YANAGI Kazuhisa 柳和久

Researcher Number	80108216
Other IDs
External Links
Affiliation (based on the past Project Information) *help	1995 – 2011: 長岡技術科学大学, 工学部, 教授 2004 – 2005: 長岡科学技術大学, 工学部, 教授 1990 – 1993: 長岡技術科学大学, 工作センター, 助教授 1990: 長岡技術科学大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator 設計工学・機械要素・トライボロジー / Production engineering/Processing studies / 機械工作 Except Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / 機械工作 / 機械要素
Keywords	Principal Investigator surface texture / 不確かさ / 表面性状 / 表面テクスチャ / 表面粗さ / AR model / parameter / ball end-mill / standard surface / material measure … More / software gauge / 表面性状パラメータ / ソルトゲージ / ボールエンドミル / パラメータ / ソフトゲージ / 実量器 / 標準表面 / 自己回帰モデル / geo-statistical parameter / data file format / uncertainty / surface profiling instrument / calibration standard / コスト低減 / 弾塑性 / 幾何統計パラメータ / データ形式 / 表面形状測定機 / 校正用標準片 / filtration / head separation / head disk interface / tribology / magnetic disk / surface waviness / マイクロトライボロジー / 磁気ヘッド / 円周トラック / ディジタルフィルタ / 輪郭形状 / フィルタ処理 / ヘッド浮上 / ヘッドディスク界面 / トライボロジー / 磁気ディスク / 表面うねり / adaptive control / on-the-machine measurement / working fluid / non-contact measurement / laser speckle / electrical discharge machining / 画像処理 / 加工条件 / レ-ザ- / 非接触測定 / レ-ザ / 最適化制御 / レ-ザ-スペックル / オンマシ-ン計測 / 加工液 / 非接触計測 / 放電加工 / 測定標準面 / 国際標準規格 / ナノ・マイクロ加工 / 評価パラメータ / 国際標準化機構 / 三次元測定 … More Except Principal Investigator 結晶格子 / トレーサビリティ / ピコメートル / regular crystalline lattice / scanning tunneling microscope / ナノメートル / 走査型トンネル顕微鏡(STM) / サブナノメートル / 走査型トンネル顕微鏡 / 超精密計測 / STM / スペックルノイズ / 光触針 / 光応用計測 / external cavity laser diode / frequency / null method / lock-in detection / phase modulation / interferometer / picometer / meter definition / ビート周波数 / ナノメトロロジー / 光周波数 / 周波数可変レーザ / 周波数 / 零位法 / ロックイン検出 / 位相変調 / 干渉計 / メートル標準 / Two orthogonal systems / Profile measurement / Optical stylus / Speckle noise / Noncontact displacement sensor / 直交2系統システム / 表面形状測定 / 非接触変位センサー / Regular crystalline lattice / Atomic Force Microscope (AFM) / Scanning tunneling Microscope (STM) / Traceability / Picometer / Resonance / Optical cavity / 原子間力顕微鏡(AFM) / 原始間力顕微鏡(AFM) / 共鳴 / 光共振器 / In process measurement / V block method / SLD(Super Luminescent Diode) / Roundness / Run-out locus / Cylindrical parts of small diameter / Optical measurement / イップロセス測定 / 微小経円筒体 / インプロセス測定 / SLD / Vブロック方式 / 振回り軌跡 / 真円度 / 微小径円筒体 / Atomic tracking control / sub-nanometer / ultra precision straight-motion stage / トラッキング制御 / 原子トラッキング / 直動機構 / subnanometer / ultraprecision positioning and tracking / ultralow linear expansion glass / thermal drift / length measurement / 長精密位置決め / 回折格子 / 結晶格子スケール / ロックインアンプ / 超精度位置決め / 超精密位置決め / 極低熱膨張ガラス / 熱ドリフト / 比較測長 / squeeze film / laser, / spherical mirror, / target, / image processing, / scanner, / 3-D measurement, / CCD camera, / 黒当たり / ささげ加工 / 砥石の摩耗 / 三角測量 / スクイーズフィルム / レーザ / 球面ミラー / 画像処理 / ターゲット / スキャナー / 三次元測定 / CCDカメラ / Ulera precession grinding / Diamond cutting / Ultra precession centrole / Ultra precession Majering / Ultra precesjion maching / Cutting / Damage Layt / Both hard and brittle / 延性モ-ド / 形状計測 / 加工精度 / 加工変質 / 切込み深さ / ダイヤモンド / 超精密切削 / 超精密研削 / ダイヤモンド切削 / 超精密制御 / 超精密加工 / 切削 / 延性モード / 硬脆材料 / Nano-Technology / Crystalline Lattice / Linear Scale / ナノテクノロジ- / リニアスケ-ル / ナノテクノロジー / リニアスケール / 輪郭形状 / スペックル / 非接触式 / 輪郭形状測定 / 共焦点方式 / 小穴計測 / 半導体レーザ / 表面性状測定 / 楕円スポット / 非接触表面性状測定 / エッジ検出 / 回析 / レーザビーム / スピンドル / 熱変形 / 透過光方式 / ワイヤ振動 / ワイヤEDM / 偏心 / スプリングコレット / 回転精度 / 透過光量測定 / レーザ応用計測 Less

