• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

MORI KEN-ICHIRO  森 謙一郎

… Alternative Names

MORI Kenichiro  森 謙一郎

MORI Ken-ichiro  森 謙一郎

森 謙一朗  モリ ケンイチロウ

MORI Ken-ichro  森 謙一郎

Less
Researcher Number 80127167
Other IDs
  • ORCIDhttps://orcid.org/0000-0002-1872-5363
External Links
Affiliation (based on the past Project Information) *help 2019 – 2020: 豊橋技術科学大学, 工学(系)研究科(研究院), 特任教授
2014 – 2018: 豊橋技術科学大学, 工学(系)研究科(研究院), 教授
2010 – 2011: 豊橋技術科学大学, 大学院・工学研究科, 教授
2009: Toyohashi University of Technology, 工学部, 教授
2001 – 2006: 豊橋技術科学大学, 工学部, 教授 … More
1997 – 1999: 豊橋技術科学大学, 工学部, 教授
1994 – 1996: 大阪大学, 基礎工学部, 助教授
1990 – 1991: 大阪大学, 基礎工学部, 助教授
1989: 京都工芸繊維大学, 工芸学部, 助教授
1986 – 1987: Kyoto Institute of Technology・Research Assistant, 工芸学部, 助手 Less
Review Section/Research Field
Principal Investigator
Material processing/treatments / Materials/Mechanics of materials / Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments
Except Principal Investigator
機械工作 / 金属加工(含鋳造) / Production engineering/Processing studies / Material processing/treatments / 機械工作・生産工学 / Material processing/treatments / Materials/Mechanics of materials
Keywords
Principal Investigator
cold forming / long cup / seizure / multi-stage deep drawing / 冷間加工 / 極深容器 / 焼付き / 多段深絞り加工 / 通電加熱 / 超高張力鋼板 … More / 多孔質体 / 粉末粒子 / 粉末成形 / 有限要素法 / 高生産性 / 高強度部と高延性 / 冷却履歴部分制御 / 部分増肉 / 冷却履歴 / 冷却履歴制御 / テーラード / ホットスタンピング / warm and hot shearing / die quenching / springback / press forming / warm and hot forming / heating of sheet set into die / resistance heating / ultra high tensile strength steel sheet / 温・熱間せん断加工 / ダイクエンチ / スプリングバック / プレス成形 / 温・熱間成形 / 型内加熱 / solution heat treatment / oxide coating / titanium alloy sheet / 焼鈍し処理 / 溶体化熱処理 / 酸化被膜処理 / チタン合金板 / grain growth / diffusion / coupled method / viscoplastic finite element method / Monte Carlo method / sintering / micro-macro method / 粒成長 / 拡散 / 連成解析 / 粘塑性有限要素法 / モンテカルロ法 / 焼結 / マイクロ-マクロ解析法 / coating treatment / colored titanium sheet / pure titanium sheet / 皮膜処理 / カラーチタン板 / 純チタン板 / Porous Metal / Finite Element Method / Plastic Deformation / Powder Particle / Powder compaction / Particle Method / 塑性変形 / 粒子系解析法 / 電極材質 / 表面性状向上 / 局部加熱 / せん断加工 / 荷重低減 / 低加熱エネルギー / 小穴抜き加工 / ダイクエンチされた鋼板 / 金型寿命向上 / 切口面性状向上 / 低加熱エネルギー荷重低減 / 急速加熱 / 局部通電加熱 / 穴抜き加工 / シミュレーション / 偶応力 / 微視的特性 / コッセラ理論 … More
Except Principal Investigator
有限要素法 / 剛塑性有限要素法 / AI / 鍛造 / 塑性変形 / 接合 / サーボプレス / 再潤滑 / 潤滑 / 振動 / 塑性加工 / セラミックス / 油溜り / 先端くぼみ / スライドモーション / 焼付き防止 / 自動再潤滑 / せん断 / 焼付き / ボンデ処理 / リン酸塩皮膜処理 / Ironing / Plane Strain Compression Test / Balanced Biaxial Stretching / Work-hardening Characteristics / Anisotropic Yield Function / FLD / Cald Sheet Metal / 平面ひずみ圧縮変形の有限要素法シミュレーション / クラッド材のしごき加工 / プレス成形性 / エネルギ法による解析 / しごき加工 / 平面ひずみ圧縮試験 / 等二軸引張試験 / 応力-ひずみ曲線 / 異方性降伏条件 / 成形限界線図 / クラッド板 / Deformation Resistance / Optimum Forging Speed / Rigid-plastic Finite Element Method / Superplastic Forging / ひずみ速度感受性指数 / 変形抵抗表示式 / 鍛造速度の最適制御 / 超塑性鍛造 / Measurement of Friction / Nickel Alloy / Simulation; Titanium Alloy / Rigid-Plastic Finite Element Method / Flexible Forging / Ceramics / 摩擦特性 / チタニウム合金 / シミュレーション / 潤滑剤 / 摩擦測定 / ニッケル基合金 / チタニワム合金 / シミューレーション / 自由鍛造 / ceramic / cemented carbide / plastic deformation / wear resistance / surface treatment / manesium alloy / bonding / shot peening / 金属薄板 / セラミック / 硬質材料 / 耐摩耗性 / 表面改質 / マグネシウム合金 / ショットピーニング / Metallic Powder / Dies / Laser / Rapid Prototyping / セラミック粉末 / 高速3次元成形 / 金属粉末 / 金型 / レーザ / ラピッドプロトタイピング / Fuzzy / Neural Network / FEM / Simulation / Expert System / Process Design / Forging / ファジイ / ニュ-ラルネット / シミュレ-ション / エキスパ-トシステム / 工程設計 / 中空部品 / 圧潰 / 3段ヘミング加工 / 圧壊メカニズム / 3段ヘミング / めっき鋼板 / 圧縮メカニズム / プレス成形 / 変形集中の防止 / 圧縮荷重 / 中空部材 / 超高張力鋼板 / 超ハイテン / ヘミング / 摩擦 / 最潤滑 / 荷重振動 / 荷重低減 / 高精度 / 摩擦低減 / 板鍛造 / 微視的挙動 / 結晶粒配向 / 半溶融加工 / 磁性材料 / 個別要素法 / 焼結割れ / 焼結 / 圧粉成形 / ネットシェイプ成形 Less
  • Research Projects

