazuki Takahashi, Robert Boyd, Rommel Paulo Viloan, Julien Keraudy, Daniel Lundin, Ming Yang, and Ulf Helmersson
- Organizer
  TACT2021 (Taiwan Association for Coatings and Thin Film Technology) International Thin Films Conference
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] 大電力パルススパッタ法により形成した純Mg/MgOナノ積層膜の耐腐食性評価2021
- Author(s)
  山本大樹，早川直人，笠原健太郎，湯川泰之，山田健太郎，小舟諭史，小宮英敏，松澤和夫，楊明，清水徹英
- Organizer
  一般社団法人表面技術協会第144回講演大会
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] 基板入射イオンの選択性が及ぼすAlTiN硬質膜結晶成長への影響2021
- Author(s)
  荒川光，山村雄大，小宮英敏，徳田祐樹，寺西義一，楊明，清水徹英
- Organizer
  一般社団法人表面技術協会第144回講演大会
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] 反応性HiPIMS法による酸素空孔安定化ジルコニア薄膜の形成2021
- Author(s)
  齋藤直人，Adriano Panepinto, Stephanos Konstantinidis, 楊明，清水徹英
- Organizer
  公益社団法人日本表面真空学会2021年学術講演会
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] ailoring of oxide film growth in peak-current controlled reactive-HiPIMS2021
- Author(s)
  Tetsuhide Shimizu
- Organizer
  European Material Research Society (E-MRS) 2021 Spring Meeting
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] ミリメートルオーダー細孔内壁面におけるスパッタリング薄膜成長2021
- Author(s)
  小宮英敏，寺西義一，Rafael Alvarez，Alberto Palmero，楊明，清水徹英
- Organizer
  一般社団法人表面技術協会第144回講演大会
- Data Source
  KAKENHI-PROJECT-21H01674
[Presentation] Synthesis of semi-coherent Ni/NiO dual-phase nanoparticles using high-power pulsed hollow cathode sputtering2021
- Author(s)
  Tetsuhide Shimizu, Sebastian Ekeroth, Shuga Ikeda, Shun Watanabe, Robert Boyd, Ming Yang, Ulf Helmersson
- Organizer
  14th International Conference on Plasma-Nano Technology & Science
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] HiPIMSプラズマの過渡応答特性とその薄膜成長への応用2021
- Author(s)
  清水徹英
- Organizer
  日本表面真空学会スパッタリングおよぼプラズマプロセス技術部会第165回定例研究会
- Invited
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] HiPIMS法を用いたコーティング技術の開発と工具へのマイクロテクスチャ構造付与の効果2020
- Author(s)
  清水徹英
- Organizer
  日本塑性加工学会金型分科会　第51回セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] Synthesis of boron carbon nitride films by reactive HiPIMS of B4C in Ar/N2 mixture2019
- Author(s)
  Naoto Hayakawa, Hidetoshi Komiya, Yoshikazu Teranishi, Ming Yang, Tetsuhide Shimizu
- Organizer
  ISSP2019 (The 15th International Symposium on Sputtering & Plasma Processes)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] B4Cターゲットを用いた反応性HiPIMS 放電におけるプラズマ特性評価2019
- Author(s)
  早川直人，小宮英敏，寺西義一，楊明，清水徹英,
- Organizer
  2019年　日本表面真空学会学術講演会
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] Impact of magnetic field configuration in HiPIMS discharge of W in Ar atmosphere2019
- Author(s)
  Yuta Yamamura, Yoshikazu Teranishi, Hidetoshi Komiya, Ming Yang, Tetsuhide Shimizu
- Organizer
  ISSP2019 (The 15th International Symposium on Sputtering & Plasma Processes)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17KK0136
[Presentation] Effect of laser surface texturing patterns on lubrication properties in micro-sheet metal forming2018
- Author(s)
  T. Shimizu, H. Kobayashi, M. Yang
- Organizer
  The 11th Asian Workshop on Micro/Nano Forming Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Reactive HiPIMS deposition of MgO thin films using peak current regulation and its in-vitro corrosion performance for medical applications2018
- Author(s)
  Silmina Adzhani, Hidetoshi Komiya, Tetsuhide Shimizu, Ana Beatriz Chaar, Yoshikazu Teranishi, Ming Yang
- Organizer
  16th International Conference on Plasma Surface Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 大電力パルススパッタリングの特有性とドライコーティングへの応用2018
- Author(s)
  清水徹英
- Organizer
  日本溶射学会　関東支部平成29年度第3回支部講演会
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Ion mass spectrometry studies of the discharge during reactive high-power impulse magnetron sputtering of B4C in Ar and Ar/N22018
- Author(s)
  Tetsuhide Shimizu, Hidetoshi Komiya, Rommel P. Viloan, Julien Keraudy, Ming Yang, and Ulf Helmersson
- Organizer
  83rd IUVSTA Workshop
