メニュー
Search
Search Research Projects
Search Researchers
How to Use
Japanese
English
Back to previous page
NAKAJIMA Toshikatsu
中島 利勝
Connect your ORCID iD
*help
…
Alternative Names
TOSHIKATSU NAKAJ@iMA 中山 利勝
中島 利勝 ナカシマ トシカツ
Less
Researcher Number
80026038
External Links
Affiliation (based on the past Project Information)
*help
1989 – 2000: 岡山大学, 工学部, 教授
1987: Professor. Faculty of Engineering. Okayama University, 工学部, 教授
1986: 岡山大, 工学部, 教授
Review Section/Research Field
Principal Investigator
機械工作
/
機械工作・生産工学
Except Principal Investigator
機械工作・生産工学
/
機械工作
Keywords
Principal Investigator
研削加工 / サイアロン / 表面粗さ / 微小電場 / 砥石作用面 / 切れ刃形状 / 超精密研削 / 加工面創成機構 / ダイヤモンド砥石 / 塑性変形領域
…
More
/ アルミニウム粉混入レジノイド砥石 / 超精密加工 / 円弧形切削 / ダイヤモンド単粒 / 上すべり現象 / 加工変質層 / 研削クラック / クラック深さ / ファインセラミックス / 研削加工変質層 / 窒化ケイ素 / クラック / 背分力 / シリカ / 予見ファジィ / 知的自動化 / 学習機能 / ニューラルネットワーク / インプロセスセンシング / 加工メカニズム / 電場 / 研削砥石 / 加工精度 / 室化けい素 / アルミナ / 精密研削加工 / 単粒研削 / 砥石摩耗 / 部分安定化ジルコニア / 成形研削加工 / 弾性変形領域 / 切削状態 / V形溝 / 先端円弧半径 / レジノイド砥石 / ドレッシング / 移動熱源 / YAGレーザ / 砥粒支持剛性 / 研削性能 / アルミ粉混入レジノイド砥石 / 高能率・高精度研削加工 / 切れ刃先端位置 / チップポケット / 砥粒保持強度 / YAGレ-ザ / 砥石寿命 / Resinoid bond wheel / Grinding / Dressing / Moving heat source / YAG laser / Stiffness of grain mounting / Grinding characteristic / 遊離微粉砥粒 / 精密吸引加工 / キャリア / 絞り / キャビテーション効果 / クリアランス効果 / 砥粒数効果 / 吸引加工 / クリアランス / ultraprecision grinding / micro loose abrasive grain / sucking machining / carrier / restrictor / cavitation / clearance / grain number / 表面活性化現象 / 表面創成機構 / 超精密切りくず / 表面硬度 / super-precision / grinding machining / activate surface phenomenon / very small electric field / condition optimization / tool condition / workpiece condition / relative movement condition / アルミニウム混入レジノイド砥石 / APPLE砥石 / 研削熱 / 熱変形量 / 熱変形速度 / 寸法生成量 / 高精度・高能率研削砥石 / 円筒プランジ研削 / 砥石熱伝導率 / PVA砥石 / 空気マイクロメータ / 寸法生成速度 / 高能率・高精度研削 / -Poreless Resinoid Wheeel Aluminum Powder / Thermal Expamsion of Wheel and Work / Grinding Heat / Size Generation Process
…
More
Except Principal Investigator
表面粗さ / 研削加工 / 熱変形速度 / 輪郭研削 / 熱変形量 / 熱変形速度制御加工法 / 超精密切削 / 送り速度 / 研削熱変形 / 研削温度 / 研削抵抗 / インプロセス制御 / 高能率・高品質 / 研削能率 / 精密放電加工 / 単発放電痕 / 三次元測定 / 極細電極 / 溶融体積 / 放電エネルギ / 極低速度研削加工 / 構成刃先 / 砥石摩耗 / 硬度 / 層状組織 / 特異現象 / 精密加工 / 砥粒 / シミュレーション / トポグラフィ / プロフィル / 脆弱化層 / 窒化けい素 / 線形破壊力学 / 影響領域係数 / 円弧形切削 / 破壊じん性値 / 成形ダイヤモンド切れ刃 / Al-Mg合金 / 単結晶ダイヤモンドバイト / 仕上面あらさ / 結晶粒界段差 / ECP法 / 逃げ角 / 残留応力 / 単石ダイヤモンドバイト / ultraprecision cutting / Ai-Mg alloy / mono-crystallin diamond tool / surface finish / grain boundary / ECP / relief angle / residual stress / インプロセスオンライン / 実寸法生成速度 / 表面創成機構 / 超精密研削機構 / 表面硬度 / new grinding technique / grinding machining / thermal deformation of workpiece / predict system / condition optimization / size error of workpiece / In-process prediction system / 異方超弾性材料 / ダイヤモンドバイト / 形状誤差 / 切削熱 / 熱膨張係数 / 温度上昇 / Ultraprecision cutting / Anisotropic super-elastic alloy / Diamond tool / Geometrical accuracy / Cutting heat / Coefficient of thermal expansion / Feed rate
Less
Research Projects
(
22
results)
Co-Researchers
(
5
People)
Project Start Year (Newest)
Project Start Year (Oldest)
Ultraprecision Cutting Process of Anisotropic Super-elastic Alloy
Principal Investigator
OHASHI Kazuhito
Project Period (FY)
1999 – 2000
Research Category
Grant-in-Aid for Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
OKAYAMA UNIVERSITY
Development of thermal deformation speed controlled super precision grinding
Principal Investigator
TSUKAMOTO Sinya
Project Period (FY)
1998 – 1999
Research Category
Grant-in-Aid for Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
OKAYAMA UNIVERSITY
Super-precision machining using of activate surface phenomenon on the very small electric field
Principal Investigator
Principal Investigator
NAKAJIMA Toshikatsu
Project Period (FY)
1997 – 1998
Research Category
Grant-in-Aid for Scientific Research (B)
Research Field
機械工作・生産工学
Research Institution
Okayama University
Ultraprecision Cutting of Functional Materials
Principal Investigator
OHASHI Kazuhito
Project Period (FY)
1997 – 1998
Research Category