Manufacture of calibration and measurement surface standards for areal surface texture measuring instruments and their international standardizationPrincipal Investigator
- Principal Investigator
  
  YANAGI Kazuhisa
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagaoka University of Technology
Development of an optical profiling sensor suppressing outliers and able to deal with inclinations
- Principal Investigator
  
  FUKATSU Hiroya
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Metropolitan College of Industrial Technology
Displacement measuring interferometer with picometer resolution from frequency shift using meter definition
- Principal Investigator
  
  AKETAGAWA Masato
- Project Period (FY)
  2005 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagaoka University of Technology
Robust Optical profiling system in Surface Texture
- Principal Investigator
  
  FUKATSU Hiroya
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo metropolitan college of technology
Development of software gauge and material measure with large area to standardize analytic tools for surface topography dataPrincipal Investigator
- Principal Investigator
  
  YANAGI Kazuhisa
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagaoka University of Technology
Length measurement method with resolution of picometer using high-finesse optical cavity and regular crystalline lattice
- Principal Investigator
  
  AKETAGAWA Masato, 高田孝次
- Project Period (FY)
  2002 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka University of Technology
In-process roundness measurement system for cylindrical machine parts of small diameter w|th run-out error compensation
- Principal Investigator
  
  YAMADA Ryuichi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka National College of Technology
Trial manufacturing of isotropic random surfaces for calibration and uncertainty analysis of surface profiling instrumentsPrincipal Investigator
- Principal Investigator
  
  YANAGI Kazuhisa
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Nagaoka University of Technology
表面テクスチャの三次元測定規範と形状評価パラメータの国際標準化支援研究Principal Investigator
- Principal Investigator
  
  柳和久
- Project Period (FY)
  1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Nagaoka University of Technology
Development of ultra precision straight-motion stage by referring a crystalline array on crystalline surface
- Principal Investigator
  
  TAKADA Koji
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka University of Technology
Functional evaluation of surface waviness of contact recording magnetic disk and analytical estimation of head flying locusPrincipal Investigator
- Principal Investigator
  
  YANAGI Kazuhisa
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  NAGAOKA UNIVERSITY OF TECHNOLOGY
レーザビームの透過光方式によるスピンドル熱変位の直交3成分実時間同時評価システム
- Principal Investigator
  
  山田隆一
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka National College of Technology
結晶格子をスケールとするサブナノメートル測長・加工機の開発研究
- Principal Investigator
  
  AKETAGAWA Masato, 高田孝次
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka University of Technology
レーザビームを用いた小径円筒体及び振動体の偏心成分と振れ成分の分離評価
- Principal Investigator
  
  YAMADA Ryuichi
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka National College of Technology
Development of 3-D measuring system by using CCD camera
- Principal Investigator
  