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 金型表面のマイクロテクスチャリングとその無潤滑摩擦摩耗挙動2018
- Author(s)
  清水徹英
- Organizer
  日本塑性加工学会プロセッシング計算分科会第60回セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] The effect of pulse frequency under peak current regulation in reactive HiPIMS of magnesium oxide2018
- Author(s)
  Silmina Adzhani, Hidetoshi Komiya, Yoshikazu Teranishi, Ming Yang, and Tetsuhide Shimizu
- Organizer
  Reactive Sputter Deposition 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] SiC/hBNナノ多層膜金型コーティングがチタン鍛造に及ぼす影響2018
- Author(s)
  木原武志, 中村浩, 金勇, 安原重雄, 森河和雄, 白鳥智美, 尾ノ井正裕, 立花昇一, 清水徹英, 楊　明
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-16H04540
[Presentation] 大電力パルススパッタリング HiPIMS技術の基礎～パルス波形とプラズマ特性の理解～2018
- Author(s)
  清水徹英
- Organizer
  表面技術協会高機能トライボ表面プロセス部会 H30年度実習セミナー
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Low temperature growth of tungsten thin films in HiPIMS with synchronized pulsed substrate bias2018
- Author(s)
  Tetsuhide Shimizu, Kazuki Takahashi, Hidetoshi Komiya, Julien Keraudy, Yoshikazu Teranishi, Ming Yang, Ulf Helmersson
- Organizer
  16th International Conference on Plasma Surface Engineering
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Geometrical design of micro-textured DLC coatings toward lubricant-free metal forming2018
- Author(s)
  Tetsuhide Shimizu, Hironori Kan, Hamza Messaoudi, Frank Vollertsen and Ming Yang
- Organizer
  5th International Conference on New Forming Technology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] HiPIMS法による成膜技術の動向と応用2018
- Author(s)
  清水徹英
- Organizer
  表面技術協会関西支部 H30年度第2回表面物性研究会
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Synthesis of SiC/hBN Nano-laminated Coating Films by　Atomic Layer Deposition and its Anti-adhesive Properties for Titanium2018
- Author(s)
  Ken Ishimaru,Jin Yong, Shigeo Yasuhara, Tetsuhide Shimizu, Ming Yang
- Organizer
  The 11th Asian Workshop on Micro/Nano Forming Technology (AWMFT2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04540
[Presentation] 原子層堆積法によるSiC/hBNナノ多層膜の形成と耐チタン凝着特性評価2018
- Author(s)
  石丸兼, 金勇, 安原重雄, 森河和雄, 木原武志, 清水徹英, 楊明
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-16H04540
[Presentation] Effect of ion-to-neutral ratio on thickness distribution of Ti and Al films on inner wall of small hole deposited by HiPIMS2018
- Author(s)
  Hidetoshi Komiya, Tetsuhide Shimizu, Ana Beatriz Chaar, Yoshikazu Teranishi, Ming Yang
- Organizer
  16th International Conference on Plasma Surface Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Evolution of ion flux composition in reactive HiPIMS of zirconium oxide under peak current regulation by pulse frequency control2018
- Author(s)
  Tetsuhide Shimizu, Silmina Adzhani, Shuga Ikeda, Ming Yang, Nikolay Britun, and Stephanos Konstantinidis
- Organizer
  Reactive Sputter Deposition 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Variation of Local Chemical Compositions of (Ti, Al)N Films on Inner Wall of Small Hole deposited by High Power Impulse Magnetron Sputtering2017
- Author(s)
  H. Komiya, T. Shimizu, Y. Teranishi, K. Morikawa, M.Yang
- Organizer
  44th ICMCTF (International Conference on Metallurgical Coatings & Thin Films)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] マイクロテクスチャDLC表面のドライ摩擦摩耗特性に及ぼす構造パターン寸法の影響2017
- Author(s)
  菅大徳、清水徹英、楊明
- Organizer
  平成29年度　塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] HiPIMS法による立方晶TiAlN硬質膜の低温形成とその残留応力制御2017
- Author(s)
  清水徹英
- Organizer
  日本真空学会機能薄膜部会　ナノ構造機能創成専門部会，第7回研究会
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 大電力パルススパッタ(HiPIMS)法による薄膜形成とその産業応用2017
- Author(s)
  清水徹英、小宮英敏、池田秀河、高橋一輝、楊明
- Organizer
  真空展2017
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Effect of reactive mode transition on growth of TiOx films by high power impulse magnetron sputtering2017
- Author(s)
  Makoto Tsukamoto, Tetsuhide Shimizu, Felipe Cemin, Daniel Lundin, Ming Yang, and Tiberiu Minea
- Organizer