    (19 results)
  • Research Products

    (45 results)
  • Co-Researchers

    (33 People)
  •  Development of tailored hot stamping having high productivity using partial control of cooling historyPrincipal Investigator

    • Principal Investigator
      MORI KEN-ICHIRO
    • Project Period (FY)
      2018 – 2020
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 26050:Material processing and microstructure control-related
    • Research Institution
      Toyohashi University of Technology
  •  Development of environmentally benign lubrication system using liquid lubricant with pulsating slide motion of servo press

    • Principal Investigator
      Maeno Tomoyoshi
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Yokohama National University
  •  Development of new hemming technology for joining ultra-high strength automobile parts

    • Principal Investigator
      Abe Yohei
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Toyohashi University of Technology
  •  Investigation of mechanism of load pulsation, and applying for forming of parts having small thickness

    • Principal Investigator
      MAENO Tomoyoshi
    • Project Period (FY)
      2010 – 2011
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Toyohashi University of Technology
  •  Development of shearing process of ultra-high strength steel sheets using local resistance heatingPrincipal Investigator

    • Principal Investigator
      MORI Kenichiro
    • Project Period (FY)
      2009 – 2011
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Toyohashi University of Technology
  •  Development of Warm and Hot Press Forming of Ultra High Strength Steel Sheets Using Resistance HeatingPrincipal Investigator

    • Principal Investigator
      MORI Ken-ichiro
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Toyohashi University of Technology
  •  Research of Multi-Stage Cold Deep Drawing Technique of Titanium Alloy SheetsPrincipal Investigator

    • Principal Investigator
      MORI Ken-ichiro
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Toyohashi University of Technology
  •  Research of Multi-Stage Cold Deep Drawing Technique of Long Pure Titanium CupsPrincipal Investigator

    • Principal Investigator
      MORI Ken-ichiro
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      Toyohashi University of Technology
  •  Micro-Macro Simulation Method for Sintering Process and Control of MicrostructurePrincipal Investigator

    • Principal Investigator
      MORI Ken-ichiro
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Toyohashi University of Technology
  •  Shot Lining of Light Metals with Hard Powder

    • Principal Investigator
      HARADA Yasunori
    • Project Period (FY)
      2001 – 2003
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      Himeji Institute of Technology
      Toyohashi University of Technology
  •  Microscopic Approach of Plastic Deformation of Particles and Coupled Analysis with Macroscopic ApproachPrincipal Investigator