  KYUSOJIN Akira
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for international Scientific Research
- Research Field
  
  機械工作・生産工学
- Research Institution
  Nagaoka University of Technology
Stady on ductile mode cutting of both hard and brittel materials
- Principal Investigator
  
  TANI Yashuhiro
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  University of Tokyo
Research of Ultra Precision Linear Digital Scale by Using Regular Crystalline Lattice
- Principal Investigator
  
  TAKADA Koji
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械要素
- Research Institution
  Nagaoka University of Technology (N.U.T)
Optical Measurement of Surface Texture for Practical use in working fluid of an Electric Discharge Machine and Optimization of its Machining ConditionsPrincipal Investigator
- Principal Investigator
  
  YANAGI Kazuhisa
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Nagaoka University of Technology

All 2012 2011 2010 2009 2008 2007 2006 2005 2004

All Journal Article Presentation

[Journal Article] Development of measurement standards for verifying functional performance of surface texture measuring instruments2011
- Author(s)
  A.Fujii, H.Suzuki, K.Yanagi
- Journal Title
  
  Journal of Physics : Conference Series
  
  Volume: 311 Pages: 1-7
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] 焦点検出式輪郭測定センサを対象とした微細凹凸面による回折像解析2011
- Author(s)
  深津拡也、岡和彦、柳和久
- Journal Title
  
  精密工学会誌
  
  Volume: 77, 4 Pages: 428-432
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2011
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, A. Iwabuchi
- Journal Title
  
  Wear
  
  Volume: 271 Pages: 565-570
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Generation of 3-D random topography datasets with periodic bound-aries for surface metrology algorithms and measurement standards2011
- Author(s)
  M.Uchidate
- Journal Title
  
  Wear
  
  Volume: 271 Issue: 3-4 Pages: 565-670
- DOI
  10.1016/j.wear.2010.04.035
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760109, KAKENHI-PROJECT-21360062
[Journal Article] Development of measurement standards for verifying functional performance of surface texture measuring instruments2011
- Author(s)
  A. Fujii, H. Suzuki and K. Yanagi
- Journal Title
  
  13th Int. Conf. on Metrology and Properties of Engineering Surfaces, Journal of Physics : Conference Series 311, IOP Publishing
  
  Volume: 012009 Pages: 1-7
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] 面領域の表面性状測定機を対象とした測定標準に関する研究-第1報粗さ測定用標準面の設計-2010
- Author(s)
  根本賢太郎、柳和久、明田川正人、内舘道正、吉田一朗
- Journal Title
  
  精密工学会誌 76, 3
  
  Pages: 349-353
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Characterisation of geometrical properties of electroplated diamond tools and estimation of its grinding performances2010
- Author(s)
  Mohd Fauzi Ismail, Kazuhisa Yanagi and Hiromi Isobe
- Journal Title
  
  Wear Special Issue
  
  Volume: 271 Issue: 3-4 Pages: 559-564
- DOI
  10.1016/j.wear.2010.04.030
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] An outlier correction procedure and its application to areal surface data measured by optical instruments2010
- Author(s)
  Mohd Fauzi Ismail, Kazuhisa Yanagi, Akihiro Fujii
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 21,doi:10.1088 Pages: 1-11
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] An outlier correction procedure and its application to areal surface data measured by optical instruments2010
- Author(s)
  Mohd Fauzi Ismail, Kazuhisa Yanagi and Akihiro Fujii
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 21 Issue: 10 Pages: 105105-105105
- DOI
  10.1088/0957-0233/21/10/105105
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2010
- Author(s)
  M.Uchidate, K.Yanagi, I.Yoshida, T.Shimizu, A.Iwabuchi
- Journal Title
  
  Wear Special Issue
  
  Volume: doi:10.1016/j.wear.2010.04.035 Pages: 1-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] 面領域の表面性状測定機を対象とした測定標準に関する研究-第1報粗さ測定用標準面の設計-2010
- Author(s)
  根本賢太郎、柳和久、明田川正人、内舘道正、吉田一朗
- Journal Title
  