  ISSP2017 (The 14th International Synposium on Sputtering & Plasma Processes)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Feedback Control of Reactive High Power Impulse Magnetron Sputtering by measuring the Pulse Peak Current and Adjusting the Pulse Frequency2017
- Author(s)
  11)Rafael Sanchez, Tetsuhide Shimizu, Michelle Marie Villamayor, Julien Keraudy, Daniel Lundin, Ulf Helmersson
- Organizer
  TACT2017 (International Thin Films Conference)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Control of oxygen content in MgOx thin film by peak pulse current regulation in reactive HiPIMS2017
- Author(s)
  5)Shuga Ikeda, Tetsuhide Shimizu, Hidetoshi Komiya, Ming Yang
- Organizer
  ISSP2017 (The 14th International Synposium on Sputtering & Plasma Processes)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 大電力パルスマグネトロンスパッタリング法による(Ti,Al)N膜の微細孔内壁への成膜2017
- Author(s)
  小宮秀敏，清水徹英，寺西義一，森河和雄，楊明
- Organizer
  2017年真空・表面科学合同講演会：第58回真空に関する連合講演会
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Residual Stress Control of Al-rich (Ti,Al)N Hard Coatings by Pulse Duration in High Power Impulse Magnetron Sputtering2017
- Author(s)
  T. Shimizu, S. Takahashi, H. Komiya, Y. Teranishi, K. Morikawa, M. Yang, U. Helmersson
- Organizer
  44th ICMCTF (International Conference on Metallurgical Coatings & Thin Films)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] HiPIMSパルス周波数のリアルタイム制御による反応性プロセス安定化技術の開発2017
- Author(s)
  清水徹英, M. M. Villamayor, Julien Keraudy, D. Lundin, U. Helmersson
- Organizer
  第19回　理研シンポジウム「トライボコーティングの現状と将来」
- Place of Presentation
  理化学研究所和光研究所鈴木梅太郎記念ホール（埼玉県和光市）
- Year and Date
  2017-02-24
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Feedback control of reactive high power impulse magnetron sputtering by measuring the pulse peak current and adjusting the pulse frequency2017
- Author(s)
  Rafael Sanchez, Tetsuhide Shimizu, Michelle Marie Villamayor, Julien Keraudy, Daniel Lundin, Ulf Helmersson
- Organizer
  ISSP2017 (The 14th International Synposium on Sputtering & Plasma Processes)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 工具摩耗の発生要因と表面の高機能化による対策2017
- Author(s)
  清水徹英
- Organizer
  日本塑性加工学会　金型分科会　第42回セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 高密度イオン化PVD法によるAlTiNの残留応力制御とそのナノ積層化の効果2017
- Author(s)
  清水徹英、高橋秀治、小宮英敏、寺西義一、楊明
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-16H04540
[Presentation] 高密度イオン化PVD法によるAlTiNの残留応力制御とそのナノ積層化の効果2017
- Author(s)
  清水徹英、高橋秀治、小宮英敏、寺西義一、楊明
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] The effect of Geometrical Paramieters of Micro-Textured DLC Coatings on Tribological Properties under Dry Sliding Friction2017
- Author(s)
  Hironori Kan, Tetsuhide Shimizu, Yang Ming
- Organizer
  The 1st Asia Pacific Symposium on Technology of Plasticity
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04540
[Presentation] Recent Activities and Research Trends on HiPIMS Technology in Japan2017
- Author(s)
  Tetsuhide SHIMIZU
- Organizer
  IUMRS-ICAM2017 (The 15th International Conference on Advanced Materials)
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Flexible control of residual stress of (Ti,Al)N films by regulating pulse duration in high power impulse magnetron sputtering2016
- Author(s)
  S. Takahashi, T. Shimizu, Y. Teranishi, K. Morikawa, M. Yang, and U. Helmersson
- Organizer
  International Vacuum Congress 20
- Place of Presentation
  釜山(韓国)
- Year and Date
  2016-08-21
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 反応性HiPIMSプロセスにおけるピーク電流値による遷移領域制御2016
- Author(s)
  清水徹英，M. M. Villamayor, Julien Keraudy, D. Lundin, U. Helmersson
- Organizer
  2016年真空・表面科学合同講演会：第57回真空に関する連合講演会
- Place of Presentation
  名古屋国際会議場（愛知県名古屋市）
- Year and Date
  2016-11-30
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Feedback control of reactive high power impulse magnetron sputtering by measuring the pulse peak current and adjusting the pulse frequency2016
- Author(s)