    • Principal Investigator
      MORI Ken-ichiro
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Toyohashi University of Technology
  •  コッセラ連続体理論に基づく粉末粒子の微視的特性を考慮した粉末成形解析の新展開Principal Investigator

    • Principal Investigator
      森 謙一郎
    • Project Period (FY)
      1997
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Toyohashi University of Technology
  •  個別要素法と有限要素法を用いた磁性体半溶融加工のマイクローマクロシミュレーション

    • Principal Investigator
      小坂田 宏造
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Osaka University
  •  Laser Applied Rapid Prototyping of Metallic and Ceramic Dies

    • Principal Investigator
      OSAKADA Kozo
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Osaka University
  •  ファインセラミックス製品のネットシェイプ成形

    • Principal Investigator
      OSAKADA Kozo
    • Project Period (FY)
      1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      Osaka University
  •  A System for Computer Aided Design of Cold Forging Process

    • Principal Investigator
      OSAKADA Kozo
    • Project Period (FY)
      1989 – 1991
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Osaka University
  •  Work-hardening Characteristics and Forming Limit of Clad Sheet Metals.

    • Principal Investigator
      YAMAGUCHI Katsuhiko
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Kyoto Institute of Technology
  •  Optimum Control of Forging Speed in Superplastic Forging

    • Principal Investigator
      FUKUDA Masayoshi
    • Project Period (FY)
      1985 – 1986
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      Kyoto Institute of Technology
  •  Forging of Heat Resisting Alloy with Ceramic Dies

    • Principal Investigator
      OSAKADA Kozo
    • Project Period (FY)
      1984 – 1986
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      機械工作
    • Research Institution
      HIROSHIMA UNIVERSITY
      Kobe University

All 2021 2020 2019 2017 2016 2015 2012 2011 2010 2007 2006 2005

All Journal Article Presentation

  • [Journal Article] Punching test for estimating tensile strength and total elongation of steel sheets2021

    • Author(s)
      Nakamura Naotaka、Mori Ken-ichiro、Okada Hiroki、Abe Yohei
    • Journal Title

      The International Journal of Advanced Manufacturing Technology

      Volume: 114 Issue: 5-6 Pages: 1847-1858

    • DOI

      10.1007/s00170-021-06898-7

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Quenchability improvement and control simplification by ice mandrel in hot stamping of ultra-high strength steel hollow parts2021

    • Author(s)
      Talebi-Anaraki Ali、Maeno Tomoyoshi、Ikeda Ryohei、Morishita Kazui、Mori Ken-ichiro
    • Journal Title

      Journal of Manufacturing Processes

      Volume: 64 Pages: 916-926

    • DOI

      10.1016/j.jmapro.2021.02.037

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Minimisation of Heating Time for Full Hardening in Hot Stamping Using Direct Resistance Heating2020

    • Author(s)
      Maeno Tomoyoshi、Mori Ken-ichiro、Sakagami Masato、Nakao Yoshitaka、Talebi-Anaraki Ali
    • Journal Title

      Journal of Manufacturing and Materials Processing

      Volume: 4 Issue: 3 Pages: 80-80

    • DOI

      10.3390/jmmp4030080

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Hot stamping of non-rectangular steel sheets using resistance heating by local preheating2020

    • Author(s)
      Nakagawa Yuki、Mori Ken-ichiro、Nishikata Michiya
    • Journal Title

      Procedia Manufacturing

      Volume: 50 Pages: 298-302

    • DOI

      10.1016/j.promfg.2020.08.055

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Joining of Taper Nut and Bolt to Ultra-high Strength Steel Sheet by Punching2020

    • Author(s)
      Suzuki Yasutaka、Mori Ken-ichiro、Hosoya Ryo、Abe Yohei
    • Journal Title

      Journal of the Japan Society for Technology of Plasticity

      Volume: 61 Issue: 714 Pages: 154-158

    • DOI

      10.9773/sosei.61.154

    • NAID

      130007879862

    • ISSN
      0038-1586, 1882-0166
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Steel sheets partnered with quenchable sheet in hot stamping of tailor-welded blanks and its application to separation prevention of fractured components2020

    • Author(s)
      Mori Ken-ichiro、Suzuki Yasutaka、Yokoo Daisuke、Nishikata Michiya、Abe Yohei
    • Journal Title