  精密工学会誌
  
  Volume: 76, 3 Pages: 349-353
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] An optimal discrete operator for the two-dimensional Spline filter2009
- Author(s)
  T.Goto, K.Yanagi
- Journal Title
  
  Measurement Science and Technology MST 20 Online
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Development of a roughness measurement standard with irregular surface topography for improving 3D surface texture measurement2009
- Author(s)
  K.Nemoto, K.Yanagi, M.Aketagawa, I.Yoshida, M.Uchidate, T.Miyaguchi, H.Maruyama
- Journal Title
  
  Measurement Science and Technology MST 20 Online
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] An optimal discrete operator for the two-dimensional Spline filter2009
- Author(s)
  Tomonori Goto and Kazuhisa Yanagi
- Journal Title
  
  Measurement Science and Technology
  
  Volume: Vol.20No.12 Pages: 125105-125108
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] Development of a roughness measurement standard with irregular surface topography for improving 3D surface texture measurement2009
- Author(s)
  Kentaro Nemoto, Kazuhisa Yanagi, Masato Aketagawa, Ichiro Yoshida, Michimasa Uchidate, Takashi Miyaguchi and Hideki Maruyama
- Journal Title
  
  Measurement Science and Technology
  
  Volume: 20
- Data Source
  KAKENHI-PROJECT-21360062
[Journal Article] 非接触式倣いプローブの開発2007
- Author(s)
  深津拡也, 柳和久
- Journal Title
  
  精密工学会春季大会学術講演会講演論文集
  
  Pages: 321-322
- NAID
  130005028452
- Data Source
  KAKENHI-PROJECT-18560120
[Journal Article] 楕円スポットを用いた共焦点式輪郭形状センサの開発2006
- Author(s)
  深津拡也, 柳和久
- Journal Title
  
  精密工学会秋季大会学術講演会講演論文集
  
  Pages: 161-162
- NAID
  130004658001
- Data Source
  KAKENHI-PROJECT-18560120
[Journal Article] A Robust Spline Filter on the basis of L2-norm2005
- Author(s)
  T.Goto, J.Miyakura, K.Umeda, S.Kadowaki, K.Yanagi
- Journal Title
  
  Precision Engineering 29
  
  Pages: 157-161
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] 三次元ランダム表面凹凸データに基づく表面性状実量器の製作2005
- Author(s)
  鈴木大悟, 内舘道正, 柳和久
- Journal Title
  
  2005年度精密工学会春季大会講演論文集 I68
  
  Pages: 775-776
- NAID
  130004657624
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] 静電容量型変位センサを用いた表面形状測定時のサンプリング間隔決定法2005
- Author(s)
  齋藤輝明, 外川一仁, 柳和久
- Journal Title
  
  日本機械学会論文集(C) 71,703
  
  Pages: 1018-1023
- NAID
  110006264628
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] Development of an Optical Stylus Displacement Sensor having a Speckle Noise Reduction Capability.2005
- Author(s)
  Hiroya Fukatsu, Kazuhisa Yanagi
- Journal Title
  
  Proc.of 5^<th> Int.Conf.and 7^<th> Annual General Meeting of euspen, Montpellier, France
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] Outlier compensation effect of an optical profiling sensor by elliptical spot irradiation2005
- Author(s)
  Hiroya FUKATSU, Kazuhisa YANAGI
- Journal Title
  
  Japan society for precision engineering 71,12
  
  Pages: 1590-1594
- NAID
  110002545871
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] A practical method for compensating surface inclination effect on optical stylus profile measurement2005
- Author(s)
  Hiroya FUKATSU, Kiyotaka MISU, Kazuhisa YANAGI
- Journal Title
  
  Japan society for precision engineering 71,5
  
  Pages: 590-594
- NAID
  10015529669
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] Development of an optical stylus displacement sensor for surface profiling instruments2005
- Author(s)
  Hiroya FUKATSU, Kazuhisa YANAGI
- Journal Title
  