  R. Sanchez, T. Shimizu, M. M. Villamayor, J. Keraudy, D. Lundin, U. Helmersson
- Organizer
  International Vacuum Congress 20
- Place of Presentation
  釜山 (韓国)
- Year and Date
  2016-08-21
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Feedback Control of Reactive High Power Impulse Magnetron Sputtering by measuring the Pulse Peak Current and Adjusting the Pulse Frequency2016
- Author(s)
  T. Shimizu, M. M. Villamayor, R. P. Viloan, D. Lundin, U. Helmersson,
- Organizer
  ICMCTF2016
- Place of Presentation
  San Diego (USA)
- Year and Date
  2016-04-28
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Process stabilization by peak current regulation in reactive high-power impulse magnetron sputtering of metal nitrides and oxide2016
- Author(s)
  U. Helmersson, T. Shimizu, M. Villamayor, D. Lundin
- Organizer
  E-MRS2016 spring conference
- Place of Presentation
  Lille (France)
- Year and Date
  2016-05-02
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] HiPIMS deposition of TiAlN film at inner wall of small holes and its application to micro-die2016
- Author(s)
  T. Shimizu, H. Komiya, Y. Teranishi, K. Morikawa,H. Nagasaka, M.Yang
- Organizer
  トライボロジー会議2016春, Japan-Korea Tribology Symposium 2016: Functional Coatings and Carbon-Related Materials
- Place of Presentation
  国立オリンピック記念青少年総合センター（東京都渋谷区）
- Year and Date
  2016-05-23
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Development of micro pump actuated by oxidative expansion of Fe powder2016
- Author(s)
  Hironori KAN, Tetsuhide SHIMIZU, Ming YANG
- Organizer
  4M/IWMF 2016
- Place of Presentation
  リュンビュー（デンマーク）
- Year and Date
  2016-09-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K14184
[Presentation] Stabilized Reactive HiPIMS Deposition of HfN and TiO22016
- Author(s)
  M. Villamayor, T. Shimizu, D. Lundin, and U. Helmersson
- Organizer
  16th Joint Vacuum Conference
- Place of Presentation
  Portoroz (Slovenia)
- Year and Date
  2016-06-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] マイクロ金型の表面テクスチャリングとそのドライ摩擦・摩耗挙動のその場観察2016
- Author(s)
  清水徹英
- Organizer
  日本塑性加工学会，プロセス・トライボロジー分科会第147回研究会
- Place of Presentation
  岐阜大学サテライトキャンパス（岐阜県岐阜市）
- Year and Date
  2016-05-30
- Invited
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] Growth of (Ti, Al) N films at inner wall of sub-millimeter scale small holes by high power impulse magnetron sputtering2016
- Author(s)
  T. Shimizu, Y. Teranishi, K. Morikawa, Y. Kondo, H. Nagasaka, M. Yang
- Organizer
  1st International Symposium of Vacuum Soceiety of Phillipine
- Place of Presentation
  Manila, Phillipine
- Year and Date
  2016-01-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Reactive growth of HfN and TiO2 using peak current regulated high-power impulse magnetron sputtering2016
- Author(s)
  T. Shimizu, M. Villamayor, J. Keraudy, D. Lundin, U. Helmersson
- Organizer
  PSE2016
- Place of Presentation
  Garmish-Partenkirchen (Germany)
- Year and Date
  2016-09-15
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06801
[Presentation] 工具摩耗の原因とコーティングや機能面付与の効果2015
- Author(s)
  清水徹英
- Organizer
  平成27年度第63回塑性加工技術フォーラム「金型の寿命向上に向けた最新技術」
- Place of Presentation
  諏訪市，長野県
- Year and Date
  2015-10-16
- Invited
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] 熱フィラメントCVD法による窒化ホウ素膜の形成と純チタンに対する耐凝着性評価2015
- Author(s)
  Jin Yong，安原重雄，清水徹英，楊明
- Organizer
  平成27年度日本塑性加工学会春講演会
- Place of Presentation
  横浜市，神奈川県
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] マイクロ金型摺動界面のその場観察による表面テクスチャリングの有効性検証2015
- Author(s)
  清水徹英，掛川泰，宮本武、伊藤國吉，楊明
- Organizer
  平成27年度日本塑性加工学会　塑性加工春季講演会
- Place of Presentation
  横浜市，神奈川県
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] 軟質/硬質相を面内配置した DLC 複合膜の作製とそのトライボロジー特性評価2015
- Author(s)
  宮本武，清水徹英，楊明
- Organizer
  日本機械学会2015年度年次大会
- Place of Presentation
  札幌市，北海道
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Development of in-situ observation system of dynamic contact interface between dies and materials during microforming operation2015