      The International Journal of Advanced Manufacturing Technology

      Volume: 111 Issue: 3-4 Pages: 725-734

    • DOI

      10.1007/s00170-020-06100-4

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Combined process of hot stamping and mechanical joining for producing ultra-high strength steel patchwork components2020

    • Author(s)
      Mori Ken-ichiro、Kaido Tomoya、Suzuki Yasutaka、Nakagawa Yuki、Abe Yohei
    • Journal Title

      Journal of Manufacturing Processes

      Volume: 59 Pages: 444-455

    • DOI

      10.1016/j.jmapro.2020.10.025

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Tailored tempering without die heating in hot stamping of ultra-high strength steel parts2020

    • Author(s)
      Nakagawa Yuki、Mori Ken-ichiro、Suzuki Yasutaka、Shimizu Yuki
    • Journal Title

      Materials & Design

      Volume: 192 Pages: 108704-108704

    • DOI

      10.1016/j.matdes.2020.108704

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Delayed cracking in hot stamping with hot trimming for ultra-high strength steel components2019

    • Author(s)
      Yuki Nakagawa, Ken-ichiro Mori, Tomoyoshi Maeno, Ryo Umemiya
    • Journal Title

      International Journal of Advanced Manufacturing Technology

      Volume: 105 Issue: 12 Pages: 5081-5090

    • DOI

      10.1007/s00170-019-04599-w

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Effect of contact pressure in die quenching on strength of hot-stamped parts2019

    • Author(s)
      Naotaka Nakamura, Ken-ichiro Mori, Yuki Nakagawa, Takahiro Miyachi
    • Journal Title

      Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-performance Steel

      Volume: 7 Pages: 709-716

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01749
  • [Journal Article] Use of liquid lubricant for backward extrusion of cup with internal splines using pulsating motion2017

    • Author(s)
      T. Maeno, K. Mori, Y. Ichikawa, M. Sugawara
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 244 Pages: 273-281

    • DOI

      10.1016/j.jmatprotec.2017.02.001

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-15K05720
  • [Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012

    • Author(s)
      K.Mori, T.Maeno, Y.Maruo
    • Journal Title

      CIRP Annals-Manufacturing Technology

      Volume: 61(印刷中)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012

    • Author(s)
      K.Mori, T.Maeno, S.Fuzisaka
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 212 Issue: 2 Pages: 534-540

    • DOI

      10.1016/j.jmatprotec.2011.10.021

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012

    • Author(s)
      K. Mori, T. Maeno, Y. Maruo
    • Journal Title

      CIRP Annals. Manufacturing Technology

      Volume: 61-2

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012

    • Author(s)
      K. Mori, T. Maeno, S. Fuzisaka
    • Journal Title

      Journal of Materials Processing Technology

      Volume: 212-2 Pages: 534-540

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] バイパス通電加熱を用いたプレス成形による強度分布を有する超高張力鋼成形品の製造2011

    • Author(s)
      森謙一郎, Kittikul Mongkolkaji, 前野智美, 内田光隆, 上薗俊, 林貴文, 野田篤志
    • Journal Title

      塑性と加工

      Volume: 52 Pages: 801-805

    • NAID

      10029130227

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] ダイクエンチされた鋼板の局部通電加熱小穴抜き加工2011

    • Author(s)
      森謙一郎, 丸尾佳広, 前野智美
    • Journal Title

      塑性と加工

      Volume: 52 Pages: 1114-1118

    • NAID

      10029483857

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] Reduction of Friction in Compression of Plates by Load Pulsation2011

    • Author(s)
      T. Maeno, K. Osakada, K. Mori
    • Journal Title

      International Journal of Machine Tools & Manufacture

      Volume: 51-7-8 Pages: 612-617

    • Data Source
      KAKENHI-PROJECT-22760555
  • [Journal Article] ダイクエンチされた鋼板の局部通電加熱を用いた温・熱間小穴抜き加工2010

    • Author(s)
      前野智美, 丸尾佳広, 森謙一郎, 島田正美, 矢野洋
    • Journal Title

      平成22年度塑性加工春季講演会講演論文集

      Pages: 115-116

    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] 超高張力鋼板の局部通電加熱穴抜き加工2010

    • Author(s)
      森謙一郎, 藤阪靖二, 内田光隆, 上薗俊, 前野智美
    • Journal Title

      塑性と加工 (日本塑性加工学会誌) 51巻

      Pages: 55-59

    • NAID

      10025875931

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Journal Article] Die Quenching of Ultrahigh-Strength Steel Sheet Using Resistance Heating2007