  Microsystem Technologies 11,8-10
  
  Pages: 582-589
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] Sophisticated Filtration Technique for 3D Surface Topography Data of Rectangular Area.2005
- Author(s)
  Hikaru Hanada, Teruaki Saito, Kazuhisa Yanagi
- Journal Title
  
  Proc.of 10^<th> Int.Conf.on Metrology and Properties of Engineering Surfaces, Saint Etiene, France
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] Development of an optical stylus displacement sensor having a speckle noise reduction capability2005
- Author(s)
  Hiroya FUKATSU, Kazuhisa YANAGI
- Journal Title
  
  5th International Conference of the euspen Vol.1
  
  Pages: 149-152
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] Robust Spline Filter on the basis of L2-norm.2005
- Author(s)
  T.Goto, J.Miyakura, K.Umeda, S.Kadowaki, K.Yanagi
- Journal Title
  
  Precision Engineering Vol.29
  
  Pages: 157-161
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] Development of an optical stylus displacement sensor for surface profiling measurement2004
- Author(s)
  Hiroya FUKATSU, Kazuhisa YANAGI
- Journal Title
  
  Transactions of the Japan Society of Mechanical Engineering 70,694, C
  
  Pages: 193-198
- NAID
  110006263940
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] A new approach to areal segmentation of surface topography data and incorporation into significant feature area based on watershed property2004
- Author(s)
  Kazuhisa Yanagi, Masayuki Hasegawa
- Journal Title
  
  Proc.of 8^<th> Int.Symposium on Measurement and Quality Control in Production, Erlangen
  
  Pages: 775-782
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] A speckle error compensation system for improving measurement performance of optical stylus instrument2004
- Author(s)
  Hiroya FUKATSU, Kazuhisa YANAGI
- Journal Title
  
  Japan society for precision engineering 70,5
  
  Pages: 716-720
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] Generation of reference data of 3D surface texture using the non-casual 2D AR model2004
- Author(s)
  M.Uchidate, T.Shimizu, A.Iwabuchi, K.Yanagi
- Journal Title
  
  Wear 257
  
  Pages: 1288-1295
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] A Practical Method of Determining Orthogonal Distances for Flatness Deviation Measurement Using an Electric Capacitance Displacement Sensor.2004
- Author(s)
  Teruaki Saito, Kazuhisa Yanagi
- Journal Title
  
  Proc.of ASPE 19^<th> Annual Meeting Vol.29
  
  Pages: 410-413
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] 輪郭形状測定のための光触針式変位センサの開発2004
- Author(s)
  深津拡也, 柳和久
- Journal Title
  
  日本機械学会論文集(C) 70,694
  
  Pages: 1737-1742
- NAID
  110006263940
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] A new approach to areal segmentation of surface topography data and incorporation into significant feature area based on watershed property.2004
- Author(s)
  Kazuhisa Yanagi, Masayuki Hasegawa
- Journal Title
  
  Proc.of 8^<th> Int.Symposium on Measurement and Quality Control in Production, Erlangen
  
  Pages: 775-782
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] 光触針式輪郭測定機の性能向上を目的としたスペックル誤差補正システム2004
- Author(s)
  深津拡也, 柳和久
- Journal Title
  
  精密学会誌 70巻第5号
  
  Pages: 716-720
- NAID
  110001823999
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] Generation of reference data of 3D surface texture using the non-causal 2D AR model2004
- Author(s)
  M.Uchidate, T.Shimizu, A.Iwabuchi, K.Yanagi
- Journal Title
  
  Wear 257
  
  Pages: 1288-1293
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] A new spproach to areal segmentation of surface topography data and incorporation into significant feature area based on watershed property2004
- Author(s)
  Kazuhisa Yanagi, Masayuki Hasegawa
- Journal Title
  
  Proc. of 8^<th> Int. Symposium on Measurement and Quality Control in Production, Erlangen
  
  Pages: 775-782
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] Generation of reference data of 3D surface texture using the non-causal 2D AR model.2004
- Author(s)
  M.Uchidate, T.Shimizu, A.Iwabuchi, K.Yanagi
- Journal Title
  