- Author(s)
  T. Shimizu, T. Kakegawa, M. Yang
- Organizer
  4th International Conference on New Forming Technology (ICNFT2015)
- Place of Presentation
  Glasgow, UK
- Year and Date
  2015-08-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Growth and mechanical properties of (Ti, Al) N films at inner wall of sub-millimeter scale small holes deposited by HIPIMS2015
- Author(s)
  T. Shimizu, Y. Teranishi, K. Morikawa, Y. Kondo, H. Nagasaka, M. Yang
- Organizer
  6th Ineternational Conference on HIPIMS 2015
- Place of Presentation
  Braunschweig, Germany
- Year and Date
  2015-06-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Application of (Ti,Al)N hard coatings to micro-circular drawing die using high-power impulse magnetron sputtering2015
- Author(s)
  T. Shimizu, M. Yang
- Organizer
  The 8th Asian Workshop on Micro/Nano Forming Technology
- Place of Presentation
  諏訪市、長野県
- Year and Date
  2015-10-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] カーボンオニオン微粒子の固体潤滑特性に及ぼすその添加量および基材表面粗さの影響2015
- Author(s)
  戸田晶子，清水徹英，楊明
- Organizer
  日本機械学会2015年度年次大会
- Place of Presentation
  札幌市，北海道
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Classification of mesoscopic tribological properties under dry sliding friction for microforming operation2015
- Author(s)
  Tetsuhide Shimizu, Ming Yang, Ken-ichi Manabe
- Organizer
  Wear of Materials (WOM)
- Place of Presentation
  Tronto,Canada
- Year and Date
  2015-04-12
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] HIPIMS法によるTiAlN膜の低温薄膜形成とその膜特性評価2014
- Author(s)
  清水徹英, 寺西義一, 渡部友太郎, 長坂浩志, 小宮英俊, 楊　明
- Organizer
  日本機械学会2014年度年次大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Micro-texturing of DLC Thin Film Coatings and Its Tribological Performance under Dry Sliding Friction for Microforming Operation2014
- Author(s)
  T.Shimizu , T. Kakegawa, M. Yang
- Organizer
  Int. Conf. on Technology of Plasticity, ICTP2104
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] マイクロ金型への表面テクスチャリングとそのドライ摩擦・摩耗特性評価2014
- Author(s)
  掛川　泰, 清水　徹英, 楊　明
- Organizer
  日本機械学会2014年度年次大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Influence of HIPIMS Pulse Duration on the Properties of TiAlN Films Deposited at Low Substrate Temperature2014
- Author(s)
  T. SHIMIZU, T. WATANABE, Y. TERANISHI, H. NAGASAKA, H.KOMIYA, K. MORIKAWA, M. YANG
- Organizer
  E-MRS Spring Meeting 2014
- Place of Presentation
  リール, フランス
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Effects of HIPIMS Deposition Pressure on (Ti, Al)N Film Properties at Inner Wall of Sub-Millimeter Scale Small Holes2014
- Author(s)
  T. SHIMIZU, H.KOMIYA,　T. WATANABE, Y. TERANISHI, H. NAGASAKA, K. MORIKAWA, M. YANG
- Organizer
  5th Int. Conf. on Fundamental and Application of HIPIMS(HIPIMS2014)
- Place of Presentation
  シェフィールド、イギリス
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] HIPIMS法によるTiAlN薄膜形成とそのトライボロジー特使評価2013
- Author(s)
  清水徹英, 小宮英俊, 渡部友太郎, 寺西義一, 長坂浩志, 楊　明
- Organizer
  日本機械学会2013年度年次大会
- Place of Presentation
  岡山
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Anisotropic Tensile Ductility of Ultra-thin Rolled Phosphor Bronze2013
- Author(s)
  T. Shimizu, M. Yang, K. Manabe
- Organizer
  6th Asian workshop on Nano/Micro Forming Technology 2013(AWMFT2013)
- Place of Presentation
  済州、韓国
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] HIPIMS Deposition of TiAlN Films on Microforming Die and Its Tribological Properties in Progressive Micro-Deep Drawing2013
- Author(s)
  T. Shimizu, H. Komiya, T. Watanabe, Y. Teranishi, H. Nagasaka, M. Yang
- Organizer
  4th 4th Int. Conf. on Fundamental and Application of HIPIMS(HIPIMS2013)
- Place of Presentation
  ブラウンシュヴァイク、ドイツ
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 極薄金属箔材のドライ摩擦摺動特性に及ぼす被加工材質の影響2013
- Author(s)
  清水　徹英, 楊　明, 真鍋　健一
- Organizer
  第64回塑性加工連合講演会
- Place of Presentation
  大阪
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 極薄金属箔材のドライ摩擦摺動特性に対する金型表面特性の影響2013