Grant-in-Aid for Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
超精密研削加工を実現するための基盤技術に関する研究
Principal Investigator
塚本 真也
Project Period (FY)
1996
Research Category
Grant-in-Aid for Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
微小電場における表面活性化現象と超精密加工面創成過程の研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1996
Research Category
Grant-in-Aid for Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
硬脆材料の研削加工における除去形態と脆弱化層の生成機構に関する研究
Principal Investigator
大橋 一仁
Project Period (FY)
1996
Research Category
Grant-in-Aid for Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
微小電場による表面活性化現象を利用した超精密研削加工の研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1995
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
精密輪郭研削加工の形状生成過程における熱変形速度制御加工法の開発
Principal Investigator
塚本 真也
Project Period (FY)
1995
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
Ultraprecision Grinding Technique of Fine Ceramics with Micro Loose Diamond Grain
Principal Investigator
Principal Investigator
NAKAJIMA Toshikatsu
Project Period (FY)
1995 – 1996
Research Category
Grant-in-Aid for Scientific Research (A)
Research Field
機械工作・生産工学
Research Institution
Okayama university
極微小電場を利用した微粉砥石による超精密研削加工の研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1994
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
硬脆材料の砥粒微粉による超精密加工に関する基礎的研究
Principal Investigator
塚本 眞也
Project Period (FY)
1994
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
研削加工の知的自動化に関する研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1993
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作・生産工学
Research Institution
Okayama University
極低速度研削加工における特異現象の発生機構に関する研究
Principal Investigator
塚本 眞也
Project Period (FY)
1991
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
ファインセラミックスの研削加工変質層の生成機構に関する研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1991
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
Production of Aluminium Powdered Poreless Elastic Wheel and Development of Dressing Techniques with Moving Heat Source
Principal Investigator
Principal Investigator
NAKAJIMA Toshikatsu
Project Period (FY)
1991 – 1992
Research Category
Grant-in-Aid for Developmental Scientific Research (B)
Research Field
機械工作
Research Institution
Okayama University
サイアロンの精密成形研削加工と加工変質層の生成機構に関する研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1990
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
極細電極による精密放電加工面の生成に関する研究
Principal Investigator
宇野 義幸
Project Period (FY)
1990
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
熱変形速度のインプロセス制御による高品質・高能率研削加工の研究
Principal Investigator
TSUKAMOTO Shinya
Project Period (FY)
1989
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
部分安定化ジルコニアの高精度成形研削加工の研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1987
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
窒化けい素セラミックスの精密研削加工の研究
Principal Investigator
Principal Investigator
中島 利勝
Project Period (FY)
1986
Research Category
Grant-in-Aid for General Scientific Research (C)
Research Field
機械工作
Research Institution
Okayama University
Development of High Performance Grinding Wheel with Aluminium Powder in Resinoid Bond
Principal Investigator
Principal Investigator
TOSHIKATSU NAKAJ@iMA
Project Period (FY)
1986 – 1987
Research Category
Grant-in-Aid for Developmental Scientific Research
Research Field
機械工作
Research Institution
Faculty of Engineering. Okayama University Grant-in-Aid for Developmental Scientific Research
# of Projects (Dsc)
# of Projects (Asc)
1.
TSUKAMOTO Shinya
(80163773)
# of Collaborated Projects:
22 results
# of Collaborated Products:
0 results
2.
OHASHI Kazuhito
(10223918)
# of Collaborated Projects:
17 results
# of Collaborated Products:
0 results
3.
YOSHIYUKI UNO
(20029341)
# of Collaborated Projects:
6 results
# of Collaborated Products:
0 results
4.
FUJIWARA Takanori
(20274011)
# of Collaborated Projects:
2 results
# of Collaborated Products:
0 results
5.
SHINYA TSUKAMOTO
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
×
Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.
この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。
×
×