  Wear 257
  
  Pages: 1288-1295
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560092
[Journal Article] 楕円スポットによる光輪郭センサーの性能向上2004
- Author(s)
  深津拡也, 柳和久
- Journal Title
  
  精密工学会秋季大会学術講演会講演論文集
  
  Pages: 997-998
- NAID
  130004655872
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] 輪郭形状測定のための光触針式変位センサーの開発2004
- Author(s)
  深津拡也, 柳和久
- Journal Title
  
  日本機械学会論文集 70巻694号C編
  
  Pages: 193-198
- NAID
  110006263940
- Data Source
  KAKENHI-PROJECT-16560106
[Journal Article] 特徴パラメータによる三次元表面性状のマルチスケール解析2004
- Author(s)
  長谷川真之, 柳和久
- Journal Title
  
  2004年度精密工学会秋季大会講演論文集 E75
  
  Pages: 407-408
- NAID
  130004655544
- Data Source
  KAKENHI-PROJECT-15560092
[Presentation] 光学式の表面性状測定機を対象とした短波長測定限界に関する一考察2012
- Author(s)
  藤井章弘、柳和久
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京(南大沢キャンパス)
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] 光学式の表面性状測定機を対象とした短波長測定限界に関する一考察2012
- Author(s)
  藤井章弘、柳和久
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] Development of measurement standards for verifying functional performance of surface texture measuring instruments2011
- Author(s)
  A. Fujii, H. Suzuki and K. Yanagi
- Organizer
  13th Int. Conf. on Metrology and Properties of Engineering Surfaces
- Place of Presentation
  NPL London
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] 面領域の表面性状評価-幾何特性のスケール依存と表記法2010
- Author(s)
  柳和久、Francois Blateyron
- Organizer
  トライボロジー会議
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] テクスチャ表面のトライボロジー(2)テクスチャ表面の性状評価2010
- Author(s)
  柳和久
- Organizer
  日本機械学会2010年度年次大会
- Place of Presentation
  名古屋工業大学
- Year and Date
  2010-09-08
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] A study on response properties of surface texture measuring instruments in terms of surface wavelengths2010
- Author(s)
  Akihiko Fujii, Hitoshi Suzuki and Kazuhisa Yanagi
- Organizer
  Proc. of ASPE 2010 Summer Topical Meeting
- Place of Presentation
  Ashville, North Carolina
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] ナノインプリント技術を用いた表面性状標準の複製2010
- Author(s)
  山岡正英、田中秀岳、柳和久
- Organizer
  2010年度精密工学会北陸信越支部学術講演会後援論文集
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] 【ワークショップ】テクスチャ表面のトライボロジー(2)テクスチャ表面の性状評価2010
- Author(s)
  柳和久
- Organizer
  日本機械学会2010年度年次大会
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] ナノインプリント技術を用いた表面性状標準の複製2010
- Author(s)
  山岡正英、田中秀岳、柳和久
- Organizer
  2010年度精密工学会北陸信越支部学術講演会
- Place of Presentation
  長岡技術科学大学
- Year and Date
  2010-11-06
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] 面領域の表面性状評価-幾何特性のスケール依存と表記法2010
- Author(s)
  柳和久、Francois Blateyron
- Organizer
  トライボロジー会議2010春東京
- Place of Presentation
  東京(代々木)
- Year and Date
  2010-05-18
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] ナノインプリント技術を用いた表面性状標準の複製2009
- Author(s)
  山口晋均、柳和久、田中秀岳、山岡正英
- Organizer
  2009年度精密工学会秋季大会講演論文集
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] An optimal discrete operator for the two-dimensional Spline Filter2009
- Author(s)
  Tomonori Gotoh, Kazuhisa Yanagi
- Organizer
  Int.Conf.on Surface Metrology
- Place of Presentation
  Worcester Polytechnic Institute, MA, USA
- Year and Date
  2009-10-26
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] ナノインプリント技術を用いた表面性状標準の複製2009
- Author(s)
  山口晋均、柳和久、田中秀岳、山岡正英
- Organizer
  2009年度精密工学会秋季大会
- Place of Presentation
  神戸大学大学院工学研究科
- Year and Date
  2009-09-10
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] Generation of 3-D random topography datasets with periodic boundaries for surface metrology algorithms and measurement standards2009
- Author(s)
  M. Uchidate, K. Yanagi, I. Yoshida, T. Shimizu, and A. Iwabuchi
- Organizer
  Proc. of 12th Int. Conf. on Metrology & Properties of Engineering Surfaces
- Place of Presentation
  Rzeszow, Poland
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] Generation of 3-D random topography datasets with periodic boundaries for surface metrology and measurement standards2009
- Author(s)
  M.Uchidate, K.Yanagi, I.Yoshida, T.Shimizu, A.Iwabuchi
- Organizer
  12^<th> Int.Conf.on Metrology & Properties of Engineering Surfaces
- Place of Presentation
  Rzeszow University of Technology, Poland
- Year and Date
  2009-07-09
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] An optimal discrete operator for the two-dimensional Spline filter2009
- Author(s)
  Tomonori Gotoh and Kazuhisa Yanagi
- Organizer
  Proc. of Int. Conf. on Surface Metrology at WPI
- Place of Presentation
  Worcester, MA
- Data Source
  KAKENHI-PROJECT-21360062
[Presentation] Development of a confocal probe with elliptical spot2008
- Author(s)
  Hiroya FUKATSU、 Kazuhisa Yanagi
- Organizer
  7th International Conference of the euspen
- Place of Presentation
  Bremen, Germany
- Year and Date
  2008-05-22
- Data Source
  KAKENHI-PROJECT-18560120