    • Author(s)
      S.Maki, A.Hamamoto, S.Saito, K.Mori
    • Journal Title

      Journal of the Japan Society for Technology of Plasticity 48-553

      Pages: 140-144

    • NAID

      10018291814

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 抵抗加熱を利用した超高張力鋼板のダイクエンチ2007

    • Author(s)
      牧清二郎, 濱本篤, 斉藤翔一, 森謙一郎
    • Journal Title

      塑性と加工 48・553

      Pages: 140-144

    • NAID

      10018291814

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 超高張力鋼板の熱問プレス成形における酸化防止2007

    • Author(s)
      森謙一郎, 牧清二郎, 斉藤翔一, 岸本信, 林達志, 奥村俊彦
    • Journal Title

      塑性と加工 48・555

      Pages: 318-322

    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Hot Stamping and Press Quenching of Ultrahigh Strength Steel Sheet Using Resistance Heating2007

    • Author(s)
      S.Maki, A.Hamamoto, S.Saito, K.Mori
    • Journal Title

      Key Engineering Materials 344

      Pages: 309-316

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Prevention of Oxidation in Hot Stamping of Ultra High Strength Steel Sheets2007

    • Author(s)
      K.Mori, S.Maki, S.Saito, M.Kishimoto, T.Hayashi, T.Okumura
    • Journal Title

      Journal of the Japan Society for Technology of Plasticity 48-555

      Pages: 318-322

    • NAID

      10018418033

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Hot stamping and press quenching of ultrahigh strength steel sheet using resistance heating2007

    • Author(s)
      S.Maki, A.Hamamoto, S.Saito, K.Mori
    • Journal Title

      Key Engineering Materials 344

      Pages: 309-316

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Resistance Heating Characteristics of High-Strength Steel Sheet Blank for Hot Press Forming2007

    • Author(s)
      S.Maki, Y.Tanaka, K.Mori
    • Journal Title

      Key Engineering Materials 340-341

      Pages: 749-754

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Resistance heating characteristics of high-strength steel sheet blank for hot press forming2007

    • Author(s)
      S.Maki, Y.Tanaka, K.Mori
    • Journal Title

      Key Engineering Materials 340-341

      Pages: 749-754

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 超高張力鋼板の熱間プレス成形における酸化防止2007

    • Author(s)
      森謙一郎, 牧清二郎, 斉藤翔一, 岸本信, 林達志, 奥村俊彦
    • Journal Title

      塑性と加工 48・555

      Pages: 318-322

    • NAID

      10018418033

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 通電加熱を用いた超高張力鋼板のダイクエンチ2006

    • Author(s)
      森謙一郎, 牧清二郎
    • Journal Title

      日本鉄鋼協会第151回春季講演大会講演論文集 19・2

      Pages: 378-378

    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Application of Resistance Heating Technique to Hot Stamping of High-Strength Steel Sheet2006

    • Author(s)
      S.Maki, Y.Tanaka, K.Mori
    • Journal Title

      Journal of the Japan Society for Technology of Plasticity 47-544

      Pages: 394-398

    • NAID

      10016807555

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 高張力鋼板熱間プレス成形への抵抗加熱の応用2006

    • Author(s)
      牧清二郎, 田中祐樹, 森謙一郎
    • Journal Title

      塑性と加工 47・544

      Pages: 394-398

    • NAID

      10016807555

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 純チタンおよびチタン合金板の冷間多段深絞り加工2005

    • Author(s)
      森謙一郎
    • Journal Title

      型技術 20

      Pages: 38-41

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360386
  • [Journal Article] Warm and Hot Stamping of Ultra High Strength Steel Sheets2005

    • Author(s)
      K.Mori
    • Journal Title

      Press Working 43-9

      Pages: 23-26

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] 通電加熱を用いた高強度鋼板の温・熱間ハット曲げ2005

    • Author(s)
      森謙一郎, 牧清二郎
    • Journal Title

      日本鉄鋼協会第150回秋季講演大会講演論文集 18・5

      Pages: 1254-1254

    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] ウルトラハイテン材の温・熱間プレス成形技術2005

    • Author(s)
      森謙一郎
    • Journal Title

      プレス技術 43・9

      Pages: 23-26

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] チタン合金板の冷間多段深絞り加工2005

    • Author(s)
      森謙一郎
    • Journal Title

      プレス技術 43(印刷中)