- Author(s)
  清水徹英,楊明,真鍋健一
- Organizer
  平成25年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 極薄金属箔材のドライ摩擦摺動特性に及ぼす被加工材質の影響2013
- Author(s)
  清水徹英,楊明,真鍋健一
- Organizer
  第64回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 極薄金属箔材のドライ摩擦摺動特性に対する金型表面特性の影響2013
- Author(s)
  清水徹英、楊明、真鍋健一
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  愛知県
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] マイクロテクスチャ構造を有するDLC構造薄膜のドライ摩擦・摩耗特性評価2013
- Author(s)
  清水徹英、掛川泰、楊明
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  愛知県
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] マイクロテクスチャ構造を有するDLC薄膜のドライ摩擦・摩耗特性評価2013
- Author(s)
  清水徹英,掛川泰,楊明
- Organizer
  平成25年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 極薄金属箔材のドライ摩擦摺動特性に対する金型表面特性の影響2013
- Author(s)
  清水　徹英, 楊　明, 真鍋　健一
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] HIPIMS Deposition of TiAlN Films on Microforming Die and Its Tribological Properties in Progressive Micro-Deep Drawing2013
- Author(s)
  Tetsuhide SHIMIZU, Hidetoshi KOMIYA, Tomotaro WATANABE, Yoshikazu TERANISHI, Hiroshi NAGASAKA, Ming YANG
- Organizer
  4th International Conference on HiPIMS 2013
- Place of Presentation
  ブラウンシュヴァイク、ドイツ
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] マイクロテクスチャ構造を有するDLC薄膜のドライ摩擦・摩耗特性評価2013
- Author(s)
  清水　徹英, 掛川　泰, 楊　明
- Organizer
  平成25年度塑性加工春季講演会
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Development of Scaled Strip Drawing Friction Tester for Micro-Sheet Metal Forming2012
- Author(s)
  Tetsuhide Shimizu, Ming Yang, Ken-ichi Manabe
- Organizer
  5th Asian Workshop on Micro/Nano Forming Technology (AWMNF)
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 熱援用マイクロ塑性加工システムの開発と金属箔材成形への適用2012
- Author(s)
  清水徹英、田辺啓之、楊明
- Organizer
  第63回塑性加工連合講演会
- Place of Presentation
  福岡県
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Tribological Properties of Anodized Pure Titanium Foils in Micro-Deep Drawing with Ironing2012
- Author(s)
  Tetsuhide Shimizu,, Syuhei Iwaoka, Ken-ichi Manabe, Yoshikazu Teranishi, Kazuo Morikawa
- Organizer
  15th International Conference on Advances in Materials and Processing Technologies (AMPT)
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] High-Density Energy Assisted Micro Forming for Fabrication of Metallic Devices2012
- Author(s)
  Ming Yang, Hiroyuki Tanabe, Tetsuhide Shimizu
- Organizer
  15th International Conference on Advances in Materials and Processing Technologies (AMPT)
- Place of Presentation
  ウーロンゴン、オーストラリア
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] 医療用純チタン箔材のマイクロ精密プレス成形におけるトライボロジー特性2012
- Author(s)
  清水徹英、楊明,真鍋健一
- Organizer
  平成24年度東京都立産業技術研究センター研究成果発表会
- Year and Date
  2012-06-14
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Scale Dependence of Adhesion Behaviour under Dry Friction in Progressive Micro Deep Drawing2012
- Author(s)
  Tetsuhide Shimizu, Yushiro Murashige, Syuhei Iwaoka, Ming Yang, Ken-ichi Manabe
- Organizer
  3rd Asian Symposium on Materials and Processing (ASMP)
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Development of microforming process combined with selective chemical vapor deposition
- Author(s)
  Kazushi Koshimizu, Tetsuhide Shimizu, Ming Yang
- Organizer
  The 4th International Conference on New Forming Technology (ICNFT2015)
- Place of Presentation
  グラスゴー（イギリス）
- Year and Date
  2015-08-06 – 2015-08-09
- Data Source
  KAKENHI-PROJECT-25630331
[Presentation] Development of in-situ observation system of dynamic contact interface between dies and materials during microforming operation
- Author(s)
  T. Shimizu, T. Kakegawa, M. Yang
- Organizer
  International Conference on New Forming Technology 2015
- Place of Presentation
  Glassgow, UK
- Year and Date
  2015-08-06 – 2015-08-09
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] マイクロ金型への表面テクスチャリングとそのドライ摩擦・摩耗特性評価
- Author(s)
  掛川泰, 清水徹英, 楊明
- Organizer
  日本機械学会2014年度年次大会
- Place of Presentation
  東京電機大学　東京千住キャンパス，東京都足立区
- Year and Date
  2014-09-07 – 2014-09-10
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] プレス成形／薄膜転写プロセスの開発
- Author(s)
  輿水和志，清水徹英，楊明
- Organizer
  日本機械学会2014年度年次大会
- Place of Presentation
  東京電機大学　東京千住キャンパス
- Year and Date
  2014-09-07 – 2014-09-10
- Data Source
  KAKENHI-PROJECT-25630331
[Presentation] Development of microforming process combined with thin film transfer printing
- Author(s)
  Kazushi Koshimizu, Qiu Zheng, Tetsuhide Shimizu, Ming Yang
- Organizer
  The 7th Asian Workshop on Micro/Nano Formiong Technology (AWMFT2014)
- Place of Presentation
  台北（台湾）
- Year and Date
  2014-11-09 – 2014-11-12
- Data Source
  KAKENHI-PROJECT-25630331
[Presentation] 乾燥摩擦の寸法効果モデルによる金属箔材の摺動摩擦挙動解析
- Author(s)
  清水徹英, 楊明, 真鍋健一
- Organizer
  第65回塑性加工連合講演会
- Place of Presentation
  岡山大学　津島キャンパス，岡山県岡山市
- Year and Date
  2014-10-11 – 2014-10-13
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Influence of HIPIMS Pulse Duration on the Properties of TiAlN Films Deposited at Low Substrate Temperature
- Author(s)
  T. Shimizu, T. Watanabe, Y. Teranishi, H. Nagasaka, H. Komiya, K. Morikawa, M. Yang
- Organizer
  E-MRS spring conference
- Place of Presentation
  Lille, France
- Year and Date
  2014-05-27 – 2014-05-29
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Micro-texturing of DLC thin film coatings and its tribological performance under dry sliding friction for microforming operation
- Author(s)
  T. Shimizu, T. Kakegawa, M. Yang
- Organizer
  International Conference on Technology of Plasticity
- Place of Presentation
  名古屋国際会議場，愛知県名古屋市
- Year and Date
  2014-10-19 – 2014-10-24
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Effect of HIPIMS pulse frequency on low temperature deposition of TiAlN films
- Author(s)
  T. Shimizu, Y. Teranishi, K. Morikiwa, H. Komiya, H. Nagasaka, M. Yang
- Organizer
  IS-Plasma2015
- Place of Presentation
  名古屋大学，愛知県名古屋市
- Year and Date
  2015-03-26 – 2015-03-31
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] マイクロ金型摺動界面のその場観察による表面テクスチャリングの有効性検証
- Author(s)
  清水徹英，掛川泰，宮本武，伊藤國吉，楊明
- Organizer
  平成27年度塑性加工春季講演会
- Place of Presentation
  慶應義塾大学矢上キャンパス，神奈川県横浜市
- Year and Date
  2015-05-29 – 2015-05-31
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] HIPIMS法によるTiAlN膜の低温薄膜形成とその膜特性評価
- Author(s)
  清水徹英, 渡部友太郎, 寺西義一, 長坂浩志, 小宮英俊, 楊明
- Organizer
  日本機械学会2014年度年次大会
- Place of Presentation
  東京電機大学　東京千住キャンパス，東京都足立区
- Year and Date
  2014-09-07 – 2014-09-10
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] 医療用純チタン箔材のマイクロ精密プレス成形におけるトライボロジー特性
- Author(s)
  清水徹英、楊明，真鍋健一
- Organizer
  平成24年度東京都立産業技術研究センター研究成果発表会
- Place of Presentation
  東京都
- Data Source
  KAKENHI-PROJECT-24760609
[Presentation] Low temperature deposition of TiAlN thin films by high-power impulse magnetron sputtering
- Author(s)
  T. Shimizu, Y. Teranishi, K. Morikiwa, H. Komiya, H. Nagasaka, Y. Kondo, M. Yang
- Organizer
  2014 International Conference for Leading and Young Materials Scientists
- Place of Presentation
  Sanya, China
- Year and Date
  2014-12-21 – 2014-12-25
- Invited
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Classification of mesoscopic tribological properties under dry sliding friction for microforming operation
- Author(s)
  T. Shimizu, M. Yang, K. Manabe
- Organizer
  20th International Conference on Wear of Materials
- Place of Presentation
  Toronto, Canada
- Year and Date
  2015-04-12 – 2015-04-16
- Data Source
  KAKENHI-PROJECT-26820327
[Presentation] Effects of HIPIMS Deposition Pressure on (Ti, Al)N Film Properties at Inner Wall of Sub-Millimeter Scale Small Holes
- Author(s)
  T. Shimizu, H. Komiya, T. Watanabe, Y. Teranishi, H. Nagasaka, K. Morikawa, M. Yang,
- Organizer
  4th International Conference on Fundamental and Application of HIPIMS(HIPIMS2013)
- Place of Presentation
  Sheffield, UK
- Year and Date
  2014-06-30 – 2014-07-03
- Data Source
  KAKENHI-PROJECT-26820327

1. YANG Ming (90240142)

# of Collaborated Projects: 6 results

# of Collaborated Products: 35 results
2. MANABE Ken-ichi (10145667)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. FURUSHIMA Tsuyoshi (30444938)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. TAKAHASHI Satoshi (80260785)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 森河和雄 (60463048)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
6. 徳田祐樹 (30633515)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
7. BRITUN Nikolay (70899971)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
8. YASUHARA Shigeo

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
9. KIHARA Takeshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
10. ISHIMARU Ken

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
11. TERANISHI yoshikazu

# of Collaborated Projects: 1 results

# of Collaborated Products: 13 results
12. KOMIYA hidetoshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 14 results
13. HAYAKAWA naoto

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. TAKAHASHI kazuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 5 results
15. YAMAMURA yuta

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. Helmersson Ulf

# of Collaborated Projects: 1 results

# of Collaborated Products: 16 results
17. Keraudy Julien

# of Collaborated Projects: 1 results

# of Collaborated Products: 10 results
18. Viloan Rommel Paulo

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
19. Boyd Robert

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
20. Adzahni Silmina

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Shimizu Tetsuhide 清水 徹英

SHIMIZU Tetsuhide 清水 徹英

Research Projects

Research Products

Co-Researchers

多元加速イオン流束の時分割制御による超高靭性X2BC相成長機構の解明Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

微細管の高液圧成形における材料流動およびマイクロトライボ現象とその寸法効果解明

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Residual stress control of boroncarbon nitride coatings by bipolar-HiPIMSPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Mechanism investigation and modeling of material deformation enhancement in micro forming with vibration energy assistance

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Understanding the growth mechanism of boron carbon nitride films based on the ion transportation behavior in HiPIMS deischargePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of die coating system for difficult-to-process materials by forming cBN/hBN mixed phase nanocrystalline boron nitride film

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Synthesis of high toughness boron carbon nitride coatings by selective ion extraction in HiPIMS plasma dischargePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of an energy free drug delivery system using oxidative expansion of Fe powder

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Highly-Durable Surface Textured Forming Die by In-Plane Hetero-Structuring of Diamond Like Carbon FilmsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Multi-Scale Forming Technology for Fabrication of a metallic micro device with nano catalyst functional surface

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of high grade medical microtubes with microstructure control in superplastic dieless drawing process

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Mesoscopic tribological control in microforming by tailored surface texturingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] Metal Forming-Process, Tools, Design, Chpater 5- Imapct of Surface Topography of Tools and Materials in Micro Sheet Metal Forming2012

Author(s)

Total Pages

Shimizu Tetsuhide 清水徹英

SHIMIZU Tetsuhide 清水徹英

[Journal Article] HiPIMS法によるAlTiN硬質膜の形成とそのプレス金型への適用2020