1. AKETAGAWA Masato (10231854)

# of Collaborated Projects: 12 results

# of Collaborated Products: 4 results
2. TAKADA Koji (80126474)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
3. HARA Seiichiro (40293253)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. YAMADA Ryuichi (40110142)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
5. FUKATSU Hiroya (80228866)

# of Collaborated Projects: 3 results

# of Collaborated Products: 13 results
6. SASAJIMA Kazuyuki (80170702)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. UCHIDATE Michimasa (30422067)

# of Collaborated Projects: 2 results

# of Collaborated Products: 15 results
8. KYUSOJIN Akira (20016661)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. ISOBE Hiromi (60272861)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. YANABE Shigeo (30016662)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. ILLES Dudas

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. TANAKA Hidetake (10422651)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
13. HIROTSU Yoshihiko (70016525)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. TANI Yashuhiro (80143527)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. IKENO Junichi (10184441)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. SEMBA Takuya (30154678)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. HORIUCHI Osamu (20029185)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. TANABE Ikuo (30155189)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. KOBAYASHI Yoshikazu (60277390)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. NAMERIKAWA Toru (30262554)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. 塚田忠夫 (00016437)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. 嶋本篤 (90226225)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. ANAZAWA Norimichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. NAKAYAMA Yoshinori

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. UDA Yutaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. BANYAI Karol

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. DUDAS Illes

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. KAROLY Banyai

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. KAROLY Banya

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. GYULA Varga

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. OTTO Szabo

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. VARGA Gyula

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. SZABO Otto

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. 松野好洋

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. 若林公宏

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

YANAGI Kazuhisa 柳 和久

Research Projects

Research Products

Co-Researchers

Manufacture of calibration and measurement surface standards for areal surface texture measuring instruments and their international standardizationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of software gauge and material measure with large area to standardize analytic tools for surface topography dataPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Trial manufacturing of isotropic random surfaces for calibration and uncertainty analysis of surface profiling instrumentsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

表面テクスチャの三次元測定規範と形状評価パラメータの国際標準化支援研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Functional evaluation of surface waviness of contact recording magnetic disk and analytical estimation of head flying locusPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

YANAGI Kazuhisa 柳和久

[Journal Article] 面領域の表面性状測定機を対象とした測定標準に関する研究-第1報粗さ測定用標準面の設計-2010