    • NAID

      10012901501

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360386
  • [Journal Article] Cold multi-stage cold deep drawing of titanium alloy sheets2005

    • Author(s)
      Ken-ichiro Mori
    • Journal Title

      Die and Mould Technology 43-7(in printing)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360386
  • [Journal Article] プレコート防錆剤を用いた超高張力鋼板の熱間プレス成形2005

    • Author(s)
      岸本信, 牧清二郎, 斉藤翔一, 森謙一郎, 林達志, 奥村俊彦
    • Journal Title

      第56回塑性加工連合講演会講演論文集

      Pages: 385-386

    • Data Source
      KAKENHI-PROJECT-17360352
  • [Journal Article] Cold multi-stage cold deep drawing of pure titanium and titanium alloy sheets2005

    • Author(s)
      Ken-ichiro Mori
    • Journal Title

      Die and Mould Technology 20-6

      Pages: 38-41

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360386
  • [Presentation] ステンレス厚鋼板の穴抜き加工における振動モーションを用いたせん断面品質向上2016

    • Author(s)
      前野智美, 菅原稔, 森謙一郎
    • Organizer
      平成28年度 塑性加工春期講演会
    • Place of Presentation
      京都工芸繊維大学 松ヶ崎キャンパス
    • Year and Date
      2016-05-20
    • Data Source
      KAKENHI-PROJECT-15K05720
  • [Presentation] サーボプレスを用いた振動後方押出しによる内スプライン成形品の表面性状の向上2015

    • Author(s)
      前野智美,菅原稔, 森謙一郎
    • Organizer
      平成27年度 塑性加工春期講演会
    • Place of Presentation
      慶應義塾大学 矢上キャンパス
    • Year and Date
      2015-05-29
    • Data Source
      KAKENHI-PROJECT-15K05720
  • [Presentation] せん断・成形・ダイクエンチを一体化した1ショットホットスタンピング2011

    • Author(s)
      山田弘明,森謙一郎,前野智美,家田和典
    • Organizer
      第62回塑性加工連合講演会
    • Place of Presentation
      ホテル日航豊橋
    • Year and Date
      2011-10-27
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Presentation] 板歯車のホットブラシキング・ダイクエンチ2011

    • Author(s)
      前野智美, 山田弘明, 森謙一郎
    • Organizer
      平成23年度塑性加工春季講演会
    • Place of Presentation
      早稲田大学
    • Year and Date
      2011-05-29
    • Data Source
      KAKENHI-PROJECT-21360360
  • [Presentation] ダイクエンチ鋼板の局部通電加熱小穴抜き加工2011

    • Author(s)
      森謙一郎,丸尾佳広,前野智美
    • Organizer
      平成23年度塑性加工春季講演会
    • Place of Presentation
      早稲田大学
    • Year and Date
      2011-05-29
    • Data Source
      KAKENHI-PROJECT-21360360
  • 1.  OSAKADA Kozo (50031109)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 1 results
  • 2.  MAKI Seijiro (20124315)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 14 results
  • 3.  HARADA Yasunori (30218656)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 0 results
  • 4.  ABE Yohei (60402658)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 3 results
  • 5.  MAENO Tomoyoshi (80505397)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 18 results
  • 6.  GOU You (00252627)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 7.  FUKUDA Masayoshi (20027741)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  SHINAGAWA Kazunari (30215983)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  SHIOMI Masanori (90263227)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 10.  TAKAKURA Norio (40163183)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 11.  YAMAGUCHI Katsuhiko (90027805)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 12.  MURAO Takuji
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 13.  OKUBO Fujio
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 14.  KATO Takasi (90093012)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  KUDO Hideaki (90017848)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  NAKAMURA Simesu (10029431)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  TAKUDA Hirohiko (20135528)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  OTSU Masaaki (20304032)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  OKIMOTO Kunio (30268487)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  SEKIGUCHI Hideo (80043462)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  新家 光雄 (50126942)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 22.  中川 佑貴 (50837739)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 5 results
  • 23.  NAKAMURA Akihro
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  HORI Ayumi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 25.  ICHIKAWA Yuki
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 26.  KANAYAMA Kozo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 27.  MARUTANI Yoji
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 28.  UMEDA Manabu
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 29.  MATSUBARA Hideaki
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 30.  久保 勝司
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 31.  松野 建一
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 32.  MATSUNO Ken-ichi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 33.  KUBO Katsushi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi